Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Jestic said:
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
Are you using 5.15 version of Philz ? If so, try updating it.
dicksteele said:
Are you using 5.15 version of Philz ? If so, try updating it.
Click to expand...
Click to collapse
I'm using the 6.19.3 t0lteatt version.
Jestic said:
I'm using the 6.19.3 t0lteatt version.
Click to expand...
Click to collapse
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
dicksteele said:
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
Click to expand...
Click to collapse
I wonder if anyone has a working zip then.
Jestic said:
I wonder if anyone has a working zip then.
Click to expand...
Click to collapse
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
dicksteele said:
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
Click to expand...
Click to collapse
Im getting the rom from here :
http://skynote.camattin.com/)?
It downloads with no problem. The problem is when I try to install it from recovery.
Jestic said:
Im getting the rom from here :
http://skynote.camattin.com/)?
Click to expand...
Click to collapse
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
dicksteele said:
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
Click to expand...
Click to collapse
Interesting. Thanks for the help.
Jestic said:
Interesting. Thanks for the help.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
DoctorQMM said:
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
Click to expand...
Click to collapse
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Jestic said:
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Click to expand...
Click to collapse
Glad you're back up and running. .. btw, PhilZ just posted an updated CWM Touch Recovery [6.25.0] for our Note2 [t0lteatt device tree] which now automatically determines if what you're flashing has older binary code embedded in its binary-script to avoid the dreaded Status7 errors.
Related
I keep trying to install pacman rom into my galaxy s3 on tmobile tried every rom avilable on the page and nothing works keeps failing tried smoothliquid , and carbon rom and those install great. Not sure what i'm doing wrong
You need to update your bootloader
Sent from my SGH-T999 using Tapatalk 4 Beta
Read this.
http://forum.xda-developers.com/showthread.php?t=2282603
I recommend flashing the slightly older UVDLJC package. I think some people find aosp/cm based roms seem to run better with it.
Sent from my SGH-T999 using xda premium
Thanks i'll try your advice right away. I'll post a update on how it went.
I went ahead and followed your instructions went to the link i was sent and tried all 3 files but i got a status 7 and failed the installation. I will like to aplogize ahead of time i i'm a noob just learned how to root my phone a day ago but i spent 6 hours reading forums trying to figure this out before i posted.
roxus256 said:
I went ahead and followed your instructions went to the link i was sent and tried all 3 files but i got a status 7 and failed the installation. I will like to aplogize ahead of time i i'm a noob just learned how to root my phone a day ago but i spent 6 hours reading forums trying to figure this out before i posted.
Click to expand...
Click to collapse
No problem. So what's the error message?
ok so i download this file : Flashable UVDMD5 Bootloader / Firmware / Modem update.zip
followed the instructions placed it in my sd card root folder , and went into recovery and went to install from sd and this is the status 7 message i got.
E: Error in /sdcard/t999_uvdmd5_FIRMWARE_V4.ZIP(status 7)
Installation abort
roxus256 said:
ok so i download this file : Flashable UVDMD5 Bootloader / Firmware / Modem update.zip
followed the instructions placed it in my sd card root folder , and went into recovery and went to install from sd and this is the status 7 message i got.
E: Error in /sdcard/t999_uvdmd5_FIRMWARE_V4.ZIP(status 7)
Installation abort
Click to expand...
Click to collapse
Take out the battery on your phone. There should be a model number under that. Tell me the model number.
Aerowinder said:
Take out the battery on your phone. There should be a model number under that. Tell me the model number.
Click to expand...
Click to collapse
SGH-T999
roxus256 said:
SGH-T999
Click to expand...
Click to collapse
What version of what recovery are you using?
Aerowinder said:
What version of what recovery are you using?
Click to expand...
Click to collapse
cwm-based recovery v5.5.0.4
roxus256 said:
cwm-based recovery v5.5.0.4
Click to expand...
