odin question - Epic 4G Q&A, Help & Troubleshooting

If I odin my epic 4g back to stock, will I have to re flash/ reprogram it to get it to work with metro again. It was working fully flashed on metro but my service got deactivated.

xdanewbover9000 said:
If I odin my epic 4g back to stock, will I have to re flash/ reprogram it to get it to work with metro again. It was working fully flashed on metro but my service got deactivated.
Click to expand...
Click to collapse
More than likely, since Odin formats the partitions.

xdanewbover9000 said:
If I odin my epic 4g back to stock, will I have to re flash/ reprogram it to get it to work with metro again. It was working fully flashed on metro but my service got deactivated.
Click to expand...
Click to collapse
No you won't need to... I own a business unlocking phones... and u don't need to. Even though odin repartitions it does not mean it changes ur data plan. It just repatitions the phone. It will still stay on. Just reactivate your plan and your phone will work
treat ur girl like how u treat ur epic

certifiednoob93 said:
No you won't need to... I own a business unlocking phones... and u don't need to. Even though odin repartitions it does not mean it changes ur data plan. It just repatitions the phone. It will still stay on. Just reactivate your plan and your phone will work
treat ur girl like how u treat ur epic
Click to expand...
Click to collapse
Unless they use the Phone EFS Clear option in Odin.
ShinyDude100 goes into a little detail about that option's use in this post: http://forum.xda-developers.com/showpost.php?p=31140050&postcount=609

Thanks Nikon for acknowledging that, OP, cwm backup your MetroPCS rom, then have fun messing with your phone but don't lose that backup. There are fixes in mms and etc on other phones, a new one may have to be made to get all of your features working correctly. YMMV on metro's 3g working for you, as some cities claim 3g to be blocked in certain cities on flashed phones, I will dig deep into that issue eventually and post a guide sometime on regaining metro's 3g in cities who got blocked. I have a hunch on what could be blocked. Cheers and have fun.
Sent from my SPH-D700 using xda premium

nikon120 said:
Unless they use the Phone EFS Clear option in Odin.
ShinyDude100 goes into a little detail about that option's use in this post: http://forum.xda-developers.com/showpost.php?p=31140050&postcount=609
Click to expand...
Click to collapse
Question... why would you want to use the Phone EFS Clear option in Odin if you want to keep it on the same carrier. People should do their homework on Odin before using. And if anything CDMA Workshop. Connect port read change msn, meid, username, password then write 000000 to unlock. Go on ur epic and input in dialer *#*#8778#*#* or ##8778# go to edit enter 000000 then change everything from there that simple. Save then reboot. Call carrier and say u want to activate or just dial *228 or *#2284 whichever u find better. And there u go
treat ur girl like how u treat ur epic

certifiednoob93 said:
People should do their homework on ...
Click to expand...
Click to collapse
Everything after this quoted bit was a great knowledge dump. (No sarcasm, it was useful info.) However, what I quoted above was where you just expected way too much of majority of readers on XDA and many other popular Android forums. Sad, but true.

Nexus S 4g flashed to MetroPCS, but I cant activate
I bought a Nexus s 4g that had been previously flashed to Metro PCS. The person just removed their Metro account 5 days ago. When I called 611, it went to the Metro recording..but I tried to call to activate, and they said go to the corporate store to have it unlocked. So I went to the store, and the guy tried to activate it, and put a couple codes and was shaking his head. His advice, " Take this to a store that does flashing and have them do some programming so it can be activated." Do I have to have it re flashed? I sure hope not. Please help!

You should ask in the Nexus S forum.
Sent from my SPH-L710 using xda premium

Thanks for ask the advice guys, I odin'd back to ec05 and updated from there to fc09 and reactivated on metro, everything works fine now.
Sent from my SPH-D700 using xda app-developers app

Also I didn't have to do anything as far as re flashing, just called *228 and when through the steps
Sent from my SPH-D700 using xda app-developers app

Related

Keep MetroPCS Data Settings?

