Completely wiped my phone, can't get stock ROM unto it... - OnePlus 3 Questions & Answers

I wiped the internal storage on my phone by mistake and now my phone has no OS or ROM to flash it back on. I tried to sideload with TWRP but the feature wouldn't start. I flashed the stock recovery and tried to sideload it there but I get an "error: protocol fault (no status)"... I tried to mount storage on TWRP but that feature didn't seem to work on it either. It's a good thing that I still have my OnePlus One to use, but I would appreciate your help!!
Sent from my A0001 using Tapatalk

I had the same issue the first time I tried to add side load the stock rom, I tried it again and it worked. my suggestion is to try the side load again. Make sure your using the full rom zip.

k.s.deviate said:
I had the same issue the first time I tried to add side load the stock rom, I tried it again and it worked. my suggestion is to try the side load again. Make sure your using the full rom zip.
Click to expand...
Click to collapse
I tried like a thousand times on both stock and TWRP to no avail. When I reflashed TWRP and tried to sideload one last time it told me that I needed ADB version 1.0.32 which is what I should have because I installed the "15 seconds ADB Installer v1.4.3" from the stickied guide here on the OP3 forums... Anyway, I got access to the TWRP folder and the internal storage by just being in the TWRP recovery, not sure if it was always like that, but I just dragged and dropped the ROM and other flashables onto the phone... lol Maybe I was freaking out too much to notice, but why would anyone sideload anything if you could just drag and drop stuff while in TWRP and just flash? Maybe reflashing TWRP fixed something or I was using an older beta OP3 version before, I re-downloaded everything.
Sent from my A0001 using Tapatalk

I screwed up when I tried to update to 3.2.0 OOS. I were rooted so the installtion failed and I restored a corrupt backup with TWRP that resulted in a stuck boot logo.
I did this too fix this. boot into fastboot (if you still can) then make sure its connection properly. "fastboot devices". Then in your ADB folder place a TWRP.img and type "fastboot boot twrp.img" wait like 10 seconds, it will seem like it doesn't work but if you are a functional TWRP img it should boot up just fine. Select allowed modifications and then you can also access storage. There is a post on the oneplus forums where you can download signed full zips of the ROMS. download any of them. I will past in the post if I can find it later. Not home atm. Just copy the .zip onto the phone and then do a factory reset and flash the full rom and then reboot should work just fine. You don't need too flash TWRP just boot it if you still wanna keep stock recovery.

rickyx32 said:
I wiped the internal storage on my phone by mistake and now my phone has no OS or ROM to flash it back on. I tried to sideload with TWRP but the feature wouldn't start. I flashed the stock recovery and tried to sideload it there but I get an "error: protocol fault (no status)"... I tried to mount storage on TWRP but that feature didn't seem to work on it either. It's a good thing that I still have my OnePlus One to use, but I would appreciate your help!!
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Bro don't worry.
All you gotta do is to download a stock image.
Boot into fastboot.
Then use a toolkit like this one.
http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Then use his toolkit to download and boot in twrp.
Now copy paste a full signed zip onto the phone by connecting it to your PC .
http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870
Do a system and cache clean.
Flash the zip and make it boot before rooting it.
Done..!!

Joyo-rocker said:
Bro don't worry.
All you gotta do is to download a stock image.
Boot into fastboot.
Then use a toolkit like this one.
http://forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Then use his toolkit to download and boot in twrp.
Now copy paste a full signed zip onto the phone by connecting it to your PC .
http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870
Do a system and cache clean.
Flash the zip and make it boot before rooting it.
Done..!!
Click to expand...
Click to collapse
It worked bro thanks I was having data issues too before and now it all just works.
Sent from my ONEPLUS A3000 using Tapatalk

rickyx32 said:
It worked bro thanks I was having data issues too before and now it all just works.
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
No prob bro...!

