Develop Bugs

[ACS][How to] Everything EL26 Android 2.3.6

I was requested by MANY people to make this thread, as I did with EK02 and EL13. So I figured I would. Just videos on everything having to do with the latest LEAKED build EL26.
How to install Stock EL26:
http://www.youtube.com/watch?v=4gqMqZpBc7E
Review of Stock EL26:
http://www.youtube.com/watch?v=uqdBFSxxGWs
How to install the EL26 modem:
http://www.youtube.com/watch?v=0uGAamjtNwk
Modem Speed Test: EL13 vs EL26 on the Samsung Epic 4G Touch:
http://www.youtube.com/watch?v=lC4bwKx51CY
Be sure to subscribe to me

Nice thanks! I'll interested to see if others also see an improvement in 3G download speeds on the EL26 modem.

Dchibro said:
Nice thanks! I'll interested to see if others also see an improvement in 3G download speeds on the EL26 modem.
Click to expand...
Click to collapse
I'm getting 3MB down with EL26. I got around 1 MB down with el02 so I thinks its way better
Sent from my SPH-D710 using xda premium

Great video! Love all of your videos, very nice to look at and straight to the point!
Are there any changes to the 4G radio/enhancements to 4G aside from the enhancements to the 3G radio in EL26?

so can i use any rom or do I have to be stock to use this modem?

BigRitz said:
so can i use any rom or do I have to be stock to use this modem?
Click to expand...
Click to collapse
Yep, I just flashed it using Calk's 2.5.1 ROM using Odin

I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?

Thanks man for everything you do, you're a true asset to the XDA community.

mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
yes, im having the same issue...
btw, thanks again for this vid!!!
---------- Post added at 02:30 PM ---------- Previous post was at 02:28 PM ----------
mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
Alright...I just rebooted my phone, updated profile and prl and everything went well...hope this helps!

OP updated
How to install Stock EL26:
http://www.youtube.com/watch?v=4gqMqZpBc7E
Review of Stock EL26:
http://www.youtube.com/watch?v=uqdBFSxxGWs

definately an improvement over the EL13, service in my area is poor at best so I needed this modem for sure.

BigRitz said:
so can i use any rom or do I have to be stock to use this modem?
Click to expand...
Click to collapse
I just flashed the modem alone in CWM, no problems, phone booted up fine.

phatmanxxl said:
I just flashed the modem alone in CWM, no problems, phone booted up fine.
Click to expand...
Click to collapse
how though thought it had be odin

trusted links to modem only tarball ?

BigRitz said:
how though thought it had be odin
Click to expand...
Click to collapse
Calkulin has flashable zips in the development section. Go him!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Flashable zip also posted by qbking77
http://forum.xda-developers.com/showthread.php?t=1352310
Sent from my E4GT

BigRitz said:
how though thought it had be odin
Click to expand...
Click to collapse
Yeah, see post above for flashable zip

[ODIN][TAR] SPH-D710.EL26_CL839620 (EL26 Modem/Kernel/ROM - Full Restore - Rooted)
This package is now available. Included are:
Full restore for EL26 Modem, Kernel, ROM (rooted) - 2 versions, one which resets your User Data. The other preserves your User Data. This will NOT trigger yellow triangle NOR will it increase ODIN flash count. It does NOT suffer from the issue with USB jig functionality being hampered/disabled.
Individual tar.md5 files for EL26 Modem, Kernel, ROM, and Rooted ROM. This is useful for Mac/Linux Heimdall users.

mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
I've never been able to update prl or profile (going back to several phones now) and really don't bother much with it.
Prl is easy to do with software (which I have and know how to do once you have the prl file). As for profile, quick call to C.S to provision account if I need to, otherwise once I have the MSL, I manually program.
Sent from my SPH-D710

I'm wary to flash this. My setup with Blazer ROM on EL13 is giving me great battery life and much better radio performance than my NS4G this replaced.
Think I'll wait a few days for more anecdotal evidence.
Sent from my SPH-D710

[Q] Help! Totally bricked my SG3 SGH-T999 using Mobile ODIN

I was trying to unroot my TMO SG3 SGH-T999 so I can exchange it under warranty. I was following the instructions here, but using mobile ODIN instead of the Windows version, as I am on a Mac (OS X 10.7.5). I found two ROMs on my external SD - Liquid Smooth JB and the Stock ROM - so I thought, let's try to flash the Liquid Smooth JB just for fun, while I'm at it. When I tried to do this before using CWM Recovery, it would load to the Liquid Smooth JB logo screen then freeze, but I could always restart it and go back to the regular ROM - so I was hoping maybe using Mobile ODIN it would work - this was clearly a bad idea.
It's totally bricked now
I can boot it into Download mode, which looks like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then
but that's it.
I installed Heimdall after reading some people post in various forums that they were able to recover from similar situations using it, but I can't find a Heimdall firmware package for the SGH-T999.
And ideas? This is really bad ...
Thanks!

