Develop Bugs

[Q] Bricked?

Hi
After rooting, I managed to wipe dalvik cache and internal. I'm trying to install stock rom from TWRP, but it always says that its unable to open .zip file. When connecting to USB the MTP USB driver fails (I've tried all the attempts with in getting in into download mode, but with no luck). I've got TWRP 2.3.2.3. Any ideas or ROM's which I can boot with here is my device bricked?

PhoTonic said:
Hi
After rooting, I managed to wipe dalvik cache and internal. I'm trying to install stock rom from TWRP, but it always says that its unable to open .zip file. When connecting to USB the MTP USB driver fails (I've tried all the attempts with in getting in into download mode, but with no luck). I've got TWRP 2.3.2.3. Any ideas or ROM's which I can boot with here is my device bricked?
Click to expand...
Click to collapse
Try to install another rom or check the drivers at your computer(By uninstalling them at device manager), connect it to another pc and see if that works. Aslong as your phone can boot into download there shouldn't be anything to be worried about. You could also try to download philz recovery. Either by flashing it, if you manage to get download mode working, or trying that zip to be installed in TWRP.
http://d-h.st/users/philz_touch/?fld_id=16053#files
I don't like TWRP at all as it has brought me bad expiriences. I'd rather choose Philz recovery, which is just the stock way of installing them zips .
Hope you can get further by these instructions, Good luck. If you got any questions; instead of finding them out yourself, just ask :laugh:

Armazia said:
Try to install another rom or check the drivers at your computer(By uninstalling them at device manager), connect it to another pc and see if that works. Aslong as your phone can boot into download there shouldn't be anything to be worried about. You could also try to download philz recovery. Either by flashing it, if you manage to get download mode working, or trying that zip to be installed in TWRP.
http://d-h.st/users/philz_touch/?fld_id=16053#files
I don't like TWRP at all as it has brought me bad expiriences. I'd rather choose Philz recovery, which is just the stock way of installing them zips .
Hope you can get further by these instructions, Good luck. If you got any questions; instead of finding them out yourself, just ask :laugh:
Click to expand...
Click to collapse
Thanks for the reply! philz did get installed with TWRP and worked after next reboot. But I'm still getting the same message when I try "Install zip" and select the below roms. You know any rom which work for sure? It says Cant open <ROM-Filepath> (bad) on both. The zipfiles are openable through windows
N7100XXDMC3_N7100OXXDMC2_NEE (Stock N7100 for nordic countries)
GT-N7100_WanamLite.XXUEMI6.V4.0.NO-WIPE.zip

PhoTonic said:
Thanks for the reply! philz did get installed with TWRP and worked after next reboot. But I'm still getting the same message when I try "Install zip" and select the below roms. You know any rom which work for sure? It says Cant open <ROM-Filepath> (bad) on both. The zipfiles are openable through windows
N7100XXDMC3_N7100OXXDMC2_NEE (Stock N7100 for nordic countries)
GT-N7100_WanamLite.XXUEMI6.V4.0.NO-WIPE.zip
Click to expand...
Click to collapse
Hmm, very strange. Are you installing from a sdcard? Maybe it is corrupted so it doesn't install. You could try placing the zip file into your internal storage and then try to install it from here.

Armazia said:
Try to install another rom or check the drivers at your computer(By uninstalling them at device manager), connect it to another pc and see if that works. Aslong as your phone can boot into download there shouldn't be anything to be worried about. You could also try to download philz recovery. Either by flashing it, if you manage to get download mode working, or trying that zip to be installed in TWRP.
http://d-h.st/users/philz_touch/?fld_id=16053#files
I don't like TWRP at all as it has brought me bad expiriences. I'd rather choose Philz recovery, which is just the stock way of installing them zips .
Hope you can get further by these instructions, Good luck. If you got any questions; instead of finding them out yourself, just ask :laugh:
Click to expand...
Click to collapse
I think you can only flash stock through odin on your computer.
Sent from my GT-N7100 using xda app-developers app
---------- Post added at 09:10 PM ---------- Previous post was at 09:10 PM ----------
PhoTonic said:
Thanks for the reply! philz did get installed with TWRP and worked after next reboot. But I'm still getting the same message when I try "Install zip" and select the below roms. You know any rom which work for sure? It says Cant open <ROM-Filepath> (bad) on both. The zipfiles are openable through windows
N7100XXDMC3_N7100OXXDMC2_NEE (Stock N7100 for nordic countries)
GT-N7100_WanamLite.XXUEMI6.V4.0.NO-WIPE.zip
Click to expand...
Click to collapse
I think you can only install stock through odin.
On your computer.
Sent from my GT-N7100 using xda app-developers app

It was actually my usb2microSD which was faulty. It was messing up all the files it was writing and the funny thing was that windows7 reported all file copies as success. Anyhow, its fixed once I got the .,zip files copied correctly. That was the only way too (through sd load) ODIN coul'd make a connection. Thx for all the help!

