I found 2 versions of the instruction about going back from custom ROM to stock OxygenOS. First one tells about ADB commands which results with full stock, with standard recovery, unrooted system and locked phone. The second one is shorter, it's just flashing official zip with TWRP.
So my question is: Am I "losing something" after going with the second option, I mean TWRP-way? As I understand the only difference is that I'll keep TWRP itself and my phone will still be unlocked, when everything else will be ok (official camera firmware, kernel, etc.).
Thank you in advance for the answer if I'm wrong
The official zips in most cases also erase your twrp recovery and you will end up with the stock recovery and unlocked bootloader
I'm also thinking about going back to Oxygenos. But haven't done it. Looking for answers for you question.
Besides, could you please give me the link for the first method? Thanks
It's like flashing any other Rom? You clean flash by wiping everything (except Internal) and flash the OxygenOS you want (plus SuperUser).
Heres what you gonna do
Download oos full zip
Flash it on twrp then after that dont do a reboot just flash twrp as recovery then reboot to recovery and then reboot to system
If you wanna lock the bootloader and stay fully stock ( this will wipe your whole phone so backup )
Then flash oos full zip through twrp then reboot to bootloader
Then sideload oos recovery
Then go back to bootloader and relock bootloader thats it
Sent from my ONEPLUS A3003 using Tapatalk
You want to ADB push?
Go to OnePlus site. There you have step by step instructions.
HIshan Pavidu said:
Heres what you gonna do
Download oos full zip
Flash it on twrp then after that dont do a reboot just flash twrp as recovery then reboot to recovery and then reboot to system
If you wanna lock the bootloader and stay fully stock ( this will wipe your whole phone so backup )
Then flash oos full zip through twrp then reboot to bootloader
Then sideload oos recovery
Then go back to bootloader and relock bootloader thats it
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I want to keep twrp and stay unlocked
1. flash the oos full zip
2. reboot to fastboot mode and flash twrp
3. go to twrp and reboot to system
Is this right?
Besides, I'm using twrp 3.0.4-1. Does it matter?
JonathanKang said:
I want to keep twrp and stay unlocked
1. flash the oos full zip
2. reboot to fastboot mode and flash twrp
3. go to twrp and reboot to system
Is this right?
Besides, I'm using twrp 3.0.4-1. Does it matter?
Click to expand...
Click to collapse
They both works but my way dont need a pc so
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
They both works but my way dont need a pc so
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Ahh. Got it.
JonathanKang said:
Ahh. Got it.
Click to expand...
Click to collapse
Good luck huh!
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
Good luck huh!
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I clean flashed the full zip. When I try to boot to bootloader, it didn't enter bootloader mode. The system boots, and it's been showing boot animation for more than ten minutes. I'll wait patiently.
BTW, how do you flash twrp while you are in twrp?
JonathanKang said:
I clean flashed the full zip. When I try to boot to bootloader, it didn't enter bootloader mode. The system boots, and it's been showing boot animation for more than ten minutes. I'll wait patiently.
BTW, how do you flash twrp while you are in twrp?
Click to expand...
Click to collapse
What i did was
Flashed the full zip
Before rebooting flashed twrp.img through twrp
Then reboot to twrp abd reboot to system i do it every time
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
What i did was
Flashed the full zip
Before rebooting flashed twrp.img through twrp
Then reboot to twrp abd reboot to system i do it every time
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
What I wanna ask is how do you flash twrp.img through twrp?
JonathanKang said:
What I wanna ask is how do you flash twrp.img through twrp?
Click to expand...
Click to collapse
When your on twrp go to install then to the right corner youll see a tab named flash img clikc that and browse to your twrp flash it then it will ask system , recovery or bootloader click recovery then flash when it finished reboot to recovery
I hope you understand if not just google it
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
When your on twrp go to install then to the right corner youll see a tab named flash img clikc that and browse to your twrp flash it then it will ask system , recovery or bootloader click recovery then flash when it finished reboot to recovery
I hope you understand if not just google it
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Okay. Never notice that tab in the corner.
So right now, I end up with oxygenos(still booting...) without twrp.
JonathanKang said:
Okay. Never notice that tab in the corner.
