Develop Bugs

No 3G data on my new SGS3

So I got a new SGS3 and it works fine, except when I am in 3G. When I am in 3G I can receive and place calls but no data. Att support was no help, so I figured I would check here. As far as I can tell it is either a APN, Gateway, or Account settings issue (the later being something I can not do anything about). I say this because my n1 gets signal fine here, and it seems to run fine, so long as it is 4g.
Any ideas? Also, does the SGS3 have EDGE support?

partyk1d24 said:
So I got a new SGS3 and it works fine, except when I am in 3G. When I am in 3G I can receive and place calls but no data. Att support was no help, so I figured I would check here. As far as I can tell it is either a APN, Gateway, or Account settings issue (the later being something I can not do anything about). I say this because my n1 gets signal fine here, and it seems to run fine, so long as it is 4g.
Any ideas? Also, does the SGS3 have EDGE support?
Click to expand...
Click to collapse
Bump: And also I tried to set an old APN but that didn't help.

Have you rooted and flashed it or are you stock? If you are just stock...there is nothing this forum can do to help really.

tomtommy306 said:
Have you rooted and flashed it or are you stock? If you are just stock...there is nothing this forum can do to help really.
Click to expand...
Click to collapse
I have not rooted or anything, I have tried some APNs but I was hoping other people might help me out with something else to try. I don't really buy the whole " if you are stock... there is nothing that can be done" What if I was trying to get help with a stock developer build of my n1 (which I have previously) or are you asserting that without rooting I will not be able to fiddle with the modem settings?

What I'm saying is the phone comes ready out of the box. Unless you have changed something then it is a network problem. You will have to take it up with AT&T.

U can only do so much stock....and thats not alot! Root and use stock rom so u will have root access to see whats what...and to be able to control what u do or dont want ur data to do
red s3 ocd 2.1

JB calhoun said:
U can only do so much stock....and thats not alot! Root and use stock rom so u will have root access to see whats what...and to be able to control what u do or dont want ur data to do
red s3 ocd 2.1
Click to expand...
Click to collapse
Thank you guys for trying to help but I know all this. I am just in the period of time I can take it back and I don't want to risk that by bricking it while monkeying around.

I (Maybe) have isolated the problem, they said that I was set up for LTE and there are some issues with proper propagation of properties. Anyway problem "May" only effect people on ATT with Samsung S3s bought at BestBuy locations and the upgrade includes unlimited data. Still working will update tonight....
BUMP!

no hotspot app

Hi guys I got a weird problem I have 2 galaxy note ii's sph l900 in installed stock rooted deodex mc2 posted by crawrj on both now one has hotspotin settings one doesnt have it anyone know y? Also anyone know where to find the zip to fix sdcard to revert from aosp back to tw?

I not clear on what you're asking. I'm running a doexidiezed stock MC2 rom. I see there is a Hotstop toggle in the settings for Wireless and Network. Since I don't subscribe to Sprint's hotspot service, I don't know if it works or not. I use Trev E Mod's WiFi tether instead.
Don't know about the zip file you seek.

lovekeiiy said:
I not clear on what you're asking. I'm running a doexidiezed stock MC2 rom. I see there is a Hotstop toggle in the settings for Wireless and Network. Since I don't subscribe to Sprint's hotspot service, I don't know if it works or not. I use Trev E Mod's WiFi tether instead.
Don't know about the zip file you seek.
Click to expand...
Click to collapse
that's wat I mean the toggle in setting under wifi one of mine has it one doesnot have it it's just simply not in settings. Im not sure if the one that has it works or not I don't even have sprint I have metropcs but eould still like to know y its there on one and missing on the other

oakieville said:
Hi guys I got a weird problem I have 2 galaxy note ii's sph l900 in installed stock rooted deodex mc2 posted by crawrj on both now one has hotspotin settings one doesnt have it anyone know y? Also anyone know where to find the zip to fix sdcard to revert from aosp back to tw?
Click to expand...
Click to collapse
If you used the same download to flash both phones I would just reflash the one without hotspot. If you used different downloads then I would redownload then reflash. Phones can be very individualistic and quirky. What doesn't take in one flash will take in another and what works on one phone won't always on another. Just ask any of the Devs putting out ROMs
As to the zip you are looking for I have a copy and you can download it here.

