Hello all!
I would like to ask the community for some help...
Recently I acquired a N7105. I really enjoyed some features of touchwiz but I decided to give Cyanogenmod a try. I used their installer for that...
But, after installing it, my Note II never rotated again...
I tried different roms in order to see if it was a rom problem but it never worked again...
I thought of going back to stock but Sammobile dosn't have an updated link for portuguese rom...
Can anyone help me???
You can try and calibrate gyroscope in settings-motion-sensitivity settings-gyroscope calibration.
thats in 4.1 roms not in 4.3
if ya on 4.3 , you may have to go back to 4.1 and do it then flash whatever you want
kinda had same problem with S2 when stuck and not rotate as it should be , had to go back to ICS calibrate.
mjrshark said:
You can try and calibrate gyroscope in settings-motion-sensitivity settings-gyroscope calibration.
thats in 4.1 roms not in 4.3
if ya on 4.3 , you may have to go back to 4.1 and do it then flash whatever you want
kinda had same problem with S2 when stuck and not rotate as it should be , had to go back to ICS calibrate.
Click to expand...
Click to collapse
Just installed Bullet ROM and run calibration... It didn't worked...
Herkatus said:
Just installed Bullet ROM and run calibration... It didn't worked...
Click to expand...
Click to collapse
BTW, I tryed stock with #*0*# and the sensors are not working. Can it be a faulty sensor? It was working before... Can it be a ROM issue? maybe Kernel or something?!?!? I'm becoming desperate...
Herkatus said:
BTW, I tryed stock with #*0*# and the sensors are not working. Can it be a faulty sensor? It was working before... Can it be a ROM issue? maybe Kernel or something?!?!? I'm becoming desperate...
Click to expand...
Click to collapse
you may need to go back to stock rom , the one that came with your phone 1st day
this all i got am sorry if it didnt work for ya , cause as i said before , it happen on my S2 and went back to stock rom as brand new phone , did calibrate as it didnt work with rom i was installed , then worked fine
No one had the same issue as me? Do you think I can install stock rom and take it to a Samsung repair center under warranty?
Can anyone just give me an answer on the following:
Is it possible that sensors are not working due to a "faulty" firmware?
Just to know if it's hardware or firmware...
Herkatus said:
Can anyone just give me an answer on the following:
Is it possible that sensors are not working due to a "faulty" firmware?
Just to know if it's hardware or firmware...
Click to expand...
Click to collapse
No one knows?
Related
I don't update official at&t rom and my phone in off and don't turn on its lcd
what i should to do now
please help me!
oyesk said:
I don't update official at&t rom and my phone in off and don't turn on its lcd
what i should to do now
please help me!
Click to expand...
Click to collapse
hello....
then I recommend that you update the ROM, not sure that the problems have nothing to lose but also prove there are many roms very good and even better than the originals ...
A greeting
Hey friends...
My friend has recently bought a defy in India... It came with eclair...
Now he wants to upgrade to gingerbread... But he doesn't want to root... So can anyone please help me? As I'm a Samsung user, I don't know anything about Motorola devices or how to upgrade them... So I would appreciate a noob friendly guide...
Thanks...
u cannot upgrade to gingerbread w/o rooting...defy has got the official froyo, not gingerbread..
please read the pinned posts if u wish to know how to flash a custom gingerbread rom..
adiles said:
Hey friends...
My friend has recently bought a defy in India... It came with eclair...
Now he wants to upgrade to gingerbread... But he doesn't want to root... So can anyone please help me? As I'm a Samsung user, I don't know anything about Motorola devices or how to upgrade them... So I would appreciate a noob friendly guide...
Thanks...
Click to expand...
Click to collapse
He can update to Froyo, but there is no official Gingerbread update from Motorola for the Defy (and there will never be one).
If he doesn't want to tinker a bit he won't get Gingerbread (there are also 2.3 ports of the Defy Plus that work quite well, but rooting is necessary to install anything like that).
adiles said:
Hey friends...
My friend has recently bought a defy in India... It came with eclair...
Now he wants to upgrade to gingerbread... But he doesn't want to root... So can anyone please help me? As I'm a Samsung user, I don't know anything about Motorola devices or how to upgrade them... So I would appreciate a noob friendly guide...
Thanks...
Click to expand...
Click to collapse
You should read this http://forum.xda-developers.com/showthread.php?t=1216982
Thanks for your replies... one last question...
After rooting and flashing a gb rom, is there a way to go back to fully stock?
Thanks...
adiles said:
Thanks for your replies... one last question...
After rooting and flashing a gb rom, is there a way to go back to fully stock?
Thanks...
Click to expand...