So right now, I end up with oxygenos(still booting...) without twrp.
Click to expand...
Click to collapse
Try holding power button till it restart and see if you can load to bootloader then sideload twrp then do what i said
Good luck
If it wont load bootloader i think its bricked or something
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
Try holding power button till it restart and see if you can load to bootloader then sideload twrp then do what i said
Good luck
If it wont load bootloader i think its bricked or something
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
Force shutdown the device and entered fastboot, flashed twrp recovery. And now twrp asks me to input password to decrypt data. I have no idea about what the password is. I also got dm-verity error after flashing the full zip. Help needed.
JonathanKang said:
Force shutdown the device and entered fastboot, flashed twrp recovery. And now twrp asks me to input password to decrypt data. I have no idea about what the password is. I also got dm-verity error after flashing the full zip. Help needed.
Click to expand...
Click to collapse
Im sorry i have to say this but you might wanna sideload oos recovery then sideload oos full zip and see if its boot then try again
Edit :- you might wanna wipe everything before sideload idk try without wiping anything
Sent from my ONEPLUS A3003 using Tapatalk
HIshan Pavidu said:
Im sorry i have to say this but you might wanna sideload oos recovery then sideload oos full zip and see if its boot then try again
Edit :- you might wanna wipe everything before sideload idk try without wiping anything
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
I did a factory reset in twrp, and the system boots well. But unfortunately I lost all my data. Factory reset also formats internal storage?
I have all my photos backed up in google photos. The only loss is the image quality is not original. Anyway it's not end of the world.
JonathanKang said:
I did a factory reset in twrp, and the system boots well. But unfortunately I lost all my data. Factory reset also formats internal storage?
I have all my photos backed up in google photos. The only loss is the image quality is not original. Anyway it's not end of the world.
Click to expand...
Click to collapse
Your good then right? Cuz i gotta go flash rr ?
Sent from my ONEPLUS A3003 using Tapatalk
Related
I wiped the internal storage on my phone by mistake and now my phone has no OS or ROM to flash it back on. I tried to sideload with TWRP but the feature wouldn't start. I flashed the stock recovery and tried to sideload it there but I get an "error: protocol fault (no status)"... I tried to mount storage on TWRP but that feature didn't seem to work on it either. It's a good thing that I still have my OnePlus One to use, but I would appreciate your help!!
Sent from my A0001 using Tapatalk
I had the same issue the first time I tried to add side load the stock rom, I tried it again and it worked. my suggestion is to try the side load again. Make sure your using the full rom zip.
k.s.deviate said:
I had the same issue the first time I tried to add side load the stock rom, I tried it again and it worked. my suggestion is to try the side load again. Make sure your using the full rom zip.
Click to expand...
Click to collapse
I tried like a thousand times on both stock and TWRP to no avail. When I reflashed TWRP and tried to sideload one last time it told me that I needed ADB version 1.0.32 which is what I should have because I installed the "15 seconds ADB Installer v1.4.3" from the stickied guide here on the OP3 forums... Anyway, I got access to the TWRP folder and the internal storage by just being in the TWRP recovery, not sure if it was always like that, but I just dragged and dropped the ROM and other flashables onto the phone... lol Maybe I was freaking out too much to notice, but why would anyone sideload anything if you could just drag and drop stuff while in TWRP and just flash? Maybe reflashing TWRP fixed something or I was using an older beta OP3 version before, I re-downloaded everything.
Sent from my A0001 using Tapatalk
I screwed up when I tried to update to 3.2.0 OOS. I were rooted so the installtion failed and I restored a corrupt backup with TWRP that resulted in a stuck boot logo.
I did this too fix this. boot into fastboot (if you still can) then make sure its connection properly. "fastboot devices". Then in your ADB folder place a TWRP.img and type "fastboot boot twrp.img" wait like 10 seconds, it will seem like it doesn't work but if you are a functional TWRP img it should boot up just fine. Select allowed modifications and then you can also access storage. There is a post on the oneplus forums where you can download signed full zips of the ROMS. download any of them. I will past in the post if I can find it later. Not home atm. Just copy the .zip onto the phone and then do a factory reset and flash the full rom and then reboot should work just fine. You don't need too flash TWRP just boot it if you still wanna keep stock recovery.
rickyx32 said:
I wiped the internal storage on my phone by mistake and now my phone has no OS or ROM to flash it back on. I tried to sideload with TWRP but the feature wouldn't start. I flashed the stock recovery and tried to sideload it there but I get an "error: protocol fault (no status)"... I tried to mount storage on TWRP but that feature didn't seem to work on it either. It's a good thing that I still have my OnePlus One to use, but I would appreciate your help!!