You will have to send it in to be repaired.
Sent from my SGH-T999 using xda app-developers app

Get to a pc and use Odin to flash the stock software
Sent from my SGH-T999 using xda premium
---------- Post added at 01:52 AM ---------- Previous post was at 01:51 AM ----------
If you can get into download mode it's not really bricked
Sent from my SGH-T999 using xda premium

Bricked generally means black screen no response when plugged in or Power cycled or anything.
As people have already pointed out get a Windows machine or boot camp a Windows partition and flash an image with Odin. There is a bunch in the thread in android development.
Best of luck flashing let us know how you get on.

I laughed hard @ LET ME FLASH THE LIQUID SMOOTH WHILE AT IT
, if your route and goal is to revert back to stock rom then how can u flash liquid smooth while AT IT? makes zero sense since odin is just for stock and i never heard of odin flashing custom roms. And guess what? The warranty people got flash counters so figure out a way to reset your download flash counter or they will find its been tampered with.

Get to a Pc! If you can get to download mode you are definitely not hard bricked. Flash a stock firmware and ur good to go!

This thread is hilarious. Flashing a ROM that you know doesn't work. Good job!

Thanks everyone for the Windows Odin suggestion. Will try it and let you know how it goes.

I was able to restore the stock ROM using CWM, which I had forgotten was on the phone (I had been using Volume Down-Home-Power so much I forgot about Volume Up). All in all not one of my prouder moments, but all's well that ends well.
That said, I would like to know why the Liquid Smooth ROM didn't work, and how I could tell a working ROM from a non-working one before flashing it. I did an md5 and it matched.
Yes @psykhotic, I had trouble with this ROM when using CWM, but when I asked Max Lee of http://galaxys3root.com/ - whose instructions I had followed for rooting my phone and installing the Liquid Smooth ROM - his response made it sound like it could have just been a fluke:
Did you do factory reset when I installing liquid? If u end up in a bootloop u have to do a fresh reinstall then wipe cache simple doing wipe after installing will not solve problems. That is a funky thing that happens but you should make a backup rom so u can easily restore if something goes wrong.
Click to expand...
Click to collapse
There was also reason to believe it could have been related to CWM, such that a different software for flashing the ROM might have worked (when I say reason to believe, I mean to someone who isn't an expert in flashing ROMs).

jelpern said:
I was able to restore the stock ROM using CWM, which I had forgotten was on the phone (I had been using Volume Down-Home-Power so much I forgot about Volume Up). All in all not one of my prouder moments, but all's well that ends well.
That said, I would like to know why the Liquid Smooth ROM didn't work, and how I could tell a working ROM from a non-working one before flashing it. I did an md5 and it matched.
Yes @psykhotic, I had trouble with this ROM when using CWM, but when I asked Max Lee of whose instructions I had followed for rooting my phone and installing the Liquid Smooth ROM - his response made it sound like it could have just been a fluke:
There was also reason to believe it could have been related to CWM, such that a different software for flashing the ROM might have worked (when I say reason to believe, I mean to someone who isn't an expert in flashing ROMs).
Click to expand...
Click to collapse
Just a little FYI that I have learned when flashing anything that can cause you to brick. Make sure that you rad all the comments and see if others are having issues with flashing. Make sure you download the flash file for your area. Can't flash a us phone with a Chinese phone. You got very lucky from the sounds of it and am glad to hear that you could still boot it.