[Q] Tab 3 Lite (T110) recovery/root?

Is there any way to flash custom recovery to Tab3 Lite?
And root it then.
T210 recovery does not work correctly and I can't find the one specific to Lite version.

bmaggot said:
Is there any way to flash custom recovery to Tab3 Lite?
And root it then.
T210 recovery does not work correctly and I can't find the one specific to Lite version.
Click to expand...
Click to collapse
When you say the T210 version doesn't work correctly, what exactly does not work?
Sent from my SCH-I605

gr8nole said:
When you say the T210 version doesn't work correctly, what exactly does not work?
Click to expand...
Click to collapse
I get incorrectly centered letters "T210" and there's exclamation sign in yellow triangle when trying to enter download mode or recovery after installing TWRP recovery.tar.md5 for T210 with ODIN.
Android boots, but I can't enter download mode.
Had to do a reinitialization with KIES.

Nothing actually.

I'll probably port cwm myself if I manage to bet through all these compilation errors I'm getting...
Sent from my Nexus 4 using xda app-developers app

No root for t110?

Still I'm not able to port CWM.
Maybe someone more knowledgeable will do that.

bmaggot said:
Still I'm not able to port CWM.
Maybe someone more knowledgeable will do that.
Click to expand...
Click to collapse
But you have root?

wesvista said:
But you have root?
Click to expand...
Click to collapse
No. Can't root without recovery.

bmaggot said:
No. Can't root without recovery.
Click to expand...
Click to collapse
Oke thanks was hoping you had a adb exploit from somewhere xD

Post the stock recovery.img here and I will take a look and may be able to get a CWM recovery for you. No promises.

Alright, thanks.
Attached recovery.

bmaggot said:
Alright, thanks.
Attached recovery.
Click to expand...
Click to collapse
Attached is an attempt at CWM 6.0.4.5 for T110 ported from the T210 version.
I compiled the T110 kernel from sources with a few modifications that I hope will make this work correctly.
I have not tested this recovery since I don't have a T110.
Make sure you have the stock T110 recovery that you can reflash in Odin if this doesn't boot (posted above).
Unzip the attached file and use Odin to flash the "recovery.tar.md5" file. Remember to uncheck auto reboot in Odin and boot directly to recovery when you get the "RES OK" message in Odin.
Please report back.
See my other recovery threads in the development section for how to use Odin to flash a recovery.
Flash at your own risk.
EDIT: Didn't work correctly. Attachment removed (will try again tomorrow).

gr8nole said:
Attached is an attempt at CWM 6.0.4.5 for T110 ported from the T210 version.
I compiled the T110 kernel from sources with a few modifications that I hope will make this work correctly.
I have not tested this recovery since I don't have a T110.
Make sure you have the stock T110 recovery that you can reflash in Odin if this doesn't boot (posted above).
Unzip the attached file and use Odin to flash the "recovery.tar.md5" file. Remember to uncheck auto reboot in Odin and boot directly to recovery when you get the "RES OK" message in Odin.
Please report back.
See my other recovery threads in the development section for how to use Odin to flash a recovery.
Flash at your own risk.
Click to expand...
Click to collapse
Oke it's not working for me.
Screen goes black when reboot to recovery without device reboot
If i reboot and then go to recovery i get 3e recovery again.
Could you help me?
Sent from my SM-T110 using XDA Premium 4 mobile app

Try again. When recovery doesn't boot correctly, reboot into the OS and send me the /proc/last_kmsg and /cache/recovery/last_log.
Sent from my SCH-I605

gr8nole said:
Try again. When recovery doesn't boot correctly, reboot into the OS and send me the /proc/last_kmsg and /cache/recovery/last_log.
Sent from my SCH-I605
Click to expand...
Click to collapse
last_kmsg
last_log gives me does no exist

wesvista said:
last_kmsg
last_log gives me does no exist
Click to expand...
Click to collapse
Did you flash the CWM recovery again before sending this last_kmsg?

gr8nole said:
Did you flash the CWM recovery again before sending this last_kmsg?
Click to expand...
Click to collapse
I get does not exist on both now ??
Pulling full /proc/ xD hope that works
Maybe this kmsg shows some info

wesvista said:
I get does not exist on both now ??
Pulling full /proc/ xD hope that works
Maybe this kmsg shows some info
Click to expand...
Click to collapse
Ok, I'll try again tomorrow when I get back to my build box.

