So I recently bought a Sprint Note 2 that was flashed to Ntelos. (dirt cheap). I was going to use it on Ntelos because thats my current carrier, but the person that had it Left it attached to his prepaid account. So now I need to bring it back to sprint and have no clue how to do so. Does anybody know or can tell me where to look? I'm running out patience looking for answers
I don't think you can. But the way I lost my flash was Odin back to stock. At least that worked on the s3
Sent from my SPH-L900 using XDA Premium 4 mobile app
c_elliott1983 said:
So I recently bought a Sprint Note 2 that was flashed to Ntelos. (dirt cheap). I was going to use it on Ntelos because thats my current carrier, but the person that had it Left it attached to his prepaid account. So now I need to bring it back to sprint and have no clue how to do so. Does anybody know or can tell me where to look? I'm running out patience looking for answers
Click to expand...
Click to collapse
Please pardon me if this sounds dumb, but I am a newbie... I too have a Sprint Note 2. It used to be flashed to boost mobile. Now it's been flashed back to stock sprint ROM using file links and instructions right here in these forums. From what I gather, you want to go back to sprint? It's really simple. You do have the original MEID & Id ETC. right? Should be behind the battery when you remove it. I have successfully got my phone back to STOCK Sprint. It's really easy to do using TWRP and stock Sprint ROM files and DFS (there are others)...But these were the ones (programs) I used.. Read and read some more. Be patient (easier said than done..lol) you'll get it...It CAN be done...
bepatientw/me said:
Please pardon me if this sounds dumb, but I am a newbie... I too have a Sprint Note 2. It used to be flashed to boost mobile. Now it's been flashed back to stock sprint ROM using file links and instructions right here in these forums. From what I gather, you want to go back to sprint? It's really simple. You do have the original MEID & Id ETC. right? Should be behind the battery when you remove it. I have successfully got my phone back to STOCK Sprint. It's really easy to do using TWRP and stock Sprint ROM files and DFS (there are others)...But these were the ones (programs) I used.. Read and read some more. Be patient (easier said than done..lol) you'll get it...It CAN be done...
Click to expand...
Click to collapse
I hope so. lol. The goofball that had it before me flashed it to ntelos and left it on the account not used, but still attached. Actually made it difficult to sell as a ntelos phone, but I have some time today to play around with it today. I was told by sprint it needs a flash back to sprint. Sad part I have no fricken clue who flashed it to begin with it that way
Well first check the sticker underneath the battery. Have you verified it can be brought back tp sprint? If its ok on sprints end using the numbers on the back then you can move further. Let us know so we can direct you.
sent from my Provari with a mini rda!
patrao_n said:
Well first check the sticker underneath the battery. Have you verified it can be brought back tp sprint? If its ok on sprints end using the numbers on the back then you can move further. Let us know so we can direct you.
sent from my Provari with a mini rda!
Click to expand...
Click to collapse
Everything is correct. It can be activated on sprint. Ive already checked that multiple times
Ok well now you need to write the info from the sticker to the phone. You can use cdma workshop or dfs. Either program will work. You can also look at guides made for boost mobile. You can follow the guide. Instead of a donor phone you use the sticker info. Instead of changing your mmsc to boost you would change it to sprints. Either way get your msl first just in case. Use msl reader from the playstore. If it cannot read it push home. Then go to your dialer and push in ##3282# it will ahow a screen saying view or edit. Push edit. Enter a random 6 digit code. It doesnt matter what it is. It will give an error. Push home and hold it until recent tasks come up. Go to msl reader again and read the code again. It should give it to you this time.
sent from my Provari with a mini rda!
patrao_n said:
Ok well now you need to write the info from the sticker to the phone. You can use cdma workshop or dfs. Either program will work. You can also look at guides made for boost mobile. You can follow the guide. Instead of a donor phone you use the sticker info. Instead of changing your mmsc to boost you would change it to sprints. Either way get your msl first just in case. Use msl reader from the playstore. If it cannot read it push home. Then go to your dialer and push in ##3282# it will ahow a screen saying view or edit. Push edit. Enter a random 6 digit code. It doesnt matter what it is. It will give an error. Push home and hold it until recent tasks come up. Go to msl reader again and read the code again. It should give it to you this time.
sent from my Provari with a mini rda!
Click to expand...
Click to collapse
Msl is "000000" I tried some today with no luck. Everything failed in odin. Now i'm searching again, because its either odin mode or "firmware encountered a issue. Recovery from kies and try again. But it doesnt connect to kies. Actually wount connect even before I got started.
