I have tried every 4.4 rom for n7100 ( cm11, omni , omni asylum ) but in every rom i don't get network .....
some info.
1. imei is there
2. baseband mj9 (mk4 4.3 rom)
3. flashed via cwm 6.0.4.5
4. signal comes just for a second then go away...
please help......
sachinwadhwa46 said:
I have tried every 4.4 rom for n7100 ( cm11, omni , omni asylum ) but in every rom i don't get network .....
some info.
1. imei is there
2. baseband mj9 (mk4 4.3 rom)
3. flashed via cwm 6.0.4.5
4. singal comes just for a second then go away...
please help......
Click to expand...
Click to collapse
Get SELinux Mode Changer from playstore, set it to permissive, reboot.
sent from my GT-N7105 on Android 4.4.1 SlimKat Beta 1.3
Thanks it worked perfectly
Gandicela said:
Get SELinux Mode Changer from playstore, set it to permissive, reboot.
sent from my GT-N7105 on Android 4.4.1 SlimKat Beta 1.3
Click to expand...
Click to collapse
it didn't worked for me!!!!! same problem.. signal comes for a second and then go away...
any other solution?
MadMango005 said:
Thanks it worked perfectly
Click to expand...
Click to collapse
did you also had the same problem?
If you don't have any network at all, this one helps. If the problem is network going on and off, it probably is something else for which I don't know the solution.
sent from my GT-N7105 on Android 4.4.1 SlimKat Beta 1.3
Gandicela said:
If you don't have any network at all, this one helps. If the problem is network going on and off, it probably is something else for which I don't know the solution.
sent from my GT-N7105 on Android 4.4.1 SlimKat Beta 1.3
Click to expand...
Click to collapse
yes network is there for a second then it shows no service... for around 1 minute then again its back for 1 sec. and so on.
Ask the OP of what ever rom your useing (what he or she wrote the rom to my guess thay a wrote the roms to 4.1.2 not 4.3 so if im right use baseband from 4.1.2 not 4.3
And that should fix your problem as I know cm11 is worte to 4.1.2 as it works good
BIG JD said:
Ask the OP of what ever rom your useing (what he or she wrote the rom to my guess thay a wrote the roms to 4.1.2 not 4.3 so if im right use baseband from 4.1.2 not 4.3
And that should fix your problem as I know cm11 is worte to 4.1.2 as it works good
Click to expand...
Click to collapse
i flashed ddmg1 modem ( 4.1.2 baseband )... now network does not come even for a second.. it shows no service ( imei is there and used both enforcing and permissive).
what to do now?
.
sachinwadhwa46 said:
i flashed ddmg1 modem ( 4.1.2 baseband )... now network does not come even for a second.. it shows no service ( imei is there and used both enforcing and permissive).
what to do now?
.
Click to expand...
Click to collapse
my baseband is n7100xxdmf1 and with the last nightly from cm 4.4 I can phone and text just like stock my imei number is there (phone is working just fine) so I don't know what is up with yours can you do a adb log ( log cat will do it for you if you dont know how) and ill see how or were the problem is
BIG JD said:
my baseband is n7100xxdmf1 and with the last nightly from cm 4.4 I can phone and text just like stock my imei number is there (phone is working just fine) so I don't know what is up with yours can you do a adb log ( log cat will do it for you if you dont know how) and ill see how or were the problem is
Click to expand...
Click to collapse
i downloaded the application alogcat.. for how much time i have to run logs /or pause it? and how / where to send u the .txt file? sorry i dont even know the abc of it or linux .. thats why asking details..
and tell me if i am wrong somewhere..
1. acatlog in my n7100
2. which linux status enforce or permissive?
sachinwadhwa46 said:
i downloaded the application alogcat.. for how much time i have to run logs /or pause it? and how / where to send u the .txt file? sorry i dont even know the abc of it or linux .. thats why asking details..
and tell me if i am wrong somewhere..
1. acatlog in my n7100
2. which linux status enforce or permissive?
Click to expand...
Click to collapse
I just need you to record what happens when you phone or text/network gose down after that save and upload and ill have a look
BIG JD said:
I just need you to record what happens when you phone or text/network gose down after that save and upload and ill have a look
Click to expand...