so you have two different phones. I assume both on MetroPCS. Are they both SPH-L900 (the sprint GN2 variant)? Did you have the exact same rom on both? You're leaving a lot of out, and we're having to guess on the info that's needed to make a good suggestion.
My initial though, is the rom suppose to have the hotspot? It's possible it was removed.
And even if was there, I have no idea if it would work. one, I don't know if Metro offers hotspot service. two, I'm not sure where the hotspot would try to go--metro or sprint.

DreamingWolf said:
If you used the same download to flash both phones I would just reflash the one without hotspot. If you used different downloads then I would redownload then reflash. Phones can be very individualistic and quirky. What doesn't take in one flash will take in another and what works on one phone won't always on another. Just ask any of the Devs putting out ROMs
As to the zip you are looking for I have a copy and you can download it here.
Click to expand...
Click to collapse
I know phones can be quirky especially samsung but yes I flashed the same zip on both I have redownloaned several times and reflashed several times I can even made a system backup in recovery and restore on other phone same thing no hotspot in settings

lovekeiiy said:
so you have two different phones. I assume both on MetroPCS. Are they both SPH-L900 (the sprint GN2 variant)? Did you have the exact same rom on both? You're leaving a lot of out, and we're having to guess on the info that's needed to make a good suggestion.
My initial though, is the rom suppose to have the hotspot? It's possible it was removed.
And even if was there, I have no idea if it would work. one, I don't know if Metro offers hotspot service. two, I'm not sure where the hotspot would try to go--metro or sprint.
Click to expand...
Click to collapse
The phones r both exact ssme sprint galaxy note ii sph l900 both on metropcs I download the rom to an sdcard put it in one phone flashed the rom removed the sdcard put it in the other phone and flashed it I have redownload the rim seversl times and flashed it to both phone several times same results everytime. I don't beleave it was removed from rom cause its on one phone but not the other I have wiped everything on both phones before flashing the rom several times this makes no sense to me also reguaedless of be on metro the hotspot app will not go to sprint it will go to metro or where your internet is programmed to (m.I.p. and ppp) ofcouse u have to unlock the hotspot in services.jar for it to work but that's not a problem I have done this many times and flashed hundreds of phones. I honestly am not even interested in the hotspot working just wana know y its on one phone and gone on another

well, that's definitely a quirky situation. Not a clue. I assume it was there with the previous ROM? You may have to format the phone, not just wipe the divack, cache and system. Something from the previous ROM and the new ROM may not be playing nice and somehow is still around despite the wipes you've been doing. Although, I don't think this is the likely scenario, it does occur here and there.
I'm not familiar with all the things involved with taking a phone to a different carrier. I know has more work than just a new ROM.

lovekeiiy said:
well, that's definitely a quirky situation. Not a clue. I assume it was there with the previous ROM? You may have to format the phone, not just wipe the divack, cache and system. Something from the previous ROM and the new ROM may not be playing nice and somehow is still around despite the wipes you've been doing. Although, I don't think this is the likely scenario, it does occur here and there.
I'm not familiar with all the things involved with taking a phone to a different carrier. I know has more work than just a new ROM.
Click to expand...
Click to collapse
Im not sure wat is was but I downgraded to jc then back to mc2 and now its there. Changing carriers takes so settings chages in the nam programming for your mdn, min, mcc, mnc, sid also m.i.p. and ppp for internet and changing the prl. The mms is where people have trouble at for the most part just changing prl will give u talk and txt ( after dealing with getting your meid into the carriers inventory )
Sent from my SPH-L900 using xda app-developers app

sounds like something didn't get removed when you went from whatever to MC2. At least you found a solution.
I didn't think switching carriers on the phone was the most difficult thing to do. I just knew there was more than just changing ROMs. Since I never looked into switching carriers seriously, what I learned about was more casual. I just know it's more difficult with Sprint having the built in SIM cards compared to other phones that do not.

