Hey everyone and thanks for taking the time to read this,
So the story goes as so: After doing some research couple months ago about the capability of the Verizon Galaxy S3 to work on T-mobile, i purchased it, and got it to successfully work on T-mobile(texts, calls, wi-fi). The problem is, i just recently upgraded to include a data plan, and i cannot access the internet, despite taking my phone to my cell phone dealer and contacting T-mobile.T-mobile even sent me a guide to do a mastery reset to factory in hopes to solve this problem, only to tell me afterwards that the phone version SCH-I535 is a "verizon locked-software" and i won't be able to set up an APN to work on the T-mobile network. This was all due to the fact that i was not able to set up a APN for T-mobile, and every time i tried to access it through setting, it brought me to a blank black page with the only option of "Reset to Default". After reading other forums and talking with some people, many have suggested i take this issue to XDA to find a solution.
So, here i am.....Does anyone know if it is possible for me to break/root/ or whatever it is called so i can successfully access the t-mobile network on my phone? Preferably an easier guide since i am sort of a newbie at this sort of stuff.
Thanks again for reading.
Before your Contract change, you were able to receive and make calls successfully with T-Mo Sim right ? Even now you can make calls too correct ? The reason I am asking this is to be able to check if you are really unlocked off of VZW. If you are not unlocked, then that would be the first step.
You are right, the APNs do drive Data Connection. If the stock firmware does not allow you to change APNs then you will have to root. Please post a screen of your Settings > About phone that shows your Rom Version, Baseband and Kernel.
Perseus71 said:
Before your Contract change, you were able to receive and make calls successfully with T-Mo Sim right ? Even now you can make calls too correct ? The reason I am asking this is to be able to check if you are really unlocked off of VZW. If you are not unlocked, then that would be the first step.
You are right, the APNs do drive Data Connection. If the stock firmware does not allow you to change APNs then you will have to root. Please post a screen of your Settings > About phone that shows your Rom Version, Baseband and Kernel.
Click to expand...
Click to collapse
Hey Perseus, thanks a lot for taking the time to reply. I bought the phone in the summer off someone who had verizon. I have always had T-mobile, and considering this phone is GSM, i decided to buy it because it would probably work for T-mobile. I had the phone unlocked, and i am currently using it to make calls, texts, and even use wi-fi with no problem. The only problem at this time is that i recently added a data plan which i cannot currently use. Here is a screen shot of what you have requested.
Thanks again
First try
Settings > More > Mobile Networks > Preferred Network Type.See what it is set to. Change it to LTE/GSM/WCDMA if needed. See the other option System Select as well.
Also separately try the following.
Hit ##DATA# in the Dialer. In the subsequent Menu choose EDIT > OTHERS > LTE APN
If all fails, please Root the phone and then try. The way you go about is
1. Flash a Custom Recovery via Odin. Make sure the version of Custom recovery is for your model D2VZW not D2TMO.
2. Flash a SuperSU zip file via Recovery and then hit fix permissions in the recovery.
Try the APN Settings after that. IF you can actually access them, then set them according to this link.
If all the above fails, I'd suggest a custom Rom for d2VZW.
You will never get 4g trust me I had one... you will just get the E
Sent from my SGH-T999L using xda app-developers app
Ok, so i tried to changed it to LTE and i got no service at all, so i switched it back to Global. I also tried the dialer thing several times, and got the " connection problem or invalid MMI code"
So i guess i am going to have to root the phone? Does anyone know a good video tutorial or written tutorial on how to safely do this? Also, what exactly is rooting?
HackThisThing said:
Ok, so i tried to changed it to LTE and i got no service at all, so i switched it back to Global. I also tried the dialer thing several times, and got the " connection problem or invalid MMI code"
So i guess i am going to have to root the phone? Does anyone know a good video tutorial or written tutorial on how to safely do this? Also, what exactly is rooting?
Click to expand...
Click to collapse
You have to enable the mmi codes to use them. Anyway as stated above your reply you will never get 3g or 4g just edge (seen it personally) which is pretty darn slow.. Not worth it if you ask me and be paying for data.. If you still want to root it and keep trying to add sons check the Verizon forums.. They could probably help you a lot more than on this side of the forums
Sent from my SGH-M919 using Tapatalk
Guys, he is not getting ANY data signal at all. His problem isn't getting the specific icon but being not able to change APNs.