Got the phone back on. Still on Ntelos, so now I'm back to searching on how to remove this carriers flash. Nothing I've tried has worked
Hey guys I've got a similar problem. I got a note 2 and I'm wanting to flash it to boost but I haven't been able to read the HA/AAA keys. I did a reset ##786# to remove the old sprint account and downgraded to the LJC radio but I still get the access denied error for Nv_read on 466 and 1192. Also if I call 611 I get Ntelos wireless customer service and I'm kinda lost on what to do.
I didnt feed anyone lies. I have seen it done before. On my last phone. The epic touch 4g. If it doesnt work on this phone then thats too bad. I have never needed to flash a phone to another carrier.
Sent from my SPH-L900 using Tapatalk 4
In all fairness I have flashed a E4GT to an MVNO and back.
Google Chris41g's Epic to Boost steps. Follow the steps in there to change back your MEID only.
Flash a stock rooted restore - in this case I'll suggest MC2 rooted restore. This sets proper CSC info.
Turn phone on and ##72786#. Let HFA go through its steps.
LTE I can't say anything on since E4GT didn't have it.
The reason I did this way is because HFA will pull the HA/AAA keys and set the profile back on its own.
You only have to do it manually when flashing to MVNO because you can't use HFA.
Sorry but that's all the details I can mention on this thread - PM with any additional questions.
Related
I picked up a used Evo 4G recently only to find the previous owner had it flashed to MetroPCS.
As far as I can tell I've got it all back on the Sprint network but still having some problems, example, it'll only call out or receive voicemail when roaming. I want to take it to the Sprint store but the banner says "MetroPCS".
I need to know exactly what the default Sprint banner says so I can fix it up before taking it in.
The device is showing my @sprintpcs email address, downloaded the latest PRL (60687).
I didn't know what the MSL was and didn't use cdma-workshop because on two different systems with two different antivirus software it came up as Malware. I set it to 000000 using a guide I found but could do with knowing what it should be. (Is the MSL unique to me as a customer, if so would I be able to find it from my Moment phone maybe?)
Anyway, the main thing is the banner. If I can set this then it'll be half the battle.
TIA.
P.S. Why wouldn't this be reset after a factor reset? Is there a code that will literally wipe everything or am I missing something that I need?
I think it didn't reset because its a radio thing, not software. Not the smartest on carrier flashing things though.
Sent from my PC36100 using XDA
http://themikmik.com/showthread.php?8477-Radio-Update-1-21-2012-2-15-00-12-19
Post 1 and use the 3rd download link for the PRI, baseband and WIMAX.
Flash it and see if that fixes the issue.
Thanks for the link. I have to leave in 10 minutes so I'm not going to have time. I have tried to get into recovery before (hold down volume while powering on) but it doesn't seem to work for me so I need to look around and see what I'm missing. If Sprint can't help then I'll give this a go.
They did tell me they had a service outage in this area so I'll try on my way home.
Thanks for the suggestions.
Make sure fastboot is off in settings, and once that is off, pull out battery and put back in then try again. Or get quickboot or something from the play store.
Sent from my PC36100 using XDA
Thanks for the posts. Sprint was saying that they couldn't get it to receive a signal so they'll just replace it for me. That $8 a month that I've been paying forever finally pays off!
If I odin my epic 4g back to stock, will I have to re flash/ reprogram it to get it to work with metro again. It was working fully flashed on metro but my service got deactivated.
xdanewbover9000 said:
If I odin my epic 4g back to stock, will I have to re flash/ reprogram it to get it to work with metro again. It was working fully flashed on metro but my service got deactivated.
Click to expand...
Click to collapse
More than likely, since Odin formats the partitions.
xdanewbover9000 said:
If I odin my epic 4g back to stock, will I have to re flash/ reprogram it to get it to work with metro again. It was working fully flashed on metro but my service got deactivated.
Click to expand...
Click to collapse
No you won't need to... I own a business unlocking phones... and u don't need to. Even though odin repartitions it does not mean it changes ur data plan. It just repatitions the phone. It will still stay on. Just reactivate your plan and your phone will work
treat ur girl like how u treat ur epic
certifiednoob93 said:
No you won't need to... I own a business unlocking phones... and u don't need to. Even though odin repartitions it does not mean it changes ur data plan. It just repatitions the phone. It will still stay on. Just reactivate your plan and your phone will work
treat ur girl like how u treat ur epic
Click to expand...
Click to collapse
Unless they use the Phone EFS Clear option in Odin.