Related

S2 not booting past CM logo

Okay, everything seemed fine on my s2 until the latest CM download. I install it though CWM and it seems fine but then it says
set_metadata_recursive: some changes failed
E:Error in /sdcard/firmware/cm-11-20140619-NIGHTLY-hercules.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
Firmware is just the folder name for where i keep the files i may flash to it. I have tried other
I tried to install CM 10.2.0 and it seems to work. but then when i try and boot, it goes to the splash screen and just stays there. Did I do something wrong that is causing this?
Spud37 said:
Okay, everything seemed fine on my s2 until the latest CM download. I install it though CWM and it seems fine but then it says
Firmware is just the folder name for where i keep the files i may flash to it. I have tried other
I tried to install CM 10.2.0 and it seems to work. but then when i try and boot, it goes to the splash screen and just stays there. Did I do something wrong that is causing this?
Click to expand...
Click to collapse
"Set metadata recursive" probably means you are using a recovery that is too old.
@Spud37
Yes, it means your recovery is outdated. Here is a download link for the latest TWRP that you can flash in Odin as PDA. http://techerrata.com/file/twrp2/hercules/openrecovery-twrp-2.7.1.0-hercules.tar
This link came from teamwins website (teamw.in)
Sent from my SGH-T989
jrc2 said:
@Spud37
Yes, it means your recovery is outdated. Here is a download link for the latest TWRP that you can flash in Odin as PDA. http://techerrata.com/file/twrp2/hercules/openrecovery-twrp-2.7.1.0-hercules.tar
This link came from teamwins website (teamw.in)
Sent from my SGH-T989
Click to expand...
Click to collapse
Well there is another issue with my phone that I have actually worked around for awhile now. The MircoUSB on the phone is broken. I bought an extra battery and swap it, I also just use the SD card to copy anything to the phone. Is there a way for me to flash the phone with the new TWRP from the sd card. Why would the older TWRP not install CM 10.2.0 ROM? Do I have to go older perhaps? Thanks though. Knowing is half the battle
EDIT: Going to try and install 10.1.0 and see if it will let me boot. I figure once I can get it to boot, it will be easier to update the Recovery on the phone.
EDIT 2: No problems or errors occured when I installed CM 10.1.0.zip. However it still got stuck in a boot loop. I did however find a file called superwipe for the T mobile S2. I am wondering if that could help
EDIT 3: Okay so the superwipe worked and i am now running 10.1.0, Is it possible to install a Recovery from the phone without using odin?
What all did you wipe when you installed 10.1? There is a way to update the recovery if you can get the phone to boot. What is the latest thing you got to boot on your phone?
Sent from my HP Slate 7 using Tapatalk
jrc2 said:
What all did you wipe when you installed 10.1? There is a way to update the recovery if you can get the phone to boot. What is the latest thing you got to boot on your phone?
Sent from my HP Slate 7 using Tapatalk
Click to expand...
Click to collapse
I had wiped everything, formatted and fixed permissions, it didn't work. It wasn't until i found the Superwipe that installation worked and i was able to boot to 10.1.0. How can i update/change the recovery from the phone.
Thanks
Spud37 said:
I had wiped everything, formatted and fixed permissions, it didn't work. It wasn't until i found the Superwipe that installation worked and i was able to boot to 10.1.0. How can i update/change the recovery from the phone.
Thanks
Click to expand...
Click to collapse
It is a lot more risky if your usb port doesn't work, since you can't flash back to stock in Odin if something goes wrong. I would recommend that you get someone to fix that USB port before you make too many changes.
DISCLAIMER: I am not responsible for anything that happens to your phone. These changes could brick your phone if something goes wrong. Proceed at your own risk!
Okay, now for the tutorial. These instructions are assuming that you are already rooted. Download this file and make sure you check the md5sum. Rename it to TWRP.img and move it to /storage/sdcard. This will make the next steps easier. If you move the file somewhere else, make a note of the location of the file. If you have not already, install the terminal emulator app form the Play Store. Open it and type the following lines in it.
Code:
su
[CLICK ENTER]
Code:
dd if=/storage/sdcard/TWRP.img of=/dev/block/mmcblk0p22
(Change the path to wherever you moved the file to) [CLICK ENTER]
Reboot into recovery and wipe cache and dalvik. Reboot. If recovery says that system recovery will override it on reboot, click fix. This should update your recovery.
Have a good afternoon,
jrc2