Click to collapse
Flash the new CWM zip from my signature. You can flash it with your CWM, just reboot recovery after you're done.
Aerowinder said:
Flash the new CWM zip from my signature. You can flash it with your CWM, just reboot recovery after you're done.
Click to expand...
Click to collapse
ok thank you will do right away
Aerowinder said:
Flash the new CWM zip from my signature. You can flash it with your CWM, just reboot recovery after you're done.
Click to expand...
Click to collapse
ok got the latest one flashed
thank you so much after i installed the new recovery i just followed your previous instructions on the bootloader and retried flashing pacman , and flash successful
Hello all,
I'm also having trouble flashing Pac-Man. im running 4.3 jellybean with Knox disabled through SU.
I've got a SGH-T999L with a baseband of LUVUBMK4.
Ive tried the latest TWRP as well as the latest CWM.
Still getting an error 7 message after factory reset and SD card reformat.
Help is appreciated.
D
---------- Post added at 06:59 PM ---------- Previous post was at 06:38 PM ----------
Just tried again through TWRP.
E: Error executing updater binary in zip '/external
Error flashing zip '/external_sd/pac_d2tmo-night
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
tuktukscotty said:
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
Click to expand...
Click to collapse
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
shhbz said:
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
Click to expand...
Click to collapse
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
tuktukscotty said:
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
Click to expand...
Click to collapse
http://www.winmd5.com/ download this locate the downloaded rom file and it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom and verify to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
shhbz said:
http://www.winmd5.com/ download this locate the downloaded rom file and verify it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
Click to expand...
Click to collapse
I'm using philz touch 4.6.4
tuktukscotty said:
I'm using philz touch 4.6.4
Click to expand...
Click to collapse
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
shhbz said:
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
Click to expand...
Click to collapse
I have a UK bought note 2
tuktukscotty said:
I have a UK bought note 2
Click to expand...
Click to collapse
yes that's fine if ur box says n7100 and below battery check
shhbz said:
yes that's fine if ur box says n7100 and below battery check
Click to expand...
Click to collapse
Yes defo says GT-N7100
tuktukscotty said:
Yes defo says GT-N7100
Click to expand...
Click to collapse
you are good to proceed with the link file
shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I have installed the later philz recovery. Just going to try and flash again
tuktukscotty said:
I have installed the later philz recovery. Just going to try and flash again
Click to expand...
Click to collapse
Nope!.
Still unable to install. It says:
-- Installing: /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
(bad)
Installation aborted
press any key to continue.
What am I doing wrong????? This is really so frustrating. Have I done something when installing the leaked version of 4.3 which is now stopping anything working??. Anybody got any ideas???.
Someone out there must know what I'm doing wrong...........please help.
shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I tried and tried and tried but couldn't get it to install. I then decied to reflash back to 4.1.2 stock via odin. Then tried to install Dr's again but still wouldn't work. I then flashed the leaked 4.3 via odin and repeated the Dr's install and it worked!!!!!!.
Thanks for the advice.
Scotty.
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
dv6661 said:
hmmm, i have weird problem here, i just installed CWM 6.0.2.8 on my phone, in first using it working perceftly but then it doesn't work, please help me solve this problem, it's very annoying
or can somebody give me link the latest flashable CWM for ace 2
thanks before
thanks button awaiting
Click to expand...
Click to collapse
What problem?
Sent from my GT-I8160 using Tapatalk
teddytsen said:
What problem?
Sent from my GT-I8160 using Tapatalk
Click to expand...
Click to collapse
the problem is " CWM is not working after first flashing"
can you give me the link of latest flashable CWM for galaxy Ace 2, please
thanks before
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
qyx said:
The CWM you flashed is a temporary one.
When you restart the phone into recovery, it goes into the original Samsung recovery, right? If so, then just re-flash the CWM. You'll need to do this every time to go into CWM.
Click to expand...