Shawnpaul80 said:
Just a little FYI that I have learned when flashing anything that can cause you to brick. Make sure that you rad all the comments and see if others are having issues with flashing. Make sure you download the flash file for your area. Can't flash a us phone with a Chinese phone. You got very lucky from the sounds of it and am glad to hear that you could still boot it.
Click to expand...
Click to collapse
Trying to increase your post count? Lol.
Sent from my SGH-T999 using XDA Premium 4 mobile app

No kidding. Resurrecting extremely old, dead threads isn't what's really considered posting relevant information. There's plenty of brand new questions you can try to help with to get your post count up.
Sent from my SCH-I535 using Tapatalk 4

[Q] Galaxy s3 international rom on sprint

Hey guys this is my first post but I have a galaxy s3 on sprint model l710 that I successfully rooted and flashed a custom ROM to, the phone worked fine and I decided to flash a new rom so I made a backup of the current rom I had (synergyROM) and proceeded to download a new rom that I must of overlooked it to be intended for the international quad core version.
It goes without saying that I messed up and there might not be a fix to my problem but worth a shot!
After I loaded the zip from my CWM menu I selected reboot and now the phone will not turn on at all, not even to downloaded mode!
If anyone has any idea on how to get it to downloaded mode I can take it from there.

If you flashed an international rom on the phone, the phone is hard bricked and there will be no way for you to fix it personally. You can turn it in to Sprint and play dumb saying you downloaded the recent OTA or whatever and that it wouldn't turn back on.

Does anybody read english words anymore?!?!?!
---------- Post added at 06:56 PM ---------- Previous post was at 06:55 PM ----------
porshce2 said:
If you flashed an international rom on the phone, the phone is hard bricked and there will be no way for you to fix it personally. You can turn it in to Sprint and play dumb saying you downloaded the recent OTA or whatever and that it wouldn't turn back on.
Click to expand...
Click to collapse
People should stop doing this. It just drives the costs up for those of us that are responsible enough to do simple things after reading simple instructions.

porshce2 said:
If you flashed an international rom on the phone, the phone is hard bricked and there will be no way for you to fix it personally. You can turn it in to Sprint and play dumb saying you downloaded the recent OTA or whatever and that it wouldn't turn back on.
Click to expand...
Click to collapse
I think your right that might be my only way the funnything is when I did the it the first time I rooted it I put the international rom on there and it would peer cycle but I could enter the download mode and fixed it but this time I didn't have that luxury.
Thank your for the quick response !

Rosco7 said:
I think your right that might be my only way the funnything is when I did the it the first time I rooted it I put the international rom on there and it would peer cycle but I could enter the download mode and fixed it but this time I didn't have that luxury.
Thank your for the quick response !
Click to expand...
Click to collapse
So you're saying you didn't learn your lesson the first time. :facepalm:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You're right, I don't think people should do that but people will end up doing it either way. The fact that you've already made this mistake once though... how about you stick to looking in the Sprint section for roms? That way you don't end up downloading this random stuff... OR how about you stop flashing roms entirely?
Read the first post of rom threads in it's entirety. I have yet to see a rom that does not explicitly say which GS3 it is for in the first page.

View attachment 1745091
Transmitted with a portable device using Xparent Blue Tapatalk 2

Rosco7 said:
Hey guys this is my first post but I have a galaxy s3 on sprint model l710 that I successfully rooted and flashed a custom ROM to, the phone worked fine and I decided to flash a new rom so I made a backup of the current rom I had (synergyROM) and proceeded to download a new rom that I must of overlooked it to be intended for the international quad core version.
It goes without saying that I messed up and there might not be a fix to my problem but worth a shot!
After I loaded the zip from my CWM menu I selected reboot and now the phone will not turn on at all, not even to downloaded mode!
If anyone has any idea on how to get it to downloaded mode I can take it from there.
Click to expand...
Click to collapse
Hurts me to say this but its game over dude. The international version's misc partition is located in the same place as the boot partition for the Sprint variant, so theres no way that that phone is booting up again
Best bet is to take it into Sprint and play it dumb. Good luck :good:
EDIT: Really dude, twice? I think it goes without saying that once you try something and it doesnt work the first time, that doesnt make it more likely to work the second time.
Sent from my PG06100

This is why you always stay in the sprint section when you are looking for new roms to flash. They have all the gs3 forums separated for a reason.....
Sent from my Rooted SPH-L710 w/ a FreeGS3 rom using xda premium

For the hell of it you could try this.. Put it in download mode, even if it doesn't show on the screen and try flashing stock with odin.. You have noting to loose..
http://www.qbking77.com/how-to-unroot/unroot-unbrick-the-samsung-galaxy-s-iii.html

will be rooting my kids mothers phone tomarrow and i have some questions!!?

aight so my kids mother is getting this phone tomarrow off someone and she wants me to root it for her so she can get free hot spot.. im guessing the phone will be on the newest base/firmware.. i kno alot of root methods dont still work so wanted to kno how i will go about rooting this badboy.. root plus custom recovery.. so i can flash a custom rom ect... also are there any good roms that have hot spot working?? sorry for all the question guys! thanks! i have rooted many samsung phones in the past.. the s3 s4.. but never the s2

Look for the app framaroot in Google search, that's the easy way to root the phone
? Powered By My Moga Pro ?