lovekeiiy said:
sounds like something didn't get removed when you went from whatever to MC2. At least you found a solution.
I didn't think switching carriers on the phone was the most difficult thing to do. I just knew there was more than just changing ROMs. Since I never looked into switching carriers seriously, what I learned about was more casual. I just know it's more difficult with Sprint having the built in SIM cards compared to other phones that do not.
Click to expand...
Click to collapse
Actual the Sim being built in makes no difference sprint is the easiest to do Verizon locks the bootloader sprint dont and sprint always uses Samsungs default 16 digit password as for the Sim it doesnt matter u dont use it anyway only the 3g modem u cant get lte with different carriers and yes more to it then a ROM actual I stay on stock ROM most the time but changeing carrier isnt very hard
Sent from my SPH-D710 using xda app-developers app

[Q] Help with Verizon SCH-I535 Phone to use on T-mobile

Hey everyone and thanks for taking the time to read this,
So the story goes as so: After doing some research couple months ago about the capability of the Verizon Galaxy S3 to work on T-mobile, i purchased it, and got it to successfully work on T-mobile(texts, calls, wi-fi). The problem is, i just recently upgraded to include a data plan, and i cannot access the internet, despite taking my phone to my cell phone dealer and contacting T-mobile.T-mobile even sent me a guide to do a mastery reset to factory in hopes to solve this problem, only to tell me afterwards that the phone version SCH-I535 is a "verizon locked-software" and i won't be able to set up an APN to work on the T-mobile network. This was all due to the fact that i was not able to set up a APN for T-mobile, and every time i tried to access it through setting, it brought me to a blank black page with the only option of "Reset to Default". After reading other forums and talking with some people, many have suggested i take this issue to XDA to find a solution.
So, here i am.....Does anyone know if it is possible for me to break/root/ or whatever it is called so i can successfully access the t-mobile network on my phone? Preferably an easier guide since i am sort of a newbie at this sort of stuff.
Thanks again for reading.

Before your Contract change, you were able to receive and make calls successfully with T-Mo Sim right ? Even now you can make calls too correct ? The reason I am asking this is to be able to check if you are really unlocked off of VZW. If you are not unlocked, then that would be the first step.
You are right, the APNs do drive Data Connection. If the stock firmware does not allow you to change APNs then you will have to root. Please post a screen of your Settings > About phone that shows your Rom Version, Baseband and Kernel.

Perseus71 said:
Before your Contract change, you were able to receive and make calls successfully with T-Mo Sim right ? Even now you can make calls too correct ? The reason I am asking this is to be able to check if you are really unlocked off of VZW. If you are not unlocked, then that would be the first step.
You are right, the APNs do drive Data Connection. If the stock firmware does not allow you to change APNs then you will have to root. Please post a screen of your Settings > About phone that shows your Rom Version, Baseband and Kernel.
Click to expand...
Click to collapse
Hey Perseus, thanks a lot for taking the time to reply. I bought the phone in the summer off someone who had verizon. I have always had T-mobile, and considering this phone is GSM, i decided to buy it because it would probably work for T-mobile. I had the phone unlocked, and i am currently using it to make calls, texts, and even use wi-fi with no problem. The only problem at this time is that i recently added a data plan which i cannot currently use. Here is a screen shot of what you have requested.
Thanks again

First try
Settings > More > Mobile Networks > Preferred Network Type.See what it is set to. Change it to LTE/GSM/WCDMA if needed. See the other option System Select as well.
Also separately try the following.
Hit ##DATA# in the Dialer. In the subsequent Menu choose EDIT > OTHERS > LTE APN
If all fails, please Root the phone and then try. The way you go about is
1. Flash a Custom Recovery via Odin. Make sure the version of Custom recovery is for your model D2VZW not D2TMO.
2. Flash a SuperSU zip file via Recovery and then hit fix permissions in the recovery.
Try the APN Settings after that. IF you can actually access them, then set them according to this link.
If all the above fails, I'd suggest a custom Rom for d2VZW.