@HackThisThing, you are better off following up on Verizon Device forum. That forum does have a video tutorial for Rooting. Here's forum link.
I don't think you will be able to change APNs without rooting. I checked with a buddy of mine who has the same device as you.
Here's a good answer to What is Rooting ?
Even if you CAN fix it, why bother if you can only get 2G? I'd sell it or trade it for a phone that's more compatible with T-Mobile 's network instead of paying for data and only getting dial-up speeds. I get that solving problems is fun, but OP do you want to live with only 2G?
Sent from my SGH-T999 using Tapatalk
I don't agree with that assessment. Just like the T999L phone, this device will work on LTE Bands just fine. OP just needs to wait for LTE to be rolled out in their area. There's a coverage map and roll out schedule on T-Mo website and the T-Mo News blog.
It's worth a look, but could still leave them with patchy coverage. If it's going to be a while, why wait when it's not hard to just trade the phone? I guess I don't see a reason why hold out on getting a Verizon phone to work when you could just get one that works now with little to no monetary loss. It's just a Verizon S3, not really something worth "waiting" for when they could get the same thing but more functional on their network of choice.
They made an honest mistake and waiting might give them "good enough" service - but other than that they're stuck with dial up speed only and risk bricking a phone they could just trade or sell now.
Maybe I'm just impatient and risk averse.
Sent from my SGH-T999 using Tapatalk
OP has already purchased this VZW version.
Same Problem...
I have the same problem....
How to get any type of data...?
Related
So I got a new SGS3 and it works fine, except when I am in 3G. When I am in 3G I can receive and place calls but no data. Att support was no help, so I figured I would check here. As far as I can tell it is either a APN, Gateway, or Account settings issue (the later being something I can not do anything about). I say this because my n1 gets signal fine here, and it seems to run fine, so long as it is 4g.
Any ideas? Also, does the SGS3 have EDGE support?
partyk1d24 said:
So I got a new SGS3 and it works fine, except when I am in 3G. When I am in 3G I can receive and place calls but no data. Att support was no help, so I figured I would check here. As far as I can tell it is either a APN, Gateway, or Account settings issue (the later being something I can not do anything about). I say this because my n1 gets signal fine here, and it seems to run fine, so long as it is 4g.
Any ideas? Also, does the SGS3 have EDGE support?
Click to expand...
Click to collapse
Bump: And also I tried to set an old APN but that didn't help.
Have you rooted and flashed it or are you stock? If you are just stock...there is nothing this forum can do to help really.
tomtommy306 said:
Have you rooted and flashed it or are you stock? If you are just stock...there is nothing this forum can do to help really.
Click to expand...
Click to collapse
I have not rooted or anything, I have tried some APNs but I was hoping other people might help me out with something else to try. I don't really buy the whole " if you are stock... there is nothing that can be done" What if I was trying to get help with a stock developer build of my n1 (which I have previously) or are you asserting that without rooting I will not be able to fiddle with the modem settings?
What I'm saying is the phone comes ready out of the box. Unless you have changed something then it is a network problem. You will have to take it up with AT&T.
U can only do so much stock....and thats not alot! Root and use stock rom so u will have root access to see whats what...and to be able to control what u do or dont want ur data to do
red s3 ocd 2.1
JB calhoun said:
U can only do so much stock....and thats not alot! Root and use stock rom so u will have root access to see whats what...and to be able to control what u do or dont want ur data to do
red s3 ocd 2.1
Click to expand...
Click to collapse
Thank you guys for trying to help but I know all this. I am just in the period of time I can take it back and I don't want to risk that by bricking it while monkeying around.
I (Maybe) have isolated the problem, they said that I was set up for LTE and there are some issues with proper propagation of properties. Anyway problem "May" only effect people on ATT with Samsung S3s bought at BestBuy locations and the upgrade includes unlimited data. Still working will update tonight....
BUMP!
hi everyone,
I got my S3 from Bell two weeks ago, it worked fine most of the time including calls, sms and data.
but occasionally for whatever reason the phone cannot make call or send sms, no ring for incoming call also. it shows "not registered on network" when I try to dial. at the time showing this error, there was signal on the bar.
maybe after long time, it can registered itself into network again, but most of the time, I just restart the phone and it works fine again.