I want to upgrade to the latest roms that have EC05 but in doing so, it will screw up my Metro PCS settings, rendering all my Epic's features useless. Anyone else on the same boat?
Sorry on a boat to no where with my Sprint Epic
Sent from my SPH-D700 using XDA Premium App
Bumping this thread.
What settings specifically are you concerned about?
Sent from my SPH-D700 using XDA App
The Programming Settings that keep My Epic 4G working with Metro PCS.
I guess he is concerned about data and mms for starters.
Sent from my SPH-D700 using XDA Premium App
I'm definitely on the same boat. I got my phone fully flashed with web and mms working but my build number is Samsung Eclair.DG27! Android 2.1-update1 smh.
Curious about this as well
Sent from my SPH-D700 using XDA App
nice to hear I'm not the only one now, too bad nobody has any suggestions..
All my data settings stay the same after flashing even with odin
But are you on an Epic that was custom rom flashed with Metro PCS?
Shinydude100 said:
But are you on an Epic that was custom rom flashed with Metro PCS?
Click to expand...
Click to collapse
No im not on metro but its the same concept..... I have major data changes and I've used odin many times and flashed many roms and none of those changes mentioned back to default.... Idk what metro data settings would have to do with going back to default......
Well, the "default" settings are programmed to be a SPRINT phone, with Sprint service. MetroPCS is a prepaid service. The Epic 4G was never meant to work with Metro.. so it had to of course firstly have the ESN# on their systems, and from there, it had to be programmed to work like their phone, otherwise, you won't even get a dial-tone. Its not mission impossible, but an Odin doest keep its Metro Settings, I've Odin'd, upgraded to Froyo, and then Nandroid Restored back to my Custom Rom with Metro Service.
Revival of the past
I know I'm ressurrecting an old thread, but I'd like all users of the Epic Community who are on a custom MetroPCS rom to know the following.
Once you go out of the custom rom you paid for, you sacrifice 3g service, internet/mms.
So unless you're roaming like me, i dont reccommend it. Also, as the duce said, your data programmed settings stay retained.
For the most part, if with metropcs, talk and text.
Make sure you Nand Backup your MetroPCS rom and keep that rom backed up and save somewhere besides your phone if you want to go around experimenting on other roms.
As for re-programming your basic talk/text, you'll need to unlock your epic if not unlocked, then cdma or qpst into your device, and use the lastest evdo metro prl you find and flash that.
after that you'll also need to get on the phone with MetroPCS activation support and have them provide you with the MSID (Min) number unless you already know it, so you can enter that in #000000# (or ##MSL#) terminal mode, and it'll ask for your phone number, hit enter, then on MSID enter the appropriate MIN. and there you go, talk/text will be restored in case you really need to reprogram it.
Shinydude100 said:
I know I'm ressurrecting an old thread, but I'd like all users of the Epic Community who are on a custom MetroPCS rom to know the following.
Once you go out of the custom rom you paid for, you sacrifice 3g service, internet/mms.
So unless you're roaming like me, i dont reccommend it. Also, as the duce said, your data programmed settings stay retained.
For the most part, if with metropcs, talk and text.
Make sure you Nand Backup your MetroPCS rom and keep that rom backed up and save somewhere besides your phone if you want to go around experimenting on other roms.
As for re-programming your basic talk/text, you'll need to unlock your epic if not unlocked, then cdma or qpst into your device, and use the lastest evdo metro prl you find and flash that.
after that you'll also need to get on the phone with MetroPCS activation support and have them provide you with the MSID (Min) number unless you already know it, so you can enter that in #000000# (or ##MSL#) terminal mode, and it'll ask for your phone number, hit enter, then on MSID enter the appropriate MIN. and there you go, talk/text will be restored in case you really need to reprogram it.
Click to expand...
Click to collapse
How would I go about getting a custom rom for metro pcs?
Sent from my SPH-D700 using Tapatalk
flastnoles11 said:
How would I go about getting a custom rom for metro pcs?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
The only place I knew of was in Dallas, TX. They charge 75 bucks, If only I wasn't foolish enough to delete my rom, I could of distributed it on the XDA forums. =(
They have the Ad on craigslist, I do believe they let you ship the phone to them, but I'm not sure, that'd be at their discretion if they do that. I had found it via craigslist, so try searching there under "flash metropcs" call up those ads, and see if they can properly flash an up to date rom with everything working.
Sent from my SPH-D700 using XDA App
Keep MetroPCS Data Settings? Of course its possible
Man, how much are they paying you to spout this crap? With the correct settings you can get all 3g, internet, mms, google play store and all features (except maybe 4g depending on the provider you switch from). You come pretty close to trolling when you tow the company line like that and tell users that they can't do something when they can. I'd be careful about spreading misinformation if I were you. I've modded several phones on metropcs and gotten great results.
Shinydude100 said:
I know I'm ressurrecting an old thread, but I'd like all users of the Epic Community who are on a custom MetroPCS rom to know the following.
Once you go out of the custom rom you paid for, you sacrifice 3g service, internet/mms.
So unless you're roaming like me, i dont reccommend it. Also, as the duce said, your data programmed settings stay retained.
For the most part, if with metropcs, talk and text.
Make sure you Nand Backup your MetroPCS rom and keep that rom backed up and save somewhere besides your phone if you want to go around experimenting on other roms.
As for re-programming your basic talk/text, you'll need to unlock your epic if not unlocked, then cdma or qpst into your device, and use the lastest evdo metro prl you find and flash that.
after that you'll also need to get on the phone with MetroPCS activation support and have them provide you with the MSID (Min) number unless you already know it, so you can enter that in #000000# (or ##MSL#) terminal mode, and it'll ask for your phone number, hit enter, then on MSID enter the appropriate MIN. and there you go, talk/text will be restored in case you really need to reprogram it.
Click to expand...
Click to collapse