ShinyDude100 goes into a little detail about that option's use in this post: http://forum.xda-developers.com/showpost.php?p=31140050&postcount=609
Thanks Nikon for acknowledging that, OP, cwm backup your MetroPCS rom, then have fun messing with your phone but don't lose that backup. There are fixes in mms and etc on other phones, a new one may have to be made to get all of your features working correctly. YMMV on metro's 3g working for you, as some cities claim 3g to be blocked in certain cities on flashed phones, I will dig deep into that issue eventually and post a guide sometime on regaining metro's 3g in cities who got blocked. I have a hunch on what could be blocked. Cheers and have fun.
Sent from my SPH-D700 using xda premium
nikon120 said:
Unless they use the Phone EFS Clear option in Odin.
ShinyDude100 goes into a little detail about that option's use in this post: http://forum.xda-developers.com/showpost.php?p=31140050&postcount=609
Click to expand...
Click to collapse
Question... why would you want to use the Phone EFS Clear option in Odin if you want to keep it on the same carrier. People should do their homework on Odin before using. And if anything CDMA Workshop. Connect port read change msn, meid, username, password then write 000000 to unlock. Go on ur epic and input in dialer *#*#8778#*#* or ##8778# go to edit enter 000000 then change everything from there that simple. Save then reboot. Call carrier and say u want to activate or just dial *228 or *#2284 whichever u find better. And there u go
treat ur girl like how u treat ur epic
certifiednoob93 said:
People should do their homework on ...
Click to expand...
Click to collapse
Everything after this quoted bit was a great knowledge dump. (No sarcasm, it was useful info.) However, what I quoted above was where you just expected way too much of majority of readers on XDA and many other popular Android forums. Sad, but true.
Nexus S 4g flashed to MetroPCS, but I cant activate
I bought a Nexus s 4g that had been previously flashed to Metro PCS. The person just removed their Metro account 5 days ago. When I called 611, it went to the Metro recording..but I tried to call to activate, and they said go to the corporate store to have it unlocked. So I went to the store, and the guy tried to activate it, and put a couple codes and was shaking his head. His advice, " Take this to a store that does flashing and have them do some programming so it can be activated." Do I have to have it re flashed? I sure hope not. Please help!
You should ask in the Nexus S forum.
Sent from my SPH-L710 using xda premium
Thanks for ask the advice guys, I odin'd back to ec05 and updated from there to fc09 and reactivated on metro, everything works fine now.
Sent from my SPH-D700 using xda app-developers app
Also I didn't have to do anything as far as re flashing, just called *228 and when through the steps
Sent from my SPH-D700 using xda app-developers app
I picked up an E4GT a couple weeks ago, had been just playing around with it, flashing a couple ROMs and such, so I decided to replace the phone I currently have on my plan (EVO 3D) with the E4GT. So I proceeded to installing a stock FH13 ROM on the phone and I unrooted it (just to be sure nothing would be getting in the way of activation). Now I've called to try and activate it twice (assuming the first time I called the person didn't know what he was talking about) and each time the codes that the Sprint representative gives me do not work.
The first code he gave me was ##725465#, and said to hit edit when I was taken to the next menu, however, this code did nothing for me.
Then he asked me to enter ##72786#, then to change the MSL, however, the codes he gave me to change the MSL continuously gave me the error "Invalid Lock Code"
Both times the person let me know that the phone had been "tampered" with and that in its current state, it could not be activated.
SO......what did I do wrong?? Do I need to be on a stock GB ROM?? I wouldn't think so, but am rather confused, as I'm sure there is a logical explanation for my issue. Or is it the phone? Has it been flashed for another carrier (Cricket, Boost)? I don't know, so I turn to y'all....gimme your input!
airswoosh1 said:
I picked up an E4GT a couple weeks ago, had been just playing around with it, flashing a couple ROMs and such, so I decided to replace the phone I currently have on my plan (EVO 3D) with the E4GT. So I proceeded to installing a stock FH13 ROM on the phone and I unrooted it (just to be sure nothing would be getting in the way of activation). Now I've called to try and activate it twice (assuming the first time I called the person didn't know what he was talking about) and each time the codes that the Sprint representative gives me do not work.
The first code he gave me was ##725465#, and said to hit edit when I was taken to the next menu, however, this code did nothing for me.
Then he asked me to enter ##72786#, then to change the MSL, however, the codes he gave me to change the MSL continuously gave me the error "Invalid Lock Code"
Both times the person let me know that the phone had been "tampered" with and that in its current state, it could not be activated.
SO......what did I do wrong?? Do I need to be on a stock GB ROM?? I wouldn't think so, but am rather confused, as I'm sure there is a logical explanation for my issue. Or is it the phone? Has it been flashed for another carrier (Cricket, Boost)? I don't know, so I turn to y'all....gimme your input!
