Okay, I'm stressed. This is not how I planned it, I'll try to keep it short:
Wanted to do a full clean install of this:
http://forum.xda-developers.com/showthread.php?t=2504016
So what I did:
-Used odin (bootloader) to flash mj5
-Used odin (pda) to flash twrp
-Used twrp to flash rom
-Realised I forgot to wipe, so wiped everything, then wiped media seperate (enter yes to continue) then my N2 rebooted.
Now it's stuck in a boot loop. Teamwin screen keeps flashing every 5 seconds, never going into it.
-Re-flashed twrp via odin, didn't help.
Rom doesn't boot either, bootloop at samsung logo.
**** this is so not good for my stress levels
I have no clue how I broke twrp because I even re-flashed it via odin and still bootloop
Download mode still works thank ****
Okay good news, flashed philz recovery and works! Very happy that I have some sort of recovery back. Now flashing rom, hopefully it boots.
-First boot going on. Very happy now. Sorry for opening this thread, I get REALLY stressed REALLY fast. Once the rom is done booting (which looks like it's going to happen) this thread is not useful anymore, sorry!
-Booting for a few minutes now, stess level is rising...
-Still booting... damn!
Delano.888 said:
Okay good news, flashed philz recovery and works! Very happy that I have some sort of recovery back. Now flashing rom, hopefully it boots.
-First boot going on. Very happy now. Sorry for opening this thread, I get REALLY stressed REALLY fast. Once the rom is done booting (which looks like it's going to happen) this thread is not useful anymore, sorry!
-Booting for a few minutes now, stess level is rising...
-Still booting... damn!
Click to expand...
Click to collapse
Re do the wipes via philz recovery,go under advanced wipe dalvik cache,go and wipe cache partition , then finally "wipe data/factory rest" clean to install new rom,then don't reboot your system cause it won't boot since there's no ROM on it just flash the ROM
singhpratik87 said:
Re do the wipes via philz recovery,go under advanced wipe dalvik cache,go and wipe cache partition , then finally "wipe data/factory rest" clean to install new rom,then don't reboot your system cause it won't boot since there's no ROM on it just flash the ROM
Click to expand...
Click to collapse
I did a full factory reset clean wipe, it does everything for a new rom. Then I flash rom and boot, but booting takes really long. Tried twice, still busy booting second time now 13 minutes...
Didn't do caches last time, I'll try again.
Delano.888 said:
I did a full factory reset clean wipe, it does everything for a new rom. Then I flash rom and boot, but booting takes really long. Tried twice, still busy booting second time now 13 minutes...
Didn't do caches last time, I'll try again.
Click to expand...
Click to collapse
Which philz version are you using?6.25/6.26 is recommended and this other user in DN3 thread couldnt get the rom to boot either by trying latest versions of recovery he used an older version of twrp which is 2.6.3.1/2 and it booted for him.Sometimes recoveries act up for no reason
singhpratik87 said:
Which philz version are you using?6.25/6.26 is recommended and this other user in DN3 thread couldnt get the rom to boot either by trying latest versions of recovery he used an older version of twrp which is 2.6.3.1/2 and it booted for him.Sometimes recoveries act up for no reason
Click to expand...
Click to collapse
philz 5.00, didn't find any newer? that's the problem?
Is this not the latest?:
http://forum.xda-developers.com/showthread.php?t=2028103
Delano.888 said:
philz 5.00, didn't find any newer? that's the problem?
Is this not the latest?:
http://forum.xda-developers.com/showthread.php?t=2028103
Click to expand...
Click to collapse
That's the MAIN culprit my friend i'll link you up with the latest philz
Philz
Download the .tar file put the phone into download mode and flash this recovery via odin using the pda tab
singhpratik87 said:
That's the MAIN culprit my friend i'll link you up with the latest philz
Philz
Download the .tar file put the phone into download mode and flash this recovery via odin using the pda tab
Click to expand...
Click to collapse
Thanks. Got new philz and now installing rom third time.
However I didn't see this anywhere?
8) Now go to choose to install the rom zip file. If you using Philz recovery, make sure to untick "Don't Allow Old update-binary" if this option is avalaible.