[Q] 3G not working

Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
ankurcshah said:
I guess i went into ##DATA# and messed something without my knowledge.
Click to expand...
Click to collapse
You "guess" you messed around with something???
Call Sprint
Sent From My Galaxy10. 1 Class Starship...
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Flashing stock ROM wont reset those settings. You will need to reset the activation on a stock ROM. I'm not sure of the code for that but its been in the treads a few times....
Which would be ##786#.....
Still no avail brother!
ankurcshah said:
I am actually from India! Using it on a indian service provider. About the guess yeah, I dont remember actually if i changed anything. I even flashed the phone to stock/custom rom. No use
Click to expand...
Click to collapse
Is this device compatible with the 3g service your provider uses?
Yes it is. I have been using for quite a some time now.
Having the exact same issue. Not sure what caused it or how to fix it. I too am on stock rom
ankurcshah said:
Yes it is. I have been using for quite a some time now.
Click to expand...
Click to collapse
Have you contacted your cellular provider? If you changed some settings, most likely calling your provider to get the right settings will be your best course of action.
Sent From My Galaxy10. 1 Class Starship...
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Any help?
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
brooksyx said:
We are probably going to need a little more info than that if you want help...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
ankurcshah said:
Alright,so over here in india we use nvitems (dump files) for evdo Else known as 3G. I tried everything but it doesnt seem to go back. Any way to make a phone go back TOTALLY to its 1st stage? When it came out when it was shipped? As in the whole parameters to be new. I tried flashing new parameters,prl, No avail. Just cannot see the 3g logo.
Click to expand...
Click to collapse
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
ankurcshah said:
Hey guys I dont see the 3g signal on my phone. I guess i went into ##DATA# and messed something without my knowledge. Now the 3g symbol does not at all come up whatsoever. Advice appreciated. Thanx a lot.!
Click to expand...
Click to collapse
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Questions:
1. If not how did you get it setup to see their towers???
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
3. If they did, do you still have them and have you tried that???
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
Sent From My Galaxy10. 1 Class Starship...
SouthPhilly said:
Agreed... ankurcshah you've given us very little to go on here. You have to remember that the ET4G your using is mainly a US/Sprint base device.
Have you rooted, installed a rom/moden... Help us out some so we can help you out.
Yes,currently on el29 one click. but stock kernel without cwm
As far as I know and someone else has already posted this... You can do a factory reset to bring the os back to a "out of box" state. But this in no way will effect, change or the dialer or radios. Those settings are set by the carriers.
Could you link me?
Again, this is your original post. In it you clearly state that you "guess" you did the "##DATA# dialer code and" messed something with out my knowledge".
After rereading your original post again I'm thinking it really should have read this way...
"I went into ##DATA# and messed with some of the settings and didn't really know what I was changing." See the difference???
Those setting in "##DATA# or set by the carriers... They are there to tell the radios on your device how to communicate with and what frequency to use for the towers your cellular providers uses.
I'm going to assume that when you got your ET4G you had to contact your cellular provider to get it setup to use their service, right???
Nope, I just needed the dump file for the 3g to work, 3g works on my dad's phone and it doesnt on mine. I use the same dump as his. Still? Wierd
Questions:
1. If not how did you get it setup to see their towers???
I just flashed a prl
2. Did they (provider) give you some kind of codes to enter in the ##DATA# settings???
nope, I had set the msl to 000000
3. If they did, do you still have them and have you tried that???
They are not aware of such a thing also.
I've said this before... I really think you need to contact your provider and see if maybe they can re provision your radios.
I tired they don't understand "reprovision radios"
Sent From My Galaxy10. 1 Class Starship...
Click to expand...
Click to collapse
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
ankurcshah said:
As you were saying about the out of box state? Could you elaborate a bit more on that. I just need to reset the data settings of the phone to the state in which the phone had come. In the sense as in out of box.
Answers are in bold.
Thanx for your help
Click to expand...
Click to collapse
The reset I mentioned is a "factory reset" ... But like I already posted... It will only delete all of your user data and reset settings like wifi, email passwords...
It won't reset the radios...
If you had already flashed these files to get your phone working when you got it, Don't you still have them???
Sent From My Galaxy Class Star Fighter...
My 2 cents here, not completely sure but I saw this today.
Know your msl
>go to phone enter ##data#
>Click edit
>Then enter msl
>click other
>go into Korea mode
>click on India mode, press okay.
>reboot
Sent from my SPH-D710 using Tapatalk 2
Tried out! No changes takes place. Gonna take the qcn of a friends write it onto my phone,change imsi,meid,mdn and check.
Sent from my SPH-D710 using Tapatalk 2
Were u mentioning the one click thingys? Yes i have tried out every damn thing now.
Now on ics still no 3G
Sent from my SPH-D710 using Tapatalk 2
The one click restore files are for Sprint phones so I doubt if they would work for you
Hmmm,all right
Sent from my SPH-D710 using Tapatalk 2

