Is there any way to flash custom recovery to Tab3 Lite?
And root it then.
T210 recovery does not work correctly and I can't find the one specific to Lite version.
bmaggot said:
Is there any way to flash custom recovery to Tab3 Lite?
And root it then.
T210 recovery does not work correctly and I can't find the one specific to Lite version.
Click to expand...
Click to collapse
When you say the T210 version doesn't work correctly, what exactly does not work?
Sent from my SCH-I605
gr8nole said:
When you say the T210 version doesn't work correctly, what exactly does not work?
Click to expand...
Click to collapse
I get incorrectly centered letters "T210" and there's exclamation sign in yellow triangle when trying to enter download mode or recovery after installing TWRP recovery.tar.md5 for T210 with ODIN.
Android boots, but I can't enter download mode.
Had to do a reinitialization with KIES.
Nothing actually.
I'll probably port cwm myself if I manage to bet through all these compilation errors I'm getting...
Sent from my Nexus 4 using xda app-developers app
No root for t110?
Still I'm not able to port CWM.
Maybe someone more knowledgeable will do that.
bmaggot said:
Still I'm not able to port CWM.
Maybe someone more knowledgeable will do that.
Click to expand...
Click to collapse
But you have root?
wesvista said:
But you have root?
Click to expand...
Click to collapse
No. Can't root without recovery.
bmaggot said:
No. Can't root without recovery.
Click to expand...
Click to collapse
Oke thanks was hoping you had a adb exploit from somewhere xD
Post the stock recovery.img here and I will take a look and may be able to get a CWM recovery for you. No promises.
Alright, thanks.
Attached recovery.
bmaggot said:
Alright, thanks.
Attached recovery.
Click to expand...
Click to collapse
Attached is an attempt at CWM 6.0.4.5 for T110 ported from the T210 version.
I compiled the T110 kernel from sources with a few modifications that I hope will make this work correctly.
I have not tested this recovery since I don't have a T110.
Make sure you have the stock T110 recovery that you can reflash in Odin if this doesn't boot (posted above).
Unzip the attached file and use Odin to flash the "recovery.tar.md5" file. Remember to uncheck auto reboot in Odin and boot directly to recovery when you get the "RES OK" message in Odin.
Please report back.
See my other recovery threads in the development section for how to use Odin to flash a recovery.
Flash at your own risk.
EDIT: Didn't work correctly. Attachment removed (will try again tomorrow).
gr8nole said:
Attached is an attempt at CWM 6.0.4.5 for T110 ported from the T210 version.
I compiled the T110 kernel from sources with a few modifications that I hope will make this work correctly.
I have not tested this recovery since I don't have a T110.
Make sure you have the stock T110 recovery that you can reflash in Odin if this doesn't boot (posted above).
Unzip the attached file and use Odin to flash the "recovery.tar.md5" file. Remember to uncheck auto reboot in Odin and boot directly to recovery when you get the "RES OK" message in Odin.
Please report back.
See my other recovery threads in the development section for how to use Odin to flash a recovery.
Flash at your own risk.
Click to expand...
Click to collapse
Oke it's not working for me.
Screen goes black when reboot to recovery without device reboot
If i reboot and then go to recovery i get 3e recovery again.
Could you help me?
Sent from my SM-T110 using XDA Premium 4 mobile app
Try again. When recovery doesn't boot correctly, reboot into the OS and send me the /proc/last_kmsg and /cache/recovery/last_log.
Sent from my SCH-I605
gr8nole said:
Try again. When recovery doesn't boot correctly, reboot into the OS and send me the /proc/last_kmsg and /cache/recovery/last_log.
Sent from my SCH-I605
Click to expand...
Click to collapse
last_kmsg
last_log gives me does no exist
wesvista said:
last_kmsg
last_log gives me does no exist
Click to expand...
Click to collapse
Did you flash the CWM recovery again before sending this last_kmsg?
gr8nole said:
Did you flash the CWM recovery again before sending this last_kmsg?
Click to expand...
Click to collapse
I get does not exist on both now ??
Pulling full /proc/ xD hope that works
Maybe this kmsg shows some info
wesvista said:
I get does not exist on both now ??
Pulling full /proc/ xD hope that works
Maybe this kmsg shows some info
Click to expand...
Click to collapse
Ok, I'll try again tomorrow when I get back to my build box.
gr8nole said:
Ok, I'll try again tomorrow when I get back to my build box.
