Hi everyone, i am trying to downgrade my samsung galaxy s3 t999 from 4.1.2 to 4.1.1 so i could UNLOCK my WIND MOBILE phone and use it with ROGERS sin card. I tried to do the process via ODIN but i am getting this message :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I REALLY NEED TO USE THE PHONE AS SOON AS POSSIBLE !! SOMEBODY HELP ME PLEASE !!
THANKS !
numberone1 said:
Hi everyone, i am trying to downgrade my samsung galaxy s3 t999 from 4.1.2 to 4.1.1 so i could UNLOCK my WIND MOBILE phone and use it with ROGERS sin card. I tried to do the process via ODIN but i am getting this message :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
I REALLY NEED TO USE THE PHONE AS SOON AS POSSIBLE !! SOMEBODY HELP ME PLEASE !!
THANKS !
Click to expand...
Click to collapse
I do believe the firmware you are attempting to flash is not for your device. That firmware is for the SGH-T999, not the SGH-T999v. Hopefully you didn't brick your phone. Download the proper firmware and try again.
It was only the modem that you needed to flash, anyhow. Not the entire firmware package.
my phone works perfectly though, COULD you please tell me which firmware should i download then to do the downgrade ??
You gave conflicting information. You said it's a T999, but also it's from Wind. The Canadian carriers use model T999V. It is different. I'm assuming you have the T999V, in which case you simply just need to download the WIND 4.1.1 firmware for the T999V (build UVLDLL1 If I remember right). It's all in my firmware thread. Link in Sig.
And look under the battery to know what model you have.
Sent from my SCH-I535 using Tapatalk 4
Please read forum rules before posting
Questions and Help issues go in Q&A and Help section
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Help Galax S3 T999V wont restart after downgrade to 4.1.1
Hello
I was trying to down-grade Galaxy S3 (T999V wind mobile) 4.1.2 to 4.1.1.
I used Odin to load the new Firmware, as soon as the phone restarted i got the following message:
"Unfortunately, the process android.process.media has stopped"
what have i done wrong and what should i do in order to fix that?
thank you in advance
Kofiko
kofikom said:
Hello
I was trying to down-grade Galaxy S3 (T999V wind mobile) 4.1.2 to 4.1.1.
I used Odin to load the new Firmware, as soon as the phone restarted i got the following message:
"Unfortunately, the process android.process.media has stopped"
what have i done wrong and what should i do in order to fix that?
thank you in advance
Kofiko
Click to expand...
Click to collapse
This is no problem
wipe you're internal storage in recovery, it's best to do a factory reset in the stock recovery including caches and reboot and enjoy a fresh stock ROM
How to flash the modem only
Aerowinder said:
I do believe the firmware you are attempting to flash is not for your device. That firmware is for the SGH-T999, not the SGH-T999v. Hopefully you didn't brick your phone. Download the proper firmware and try again.
It was only the modem that you needed to flash, anyhow. Not the entire firmware package.
Click to expand...
Click to collapse
Can you please tell me how to flash the modem?
Related
can i flash this rom on my phone samsung galaxy note 2 GT-N7100 xxdmb5???????????????
[ROM][XXDMC3][11-April-2013]★★★★★ Assassin_V5.0 ★★★★★[4.1.2][BUILD,COOK,THEME UR ROM]
Check weather on build.prop in system file,is it written ur device name and other device infos.
If that matches suarly flash flash flash.....
................................................................................................
Check the thread where u got this rom from!
"To err is human, to forgive is divine"
Sent from my SGS II
sanjaykumar.sanjay69 said:
Check weather on build.prop in system file,is it written ur device name and other device infos.
If that matches suarly flash flash flash.....
................................................................................................
Click to expand...
Click to collapse
i don't understand what u mean??????????????
it's mean
It's mean that this rom may be not for your phone. Check it twice. Have you ever flashed this phone before?
santaclaus21 said:
It's mean that this rom may be not for your phone. Check it twice. Have you ever flashed this phone before?
Click to expand...
Click to collapse
yes i flash before allince rom and i use this and my G S 3 flash altima rom
YES
I checked the rom out and yes, you should be able to flash the rom using Odin.
It's this ROM right?
http://forum.xda-developers.com/showthread.php?t=2134867
Should be able to flash it just fine on the N7100
MclDev00 said:
I checked the rom out and yes, you should be able to flash the rom using Odin.
Click to expand...
Click to collapse
The link looked like a recovery flashable zip to me, not an Odin flashable file.
how to root galaxy note 2 with latest firmware DMC3 twrp mod
jann_ali said:
how to root galaxy note 2 with latest firmware DMC3 twrp mod
Click to expand...