My phone only roams... won't connect to Sprint

Even in places where I normally get a very strong 3G SPRINT signal, my phone will roam. Just started today after I flashed DeviantXone ROM with 3.4 Linux Kernel (test build from yesterday). Anyone have any suggestions to fix this issue? Thanks a lot.
Try restoring a nandroid, backing up your IMEI (http://forum.xda-developers.com/showthread.php?p=30682712) and then reflashing your ROM. The back up may not be needed as sometime the problem fixes itself. It's happened to me a few times and tends to happen upon first flashing a ROM but usually when I reflash all is good. However it is a good practice to have your IMEI backed up in case this happens.
sevenpioverthree said:
Try restoring a nandroid, backing up your IMEI (http://forum.xda-developers.com/showthread.php?p=30682712) and then reflashing your ROM. The back up may not be needed as sometime the problem fixes itself. It's happened to me a few times and tends to happen upon first flashing a ROM but usually when I reflash all is good. However it is a good practice to have your IMEI backed up in case this happens.
Click to expand...
Click to collapse
I have a nandroid my old ROM (Liquid Smooth); so I should first backup my current ROM (DeviantXone), then restore Liquid Smooth, backup my IMEI, then restore DeviantXone, then restore my IMEI.... correct?? How do I backup my IMEI and how do I get to it to restore it? Thanks!
Joe0113 said:
I have a nandroid my old ROM (Liquid Smooth); so I should first backup my current ROM (DeviantXone), then restore Liquid Smooth, backup my IMEI, then restore DeviantXone, then restore my IMEI.... correct?? How do I backup my IMEI and how do I get to it to restore it? Thanks!
Click to expand...
Click to collapse
That should work, and just follow the steps listed in that thread on backing up your IMEI. You have to use adb, if you don't know how to use adb, go to the Q&A thread on this subforum and read the ADB workshop thread.
sevenpioverthree said:
That should work, and just follow the steps listed in that thread on backing up your IMEI. You have to use adb, if you don't know how to use adb, go to the Q&A thread on this subforum and read the ADB workshop thread.
Click to expand...
Click to collapse
Damn that seems complicated lol... I'm at school now, guess I'll have to wait till I get home to try this.
Ok so I restored my nandroid (on it now) and it's still roaming... So does that mean my IMEI is totally screwed?? What do I do from here..
Sent from my SPH-L710 using xda app-developers app
Ok nvm now it's on the Sprint network.
Sent from my SPH-L710 using xda app-developers app
Joe0113 said:
Ok nvm now it's on the Sprint network.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
What did you do? I have tried about 6 different Roms, multiple flashes of the same roms, different kernels and no matter what I do I can't connect to sprint... Let me give you a background... I had CMW installed andI flashed hyperdrive. At first it booted fine and everything looked good but after a reboot the phone would just boot loop. So I reflashed it with a different kernel but this time no network, and I flashed almost any rom I could get my hands on from AOSP to the other samsung ones.... Please anything to help??
joshuadjohnson22 said:
What did you do? I have tried about 6 different Roms, multiple flashes of the same roms, different kernels and no matter what I do I can't connect to sprint... Let me give you a background... I had CMW installed andI flashed hyperdrive. At first it booted fine and everything looked good but after a reboot the phone would just boot loop. So I reflashed it with a different kernel but this time no network, and I flashed almost any rom I could get my hands on from AOSP to the other samsung ones.... Please anything to help??
Click to expand...
Click to collapse
I just nandroid back to Liquid Smooth (was on DeviantXone prior) and let the phone settle in for about 5min and BAM it connected to Sprint's network. Then I re-flashed DeviantXone once I got home and all was good! Didn't even have to do all the steps that "sevenpioverthree" posted.
Joe0113 said:
