[Q] Cannot update prl after activating service with Straight Talk - Sprint Samsung Galaxy Note II

Before I describe my issue, I'd like to state that I have searched high and low for answer to no avail. I am using a Sprint Galaxy Note II that has been upgraded to 4.3 stock. It was unrooted when my issue began, but I went ahead and rooted it to try and help my problem.
Two days ago I signed up for Straight Talk Bring your own phone. I entered the provided code which took me to the hands free activation. The activation proceeded successfully (my phone said success) until it forced a prl update. It says it fails (each time it tries the prl update) and immediately reboots the phone. Once booted the activation attempts again and repeats over and over unless I cancel before it gets to the prl update. Strangely enough if I try to make a call it says my phone has not yet been activated, and yet a few times after waiting I can make calls (verified they are coming from my new number), but no data functions. If I then try and complete the activation (the incomplete notification remains), I'm back to square one.
Straight Talk techs have assured me that my phone is active throughout their system and the sprint towers are having no issues. They say other Note II's have been successful. My phone is communicating with the towers as I get the LTE icon during activation.
As an experiment I activated a Samsung Galaxy 3 (never rooted) using the same method and it went through fine. It updated the prl and is now working like a champ. I am now at wits end with my Note. I have faith that all would function if I could get the prl to update and I haven't a clue how to get there from here. I have also been unsuccessful obtaining my MSL even after rooting. A little history on the phone is that it was active with Sprint and it was rooted at 4.1. I returned it to stock to take the 4.3 update.
If anyone can help it would be greatly appreciated.

Sherryluv5 said:
Before I describe my issue, I'd like to state that I have search high and low for answer to no avail. I am using a Sprint Galaxy Note II that has been upgraded to 4.3 stock. It was unrooted when my issue began, but I went ahead and rooted it to try and help my problem.
Two days ago I signed up for Straight Talk Bring your own phone. I entered the provided code which took me to the hand free activation. The activation proceeded successfully until it forces a prl update. It says it fails and immediately reboots the phone. Once booted the activation attempts again and repeats over and over unless I cancel before it gets to the prl update. Strangely enough if I try to make a call it says my phone has not yet been activated, and yet a few times after waiting I can make calls (verified they are coming from my new number), but no data functions. If I then try and complete the activation (the incomplete notification remains), I'm back to square one.
Straight Talk techs have assured me that my phone is active throughout their system and the sprint towers are having no issues. They say other Note II's have been successful. My phone is communicating with the towers as I get the LTE icon during activation.
As an experiment I activated a Samsung Galaxy 3 (never rooted) using the same method and it went through fine. It updated the prl and is now working like a champ. I am now at wits end with my Note. I have faith that all would function if I could get the prl to update and I haven't a clue how to get there from here. I have also been unsuccessful obtaining my MSL even after rooting. A little history on the phone is that it was active with Sprint and it was rooted at 4.1. I returned it to stock to take the 4.3 update.
If anyone can help it would be greatly appreciated.
Click to expand...
Click to collapse
If it's active in their system and if their systems are compatible with your phone then you should be able to update the profile and PRL with no issues. Make sure you're connected to WiFi. There isn't much else you can do short of cloning another phones information onto it but then you won't get LTE. Are you sure it's active on their system and not still attached to Sprint?
Sent from my SPH-L900. Please hit the thanks button if I helped you out!

ecs87 said:
If it's active in their system and if their systems are compatible with your phone then you should be able to update the profile and PRL with no issues. Make sure you're connected to WiFi. There isn't much else you can do short of cloning another phones information onto it but then you won't get LTE. Are you sure it's active on their system and not still attached to Sprint?
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
It is active in their system and unfortunately I don't have another phone to clone. My prl says 2010. It will not update over wifi or LTE. I've tried factory resets (before I rooted). I'm sure it's something with my phone. I just can't pinpoint it. The only progress I have made is that I did manage to extract my MSL. The reps at straight talk said my phone would use sprint towers to activate. Also I'm wondering it my note would use the same prl at the S3 I activated. Thanks so much for trying to help.

You can do *22804 and it should update the prl
Sent from my SPH-L900 using XDA Premium 4 mobile app

Although I may be completely wrong here, I can only go off of experience saying I haven't had a problem updating the profile and PRL or getting service from a "flashed to" carrier, by replacing the original carriers settings. I've tried NUMEROUS Sprint and Boost Mobile PRLs on my phones (I've had a EVO 4G, S2, Nexus, EVO LTE, and Note 2 on Boost...yeah I change phones a lot) and never had an issue getting Boost Mobile service since they use Sprint's towers.
First off, is the Note 2 still active on Sprint? CALL Sprint and verify this. I know if I try to activate a Verizon iPhone 4 on Page Plus that it'll default to Verizon OTA programming and pull that data when I WANT it to pull PP's OTA data via *228 (or *22890). Same thing may be applied here (except with update profile instead of *228). Secondly, is the phone's MEID the same as what you registered on the account? Although I think the L900 is set to show the OEM MEID in settings, I've seen some US Cellular (and maybe Verizon) phones that have shown the OEM MEID in settings but when hooked up in diag mode through the computer showed the real MEID which was completely different. Just something else to consider to make sure you cover everything!
Sent from my SPH-L900. Please hit the thanks button if I helped you out!