Click to expand...
Click to collapse
Thanks
Related
I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Did you install custom recovery?
Sent from my SGH-T889 using xda premium
Rhiannon224 said:
Did you install custom recovery?
Sent from m. y SGH-T889 using xda premium
Click to expand...
Click to collapse
Yes I did. TWRP & CWM. It seems to not be allowing access to write the boot.img?
drunkboi said:
I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Click to expand...
Click to collapse
Check download sum. If you use TWRP check if you un latest version.
drunkboi said:
I'm unable to flash any custom Rom after rooting my device. It keeps getting stuck at the boot screen. I've followed all the directions as instructed. I did notice when trying to install a Rom it was not able to access the boot.img or unable to write it? Any help on this would be appreciated.
Click to expand...
Click to collapse
what tutorial did you use?
i followed this guide and everything works perfectly
http://forum.xda-developers.com/showthread.php?t=1955423
Download the files needed, flash the .tar (cwm) with odin, go into cwm and flash superuser...done.
also are you pushing the files or using cwm to flash the rom zip?
jdiddy_ub said:
what tutorial did you use?
i followed this guide and everything works perfectly
http://forum.xda-developers.com/showthread.php?t=1955423
Download the files needed, flash the .tar (cwm) with odin, go into cwm and flash superuser...done.
also are you pushing the files or using cwm to flash the rom zip?
Click to expand...
Click to collapse
I followed the guide above. Do I need to have an SD card? I don't have one since I came from a Samsung Galaxy Nexus. I was flashing the Rom.zip through TWRP and CWM.
drunkboi said:
I followed the guide above. Do I need to have an SD card? I don't have one since I came from a Samsung Galaxy Nexus. I was flashing the Rom.zip through TWRP and CWM.
Click to expand...
Click to collapse
If your already rooted id maybe download goomanager and flash twrp through that, I initially rooted with the toolkit and had a hell of a time with flashing after I rooted, but once I did that I was good to go, just make sure you follow directions to the letter.
Sent from my SGH-T889 using xda premium
you dont have to put your roms on an sd card but i did...i always keep my roms on my sd if my phone has an sd slot
its odd that the flash isnt taking...the boot.img is the kernel....did you check the md5 sum?
I'm so frustrated! I've done everything as posted to root and flash a Rom on my device. I've verified I have root access. I've never had these issues! After rooting my device and flashing any Rom like Jedi it won't load past the start up screen.
drunkboi said:
I'm so frustrated! I've done everything as posted to root and flash a Rom on my device. I've verified I have root access. I've never had these issues! After rooting my device and flashing any Rom like Jedi it won't load past the start up screen.
Click to expand...
Click to collapse
are you flash by TWRP ?
Edit : Try flash rom with PC Odin or reflash CWM with PC Odin then try rom again with CWM
simplelife said:
are you flash by TWRP ?
Click to expand...
Click to collapse
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
drunkboi said:
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
Click to expand...
Click to collapse
Jedi Rom had custom kennel but i dont think that is issue(you can try another rom to see its go though). Like im said before try flash rom with PC Odin or Mobile Odin ( now support our note) or try reflash CWM then try flash rom again.
drunkboi said:
Yes, and CWM. It dosn't seem to be an issue with Recovery. It seems to be having issues flashing the Kernel during installation. It seems to not be allowing access to write it. I have no idea why this would be? The device is properly rooted & have verified root access.
Click to expand...
Click to collapse
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
maybe you should return your phone to stock and start the process over?
xcrazydx said:
Why do you think it is having an issue with the kernel? Did you try a cache wipe or factory reset after it loops?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Because when trying to flash the BLACKSTAR Rom it said unable to access or write boot.img, somthing like that. I've tried both. It still doesn't go past the galaxy note start up screen.
jdiddy_ub said:
maybe you should return your phone to stock and start the process over?
Click to expand...
Click to collapse
Yes, I've done that several times.
simplelife said:
Jedi Rom had custom kennel but i dont think that is issue(you can try another rom to see its go though). Like im said before try flash rom with PC Odin or Mobile Odin ( now support our note) or try reflash CWM then try flash rom again.
Click to expand...
Click to collapse
How do you install custom Roms like Jedi using Odin?