I just nandroid back to Liquid Smooth (was on DeviantXone prior) and let the phone settle in for about 5min and BAM it connected to Sprint's network. Then I re-flashed DeviantXone once I got home and all was good! Didn't even have to do all the steps that "sevenpioverthree" posted.
Click to expand...
Click to collapse
This may have worked but you really should read up on backing up your IMEI, it has saved many people and if you know how to use ADB, which you should learn how eventually as it is a powerful tool, it's actually really simple.
The fact is that what you did was restore to a time when your IMEI was in a good state but in the case that all is lost and you have to revert to stock using the Odin method, then having your IMEI backed up is a good thing and again it only takes a second to do and stays on your phone between ROMs
what to do now?
I'm having the same problem except my imei isn't gone. When i go to my about phone it says my phone number is 000-000-0016, my min is 0000000016. Service state: no service, mobile network type: UNKNOWN:0 I've flashed every ROM , kernel, and modem combo possible and nothing changes this?
There's a dial / programming code you can use to reactivate your phone (make sure you're on wife and stock rom)
Also try updating prl and profile
CNexus said:
There's a dial / programming code you can use to reactivate your phone (make sure you're on wife and stock rom)
Also try updating prl and profile
Click to expand...
Click to collapse
To update my Prl and profile i have to be on a stock ROM as well right? Also I'm on a sprint phone flashed to metro, how is it going to affect that? Besides the obvious of having to re root and flash.
I'm on Sprint my phone roams no matter what ROM I use .....its just Sprint service ...nothing to do with the ROMs..just something you have to deal with ...that's why they have unlimited roaming.....
Sent from my SPH-L710 using xda app-developers app
Durch said:
I'm on Sprint my phone roams no matter what ROM I use .....its just Sprint service ...nothing to do with the ROMs..just something you have to deal with ...that's why they have unlimited roaming.....
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Roaming isn't unlimited. They terminate your contract when it gets to a certain point
Durch said:
I'm on Sprint my phone roams no matter what ROM I use .....its just Sprint service ...nothing to do with the ROMs..just something you have to deal with ...that's why they have unlimited roaming.....
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Technically, we don't have unlimited roaming. According to the Sprint Terms and Conditions (a lovely document, excellent prose):
The primary use of your Device must be for domestic purposes within the Sprint-owned network. Domestic means use in the 50 United States and U.S. Territories (except Guam). Sprint reserves the right, without notice, to deny, terminate, modify, disconnect or suspend service if off-network usage in a month exceeds: (1) voice: 800 min. or a majority of minutes; or (2) data: 300 megabytes or a majority of kilobytes. The display on your device may not always be on and will not indicate whether you will incur roaming charges. You can monitor usage online through My Account. Roaming is not available with single-band phones, or to customers who reside or whose primary use is outside an area covered by the Nationwide Sprint Network. Sprint may limit or terminate service if you move outside of the Sprint owned-network.
Click to expand...
Click to collapse
Now, they really won't terminate you for downloading that 301 MB file while roaming, but if you're racking up Gigs after Gigs on roaming, you might be kicked off.
Just a FYI.
Durch said:
I'm on Sprint my phone roams no matter what ROM I use .....its just Sprint service ...nothing to do with the ROMs..just something you have to deal with ...that's why they have unlimited roaming.....I'm Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I don't think you're totally understanding what it is that we're talking about. Yes the phone is "roaming" but theres no network connection. In other words the phone has no service at all (thats what my problem is) but if your phone is roaming a lot, even in spots where you should have good signal then I'd look into fixing that.