Click to collapse
here is the logcat ...... please check it .... and thank u for giving me so much time.....
sachinwadhwa46 said:
here is the logcat ...... please check it .... and thank u for giving me so much time.....
Click to expand...
Click to collapse
I just got the drd that you posted ill have a look for you
BIG JD said:
I just got the drd that you posted ill have a look for you
Click to expand...
Click to collapse
ok.. i will wait for your reply..
sachinwadhwa46 said:
ok.. i will wait for your reply..
Click to expand...
Click to collapse
Your logcat is saying your missing a load of Lib form the rom my thought are a bad download of the rom re-download it as the radio libs are mess up if you can get someone to pull libm1/libm2 as both of them are mess up them two lib will get you to call and text if you download a fresh cm11 and gapp it should sort it all out dont mod untill you can confirm that is the only problem and let me know
BIG JD said:
Your logcat is saying your missing a load of Lib form the rom my thought are a bad download of the rom re-download it as the radio libs are mess up if you can get someone to pull libm1/libm2 as both of them are mess up them two lib will get you to call and text if you download a fresh cm11 and gapp it should sort it all out dont mod untill you can confirm that is the only problem and let me know
Click to expand...
Click to collapse
today itself i downloaded fresh cm11 rom (cm-11-20131204-Linaro-n7100.zip) and flashed it first with gapps and then without gapps.... but the same problem persists....
i tried flashing it both cwm 6.0.4.5 and twrp 2.6.3.1 recoveries ... but no success....
some more info - earlier i upgraded to official 4.3 mk4 ..... and rooted it with cf auto root.... as a result i got my knox warranty tripped.... ( at that time i was'nt aware of that).. is this causing the network problem?
network is working fine on official mk4 .... and other custom roms with android less than equal to 4.3...
sachinwadhwa46 said:
today itself i downloaded fresh cm11 rom (cm-11-20131204-Linaro-n7100.zip) and flashed it first with gapps and then without gapps.... but the same problem persists....
i tried flashing it both cwm 6.0.4.5 and twrp 2.6.3.1 recoveries ... but no success....
some more info - earlier i upgraded to official 4.3 mk4 ..... and rooted it with cf auto root.... as a result i got my knox warranty tripped.... ( at that time i was'nt aware of that).. is this causing the network problem?
network is working fine on official mk4 .... and other custom roms with android less than equal to 4.3...
Click to expand...
Click to collapse
It might be that as I haven't done that but I dont know how knox can Mess up the radio libs on you ill have a wee read up on knox to see if it can do that but I do real doubt it but you never know
BIG JD said:
It might be that as I haven't done that but I dont know how knox can Mess up the radio libs on you ill have a wee read up on knox to see if it can do that but I do real doubt it but you never know
Click to expand...
Click to collapse
yes.. i am getting this problem only on 4.4+ roms.. 4.3 and 4.1.2 network working fine
Related
hey guys! Ive flashed synergy rom into my sgh-i747 and ive got bunch of problems... one of them is that my phone model number turned from sgh-i747 into sph-i710 . I have no clue why that happened .please help !!((
oziverson said:
hey guys! Ive flashed synergy rom into my sgh-i747 and ive got bunch of problems... one of them is that my phone model number turned from sgh-i747 into sph-i710 . I have no clue why that happened .please help !!((
Click to expand...
Click to collapse
thats because you flashed the sprint version of the ROM onto your S3. download the AT&T version, full wipe and flash.
but if its possible, i could intall the version of i9300 and it will turn into international version wont it?
oziverson said:
but if its possible, i could intall the version of i9300 and it will turn into international version wont it?
Click to expand...
Click to collapse
NO! it will turn into a brick!!
only flash ROMs that are specifically for your device!
dude, you need to read up on all of this. check out the general forum. if your phone is an i747, then ONLY flash i747 ROMs.
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
http://forum.xda-developers.com/showthread.php?t=2179330
Step 5 in this thread has to do with flashing a ROM. download the CORRECT ROM and Gapps and follow those steps.
After you have completed that and have booted into the device fine (everything's correct and working), follow Step 4 on that thread to create a backup.
---------- Post added at 02:39 PM ---------- Previous post was at 02:38 PM ----------
oziverson said:
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
Click to expand...