Try flashing the ROM again in cwm..if it gets stuck at the boot screen..extract the boot.img and push the boot.IMG separately after
Sent from my SGH-T889 using Tapatalk 2
drunkboi said:
Because when trying to flash the BLACKSTAR Rom it said unable to access or write boot.img, somthing like that. I've tried both. It still doesn't go past the galaxy note start up screen.
Click to expand...
Click to collapse
Black star? ? Isnt that i717 note 1 ROM bro?
from my Galaxy Note 2!!!
》Jedi Roms 《
---------- Post added at 05:05 PM ---------- Previous post was at 05:04 PM ----------
drunkboi said:
How do you install custom Roms like Jedi using Odin?
Click to expand...
Click to collapse
Which recovery do you have right now... I use twrp and flash constantly with tests and updates...
from my Galaxy Note 2!!!
》Jedi Roms 《
I'm trying to flash philz recovery and hurtsky kernel, both ended up unsuccessful, any help? Thanks in advanced~
quanlim said:
I'm trying to flash philz recovery and hurtsky kernel, both ended up unsuccessful, any help? Thanks in advanced~
Click to expand...
Click to collapse
Which CWM version are you using at the moment? Which Romis actually installed? Could you post a link for "philz"?
LS.xD said:
Which CWM version are you using at the moment? Which Romis actually installed? Could you post a link for "philz"?
Click to expand...
Click to collapse
The latest one, arco's cm11 unofficial, and here's the link http://forum.xda-developers.com/showthread.php?t=2557019
Your screenshot shows "philz 6.01.4" the downloadlink http://d-h.st/users/philz_touch/?fld_id=29384#files is broken. It seems if it was an old version of cwm you try to flash. For running kitkat you need Arco's 6.0.4.5 i suppose. http://forum.xda-developers.com/showthread.php?t=1446593 works like a charm
LS.xD said:
Your screenshot shows "philz 6.01.4" the downloadlink http://d-h.st/users/philz_touch/?fld_id=29384#files is broken. It seems if it was an old version of cwm you try to flash. For running kitkat you need Arco's 6.0.4.5 i suppose. http://forum.xda-developers.com/showthread.php?t=1446593 works like a charm
Click to expand...
Click to collapse
How about hurtsky kernel? I get an 'installation aborted' message while flashing it too~
quanlim said:
How about hurtsky kernel? I get an 'installation aborted' message while flashing it too~
Click to expand...
Click to collapse
Did you flash your CWM 6.0.4.5 via odin? And did you a full wipe before installed CM11? AND if you want to flash a zip via recovery pls put it in the root of your sd-card. I just minded it's in "bluetooth". Try to copy the file you want to flash using a usb-cable copying it in the sd-card root directory. May be that helps.
LS.xD said:
Did you flash your CWM 6.0.4.5 via odin? And did you a full wipe before installed CM11? AND if you want to flash a zip via recovery pls put it in the root of your sd-card. I just minded it's in "bluetooth". Try to copy the file you want to flash using a usb-cable copying it in the sd-card root directory. May be that helps.
Click to expand...
Click to collapse
CWM flashed through the app flashify, full wipe before installing CM11, I've try installing from SD card, it's in bluetooth cause I try redownloading from my tab and transfer to my phone
quanlim said:
CWM flashed through the app flashify, full wipe before installing CM11, I've try installing from SD card, it's in bluetooth cause I try redownloading from my tab and transfer to my phone
Click to expand...
Click to collapse
You got an laptop or computer, too?
LS.xD said:
You got an laptop or computer, too?
Click to expand...
Click to collapse
sure, but Odin can't detect my device while in download mode
quanlim said:
sure, but Odin can't detect my device while in download mode
Click to expand...
Click to collapse
You need Odin Multi 4.43 http://forum.xda-developers.com/attachment.php?attachmentid=710414&d=1315196302
And samsung usb drivers http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Be sure youre not running "KIES" on your computer. Force close or uninstall it before flashing via Odin Multi 4.43.
AND have activated "USB-Debugging" in CM11's "developer options"
THIS are the latest usb drivers http://forum.xda-developers.com/showthread.php?t=2038555
LS.xD said:
You need Odin Multi 4.43 http://forum.xda-developers.com/attachment.php?attachmentid=710414&d=1315196302
And samsung usb drivers http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Be sure youre not running "KIES" on your computer. Force close or uninstall it before flashing via Odin Multi 4.43.