Nexus 5x in google logo. Cannot flash factory image

I wanted t oinstall Cm13 so booted into bootloader and unlocked it.
Then I installed TWRP 2.8.7.2 as my recovery. Then booted into recovery and flashed CM13 of 20/12.
It then started bootlooping the bootanimation. I waited for half an hour. The phone became heated and I switched it off.
I then decided to go back to stock 6.0.1 but I could flash using flash-all.sh. I then decided to flash manually each image and was able to flash boot, cache and recovery. But cannot flash system and vendor. Can someone help me i this.
Can anyone provide a twrp backup that I can use. (I didn't do a backup myself).
Please can someone help. Just bought the phone 2 days back. Please help.
eNVy said:
I wanted t oinstall Cm13 so booted into bootloader and unlocked it.
Then I installed TWRP 2.8.7.2 as my recovery. Then booted into recovery and flashed CM13 of 20/12.
It then started bootlooping the bootanimation. I waited for half an hour. The phone became heated and I switched it off.
I then decided to go back to stock 6.0.1 but I could flash using flash-all.sh. I then decided to flash manually each image and was able to flash boot, cache and recovery. But cannot flash system and vendor. Can someone help me i this.
Can anyone provide a twrp backup that I can use. (I didn't do a backup myself).
Please can someone help. Just bought the phone 2 days back. Please help.
Click to expand...
Click to collapse
post a screenshot from cmd here to see the error you get from fastboot...
kopfik said:
post a screenshot from cmd here to see the error you get from fastboot...
Click to expand...
Click to collapse
There is no error. When I manually try to flash system or vendor there is the message sending 'vendor' or sending 'system' and gets stuck with that message. waited for almost half an hour and still no change.
When I booted into twrp, it says cannot mount /vendor and /system.
Edit : I use Linux by the way.
eNVy said:
There is no error. When I manually try to flash system or vendor there is the message sending 'vendor' or sending 'system' and gets stuck with that message. waited for almost half an hour and still no change.
When I booted into twrp, it says cannot mount /vendor and /system.
Edit : I use Linux by the way.
Click to expand...
Click to collapse
well, interesting. i've never experienced problem like you have... have you already tried to do it in windows? or install TWRP v2.8.7.0 and format partitions in that version and then reflash original ROM. but remember, with 2.8.7.0 you wont be able to flash CM13 (at least on my N5X i wasn't....)
kopfik said:
well, interesting. i've never experienced problem like you have... have you already tried to do it in windows? or install TWRP v2.8.7.0 and format partitions in that version and then reflash original ROM. but remember, with 2.8.7.0 you wont be able to flash CM13 (at least on my N5X i wasn't....)
Click to expand...
Click to collapse
Shouldn't you be using the latest twrp 2.8.7.2? Ive had issues flashing roms without using the latest version. You could also have issues with older versions of twrp and encryption. Id suggest wiping data from twrp and then flashing the factory image from bootloader.
Sent from my Nexus 5X using Tapatalk
Im in the exact same situation and my fastboot is broken. My PC isnt recognizing a device is attached anymore. No system or vendor mount in twrp
I think to be able to really do anything you need to get into bootloader and have fastboot recognize the device. Make sure the files from 6.01 are all correct and you're flashing in the right order. Follow the guide item #8 http://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930 If you can get the system.img and vendor.img flashed and then lock the bootloader it will wipe everything to factory, internal storage included. If you do that you must have stock recovery.img flashed as well. If downloading system.img hangs reboot and try it again.
kopfik said:
well, interesting. i've never experienced problem like you have... have you already tried to do it in windows? or install TWRP v2.8.7.0 and format partitions in that version and then reflash original ROM. but remember, with 2.8.7.0 you wont be able to flash CM13 (at least on my N5X i wasn't....)
Click to expand...
Click to collapse
Sorry, I was using v.2.8.7.2.
mnehring said:
Im in the exact same situation and my fastboot is broken. My PC isnt recognizing a device is attached anymore. No system or vendor mount in twrp
Click to expand...
Click to collapse
I got it to work. I just had to change the USB port.
Why don't you try a different USB port or a different cable. Or even try on a different computer.

Can't boot into recovery after cm14.1 nightly official

So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Thanks a lot guys, that did the trick, and done with flashify
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!
HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...
m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me
This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!
gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..
After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.
Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life

