Develop Bugs

Need Help. Bought N7100 and Download mode showing SHV-E250S and Bricked

So I just bought a second hand Note 2 N7100. It was rooted and philz recovery was installed and about device was showing n7100 and the back of the battery says n7100 too.
So I tried to install a custom rom and after installing it got stuck into bootloop.
So I decided to install stock 4.4.2 rom so I downloaded and then I went to my Download mode. Its chinese type and the main thing comes
In the download mode it says
Product Name: SHV-E250S
Current Binary: Custom
System Status: Custom
Know Warranty Void:1
AP SWREV: A2
What should I do now?
I tried flashing n7100 firmware through Odin v3.09 and it says
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100OJVFOD1_N7100XXUFOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! <ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Seriously need help with this.
EDIT:
I just downloaded the firmware for SHV-E250S and it got flashed. What the heck was that
That guy cheated with me? or some other fault?

Someone look into this please.
HELP!!!

Can someone reply to my issue?

Try talking to the guy, sounds like you got scammed maybe.

Stupid question, sorry, but I bricked my phone and I'm stumped...

So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!

hereisalex said:
So I followed the instructions here i found on google by searching "how to how to root s6 edge plus", second link down... and it was a bad idea. Now my phone will boot, and show the lock screen for a second or two, and then just reboot. So I'm stuck in a bootloop. I'm fairly new to the android rooting scene (I've been jailbreaking iPhones sice 2007). What do I do? I tried restoring the default firmware in Odin but it didn't work. HELP!
Click to expand...
Click to collapse
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk

Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Misterjunky said:
Your phone is not bricked.
Best bet is to odin flash the official stock firmware and then go into recovery mode.
When in recovery do a factory reset.
Then reboot the phone.
After doing the above the phone will work fine.
Good luck,
Have a nice evening.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse

hereisalex said:
Thank you for responding. I've done that, and it's failing. I tried to post a screenshot but XDA won't allow me since I"m a new user. So here's a transcript:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Perhaps I'm not using the right file? I have 20150409165121\G925TUVU1AOCG_G925TTMB1AOCG_G925TUVU1AOCG_HOME.tar.md5 if that means anything.
Thank you again for your help.
Click to expand...
Click to collapse
Here is the correct firmware and download link for the S6 EDGE+ phone.
https://www.androidfilehost.com/?fid=24052804347822287
Good luck.
Sent from my SM-G928T using Tapatalk

Misterjunky said:
Here is the correct firmware and download link for the S6 EDGE+ phone.
==========================================================
Good luck.
Sent from my SM-G928T using Tapatalk
Click to expand...
Click to collapse
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.

hereisalex said:
Thank You! Now, if I do get my phone back up and running, how can I root it? I don't need any custom ROM or anything, I just want root permissions.
Click to expand...
Click to collapse
Yes you can, follow the link below for full instructions .
http://forum.xda-developers.com/s6-edge-plus/development/arter97-kernel-galaxy-s6-edge-plus-t3189913
Good luck..
Sent from my SM-G928T using Tapatalk

It's still not working. It will boot up, play the T-Mobile jingle, and show me the lock screen, and then reboot after about half a second. This repeats indefinitely. Please help?

I think my phone is bricked

Hey all I'm not sure what happened but I reflashed to stock KitKat and while I did that I installed all the newest updates to receive Lolipop and after I finished that I downloaded CF-AutoRoot. I rooted it and got stuck with a bootloop so I went into the stock recovery and erased everything. So I repeated step one by reflashing KitKat and now Odin is giving me an error and it isn't working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I'm about to pull my hair out

gfp11289 said:
Hey all I'm not sure what happened but I reflashed to stock KitKat and while I did that I installed all the newest updates to receive Lolipop and after I finished that I downloaded CF-AutoRoot. I rooted it and got stuck with a bootloop so I went into the stock recovery and erased everything. So I repeated step one by reflashing KitKat and now Odin is giving me an error and it isn't working.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANIE_N910PSPT1ANIE_N910PVPU1ANIE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? I'm about to pull my hair out
Click to expand...
Click to collapse
You have a dev edition or retail?