AND have activated "USB-Debugging" in CM11's "developer options"
THIS are the latest usb drivers http://forum.xda-developers.com/showthread.php?t=2038555
Click to expand...
Click to collapse
But I've CWM installed, you are suggesting me to install again?
quanlim said:
But I've CWM installed, you are suggesting me to install again?
Click to expand...
Click to collapse
Sorry, forgot to say this. Yes i'd try flashing it via Odin. I flashed your zip on my phone. took a screenshot. It seems as your actual cwm does your phone not recognize as "ancora or i8150" and aborts the installation. This also can happen if you have modified something in your "build.prop" of the installed Android.
LS.xD said:
Sorry, forgot to say this. Yes i'd try flashing it via Odin. I flashed your zip on my phone. took a screenshot. It seems as your actual cwm does your phone not recognize as "ancora or i8150" and aborts the installation. This also can happen if you have modified something in your "build.prop" of the installed Android.
Click to expand...
Click to collapse
No luck, got this message while connecting 'USB device is malfunctioned......(blablabla)'...
quanlim said:
No luck, got this message while connecting 'USB device is malfunctioned......(blablabla)'...
Click to expand...
Click to collapse
You got this error even before you flashed to CM11?
LS.xD said:
You got this error even before you flashed to CM11?
Click to expand...
Click to collapse
No idea, before i flash cm11 i've never connect phone for odin b4, connecting as media device is ok
quanlim said:
No idea, before i flash cm11 i've never connect phone for odin b4, connecting as media device is ok
Click to expand...
Click to collapse
I got another idea Open flashify --> flash recovery img --> select twrp --> 2.7.0.0
I just installed it that way some minutes ago. Worked perfect for me. AND i got an awesome recovery now.
You can try out. 2.7.0.0 is KitKat compatible.
So i'm gonna hit the "thanks" button. Cause i never realized the new twrp if I did not read your post
LS.xD said:
I got another idea Open flashify --> flash recovery img --> select twrp --> 2.7.0.0
I just installed it that way some minutes ago. Worked perfect for me. AND i got an awesome recovery now.
You can try out. 2.7.0.0 is KitKat compatible.
So i'm gonna hit the "thanks" button. Cause i never realized the new twrp if I did not read your post
Click to expand...
Click to collapse
I will try too, will report back, thx for your time
So I've try flashing Philz through twrp, working now =)
quanlim said:
So I've try flashing Philz through twrp, working now =)
Click to expand...
Click to collapse
nice1, BUT which version of PhilZ you got now? An actual one?
I just read the post. v6.0.1.4 BUT its KitKat compatible. May be i'm gonna give it a try, too
---------- Post added at 08:03 AM ---------- Previous post was at 07:32 AM ----------
PhilZ is just great A modified 6.0.4.5 :good:
LS.xD said:
nice1, BUT which version of PhilZ you got now? An actual one?
I just read the post. v6.0.1.4 BUT its KitKat compatible. May be i'm gonna give it a try, too
---------- Post added at 08:03 AM ---------- Previous post was at 07:32 AM ----------
PhilZ is just great A modified 6.0.4.5 :good:
Click to expand...
Click to collapse
So you've tried out philz?
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Jestic said:
Hello Everyone:
I'm having a problem flashing a ROM. I'm currently on CM 11 from the N7105 forum but would like to revert back to 4.3. I'm trying to flash Skynote Air, the vanilla version. I follow the steps provided and when I try to install the zip, im being given a system 7 error and an error on the zip file. I'm using philz touch CWM by the way. Is it because im on CM11 from the N7105 or is it the zip file? When trying to download the zip file from the ROM thread, it was coming up blank and I downloaded a mirrior. Before the CM11, I was running seanzscreams Sky Note 4.3. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
Are you using 5.15 version of Philz ? If so, try updating it.
dicksteele said:
Are you using 5.15 version of Philz ? If so, try updating it.
Click to expand...
Click to collapse
I'm using the 6.19.3 t0lteatt version.
Jestic said:
I'm using the 6.19.3 t0lteatt version.
Click to expand...
Click to collapse
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
dicksteele said:
Ahhhh.. Sorry I read but didn't read. Long day.
I read it again and saw the failed downloads.
A hosed zip is probably the case.
Go here
http://forum.xda-developers.com/showthread.php?t=2589891
Try getting back to just 4.3
Click to expand...
Click to collapse
I wonder if anyone has a working zip then.