My 1+ 3 won´t boot recovery or system

hey guys,
i have a big problem.
i unlocked my one+ 3 2 weeks ago and installed twrp and cm13. all worked fine.
yesterday i read the news from cm the first devices will get offical cm14.
so i donwloaded the first rom and updated my phone (without a wipe!).
the cm14 starts good and all worked fine.
But, i find out, i can´t hear a phone call.
so, i want to go back to the twrp to restore my backup of cm13.
the problems begins....
i can´t boot twrp. i see the bootloader screen and after switching the screen to recovery (normaly) i got a black screen (seems like to shut off the screen).
then i tried to reinstall it, nothing.
after a full evening of trying i wiped it (factory reset) from android 7.
after the reboot i got the same problem. -> black screen after bootscreen Android won´t start, recovery won´t start.
then i downloaded a toolbox and installed the stock recovery -> no change -> black screen.
then i tried to find a stock image als *.img format to flash it with all (kernel and recovery, etc) with fastboot, but i didn´t find an image.
my last try was to make a full wipe with "fastboot -w". but this won´t work too.
so, now my phone will only boot into fastboot and thats it.
i need urgend help.
can anyone tell me what i can do? how can i install any os and wipe via fastboot and with no recovery?
thx a lot for your help.
ravn
ravn83 said:
hey guys,
i have a big problem.
i unlocked my one+ 3 2 weeks ago and installed twrp and cm13. all worked fine.
yesterday i read the news from cm the first devices will get offical cm14.
so i donwloaded the first rom and updated my phone (without a wipe!).
the cm14 starts good and all worked fine.
But, i find out, i can´t hear a phone call.
so, i want to go back to the twrp to restore my backup of cm13.
the problems begins....
i can´t boot twrp. i see the bootloader screen and after switching the screen to recovery (normaly) i got a black screen (seems like to shut off the screen).
then i tried to reinstall it, nothing.
after a full evening of trying i wiped it (factory reset) from android 7.
after the reboot i got the same problem. -> black screen after bootscreen Android won´t start, recovery won´t start.
then i downloaded a toolbox and installed the stock recovery -> no change -> black screen.
then i tried to find a stock image als *.img format to flash it with all (kernel and recovery, etc) with fastboot, but i didn´t find an image.
my last try was to make a full wipe with "fastboot -w". but this won´t work too.
so, now my phone will only boot into fastboot and thats it.
i need urgend help.
can anyone tell me what i can do? how can i install any os and wipe via fastboot and with no recovery?
thx a lot for your help.
ravn
Click to expand...
Click to collapse
Lots off people are getting this problem and trust me for some reason people post steps to fix this that are complicated for people who are just getting to playing around with TWRP.
Look, download the original TWRP recovery from here, https://dl.twrp.me/oneplus3/ the one you need is the 3.0.2-1 . I used it and I got back to MC13 From MC14.1 which by the way is now working pretty good. Once you fastboot flash recovery .this 3.0.2-1 recovery you can actually use it with MC14.1 as am doing right now. In any case. flash recovery >factory reset > adb your MC13 Zip to the phone > reboot...
Remember All Of This Steps Are Always Taken At Your Own Risk !!
Best of luck!!! [emoji6]
Sent from my ONEPLUS A3000 using Tapatalk
DiMatador said:
Lots off people are getting this problem and trust me for some reason people post steps to fix this that are complicated for people who are just getting to playing around with TWRP.
Look, download the original TWRP recovery from here, https://dl.twrp.me/oneplus3/ the one you need is the 3.0.2-1 . I used it and I got back to MC13 From MC14.1 which by the way is now working pretty good. Once you fastboot flash recovery .this 3.0.2-1 recovery you can actually use it with MC14.1 as am doing right now. In any case. flash recovery >factory reset > adb your MC13 Zip to the phone > reboot...
Remember All Of This Steps Are Always Taken At Your Own Risk !!
Best of luck!!! [emoji6]
Sent from my ONEPLUS A3000 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply.
to flash only the new recovery will not help.
tomorrow i will try to flash, wipe (with "fastboot -w" and copy the zip file.
Will the copy install the cm13 version? or do u mean sideload to have the cm13 zip for the twrp to flash?
Try to flash the modified twrp. Check the official topic for cm 14, it is linked over there
Edit: this one http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
superiscch said:
Try to flash the modified twrp. Check the official topic for cm 14, it is linked over there
Edit: this one http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
@superiscch just provided you with the TWRP that works. This is what i did !
Flash the recovery provided on the link >boot to the new recovery, you well see the version at the top left corner as 3.0.2-1 > factory reset > adb sideload the MC 13 ....... Reboot system > than add your choice of google apps to the sdcard root > reboot to recovery > flash google apps from with recovery than reboot, you would be golden. After, if your interested just flash the TWRP from the original twrp team. Cuss the one you just installed is modified, it be your choice !!
Sent from my ONEPLUS A3000 using Tapatalk
Hey guys,
thx for your replay. i will try it after work.
but i have one question ... what do u mean exactly with " adb your MC13 Zip"?
do u mean to transfer the zip to install with twrp or is there a command to install the zip to the systempartition?
ravn83 said:
Hey guys,
thx for your replay. i will try it after work.
but i have one question ... what do u mean exactly with " adb your MC13 Zip"?
do u mean to transfer the zip to install with twrp or is there a command to install the zip to the systempartition?
Click to expand...
Click to collapse
Okay... Look, once you have flash the modified recovery and you reboot. You be able to boot to your OS. Than you have to simple options 1. Load the CM13 ZIP file to your sdcard which you can use for installing with recovery
2. Boot into recovery and side load the MC 13 ZIP file into your phone using adb...sideload would be using adb
ADB... adb sideload <name of file> without the brackets...
Good luck man
Sent from my ONEPLUS A3000 using Tapatalk
Thx a lot guys, now it works and in installed my phone successfully.
it was the wrong twrp version.
now, the weekend is save :silly:
ravn83 said:
Thx a lot guys, now it works and in installed my phone successfully.
it was the wrong twrp version.
now, the weekend is save :silly:
Click to expand...
Click to collapse
Alriiiight !!
Sent from my ONEPLUS A3000 using Tapatalk