Click to expand...
Click to collapse
so you never had the phone activated?
Why not Odin Stock EL29 http://forum.xda-developers.com/showthread.php?t=1433101.
This will take you to a stock (although rooted, but will not make a difference for OTA updates because of the stock kernel and other code)
Then try what they are asking.
Nope, I've never activated this phone myself.
Unless anyone has any other ideas, I'll probably trying the stock EL29 and see if that works
Did you buy it used?
Go online and try to activate it there
Sent from my SPH-D710 using xda app-developers app
airswoosh1 said:
Nope, I've never activated this phone myself.
Unless anyone has any other ideas, I'll probably trying the stock EL29 and see if that works
Click to expand...
Click to collapse
What ROM are you actually running? The dialer codes don't work on the CM or AOSP roms, at least not normally.
You need to be on a Touchwiz based ROM.
Sent from my SPH-D710 using XDA
You broke it.. ........no soup for you !
Pp.
Sent from my ginger infused Mayan calculator.
@ravaged: Yes, I bought it used.
@DaMan: I tried to activate it online, went through the process, it wouldn't take, and then was told to call technical support
@Dalmus: I am on a TouchWiz ROM, stock FH13
Sounds like someone may have flashed it to boost or USC. Therefore the esn won't match because the original is no longer there. You may want to check out some of the guides for flashing your phone to another carrier. I've never done it but maybe you can reverse the steps. You may need a sacrificial phone with a good esn to do it. Someone on one of those threads may be able to assist you more.
I went ahead and put in on the stock EL29 ROM, and the codes still don't work.
Yeah, that's what I was thinking might be the case....
Someone else broke it,. ..................... no soup for then!
Pp......
Sent from my ginger infused Mayan calculator.
So I've gone about google searching for flashing back to Sprint, most suggestions start with flashing a Sprint PRL and that seems to be the secret to everything....but when I enter the RTN service menu, I've found this phone already has a Sprint PRL. The MSL is 000000 which seems to mean that it was indeed flashed to another carrier, but I can't figure out how to get the original MSL back.
Not completely sure, but I think that number is under the battery with the serial number.
Nah....the MSL is a 6 digit number which I believe for this phone should be 725465, although I'm not exactly sure, but that's the number the Sprint representative gave me to enter originally....I dunno.....
I'm figuring there has to be a way to revert the MSL back to its original....just can't figure out how.....
Where did you buy it from?
Sent from my SPH-D710 using xda app-developers app
Deleted
ebay
I think I'm just gonna take it into Sprint on Monday and let them screw around with it and see what they say.
airswoosh1 said:
I'm figuring there has to be a way to revert the MSL back to its original....just can't figure out how.....
Click to expand...
Click to collapse
CDMA Workshop is used to do just that along with some other stuff. just google it and rewrite the orig MSL.
Also since it is 000000 someone changed it via CDMAWS sprint phones do not have orig msl as 000000.
If the DEC under the battery (orig) and in the MEID phone info (programed) dont match then the orig DEC esn could of been a bad esn (blacklisted) or it has been flashed to another carrier....boost..etc with the donor ESN.
What does terminal emulator say when you try getting your MSL that way?
Sent from my SPH-D710 using XDA
Before I describe my issue, I'd like to state that I have searched high and low for answer to no avail. I am using a Sprint Galaxy Note II that has been upgraded to 4.3 stock. It was unrooted when my issue began, but I went ahead and rooted it to try and help my problem.
Two days ago I signed up for Straight Talk Bring your own phone. I entered the provided code which took me to the hands free activation. The activation proceeded successfully (my phone said success) until it forced a prl update. It says it fails (each time it tries the prl update) and immediately reboots the phone. Once booted the activation attempts again and repeats over and over unless I cancel before it gets to the prl update. Strangely enough if I try to make a call it says my phone has not yet been activated, and yet a few times after waiting I can make calls (verified they are coming from my new number), but no data functions. If I then try and complete the activation (the incomplete notification remains), I'm back to square one.
Straight Talk techs have assured me that my phone is active throughout their system and the sprint towers are having no issues. They say other Note II's have been successful. My phone is communicating with the towers as I get the LTE icon during activation.
As an experiment I activated a Samsung Galaxy 3 (never rooted) using the same method and it went through fine. It updated the prl and is now working like a champ. I am now at wits end with my Note. I have faith that all would function if I could get the prl to update and I haven't a clue how to get there from here. I have also been unsuccessful obtaining my MSL even after rooting. A little history on the phone is that it was active with Sprint and it was rooted at 4.1. I returned it to stock to take the 4.3 update.