I called Bell and they asked me to replace the SIM card, so I did, but I still see this error. So I think it is not SIM issue.
anyone has idea what the cause could be? or is there anyway to fix it?
I tried to search online before I ask, just couldn't find a solution so far.
so post here and hope anyone can help,
thanks for the help in advance.
I've had this issue as well.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I had this problems with rogers as well. Same as you I contacted rogers they told me to remove the sim and replace it. Worked for a while but kept happening. I got fed up and rooted then installed kyan rom and haven't had the problem since. Not sure if it was rom based or if the factory reset before flashing resolved the issue but haven't had it since. Hope someone figures this out though because it's annoying especially on a new phone that is stock.
Sent from my SGH-I747M using Tapatalk 2
Good to hear you had fixed it.
I might try factory reset to see what happen.
healer82 said:
I had this problems with rogers as well. Same as you I contacted rogers they told me to remove the sim and replace it. Worked for a while but kept happening. I got fed up and rooted then installed kyan rom and haven't had the problem since. Not sure if it was rom based or if the factory reset before flashing resolved the issue but haven't had it since. Hope someone figures this out though because it's annoying especially on a new phone that is stock.
Sent from my SGH-I747M using Tapatalk 2
Click to expand...
Click to collapse
Had this problem on bell a few times the first 2 weeks I had my phone. Went to the bell store and without hesitation they told me to change the mobile network mode from gsm/hspa+/lte
To just gsm/hspa+.
Reason given was the Lte network where I was using my phone (west island, montreal) wasn't strong enough. So my phone would switch between networks until eventually it got in that state. Personnaly I think the problem was more signal penetration into the computer lab I work in.
It's been 2 weeks stable so far. A co-worker reported the same problem to me last week and he took my advice and hasn't had the problem since.
Sent from my SGH-I747M using xda app-developers app
Thank you very much for the tip. I was wondering that too, because I noticed that the network icon at top bar keep changing between H+ and LTE by itself. and I wonder why too.
I will try and see what happened.
thanks
uglyren said:
Had this problem on bell a few times the first 2 weeks I had my phone. Went to the bell store and without hesitation they told me to change the mobile network mode from gsm/hspa+/lte
To just gsm/hspa+.
Reason given was the Lte network where I was using my phone (west island, montreal) wasn't strong enough. So my phone would switch between networks until eventually it got in that state. Personnaly I think the problem was more signal penetration into the computer lab I work in.
It's been 2 weeks stable so far. A co-worker reported the same problem to me last week and he took my advice and hasn't had the problem since.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
SAMSUNG i747M not registered on network
I had this samsung s3 i747M from canada. Got it unlocked here in Pakistan. Placed a local sim in it. It recognizes the sim, registers it, makes calls, but then after a while, it shows "not registered on network". i restart, it registers network again, then loses it again. It keeps doing it. sometimes it is registered on network, but can't make or receive calls.
I have tried a number of things but the problem is not resolved and i'm fed up to the point that i want to throw this phone away.
The original rom had android 4.3
here's the list of things i have tried.
* changed the network mode to "GSM only" and "WCDMA/GSM (auto connect)" - NO USE
* Factory data reset a few times - NO USE
* tried a custom rom (it was so bad, i deleted it, don't even remember the name) - NO USE
* stock rom 4.4.2 from "sammobile.com" - NO USE
* tried flashing different modems from "http://forum.xda-developers.com/showthread.php?t=1831898" - NO USE
* tried changing the options from *#2263# to my network's specifications - NO USE
* tried sims from different networks - NO USE
PLEASE IF SOMEONE CAN HELP ME OUT HERE, I'M DESPERATE
@qamar_ish, what ROM is on your Samsung phone?
Originally it came with android 4.3. Currently it has this kitkat rom, which i downloaded from "sammobile.com".
the filename is this:
I747MVLUFNK2_I747MOYCFNK2_I747MVLUFNK2_HOME.tar.md5
It said on the webpage that it is the stock rom for SGH-i747M
audit13 said:
@qamar_ish, what ROM is on your Samsung phone?