gr8nole said:
Ok, I'll try again tomorrow when I get back to my build box.
Click to expand...
Click to collapse
Thanks

KitKat ROMS dont work with TWRP 2.2.2.1

I have sucessfully installed CM 10.2, it frequently shuts itself off (but never when the screen is on). I suspect this is a ROM issue. I would like to flash a new ROM that is KitKat based, because those are the only ones that i can seem to find and i would think there would be some performance upgrade. I've tried to flash a couple KitKat ROMs already and they give me a "status 7", which if im not mistaken is due to the TWRP version not being compatible with KitKat. I've looked all around for an updated TWRP version and all i have found is .img files (this is a no go for me because adb is just very difficult on my computer right now).
Edit: found a .zip file but it says blaze instead of otter, would this be compatible?

that's the right one

no for CM11 you need TWRP 2.6.3.0 or better
http://forum.xda-developers.com/showthread.php?t=1591850
from OP
If you have problems with that file and/or don't want to use adb/fastboot flash method, you can download a flashable .zip from the following locations. Use your existing recovery to flash the update:
Mirror 1: Download (Goo.im)
Click to expand...
Click to collapse

sd_shadow said:
no for CM11 you need TWRP 2.6.3.0 or better
http://forum.xda-developers.com/showthread.php?t=1591850
from OP
Click to expand...
Click to collapse
cant seem to get the updated version to work, the flash was sucessful but the version still shows as 2.2.2.1. is there anything special that i was suppsoed to do to flash? im guessing adb might be my only option. and thanks for the speedy reply

did you verify the md5? 7f2e2f0b87349b1a2cd4fbcbe2f35a87
Verify that your downloads are complete with MD5/SHA-1 Hash Checksums

sd_shadow said:
did you verify the md5? 7f2e2f0b87349b1a2cd4fbcbe2f35a87
Verify that your downloads are complete with MD5/SHA-1 Hash Checksums
Click to expand...
Click to collapse
just checked and they match

and still no luck

have you seen this?
The fastest and easiest way to install TWRP is to use the GooManager app:
Play Store Link
Direct Download
1) Install GooManager from the Play Store
2) Open GooManager and provide root permissions
3) Hit Menu (or the button with the 3 dots on your screen) and then Install OpenRecovery
OR:
Click to expand...
Click to collapse
as posted here [RECOVERY] TWRP 2.6.3.0 touch recovery [2013-09-16]

sd_shadow said:
have you seen this?
as posted here [RECOVERY] TWRP 2.6.3.0 touch recovery [2013-09-16]
Click to expand...
Click to collapse
ive seen it, dont know why i havent tried that way yet, Goo is downloading now

ClassySandwiches said:
ive seen it, dont know why i havent tried that way yet, Goo is downloading now
Click to expand...
Click to collapse
after Goo auto downloads the file i need to flash? or does it do that by itself?

not sure
you installed Goo
allowed root access
and selected Install OpenRecovery?

sd_shadow said:
not sure
you installed Goo
allowed root access
and selected Install OpenRecovery?
Click to expand...
Click to collapse
yea then TWRP downloaded and i rebooted

I would think that a reboot is required, and goo should auto reboot when ready,
but if it has been several minutes, maybe a manual reboot should be done.
---------- Post added at 04:19 PM ---------- Previous post was at 04:18 PM ----------
ClassySandwiches said:
yea then TWRP downloaded and i rebooted
Click to expand...
Click to collapse
you rebooted it, goo rebooted, or goo prompted you to reboot?

sd_shadow said:
I would think that a reboot is required, and goo should auto reboot when ready,
but if it has been several minutes, maybe a manual reboot should be done.
---------- Post added at 04:19 PM ---------- Previous post was at 04:18 PM ----------
you rebooted it, goo rebooted, or goo prompted you to reboot?
Click to expand...
Click to collapse
i rebooted there was no promt after it finished downloading

try booting to twrp and see if it changed

sd_shadow said:
try booting to twrp and see if it changed
Click to expand...
Click to collapse
already did and it hasnt changed, any hurt in trying it again?

no, it shouldn't hurt anything

sd_shadow said:
no, it shouldn't hurt anything
Click to expand...
Click to collapse
this time it did give me a toast saying recovery installed, then i tapped the reboot recovery option in goo, and still reading 2.2.2.1

have you tried Kindle Fire Utility v0.9.9 to update to TWRP 2.5.0?

sd_shadow said:
have you tried Kindle Fire Utility v0.9.9 to update to TWRP 2.5.0?
Click to expand...
Click to collapse
thats what i used in the first place, not version 9.9, but shouldnt it install the latest version?