Click to collapse
Sorry, but wrong section mate! Please report this thread to the moderators and have it moved here:
http://forum.xda-developers.com/forumdisplay.php?f=1792
"To err is human, to forgive is divine"
Sent from my SGS II
please help
I cant flash a firmware to my samsung note 2 using odin. Please help me.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
joeydizon said:
I cant flash a firmware to my samsung note 2 using odin. Please help me.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i have the same problem i read some time ago it can be wrong one file or version of the file is not compatible with odin. unfortunetly my phone just died and dont do anything (sorry for bad eanglish)
Hello,i recently got Note 8.0 N5100 with official 4.2.2 and i decided to root it. I used CF-Auto-Root and followed instructions, downloaded newest drivers and everything went well in odin 3.07 but after odin finished i got stuck wirh samsung galaxy note logo and nothing happens now.
what shall i do now, can anybody please help me!!!!!!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Problem solved. I exidently when i was using search in cf auto root website downloaded wrong cf file for p5100 instead of n5100.
miloslavc said:
Hello,i recently got Note 8.0 N5100 with official 4.2.2 and i decided to root it. I used CF-Auto-Root and followed instructions, downloaded newest drivers and everything went well in odin 3.07 but after odin finished i got stuck wirh samsung galaxy note logo and nothing happens now.
what shall i do now, can anybody please help me!!!!!!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-espresso10rf-espresso10rfxx-gtp5100.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Problem solved. I exidently when i was using search in cf auto root website downloaded wrong cf file for p5100 instead of n5100.
Click to expand...
Click to collapse
Your not the only one who had this problem... I which the mod would shut down the thread pushing rooting via flashing.
Too many newbies are having issues flashing.
I recommend saveroot.zip. It leaves your device's counter untouched. Also it is 100% safe.
Now what to do with your device since it is stuck at the Samsung logo.
You can do what I do for stuck screens. Power on, and hold only the up volume key. Keep it held until boot screen is finished.
If that does not work, go into recovery and clear cache and reboot.
If none of the options work, you may have flashed with an incompatible file, there are three versions and only one is specific to your device. you can try re-flashing with a good file.
saveroot
Hello,
I am having a heck of a time finding this. Would you please point me in the right direction?
Thx!
gooberdude said:
Your not the only one who had this problem... I which the mod would shut down the thread pushing rooting via flashing.
Too many newbies are having issues flashing.
I recommend saveroot.zip. It leaves your device's counter untouched. Also it is 100% safe.
Now what to do with your device since it is stuck at the Samsung logo.
You can do what I do for stuck screens. Power on, and hold only the up volume key. Keep it held until boot screen is finished.
If that does not work, go into recovery and clear cache and reboot.
If none of the options work, you may have flashed with an incompatible file, there are three versions and only one is specific to your device. you can try re-flashing with a good file.
Click to expand...
Click to collapse
Hello guys, so I have this Galaxy Grand Duos I9082 with what appears to be a soft brick, so I got it in Download Mode, got a stock ROM and tried to flash it with Odin but it keeps failing. I tought I was not using a proper stock ROM but since there are no roms for my region (South America) I was using a Spain region rom. Does this has anything to do with the failure? My galaxy is the international version I think.
I used 4.2.2 and 4.1.2 with no success. Also I used the .pit file and still no success.
Changed USB cable, USB port, but Odin still fails at flashing.
What do I do now? I think I'm in a dead end now
LOG:
<ID:0/017> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMF3_I9082OXXAMF1_I9082XXAME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Set PIT file..
<ID:0/017> DO NOT TURN OFF TARGET!!
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> sboot.bin
<ID:0/017> NAND Write Start!!
<ID:0/017> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks a lot in advance folks.
"Solved"
Since none of you guys here could give me an answer I took the phone to Tech Support (it was his fate) and it has the eMMC Chip damaged so it needs a replacement. If anybody is having the same problem then this may be the reason.
I post this so everyone knows in case you're getting trouble with flashing your Grand.
So, "problem solved"
no power. please help.
after flash the rom v37. it black out..
what should I do? please help me.. thanks
mCryMe said:
after flash the rom v37. it black out..
what should I do? please help me.. thanks
Click to expand...
Click to collapse
Are you able to boot into recovery? If so, your phone is soft-bricked. Simply restore a backup of a working ROM. ?
Hi folks, I am trying to either install CF auto root or install TWRP recovery for my Verizon Galaxy note 4. I have the SM-N910V so I thought I wouldn't have any problems. When trying CFs auto root it fails and the log looks like this,
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltevzw-trltevzw-smn910v.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I installed an update from samsung a few days ago. Could this be my problem? Do I need to factory reset to get the unlocked bootloader back?
skateguy1234 said:
Hi folks, I am trying to either install CF auto root or install TWRP recovery for my Verizon Galaxy note 4. I have the SM-N910V so I thought I wouldn't have any problems. When trying CFs auto root it fails and the log looks like this,
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-trltevzw-trltevzw-smn910v.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I installed an update from samsung a few days ago. Could this be my problem? Do I need to factory reset to get the unlocked bootloader back?