Jestic said:
I wonder if anyone has a working zip then.
Click to expand...
Click to collapse
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
dicksteele said:
Did you download from the copy.com or skynote.com?
I'm grabbing off of the Skynote.com.. Pulling Sky_Note Air Vanilla F1.zip with no problems.. Still have 5 minutes to download.
I'll know if 15 minutes if it's good.
Click to expand...
Click to collapse
Im getting the rom from here :
http://skynote.camattin.com/)?
It downloads with no problem. The problem is when I try to install it from recovery.
Jestic said:
Im getting the rom from here :
http://skynote.camattin.com/)?
Click to expand...
Click to collapse
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
dicksteele said:
Same place I just downloaded from.. Copying to phone, flashing in 5.
Only difference is I'm using TWRP as my custom recovery.
Only because personal preference... My fat fingers press buttons on Philz by mistake. I hit reboot 80% of the time before I even do anything.
EDIT: I had a copy of Philz on my phone, philz_touch_6.07.9-t0lteatt.zip. My download flashed fine.
I gotta hit the sack... Good luck
Click to expand...
Click to collapse
Interesting. Thanks for the help.
Jestic said:
Interesting. Thanks for the help.
Click to expand...
Click to collapse
http://www.androidfilehost.com/?fid=23329332407583259
Here's what I used
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
DoctorQMM said:
See my post #2361 in seanZscreams SkyNoteAir thread here: http://forum.xda-developers.com/showthread.php?p=50682717
I had same Status 7 error. In PhilZ Touch Recovery ( in version 6.19.3 which is actually 6.19.2) in Install menu, make sure you UNCHECK "Don't allow old binary update" then flash rom. You may have a corrupt data partition (I did). If so, you'll have to wipe /data/media partition. Read my post and reference links. Has to do with the change from CWM base 6045 to 6047 .
Click to expand...
Click to collapse
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Jestic said:
Thanks for the help. I just installed the latest TWRP and it flashed fine. Thanks.
Click to expand...
Click to collapse
Glad you're back up and running. .. btw, PhilZ just posted an updated CWM Touch Recovery [6.25.0] for our Note2 [t0lteatt device tree] which now automatically determines if what you're flashing has older binary code embedded in its binary-script to avoid the dreaded Status7 errors.
hi
i just found my old samsung GT-S5660M but i cannot remember the pattern code, so i boot in recovery mode to wipe data but here's the problem: my volume button is not working. i cannot navigate the menu at all.
so my question is, how can i wipe data/factory reset my phone without the volume button
the phone is not rooted and the stock recovery is insalled
thanks
PX
skfunnyboy said:
hi
i just found my old samsung GT-S5660M but i cannot remember the schema code, so i boot in recovery mode to wipe data but here's the problem: my volume button is not working. i cannot navigate the menu at all.
so my question is, how can i wipe data/factory reset my phone without the volume button
the phone is not rooted and the stock recovery is insalled
thanks
Click to expand...
Click to collapse
PX Recovery is what you need but i am not sure how you will flash px recovery without working volume button
P.S: Can You access Download mode, is your volume + button working?
waqaswasil said:
PX Recovery is what you need but i am not sure how you will flash px recovery without working volume button
P.S: Can You access Download mode, is your volume + button working?
Click to expand...
Click to collapse
no, , i think the up volume button is broke too
skfunnyboy said:
no, , i think the up volume button is broke too
Click to expand...
Click to collapse
can you use adb to reboot into download mode?
waqaswasil said:
can you use adb to reboot into download mode?
Click to expand...
Click to collapse
yeah i can i tried to flash the stock rom using odin but when the phone started back, the pattern code was still there
skfunnyboy said:
yeah i can i tried to flash the stock rom using odin but when the phone started back, the pattern code was still there
Click to expand...
Click to collapse
i have an odin flashable tar for twrp, wait till tomorrow so i can upload it for you as i dont have access to my pc right now
waqaswasil said:
i have an odin flashable tar for twrp, wait till tomorrow so i can upload it for you as i dont have access to my pc right now
Click to expand...
Click to collapse
that would be awesome, ill wait for you to upload it
thanks
LINK
skfunnyboy said:
that would be awesome, ill wait for you to upload it
thanks
Click to expand...