You will never get 4g trust me I had one... you will just get the E
Sent from my SGH-T999L using xda app-developers app

Ok, so i tried to changed it to LTE and i got no service at all, so i switched it back to Global. I also tried the dialer thing several times, and got the " connection problem or invalid MMI code"
So i guess i am going to have to root the phone? Does anyone know a good video tutorial or written tutorial on how to safely do this? Also, what exactly is rooting?

HackThisThing said:
Ok, so i tried to changed it to LTE and i got no service at all, so i switched it back to Global. I also tried the dialer thing several times, and got the " connection problem or invalid MMI code"
So i guess i am going to have to root the phone? Does anyone know a good video tutorial or written tutorial on how to safely do this? Also, what exactly is rooting?
Click to expand...
Click to collapse
You have to enable the mmi codes to use them. Anyway as stated above your reply you will never get 3g or 4g just edge (seen it personally) which is pretty darn slow.. Not worth it if you ask me and be paying for data.. If you still want to root it and keep trying to add sons check the Verizon forums.. They could probably help you a lot more than on this side of the forums
Sent from my SGH-M919 using Tapatalk

Guys, he is not getting ANY data signal at all. His problem isn't getting the specific icon but being not able to change APNs.
@HackThisThing, you are better off following up on Verizon Device forum. That forum does have a video tutorial for Rooting. Here's forum link.
I don't think you will be able to change APNs without rooting. I checked with a buddy of mine who has the same device as you.
Here's a good answer to What is Rooting ?

Even if you CAN fix it, why bother if you can only get 2G? I'd sell it or trade it for a phone that's more compatible with T-Mobile 's network instead of paying for data and only getting dial-up speeds. I get that solving problems is fun, but OP do you want to live with only 2G?
Sent from my SGH-T999 using Tapatalk

I don't agree with that assessment. Just like the T999L phone, this device will work on LTE Bands just fine. OP just needs to wait for LTE to be rolled out in their area. There's a coverage map and roll out schedule on T-Mo website and the T-Mo News blog.

It's worth a look, but could still leave them with patchy coverage. If it's going to be a while, why wait when it's not hard to just trade the phone? I guess I don't see a reason why hold out on getting a Verizon phone to work when you could just get one that works now with little to no monetary loss. It's just a Verizon S3, not really something worth "waiting" for when they could get the same thing but more functional on their network of choice.
They made an honest mistake and waiting might give them "good enough" service - but other than that they're stuck with dial up speed only and risk bricking a phone they could just trade or sell now.
Maybe I'm just impatient and risk averse.
Sent from my SGH-T999 using Tapatalk

OP has already purchased this VZW version.

Same Problem...
I have the same problem....
How to get any type of data...?

[Q] Cannot update prl after activating service with Straight Talk

Before I describe my issue, I'd like to state that I have searched high and low for answer to no avail. I am using a Sprint Galaxy Note II that has been upgraded to 4.3 stock. It was unrooted when my issue began, but I went ahead and rooted it to try and help my problem.
Two days ago I signed up for Straight Talk Bring your own phone. I entered the provided code which took me to the hands free activation. The activation proceeded successfully (my phone said success) until it forced a prl update. It says it fails (each time it tries the prl update) and immediately reboots the phone. Once booted the activation attempts again and repeats over and over unless I cancel before it gets to the prl update. Strangely enough if I try to make a call it says my phone has not yet been activated, and yet a few times after waiting I can make calls (verified they are coming from my new number), but no data functions. If I then try and complete the activation (the incomplete notification remains), I'm back to square one.
Straight Talk techs have assured me that my phone is active throughout their system and the sprint towers are having no issues. They say other Note II's have been successful. My phone is communicating with the towers as I get the LTE icon during activation.
As an experiment I activated a Samsung Galaxy 3 (never rooted) using the same method and it went through fine. It updated the prl and is now working like a champ. I am now at wits end with my Note. I have faith that all would function if I could get the prl to update and I haven't a clue how to get there from here. I have also been unsuccessful obtaining my MSL even after rooting. A little history on the phone is that it was active with Sprint and it was rooted at 4.1. I returned it to stock to take the 4.3 update.
If anyone can help it would be greatly appreciated.