Click to expand...
Click to collapse
Maybe flash the latest 4.4.2 ROM?
Thats what it is. it is the 4.4.2 rom, but the problem persists.
audit13 said:
Maybe flash the latest 4.4.2 ROM?
Click to expand...
Click to collapse
Does your carrier require an AWS-compatible phone? Does the i747m support all frequencies provided by your provider?
I'm not sure about whether an AWS phone is required or not. But it certainly supports all the frequencies provided by the networks here. I checked it by using the code *#2263# and the options have the frequency supported by my networks here, that is "ufone" and "warid"
PS. I'm not an expert on this thing, whatever i'm doing, i learnt it during the last week..
audit13 said:
Does your carrier require an AWS-compatible phone? Does the i747m support all frequencies provided by your provider?
Click to expand...
Click to collapse
It looks like your phone does support your carrier's frequencies.
Does your phone show the imei# from the dialpad? Is it possible there is something wrong with the phone's imei #?
It does show the correct imei when i dial *#06#. It had lost its imei initially when i got it unlocked, but got it fixed from someone.
qamar_ish said:
It does show the correct imei when i dial *#06#. It had lost its imei initially when i got it unlocked, but got it fixed from someone.
Click to expand...
Click to collapse
Do you know why it lost the imei during the unlock process? Does the imei # in the phone match the imei # on the label under the battery?
I dont know how it lost imei. The guy who fixed it said that the imei is corrupted and he fixed it. Now it shows the same imei as on the back of the device.
I have never had a Samsung phone lose the imei if the phone was unlocked using a code, assuming that is how your phone was unlocked.
Did you try re-injecting the imei with the efs folder? It can be done using nvwriter.
Ok. I will try that. Can u guide me how to do it? Or share a link or something.
And thanx for helping me out here man..
Link: http://forum.xda-developers.com/showthread.php?t=1804117
Hi Guys,
I will try to make this as short as possible. I have a T-Mobile Galaxy S3 that was rooted and running the liquid smooth rom and activated on Simple Mobile. It worked great for a little over two weeks, but when my wife went to use the phone this morning it would say "Not registered on network" when she tried to make a call. I thought this may be a carrier issue so I contacted Simple Mobile. I started looking up this issue online and found that many people were in the same boat if they had either lost their IMEI or had a blocked IMEI. I got a little worried since I purchased the phone on Craigslist so I called T-Mobile. They confirmed that the IMEI is clean and can be activated. I decided to unroot the phone and return to stock. I used ODIN to flash firmware build IMM76D.T999UVALEM. Initially it got stuck on the boot screen so I did a factory data wipe and all was okay. I also reset the binary flash counter prior to reloading the stock firmware. When all was said and done the phone booted back up and the device status was back to normal and all seemed right in the world except there was still no voice or data. I thought maybe Simple Mobile just sucks so I went to a T-Mobile store and activated the phone on a prepaid plan with unlimited data. The device powered up and immediately sent a voicemail notification, but did not activate. Under status I have Network: Unknown, Mobile Network Type: Unknown, Service State: Out of Service, My Phone Number: Unknown, ERI Version: Unknown. The IMEI is there and correct.
At this point I have taken this to the edge of my ability and I could really use some advice. I fear that this may be an issue with the device and if so I do not know what recourse I have to get it fixed under warranty since I bought it used. At this point I will try anything and all suggestions/help will be greatly appreciated!
Check your apn settings. Go to settings -> more settings -> mobile networks -> access point names. If you're still on t-mobile then press menu button and select reset to default. If you're on someting else find apn settings for your network and copy them in the right places. Besides that and hardware problem I don't see any other reason, but I'm not an expert on that and I think there are people who will have some ideas on how to fix it.
Good luck
Sent from my SGH-T999 using xda app-developers app
Hi Hajme,
Thanks for the reply. I forgot to mention above, but I did verify the APN settings and everything looked good. The odd thing is that even if the APN was whack, I should still be getting voice. I contacted Samsung and luckily they are going to take it in on a warranty claim, so hopefully they can work it out.
I have the exact same problem but for verizon. If anybody knows a way to fix it please let me know. Thanks.