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Bro don't worry.
All you gotta do is to download a stock image.
Boot into fastboot.
Then use a toolkit like this one.
http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Then use his toolkit to download and boot in twrp.
Now copy paste a full signed zip onto the phone by connecting it to your PC .
http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870
Do a system and cache clean.
Flash the zip and make it boot before rooting it.
Done..!!
Joyo-rocker said:
Bro don't worry.
All you gotta do is to download a stock image.
Boot into fastboot.
Then use a toolkit like this one.
http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Then use his toolkit to download and boot in twrp.
Now copy paste a full signed zip onto the phone by connecting it to your PC .
http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870
Do a system and cache clean.
Flash the zip and make it boot before rooting it.
Done..!!
Click to expand...
Click to collapse
It worked bro thanks I was having data issues too before and now it all just works.
Sent from my ONEPLUS A3000 using Tapatalk
rickyx32 said:
It worked bro thanks I was having data issues too before and now it all just works.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
No prob bro...!
If I upgrade to 7.0 on my nexus 5x, will i be able to install twrp as i normally would through fastboot?
You need to decrypt the phone for it to work.
Hmm anyone got the 7.0 recovery? I installed it thinking it would work but I want to keep the system encrypted. Does the stock 7.0 recovery mount system? I want to mod my build.prop dpi.
trollyphysicist said:
If I upgrade to 7.0 on my nexus 5x, will i be able to install twrp as i normally would through fastboot?
Click to expand...
Click to collapse
Try TWRP 3.0.2-1, should work properly.
Sent from my Nexus 5X using Tapatalk
SlimSnoopOS said:
Try TWRP 3.0.2-1, should work properly.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
I just tried 3.0.2-1, and it worked. Before that, 3.0.2-0 also got stuck at the splash screen. However, I wasn't able to root. I tried installing SU via TWRP, but it didn't successfully root.
pkadavid said:
I just tried 3.0.2-1, and it worked. Before that, 3.0.2-0 also got stuck at the splash screen. However, I wasn't able to root. I tried installing SU via TWRP, but it didn't successfully root.
Click to expand...
Click to collapse
I had no issues obtaining root with the new twrp on an encrypted phone.
Am I the only one who encounters the flasing of recovery not sticking? After system reboot, then going back to recovery, it reverts to stock.
legendarren said:
Am I the only one who encounters the flasing of recovery not sticking? After system reboot, then going back to recovery, it reverts to stock.
Click to expand...
Click to collapse
Flash twrp, while still in bootloader volume down to reboot bootloader, hit the power button, volume down to reboot recovery, hit the power button. Twrp should stick now.
Sent from my Nexus 5X using Tapatalk
PiousInquisitor said:
Flash twrp, while still in bootloader volume down to reboot bootloader, hit the power button, volume down to reboot recovery, hit the power button. Twrp should stick now.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Thanks, man. But still TWRP still doesn't stick after system reboot.
legendarren said:
Thanks, man. But still TWRP still doesn't stick after system reboot.
Click to expand...
Click to collapse
If you decrypt it first by flashing the modified boot.img, and then flash recovery and reboot it should stick and work right? Can you kindly describe your steps?
Vanschtezla said:
If you decrypt it first by flashing the modified boot.img, and then flash recovery and reboot it should stick and work right? Can you kindly describe your steps?
Click to expand...
Click to collapse
Yes, I forgot about decrypting. It works fine now, thanks!!
legendarren said:
Yes, I forgot about decrypting. It works fine now, thanks!!
Click to expand...
Click to collapse
No problem mate ??
Vanschtezla said:
No problem mate ??
Click to expand...
Click to collapse
Which boot IMG did you use to decrypt the final release of n?
kevtrysmoddin said:
Which boot IMG did you use to decrypt the final release of n?