Click to collapse
I still think you got everything you need in ChirmiPlay's post with link just above your last posting
adiles said:
Thanks for your replies... one last question...
After rooting and flashing a gb rom, is there a way to go back to fully stock?
Thanks...
Click to expand...
Click to collapse
You can mess around with your Defy s much as you want, root, install ROMs, flash sbfs... And you can ALWAYS go back to the stock Foyo/ Eclair firmware your Defy came with. Even if something went wrong and the phone doesn't boot anymore, just flash a stock clean Motorola firmware and everything's gone (the ROM you had before, also the root). So also if your Defy has a hardware problem and you want to send it back, just go back to stock before and you don't have to worry about the warranty.
Arjoma said:
You can mess around with your Defy s much as you want, root, install ROMs, flash sbfs... And you can ALWAYS go back to the stock Foyo/ Eclair firmware your Defy came with.
Click to expand...
Click to collapse
I don't think so. if you changed the bootloader version you will be stuck on some higher kernel and can not easily go back.. (that was what happend to epsylon3 - one of the main devs of CM9 for defy) - so if you flashed official froyo - you will not be able to go back to eclair for example. (as is also pointed out here: http://forum.xda-developers.com/showthread.php?t=966537)
A piece of advice: read a lot (here in this forums) before you flash something. It help you not getting in trouble with your phone.
adiles said:
Thanks for your replies... one last question...
After rooting and flashing a gb rom, is there a way to go back to fully stock?
Thanks...
Click to expand...
Click to collapse
There is no point in using defy with the buggy stock Eclair/Froyo ..
If u want to see the complete potential of defy Root it and Install CM7..
and yes you can go back when ever you want but make sure u take the Nandroid backup of the stock ROM that u r using and check whether the official sbf of ur region is available to download.so that u can flash it and restore the nandroid backup .. !!
mearoth said:
I don't think so. if you changed the bootloader version you will be stuck on some higher kernel and can not easily go back..
Click to expand...
Click to collapse
Right, that was the only thing I wasn't thinking about. That is what is usually written in big red letters when there's something about these sbfs. But normally there is no need to change the bootloader version by installing the (not fixed) 2.3.4 sbf.
The only really current reliable options for the Defy imho are CM7.1, MIUI (and some versions based on it) and the Defy+ based ROMs (like MS2Ginger). With none of them you risk to be stuck somewhere - I flashed stock Froyo a dozen times without problems.
Thanks all for your replies....
I'll root and flash cm today....
adiles said:
Thanks all for your replies....
I'll root and flash cm today....
Click to expand...
Click to collapse
Good luck!
I have tried every 4.4 rom for n7100 ( cm11, omni , omni asylum ) but in every rom i don't get network .....
some info.
1. imei is there
2. baseband mj9 (mk4 4.3 rom)
3. flashed via cwm 6.0.4.5
4. signal comes just for a second then go away...
please help......
sachinwadhwa46 said:
I have tried every 4.4 rom for n7100 ( cm11, omni , omni asylum ) but in every rom i don't get network .....
some info.
1. imei is there
2. baseband mj9 (mk4 4.3 rom)
3. flashed via cwm 6.0.4.5
4. singal comes just for a second then go away...
please help......
Click to expand...
Click to collapse
Get SELinux Mode Changer from playstore, set it to permissive, reboot.
sent from my GT-N7105 on Android 4.4.1 SlimKat Beta 1.3
Thanks it worked perfectly
Gandicela said:
Get SELinux Mode Changer from playstore, set it to permissive, reboot.
sent from my GT-N7105 on Android 4.4.1 SlimKat Beta 1.3
Click to expand...
Click to collapse
it didn't worked for me!!!!! same problem.. signal comes for a second and then go away...
any other solution?
MadMango005 said:
Thanks it worked perfectly
Click to expand...
Click to collapse
did you also had the same problem?
If you don't have any network at all, this one helps. If the problem is network going on and off, it probably is something else for which I don't know the solution.
sent from my GT-N7105 on Android 4.4.1 SlimKat Beta 1.3
Gandicela said:
If you don't have any network at all, this one helps. If the problem is network going on and off, it probably is something else for which I don't know the solution.
sent from my GT-N7105 on Android 4.4.1 SlimKat Beta 1.3
Click to expand...
Click to collapse
yes network is there for a second then it shows no service... for around 1 minute then again its back for 1 sec. and so on.