T-mobile Samsung Galaxy S3 - Searching loop problem for Mobile Network
I am having the same problem this morning! I have unlocked the tmobile sgs3 and i have been using the phone for the past three months using another carrier sim. I searched all the forums and couldn't fine a solution for it! There was no problem with the carrier sim, cos I tried it on my other phones and it worked fine. I have flashed cm10.1 nightly build , aokp , stock ics rom and stock jelly bean, still having the same issue... I have even reseted the binary counter, still no use ! I went into service mode using *#197328640#, found that the carrier name was "unknown". There was no no problem with the antenna, I could still receive other carrier signals . The thing is it does not register , It keeps on going in a search loop! The product was purchased from T-Mobile and is unlocked! What should I do?
ramkumar19890 said:
I am having the same problem this morning! I have unlocked the tmobile sgs3 and i have been using the phone for the past three months using another carrier sim. I searched all the forums and couldn't fine a solution for it! There was no problem with the carrier sim, cos I tried it on my other phones and it worked fine. I have flashed cm10.1 nightly build , aokp , stock ics rom and stock jelly bean, still having the same issue... I have even reseted the binary counter, still no use ! I went into service mode using *#197328640#, found that the carrier name was "unknown". There was no no problem with the antenna, I could still receive other carrier signals . The thing is it does not register , It keeps on going in a search loop! The product was purchased from T-Mobile and is unlocked! What should I do?
Click to expand...
Click to collapse
I'm having the same issue after unlocking my GS3 T-999.
Have you tried using the data restore app by peoplsarmy
Sent from my SGH-T999 using xda premium
Vodafone India
May I know which "data restore app" , you are referring to?
Hey guys, I'm using the Galaxy S3 and my current carrier is Rogers. I've always been on 4G in the area that I'm in, and with the countless roms I've installed I've never come across any problems. Today I was trying out some new roms, but when I flashed them, I noticed that it swapped from 4G to E(aka Edge). Even if I flash back to my nandroid backup or even a fresh install if the previous rom I was using, I'm still stuck on Edge. Now even though it says I'm connected to Edge, never mind reduced speed, my internet just doesn't even work at all. For some reason even if I'm connected to wi-fi, no matter what I do it says there's no connection. I've read about flashing modems, which I have tried and it seems I'm doing it wrong? I put it on to my sd, boot in to recovery and flash it, but whenever I do I just go in to an endless boot loop. I've spent the past six hours pulling out my hair and trying to get this fixed but no solution yet, so now I've put my hope in to you guys! Any help would be appreciated!
Thanks!
P.S. I'm sorry if I can't reply back right away, I'm currently doing night shifts at work and even though it's 9:45am here, it's technically my bed time, so I will get back to you as soon as I can!
Some extra information if it may help - The rom I was using that worked properly was Triune 2, I've played around with a few roms since, but the one that originally swapped my 4g to Edge was Mark of the Dragon 3.0.
I can think of two possibilities:
1) Some ROMs will reset your phone's internal network settings to only use specific types of networks (e.g. when I first got my phone, the CM10 build I flashed at the time disabled LTE). You can check this by dialing *#*#4636#*#*, going into "Phone information", and scrolling down to "Set preferred network type"; you'll want one of the LTE settings.
2) Reportedly, your phone's IMEI will sometimes be erased during a ROM update (check this in the Settings -> About phone -> Status menu, or in the same "Phone information" menu as above). Check here if that happened.
Hey, I gave number 1 a shot and everything was fine, so I took a look at option 2 and my IMEI isn't gone, but it's showing "0". I searched online and it seems like "0" means it's been deleted, so I'm about to give it a go and see if I can get it up and running. Anyways, thanks for the reply! I'll post and update on how everything works out.
*UPDATE* Alright, problem fixed! I'm back at 4G, everything is running smooth and fast! Took a little bit but everything is working fine, and now I know how to fix this problem if it should arise again, thanks again for the help, I appreciate it!
Hey, I'm back again. Well, I thought the problem was fixed, I was back on 4G all day until a little after I started work at around 10:30pm when my network swapped back to Edge and it's been there since(now 6:57am). My IMEI is still intact as well. I've tried flashing back to stock with odin and injecting the file to see what happens but no luck. Unfortunately I haven't reached the 10 post marker which means I can't ask for help on that part of the forum yet, so here I am in your hands once again, any help from you guys would be greatly appreciated!