[Q] After root no rom is working.

Hello
I have a GT-P5220 (ie. Galaxy Tab 3 LTE). I have rooted the tab using this procedure: http://forum.xda-developers.com/showthread.php?t=2642796
After that everytihng seemed ok. I flashed via TWRP tihs deodexed rom: http://forum.xda-developers.com/showthread.php?t=2624466. The tab boots up but i only get lots of FC messages and can't continue to use the tab. I tryed reflashing other roms, but with the same results all the time.
Can anyone help?
Thank you!

imprz said:
Hello
I have a GT-P5220 (ie. Galaxy Tab 3 LTE). I have rooted the tab using this procedure: http://forum.xda-developers.com/showthread.php?t=2642796
After that everytihng seemed ok. I flashed via TWRP tihs deodexed rom: http://forum.xda-developers.com/showthread.php?t=2624466. The tab boots up but i only get lots of FC messages and can't continue to use the tab. I tryed reflashing other roms, but with the same results all the time.
Can anyone help?
Thank you!
Click to expand...
Click to collapse
Download your stockversion from sammobile. and flash it with Odin.
Download CWM and the root.zip flash it with odin,so your tab are rooted.
Make an nandroid backup with the recovery.
so is sure that you can go back when you have probs.

bierma32 said:
Download your stockversion from sammobile. and flash it with Odin.
Download CWM and the root.zip flash it with odin,so your tab are rooted.
Make an nandroid backup with the recovery.
so is sure that you can go back when you have probs.
Click to expand...
Click to collapse
Thank you for your quick reply. I will try this asap. I allready flashed cwm before, but i can't see the zip files I copy too root. That's why I switched to TWRP. Any ideas how to see the .zip files in cwm?

imprz said:
Thank you for your quick reply. I will try this asap. I allready flashed cwm before, but i can't see the zip files I copy too root. That's why I switched to TWRP. Any ideas how to see the .zip files in cwm?
Click to expand...
Click to collapse
root the is wrong folder.
from recovery you can only go to your int. sdcard or ext, sdcard

bierma32 said:
root the is wrong folder.
from recovery you can only go to your int. sdcard or ext, sdcard
Click to expand...
Click to collapse
Sorry my bad. I meant in internal SD, but when I try to mount it in CWM says: E: Cant mount intsd or something similar.
Any ideas?

imprz said:
Sorry my bad. I meant in internal SD, but when I try to mount it in CWM says: E: Cant mount intsd or something similar.
Any ideas?
Click to expand...
Click to collapse
Please post a picture from your recovery.
This message mine are you have stockrecovery.
edit:
which recovery you have flashed?

bierma32 said:
Please post a picture from your recovery.
This message mine are you have stockrecovery.
edit:
which recovery you have flashed?
Click to expand...
Click to collapse
OK I'm back. Just flashed the stock firmware from sammobile, as you suggested. The tab is working now? Can you tell me wich version of cwm should i flash and where do I find the root.zip for my tab?

imprz said:
OK I'm back. Just flashed the stock firmware from sammobile, as you suggested. The tab is working now? Can you tell me wich version of cwm should i flash and where do I find the root.zip for my tab?
Click to expand...
Click to collapse
I'm not sure ,you have got the lte tab.
here are the link to the CWM thread http://forum.xda-developers.com/showthread.php?t=2432467&page=13
Important uncheck autoreboot by odin. After flash boot with the button combo into recovery snd flash the root.zip
Than make an backup of your rom.

bierma32 said:
I'm not sure ,you have got the lte tab.
here are the link to the CWM thread http://forum.xda-developers.com/showthread.php?t=2432467&page=13
Important uncheck autoreboot by odin. After flash boot with the button combo into recovery snd flash the root.zip
Than make an backup of your rom.
Click to expand...
Click to collapse
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?

imprz said:
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?
Click to expand...
Click to collapse
please post a picture ,so i can see the recovery
can you load it from ext. Sdcard ?
---------- Post added at 03:04 PM ---------- Previous post was at 02:44 PM ----------
imprz said:
OK. I have flashed CWM and i can get into recovery. When i go to: choose zip from sdcard i get the following message: E: Can't mount /sdcard/
I have CWM-based recovery v6.0.2.8
Any clues on how to acces the root.zip from here?
Click to expand...
Click to collapse
please post a picture ,so i can see the recovery , looks your recovery so ?
http://www.android-hilfe.de/attachm...t-accounts-uploadfromtaptalk1380439869871.jpg