Click to collapse
you asked about installing an international ROM. that's what i was replying to. what synergy release did you download?
okay it may seem i go stupid but İ had to flash sprint becuz it wasnt accepting att version. so i did install it and it seems to be workin okay. But i concern about i might be a problem after a while. And I still could not figure out how to make it back. i mean make it back to att version ? can anyone explain that ?
oziverson said:
okay it may seem i go stupid but İ had to flash sprint becuz it wasnt accepting att version. so i did install it and it seems to be workin okay. But i concern about i might be a problem after a while. And I still could not figure out how to make it back. i mean make it back to att version ? can anyone explain that ?
Click to expand...
Click to collapse
the reason i asked what release you were using was because certain versions of synergy dont work well with AT&T. the r290 and higher releases are supposedly working well.
if you used a release listed as r290 or higher then you might want to try a different ROM
http://forum.xda-developers.com/showthread.php?t=1792499 i have flashed the latest version that is r373 . it turned my phone into what it is not but suprisingly it works like a horse
oziverson said:
dude you got me wrong . I know all about it but syneergy has published its att-sprint-us cellular version together. but i think its sprint based but available for all . and it screwed up my phone . I dont know how to come back. ı tried to flash cm att version but i couldnt .
Click to expand...
Click to collapse
Don't mistake me as being "hard/rude"... but "know all about it" means you would've been careful in the first place, along with ways to come back in case of issue.
Like the previous poster said, you should flash only the ROM that's intended for the phone.
Also, a dev might release a ROM for all three carriers, but if you actually look into the OP of that ROM you'll realize that there is a version for each device.
Oh.i took it as my mistake.i shouldnt have said that. But i meant that i knew what he says but yeah ur right.i have no explanation for that. But i still cant see att version separetly ? Could you please link me
oziverson said:
Oh.i took it as my mistake.i shouldnt have said that. But i meant that i knew what he says but yeah ur right.i have no explanation for that. But i still cant see att version separetly ? Could you please link me
Click to expand...
Click to collapse
That's fine. Not an issue esp cos people here only try to help than finger point
Anyways, back to topic. If you do not see an AT&T version, I would suggest checking in the ROM thread itself. And if you still can't find it, it would mean there is no AT&T version. So you might be better off with one of the many AT&T specific ROMs here.
Okay thanks a lot for ur interest.im gonna give a few try more. And id like to say that even if my model nber is changed into sprint, my baseband number still shows that it is at&t . yeah its a bit confusing for me.anyways i will try to make it back and lets see if i can make it.
Problem is solved !!
I solved the problem through changing some parameters in built.prop like ''from d2spr to d2att and I used prop editor app ". http://forum.xda-developers.com/showthread.php?t=1828152 ....this link has the sample for att mobile phones. By this way, i succesfully changed the model number so that I could use att version stock rom to take everything back. I flashed att stock rom through Odin and its done !
Thanks for everbody's help !! sorry for english ,cuz im not native. If anyone has the problem and cant make it through, please let me know and im gonna try to make it clear.
oziverson said:
I solved the problem through changing some parameters in built.prop like ''from d2spr to d2att and I used prop editor app ". http://forum.xda-developers.com/showthread.php?t=1828152 ....this link has the sample for att mobile phones. By this way, i succesfully changed the model number so that I could use att version stock rom to take everything back. I flashed att stock rom through Odin and its done !
Thanks for everbody's help !! sorry for english ,cuz im not native. If anyone has the problem and cant make it through, please let me know and im gonna try to make it clear.
Click to expand...
Click to collapse
You may have the wrong recovery installed on your phone. The synergy thread has specific instructions concerning which version will be installed and it being dependant on your specific recovery. It clearly says that if you get to the installer in the aroma...and your phones model is shown and is wrong...that you should install the phones proper recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Hey member, wanna' flash CyanogenMod on the phone.
There is lot's(and lots) of info' here on this already, though can't find the links as yet..
If any member/s could leave the links need for CyanogenMod download, and all other links, looks like i need to flash google apps too..
Also, is the 2 sim function working now on the ROM? Ideally it would be good to be back on .41.2 rather than kit kat,.
Thanks for any help.
Alex
the custom roms dont have dual-isim support
tutibreaker said:
the custom roms dont have dual-isim support
Click to expand...