Not important? Because didn't see it..
Delano.888 said:
Thanks. Got new philz and now installing rom third time.
However I didn't see this anywhere?
8) Now go to choose to install the rom zip file. If you using Philz recovery, make sure to untick "Don't Allow Old update-binary" if this option is avalaible.
Not important? Because didn't see it..
Click to expand...
Click to collapse
You wont see that line on 6.2.5/6.26 it was only seen on 6.19.2
singhpratik87 said:
You wont see that line on 6.2.5/6.26 it was only seen on 6.19.2
Click to expand...
Click to collapse
Okay thanks. Rom seems to be booting again. Really hope it works now!
edit: still booting, seems to not work again
Delano.888 said:
Okay thanks. Rom seems to be booting again. Really hope it works now!
edit: still booting, seems to not work again
Click to expand...
Click to collapse
Try with twrp 2.6.3.2 ,i know this is annoying that one needs to juggle between recoveries to get a rom to work
Shouldn't take more than 10 minutes for ROM to boot
singhpratik87 said:
Try with twrp 2.6.3.2 ,i know this is annoying that one needs to juggle between recoveries to get a rom to work
Shouldn't take more than 10 minutes for ROM to boot
Click to expand...
Click to collapse
Not 2.7.0.2?
Delano.888 said:
Not 2.7.0.2?
Click to expand...
Click to collapse
You can try like i said it's just trial and error which recovery works,so 2.7.0.2 and then if not work try with 2.6.3.1/2
singhpratik87 said:
You can try like i said it's just trial and error which recovery works,so 2.7.0.2 and then if not work try with 2.6.3.1/2
Click to expand...
Click to collapse
I have NO CLUE what just happened.
I flashed twrp, and it rebooted. Recovery didn't boot, but phone booted right away! Rom is now on. Guess it's okay now.
Thanks for the help!
Delano.888 said:
I have NO CLUE what just happened.
I flashed twrp, and it rebooted. Recovery didn't boot, but phone booted right away! Rom is now on. Guess it's okay now.
Thanks for the help!
Click to expand...
Click to collapse
LOL ,told you ,recoveries can be very annoying at times.Now enjoy the ROM.If you face any issues use the search button in the DN3 thread or read the FAQ in the first page i think it's the 4th post there.Good luck
singhpratik87 said:
LOL ,told you ,recoveries can be very annoying at times.Now enjoy the ROM.If you face any issues use the search button in the DN3 thread or read the FAQ in the first page i think it's the 4th post there.Good luck
Click to expand...
Click to collapse
Very strange how that happened but everything is good now. Thank you very much!
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Irwenzhao said:
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
I don't think it was the fault of odin because I got it working later but the rom has many problems so I guess the rom is just broken. No time today but I'll change my rom soon.
Irwenzhao said:
@Delano.888 this is why I NEVER use ODIN, it Just screws your phone up. TWRP FTW for me.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Click to expand...
Click to collapse
Gr8 advice, hope that not too many read this and trust in it. :fingers-crossed:
Delano.888 said:
I don't think it was the fault of odin because I got it working later but the rom has many problems so I guess the rom is just broken. No time today but I'll change my rom soon.
Click to expand...
Click to collapse
Androidwizzard said:
Gr8 advice, hope that not too many read this and trust in it. :fingers-crossed:
Click to expand...
Click to collapse
ODIN is pure unreliable for me. I'm still using a version of TWRP I got last year and it's still more reliable than cwm or any other recovery.
N7105 rocking AOSB with AGNi kernel,
Sent from a small country named Singapore.
Click "Thanks" if I was of any help!
Related
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Jestic said:
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
Are you using 5.15 version of Philz ? If so, try updating it.
dicksteele said:
Are you using 5.15 version of Philz ? If so, try updating it.
Click to expand...
Click to collapse
I'm using the 6.19.3 t0lteatt version.
Jestic said:
I'm using the 6.19.3 t0lteatt version.
Click to expand...
Click to collapse
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
dicksteele said:
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
Click to expand...