bierma32 said:
please post a picture ,so i can see the recovery
can you load it from ext. Sdcard ?
---------- Post added at 03:04 PM ---------- Previous post was at 02:44 PM ----------
please post a picture ,so i can see the recovery , looks your recovery so ?
http://www.android-hilfe.de/attachm...t-accounts-uploadfromtaptalk1380439869871.jpg
Click to expand...
Click to collapse
No. My recovery is CWM now. But it says it can't mount sdcard.
I will later try using sideload and adb. Having a look into this now: http://forum.xda-developers.com/showthread.php?t=2559200

imprz said:
No. My recovery is CWM now. But it says it can't mount sdcard.
I will later try using sideload and adb. Having a look into this now: http://forum.xda-developers.com/showthread.php?t=2559200
Click to expand...
Click to collapse
Also comes this error,when your format of the ext.sdcard than other than fat32 and the size is more than 32gb
Format a sdcard to fat32 with size less 32gb, i found some post at CWM thread.

bierma32 said:
Also comes this error,when your format of the ext.sdcard than other than fat32 and the size is more than 32gb
Format a sdcard to fat32 with size less 32gb, i found some post at CWM thread.
Click to expand...
Click to collapse
I have no external sdcard inserted in the tab. I hoped i would be able to flash the files i copied on the tab.

I kinda have the same problem, Im going to follow this thread...

I may be late for dinner but here is how I flash roms on my 5210. If the rom is the OEM Stock Rom, I flash it from ODIN. This HAS to be done this way. There is no other way to flash OEM Stock Rom.
If I am going to flash something like Grievous or Pimpdroid or BinDroid, I will load the rom on to my internal memory Download folder. Then from TWRP I select install and it goes straight to the download folder. However, before I install any of these roms I will wipe the cache and dalvik cache. Is this wise? I don't know, I just do it because most of what I have read has indicated it should be done.
So if you are still having issues, reload from fresh the OEM Stock Rom for you device. Then reload your favorite Recovery (CWM or TWRP). Set up your device for the minimal way you want to use it. Now, from either CWM or TWRP (or whatever backup app you have) backup your device and save it to your PC. This way you can always go back to standard/stock.
From here you would load the Root.zip AND the rom you want to load on the internal download folder (note - if the rom is already rooted there is no need to load root.zip). Now go into recovery and install the root. Restart then shutdown. Note - you may have to update the SuperSU or Superuser app. Go back into recovery and install the rom.
This is how I have done it and it has worked for me. I am sure I have loaded and reloaded several times different roms. However, I always come back to the Stock ROM via backup restore. I haven't found a rom worth using.
This is how I do it. Your device may not react in the same way mine does. So I advise you on the side of caution that you could damage your device if you follow what I do. Not saying what I do is wrong, but it is how I go about loading and unloading different roms. The key for me is I use the backup/restore from TWRP. I find it to be very fast.
Good luck!
ps... if you have already done this and it did not work, my apologies for coming to party too late.

Thank you for your help. I allready tried this procedure. It all works well, the problem starts with the custom roms i try to install, They install fine but when they boot up I get various forceclose messages. Unusable.
I suspect the isue is with the roms. I have not yet found a working rom for GT-P5220.
Has anyone found some working rom for this specific device?

[Q] Problem with flashing a ROM

Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.

Jestic said:
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
Are you using 5.15 version of Philz ? If so, try updating it.

dicksteele said:
Are you using 5.15 version of Philz ? If so, try updating it.
Click to expand...
Click to collapse
I'm using the 6.19.3 t0lteatt version.

Jestic said:
I'm using the 6.19.3 t0lteatt version.
Click to expand...
Click to collapse
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3

dicksteele said:
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
Click to expand...
Click to collapse
I wonder if anyone has a working zip then.

Jestic said:
I wonder if anyone has a working zip then.
Click to expand...
Click to collapse
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.

dicksteele said:
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
Click to expand...
Click to collapse
Im getting the rom from here :
http://skynote.camattin.com/)?
It downloads with no problem. The problem is when I try to install it from recovery.

Jestic said:
Im getting the rom from here :
http://skynote.camattin.com/)?
Click to expand...
Click to collapse
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used

dicksteele said:
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
Click to expand...
Click to collapse
Interesting. Thanks for the help.

Jestic said:
Interesting. Thanks for the help.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used

See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .

DoctorQMM said:
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
Click to expand...
Click to collapse
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.

Jestic said:
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Click to expand...
Click to collapse
Glad you're back up and running. .. btw, PhilZ just posted an updated CWM Touch Recovery [6.25.0] for our Note2 [t0lteatt device tree] which now automatically determines if what you're flashing has older binary code embedded in its binary-script to avoid the dreaded Status7 errors.