Click to collapse
OK Cool, much thanks for the info'.. :good:Shame though about the dual sim thing... Will stay on stock then..
mr_b_alex said:
OK Cool, much thanks for the info'.. :good:Shame though about the dual sim thing... Will stay on stock then..
Click to expand...
Click to collapse
Dual sim is now working fine but still in experimental thanks to the developer for his hard work...so u can install the custom ROM's....
Plz Hit THANKS button if I HELPED U
jackeagle said:
Dual sim is now working fine but still in experimental thanks to the developer for his hard work...so u can install the custom ROM's....
Plz Hit THANKS button if I HELPED U
Click to expand...
Click to collapse
Beauty' thanks. If you have link/s need so I can flash the ROM (currently running on stock 4.1.2) with CWM and links for the google app flash,,
much thanks
mr_b_alex said:
Beauty' thanks. If you have link/s need so I can flash the ROM (currently running on stock 4.1.2) with CWM and links for the google app flash,,
much thanks
Click to expand...
Click to collapse
First you need to upgrade your rom to touchwiz 4.2.2 and then you can flash kitkat or any other custom rom because you can't flash custom rom on 4.1.2 bootloader ... So if your device is not rooted, go to settings and do a software update... Or you can alternatively flash firmware from sammobile... Hope it helps..
Sent from my GT-I9082 using Tapatalk
thegamekiller94 said:
First you need to upgrade your rom to touchwiz 4.2.2 and then you can flash kitkat or any other custom rom because you can't flash custom rom on 4.1.2 bootloader ... So if your device is not rooted, go to settings and do a software update... Or you can alternatively flash firmware from sammobile... Hope it helps..
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
Hey gamekiller, thanks for info'. That's a surprise, I presumed I could flash any rom on stock... Cool thanks.. My grand is rooted, and like I say running stock 4.1.2 with CWM.
Thanks again, and hope to get more info' / tips from members about this subject.
(=
mr_b_alex said:
Hey gamekiller, thanks for info'. That's a surprise, I presumed I could flash any rom on stock... Cool thanks.. My grand is rooted, and like I say running stock 4.1.2 with CWM.
Thanks again, and hope to get more info' / tips from members about this subject.
(=
Click to expand...
Click to collapse
Its better u unroot ur phone and flash official 4.2.2 firmware from samobile and root it back...because most of all the custom ROM's use 4.2.2 has their base so u can hardly find and rom which supports 4.1.2 but S there r some but if u want install cm11 based or AOSP based ROM's u should definitely need to update it to latest Andriod 4.2.2....
Good info' again, will unroot, then flash stock 4.2.2, then flash custom rom CM 11.
Thanks for your info'. I hit thanks!
Has members please got the genuine links for the CM11 flash with dual sim , and goggle app thing (all links I need basically) It's hard to find valid info'.. Want to use dual sim though! Big thanks in advance
Alex
mr_b_alex said:
Good info' again, will unroot, then flash stock 4.2.2, then flash custom rom CM 11.
Thanks for your info'. I hit thanks!
Has members please got the genuine links for the CM11 flash with dual sim , and goggle app thing (all links I need basically) It's hard to find valid info'.. Want to use dual sim though! Big thanks in advance
Alex
Click to expand...
Click to collapse
Here you go http://forum.xda-developers.com/showthread.php?t=2563557 this supports dual sim functionality but its still on experimental our dev's are still working on it thanks to them.. and regarding apps just download gapps from there itself and flash via Recovery... All the best
jackeagle said:
Here you go http://forum.xda-developers.com/showthread.php?t=2563557 this supports dual sim functionality but its still on experimental our dev's are still working on it thanks to them.. and regarding apps just download gapps from there itself and flash via Recovery... All the best
Click to expand...
Click to collapse
Good job jackeagle, thanks for the link...
I know this might sound a stupid question- with the CM11 as it's still new, it's still need work done to fix a few issues, my question is, if I flash this, and root my phone, as its a custom rom CM it get's upgraded automatically , when new fixes/upgrades come out right? It's not like stock firmware rooted where i can not upgrade. Right? I mean the CM 11 gets better with time, and i dont have to keep reflashing right>???