ecs87 said:
Although I may be completely wrong here, I can only go off of experience saying I haven't had a problem updating the profile and PRL or getting service from a "flashed to" carrier, by replacing the original carriers settings. I've tried NUMEROUS Sprint and Boost Mobile PRLs on my phones (I've had a EVO 4G, S2, Nexus, EVO LTE, and Note 2 on Boost...yeah I change phones a lot) and never had an issue getting Boost Mobile service since they use Sprint's towers.
First off, is the Note 2 still active on Sprint? CALL Sprint and verify this. I know if I try to activate a Verizon iPhone 4 on Page Plus that it'll default to Verizon OTA programming and pull that data when I WANT it to pull PP's OTA data via *228 (or *22890). Same thing may be applied here (except with update profile instead of *228). Secondly, is the phone's MEID the same as what you registered on the account? Although I think the L900 is set to show the OEM MEID in settings, I've seen some US Cellular (and maybe Verizon) phones that have shown the OEM MEID in settings but when hooked up in diag mode through the computer showed the real MEID which was completely different. Just something else to consider to make sure you cover everything!
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
I tried and it said the number or code is invalid. I will try again when I have a stronger signal. Uploading screenshot of phone connection specs. They look abnormal, but I am not an expert. I am running sprint stock 4.3 rom that was updated with kies. It is rooted but only after issue started happening. The phone number shown is not a number that I have ever had with Spring of Straight Talk

Sherryluv5 said:
I tried and it said the number or code is invalid. I will try again when I have a stronger signal. Uploading screenshot of phone connection specs. They look abnormal, but I am not an expert. I am running sprint stock 4.3 rom that was updated with kies. It is rooted but only after issue started happening. The phone number shown is not a number that I have ever had with Spring of Straight Talk
Click to expand...
Click to collapse
MMM I think I know what's going on here. You need to change your MDN and MIN to something other than 000000xxxx. I think that's forcing a HFA loop every time you boot the phone. Are you familiar with CDMA workshop or DFS CDMA tool? You'll need one of these to possibly fix your problem. Essentially, i think your phone needs to update the profile. This wouldn't be a big issue but I think HFA is strictly sprint and update profile won't work until you get rid of the HFA nag without disabling SprintDM. Check out the two programs I mentioned.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!

ecs87 said:
MMM I think I know what's going on here. You need to change your MDN and MIN to something other than 000000xxxx. I think that's forcing a HFA loop every time you boot the phone. Are you familiar with CDMA workshop or DFS CDMA tool? You'll need one of these to possibly fix your problem. Essentially, i think your phone needs to update the profile. This wouldn't be a big issue but I think HFA is strictly sprint and update profile won't work until you get rid of the HFA nag without disabling SprintDM. Check out the two programs I mentioned.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
This might just work. I have CDMA workshop demo version but am unsure how to conduct the procedure. I really need to get it fixed because now hubby is in the hospital and has the s3. This is my only means of communicating with him when I'm not there. Wish I had the funds to just buy a note 2 that is unlocked but that is not an option right now.

Sherryluv5 said:
This might just work. I have CDMA workshop demo version but am unsure how to conduct the procedure. I really need to get it fixed because now hubby is in the hospital and has the s3. This is my only means of communicating with him when I'm not there. Wish I had the funds to just buy a note 2 that is unlocked but that is not an option right now.
Click to expand...
Click to collapse
If you're on a CDMA network, meaning your carrier didn't give you a SIM card, then having an unlocked phone does nothing for you. Straight talk might be CDMA and GSM though, never looked too much into it. Anyway, you're going to need to dial ##DIAG# in your dialer to bring up the "port" menu. Leave it on PDA and select Qualcomm USB settings or something along those lines. You should be at MTP. Switch it to DM+Modem+ADB. Plug your device into your computer. In device manager you should be able to see which port your computer assigned to it. If you have to, change the port number to be COM25 or under. Go into CDMA WS, connect to the port, send the password: 2012112120131219 and your SPC. Go to NAM1 and read. You should see your MDN and MIN are kind of zeroed out. Replace them with something other than zeros, like MDN: 7737777777 MIN: 3122222222. Reboot your phone. HFA nag should've gone away (if you're on 4.3). Now you should be able to update your profile WITHOUT having to go through Sprint's HFA, and after it grabs everything it needs, you should be on Straight Talk.