P.Mobile said:
aight so my kids mother is getting this phone tomarrow off someone and she wants me to root it for her so she can get free hot spot.. im guessing the phone will be on the newest base/firmware.. i kno alot of root methods dont still work so wanted to kno how i will go about rooting this badboy.. root plus custom recovery.. so i can flash a custom rom ect... also are there any good roms that have hot spot working?? sorry for all the question guys! thanks! i have rooted many samsung phones in the past.. the s3 s4.. but never the s2
Click to expand...
Click to collapse
IMO, Use a One Click exe file in Wilco's post then you have to add a custom recovery to flash roms. There are also videos on youtube, look for QBKing IMO his are the best.
All custom roms have hotspot working, but if this is a phone for someone else, you should pick something close to stock TW. A lot of the AOSP roms have little things that dont work that keep it from perfect. Unless you want a calls all the time asking why something doesnt work, stick w/ a TW rom

gamepro602 said:
Look for the app framaroot in Google search, that's the easy way to root the phone
? Powered By My Moga Pro ?
Click to expand...
Click to collapse
thanks.. so thats app will root the phone.. but how will i flash a custom recovery

P.Mobile said:
thanks.. so thats app will root the phone.. but how will i flash a custom recovery
Click to expand...
Click to collapse
Mobile Odin, use the .tar file. Or PC Odin, use the .exe file. Recovery is packaged with the kernel on this device, kernels are here-http://forum.xda-developers.com/showthread.php?t=1662295
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bilgerryan said:
Mobile Odin, use the .tar file. Or PC Odin, use the .exe file.
Click to expand...
Click to collapse
sorry im confused.. im seeing i need to flash modems.. some kernel?? what steps will i need to do if i want to root.. flash recovery. then flash a JB custom rom? i see something about some format zip too? can i use odin on my pc i never used mobile odin.. i rooted the s3 a few times and s4.. but this seems a lil more to it

bilgerryan said:
Mobile Odin, use the .tar file. Or PC Odin, use the .exe file. Recovery is packaged with the kernel on this device, kernels are here-http://forum.xda-developers.com/showthread.php?t=1662295
Click to expand...
Click to collapse
can u check your pm bud...

P.Mobile said:
can u check your pm bud...
Click to expand...
Click to collapse
Answered your questions via PM, you'll also need the Hotspot Mod here-http://forum.xda-developers.com/showthread.php?t=1879140 (use the GB27)

Sorry for the intrusion..
Simply visit this thread for the Odin one click. There are four types. Of the four, two preserve data and two reset data. And in the two groups there are Stock and Rooted versions. Personally, I prefer the reset data stock root. (2nd Option/Link). Nice and clean afterwards . Also good to use because your device could by some twist of fate be on an older firmware. Unless you prefer that. This is the latest GB27. Oh yea, QBking root video is on the thread as well.
http://www.sxtpdevelopers.com/showthread.php?t=166
Then you can download this file I bundled up. It is 37MB and includes:
1. Samung USB Drivers 1.5.14.0 (You can download the latest from Samsung.com. (These work for the S-S4,Note-N3) Tested
2. Mobile Odin Lite 3.85 - Tested & Works amazingly. (Also cracked MJ7 on the S4. Woo!)
(Pick your poison!)
(ONLY FLASH THIS IF YOU HAVE A ROM READY TO BE FLASHED RIGHT AFTER! CAUSES BOOTLOOP. RECOVERY ACCESSIBLE ONLY)
3. StockCWM-EL26.tar.tar (It has tar written twice and I forgot to edit it before the upload & NO. Do not extract it. -_-) Flash with Mobile Odin.
(Agat is safe to flash and boot back into your stock rooted device. BUT! Some ROM's require you use EL26 and flash directly to their ROM after install.)
4. AGAT GB27 Recovery 0.5.0.tar
Link! & Someone mirror please? Its getting more difficult to find M.O.L. 3.85. Never know when you need a miracle...j.k lol
https://www.dropbox.com/s/sc6numjydxcuqet/Drivers, Recoveries & M-Odin 3.85 S2.rar
As for the tethering app. Just hit the Play Store with a "android tether" (without quotes) search.

[OTA] NJ2 Update

Thread closed-go here-http://forum.xda-developers.com/showthread.php?p=59767783

First! Lol Thanks for posting this.