Ask the OP of what ever rom your useing (what he or she wrote the rom to my guess thay a wrote the roms to 4.1.2 not 4.3 so if im right use baseband from 4.1.2 not 4.3
And that should fix your problem as I know cm11 is worte to 4.1.2 as it works good
BIG JD said:
Ask the OP of what ever rom your useing (what he or she wrote the rom to my guess thay a wrote the roms to 4.1.2 not 4.3 so if im right use baseband from 4.1.2 not 4.3
And that should fix your problem as I know cm11 is worte to 4.1.2 as it works good
Click to expand...
Click to collapse
i flashed ddmg1 modem ( 4.1.2 baseband )... now network does not come even for a second.. it shows no service ( imei is there and used both enforcing and permissive).
what to do now?
.
sachinwadhwa46 said:
i flashed ddmg1 modem ( 4.1.2 baseband )... now network does not come even for a second.. it shows no service ( imei is there and used both enforcing and permissive).
what to do now?
.
Click to expand...
Click to collapse
my baseband is n7100xxdmf1 and with the last nightly from cm 4.4 I can phone and text just like stock my imei number is there (phone is working just fine) so I don't know what is up with yours can you do a adb log ( log cat will do it for you if you dont know how) and ill see how or were the problem is
BIG JD said:
my baseband is n7100xxdmf1 and with the last nightly from cm 4.4 I can phone and text just like stock my imei number is there (phone is working just fine) so I don't know what is up with yours can you do a adb log ( log cat will do it for you if you dont know how) and ill see how or were the problem is
Click to expand...
Click to collapse
i downloaded the application alogcat.. for how much time i have to run logs /or pause it? and how / where to send u the .txt file? sorry i dont even know the abc of it or linux .. thats why asking details..
and tell me if i am wrong somewhere..
1. acatlog in my n7100
2. which linux status enforce or permissive?
sachinwadhwa46 said:
i downloaded the application alogcat.. for how much time i have to run logs /or pause it? and how / where to send u the .txt file? sorry i dont even know the abc of it or linux .. thats why asking details..
and tell me if i am wrong somewhere..
1. acatlog in my n7100
2. which linux status enforce or permissive?
Click to expand...
Click to collapse
I just need you to record what happens when you phone or text/network gose down after that save and upload and ill have a look
BIG JD said:
I just need you to record what happens when you phone or text/network gose down after that save and upload and ill have a look
Click to expand...
Click to collapse
here is the logcat ...... please check it .... and thank u for giving me so much time.....
sachinwadhwa46 said:
here is the logcat ...... please check it .... and thank u for giving me so much time.....
Click to expand...
Click to collapse
I just got the drd that you posted ill have a look for you
BIG JD said:
I just got the drd that you posted ill have a look for you
Click to expand...
Click to collapse
ok.. i will wait for your reply..
sachinwadhwa46 said:
ok.. i will wait for your reply..
Click to expand...
Click to collapse
Your logcat is saying your missing a load of Lib form the rom my thought are a bad download of the rom re-download it as the radio libs are mess up if you can get someone to pull libm1/libm2 as both of them are mess up them two lib will get you to call and text if you download a fresh cm11 and gapp it should sort it all out dont mod untill you can confirm that is the only problem and let me know
BIG JD said:
Your logcat is saying your missing a load of Lib form the rom my thought are a bad download of the rom re-download it as the radio libs are mess up if you can get someone to pull libm1/libm2 as both of them are mess up them two lib will get you to call and text if you download a fresh cm11 and gapp it should sort it all out dont mod untill you can confirm that is the only problem and let me know
Click to expand...
Click to collapse
today itself i downloaded fresh cm11 rom (cm-11-20131204-Linaro-n7100.zip) and flashed it first with gapps and then without gapps.... but the same problem persists....
i tried flashing it both cwm 6.0.4.5 and twrp 2.6.3.1 recoveries ... but no success....
some more info - earlier i upgraded to official 4.3 mk4 ..... and rooted it with cf auto root.... as a result i got my knox warranty tripped.... ( at that time i was'nt aware of that).. is this causing the network problem?
network is working fine on official mk4 .... and other custom roms with android less than equal to 4.3...
sachinwadhwa46 said:
today itself i downloaded fresh cm11 rom (cm-11-20131204-Linaro-n7100.zip) and flashed it first with gapps and then without gapps.... but the same problem persists....
i tried flashing it both cwm 6.0.4.5 and twrp 2.6.3.1 recoveries ... but no success....
some more info - earlier i upgraded to official 4.3 mk4 ..... and rooted it with cf auto root.... as a result i got my knox warranty tripped.... ( at that time i was'nt aware of that).. is this causing the network problem?
network is working fine on official mk4 .... and other custom roms with android less than equal to 4.3...
Click to expand...