[Q] Flash back to sprint from ntelos???

So I recently bought a Sprint Note 2 that was flashed to Ntelos. (dirt cheap). I was going to use it on Ntelos because thats my current carrier, but the person that had it Left it attached to his prepaid account. So now I need to bring it back to sprint and have no clue how to do so. Does anybody know or can tell me where to look? I'm running out patience looking for answers
I don't think you can. But the way I lost my flash was Odin back to stock. At least that worked on the s3
Sent from my SPH-L900 using XDA Premium 4 mobile app
c_elliott1983 said:
So I recently bought a Sprint Note 2 that was flashed to Ntelos. (dirt cheap). I was going to use it on Ntelos because thats my current carrier, but the person that had it Left it attached to his prepaid account. So now I need to bring it back to sprint and have no clue how to do so. Does anybody know or can tell me where to look? I'm running out patience looking for answers
Click to expand...
Click to collapse
Please pardon me if this sounds dumb, but I am a newbie... I too have a Sprint Note 2. It used to be flashed to boost mobile. Now it's been flashed back to stock sprint ROM using file links and instructions right here in these forums. From what I gather, you want to go back to sprint? It's really simple. You do have the original MEID & Id ETC. right? Should be behind the battery when you remove it. I have successfully got my phone back to STOCK Sprint. It's really easy to do using TWRP and stock Sprint ROM files and DFS (there are others)...But these were the ones (programs) I used.. Read and read some more. Be patient (easier said than done..lol) you'll get it...It CAN be done...
bepatientw/me said:
Please pardon me if this sounds dumb, but I am a newbie... I too have a Sprint Note 2. It used to be flashed to boost mobile. Now it's been flashed back to stock sprint ROM using file links and instructions right here in these forums. From what I gather, you want to go back to sprint? It's really simple. You do have the original MEID & Id ETC. right? Should be behind the battery when you remove it. I have successfully got my phone back to STOCK Sprint. It's really easy to do using TWRP and stock Sprint ROM files and DFS (there are others)...But these were the ones (programs) I used.. Read and read some more. Be patient (easier said than done..lol) you'll get it...It CAN be done...
Click to expand...
Click to collapse
I hope so. lol. The goofball that had it before me flashed it to ntelos and left it on the account not used, but still attached. Actually made it difficult to sell as a ntelos phone, but I have some time today to play around with it today. I was told by sprint it needs a flash back to sprint. Sad part I have no fricken clue who flashed it to begin with it that way
Well first check the sticker underneath the battery. Have you verified it can be brought back tp sprint? If its ok on sprints end using the numbers on the back then you can move further. Let us know so we can direct you.
sent from my Provari with a mini rda!
patrao_n said:
Well first check the sticker underneath the battery. Have you verified it can be brought back tp sprint? If its ok on sprints end using the numbers on the back then you can move further. Let us know so we can direct you.
sent from my Provari with a mini rda!
Click to expand...
Click to collapse
Everything is correct. It can be activated on sprint. Ive already checked that multiple times
Ok well now you need to write the info from the sticker to the phone. You can use cdma workshop or dfs. Either program will work. You can also look at guides made for boost mobile. You can follow the guide. Instead of a donor phone you use the sticker info. Instead of changing your mmsc to boost you would change it to sprints. Either way get your msl first just in case. Use msl reader from the playstore. If it cannot read it push home. Then go to your dialer and push in ##3282# it will ahow a screen saying view or edit. Push edit. Enter a random 6 digit code. It doesnt matter what it is. It will give an error. Push home and hold it until recent tasks come up. Go to msl reader again and read the code again. It should give it to you this time.
sent from my Provari with a mini rda!
patrao_n said:
Ok well now you need to write the info from the sticker to the phone. You can use cdma workshop or dfs. Either program will work. You can also look at guides made for boost mobile. You can follow the guide. Instead of a donor phone you use the sticker info. Instead of changing your mmsc to boost you would change it to sprints. Either way get your msl first just in case. Use msl reader from the playstore. If it cannot read it push home. Then go to your dialer and push in ##3282# it will ahow a screen saying view or edit. Push edit. Enter a random 6 digit code. It doesnt matter what it is. It will give an error. Push home and hold it until recent tasks come up. Go to msl reader again and read the code again. It should give it to you this time.
sent from my Provari with a mini rda!
Click to expand...
Click to collapse
Msl is "000000" I tried some today with no luck. Everything failed in odin. Now i'm searching again, because its either odin mode or "firmware encountered a issue. Recovery from kies and try again. But it doesnt connect to kies. Actually wount connect even before I got started.
Got the phone back on. Still on Ntelos, so now I'm back to searching on how to remove this carriers flash. Nothing I've tried has worked
Hey guys I've got a similar problem. I got a note 2 and I'm wanting to flash it to boost but I haven't been able to read the HA/AAA keys. I did a reset ##786# to remove the old sprint account and downgraded to the LJC radio but I still get the access denied error for Nv_read on 466 and 1192. Also if I call 611 I get Ntelos wireless customer service and I'm kinda lost on what to do.
I didnt feed anyone lies. I have seen it done before. On my last phone. The epic touch 4g. If it doesnt work on this phone then thats too bad. I have never needed to flash a phone to another carrier.
Sent from my SPH-L900 using Tapatalk 4
In all fairness I have flashed a E4GT to an MVNO and back.
Google Chris41g's Epic to Boost steps. Follow the steps in there to change back your MEID only.
Flash a stock rooted restore - in this case I'll suggest MC2 rooted restore. This sets proper CSC info.
Turn phone on and ##72786#. Let HFA go through its steps.
LTE I can't say anything on since E4GT didn't have it.
The reason I did this way is because HFA will pull the HA/AAA keys and set the profile back on its own.
You only have to do it manually when flashing to MVNO because you can't use HFA.
Sorry but that's all the details I can mention on this thread - PM with any additional questions.