ecs87 said:
If you're on a CDMA network, meaning your carrier didn't give you a SIM card, then having an unlocked phone does nothing for you. Straight talk might be CDMA and GSM though, never looked too much into it. Anyway, you're going to need to dial ##DIAG# in your dialer to bring up the "port" menu. Leave it on PDA and select Qualcomm USB settings or something along those lines. You should be at MTP. Switch it to DM+Modem+ADB. Plug your device into your computer. In device manager you should be able to see which port your computer assigned to it. If you have to, change the port number to be COM25 or under. Go into CDMA WS, connect to the port, send the password: 2012112120131219 and your SPC. Go to NAM1 and read. You should see your MDN and MIN are kind of zeroed out. Replace them with something other than zeros, like MDN: 7737777777 MIN: 3122222222. Reboot your phone. HFA nag should've gone away (if you're on 4.3). Now you should be able to update your profile WITHOUT having to go through Sprint's HFA, and after it grabs everything it needs, you should be on Straight Talk.
Click to expand...
Click to collapse
Tried the above but got lost on MIN. (is this the same as MSID?). Didn't find MIN anywhere. This is what I did try and it may have worked..so far, so good. I changed my number via the Straight Talk automated. I then tried the HFA which failed again, so I went in and maually programmed my username, MDN and MSID. I then tried mms and making calls and it worked. I then used root explorer to get rid of HFA by deleting the Sprint update apk. The prl 2010 remained and Sprint Zone says it is current. My only issue is that internet does not work though mms does. That is an issue I am now going to try and tackle. For the record, internet also does not work on the S3 that completed the HFA and prl update successfully. If anyone has any ideas on how to fix that I am open for suggestions. Thanks for your help on this. Please see screenshots..

Yes MIN is the same as MSID. You needed to program the numbers through a CDMA flashing program to get rid of the HFA nag. Now that you've programmed them through the phone...I'm not too sure how you're going to deal with the HFA. Yes, you disabled it, but you also disabled the ability to update the profile which is what you need to do for your data to work...

Success!
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.

Sherryluv5 said:
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.
Click to expand...
Click to collapse
Having the same problem too. Where did you find the old Sprint PRL file? Thanks

Thanks for the info but...
Sherryluv5 said:
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.
Click to expand...
Click to collapse
Im happy this worked for you. I believe you have to have an older Android OS to make the trick work. My question is, how can we make this work with a 4.4.2 OS? Much thanks in advance.

BuzzERKINdff said:
Having the same problem too. Where did you find the old Sprint PRL file? Thanks
Click to expand...
Click to collapse
Also would like to know thanks

donclark said:
Im happy this worked for you. I believe you have to have an older Android OS to make the trick work. My question is, how can we make this work with a 4.4.2 OS? Much thanks in advance.
Click to expand...
Click to collapse
My community rom (4.4.2 tw) has the ability to write prl via ##data# then view knot edit).
Sent from my SPH-L900 using XDA Premium 4 mobile app

Samsung Galaxy S3 (L710)
On both of my L710 (S3), the write PRL option was not showing. So ##data# didnt work for me. I had to install this app:
https://www.dropbox.com/s/32jc7i0w2fa2oxw/PRLWUnhide_S3_MA6.zip/
This made it so I was able to see that function.
Here are a bunch of PRL files. I believe the latest is 25018. If its not listed there, just do a search for the zip file:
http://forum.xda-developers.com/showthread.php?p=35576100
I was able to update the Profile and PRL after writing the TEST.prl file.
However, that didnt seem to solve my problem.
No 3g/4g, with HFA loop, with FreedomPOP as my provider (SPRINT MVNO).
I get a "unable to establish a data connection" error MIP:67 on one of the phones when trying to activate.
On the other phone, I get the notice to call customer care (SPRINT).
I believe this to be an ICCID issue, but I cannot confirm this:
https://community.sprint.com/baw/thread/143514

Pull up your dialer, punch in ##72786#. Let the phone go through its little process, then try to update prl and profile.
I am currently using a sprint note 2 on straight talk, had the same issue, and that's what I did to fix it.