Click to collapse
It might be that as I haven't done that but I dont know how knox can Mess up the radio libs on you ill have a wee read up on knox to see if it can do that but I do real doubt it but you never know
BIG JD said:
It might be that as I haven't done that but I dont know how knox can Mess up the radio libs on you ill have a wee read up on knox to see if it can do that but I do real doubt it but you never know
Click to expand...
Click to collapse
yes.. i am getting this problem only on 4.4+ roms.. 4.3 and 4.1.2 network working fine
how can i install samsung galaxy grand 2 OS on samsung galaxy grand I9082 ? i really need it specially the samsung camera app
Eng. Mido said:
how can i install samsung galaxy grand 2 OS on samsung galaxy grand I9082 ? i really need it specially the samsung camera app
Click to expand...
Click to collapse
Nope, its hardware/model is different. if you do it, it will BRICK your phone, install Rom for correct device
Why would you risk bricking your phone by installing a different phone's firmware onto it only to get the camera? I suggest you to check out the thing called PLAY STORE, it has dozens of decent camera apps.
i don't think it will break it they are at the same clock speed even i can install the kernel of my mobile only the newer version of software and the new apps that's all i need and all cameras in PLAY STORE u mentioned SUCK
Eng. Mido said:
i don't think it will break it they are at the same clock speed even i can install the kernel of my mobile only the newer version of software and the new apps that's all i need and all cameras in PLAY STORE u mentions SUCK
Click to expand...
Click to collapse
No , it will BRICKED , if you want to BRICKED your phone , flash it with your own risk , and please watch what you are saying
anantalawliet said:
No , it will BRICKED , if you want to BRICKED your phone , flash it with your own risk , and please watch what you are saying
Click to expand...
Click to collapse
could u tell me why it will break if i installed grand 2 OS wz my I9082 kernel ?
Guyz i tried using Odin3 but it failed and refused to download it
i thought about this idea because one of my friends made it before by mistake by installing a very different OS on his mobile and it was only the buttons that didn't work which made him notice that mistake otherwise he wouldn't have noticed
and Thanks all for your help and replays and im still waiting for the best solution here
Eng. Mido said:
could u tell me why it will break if i installed grand 2 OS wz my I9082 kernel ?
Guyz i tried using Odin3 but it failed and refused to download it
i thought about this idea because one of my friends made it before by mistake by installing a very different OS on his mobile and it was only the buttons that didn't work which made him notice that mistake otherwise he wouldn't have noticed
and Thanks all for your help and replays and im still waiting for the best solution here
Click to expand...
Click to collapse
It won't work bro... The best you will get is Odin will refuse to flash it (because of different device signature) or if you manage to flash it then it won't boot (because of VERY different hardware) and the worst thing is after flashing you corrupted everything in your phone beyond repair, not even fixable.
It's like trying to fill your car with airplane petrol, not gasoline, and expect it to work. No, it will damage your car beyond repair.
Be safe bro, try not to do anything illogical like this... Even though we do not want your device get damaged, we still can't force you to NOT do it. Flash at your own risk, because we do not take responsibility.
Eng. Mido said:
i don't think it will break it they are at the same clock speed even i can install the kernel of my mobile only the newer version of software and the new apps that's all i need and all cameras in PLAY STORE u mentioned SUCK
Click to expand...
Click to collapse
Mind your language bro
And don't try it if the devs are telling you not to.
After that if you want to flash it, then do it but at your own risk
Sent from my GT-I9082 using Tapatalk Pro
Eng. Mido said:
could u tell me why it will break if i installed grand 2 OS wz my I9082 kernel ?
Guyz i tried using Odin3 but it failed and refused to download it
i thought about this idea because one of my friends made it before by mistake by installing a very different OS on his mobile and it was only the buttons that didn't work which made him notice that mistake otherwise he wouldn't have noticed
and Thanks all for your help and replays and im still waiting for the best solution here
Click to expand...
Click to collapse
Dont ever do this. if you want the camera, just take the camera app and replace but backup the original one Or wait someone port it
Sent from my GT-I9082 using Tapatalk
so how can i flash it ( on my own risk ) and Odin says ( wrong device signature ) is there a way ?
and about the camera .. i can backup my camera app and install the new one but i tried to find the samsung s4 camera or such and i couldn't find one
Eng. Mido said:
so how can i flash it ( on my own risk ) and Odin says ( wrong device signature ) is there a way ?
and about the camera .. i can backup my camera app and install the new one but i tried to find the samsung s4 camera or such and i couldn't find one
Click to expand...