Thanks a lot for your info/s
Alex
mr_b_alex said:
Good job jackeagle, thanks for the link...
I know this might sound a stupid question- with the CM11 as it's still new, it's still need work done to fix a few issues, my question is, if I flash this, and root my phone, as its a custom rom CM it get's upgraded automatically , when new fixes/upgrades come out right? It's not like stock firmware rooted where i can not upgrade. Right? I mean the CM 11 gets better with time, and i dont have to keep reflashing right>???
Thanks a lot for your info/s
Alex
Click to expand...
Click to collapse
First u have to root ur phone and install latest recovery...After flashing this rom u have wipe cache, dalvic cache, factory reset just read instruction carefully and follow it donr skip any step has it can cause major problems or boot loop...No u will not get OTA update in CM coz its not official due to dual sim functionality being experimentally once this issue is solves completely dev's will make it official and then u may get updates via OTA..till then whenever new update is released u have to download full ROM and flash it via Recovery... before installing make backup of current ROM so that if anything goes wrong you can revet back..and its very lite below 250mb.. All the best...
jackeagle said:
First u have to root ur phone and install latest recovery...After flashing this rom u have wipe cache, dalvic cache, factory reset just read instruction carefully and follow it donr skip any step has it can cause major problems or boot loop...No u will not get OTA update in CM coz its not official due to dual sim functionality being experimentally once this issue is solves completely dev's will make it official and then u may get updates via OTA..till then whenever new update is released u have to download full ROM and flash it via Recovery... before installing make backup of current ROM so that if anything goes wrong you can revet back..and its very lite below 250mb.. All the best...
Click to expand...
Click to collapse
Lot's of good info here... Thanks/respect.
After doing more research, I am hankering toward staying on stock, as phone is set up all good, AND not sure if I want some of the current issues on this experimental version... (Though developer doing good work) Will defo' do it when some of the issues get resolved.. Hope I didn't waste your time. Will use your infos' at a later date, when I am reflash CM11 later on..
I looked for stock 4.2.2 flash on sammobile, though there is no downloads for my location (UK) Can I use another location>? Say Germany or India? Or is that liable to soft brick my phone.. ? ? ?
Thanks to you:good:
Don't install the firmware from other region coz each region has its own setting might me bandwidth 2G or 3G so and in some regions its locked so don't try it u might end bricking u r mobile...search u r region only..
Plz Hit THANKS button if I HELPED U
Hi,
Sorry for the noob question, I have N7100 international version with the bad bootloader (associated with 4.3). Did some modding but I would like to install DN3 which I downloaded (DN3_v3.2_by_E-Team_(Vegeta_Edition)). Is it possible with that bootloader ? My version number ends with XXUEMK9
No
Need flash new bootloader first
McGuigew said:
Hi,
Sorry for the noob question, I have N7100 international version with the bad bootloader (associated with 4.3). Did some modding but I would like to install DN3 which I downloaded (DN3_v3.2_by_E-Team_(Vegeta_Edition)). Is it possible with that bootloader ? My version number ends with XXUEMK9
Click to expand...
Click to collapse
andrepws said:
Need flash new bootloader first
Click to expand...
Click to collapse
If your bootloader is MK9 then you don't need to upgrade to latest bootloader which is ND3.Only drawback of being on the older bootloader is that you cannot charge your phone by turning it off it will turn back on.If you don't care about this then stick to MK9 if you want to upgrade to ND3 then you can do that after flashing the ROM.Also my advise for you to is to flash DN3 V5.2 it's the latest release and based on KitKat 4.4.2.
DN3 V5.2 scroll all the way to the bottom for the links,there are two versions full and lite only difference is that lite has bloatware removed such as samsung apps and all that full version has all that but while going through aroma set up you can choose what you would like to keep.
nd3 bootloader to be flashed via pc odin using the bootloader tab only after flashing DN3 ROM.
Thanks very much for your help. Noob question number 2 : how to know what my bootloader is ? And number 3 : I thought the bootloader going with 4.3 was locked and couldn't be changed so I feel lost, could you explain this ? Thanks already !!
Hey, did it, it works flawlessly. Thanks for your help I appreciated it.
McGuigew said:
Hey, did it, it works flawlessly. Thanks for your help I appreciated it.