Serephral said:
Hey, I'm back again. Well, I thought the problem was fixed, I was back on 4G all day until a little after I started work at around 10:30pm when my network swapped back to Edge and it's been there since(now 6:57am). My IMEI is still intact as well. I've tried flashing back to stock with odin and injecting the file to see what happens but no luck. Unfortunately I haven't reached the 10 post marker which means I can't ask for help on that part of the forum yet, so here I am in your hands once again, any help from you guys would be greatly appreciated!
Click to expand...
Click to collapse
Out of curiosity, have you checked the "set preferred network type" setting again?
I've also heard recently that there may be some problems with Rogers APNs in non-standard ROMs, so it might be worth checking your APN settings.
Or, it could be an LTE network outage, unlikely as that seems...
Yes I have and everything is fine. However, I was looking around at a few things some other people have done, not with the exact problem I have, but similar, I tried something out and it worked. Dial *#197328640#>UMTS>DEBUG SCREEN>PHONE CONTROL>NETWORK CONTROL>BAND SELECTION>LTE BAND PREFERENCE>LTE ALL, let it sit there for about 30 seconds and then reset the phone. Do it again, go in to BAND SELECTION and then choose AUTOMATIC, wait 30 seconds and reboot your phone again. I'm back to 4g and actually, it seems faster than when I originally had 4G, but I think I'm just used to how slow Edge is now . Although the other fix got me back to 4G as well, but then it swapped back to Edge so I'll wait for at least 24 hours before I can confirm it completely fixed. Once again thanks for the response! Most helpful forums I've been on!
It hasn't been 24 hours but I thought I'd report back while I'm on my break. I'm still at 4G so things seems to be going well, hopefully it won't go back as it seems like it will stay at 4G. So, unless I'm having troubles again, rather than waiting the 24 hours and posting an update, think of it as a good thing that I don't report anything(or at least I will, since it's my phone ) Thanks again for the help, I appreciate it!
Serephral said:
Yes I have and everything is fine. However, I was looking around at a few things some other people have done, not with the exact problem I have, but similar, I tried something out and it worked. Dial *#197328640#>UMTS>DEBUG SCREEN>PHONE CONTROL>NETWORK CONTROL>BAND SELECTION>LTE BAND PREFERENCE>LTE ALL, let it sit there for about 30 seconds and then reset the phone. Do it again, go in to BAND SELECTION and then choose AUTOMATIC, wait 30 seconds and reboot your phone again. I'm back to 4g and actually, it seems faster than when I originally had 4G, but I think I'm just used to how slow Edge is now . Although the other fix got me back to 4G as well, but then it swapped back to Edge so I'll wait for at least 24 hours before I can confirm it completely fixed. Once again thanks for the response! Most helpful forums I've been on!
Click to expand...
Click to collapse
I just switched to Fido (uses the same towers as Rogers) and this advice is what got my LTE working.
Sent from my SGH-I747M using Tapatalk 2
Thanks do much for this, I had the exact same problem after flashing MiuiAndroid and Wicked Sensations. Don't know which one effed it up but it was definitely one of those two. Also, I Don't think it is a placebo effect on the speed increase, cause mine is blazing fast after implementing this fix. You should maybe re-title the thread so others in this situation can find this fix, good find and thanks again!
Just want to confirm that this particular code can only be entered from a stock dialer? I I tried entering it from cm10's dialer and it doesn't do anything.
Sent from my SAMSUNG-SGH-I747 using xda premium
nevetsgtI9100 said:
Just want to confirm that this particular code can only be entered from a stock dialer? I I tried entering it from cm10's dialer and it doesn't do anything.
Click to expand...
Click to collapse
Correct.
Is there an equivalent code to enter from non stock key pad?
Thx
Sent from my SAMSUNG-SGH-I747 using xda premium
Having this issue
IMEI is at 0 after flash to CM10
Link that the person who was assisting OP is not valid anymore on these forums.
Can anyone still help?