Click to collapse
OK, so here's the link:
http://d-h.st/qL2
:highfive:
All Credits To: @konstantin12 For Compiling Stable TWRP For Gio
Yiiiiiiiiiis :d
waqaswasil said:
OK, so here's the link:
(snip)
:highfive:
All Credits To: @konstantin12 For Compiling Stable TWRP For Gio
Click to expand...
Click to collapse
Thank you so much, it worked at first i thought it would brick the phone because of the model difference (GT-S5660 - GT-S5660M) but it worked !
Feeling Happy For Helping Someone!!!
skfunnyboy said:
Thank you so much, it worked at first i thought it would brick the phone because of the model difference (GT-S5660 - GT-S5660M) but it worked !
Click to expand...
Click to collapse
Now that you've got the recovery working, you can try any other touch based recovery like PhilZ Recovery or PX Recovery and don't use stock ROM as custom ROMs are faster than stock ROM, now that you've got a custom recovery, it wouldn't be so difficult for you. :laugh: :highfive: :fingers-crossed:
But first confirm that the recovery or ROM you are going to flash will work with Canadian Gio (GT-5660M) or not or you will have to use ODIN again.
If You Want to Keep TWRP, you can flash the updated version (Released Yesterday) from your current recovery from here:
http://forum.xda-developers.com/showthread.php?t=2728689
as the version you currently have is one year old.
waqaswasil said:
Now that you've got the recovery working, you can try any other touch based recovery like PhilZ Recovery or PX Recovery and don't use stock ROM as custom ROMs are faster than stock ROM, now that you've got a custom recovery, it wouldn't be so difficult for you. :laugh: :highfive: :fingers-crossed:
But first confirm that the recovery or ROM you are going to flash will work with Canadian Gio (GT-5660M) or not or you will have to use ODIN again.
If You Want to Keep TWRP, you can flash the updated version (Released Yesterday) from your current recovery from here:
http://forum.xda-developers.com/showthread.php?t=2728689
as the version you currently have is one year old.
Click to expand...
Click to collapse
do you have a odin flashable version for TWRP new version? if not ill try to flash the img but i prefer odin
skfunnyboy said:
do you have a odin flashable version for TWRP new version? if not ill try to flash the img but i prefer odin
Click to expand...
Click to collapse
Dont Flash This as this is not stable yet. i have tested it and i was stuck in recovery until i flashed a new one Use PhilZ Recovery Which is also touch based and one word you will say after using this is AWESOME!!! BTW flashing an .img through terminal or flashing .zip through recovery is easier than flashing a .tar via ODIN
waqaswasil said:
Dont Flash This as this is not stable yet. i have tested it and i was stuck in recovery until i flashed a new one Use PhilZ Recovery Which is also touch based and one word you will say after using this is AWESOME!!! BTW flashing an .img through terminal or flashing .zip through recovery is easier than flashing a .tar via ODIN
Click to expand...
Click to collapse
does philz touch recovery supports rfs and ext4?
kaiserlourdes said:
does philz touch recovery supports rfs and ext4?
Click to expand...
Click to collapse
i don't know because I have not tried it on stock rom (RFS Based) but I have a strong feeling that it will work!
Maybe @Bhargav97 or @belyava can help you!!!
skfunnyboy said:
do you have a odin flashable version for TWRP new version? if not ill try to flash the img but i prefer odin
Click to expand...
Click to collapse
waqaswasil said:
Dont Flash This as this is not stable yet. i have tested it and i was stuck in recovery until i flashed a new one Use PhilZ Recovery Which is also touch based and one word you will say after using this is AWESOME!!! BTW flashing an .img through terminal or flashing .zip through recovery is easier than flashing a .tar via ODIN
Click to expand...
Click to collapse
There's a stable and fully working version of TWRP released. DL in my signature
waqaswasil said:
i don't know because I have not tried it on stock rom (RFS Based) but I have a strong feeling that it will work
Click to expand...
Click to collapse
No it won't! No custom recovery does support the rfs pertition!
belyava said:
No it won't! No custom recovery does support the rfs pertition!
Click to expand...
Click to collapse
@belyava no offence but I think you are wrong here (maybe I am ) @kaiserlourdes I Think You Should Try It as it will do NO HARM and you can always revert back to your current recovery by odin or terminal method
---------- Post added at 08:13 PM ---------- Previous post was at 08:11 PM ----------
belyava said:
There's a stable and fully working version of TWRP released. DL in my signature
Click to expand...