Sherryluv5 said:
Before I describe my issue, I'd like to state that I have search high and low for answer to no avail. I am using a Sprint Galaxy Note II that has been upgraded to 4.3 stock. It was unrooted when my issue began, but I went ahead and rooted it to try and help my problem.
Two days ago I signed up for Straight Talk Bring your own phone. I entered the provided code which took me to the hand free activation. The activation proceeded successfully until it forces a prl update. It says it fails and immediately reboots the phone. Once booted the activation attempts again and repeats over and over unless I cancel before it gets to the prl update. Strangely enough if I try to make a call it says my phone has not yet been activated, and yet a few times after waiting I can make calls (verified they are coming from my new number), but no data functions. If I then try and complete the activation (the incomplete notification remains), I'm back to square one.
Straight Talk techs have assured me that my phone is active throughout their system and the sprint towers are having no issues. They say other Note II's have been successful. My phone is communicating with the towers as I get the LTE icon during activation.
As an experiment I activated a Samsung Galaxy 3 (never rooted) using the same method and it went through fine. It updated the prl and is now working like a champ. I am now at wits end with my Note. I have faith that all would function if I could get the prl to update and I haven't a clue how to get there from here. I have also been unsuccessful obtaining my MSL even after rooting. A little history on the phone is that it was active with Sprint and it was rooted at 4.1. I returned it to stock to take the 4.3 update.
If anyone can help it would be greatly appreciated.
Click to expand...
Click to collapse
If it's active in their system and if their systems are compatible with your phone then you should be able to update the profile and PRL with no issues. Make sure you're connected to WiFi. There isn't much else you can do short of cloning another phones information onto it but then you won't get LTE. Are you sure it's active on their system and not still attached to Sprint?
Sent from my SPH-L900. Please hit the thanks button if I helped you out!

ecs87 said:
If it's active in their system and if their systems are compatible with your phone then you should be able to update the profile and PRL with no issues. Make sure you're connected to WiFi. There isn't much else you can do short of cloning another phones information onto it but then you won't get LTE. Are you sure it's active on their system and not still attached to Sprint?
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
It is active in their system and unfortunately I don't have another phone to clone. My prl says 2010. It will not update over wifi or LTE. I've tried factory resets (before I rooted). I'm sure it's something with my phone. I just can't pinpoint it. The only progress I have made is that I did manage to extract my MSL. The reps at straight talk said my phone would use sprint towers to activate. Also I'm wondering it my note would use the same prl at the S3 I activated. Thanks so much for trying to help.

You can do *22804 and it should update the prl
Sent from my SPH-L900 using XDA Premium 4 mobile app

Although I may be completely wrong here, I can only go off of experience saying I haven't had a problem updating the profile and PRL or getting service from a "flashed to" carrier, by replacing the original carriers settings. I've tried NUMEROUS Sprint and Boost Mobile PRLs on my phones (I've had a EVO 4G, S2, Nexus, EVO LTE, and Note 2 on Boost...yeah I change phones a lot) and never had an issue getting Boost Mobile service since they use Sprint's towers.
First off, is the Note 2 still active on Sprint? CALL Sprint and verify this. I know if I try to activate a Verizon iPhone 4 on Page Plus that it'll default to Verizon OTA programming and pull that data when I WANT it to pull PP's OTA data via *228 (or *22890). Same thing may be applied here (except with update profile instead of *228). Secondly, is the phone's MEID the same as what you registered on the account? Although I think the L900 is set to show the OEM MEID in settings, I've seen some US Cellular (and maybe Verizon) phones that have shown the OEM MEID in settings but when hooked up in diag mode through the computer showed the real MEID which was completely different. Just something else to consider to make sure you cover everything!
Sent from my SPH-L900. Please hit the thanks button if I helped you out!