Click to expand...
Click to collapse
In my case I updated mine from DP5. I had my DP5 decrypted and rooted and update it using the flashfire app to flash the ota. I don't think any of the existing modified boot.img will work on the final release yet idk mate.
Vanschtezla said:
In my case I updated mine from DP5. I had my DP5 decrypted and rooted and update it using the flashfire app to flash the ota. I don't think any of the existing modified boot.img will work on the final release yet idk mate.
Click to expand...
Click to collapse
No probs
trollyphysicist said:
If I upgrade to 7.0 on my nexus 5x, will i be able to install twrp as i normally would through fastboot?
Click to expand...
Click to collapse
Just installed twrp and seeing if flashign super su stuck or not... Have to wait for modified boot images to decrypt, though
---------- Post added at 10:25 AM ---------- Previous post was at 10:14 AM ----------
trollyphysicist said:
If I upgrade to 7.0 on my nexus 5x, will i be able to install twrp as i normally would through fastboot?
Click to expand...
Click to collapse
Update-phone is decrypted after installing twrp, wiping userdate, rebooting twrp, flashing latest super su, rebooting
eggman618 said:
Hmm anyone got the 7.0 recovery? I installed it thinking it would work but I want to keep the system encrypted. Does the stock 7.0 recovery mount system? I want to mod my build.prop dpi.
Click to expand...
Click to collapse
3.0.2-1 TWRP that got released soon after I posted fixed any hanging issues.
eggman618 said:
3.0.2-1 TWRP that got released soon after I posted fixed any hanging issues.
Click to expand...
Click to collapse
-1 installs, but two issues if you're encrypted:
1) TWRP doesn't stick. After a restart, you won't be able to get back into TWRP and need to reflash it.
2) Installing SU via TWRP doesn't work. It runs into an error if you read the responses during the flash in TWRP.
We'll just have to be patient until the devs do their magic on the encrypted version.
pkadavid said:
-1 installs, but two issues if you're encrypted:
1) TWRP doesn't stick. After a restart, you won't be able to get back into TWRP and need to reflash it.
2) Installing SU via TWRP doesn't work. It runs into an error if you read the responses during the flash in TWRP.
We'll just have to be patient until the devs do their magic on the encrypted version.
Click to expand...
Click to collapse
If you root using phh's superuser and magisk, TWRP will stick. His solution also allows you to use Android Pay with root, albeit with a little hoop-jumping
http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
I had the twrp not sticking issue in the past. What has worked is to boot twrp, not flash it, then flash SU. Then boot back into the bootloader and flash twrp.
Sent from my Nexus 9 using XDA-Developers mobile app
i flashed the twrp garak using fastboot once i booted into twrp but when i returned using advanced reboot bam! stock recovery is back ..how to fix it guys i want twrp
Go to fastboot mode and reflash the twrp recovery.
CyberCaptainKaz said:
Go to fastboot mode and reflash the twrp recovery.
Click to expand...
Click to collapse
i tried bro but after rebooting my device when i boot into recovery it again changes into oxygen recovery
try to force decryption and then re-flash it again. It's easiest if you use the OnePlus toolkit available here: http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
I was having the same issue after going back to official OOS and wanting to switch over to my current rom which gave me issues since I didn't have modified TWRP.
The_Symbiote said:
try to force decryption and then re-flash it again. It's easiest if you use the OnePlus toolkit available here: http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
I was having the same issue after going back to official OOS and wanting to switch over to my current rom which gave me issues since I didn't have modified TWRP.
Click to expand...
Click to collapse
will it wipe everything means apps,internal storage ?
kriss singhania said:
will it wipe everything means apps,internal storage ?
Click to expand...
Click to collapse
Yes it will. The toolkit will allow you to perform a full backup that you can restore later.
You can try flashing twrp from the toolkit, to see if it works. In my experience it didn't work until I forced decryption.
Try:
1. Fastboot erase recovery
2. Fastboot flash recovery "TWRP"
Puddi_Puddin said:
Try:
1. Fastboot erase recovery
2. Fastboot flash recovery "TWRP"
Click to expand...
Click to collapse
sure I'll try it
kriss singhania said:
sure I'll try it
Click to expand...