Click to collapse
YUP! I Noticed That. You Are Cool DUDE!
Thanks!
waqaswasil said:
@belyava no offence but I think you are wrong here (maybe I am ) @kaiserlourdes I Think You Should Try It as it will do NO HARM and you can always revert back to your current recovery by odin or terminal method
Click to expand...
Click to collapse
Could you name me a flashable ctock rom that has rfs partition, not ext?
waqaswasil said:
YUP! I Noticed That. You Are Cool DUDE!
Thanks!
Click to expand...
Click to collapse
You're welcome
belyava said:
Could you name me a flashable ctock rom that has rfs partition, not ext?
Click to expand...
Click to collapse
But there is a CWM Recovery by phiexz that supports Both RFS and EXT4!
waqaswasil said:
But there is a CWM Recovery by phiexz that supports Both RFS and EXT4!
Click to expand...
Click to collapse
yes, you are right, it does exist! But! it is able only to backup/restore stock roms. It could flash ext-based roms, but not rfs-roms, only odin can
belyava said:
yes, you are right, it does exist! But! it is able only to backup/restore stock roms. It could flash ext-based roms, but not rfs-roms, only odin can
Click to expand...
Click to collapse
That's what @kaiserlourdes meant (to backup/restore stock rom).
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
ah_hin said:
Hi everyone!
I have just bought a Galaxy Tab 3 Lite (SM-T110). and I had flashed TWRP and rooted it, HOWEVER, after I tried to boot into recovery using "Quick Boot", the system keeps going into Recovery no matter what.
I have tried to use Odin to reflash the recovery, and I have tried to flash a different custom ROM (StockRom-V1.1-T110) using recovery, but whenever it reboots, it just goes straight to recovery.....
How can I fix this?
Please help!
Click to expand...
Click to collapse
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
moonbutt74 said:
reflash your kernel, and get rid of quick boot. find a dead simple reboot widget.
m
Click to expand...
Click to collapse
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Help
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
rajmisc said:
I am in this loop too! I am a n00b.. can you pl let me know how to reflash kernel on the T110?
Click to expand...
Click to collapse
erikaj28 said:
I am also a noob and I turned it off and it keeps going into recovery. I have a t110.
Click to expand...
Click to collapse
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
ah_hin said:
I didn't know how to just flash the kernal, so I flash the stock firmware with odin.
and everything works now.
download THIS
and extract the file, and use odin to flash it, doesn't take that long, but all the apps and settings will be reset.
To install stock firmware, go to this THREAD, and watch "GALAXY TAB 3 UNBRICK AND RESTORE", great tutorial by Rootjunky
Click to expand...
Click to collapse
Awesome! Thanks a ton!
Flash Files For Tab 3 Kids HELP
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
RK KINGKONG said:
I flashed the proper and updated files followed the video with rootjunky however i cant boot system just keeps going into recovery .. i made a backup but will it restore a backup from the moment after i flashed already ?
i have the kids mode Tab , HELP before KIDS get home lol
is The Tab 3 for kids supported , i just tried it on this yellow thing and now i have a dead banana lol
Click to expand...
Click to collapse
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
how do i flash the full stock rom
ah_hin said:
did you use the firmware that I linked to? you might have to find the version for the kid version, because the firmware I linked to is for the Tab 3 lite.
Sent from Sony ZL
Click to expand...
Click to collapse
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
RK KINGKONG said:
i got confused and tried using T-210 on T-2105 I can only boot to recovery or download
i just downloaded T2105UEAMI5_T2105XARAMI5_XAR stock firmware US i hope this is it but when i go to odin it wont find file , do i have to extract from zip ? but theres another file called SS_DL.dll so im not sure now
Click to expand...
Click to collapse
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
gr8nole said:
Extract it. Odin needs ...tar.md5 files.
Sent from my SCH-I605
Click to expand...
Click to collapse
got you and thank you for your time .. now does this other file even matter usually they dont come in these tar zips
SS_DL.dll whats that for
Same situation. I rooted it fine. Installed a custom rom. No issues. Then it asked to update the supersu binary. Did that and now it keeps booting into TWRP no matter what I do. Gonna start fresh and this time I'll not use TWRP to update the binary I guess.
To fix the booting in recovery
flash stock recovery with oodin
now go to stock recovery
select clear cache
it will show error (and recovery crashes) and tab will boot normally.