Click to collapse
yeah i'm know that, but when im enter CWM not loaded, what version do you use ? give me please
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
qyx said:
I use the one from here: http://forum.xda-developers.com/showthread.php?t=2141395
(that thread says version 6.0.2.8, but when I run it it says 6.0.4.5)
I do not understand what you mean by "when im enter CWM not loaded". You need to flash the zip every time you want to run CWM, like you did the first time - somebody should correct me if I'm wrong.
Click to expand...
Click to collapse
okay i'll try it later
thanks for try to help , problem is when im get in to samsung recovery and flash temporary CWM recovery, it won't loaded, just black screen and then my phone restart.
what ROM do you use ?
when I was in stock MF1 I installed 6.0.2.8 (Shaaan thread, TY BTW) and it was temporary.
Then I flashed CM10.2 which installed me a new version of CWM (6.0.4.6) which is now persistent.
Can you develop a little bit more about your software configuration please ? ROM ? kernel ?
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
manthes said:
I have a similar problem. After i flashed cm 10.1 recovery dissapeared. I don't have cwm neither stock recovery. Any way to flash it via odin?
Click to expand...
Click to collapse
backup
flash stock via odin
flash cm10.1/gapps
try again see if recovery is there :/
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
manthes said:
i know this solution but i can't do the same thing every time i loose cwm because it worked before. Thats why i asked if it is possible to flash only cwm
Click to expand...
Click to collapse
no cwm odin flashable for us, sorry
The problem is with custom roms and my screen driver s6d.
Unfortunately only with stock rom everything is working fine
Okay, I'm stressed. This is not how I planned it, I'll try to keep it short:
Wanted to do a full clean install of this:
http://forum.xda-developers.com/showthread.php?t=2504016
So what I did:
-Used odin (bootloader) to flash mj5
-Used odin (pda) to flash twrp
-Used twrp to flash rom
-Realised I forgot to wipe, so wiped everything, then wiped media seperate (enter yes to continue) then my N2 rebooted.
Now it's stuck in a boot loop. Teamwin screen keeps flashing every 5 seconds, never going into it.
-Re-flashed twrp via odin, didn't help.
Rom doesn't boot either, bootloop at samsung logo.
**** this is so not good for my stress levels
I have no clue how I broke twrp because I even re-flashed it via odin and still bootloop
Download mode still works thank ****
Okay good news, flashed philz recovery and works! Very happy that I have some sort of recovery back. Now flashing rom, hopefully it boots.
-First boot going on. Very happy now. Sorry for opening this thread, I get REALLY stressed REALLY fast. Once the rom is done booting (which looks like it's going to happen) this thread is not useful anymore, sorry!
-Booting for a few minutes now, stess level is rising...
-Still booting... damn!
Delano.888 said:
Okay good news, flashed philz recovery and works! Very happy that I have some sort of recovery back. Now flashing rom, hopefully it boots.
-First boot going on. Very happy now. Sorry for opening this thread, I get REALLY stressed REALLY fast. Once the rom is done booting (which looks like it's going to happen) this thread is not useful anymore, sorry!
-Booting for a few minutes now, stess level is rising...
-Still booting... damn!
Click to expand...
Click to collapse
Re do the wipes via philz recovery,go under advanced wipe dalvik cache,go and wipe cache partition , then finally "wipe data/factory rest" clean to install new rom,then don't reboot your system cause it won't boot since there's no ROM on it just flash the ROM
singhpratik87 said:
Re do the wipes via philz recovery,go under advanced wipe dalvik cache,go and wipe cache partition , then finally "wipe data/factory rest" clean to install new rom,then don't reboot your system cause it won't boot since there's no ROM on it just flash the ROM
Click to expand...
Click to collapse
I did a full factory reset clean wipe, it does everything for a new rom. Then I flash rom and boot, but booting takes really long. Tried twice, still busy booting second time now 13 minutes...
Didn't do caches last time, I'll try again.