Related

[Q] Can Someone Please Help, I am willing to donate

I have an Evo on Boost now for 2 months rooted with no problems at all. I change roms all the time, update kernels, put themes and never any problems. Yesterday there was a post to update the pri to version 1.40.
I did it and it said something about resetting the phone. It shut down and ever since then I have no 3g at all. The only way I can surf the net or go to the market place is through my wireless internet in my home. I can send/receive texts/mms/phone calls but no internet.
Also, it constantly come up with an error 67 data call failed.
Thanks guys in advance
You could try updating profile under settings and system update.. let me know if this worked.. my 3g wasnt working went to sprint and did the update and is back on..
sent from my Evo
##3282#
edit mode
enter msl code
data profile
menu
restore
this will reset ALL data profile information on your phone. it will then reboot and reload all said information by re-provisioning your phone.
if you do not know your msl, call sprint tech support and ask nicely for it. they will usually give it to you. if not, hang up and call back. or just tell them you have no data and want to re-provision your phone and they will walk you through what i just did.
as a side note, sometimes this error pops up, for no good reason and goes away after a while. my guess is in your situation this isn't the case. you had a hiccup that's easily fixed.
carguy4471 said:
##3282#
edit mode
enter msl code
data profile
menu
restore
this will reset ALL data profile information on your phone. it will then reboot and reload all said information by re-provisioning your phone.
if you do not know your msl, call sprint tech support and ask nicely for it. they will usually give it to you. if not, hang up and call back. or just tell them you have no data and want to re-provision your phone and they will walk you through what i just did.
as a side note, sometimes this error pops up, for no good reason and goes away after a while. my guess is in your situation this isn't the case. you had a hiccup that's easily fixed.
Click to expand...
Click to collapse
Thank you for trying to help I really do appreciate it, but I don't have a sprint account I am on Boost Mobile and have been for 2 months now without any issues but this one
Could be a PRL problem? I don't know anything about getting an EVO on Boost, but I assume part of the process was downloading a PRL for Boost to connect to their towers?
Go back to the guide you followed and redo the steps.
joey72 said:
Thank you for trying to help I really do appreciate it, but I don't have a sprint account I am on Boost Mobile and have been for 2 months now without any issues but this one
Click to expand...
Click to collapse
this will still work on your phone. contact boost to get your msl. or use CDMA workshop. there is a thread in the dev section on using CDMA workshop.
carguy4471 said:
this will still work on your phone. contact boost to get your msl. or use CDMA workshop. there is a thread in the dev section on using CDMA workshop.
Click to expand...
Click to collapse
What exactly will work on my phone?? and what should I do in CDMA Workshop? I have the program and I do know my MSL, so if you can explain what I should do to get back my data connection that would be great!
I tried to update the PRI and wiped my data profile for boost mobile and now without wifi on, I get error 67 data call failed
By the way, Thank you for trying to help, you guys are the best
No offense, but it really should not be that difficult if you set this up before!! I assume that you in fact did not set your EVO up on Boost, but gave it to someone else to set up, correct?
Simply refer to the original guide, or steps you took yourself to set the phone up on Boost in the first place - or give it back to the person that did it and let them fix it.
nukedukem said:
No offense, but it really should not be that difficult if you set this up before!! I assume that you in fact did not set your EVO up on Boost, but gave it to someone else to set up, correct?
Simply refer to the original guide, or steps you took yourself to set the phone up on Boost in the first place - or give it back to the person that did it and let them fix it.
Click to expand...
Click to collapse
Hey Nukedukem,
No offense taken, however you might want to check your panties to see if you're getting your period. I thought this was a forum for people to help other people "do it themselves". If I, and everyone else did what you suggested, you'd be outside sitting on the curb with nothing to do. So if you have nothing nice to suggest, then I suggest you pass over my post and go "not help" someone else. Thanks
To everyone else: yes the guy that first did my phone is no longer to be found so if you have any suggestions I would greatly appreciate them. Also, if a programmer can help I'm more than willing to donate.
Thanks again guys
The error 67 I think may be caused by the network rejecting your phones credentials, I had this same problem last night. The only way I could fix it was to restore a nandroid backup and then have it update my profile and PRL. You may be able to get away with just restoring the backup though, trying to update anything is most likely not a good idea since you are using a network other then what the software was written for.
joey72 said:
Hey Nukedukem,
No offense taken, however you might want to check your panties to see if you're getting your period.
Click to expand...
Click to collapse
Sorry you took offense, but you are in WAY over your head. If you want help from a developer, you need to SEARCH FIRST.
WWW.GOOGLE.COM
Since I'm such a nice guy, I searched for you...30 seconds later I learned how to port my EVO to Boost Mobile.
http://cellphoneforums.net/boost-mobile/t307946-how-get-sprint-phones-boostmobile-cdma.html
Oh, and uh...try not to choke on my menorrhagia.
That method did work MONTHS ago but not now that SPRINT changed up their website your not allowed to do esn swaps anymore. I was able to do it months ago with my touch pro2 and i have an EVO now and just tried to reprogram my phone cause i had the msl code and input my boost number and msid like i did before with the touch pro2. It reseted but when i went to make a call it said account cannot be validated so had to get sprint service again. Soon as someone comes out with a VALID way of getting the EVO working on boost Im going back to them.
Tech360 said:
That method did work MONTHS ago but not now that SPRINT changed up their website your not allowed to do esn swaps anymore. I was able to do it months ago with my touch pro2 and i have an EVO now and just tried to reprogram my phone cause i had the msl code and input my boost number and msid like i did before with the touch pro2. It reseted but when i went to make a call it said account cannot be validated so had to get sprint service again. Soon as someone comes out with a VALID way of getting the EVO working on boost Im going back to them.
Click to expand...
Click to collapse
did u fix the problem?
it's because you have a sprint 1.4 pri and need a modified boost pri...until that is changed, no 3g for you, but seriously, there is an app that gives you your MSL code