ecs87 said:
Although I may be completely wrong here, I can only go off of experience saying I haven't had a problem updating the profile and PRL or getting service from a "flashed to" carrier, by replacing the original carriers settings. I've tried NUMEROUS Sprint and Boost Mobile PRLs on my phones (I've had a EVO 4G, S2, Nexus, EVO LTE, and Note 2 on Boost...yeah I change phones a lot) and never had an issue getting Boost Mobile service since they use Sprint's towers.
First off, is the Note 2 still active on Sprint? CALL Sprint and verify this. I know if I try to activate a Verizon iPhone 4 on Page Plus that it'll default to Verizon OTA programming and pull that data when I WANT it to pull PP's OTA data via *228 (or *22890). Same thing may be applied here (except with update profile instead of *228). Secondly, is the phone's MEID the same as what you registered on the account? Although I think the L900 is set to show the OEM MEID in settings, I've seen some US Cellular (and maybe Verizon) phones that have shown the OEM MEID in settings but when hooked up in diag mode through the computer showed the real MEID which was completely different. Just something else to consider to make sure you cover everything!
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
I tried and it said the number or code is invalid. I will try again when I have a stronger signal. Uploading screenshot of phone connection specs. They look abnormal, but I am not an expert. I am running sprint stock 4.3 rom that was updated with kies. It is rooted but only after issue started happening. The phone number shown is not a number that I have ever had with Spring of Straight Talk

Sherryluv5 said:
I tried and it said the number or code is invalid. I will try again when I have a stronger signal. Uploading screenshot of phone connection specs. They look abnormal, but I am not an expert. I am running sprint stock 4.3 rom that was updated with kies. It is rooted but only after issue started happening. The phone number shown is not a number that I have ever had with Spring of Straight Talk
Click to expand...
Click to collapse
MMM I think I know what's going on here. You need to change your MDN and MIN to something other than 000000xxxx. I think that's forcing a HFA loop every time you boot the phone. Are you familiar with CDMA workshop or DFS CDMA tool? You'll need one of these to possibly fix your problem. Essentially, i think your phone needs to update the profile. This wouldn't be a big issue but I think HFA is strictly sprint and update profile won't work until you get rid of the HFA nag without disabling SprintDM. Check out the two programs I mentioned.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!

ecs87 said:
MMM I think I know what's going on here. You need to change your MDN and MIN to something other than 000000xxxx. I think that's forcing a HFA loop every time you boot the phone. Are you familiar with CDMA workshop or DFS CDMA tool? You'll need one of these to possibly fix your problem. Essentially, i think your phone needs to update the profile. This wouldn't be a big issue but I think HFA is strictly sprint and update profile won't work until you get rid of the HFA nag without disabling SprintDM. Check out the two programs I mentioned.
Sent from my SPH-L900. Please hit the thanks button if I helped you out!
Click to expand...
Click to collapse
This might just work. I have CDMA workshop demo version but am unsure how to conduct the procedure. I really need to get it fixed because now hubby is in the hospital and has the s3. This is my only means of communicating with him when I'm not there. Wish I had the funds to just buy a note 2 that is unlocked but that is not an option right now.

Sherryluv5 said:
This might just work. I have CDMA workshop demo version but am unsure how to conduct the procedure. I really need to get it fixed because now hubby is in the hospital and has the s3. This is my only means of communicating with him when I'm not there. Wish I had the funds to just buy a note 2 that is unlocked but that is not an option right now.
Click to expand...
Click to collapse
If you're on a CDMA network, meaning your carrier didn't give you a SIM card, then having an unlocked phone does nothing for you. Straight talk might be CDMA and GSM though, never looked too much into it. Anyway, you're going to need to dial ##DIAG# in your dialer to bring up the "port" menu. Leave it on PDA and select Qualcomm USB settings or something along those lines. You should be at MTP. Switch it to DM+Modem+ADB. Plug your device into your computer. In device manager you should be able to see which port your computer assigned to it. If you have to, change the port number to be COM25 or under. Go into CDMA WS, connect to the port, send the password: 2012112120131219 and your SPC. Go to NAM1 and read. You should see your MDN and MIN are kind of zeroed out. Replace them with something other than zeros, like MDN: 7737777777 MIN: 3122222222. Reboot your phone. HFA nag should've gone away (if you're on 4.3). Now you should be able to update your profile WITHOUT having to go through Sprint's HFA, and after it grabs everything it needs, you should be on Straight Talk.