Click to collapse
Just unpack the grand 2 firmware, DONT flash it
Sent from my GT-I9082 using Tapatalk
black87 said:
Dont ever do this. if you want the camera, just take the camera app and replace but backup the original one Or wait someone port it
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
It won't work either... because Grand 2's camera is made by Android 4.3 API, and thus it won't work on our Grand's stock firmware 4.2.2. Better to wait someone port it...
...
Nothing beats ProCapture. Spend a few bucks...thank me later. Turns the Smartphone camera into a real Digital Camera.
-Paul
Paul_Days said:
Nothing beats ProCapture. Spend a few bucks...thank me later. Turns the Smartphone camera into a real Digital Camera.
-Paul
Click to expand...
Click to collapse
i m also using the same..
naufalhadyan said:
It won't work either... because Grand 2's camera is made by Android 4.3 API, and thus it won't work on our Grand's stock firmware 4.2.2. Better to wait someone port it...
Click to expand...
Click to collapse
I heard android.zealot.fervor is working S4 camera on s2 plus, just wait until its stable and he will publicate it. S2 plus is similar to grand
Sent from my GT-I9082 using Tapatalk
Eng. Mido said:
so how can i flash it ( on my own risk ) and Odin says ( wrong device signature ) is there a way ?
and about the camera .. i can backup my camera app and install the new one but i tried to find the samsung s4 camera or such and i couldn't find one
Click to expand...
Click to collapse
You can't ever flash it unless and until the signature is for galaxy grand. ODIN will always reject it,
If you backed up your camera app, there must not be any app or nobody has posted it yet, wait for someone to port it
[sarcasm]
If you want an awesome (plastic) brick to use as a paperweight you may go ahead
[/sarcasm]
Like @naufalhadyan mentioned you will most probably HARD BRICK your phone
Sent from my GT-I9082 using Tapatalk
Hey, im a Samsung Galaxy Note 2 owner.
I have a problem with my phone after installing OmniROM (kitkat).
My phone worked perfect with OmniROM, but after some months i saw that i just had "emergency call only" in the status bar (at the bottom)
Sometimes, i got "not registered on network":crying:
I tried to wipe all data, and factory reset my phone. Installed OmniROM again, same problem.. But some days i had mobile signal!
I was tired of this after some weeks, i could not call, send sms and could not use mobile data..
I installed the official Android 4.3 firmware from Sammobile and i didnt ROOT my phone, or installed a ROM. same problem
Guys, do anyone of you have a solution?:angel: :laugh:
Thanks in Advance.
Bump.
Hi, I have the same problem too, did you solve yours? and if so, what did you do?
Thanks
imZreed said:
Hey, im a Samsung Galaxy Note 2 owner.
I have a problem with my phone after installing OmniROM (kitkat).
My phone worked perfect with OmniROM, but after some months i saw that i just had "emergency call only" in the status bar (at the bottom)
Sometimes, i got "not registered on network":crying:
I tried to wipe all data, and factory reset my phone. Installed OmniROM again, same problem.. But some days i had mobile signal!
I was tired of this after some weeks, i could not call, send sms and could not use mobile data..
I installed the official Android 4.3 firmware from Sammobile and i didnt ROOT my phone, or installed a ROM. same problem
Guys, do anyone of you have a solution?:angel: :laugh:
Thanks in Advance.
Click to expand...
Click to collapse
dafortal said:
Hi, I have the same problem too, did you solve yours? and if so, what did you do?
Thanks
Click to expand...
Click to collapse
No, looking for help here
imZreed said:
No, looking for help here
Click to expand...
Click to collapse
Hi,
I had this kind of problems a couple months ago.
I extracted the last modem/baseband for my device from stock Samsung ROM and flashed it with Odin. (N7105XXUEMJ9)
It works now much better
Tonus1 said:
Hi,
I had this kind of problems a couple months ago.
I extracted the last modem/baseband for my device from stock Samsung ROM and flashed it with Odin. (N7105XXUEMJ9)
It works now much better
Click to expand...
Click to collapse
I also have this modem.. but i have the same problem as before :/
If it's not kernel or ROM related, it might be hardware
Tonus1 said:
If it's not kernel or ROM related, it might be hardware
Click to expand...
Click to collapse
damn, no warranty then..
Have to buy a new phone? :crying:
I had problems with charging my phone : bought a small spare part (micro usb connector) for 7 € (ouch, 14€ more for delivery), changed it myself in less than half an hour.
And everything works terrible
Just have a look at it, you will sure find the spare part and some useful help on how to do the replacement
--
Sent from Galaxy Note 2 LTE
SlimKat W03
Bump, anyone who can help me
I've recently read that setting SELinux in permissive mode could help. There's an app for it in play store.
Good luck
--
Sent from Galaxy Note 2 LTE
SlimKat W03