[Q] Default Sprint Banner

I picked up a used Evo 4G recently only to find the previous owner had it flashed to MetroPCS.
As far as I can tell I've got it all back on the Sprint network but still having some problems, example, it'll only call out or receive voicemail when roaming. I want to take it to the Sprint store but the banner says "MetroPCS".
I need to know exactly what the default Sprint banner says so I can fix it up before taking it in.
The device is showing my @sprintpcs email address, downloaded the latest PRL (60687).
I didn't know what the MSL was and didn't use cdma-workshop because on two different systems with two different antivirus software it came up as Malware. I set it to 000000 using a guide I found but could do with knowing what it should be. (Is the MSL unique to me as a customer, if so would I be able to find it from my Moment phone maybe?)
Anyway, the main thing is the banner. If I can set this then it'll be half the battle.
TIA.
P.S. Why wouldn't this be reset after a factor reset? Is there a code that will literally wipe everything or am I missing something that I need?
I think it didn't reset because its a radio thing, not software. Not the smartest on carrier flashing things though.
Sent from my PC36100 using XDA
http://themikmik.com/showthread.php?8477-Radio-Update-1-21-2012-2-15-00-12-19
Post 1 and use the 3rd download link for the PRI, baseband and WIMAX.
Flash it and see if that fixes the issue.
Thanks for the link. I have to leave in 10 minutes so I'm not going to have time. I have tried to get into recovery before (hold down volume while powering on) but it doesn't seem to work for me so I need to look around and see what I'm missing. If Sprint can't help then I'll give this a go.
They did tell me they had a service outage in this area so I'll try on my way home.
Thanks for the suggestions.
Make sure fastboot is off in settings, and once that is off, pull out battery and put back in then try again. Or get quickboot or something from the play store.
Sent from my PC36100 using XDA
Thanks for the posts. Sprint was saying that they couldn't get it to receive a signal so they'll just replace it for me. That $8 a month that I've been paying forever finally pays off!