Chad The Pathfinder said:
First! Lol Thanks for posting this.
Click to expand...
Click to collapse
did it break root since it's a security update?

6th_Hokage said:
did it break root since it's a security update?
Click to expand...
Click to collapse
it won't flash if you're rooted... sorry to anyone who downloaded, but I forgot to check the md5sum and got a Status 7 when trying to flash so as soon as I figure this out I'll have it uploaded again

bilgerryan said:
it won't flash if you're rooted... sorry to anyone who downloaded, but I forgot to check the md5sum and got a Status 7 when trying to flash so as soon as I figure this out I'll have it uploaded again
Click to expand...
Click to collapse
Ryan i mean if you try and root this stock version after the update?

Does anybody know if this include a better modem?

Soooperstar said:
Does anybody know if this include a better modem?
Click to expand...
Click to collapse
Better is relative. What is better for one person may be worse for another.

6th_Hokage said:
Ryan i mean if you try and root this stock version after the update?
Click to expand...
Click to collapse
No it works the same as ND8.

Sorry guys apparently I never had a good file to begin with. As soon as I do I will post it.

I can confirm that odining Philz and installing superuser Rooted it first try.
Also this can be side loaded adb.
It really runs alot smoother than before the update.
All nd8 mods have worked so far.
Nd8 deodexed Rooted and modded

Robalboa said:
I can confirm that odining Philz and installing superuser Rooted it first try.
Also this can be side loaded adb.
It really runs alot smoother than before the update.
All nd8 mods have worked so far.
Nd8 deodexed Rooted and modded
Click to expand...
Click to collapse
That's probably why it worked for you, I'm getting a Status 7 error in stock recovery.

Has anyone flashed this on NJ3 boost mobile modem. Or do you have the tar available for the NJ3?
Wait sorry I didn't even read lol its just an update. I'm on the NJ3. I'm trying to get back to stock. Hellllp

allrockedout said:
Has anyone flashed this on NJ3 boost mobile modem. Or do you have the tar available for the NJ3?
Wait sorry I didn't even read lol its just an update. I'm on the NJ3. I'm trying to get back to stock. Hellllp
Click to expand...
Click to collapse
The tar isn't available yet, you can try checking Kies

update .
I applied all mods from ND8. the only one that wouldn't work was the Odexed version of the hotspot mod (stuck on samsung screen)
so in turn i used ryans old deodex.zip and deodexed the rom now all works well.
i did switch back to Ktoonz kernel with the settings Ryan has on TW experience rom
im going to ask ktoonz if he can add this new kernel to his tw list of 4.4
So if you deodex after you upgrade. all the ND8 mods work: sound increase, hotspot, custom splash, etc
if you dont deodex than you'll have to use wifi tether or something like that. until someone fixes the odex hotspot
i will say it seems to run smoother and the sound quality is improved alot.

I wanted to go back to stock so I Odin'd back to ND8. I found this thread and thought I'd apply the update right away. When I boot into recovery and choose "apply update from external storage" I get a screen full of garbage. I can't take a picture or screenshot of it, but I'll type out the first several lines:
Code:
Android system recovery <3e>
K0T49H.L710VPUDND8
Choose a package to install:
/sdcard
../
=??b ?&.m? /
b.?v /
_3? ? .? /
?? ?l?.2? /
[and so on all the way down the screen]
If I choose "../" it takes me back to the main screen.
If I use my volume keys to navigate down it goes all the down and off the screen.
Any idea what's going on?

No idea. Looks like your SD is corrupted. If not, I don't know.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My ROMs: Wicked X & Wicked S5 Xperience

I was able to sideload the update via adb.

dewey1973 said:
I was able to sideload the update via adb.
Click to expand...
Click to collapse
YouTube sideload adb from qbking77 then use the same technique to sideload the update. It's worth it
Nd8 deodexed Rooted and modded

Testing full .tar for NJ2 as we type, will report back and upload a link for mediafire.
Stay tuned for general chat topic for a .tar!~
---------- Post added at 10:42 PM ---------- Previous post was at 10:37 PM ----------
Spark91 said:
Testing full .tar for NJ2 as we type, will report back and upload a link for mediafire.
Stay tuned for general chat topic for a .tar!~
Click to expand...
Click to collapse
I mean downloading as we speak >_<

I got the NJ2 system.img unpacked. I zipped it up and will share momentarily. IT'S NOT FLASHABLE! Just the system.
Edit: HERE we go!