Delano.888 said:
I did a full factory reset clean wipe, it does everything for a new rom. Then I flash rom and boot, but booting takes really long. Tried twice, still busy booting second time now 13 minutes...
Didn't do caches last time, I'll try again.
Click to expand...
Click to collapse
Which philz version are you using?6.25/6.26 is recommended and this other user in DN3 thread couldnt get the rom to boot either by trying latest versions of recovery he used an older version of twrp which is 2.6.3.1/2 and it booted for him.Sometimes recoveries act up for no reason
singhpratik87 said:
Which philz version are you using?6.25/6.26 is recommended and this other user in DN3 thread couldnt get the rom to boot either by trying latest versions of recovery he used an older version of twrp which is 2.6.3.1/2 and it booted for him.Sometimes recoveries act up for no reason
Click to expand...
Click to collapse
philz 5.00, didn't find any newer? that's the problem?
Is this not the latest?:
http://forum.xda-developers.com/showthread.php?t=2028103
Delano.888 said:
philz 5.00, didn't find any newer? that's the problem?
Is this not the latest?:
http://forum.xda-developers.com/showthread.php?t=2028103
Click to expand...
Click to collapse
That's the MAIN culprit my friend i'll link you up with the latest philz
Philz
Download the .tar file put the phone into download mode and flash this recovery via odin using the pda tab
singhpratik87 said:
That's the MAIN culprit my friend i'll link you up with the latest philz
Philz
Download the .tar file put the phone into download mode and flash this recovery via odin using the pda tab
Click to expand...
Click to collapse
Thanks. Got new philz and now installing rom third time.
However I didn't see this anywhere?
8) Now go to choose to install the rom zip file. If you using Philz recovery, make sure to untick "Don't Allow Old update-binary" if this option is avalaible.
Not important? Because didn't see it..
Delano.888 said:
Thanks. Got new philz and now installing rom third time.
However I didn't see this anywhere?
8) Now go to choose to install the rom zip file. If you using Philz recovery, make sure to untick "Don't Allow Old update-binary" if this option is avalaible.
Not important? Because didn't see it..
Click to expand...
Click to collapse
You wont see that line on 6.2.5/6.26 it was only seen on 6.19.2
singhpratik87 said:
You wont see that line on 6.2.5/6.26 it was only seen on 6.19.2
Click to expand...
Click to collapse
Okay thanks. Rom seems to be booting again. Really hope it works now!
edit: still booting, seems to not work again
Delano.888 said:
Okay thanks. Rom seems to be booting again. Really hope it works now!
edit: still booting, seems to not work again
Click to expand...
Click to collapse
Try with twrp 2.6.3.2 ,i know this is annoying that one needs to juggle between recoveries to get a rom to work
Shouldn't take more than 10 minutes for ROM to boot
singhpratik87 said:
Try with twrp 2.6.3.2 ,i know this is annoying that one needs to juggle between recoveries to get a rom to work
Shouldn't take more than 10 minutes for ROM to boot
Click to expand...
Click to collapse
Not 2.7.0.2?
Delano.888 said:
Not 2.7.0.2?
Click to expand...
Click to collapse
You can try like i said it's just trial and error which recovery works,so 2.7.0.2 and then if not work try with 2.6.3.1/2
singhpratik87 said:
You can try like i said it's just trial and error which recovery works,so 2.7.0.2 and then if not work try with 2.6.3.1/2
Click to expand...
Click to collapse
I have NO CLUE what just happened.
I flashed twrp, and it rebooted. Recovery didn't boot, but phone booted right away! Rom is now on. Guess it's okay now.
Thanks for the help!
Delano.888 said:
I have NO CLUE what just happened.
I flashed twrp, and it rebooted. Recovery didn't boot, but phone booted right away! Rom is now on. Guess it's okay now.
Thanks for the help!
Click to expand...