Click to collapse
I wonder if anyone has a working zip then.
Jestic said:
I wonder if anyone has a working zip then.
Click to expand...
Click to collapse
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
dicksteele said:
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
Click to expand...
Click to collapse
Im getting the rom from here :
http://skynote.camattin.com/)?
It downloads with no problem. The problem is when I try to install it from recovery.
Jestic said:
Im getting the rom from here :
http://skynote.camattin.com/)?
Click to expand...
Click to collapse
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
dicksteele said:
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
Click to expand...
Click to collapse
Interesting. Thanks for the help.
Jestic said:
Interesting. Thanks for the help.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
DoctorQMM said:
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
Click to expand...
Click to collapse
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Jestic said:
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Click to expand...
Click to collapse
Glad you're back up and running. .. btw, PhilZ just posted an updated CWM Touch Recovery [6.25.0] for our Note2 [t0lteatt device tree] which now automatically determines if what you're flashing has older binary code embedded in its binary-script to avoid the dreaded Status7 errors.
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
d0vada said:
Hello members,i have a problem . I bought a samsung galaxy tab 3 7.0 wifi (SM-T210) last week and i have rooted it + installed cwm and after i flash anything(custom lock screen or custom rom) the tablet gets soft bricked and the rom dont boot anymore,it enters automaticaly in cwm. So how can i fix it?
Click to expand...
Click to collapse
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
bierma32 said:
Which recovery Version you are flashed on your tab?
And which root.zip you are used?
Flash Stockrom and try it again.
Click to expand...
Click to collapse
Im using the latest TWRP recovery 2.7.0.0 and for root i use a zip called universal root armeabi *smth like that*
I allready flashed the stockrom 3 times and i got the same result. also im using the T210XXANC2 firmware.
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
paranoidmarvin42 said:
In CWM, wipe data and factory reset. Then go to Download mode, use Odin and flash your stock rom. That should do it.
Click to expand...
Click to collapse
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
d0vada said:
i have rooted stock rom running with latest twrp but if i flash a custom rom it wont boot anymore, it gets softbricked but i dont know why.
Click to expand...
Click to collapse
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
paranoidmarvin42 said:
What ROM are you trying to flash? You must have missed a step. Make sure you read the instructions carefully before doing anything and use a custom rom for your device. Try again. I'm also new to Android and has softbricked my tab a couple of times now.
Go back to stock. Let your device boot completely. Install recovery again. Reboot again.
To make it easier, how about watching a video so you can see how it's done properly? It helped me a lot. http://forum.xda-developers.com/showthread.php?t=2459817
Good luck.
Click to expand...
Click to collapse
I want to flash seal rom. also, thanks for the links, i will check them later.
d0vada said:
I want to flash seal rom. also, thanks for the links, i will check them later.
Click to expand...
Click to collapse
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
bierma32 said:
Plesse,dont use TWRP , i prefere CWM or PhilzTouch,why : alot of user are have postet probs when they used TWRP.
Also i prefere after rooting The Blackhawk Kernel.
Click to expand...
Click to collapse
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
d0vada said:
So i have flashed (again) the stock firmware from sammobile,i rooted it,installed cwm 6.0.4.7 and then i flashed SEAL rom v4 and its not working. Its like something that doesnt let custom rom boot on my tab. Sad part is that i cant provide a logcat because the android wont boot.
EDIT: Do i have to unlock the bootloader?
Click to expand...
Click to collapse
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
bierma32 said:
Last Try,
Have you flashed The Blackhawk Kernel?
If not , Boot Into recovery, make a full wipe, flash seal ,Blackhawk Kernel ,full wipe again and reboot.
If this all not help ,post your prob at The Rom Thread.
Click to expand...
Click to collapse
I allready tried 3 roms(seal, 4.2.2 beta 2 and inspire) and all goes to the same result. Also, after installing the cwm i flash first the blackhawk kernel and android boots normally (stock rom with custom kernel) but custom rom with or without custom kernel wont boot.
I had similar problem try flashing seal v3.