Click to expand...
Click to collapse
If you don't have a Developer Edition then you cannot root. Only the Developer Edition Note 4 can be rooted, not the retail version. If you did not buy your Note 4 directly from Samsung, not Verizon, then you have the retail version, not the Developer Edition. If your phone was advertised as "unlocked" and you did not buy it from Samsung, then you have a carrrier "unlocked" phone, not a bootloader unlocked phone.
jpcalhoun said:
If you don't have a Developer Edition then you cannot root. Only the Developer Edition Note 4 can be rooted, not the retail version. If you did not buy your Note 4 directly from Samsung, not Verizon, then you have the retail version, not the Developer Edition. If your phone was advertised as "unlocked" and you did not buy it from Samsung, then you have a carrrier "unlocked" phone, not a bootloader unlocked phone.
Click to expand...
Click to collapse
Thanks a lot for the reply. I have read on a few sites that the model SM-N910V was indicative of the developer model. I guess that is not the case? If not I hope someone is able to figure out a root solution. Is it possible that updating the samsung software from NI1 to NJ5 could lock the bootloader?
front
front
skateguy1234 said:
Thanks a lot for the reply. I have read on a few sites that the model SM-N910V was indicative of the developer model. I guess that is not the case? If not I hope someone is able to figure out a root solution. Is it possible that updating the samsung software from NI1 to NJ5 could lock the bootloader?
Click to expand...
Click to collapse
Yes if you're using the wrong firmware. There is a version that is safe for the Developer Editon in that it does not "touch" the bootloader. Look in the Android Development section of this forum.
skateguy1234 said:
Thanks a lot for the reply. I have read on a few sites that the model SM-N910V was indicative of the developer model. I guess that is not the case? If not I hope someone is able to figure out a root solution. Is it possible that updating the samsung software from NI1 to NJ5 could lock the bootloader?
Click to expand...
Click to collapse
The retail device's bootloader is already locked.
Help ... I HAVE THE DEVELOPERS EDITION and now I'm getting this exact same message/problem!
I need to send this back in exchange or update. Have had sim card issues with 4 S4's now this being the 5th. With changing the sim cards many times.
So i need to format back to stock and send in.
Can't seem to find the rom or process to get it done with odin or w/e is needed
http://forum.xda-developers.com/showthread.php?t=2816508
Kriptik210 said:
http://forum.xda-developers.com/showthread.php?t=2816508
Click to expand...
Click to collapse
thanks can i use this with odin or clean install inside recovery?
Use Odin, will recommend full wipe if coming from custom rom.
Pp.
PanchoPlanet said:
Use Odin, will recommend full wipe if coming from custom rom.
Pp.
Click to expand...
Click to collapse
K its only going back to stock to send back to carrier. But you cant clean install with odin so it has to be done in recovery no?
Odin will clean install because you don't need a custom recovery to install, all recovery can do is reset.
Once you Odin stock after factory reset you loose root and you get stock recovery.
Pp.
PanchoPlanet said:
Odin will clean install because you don't need a custom recovery to install, all recovery can do is reset.
Once you Odin stock after factory reset you loose root and you get stock recovery.
Pp.
Click to expand...
Click to collapse
So factory reset via inside rom ?
Then odin flash stock
reboot
all done?
That should do it.
Pp.
Doesn't work for me
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
and it wouldn't let me do it in recovery either
Try latest nk2 firmware, otherwise you will need a pit file to fix it.
Pp.
I eventually found a pit and still got this
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
*edit
didn't see that last post but i just tried it and still an error so what now
trying using the following
M919UVUFNK2_M919TMBFNK2_M919UVUFNK2_HOME.tar.md5
M919UVUFNH7_M919TMBFNH7_M919UVUFNH7_HOME.tar.md5
AHHHH I SEE NOW
In Odin up top it shows what phone it is. I flashed a rom and it was not my carriers but I9505 S4
So how to I get the roms i just posted to flash over this to make it back to a T-Mobile variant?
This is the specs I am on if it helps
Baseband
M919UVUFNK2
Kernel
3.4.105-GoogyMax3_GE5-v1.2.7
[email protected] #26
PanchoPlanet said:
Try latest nk2 firmware, otherwise you will need a pit file to fix it.
Pp.
Click to expand...
Click to collapse
I'm familiar with the files for: the modem (modem.bin) and the LTE modem/or WiFi driver (non-hlos.bin); but I'm not familiar with a pit file. What is a pit file?