[Q] Phone is roaming when it shouldn't be

So i finally got the computer to communicate with the phone and all the proper drivers installed. I loaded up my configuration file from my old phone for qpst. There was no signal at all, after messing around with some settings I finally got a signal and the 3G icon, however upon trying to make a call to cricket to activate the phone its giving me the message as if the phone is roaming like im out of state. I was wondering if anyone would be so kind as to take a look at my qpst config file and see whats set wrong, I originally used the config file from this site for cricket and it worked great. now its not. please message me so i can email you the config file as i dont have access nor am i signed up to a hosting site.
heres the info on my phone:
Hardware version: 0004
Android version:2.3.5
Baseband version 2.15.00.01.15
Kernal version:2.6.35.10-g8b16b68 htc-kernal....
Build number:5.07.651.6 CL558861 release-keys (apparently the previous owner did an OTA but from what ive read since the update didn't change the hboot nothing should be affected by this)
Software number 5.07.651.6 710RD
PRI version: 42900
Also upon clicking on phone identity current username is the previous owners [email protected] and not what is displayed in qpst when i click on read from phone.
*EDIT* fixed this using ##3282# phone is still jacked up
The only other thing i can think of is that my new phone has yet to been activated but i wouldn't think this would matter, unless cricket gives me a new MIN number for my new phone.
I'm so confused
btw ive tried 7 different prls some hybrid but most of them not hybrid, ive tried nation wide roaming prls and non roaming prls. heres the list ive tried.
3510
45513
4697
1050
42900
45722
10900
at best i got welcome to verizon.
As I advised you on a previous thread. Join cricket users forum. They have dozens of cricket prls that will get you going. Once you get a welcome to cricket do an update *228 or *22804 it will give you the latest cricket prl in your area. Although you might find better signal download speeds with other prls.
Sent from my PC36100 using xda app-developers app
Calbha said:
So i finally got the computer to communicate with the phone and all the proper drivers installed. I loaded up my configuration file from my old phone for qpst. There was no signal at all, after messing around with some settings I finally got a signal and the 3G icon, however upon trying to make a call to cricket to activate the phone its giving me the message as if the phone is roaming like im out of state. I was wondering if anyone would be so kind as to take a look at my qpst config file and see whats set wrong, I originally used the config file from this site for cricket and it worked great. now its not. please message me so i can email you the config file as i dont have access nor am i signed up to a hosting site.
heres the info on my phone:
Hardware version: 0004
Android version:2.3.5
Baseband version 2.15.00.01.15
Kernal version:2.6.35.10-g8b16b68 htc-kernal....
Build number:5.07.651.6 CL558861 release-keys (apparently the previous owner did an OTA but from what ive read since the update didn't change the hboot nothing should be affected by this)
Software number 5.07.651.6 710RD
PRI version: 42900
Also upon clicking on phone identity current username is the previous owners [email protected] and not what is displayed in qpst when i click on read from phone.
*EDIT* fixed this using ##3282# phone is still jacked up
The only other thing i can think of is that my new phone has yet to been activated but i wouldn't think this would matter, unless cricket gives me a new MIN number for my new phone.
I'm so confused
Click to expand...
Click to collapse
no your MIN stays the same as long as your account and number are still the same. Have you already called cricket and given them the MEID number of the evo that you want to activate? also which rom are you using? its really hard to tell exactly where the problem is without seeing what settings you've used when you set it up in qpst.
haxin said:
no your MIN stays the same as long as your account and number are still the same. Have you already called cricket and given them the MEID number of the evo that you want to activate? also which rom are you using? its really hard to tell exactly where the problem is without seeing what settings you've used when you set it up in qpst.
Click to expand...
Click to collapse
I used the config file available for download off these forums, I googled qpst configuration file download n I think xda forums with the cricket config file was the first link, there's a few other cricket files available for download as well in that post as well. No I haven't called cricket yet to activate the phone but I don't see how activation would make the phone get out of roaming and go from Verizon to cricket towers, it never mattered before. I am using the stock Rom for now.
*edit* i switch to cyanogen mobile 4.0 rom as my phone got caught in a bootloop for some weird reason. fortunatly i rooted it and had smelkus's recovery loaded so everything should be fine now as far as the bootloop goes.
i'm going to try and activate the phone with cricket tomorrow and see if that solves the issue, i never had to activate before completing a flash in the past and dont understand how that would make the phone stop roaming on verizon towers but if this is the fix at lest someone else with the similar problem will have a fix, at the expense of me feeling incredibly stupid.
phone is now activated on crickets network and still roaming on verizon :-/
something i did notice is on the CDMA 2 tab which the tutorials dont mention is the spot where the MIN would go, (IMSI_S) there is a number there which im guessing was something from the previous owner of the phone, i tried putting my MIN there and in the CDMA tap I put my MIN in the same spot, but it seems to revert back to this other number. I also tried replacing it with all zeros. that didn't help either.
Im pretty sure i just need a correct prl. I have search throughout google and multiple forums for an phoenix arizona specific prl and any links to them are broken. I can now get the phone on the cricket network with zero bars, (using a nationwide standard prl) once in a while itll jump up to 2 bars but disappear before i can dial *228. If anyone has a phx az prl id like to give it a shot.

[Q] Flash back to sprint from ntelos???