Serephral said:
Yes I have and everything is fine. However, I was looking around at a few things some other people have done, not with the exact problem I have, but similar, I tried something out and it worked. Dial *#197328640#>UMTS>DEBUG SCREEN>PHONE CONTROL>NETWORK CONTROL>BAND SELECTION>LTE BAND PREFERENCE>LTE ALL, let it sit there for about 30 seconds and then reset the phone. Do it again, go in to BAND SELECTION and then choose AUTOMATIC, wait 30 seconds and reboot your phone again. I'm back to 4g and actually, it seems faster than when I originally had 4G, but I think I'm just used to how slow Edge is now . Although the other fix got me back to 4G as well, but then it swapped back to Edge so I'll wait for at least 24 hours before I can confirm it completely fixed. Once again thanks for the response! Most helpful forums I've been on!
Click to expand...
Click to collapse
____________________________
I am having the same issue, my IMEI is back in place. When I get to the BAND SELECTION it says, "RAT Selection option [next line] is restricted" I have been searching all day to get off EDGE but cant. Any advice with this?
Me stuck with edge it's crazy pls someone help us out even got imei back but same issue s edge only and after band section it go's to rat
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ebubbastew said:
Me stuck with edge it's crazy pls someone help us out even got imei back but same issue s edge only and after band section it go's to rat
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
There used to be a different method on the forums but all posts involving how to inject imei and then restore data were removed.
Hey guys, I'm having the same issue here..at first when I flashed it was fine had 4G but today I noticed all I've been getting is edge. This is driving me nutsss
ebubbastew said:
Me stuck with edge it's crazy pls someone help us out even got imei back but same issue s edge only and after band section it go's to rat
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
2 things that i can think of...
1)Make sure you have the LTE option selected in your Mobile Networks.
2)Take a look at your APN settings for you carrier. Flashing roms sometimes erases these settings.
That's where i would look first...
Cheers
massiveloop said:
____________________________
I am having the same issue, my IMEI is back in place. When I get to the BAND SELECTION it says, "RAT Selection option [next line] is restricted" I have been searching all day to get off EDGE but cant. Any advice with this?
Click to expand...
Click to collapse
Please let me know if you fix this. I'm having the same problem, and playing with LTE band selection doesn't work. When I force the band selection, the phone won't even go into service. The same thing happens with WCDMA.
Apparently, the nvbackup stores more than the IMEI. Even when you replace the IMEI, nobody seems to get data back. Unless, of course, you had a backup. Which, unfortunately, I was not smart enough to do....
Hey guys, I have the exact same issue as this:
-I flashed CM10.2 from a CM10.1 nightly which wiped my IMEI. I injected the IMEI using NV-items reader/writer.
-Reloaded stock ICS rom, IMEI returned but couldn't get up from EDGE
-Tried using the peoplesarmy's removed IMEI restore tool, didn't do anything
The phone still works, only its on EDGE all the time.
Literally the only solution for me was using my warranty and getting a new phone.
REPEAT: BACKUP YOUR **** OR YOU GOTTA GET A NEW PHONE!
I have a sprint samsung galaxy note 2 that is rooted and flashed to verizon running macksrom 5.0 and i started having this problem. the problem is i can call from my phone when it is not on wifi but the 3g/4g isnt showing up top in the status bar i cant access the internet unless im on wifi. when i go into settings and click on mobile networks it acts like it is going to do it then it hangs at a black screen and a box pops up and says unfortunately, the process com.android.phone has stopped ive tried cleaning caches and fixing permissions, nothing helps, there is also another thing that pops up and says error #89 unknown error. it also says when i click on stuff, use touchwiz or xperia to perform this action. Always or just once.) I bought this samsung gn 2 online everything was already done to it. I think whoever installed the macks rom must have left the the touchwiz on it. Because it keeps asking me when i do things, perform action using touchwiz or xperia I also noticed that i have goomanager on it. Can i use the goomanager to reflash this phone? If so can someone give me information on how to properly do it. i also read something about mobile odin. Which one would be the easiest to use?
You have too much going on there. I would relash the rom. Make sure you wipe system, casche and devick; may want to do old school and wipe three times.