So, I've never flashed or deeply modified an Android device before. I'm a professional programmer, BTW - and I just finished my first Android app for a customer, so I don't shy away from such things.
I have a Tab 3 7.0 Lite SM-T110 that my son went ahead and flashed...or something...but he hasn't been able to restore it to working condition. I tried today; I can't either.
He had installed CWM 6.0.4.8 and it boots into that when firing it up. I cleared the Dalvik cache, "wipe cache partition", and "wipe data/factory reset"...then tried installing the "full" and "lite" versions from here:
http://forum.xda-developers.com/showthread.php?t=2780068
Both say they installed successfully but upon reboot, nothing changes. I see the Samsung boot logo screen and it goes right back to CWM.
Is there any hope in recovering this back to 4.2.2? I really need a Jellybean device to test on.
Thanks!
kilonova said:
So, I've never flashed or deeply modified an Android device before. I'm a professional programmer, BTW - and I just finished my first Android app for a customer, so I don't shy away from such things.
I have a Tab 3 7.0 Lite SM-T110 that my son went ahead and flashed...or something...but he hasn't been able to restore it to working condition. I tried today; I can't either.
He had installed CWM 6.0.4.8 and it boots into that when firing it up. I cleared the Dalvik cache, "wipe cache partition", and "wipe data/factory reset"...then tried installing the "full" and "lite" versions from here:
http://forum.xda-developers.com/showthread.php?t=2780068
Both say they installed successfully but upon reboot, nothing changes. I see the Samsung boot logo screen and it goes right back to CWM.
Is there any hope in recovering this back to 4.2.2? I really need a Jellybean device to test on.
Thanks!
Click to expand...
Click to collapse
You need to restore the stock recovery. Go to sammobile.com firmware section and download the entire firmware for your device and flash it using Odin.
Edit: Here's a link to the U.S. version. http://www.sammobile.com/firmwares/download/39024/T110UEUANK2_T110XARANK2_XAR.zip/
gr8nole said:
You need to restore the stock recovery. Go to sammobile.com firmware section and download the entire firmware for your device and flash it using Odin.
Edit: Here's a link to the U.S. version.
Click to expand...
Click to collapse
Cool, thanks. I had downloaded the "Unknown" version since I didn't see one for US. Will give it a shot. Appreciate it.
kilonova said:
Cool, thanks. I had downloaded the "Unknown" version since I didn't see one for US. Will give it a shot. Appreciate it.
Click to expand...
Click to collapse
If you want to just flash the stock recovery only, this post has it.
Thanks again. I'll have to take a look this weekend. I'm at work and use OS X there, so Odin will have to wait. I download the Java alternative "JOdin" but it doesn't seem to want to connect to my device. Meh.
kilonova said:
Thanks again. I'll have to take a look this weekend. I'm at work and use OS X there, so Odin will have to wait. I download the Java alternative "JOdin" but it doesn't seem to want to connect to my device. Meh.
Click to expand...
Click to collapse
Flash this zip in CWM. Then select the "Reboot Recovery" option. It should boot into the stock recovery. Then try to reboot into the system.
gr8nole said:
Flash this zip in CWM. Then select the "Reboot Recovery" option. It should boot into the stock recovery. Then try to reboot into the system.
Click to expand...
Click to collapse
That worked! Back in bidness now...thanks very much. Will hang onto that file for future fubars on this tablet.
Not my work but it works now.
How to
Reboot in recovery
Wipe device
Flash Rom and kernel:
Download for rom:
Flash this after:
Reboot
Recommend using twrp 3.0.0.1
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
FingerBlastJ said:
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
Click to expand...
Click to collapse
Kernel fixes hardware issues
and if I'm on note 5 moar rom with patch.... no issue flashing right?
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Blzfrost said:
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Click to expand...
Click to collapse
Just flash Rom and kernel everything will work.
MonkeyAround said:
Just flash Rom and kernel everything will work.
Click to expand...
Click to collapse
Oh I'm setting everything up right now for the flash! I'm so excited. Once I realized you linked to a note 5 Rom most of my questions got answered. My favorite part, the kernel was posted on my bday.
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
FingerBlastJ said:
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
Click to expand...