So I recently bought a Sprint Note 2 that was flashed to Ntelos. (dirt cheap). I was going to use it on Ntelos because thats my current carrier, but the person that had it Left it attached to his prepaid account. So now I need to bring it back to sprint and have no clue how to do so. Does anybody know or can tell me where to look? I'm running out patience looking for answers
I don't think you can. But the way I lost my flash was Odin back to stock. At least that worked on the s3
Sent from my SPH-L900 using XDA Premium 4 mobile app
c_elliott1983 said:
So I recently bought a Sprint Note 2 that was flashed to Ntelos. (dirt cheap). I was going to use it on Ntelos because thats my current carrier, but the person that had it Left it attached to his prepaid account. So now I need to bring it back to sprint and have no clue how to do so. Does anybody know or can tell me where to look? I'm running out patience looking for answers
Click to expand...
Click to collapse
Please pardon me if this sounds dumb, but I am a newbie... I too have a Sprint Note 2. It used to be flashed to boost mobile. Now it's been flashed back to stock sprint ROM using file links and instructions right here in these forums. From what I gather, you want to go back to sprint? It's really simple. You do have the original MEID & Id ETC. right? Should be behind the battery when you remove it. I have successfully got my phone back to STOCK Sprint. It's really easy to do using TWRP and stock Sprint ROM files and DFS (there are others)...But these were the ones (programs) I used.. Read and read some more. Be patient (easier said than done..lol) you'll get it...It CAN be done...
bepatientw/me said:
Please pardon me if this sounds dumb, but I am a newbie... I too have a Sprint Note 2. It used to be flashed to boost mobile. Now it's been flashed back to stock sprint ROM using file links and instructions right here in these forums. From what I gather, you want to go back to sprint? It's really simple. You do have the original MEID & Id ETC. right? Should be behind the battery when you remove it. I have successfully got my phone back to STOCK Sprint. It's really easy to do using TWRP and stock Sprint ROM files and DFS (there are others)...But these were the ones (programs) I used.. Read and read some more. Be patient (easier said than done..lol) you'll get it...It CAN be done...
Click to expand...
Click to collapse
I hope so. lol. The goofball that had it before me flashed it to ntelos and left it on the account not used, but still attached. Actually made it difficult to sell as a ntelos phone, but I have some time today to play around with it today. I was told by sprint it needs a flash back to sprint. Sad part I have no fricken clue who flashed it to begin with it that way
Well first check the sticker underneath the battery. Have you verified it can be brought back tp sprint? If its ok on sprints end using the numbers on the back then you can move further. Let us know so we can direct you.
sent from my Provari with a mini rda!
patrao_n said:
Well first check the sticker underneath the battery. Have you verified it can be brought back tp sprint? If its ok on sprints end using the numbers on the back then you can move further. Let us know so we can direct you.
sent from my Provari with a mini rda!
Click to expand...
Click to collapse
Everything is correct. It can be activated on sprint. Ive already checked that multiple times
Ok well now you need to write the info from the sticker to the phone. You can use cdma workshop or dfs. Either program will work. You can also look at guides made for boost mobile. You can follow the guide. Instead of a donor phone you use the sticker info. Instead of changing your mmsc to boost you would change it to sprints. Either way get your msl first just in case. Use msl reader from the playstore. If it cannot read it push home. Then go to your dialer and push in ##3282# it will ahow a screen saying view or edit. Push edit. Enter a random 6 digit code. It doesnt matter what it is. It will give an error. Push home and hold it until recent tasks come up. Go to msl reader again and read the code again. It should give it to you this time.
sent from my Provari with a mini rda!
patrao_n said:
Ok well now you need to write the info from the sticker to the phone. You can use cdma workshop or dfs. Either program will work. You can also look at guides made for boost mobile. You can follow the guide. Instead of a donor phone you use the sticker info. Instead of changing your mmsc to boost you would change it to sprints. Either way get your msl first just in case. Use msl reader from the playstore. If it cannot read it push home. Then go to your dialer and push in ##3282# it will ahow a screen saying view or edit. Push edit. Enter a random 6 digit code. It doesnt matter what it is. It will give an error. Push home and hold it until recent tasks come up. Go to msl reader again and read the code again. It should give it to you this time.
sent from my Provari with a mini rda!
Click to expand...
Click to collapse
Msl is "000000" I tried some today with no luck. Everything failed in odin. Now i'm searching again, because its either odin mode or "firmware encountered a issue. Recovery from kies and try again. But it doesnt connect to kies. Actually wount connect even before I got started.
Got the phone back on. Still on Ntelos, so now I'm back to searching on how to remove this carriers flash. Nothing I've tried has worked
Hey guys I've got a similar problem. I got a note 2 and I'm wanting to flash it to boost but I haven't been able to read the HA/AAA keys. I did a reset ##786# to remove the old sprint account and downgraded to the LJC radio but I still get the access denied error for Nv_read on 466 and 1192. Also if I call 611 I get Ntelos wireless customer service and I'm kinda lost on what to do.
I didnt feed anyone lies. I have seen it done before. On my last phone. The epic touch 4g. If it doesnt work on this phone then thats too bad. I have never needed to flash a phone to another carrier.
Sent from my SPH-L900 using Tapatalk 4
In all fairness I have flashed a E4GT to an MVNO and back.
Google Chris41g's Epic to Boost steps. Follow the steps in there to change back your MEID only.
Flash a stock rooted restore - in this case I'll suggest MC2 rooted restore. This sets proper CSC info.
Turn phone on and ##72786#. Let HFA go through its steps.
LTE I can't say anything on since E4GT didn't have it.
The reason I did this way is because HFA will pull the HA/AAA keys and set the profile back on its own.
You only have to do it manually when flashing to MVNO because you can't use HFA.
Sorry but that's all the details I can mention on this thread - PM with any additional questions.