Goo Manager is probably suppose to be there, by design from the ROM developer. That should have been in the OP on the ROM three, along with known issues.
brucerryork said:
I have a sprint samsung galaxy note 2 that is rooted and flashed to verizon running macksrom 5.0 and i started having this problem. the problem is i can call from my phone when it is not on wifi but the 3g/4g isnt showing up top in the status bar i cant access the internet unless im on wifi. when i go into settings and click on mobile networks it acts like it is going to do it then it hangs at a black screen and a box pops up and says unfortunately, the process com.android.phone has stopped ive tried cleaning caches and fixing permissions, nothing helps, there is also another thing that pops up and says error #89 unknown error. it also says when i click on stuff, use touchwiz or xperia to perform this action. Always or just once.) I bought this samsung gn 2 online everything was already done to it. I think whoever installed the macks rom must have left the the touchwiz on it. Because it keeps asking me when i do things, perform action using touchwiz or xperia I also noticed that i have goomanager on it. Can i use the goomanager to reflash this phone? If so can someone give me information on how to properly do it. i also read something about mobile odin. Which one would be the easiest to use?
Click to expand...
Click to collapse
Doesn't verizon run a slightly different hardware version from sprint? Are you trying to connect to the verizon or the sprint network? If verizon, there are two possibilities. 1 - hardware, the sprint phone just doesn't like the verizon signal. (unlikely) 2. - ROM, is the ROM the sprint version or the verizon version? if it's the sprint version I would say that framework differences are causin the issue and would reflash the correct version for your carrier (or the correct port - the hardware differences I mentioned earlier)
Have you called customer service about getting your phone set up on their network? About getting the IMEI number registered in their database?
In other words what have you already tried with this used phone in order to get it set up on your provider's network?
[Q] OMG! (Anyone???) samsung gn2 networks prob
lovekeiiy said:
You have too much going on there. I would relash the rom. Make sure you wipe system, casche and devick; may want to do old school and wipe three times.
Goo Manager is probably suppose to be there, by design from the ROM developer. That should have been in the OP on the ROM three, along with known issues.
Click to expand...
Click to collapse
thanks alot for even just replying to my post. im nervous about trying this flashing thing im afraid that im gunna screw it up royally. im hoping someone will guide me through how to do it
[Q] OMG! (Anyone???) samsung gn2 networks prob
DreamingWolf said:
Doesn't verizon run a slightly different hardware version from sprint? Are you trying to connect to the verizon or the sprint network? If verizon, there are two possibilities. 1 - hardware, the sprint phone just doesn't like the verizon signal. (unlikely) 2. - ROM, is the ROM the sprint version or the verizon version? if it's the sprint version I would say that framework differences are causin the issue and would reflash the correct version for your carrier (or the correct port - the hardware differences I mentioned earlier)
Have you called customer service about getting your phone set up on their network? About getting the IMEI number registered in their database?
In other words what have you already tried with this used phone in order to get it set up on your provider's network?
Click to expand...
Click to collapse
it was originaly a sprint phone that was rooted and flashed to verizon. ive been using it for months on the verizon network and have had zero problems until about five days ago. i dont know if the rom is sprint or verizon. how do i tell? i would reflash it if i knew what i am doing. i am a complete uber noob. im just hoping someone will give me directions how to reflash it. i dont care what rom i just want it to work again on the verizon network. i want to be able to use it to go geocaching with my sons. just got it all set up ready to go caching with em and the very next day it decided to go mental on me.
I would check out the thread on taking the Sprint GN2 to TMobile, Verizon, Boost, and Ting. I think it's in the question and trouble shooting subforum.
lovekeiiy said:
I would check out the thread on taking the Sprint GN2 to TMobile, Verizon, Boost, and Ting. I think it's in the question and trouble shooting subforum.[/QUOTe thanks for helping me i found the thread and read it. it seems like a lot to do. if i can acomplish it will it work on the verizon network?
Click to expand...
Click to collapse
brucerryork said:
lovekeiiy said:
I would check out the thread on taking the Sprint GN2 to TMobile, Verizon, Boost, and Ting. I think it's in the question and trouble shooting subforum.[/QUOTe thanks for helping me i found the thread and read it. it seems like a lot to do. if i can acomplish it will it work on the verizon network?
Click to expand...
Click to collapse
I don't know personally, but I believe so. You'll have to read and ask in that thread. Those are people who may have done the switch and can give better advise from experience.
Click to expand...
Click to collapse