If anyone can help it would be greatly appreciated.
Sherryluv5 said:
Before I describe my issue, I'd like to state that I have search high and low for answer to no avail. I am using a Sprint Galaxy Note II that has been upgraded to 4.3 stock. It was unrooted when my issue began, but I went ahead and rooted it to try and help my problem.
Two days ago I signed up for Straight Talk Bring your own phone. I entered the provided code which took me to the hand free activation. The activation proceeded successfully until it forces a prl update. It says it fails and immediately reboots the phone. Once booted the activation attempts again and repeats over and over unless I cancel before it gets to the prl update. Strangely enough if I try to make a call it says my phone has not yet been activated, and yet a few times after waiting I can make calls (verified they are coming from my new number), but no data functions. If I then try and complete the activation (the incomplete notification remains), I'm back to square one.
Straight Talk techs have assured me that my phone is active throughout their system and the sprint towers are having no issues. They say other Note II's have been successful. My phone is communicating with the towers as I get the LTE icon during activation.
As an experiment I activated a Samsung Galaxy 3 (never rooted) using the same method and it went through fine. It updated the prl and is now working like a champ. I am now at wits end with my Note. I have faith that all would function if I could get the prl to update and I haven't a clue how to get there from here. I have also been unsuccessful obtaining my MSL even after rooting. A little history on the phone is that it was active with Sprint and it was rooted at 4.1. I returned it to stock to take the 4.3 update.
If anyone can help it would be greatly appreciated.
Click to expand...
Click to collapse
If it's active in their system and if their systems are compatible with your phone then you should be able to update the profile and PRL with no issues. Make sure you're connected to WiFi. There isn't much else you can do short of cloning another phones information onto it but then you won't get LTE. Are you sure it's active on their system and not still attached to Sprint?
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
ecs87 said:
If it's active in their system and if their systems are compatible with your phone then you should be able to update the profile and PRL with no issues. Make sure you're connected to WiFi. There isn't much else you can do short of cloning another phones information onto it but then you won't get LTE. Are you sure it's active on their system and not still attached to Sprint?
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
It is active in their system and unfortunately I don't have another phone to clone. My prl says 2010. It will not update over wifi or LTE. I've tried factory resets (before I rooted). I'm sure it's something with my phone. I just can't pinpoint it. The only progress I have made is that I did manage to extract my MSL. The reps at straight talk said my phone would use sprint towers to activate. Also I'm wondering it my note would use the same prl at the S3 I activated. Thanks so much for trying to help.
You can do *22804 and it should update the prl
Sent from my SPH-L900 using XDA Premium 4 mobile app
Although I may be completely wrong here, I can only go off of experience saying I haven't had a problem updating the profile and PRL or getting service from a "flashed to" carrier, by replacing the original carriers settings. I've tried NUMEROUS Sprint and Boost Mobile PRLs on my phones (I've had a EVO 4G, S2, Nexus, EVO LTE, and Note 2 on Boost...yeah I change phones a lot) and never had an issue getting Boost Mobile service since they use Sprint's towers.
First off, is the Note 2 still active on Sprint? CALL Sprint and verify this. I know if I try to activate a Verizon iPhone 4 on Page Plus that it'll default to Verizon OTA programming and pull that data when I WANT it to pull PP's OTA data via *228 (or *22890). Same thing may be applied here (except with update profile instead of *228). Secondly, is the phone's MEID the same as what you registered on the account? Although I think the L900 is set to show the OEM MEID in settings, I've seen some US Cellular (and maybe Verizon) phones that have shown the OEM MEID in settings but when hooked up in diag mode through the computer showed the real MEID which was completely different. Just something else to consider to make sure you cover everything!
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
ecs87 said:
Although I may be completely wrong here, I can only go off of experience saying I haven't had a problem updating the profile and PRL or getting service from a "flashed to" carrier, by replacing the original carriers settings. I've tried NUMEROUS Sprint and Boost Mobile PRLs on my phones (I've had a EVO 4G, S2, Nexus, EVO LTE, and Note 2 on Boost...yeah I change phones a lot) and never had an issue getting Boost Mobile service since they use Sprint's towers.
First off, is the Note 2 still active on Sprint? CALL Sprint and verify this. I know if I try to activate a Verizon iPhone 4 on Page Plus that it'll default to Verizon OTA programming and pull that data when I WANT it to pull PP's OTA data via *228 (or *22890). Same thing may be applied here (except with update profile instead of *228). Secondly, is the phone's MEID the same as what you registered on the account? Although I think the L900 is set to show the OEM MEID in settings, I've seen some US Cellular (and maybe Verizon) phones that have shown the OEM MEID in settings but when hooked up in diag mode through the computer showed the real MEID which was completely different. Just something else to consider to make sure you cover everything!