ecs87 said:
If you're on a CDMA network, meaning your carrier didn't give you a SIM card, then having an unlocked phone does nothing for you. Straight talk might be CDMA and GSM though, never looked too much into it. Anyway, you're going to need to dial ##DIAG# in your dialer to bring up the "port" menu. Leave it on PDA and select Qualcomm USB settings or something along those lines. You should be at MTP. Switch it to DM+Modem+ADB. Plug your device into your computer. In device manager you should be able to see which port your computer assigned to it. If you have to, change the port number to be COM25 or under. Go into CDMA WS, connect to the port, send the password: 2012112120131219 and your SPC. Go to NAM1 and read. You should see your MDN and MIN are kind of zeroed out. Replace them with something other than zeros, like MDN: 7737777777 MIN: 3122222222. Reboot your phone. HFA nag should've gone away (if you're on 4.3). Now you should be able to update your profile WITHOUT having to go through Sprint's HFA, and after it grabs everything it needs, you should be on Straight Talk.
Click to expand...
Click to collapse
Tried the above but got lost on MIN. (is this the same as MSID?). Didn't find MIN anywhere. This is what I did try and it may have worked..so far, so good. I changed my number via the Straight Talk automated. I then tried the HFA which failed again, so I went in and maually programmed my username, MDN and MSID. I then tried mms and making calls and it worked. I then used root explorer to get rid of HFA by deleting the Sprint update apk. The prl 2010 remained and Sprint Zone says it is current. My only issue is that internet does not work though mms does. That is an issue I am now going to try and tackle. For the record, internet also does not work on the S3 that completed the HFA and prl update successfully. If anyone has any ideas on how to fix that I am open for suggestions. Thanks for your help on this. Please see screenshots..

Yes MIN is the same as MSID. You needed to program the numbers through a CDMA flashing program to get rid of the HFA nag. Now that you've programmed them through the phone...I'm not too sure how you're going to deal with the HFA. Yes, you disabled it, but you also disabled the ability to update the profile which is what you need to do for your data to work...

Success!
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.

Sherryluv5 said:
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.
Click to expand...
Click to collapse
Having the same problem too. Where did you find the old Sprint PRL file? Thanks

Thanks for the info but...
Sherryluv5 said:
Success!! Here's what I did...Found an old Sprint prl file and copied it to sd card. Flashed Digiblur Rom which includes ability to write a prl file in settings. Used root explorer to go in and rename Sprint Update apk so that it would temporarily deactivate. Updated prl to the one on sd card through Digirom. Went back in and "reactivated" Sprint update apk. This activated the HFA immediately and promptly updated the profile and prl to the correct one for sprint (since straight talk BYOP uses those) and voila.. voice, mms and internet are now working perfectly. The issue seemed to be that HFA was changing MSL to 0000006503. Simply correcting it was not enough. I had to roll back the prl to make it update correctly. It updated it back to the 2010 that it was before and updated the profile as well. I like Digiblur Rom but decided to go with Paranoid Android rom instead. I'm loving it. May try a 4.4 next. I'm running Kit Kat on my Nexus Tab and I like it. Until this fiasco, I hadn't rooted my Note 2. Forgot how much fun roms can be. Used to play with them all the time on my HTC Evo. See screenshot of my success; unfortunately showing 3g in screenshot. LTE is spotty in my area so at times I'm reduced to 3g inside my home but I'm on wifi at home anyway.
Click to expand...
Click to collapse
Im happy this worked for you. I believe you have to have an older Android OS to make the trick work. My question is, how can we make this work with a 4.4.2 OS? Much thanks in advance.