Click to expand...
Click to collapse
Sorry I just happened to check your reply on the thread since you didn't quote my post while replying.Glad it worked out for you.To know which bootloader you are on download phone info app for samsung from playstore it will tell you that.Regarding 4.3 bootloader from 4.3 onwards all bootloaders knox and they can only be upgraded not downgraded so if a newer bootloader after ND3 arrives you can upgrade to that but you won't be able to go back to ND3.
Just lost my wifi/bt & wifi hotspot after using dn3 5+ for a several days.. I return back to 4.3 custom rom and stock rom hoping to fix this problem but no luck..
Sent from my SM-N9005 using XDA Premium 4 mobile app
singhpratik87 said:
Sorry I just happened to check your reply on the thread since you didn't quote my post while replying.Glad it worked out for you.To know which bootloader you are on download phone info app for samsung from playstore it will tell you that.Regarding 4.3 bootloader from 4.3 onwards all bootloaders knox and they can only be upgraded not downgraded so if a newer bootloader after ND3 arrives you can upgrade to that but you won't be able to go back to ND3.
Click to expand...
Click to collapse
Oh, yeah sorry I'm not used to quoting. I am really happy with this rom except for two things : battery life is a little shorter (didn't install greenify yet), and there this app always stopping when I play music with deezer : soundalive. Changed it for the other FX something I can't remember but now it's OK. Thanks!
Dear Admins and Members,
Hello to everyone, this is my very first post on xda-dev forums, but I am using the forums as guest since many years,
I have GT-N7100 Middle East Variant, most probably the international variant.
I have successfully installed the android 4.4.2 via philz recovery latest version without any problem, here is some info after installation.
Base-band version : N7100XXUFNB4
Kernel version : 3.0.31-764701
[email protected] # 1
Wed Feb 19 16:56:34 KST 2014
Build number
KOT49H.N7100XXUFNB4
THE ANDROID FILE NAME WHICH I USED FOR THIS INSTALLATION :
N7100XXUFNB4_pre-rooted_deodex_(Leak).zip
Now after the installation, every thing is working great, the phone performance is great smooth, the ram usage is fine, the cpu usage is fine,
battery consumption is great, only the problem is I cannot TURN ON WIFI , yes the wifi is not working,
I have checked that my data internet is working, and i can theter/share my internet via bluetooth, but i cannot share wifi hotspot, as it shows error..
I have tried to re install the phone 2-3 times, but still the errors are same.
I dont see any corrupt file system, i have check the os file is also fine, can any one help me ? how i can fix my wifi error ? Please suggest me the method without re installation, I have lot of big games on my phone and i dont want to do the re installation.
Regards
This has already been discussed on many occasions and there is a fix. You would know this if you would have bothered to use search before creating topic.
TheATHEiST said:
This has already been discussed on many occasions and there is a fix. You would know this if you would have bothered to use search before creating topic.
Click to expand...
Click to collapse
Bro I am sorry, as i mentioned i am posting here for this first time, you should help me by directing me towards the links which can help me.
I have use the search but that is not appropriate for my model or phone or OS , can you please reply with the links ?
ArabGeek said:
Bro I am sorry, as i mentioned i am posting here for this first time, you should help me by directing me towards the links which can help me.
I have use the search but that is not appropriate for my model or phone or OS , can you please reply with the links ?
Click to expand...
Click to collapse
Mod Edit
What do you mean searching isn't appropriate for your model???
Use search, read, learn.
TheATHEiST said:
Mod Edit
What do you mean searching isn't appropriate for your model???
Use search, read, learn.
Click to expand...
Click to collapse
I mean to say the search returns the results, which donot work for me, so my problem is different, I donot have any problem with knox or OTA update, because i did a fresh install. its seems that my wifi is not loading the correct drivers for wifi, can you help me ?
ArabGeek said:
I mean to say the search returns the results, which donot work for me, so my problem is different, I donot have any problem with knox or OTA update, because i did a fresh install. its seems that my wifi is not loading the correct drivers for wifi, can you help me ?
Click to expand...
Click to collapse
I don't know which country in middle east you are in but download this stock Saudi Arabia rom from here It should resolve all your issues with wifi.Next root your phone using this Guide.