Click to collapse
it worked bro I'm rooted and installed twrp..thnx
Damn, this helped me out as well.
I think you are using the community build?
Situation, i have bootloader unloacked but recovery stock, so i flash "twrp-3.0.3-x_blu_spark_v14-op3.img" but the recovery won't start.
Last twrp i have installed was it e it works well, but after install last beta i have this problem.
What i do wrong?!?
fraizzo said:
Situation, i have bootloader unloacked but recovery stock, so i flash "twrp-3.0.3-x_blu_spark_v14-op3.img" but the recovery won't start.
Last twrp i have installed was it e it works well, but after install last beta i have this problem.
What i do wrong?!?
Click to expand...
Click to collapse
That is not the latest TWRP by bluspark. Flash the latest one.
tnsmani said:
That is not the latest TWRP by bluspark. Flash the latest one.
Click to expand...
Click to collapse
where i can find .img last bluspark?
fraizzo said:
where i can find .img last bluspark?
Click to expand...
Click to collapse
https://forum.xda-developers.com/devdb/project/dl/?id=25628
Sent from my ONEPLUS A3003 using Tapatalk
fraizzo said:
where i can find .img last bluspark?
Click to expand...
Click to collapse
Here you go
https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Thanks, now i have another problem, when i enter in recovery i cannot decrypt with my sequence.
And when i reboot to system, then i try to enter to recovery i find stock recovery
fraizzo said:
Thanks, now i have another problem, when i enter in recovery i cannot decrypt with my sequence.
And when i reboot to system, then i try to enter to recovery i find stock recovery
Click to expand...
Click to collapse
If you can access the OS, change pin/password within the OS to something else, then back to the one you always use then go back to recovery and it should work.
Renosh said:
If you can access the OS, change pin/password within the OS to something else, then back to the one you always use then go back to recovery and it should work.
Click to expand...
Click to collapse
The OS works well, i change my sequence, then back to first sequence, flashed the twrp, it ask me to insert password (not sequence) i try but without success...
I try to translate pattern to number but without success
Code:
1 2 3
4 5 6
7 8 9
fraizzo said:
The OS works well, i change my sequence, then back to first sequence, flashed the twrp, it ask me to insert password (not sequence) i try but without success...
I try to translate pattern to number but without success
Click to expand...
Click to collapse
Means you are encrypted and somehow ****ed. Gotta love force encryption in OOS.
Puddi_Puddin said:
Means you are encrypted and somehow ****ed. Gotta love force encryption in OOS.
Click to expand...
Click to collapse
So what i have to do now?
fraizzo said:
So what i have to do now?
Click to expand...
Click to collapse
Well, if you are sure that you are on the right twrp version by Bluspark. Then I would start with a factory reset. Your phone is encrypted, somehow TWRP asks for a password that never has been setup.
Let's get into business.
On Android go to security settings and select swipe or none in security lock.
Reboot to fastboot, flash the latest TWRP V39, since you are already using bluspark TWRP I won't need to recommend it.
Reboot imediatly to TWRP, Data should get mounted now.
The TWRP version you are on at the moment is outdated, always use the latest build.
Chaplan said:
Let's get into business.
On Android go to security settings and select swipe or none in security lock.
Reboot to fastboot, flash the latest TWRP V39, since you are already using bluspark TWRP I won't need to recommend it.
Reboot imediatly to TWRP, Data should get mounted now.
The TWRP version you are on at the moment is outdated, always use the latest build.
Click to expand...
Click to collapse
I have wiped data and now i can enter in recovery, but if i reboot to os the recovery return stock. Why?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
fraizzo said:
I have wiped data and now i can enter in recovery, but if i reboot to os the recovery return stock. Why?
Inviato dal mio ONEPLUS A3003 utilizzando Tapatalk
Click to expand...
Click to collapse
Reflash TWRP, reboot to recovery, when prompted to give permission to modify system partition you should slide to Yes.
That will keep TWRP in place.
My phone is cripted! on settings i read phone cripted so when i flash twrp it ask me password...
I try to set NONE to security lock but some problem...
I don't want format data again...
Ok every time I flash rom it boots to boolaoder.