[Q] Help with Verizon SCH-I535 Phone to use on T-mobile

Hey everyone and thanks for taking the time to read this,
So the story goes as so: After doing some research couple months ago about the capability of the Verizon Galaxy S3 to work on T-mobile, i purchased it, and got it to successfully work on T-mobile(texts, calls, wi-fi). The problem is, i just recently upgraded to include a data plan, and i cannot access the internet, despite taking my phone to my cell phone dealer and contacting T-mobile.T-mobile even sent me a guide to do a mastery reset to factory in hopes to solve this problem, only to tell me afterwards that the phone version SCH-I535 is a "verizon locked-software" and i won't be able to set up an APN to work on the T-mobile network. This was all due to the fact that i was not able to set up a APN for T-mobile, and every time i tried to access it through setting, it brought me to a blank black page with the only option of "Reset to Default". After reading other forums and talking with some people, many have suggested i take this issue to XDA to find a solution.
So, here i am.....Does anyone know if it is possible for me to break/root/ or whatever it is called so i can successfully access the t-mobile network on my phone? Preferably an easier guide since i am sort of a newbie at this sort of stuff.
Thanks again for reading.
Before your Contract change, you were able to receive and make calls successfully with T-Mo Sim right ? Even now you can make calls too correct ? The reason I am asking this is to be able to check if you are really unlocked off of VZW. If you are not unlocked, then that would be the first step.
You are right, the APNs do drive Data Connection. If the stock firmware does not allow you to change APNs then you will have to root. Please post a screen of your Settings > About phone that shows your Rom Version, Baseband and Kernel.
Perseus71 said:
Before your Contract change, you were able to receive and make calls successfully with T-Mo Sim right ? Even now you can make calls too correct ? The reason I am asking this is to be able to check if you are really unlocked off of VZW. If you are not unlocked, then that would be the first step.
You are right, the APNs do drive Data Connection. If the stock firmware does not allow you to change APNs then you will have to root. Please post a screen of your Settings > About phone that shows your Rom Version, Baseband and Kernel.
Click to expand...
Click to collapse
Hey Perseus, thanks a lot for taking the time to reply. I bought the phone in the summer off someone who had verizon. I have always had T-mobile, and considering this phone is GSM, i decided to buy it because it would probably work for T-mobile. I had the phone unlocked, and i am currently using it to make calls, texts, and even use wi-fi with no problem. The only problem at this time is that i recently added a data plan which i cannot currently use. Here is a screen shot of what you have requested.
Thanks again
First try
Settings > More > Mobile Networks > Preferred Network Type.See what it is set to. Change it to LTE/GSM/WCDMA if needed. See the other option System Select as well.
Also separately try the following.
Hit ##DATA# in the Dialer. In the subsequent Menu choose EDIT > OTHERS > LTE APN
If all fails, please Root the phone and then try. The way you go about is
1. Flash a Custom Recovery via Odin. Make sure the version of Custom recovery is for your model D2VZW not D2TMO.
2. Flash a SuperSU zip file via Recovery and then hit fix permissions in the recovery.
Try the APN Settings after that. IF you can actually access them, then set them according to this link.
If all the above fails, I'd suggest a custom Rom for d2VZW.
You will never get 4g trust me I had one... you will just get the E
Sent from my SGH-T999L using xda app-developers app
Ok, so i tried to changed it to LTE and i got no service at all, so i switched it back to Global. I also tried the dialer thing several times, and got the " connection problem or invalid MMI code"
So i guess i am going to have to root the phone? Does anyone know a good video tutorial or written tutorial on how to safely do this? Also, what exactly is rooting?
HackThisThing said:
Ok, so i tried to changed it to LTE and i got no service at all, so i switched it back to Global. I also tried the dialer thing several times, and got the " connection problem or invalid MMI code"
So i guess i am going to have to root the phone? Does anyone know a good video tutorial or written tutorial on how to safely do this? Also, what exactly is rooting?
Click to expand...
Click to collapse
You have to enable the mmi codes to use them. Anyway as stated above your reply you will never get 3g or 4g just edge (seen it personally) which is pretty darn slow.. Not worth it if you ask me and be paying for data.. If you still want to root it and keep trying to add sons check the Verizon forums.. They could probably help you a lot more than on this side of the forums
Sent from my SGH-M919 using Tapatalk
Guys, he is not getting ANY data signal at all. His problem isn't getting the specific icon but being not able to change APNs.
@HackThisThing, you are better off following up on Verizon Device forum. That forum does have a video tutorial for Rooting. Here's forum link.
I don't think you will be able to change APNs without rooting. I checked with a buddy of mine who has the same device as you.
Here's a good answer to What is Rooting ?
Even if you CAN fix it, why bother if you can only get 2G? I'd sell it or trade it for a phone that's more compatible with T-Mobile 's network instead of paying for data and only getting dial-up speeds. I get that solving problems is fun, but OP do you want to live with only 2G?
Sent from my SGH-T999 using Tapatalk
I don't agree with that assessment. Just like the T999L phone, this device will work on LTE Bands just fine. OP just needs to wait for LTE to be rolled out in their area. There's a coverage map and roll out schedule on T-Mo website and the T-Mo News blog.
It's worth a look, but could still leave them with patchy coverage. If it's going to be a while, why wait when it's not hard to just trade the phone? I guess I don't see a reason why hold out on getting a Verizon phone to work when you could just get one that works now with little to no monetary loss. It's just a Verizon S3, not really something worth "waiting" for when they could get the same thing but more functional on their network of choice.
They made an honest mistake and waiting might give them "good enough" service - but other than that they're stuck with dial up speed only and risk bricking a phone they could just trade or sell now.
Maybe I'm just impatient and risk averse.
Sent from my SGH-T999 using Tapatalk
OP has already purchased this VZW version.
Same Problem...
I have the same problem....
How to get any type of data...?

Categories

Resources