I am having a similar issue!! Search and found a patch *flashd it via odion.. but that DID not solve the problem!
Installed Omega v29.. still not working.. will try another ROM,maybe that helps
any ideas or suggestions?
Omega sucks man. Wifi keeping disconnecting.
kuromusha38 said:
Omega sucks man. Wifi keeping disconnecting.
Click to expand...
Click to collapse
I've tried MANY ROM sNOW.. Phantom, Omega.. even gave SlimRom a chance.
WIFI and Bluetooth are JUST NOT WORKING!! Its not about Disconnection.. THEY JUST DONT TURN ON (in sammy based roms *#0011* does show wifi to be ok!?
I tried to upgrade bootloader (dr. ketan) to kitkat version (his post #5). Also tried the other "patch" on Omegas first post (by dr ketan i think) using Odin.. that didnt work!!
Anything else!! Feel like throwing this off the balcony.. urghhh
What bootloader are you using right now?
kuromusha38 said:
What bootloader are you using right now?
Click to expand...
Click to collapse
Here is my phone info
Phone Model : GT-N7100
Device Type: t03g
Product Name: t03gxx
County of Origin : Vietnam
Origin CSC Code : XEF
CSC Country : France
Product Code : GT-N7100ZRDXEF
BOOTLOADER VERSION : N7100XXDMB4
BASEBAND VERSION : N7100XXUFNB4
Build Number : KOT49H.N7100XXUFNB4(N7100XXUFNB4)
Android Version : 4.4.2
Hardware / Board : XMM6262
Some one can help how to make wifi work
Tnx /...............
ArabGeek said:
Here is my phone info
Phone Model : GT-N7100
Device Type: t03g
Product Name: t03gxx
County of Origin : Vietnam
Origin CSC Code : XEF
CSC Country : France
Product Code : GT-N7100ZRDXEF
BOOTLOADER VERSION : N7100XXDMB4
BASEBAND VERSION : N7100XXUFNB4
Build Number : KOT49H.N7100XXUFNB4(N7100XXUFNB4)
Android Version : 4.4.2
Hardware / Board : XMM6262
Some one can help how to make wifi work
Click to expand...
Click to collapse
The one i bolded is your culprit.You need to flash MJ5 or ND3 bootloader to get your wifi working.Alternative is flash a custom kernel like Nadia or Agni for 4.4.2 and you'll have working wifi.I'll put links below for each of them.Good luck.
nd3 bootloader
mj5 bootloader
how to flash bootloader via odin
Nadia Kernel
Agni Kernel
So difference between MJ5 and ND3 bootloader is that MJ5 is knox free bootloader so warranty will not be void and you can downgrade back to 4.1.2 if needed but you wont be able to charge your phone by turning it off it wil power back on.ND3 bootloader is KNOXED so warranty will be void,knox will be 0x1(no way to reset it yet) but phone can be charged by turning it off.Also once you flash ND3 bootloader you can only go back as far as 4.3 ROM not 4.1.2.
If you don't decide to upgrade your bootloader and stick to your current one which is MB4 you won't be able to charge your phone.FLashing a custom kernel instead you'd be able to get wifi working again.Also if you flash ND3 bootloader you cannot downgrade your bootlader than means you cant go back to MJ5 or MB4 it will just fail in odin or worse brick your device since bootloaders are flashed onto the motherboard of our phones.So if you flash MJ5 first you can easily upgrade to ND3 later if you feel but not vice versa.Good luck
wifi problem
i'm also facing this problem, already tried the solution above but still grayed wifi/bt and wifi hotspot
den0809 said:
i'm also facing this problem, already tried the solution above but still grayed wifi/bt and wifi hotspot
Click to expand...
Click to collapse
Which Rom did you try and are you on ND3 bootloader now? flash a custom 4.3 rom and see if you get wifi and bluetooth back.
wifi problem
singhpratik87 said:
Which Rom did you try and are you on ND3 bootloader now? flash a custom 4.3 rom and see if you get wifi and bluetooth back.
Click to expand...
Click to collapse
i already did flashing stock 4.3 and also custom rom both 4.3 and 4.4 but still no success..
den0809 said:
i already did flashing stock 4.3 and also custom rom both 4.3 and 4.4 but still no success..