I tried to unroot my Honor 7X and failed

Hi,
So this morning I decided to root my phone (BND-L21)
I did it! But I realise I couldn't use Snapchat since being rooted didn't allow me. After going through various methods, I gave up and was left with the only guaranteed method, which was to unroot my phone.
I got stuck in a bootloop after pressing the unroot button in SuperSU.
I can access TWRP mode, Recovery mode, and the Rescue mode or something.
The Recovery mode which used wifi to reset my phone by installing a fresh rom had failed..
The rescue mode i have no idea what to do with (neither do I have any idea about ADB to help me out here)
In TWRP mode, i wiped everything and formatted data, hoping something would happen because nothing else did.
Everything I tried to do, I would just end up back in the booting screen with "Your device is.....booting...."
On my PC, it recognises my honor 7x in RECOVERY if I type in adb devices.
I'm believe I'm almost at a critical stage of turning my phone into a brick.
I tried downloading stock rom and installing it from TWRP mode but it came up with "UPDATER PROCESS ENDED WITH ERROR: 9"
Please help. I can't afford another one, nor do I have a backup phone. It says I have no current ROM if I intend to reboot my phone.
pausethegame said:
Hi,
So this morning I decided to root my phone (BND-L21)
I did it! But I realise I couldn't use Snapchat since being rooted didn't allow me. After going through various methods, I gave up and was left with the only guaranteed method, which was to unroot my phone.
I got stuck in a bootloop after pressing the unroot button in SuperSU.
I can access TWRP mode, Recovery mode, and the Rescue mode or something.
The Recovery mode which used wifi to reset my phone by installing a fresh rom had failed..
The rescue mode i have no idea what to do with (neither do I have any idea about ADB to help me out here)
In TWRP mode, i wiped everything and formatted data, hoping something would happen because nothing else did.
Everything I tried to do, I would just end up back in the booting screen with "Your device is.....booting...."
On my PC, it recognises my honor 7x in RECOVERY if I type in adb devices.
I'm believe I'm almost at a critical stage of turning my phone into a brick.
I tried downloading stock rom and installing it from TWRP mode but it came up with "UPDATER PROCESS ENDED WITH ERROR: 9"
Please help. I can't afford another one, nor do I have a backup phone. It says I have no current ROM if I intend to reboot my phone.
Click to expand...
Click to collapse
formating in twrp was not a good idea. These huawei phones have "other" files that system needs stored on /data. The stock recovery skips these files when doing a reset, twrp does not.
you should probably flash fullOTA to get back to working stock now.
try to follow this guide.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
mrmazak said:
formating in twrp was not a good idea. These huawei phones have "other" files that system needs stored on /data. The stock recovery skips these files when doing a reset, twrp does not.
you should probably flash fullOTA to get back to working stock now.
try to follow this guide.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
Um, the situation changed quite drastically.
I can't access TWRP anymore and when I plugged my phone in to my computer it detects it as a disk drive...
Can I still flash stock rom using sd card or anything else?
(Also, i sent it to a repair shop today and they'll get back to me tomorrow.)
pausethegame said:
Um, the situation changed quite drastically.
I can't access TWRP anymore and when I plugged my phone in to my computer it detects it as a disk drive...
Can I still flash stock rom using sd card or anything else?
(Also, i sent it to a repair shop today and they'll get back to me tomorrow.)
Click to expand...
Click to collapse
You asked in pm for details on hwota
I already give you link here for that .
mrmazak said:
You asked in pm for details on hwota
I already give you link here for that .
Click to expand...
Click to collapse
Oh ok. Will this method work even if I don't have any OS installed on my phone?
Also, are the 3 files you mentioned in your post refer to the ones within the filelist of Firmware Finder?
pausethegame said:
Oh ok. Will this method work even if I don't have any OS installed on my phone?
Also, are the 3 files you mentioned in your post refer to the ones within the filelist of Firmware Finder?
Click to expand...
Click to collapse
yes(should) and yes.
mrmazak said:
yes(should) and yes.
Click to expand...
Click to collapse
Ok. Do I extract the 3 update zips into the HWOTA folder or do I just copy the 3 update zips?
Thanks so much!!
pausethegame said:
Ok. Do I extract the 3 update zips into the HWOTA folder or do I just copy the 3 update zips?
Thanks so much!!
Click to expand...
Click to collapse
copy.

Categories

Resources