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
I tried and it said the number or code is invalid. I will try again when I have a stronger signal. Uploading screenshot of phone connection specs. They look abnormal, but I am not an expert. I am running sprint stock 4.3 rom that was updated with kies. It is rooted but only after issue started happening. The phone number shown is not a number that I have ever had with Spring of Straight Talk
Sherryluv5 said:
I tried and it said the number or code is invalid. I will try again when I have a stronger signal. Uploading screenshot of phone connection specs. They look abnormal, but I am not an expert. I am running sprint stock 4.3 rom that was updated with kies. It is rooted but only after issue started happening. The phone number shown is not a number that I have ever had with Spring of Straight Talk
Click to expand...
Click to collapse
MMM I think I know what's going on here. You need to change your MDN and MIN to something other than 000000xxxx. I think that's forcing a HFA loop every time you boot the phone. Are you familiar with CDMA workshop or DFS CDMA tool? You'll need one of these to possibly fix your problem. Essentially, i think your phone needs to update the profile. This wouldn't be a big issue but I think HFA is strictly sprint and update profile won't work until you get rid of the HFA nag without disabling SprintDM. Check out the two programs I mentioned.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
ecs87 said:
MMM I think I know what's going on here. You need to change your MDN and MIN to something other than 000000xxxx. I think that's forcing a HFA loop every time you boot the phone. Are you familiar with CDMA workshop or DFS CDMA tool? You'll need one of these to possibly fix your problem. Essentially, i think your phone needs to update the profile. This wouldn't be a big issue but I think HFA is strictly sprint and update profile won't work until you get rid of the HFA nag without disabling SprintDM. Check out the two programs I mentioned.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
This might just work. I have CDMA workshop demo version but am unsure how to conduct the procedure. I really need to get it fixed because now hubby is in the hospital and has the s3. This is my only means of communicating with him when I'm not there. Wish I had the funds to just buy a note 2 that is unlocked but that is not an option right now.
Sherryluv5 said:
This might just work. I have CDMA workshop demo version but am unsure how to conduct the procedure. I really need to get it fixed because now hubby is in the hospital and has the s3. This is my only means of communicating with him when I'm not there. Wish I had the funds to just buy a note 2 that is unlocked but that is not an option right now.
Click to expand...
Click to collapse
If you're on a CDMA network, meaning your carrier didn't give you a SIM card, then having an unlocked phone does nothing for you. Straight talk might be CDMA and GSM though, never looked too much into it. Anyway, you're going to need to dial ##DIAG# in your dialer to bring up the "port" menu. Leave it on PDA and select Qualcomm USB settings or something along those lines. You should be at MTP. Switch it to DM+Modem+ADB. Plug your device into your computer. In device manager you should be able to see which port your computer assigned to it. If you have to, change the port number to be COM25 or under. Go into CDMA WS, connect to the port, send the password: 2012112120131219 and your SPC. Go to NAM1 and read. You should see your MDN and MIN are kind of zeroed out. Replace them with something other than zeros, like MDN: 7737777777 MIN: 3122222222. Reboot your phone. HFA nag should've gone away (if you're on 4.3). Now you should be able to update your profile WITHOUT having to go through Sprint's HFA, and after it grabs everything it needs, you should be on Straight Talk.
ecs87 said:
If you're on a CDMA network, meaning your carrier didn't give you a SIM card, then having an unlocked phone does nothing for you. Straight talk might be CDMA and GSM though, never looked too much into it. Anyway, you're going to need to dial ##DIAG# in your dialer to bring up the "port" menu. Leave it on PDA and select Qualcomm USB settings or something along those lines. You should be at MTP. Switch it to DM+Modem+ADB. Plug your device into your computer. In device manager you should be able to see which port your computer assigned to it. If you have to, change the port number to be COM25 or under. Go into CDMA WS, connect to the port, send the password: 2012112120131219 and your SPC. Go to NAM1 and read. You should see your MDN and MIN are kind of zeroed out. Replace them with something other than zeros, like MDN: 7737777777 MIN: 3122222222. Reboot your phone. HFA nag should've gone away (if you're on 4.3). Now you should be able to update your profile WITHOUT having to go through Sprint's HFA, and after it grabs everything it needs, you should be on Straight Talk.
Click to expand...