BuzzERKINdff said:
Having the same problem too. Where did you find the old Sprint PRL file? Thanks
Click to expand...
Click to collapse
Also would like to know thanks

donclark said:
Im happy this worked for you. I believe you have to have an older Android OS to make the trick work. My question is, how can we make this work with a 4.4.2 OS? Much thanks in advance.
Click to expand...
Click to collapse
My community rom (4.4.2 tw) has the ability to write prl via ##data# then view knot edit).
Sent from my SPH-L900 using XDA Premium 4 mobile app

Samsung Galaxy S3 (L710)
On both of my L710 (S3), the write PRL option was not showing. So ##data# didnt work for me. I had to install this app:
https://www.dropbox.com/s/32jc7i0w2fa2oxw/PRLWUnhide_S3_MA6.zip/
This made it so I was able to see that function.
Here are a bunch of PRL files. I believe the latest is 25018. If its not listed there, just do a search for the zip file:
http://forum.xda-developers.com/showthread.php?p=35576100
I was able to update the Profile and PRL after writing the TEST.prl file.
However, that didnt seem to solve my problem.
No 3g/4g, with HFA loop, with FreedomPOP as my provider (SPRINT MVNO).
I get a "unable to establish a data connection" error MIP:67 on one of the phones when trying to activate.
On the other phone, I get the notice to call customer care (SPRINT).
I believe this to be an ICCID issue, but I cannot confirm this:
https://community.sprint.com/baw/thread/143514

Pull up your dialer, punch in ##72786#. Let the phone go through its little process, then try to update prl and profile.
I am currently using a sprint note 2 on straight talk, had the same issue, and that's what I did to fix it.

Porting T-Mobile ROMs

There seems to already be several T-Mobile Note 4 ROMs available in that section. I have found several references to Verizon Note 4 owners flashing T-Mobile ROMs. What needs to be done to accomplish this and keep the device on the Verizon network?

wy1d said:
There seems to already be several T-Mobile Note 4 ROMs available in that section. I have found several references to Verizon Note 4 owners flashing T-Mobile ROMs. What needs to be done to accomplish this and keep the device on the Verizon network?
Click to expand...
Click to collapse
I'm on US Cellular, so I don't know how different we are from your carrier.
I've got TWRP and the StarKissed kernel, along with the stock ROM running fine on my Note 4. I went ahead and tried flashing T-Mobile ROMs, the only problem is my mobile data.
Unless I flash the StarKissed kernel on top of the stock ROM and dirty flash the T-Mobile ROM, I loose 4G. I can make calls, and receive text, but I can't send text or use the internet.
If I dirty flash, I can make calls and receive text. Still can't send text, but I do get 4G internet for a short time.
I've went into the 4636 menu and toggled CDMA/LTE auto PRL, and toggled the radio and airplane mode, but that doesn't give me mobile data after a clean flash.

Should just need the apn for verizon and should work fine

Would that solve my issue as well, use the US Cellular APN?

I have StarKissed and TWRP and my phone is laggy as hell. It will randomly just pause for a second or so and then catch up. It did it when I typed "phone" in this reply. Driving me crazy. I want to start over with a new ROM and see if it fixes it.

BeauSmith said:
Would that solve my issue as well, use the US Cellular APN?
Click to expand...
Click to collapse
should

oneandroidnut said:
should
Click to expand...
Click to collapse
I added the APN settings, I still have no 4g at all. No internet, can't send texts, can receive, and my current network is 31000, not US Cellular. Any insight?
---------- Post added at 12:14 AM ---------- Previous post was at 12:12 AM ----------
wy1d said:
I have StarKissed and TWRP and my phone is laggy as hell. It will randomly just pause for a second or so and then catch up. It did it when I typed "phone" in this reply. Driving me crazy. I want to start over with a new ROM and see if it fixes it.
Click to expand...
Click to collapse
I don't have lag at all, you should be able to go ahead and flash a T-Mobile rom from there. Just make a backup first.

wy1d said:
I have StarKissed and TWRP and my phone is laggy as hell. It will randomly just pause for a second or so and then catch up. It did it when I typed "phone" in this reply. Driving me crazy. I want to start over with a new ROM and see if it fixes it.
Click to expand...
Click to collapse
My first 4 did this. It was f'n Infuriating and determined to be defective so I swapped. My new One is fine.
Edit: l literally tried any and everything l knew and what was suggested. 1 Knew it was defective but didn't want to wait for a replacement. / finally gave in because it pissed me off so bad I would'nt even try to type or write , even the freaking spen did it.
Hope you get it resolved!

Did anyone get anywhere on what would be necessary to port a TMobile Rom over the the DE Verizon Note 4?