Click to collapse
Update your TWRP.
https://dl.twrp.me/zenltespr/
yea I tried doing that with Odin and it would freeze mid way. I also tried flashing a twrp update zip file on twrp and that didn't work either.
you think I should flash with flash fire?
bricked my phone by trying to flash newer version of twrp with twrp manager
been trying to flash unbrick tar and pit file to get back up and running but its not working.
any help is much appreciated
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
FingerBlastJ said:
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
Click to expand...
Click to collapse
Have you checked for root with root checker? I have lost root access a few times in the past?
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
FingerBlastJ said:
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
Click to expand...
Click to collapse
Last thing I can think of is when opening TWRP the first time. It asks if you want to make the system 'read only'. Did you select No?
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
FingerBlastJ said:
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
Click to expand...
Click to collapse
Not sure. You can click mount and see what is mounted. I am not sure that will work. I am not sure exactly what you are trying to wipe, but mount the items you are attempting to wipe and make sure the read-only is unchecked.
Try this:
Check to see if oem is checked
Re-root via root tar/odin
twrp 3.0.0.1 from edge files post in general
Backup stock
Wipe
Flash Moar
Don't reboot
Flash skyhigh kernel
Flash xposed(don't have to)
Reboot
Allow it to boot loop a couple time (from sky kernel)
Give 5-10 minutes to boot
I just did it with no issues and I've personally had more luck with 3.0.0.1 than any of the others.
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
FingerBlastJ said:
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
Click to expand...
Click to collapse
Your on Lp bootloader that's your issue.
Download Marshmallow tar from the general post I made for rooting Bpg1.
Flash tar and follow post.
twrp. 3.0.x.x is more for marshmallow. You need to be on 6.0.1 not 5.1.1.
Don't use fireflash on this device.
Fireflash is more for phones with locked bootloaders like Verizon s4 on the of1 update.
Fireflash isn't really up to date with our phone and could easily brick your device.
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Thanks for the reply.
Are you sure what happened to is exactly what happened to you? Because I tried the ToolKit and it is not working. I tried both the versions of the TWRP and Stock recovery.
If you know anything else about this issue that would help me. I'd love to hear it.
SillyPython said:
Same happened to me also. But somehow I fixed it by installing TWRP again by using OnrPlus 3 toolkit. Here is the toolkit forum.xda-developers.com/oneplus-3/development/tool-tool-one-driversunlocktwrpfactory-t3398993. Can't post links. Don't forget to put http:// front of it
Click to expand...
Click to collapse
Also. Does encryption affect this in anyway, because I did it. I don't want to factory reset my phone because this is my primary phone and I don't have another phone. And I don't want to risk it, at least for a few days.
malachiseelam said:
Hello there,
This is my first XDA thread! This is an issue I ran into.
I just installed CM 14.1 on my OP3. I downloaded the latest TWRP from the official website before flashing it.
Here is the problem. After setting up my ROM, like installing all the required apps, I'm not able to boot into recovery. I tried flashing TWRP again, I downloaded the oneplus recovery from your website and I flashed that one too.
I erased recovery partition and installed both of them again (erasing each time). What happens is, after booting into the bootloader, I select recovery to go to the recovery and it stays blank, unless I reset it by holding the buttons.
Please let me know what I can do.
Click to expand...
Click to collapse
Modified TWRP version should do it
Same, when I flashed cm 14.1 I also got blank TWRP.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Then, what did you do?
LS.xD said:
Modified TWRP version should do it
Click to expand...
Click to collapse
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
michielokt said:
Same, when I flashed cm 14.1 I also got blank TWRP.
Click to expand...
Click to collapse
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
malachiseelam said:
Thanks LS.xD. You are awesome. I completely messed up my old Moto X and I didn't have a smartphone until now. I hesitated a lot before installing all custom stuff until I gave in. And this problem made me worry a lot.
Thanks a lot.
Michielokt, you should try flash the recovery LS.xD gave the link to, it booted.
Click to expand...
Click to collapse
Thanks it worked!
Please try the modified TWRP, 3.0.2-22