Click to collapse
Tried the above but got lost on MIN. (is this the same as MSID?). Didn't find MIN anywhere. This is what I did try and it may have worked..so far, so good. I changed my number via the Straight Talk automated. I then tried the HFA which failed again, so I went in and maually programmed my username, MDN and MSID. I then tried mms and making calls and it worked. I then used root explorer to get rid of HFA by deleting the Sprint update apk. The prl 2010 remained and Sprint Zone says it is current. My only issue is that internet does not work though mms does. That is an issue I am now going to try and tackle. For the record, internet also does not work on the S3 that completed the HFA and prl update successfully. If anyone has any ideas on how to fix that I am open for suggestions. Thanks for your help on this. Please see screenshots..
Yes MIN is the same as MSID. You needed to program the numbers through a CDMA flashing program to get rid of the HFA nag. Now that you've programmed them through the phone...I'm not too sure how you're going to deal with the HFA. Yes, you disabled it, but you also disabled the ability to update the profile which is what you need to do for your data to work...
Success!
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.
Sherryluv5 said:
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.
Click to expand...
Click to collapse
Having the same problem too. Where did you find the old Sprint PRL file? Thanks
Thanks for the info but...
Sherryluv5 said:
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.
Click to expand...
Click to collapse
Im happy this worked for you. I believe you have to have an older Android OS to make the trick work. My question is, how can we make this work with a 4.4.2 OS? Much thanks in advance.
BuzzERKINdff said:
Having the same problem too. Where did you find the old Sprint PRL file? Thanks
Click to expand...
Click to collapse
Also would like to know thanks
donclark said:
Im happy this worked for you. I believe you have to have an older Android OS to make the trick work. My question is, how can we make this work with a 4.4.2 OS? Much thanks in advance.
Click to expand...
Click to collapse
My community rom (4.4.2 tw) has the ability to write prl via ##data# then view knot edit).
Sent from my SPH-L900 using XDA Premium 4 mobile app
Samsung Galaxy S3 (L710)
On both of my L710 (S3), the write PRL option was not showing. So ##data# didnt work for me. I had to install this app:
https://www.dropbox.com/s/32jc7i0w2fa2oxw/PRLWUnhide_S3_MA6.zip/
This made it so I was able to see that function.
Here are a bunch of PRL files. I believe the latest is 25018. If its not listed there, just do a search for the zip file:
http://forum.xda-developers.com/showthread.php?p=35576100
I was able to update the Profile and PRL after writing the TEST.prl file.
However, that didnt seem to solve my problem.
No 3g/4g, with HFA loop, with FreedomPOP as my provider (SPRINT MVNO).
I get a "unable to establish a data connection" error MIP:67 on one of the phones when trying to activate.
On the other phone, I get the notice to call customer care (SPRINT).
I believe this to be an ICCID issue, but I cannot confirm this:
https://community.sprint.com/baw/thread/143514
Pull up your dialer, punch in ##72786#. Let the phone go through its little process, then try to update prl and profile.
I am currently using a sprint note 2 on straight talk, had the same issue, and that's what I did to fix it.
Sprint Galaxy Note 2 SPH-L900 (how do I reinstall Sprint PRLs&get rid of Page Plus)
I bought a Sprint Galaxy Note 2 SPH-L900 not too long ago on Craigslist. Guy told me it worked with Sprint but he apparently flashed it to something that used Verizon PRLs (from what i've been told probably Page Plus). I recently tried to use Ringplus/Sprint with this phone but couldn't use it due to the PRL problem. When I try to make a call a robo Verizon operator pops up and I can't make calls. Of course, I can't get in contact with the guy that sold me the phone so im hoping you guys can help me get it to work with Sprint.
The MSL number has been changed to all zeros. And the dial code ##72786# shows "SCRTN" at the very top then just restarts my phone.
So I rooted the phone using this simple process. [SPH-L900] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1956180
Then I downloaded SuperSU. Then tried DFS to change my MSL number back to the original number. But it didn't work. I tried PRL Helper, but that too did not work. Won't let me reset the PRL. So I unrooted my phone (or so I thought) and reset the phone to factory to see if that would work, and it did not. So I reinstalled the CF-Auto-Root and now even SuperSU won't work. Im new to all this rooting stuff. THIS IS FRUSTRATING!
My phone is running stock rom. Android version 4.4.2 Baseband version L900VPUCOH3. Build number KOT49H.L900VPUCOH3.
PLEASE HELP!
I'm not sure of all the prl changes and how all that works. That said I would use odin to revert to a stock unrooted ROM and try to reactivate sprint via settings prl updates ect.