Sprint Galaxy Note 2 SPH-L900 (how do I reinstall Sprint PRLs&get rid of Page Plus)

Sprint Galaxy Note 2 SPH-L900 (how do I reinstall Sprint PRLs&get rid of Page Plus)
I bought a Sprint Galaxy Note 2 SPH-L900 not too long ago on Craigslist. Guy told me it worked with Sprint but he apparently flashed it to something that used Verizon PRLs (from what i've been told probably Page Plus). I recently tried to use Ringplus/Sprint with this phone but couldn't use it due to the PRL problem. When I try to make a call a robo Verizon operator pops up and I can't make calls. Of course, I can't get in contact with the guy that sold me the phone so im hoping you guys can help me get it to work with Sprint.
The MSL number has been changed to all zeros. And the dial code ##72786# shows "SCRTN" at the very top then just restarts my phone.
So I rooted the phone using this simple process. [SPH-L900] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1956180
Then I downloaded SuperSU. Then tried DFS to change my MSL number back to the original number. But it didn't work. I tried PRL Helper, but that too did not work. Won't let me reset the PRL. So I unrooted my phone (or so I thought) and reset the phone to factory to see if that would work, and it did not. So I reinstalled the CF-Auto-Root and now even SuperSU won't work. Im new to all this rooting stuff. THIS IS FRUSTRATING!
My phone is running stock rom. Android version 4.4.2 Baseband version L900VPUCOH3. Build number KOT49H.L900VPUCOH3.
PLEASE HELP!
I'm not sure of all the prl changes and how all that works. That said I would use odin to revert to a stock unrooted ROM and try to reactivate sprint via settings prl updates ect.
Edit: here's a link to stock ROM for Odin. Hope it helps http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
I'm not sure of all the prl changes and how all that works. That said I would use odin to revert to a stock unrooted ROM and try to reactivate sprint via settings prl updates ect.
Edit: here's a link to stock ROM for Odin. Hope it helps http://forum.xda-developers.com/showthread.php?t=2780984
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for the help. I followed the instructions in the link and it didn't help at all. I still get a Verizon operator when I try to make calls and when I enter in try the carrier reset dial code ##72786# ,it shows "SCRTN" at the very top then just restarts my phone. There has got to be a way to fix this...
Sounds like you need to Google how to flash your phone to whatever carrier you are wanting to get on. I myself am on boost mobile.
Sent from my SPH-L900 using XDA-Developers mobile app
Chunli'sThighs said:
Thanks for the help. I followed the instructions in the link and it didn't help at all. I still get a Verizon operator when I try to make calls and when I enter in try the carrier reset dial code ##72786# ,it shows "SCRTN" at the very top then just restarts my phone. There has got to be a way to fix this...
Click to expand...
Click to collapse
Did you call sprint and complain I had it happen one time and I sat on the phone and got transferred three times and then something they did had me back to normal.
Sent from my SPH-L900 using XDA-Developers mobile app
skryte said:
Sounds like you need to Google how to flash your phone to whatever carrier you are wanting to get on. I myself am on boost mobile.
Sent from my SPH-L900
Click to expand...
Click to collapse
Thanks. But thats what i've been doing. Im trying to get my phone to work with Ringplus(they use Sprint towers). I've been using cdma workshop to try resolve the issue but nothing has been working. I know that I need to revert my phone back to Sprint to be able to use Ringplus. Info on how to go from Page Plus to Sprint is very limited.