Click to expand...
Click to collapse
Try flashing a custom kernel especially agni or nadia for 4.4.2 on your 4.4 ROM and see if that helps.Cause these two custom kernels have wifi drivers.I am not sure if custom kernel for 4.3 have the same.
wifi problem
singhpratik87 said:
Try flashing a custom kernel especially agni or nadia for 4.4.2 on your 4.4 ROM and see if that helps.Cause these two custom kernels have wifi drivers.I am not sure if custom kernel for 4.3 have the same.
Click to expand...
Click to collapse
same sir still grayed wifi and bluetooth not working..
den0809 said:
same sir still grayed wifi and bluetooth not working..
Click to expand...
Click to collapse
It seems more like a hardware issue to me unless anyone else got any more ideas.Sorry
I will first go with the custom kernels. If this works i will reply here.
Sent from my GT-N7100 using XDA Free mobile app
When i flash the DN3 rom is say (bad) abort
here is what is
1) delete/ factor reset
2) wipe clash
3) divk clash
4) Flash rom - here is what i have problem with
I have download more 10 time it still have same problem
can someone help me out?
Do you have the MK7 baseband version before installing the rom?
vandoc said:
Do you have the MK7 baseband version before installing the rom?
Click to expand...
Click to collapse
I have T889UVUCMK7
CaptainAmerican said:
I have T889UVUCMK7
Click to expand...
Click to collapse
anyone ???
make sure your running newest twrp. 2.8.1.0. that should solve any issues with installing dn3 v5+
OvrDriVE said:
make sure your running newest twrp. 2.8.1.0. that should solve any issues with installing dn3 v5+
Click to expand...
Click to collapse
UPDATE: I have successfully flash DN3_V5+ but i got no signal, baseband, imei? How can i fix it?
CaptainAmerican said:
UPDATE: I have successfully flash DN3_V5+ but i got no signal, baseband, imei? How can i fix it?
Click to expand...
Click to collapse
This is what i got from phone
Model Number : SM-G900F
Android Version: 4.4.2
Baseband : unknown
Build Number : DN3 V5+
Network : Unknown
IMEI : UNknow
IMEISV: Unknown
How to can i flash model without go back to stock? Sorry I am new to rom!
try doing some reading in the dn3 thread. i'm sure your answer is there. read. read some more. then when you think you got it figured out. read some more. then ask questions. far as no imei or baseband. i got no clue on that one. if you were on mk7 and installed it with newest twrp you shouldn't have that problem.
OvrDriVE said:
try doing some reading in the dn3 thread. i'm sure your answer is there. read. read some more. then when you think you got it figured out. read some more. then ask questions. far as no imei or baseband. i got no clue on that one. if you were on mk7 and installed it with newest twrp you shouldn't have that problem.
Click to expand...
Click to collapse
V5.2 is further we go as it right now right? for T899? I know that they have DN3 V5.5 and DN4 which for N7000. The T889 cant use it right?
dn3 v 5.2 n7105 version is what you want.
it works on our note 2 t889
OvrDriVE said:
dn3 v 5.2 n7105 version is what you want.
it works on our note 2 t889
Click to expand...
Click to collapse
V5.5 is not working for us atm and DN4! right?
dn3v4 is old. 5.5 i havn't tryed yet. i run jedi open source. i have ran 5.2 though and know it works
OvrDriVE said:
dn3v4 is old. 5.5 i havn't tryed yet. i run jedi open source. i have ran 5.2 though and know it works
Click to expand...
Click to collapse
I got it to work. But I have other question how can you check if it run on LTE? I couldnt found it !
FOUND IT!
I hope I have fun with this rom. !
turn off wifi, it should show lte over the signal bar
OvrDriVE said:
turn off wifi, it should show lte over the signal bar
Click to expand...
Click to collapse
One Quick Question: How do you change the Model Number:
Mine current at SAMSUNG-SGH i317.
can i change to SGH-T889?
yup you can and it has been explained in another thread on here about dn3 so i won't explain it again here
search is a wonderous thing.
CaptainAmerican said:
UPDATE: I have successfully flash DN3_V5+ but i got no signal, baseband, imei? How can i fix it?
Click to expand...
Click to collapse
need to flash mk7 modem