Click to collapse
LOL ,told you ,recoveries can be very annoying at times.Now enjoy the ROM.If you face any issues use the search button in the DN3 thread or read the FAQ in the first page i think it's the 4th post there.Good luck
singhpratik87 said:
LOL ,told you ,recoveries can be very annoying at times.Now enjoy the ROM.If you face any issues use the search button in the DN3 thread or read the FAQ in the first page i think it's the 4th post there.Good luck
Click to expand...
Click to collapse
Very strange how that happened but everything is good now. Thank you very much!
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Irwenzhao said:
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
I don't think it was the fault of odin because I got it working later but the rom has many problems so I guess the rom is just broken. No time today but I'll change my rom soon.
Irwenzhao said:
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
Gr8 advice, hope that not too many read this and trust in it. :fingers-crossed:
Delano.888 said:
I don't think it was the fault of odin because I got it working later but the rom has many problems so I guess the rom is just broken. No time today but I'll change my rom soon.
Click to expand...
Click to collapse
Androidwizzard said:
Gr8 advice, hope that not too many read this and trust in it. :fingers-crossed:
Click to expand...
Click to collapse
ODIN is pure unreliable for me. I'm still using a version of TWRP I got last year and it's still more reliable than cwm or any other recovery.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!
MitoTakatori said:
Hi all! I can't seem to find a flashable CWM 6.0.4.7 recovery for our G PRO(E98x/F240x).
If anyone can give me a link or the file itself, I would be very thankful!
Thanks in advance!
Click to expand...
Click to collapse
here you go
hyperionx7 said:
here you go
Click to expand...
Click to collapse
Wow that is fast! Thanks mate. I'll try this one. Kudos!
hyperionx7 said:
here you go
Click to expand...
Click to collapse
Loki check problem when I flashed it. Any lokified recovery? Thanks!
MitoTakatori said:
Loki check problem when I flashed it. Any lokified recovery? Thanks!
Click to expand...
Click to collapse
well i took that file from freegee folder, maybe you must flash this file first
Download CWM OR TWRP without any hassle
Just download freegee(root) from Google play store and once installed and opened ....let it download the necessary....then just click on cwm or twrp as per ur wish ......u might then feel as if the app has frozen....but it is the process of downloading...... And once finished it will show flash successful ....
Works with 4.4.2?
I used the FreeGee app on stock 4.4.2 V20c earlier, but it bricked my device. Why is that? How do I install a recovery on 4.4.2?
i have a question on flashing the cwm recovery image, i had to go back to stock as i was soft bricked - i now need to install a recovery and i am sure that when i did this a few weeks ago on my g pro i used flashify and flashed the cwm recovery image through this app and everything works ed well, now i am trying to do it and it flashes the file but wont go into recovery - it says fastboot mode started but never goes into recovery, i also tried rom toolbox to flash it and not having any luck - anyone have a way to do this ?
hyperionx7 said:
here you go
Click to expand...
Click to collapse
Not work on LG F240L? Help
I want to flash rom [ROM][UNOFFICIAL][CM12][5.0.2][2/1/15] LiquidSmooth v4.0 on http://forum.xda-developers.com/opt...liquidsmooth-v4-0-t3013270/page3#post58726587
or rom Mokee http://download.mokeedev.com/?device=e980
Help me!
Thank's
I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?
chrisdotjan said:
I would like to install a CWM touch variant, is there a way to get it done with KK stock rom?
I know it needs to be "lokified", but I have no clue how to do this.
Is there any tutorial to do this?
Click to expand...
Click to collapse
Philz touch cwm is a good one, you can find here on xda, or via Google search. However, my personal experience with cwm touch variant on e980 is that it causes the recovery bootloop (where you just keeps on going back to the recovery screen). Version 6.0.47 is stable , and will not cause the boot loop say when you try to open the recovery by using the up volume + power buttons. This seem to be the issue too with the cwm provided by cm update in the developer's option. Read the postings in the Philz's thread if you want to know more about the recovery loop and the touch cwm.
I get wrong date and time whene i make a backup. I have a E986. How can i fix this?