beansnorice said:
Did you call sprint and complain I had it happen one time and I sat on the phone and got transferred three times and then something they did had me back to normal.
Sent from my SPH-L900
Click to expand...
Click to collapse
Thanks for responding. This is actually one of the first things I did and I also kept getting transferred to different people. What specifically did you ask the Sprint people for them to do what they did?
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
skryte said:
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
Click to expand...
Click to collapse
How would I clone another phone? And in order to do this right, would I have to clone another SPH-L900?
skryte said:
I had to buy a cheap donor phone to clone the settings and such over so i could use mine on boost. Just fyi
Click to expand...
Click to collapse
Why boost allows most non prepaid sprint phones on are allowed on boost? http://www.prepaidphonenews.com/2015/06/list-of-sprint-phones-allowed-on-boost.html?m=1
Sent from my SPH-L900 using XDA-Developers mobile app
---------- Post added at 01:11 AM ---------- Previous post was at 01:10 AM ----------
Chunli'sThighs said:
Thanks. But thats what i've been doing. Im trying to get my phone to work with Ringplus(they use Sprint towers). I've been using cdma workshop to try resolve the issue but nothing has been working. I know that I need to revert my phone back to Sprint to be able to use Ringplus. Info on how to go from Page Plus to Sprint is very limited.
Thanks for responding. This is actually one of the first things I did and I also kept getting transferred to different people. What specifically did you ask the Sprint people for them to do what they did?
Click to expand...
Click to collapse
Just noticed you want to goto page plus that's a whole different ballgame. I'm sorry I couldn't be more help
Sent from my SPH-L900 using XDA-Developers mobile app
beansnorice said:
Just noticed you want to goto page plus that's a whole different ballgame. I'm sorry I couldn't be more help
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry for the late response and thanks for the reply but I was trying to go to RingPlus not PagePlus.
Problem Solved!
Forgot to update. I fixed this problem.
How I FIXED Ringplus PRL problem (flashing to stock rom may or may not be necessary)
I fixed the problem by rooting my Galaxy Note 2 SPH-L900 with odin here.
[SPH-L900] CF-Auto-Root
http://forum.xda-developers.com/showthread.php?t=1956180
The reverted to 4.2 Kit Kat stock rom using "ALL_SPT_L900VPUCNE2_L900SPTCNE2_1561791_REV04_user_low_ship.tar.md5" file.
https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Then I downloaded the "25xxx = residential acct - lte/800smr" PRL files from
http://*******************eestat.ir/?index=forum.xda-developers.com/showthread.php?t=1880781 (Add '?http://?xda-d?evelopers.freestat' to the beginning of link without the '?' marks.)
and extracting the "25XXX_LEG" folder then using the "25016.prl" file to desktop then using CDMA Workshop 2.7 to change the prl to the 25016 prl file.
Then I used trial version of DFS 16.2.21.0 to change my HEX and DEC and esn numbers to match what was on originally on the phone (I found this out through either Ringplus or going into phone dial code). It was a little difficult to change them because DFS kept saying it was skipping the request but after a little while even though it said it didn't change anything it did change it back to the original. That allowed my phone to be read by Ringplus and I was able to get the phone activated and PRLs updated automatically.

Categories

Resources