Instructions
Wipe dalvik cache,cache,data.
Flash rom then install then reboot then setup finish then reboot.flash kernel optional then magisk.
Can't get pass bootloader . Ease help thx and happy new yr to all
Sent from my Pixel 3 XL using Tapatalk
freddienuxx said:
Ok every time I flash rom it boots to boolaoder.
Instructions
Wipe dalvik cache,cache,data.
Flash rom then install then reboot then setup finish then reboot.flash kernel optional then magisk.
Can't get pass bootloader . Ease help thx and happy new yr to all
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
What rom are you flashing? And what is reboot.flash? Try flashing the rom and then twrp if you want to keep that, I'd recommend you do. Then boot into system to see if it's working ok. Then if it is go back and flash the kernel and magisk.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
What rom are you flashing? And what is reboot.flash? Try flashing the rom and then twrp if you want to keep that, I'd recommend you do. Then boot into system to see if it's working ok. Then if it is go back and flash the kernel and magisk.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
I'm trying to flash bootlegger rom. Instructions say factory reset then flash rom then.setup device. Then reboot to twrp flash kernel then magisk. I tried with other rooms same thing stuck in bootloader. @jd1639 what rom are you on? And also how do you flash rom?
Sent from my Pixel 3 XL using Tapatalk
freddienuxx said:
I'm trying to flash bootlegger rom. Instructions say factory reset then flash rom then.setup device. Then reboot to twrp flash kernel then magisk. I tried with other rooms same thing stuck in bootloader. @jd1639 what rom are you on? And also how do you flash rom?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
I'm currently on stock rom with Kirisakura Kernel, but I have used bootlegger and it works for me.
After you flash the rom and boot into system does it just boot to the bootloader? If it does then I would start over by flashing the factory image with the flash-all batch file with the -w removed. Then make sure it boots into the system. Then I'd boot twrp, wipe the device, install the rom, then install twrp and boot to system. If it boots then boot back into recovery, twrp, and flash magisk. I don't know what kernel you are trying to flash but I believe bootlegger includes the Kirisakura Kernel. I'm very impressed with this kernel so I would not try to flash another one. If you are flashing a different kernel which one is it? It's possible that the kernel is not compatible with the bootlegger rom and that is what is causing your device to only boot to the bootloader.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
I'm currently on stock rom with Kirisakura Kernel, but I have used bootlegger and it works for me.
After you flash the rom and boot into system does it just boot to the bootloader? If it does then I would start over by flashing the factory image with the flash-all batch file with the -w removed. Then make sure it boots into the system. Then I'd boot twrp, wipe the device, install the rom, then install twrp and boot to system. If it boots then boot back into recovery, twrp, and flash magisk. I don't know what kernel you are trying to flash but I believe bootlegger includes the Kirisakura Kernel. I'm very impressed with this kernel so I would not try to flash another one. If you are flashing a different kernel which one is it? It's possible that the kernel is not compatible with the bootlegger rom and that is what is causing your device to only boot to the bootloader.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Ok yea the furthest I get is after I flash bootlegger rom then twrp then I reboot to system that's when it goes straight to bootloader. I usually flash kernel and magisk after setup
Sent from my Pixel 3 XL using Tapatalk
freddienuxx said:
Ok yea the furthest I get is after I flash bootlegger rom then twrp then I reboot to system that's when it goes straight to bootloader. I usually flash kernel and magisk after setup
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
Start over by flashing the factory image, or at least the boot image to both slots. Boot is probably messed up right now. I'd flash the whole image as I suggested as some times system and other partitions get messed up too.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
Start over by flashing the factory image, or at least the boot image to both slots. Boot is probably messed up right now. I'd flash the whole image as I suggested as some times system and other partitions get messed up too.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
You think I should wipe the data?
Sent from my Pixel 3 XL using Tapatalk
freddienuxx said:
You think I should wipe the data?
Sent from my Pixel 3 XL using Tapatalk
Click to expand...
Click to collapse
No need to wipe data. When you to flash the rom I'd use the default wipe in twrp. Make a backup of the data partition in twrp before you wipe the device and store it off the device. You restore that after flashing the rom.
Sent from my [device_name] using XDA-Developers Legacy app