Edit: here's a link to stock ROM for Odin. Hope it helps http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
I'm not sure of all the prl changes and how all that works. That said I would use odin to revert to a stock unrooted ROM and try to reactivate sprint via settings prl updates ect.
Edit: here's a link to stock ROM for Odin. Hope it helps http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for the help. I followed the instructions in the link and it didn't help at all. I still get a Verizon operator when I try to make calls and when I enter in try the carrier reset dial code ##72786# ,it shows "SCRTN" at the very top then just restarts my phone. There has got to be a way to fix this...
Sounds like you need to Google how to flash your phone to whatever carrier you are wanting to get on. I myself am on boost mobile.
Sent from my SPH-L900 using XDA-Developers mobile app
Chunli'sThighs said:
Thanks for the help. I followed the instructions in the link and it didn't help at all. I still get a Verizon operator when I try to make calls and when I enter in try the carrier reset dial code ##72786# ,it shows "SCRTN" at the very top then just restarts my phone. There has got to be a way to fix this...
Click to expand...
Click to collapse
Did you call sprint and complain I had it happen one time and I sat on the phone and got transferred three times and then something they did had me back to normal.
Sent from my SPH-L900 using XDA-Developers mobile app
skryte said:
Sounds like you need to Google how to flash your phone to whatever carrier you are wanting to get on. I myself am on boost mobile.
Sent from my SPH-L900
Click to expand...
Click to collapse
Thanks. But thats what i've been doing. Im trying to get my phone to work with Ringplus(they use Sprint towers). I've been using cdma workshop to try resolve the issue but nothing has been working. I know that I need to revert my phone back to Sprint to be able to use Ringplus. Info on how to go from Page Plus to Sprint is very limited.
beansnorice said:
Did you call sprint and complain I had it happen one time and I sat on the phone and got transferred three times and then something they did had me back to normal.
Sent from my SPH-L900
Click to expand...
Click to collapse
Thanks for responding. This is actually one of the first things I did and I also kept getting transferred to different people. What specifically did you ask the Sprint people for them to do what they did?
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
skryte said:
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
Click to expand...
Click to collapse
How would I clone another phone? And in order to do this right, would I have to clone another SPH-L900?
skryte said:
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
Click to expand...
Click to collapse
Why boost allows most non prepaid sprint phones on are allowed on boost? http://www.prepaidphonenews.com/2015/06/list-of-sprint-phones-allowed-on-boost.html?m=1
Sent from my SPH-L900 using XDA-Developers mobile app
---------- Post added at 01:11 AM ---------- Previous post was at 01:10 AM ----------
Chunli'sThighs said:
Thanks. But thats what i've been doing. Im trying to get my phone to work with Ringplus(they use Sprint towers). I've been using cdma workshop to try resolve the issue but nothing has been working. I know that I need to revert my phone back to Sprint to be able to use Ringplus. Info on how to go from Page Plus to Sprint is very limited.
Thanks for responding. This is actually one of the first things I did and I also kept getting transferred to different people. What specifically did you ask the Sprint people for them to do what they did?
Click to expand...
Click to collapse
Just noticed you want to goto page plus that's a whole different ballgame. I'm sorry I couldn't be more help
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
Just noticed you want to goto page plus that's a whole different ballgame. I'm sorry I couldn't be more help
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for the late response and thanks for the reply but I was trying to go to RingPlus not PagePlus.
Problem Solved!
Forgot to update. I fixed this problem.
How I FIXED Ringplus PRL problem (flashing to stock rom may or may not be necessary)
I fixed the problem by rooting my Galaxy Note 2 SPH-L900 with odin here.
[SPH-L900] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1956180
The reverted to 4.2 Kit Kat stock rom using "ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship.tar.md5" file.
https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Then I downloaded the "25xxx = residential acct - lte/800smr" PRL files from
http://*******************eestat.ir/?index=forum.xda-developers.com/showthread.php?t=1880781 (Add '?http://?xda-d?evelopers.freestat' to the beginning of link without the '?' marks.)
and extracting the "25XXX_LEG" folder then using the "25016.prl" file to desktop then using CDMA Workshop 2.7 to change the prl to the 25016 prl file.
Then I used trial version of DFS 16.2.21.0 to change my HEX and DEC and esn numbers to match what was on originally on the phone (I found this out through either Ringplus or going into phone dial code). It was a little difficult to change them because DFS kept saying it was skipping the request but after a little while even though it said it didn't change anything it did change it back to the original. That allowed my phone to be read by Ringplus and I was able to get the phone activated and PRLs updated automatically.