Retail I believe
Could I just go into TWRP, go to my computer, put on a ROM, transfer it to my phone, and then install something from there?
I don't really care about stock at this point

gfp11289 said:
Retail I believe
Could I just go into TWRP, go to my computer, put on a ROM, transfer it to my phone, and then install something from there?
I don't really care about stock at this point
Click to expand...
Click to collapse
If you're able to get in TWRP you do not have retail version. Do you have any ROMs or TWRP backups on an SD card? The CF-autoroot part is confusing me I don't remember ever having to use that.

jcip17 said:
If you're able to get in TWRP you do not have retail version. Do you have any ROMs or TWRP backups on an SD card? The CF-autoroot part is confusing me I don't remember ever having to use that.
Click to expand...
Click to collapse
Nope none. I tried downloading about 4 different stock roms and they all give me the same error in Odin.
I'm able to get into TWRP and Custom OS but that's it. The phone just keeps restarting after the Note 4 logo

gfp11289 said:
Nope none. I tried downloading about 4 different stock roms and they all give me the same error in Odin.
I'm able to get into TWRP and Custom OS but that's it. The phone just keeps restarting after the Note 4 logo
Click to expand...
Click to collapse
You can't flash stock roms (.zip files)in ODIN. They need to be .tar files
First check under your battery it should say developer device. If not you have a retail version. If you do have developer edition try to go through these steps and hopefully you will be okay. .
http://forum.xda-developers.com/note-4-verizon/development/how-to-custom-recovery-root-t2923340
If you have a retail version try this.
http://forum.xda-developers.com/not...nt/verizon-note-4-firmware-odin-file-t2926827
You said you accepted the lollipop update when you were on Kit Kat?

I need the Sprint firmware but it doesn't say anything about Developer or Retail under the battery
Model: SM-N910P

gfp11289 said:
I need the Sprint firmware but it doesn't say anything about Developer or Retail under the battery
Model: SM-N910P
Click to expand...
Click to collapse
Woh don't do anything I said. You're in the wrong forum
Try to seek help here
http://forum.xda-developers.com/note-4-sprint​

Oh shoot I didn't even realize I was in the Verizon forum. Sorry

gfp11289 said:
Oh shoot I didn't even realize I was in the Verizon forum. Sorry
Click to expand...
Click to collapse
Hey on the bright side you're a senior member now :highfive:
Hope you get your phone working !

jcip17 said:
Hey on the bright side you're a senior member now :highfive:
Hope you get your phone working !
Click to expand...
Click to collapse
Me too
Do you have any ideas possibly? If I'm able to get into TWRP and I put a ROM on a micro sd card, couldn't I just install it from there?

gfp11289 said:
Me too
Do you have any ideas possibly? If I'm able to get into TWRP and I put a ROM on a micro sd card, couldn't I just install it from there?
Click to expand...
Click to collapse
Yes definitely just do an advance wipe and wipe data, system, cache, and dalvik cache before. But don't confuse TWRP with the stock recovery. TWRP is a custom recovery.

Brick recovery update?

Hi guys my step son has proper messed up his phone he's somehow tripped knox and is stuck in a bootloop. I cannot seem to find a current recovery from brick solution for the latest firmwares. The only guide I can find seems to be before knox was implemented I've been looking round and tried one or two guides with no success. I'm really stuck here and am pleading for any help I can get.
Thank you for your help

tell some detailts ..problem is bootloop ? tried Flashing official firm thru odin ?!

Iskander_mal said:
tell some detailts ..problem is bootloop ? tried Flashing official firm thru odin ?!
Click to expand...
Click to collapse
Yes I've tried flashing the official firmware through Odin and I get a massive fail h t t p ://imageshack.com/a/img924/4719/Ou2z5N.jpg
That's what is displayed on the screen

Here's the Odin log
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNE1_N7100BTUFNE1_N7100XXUFND3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> system.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you ever so much for taking the time to reply

galaxy note5 sm-n920a stuck in odin download mode cant get any firmware to flash

Hello I have a AT&T- samsung galaxy note5 SM-N920A. This phone has never been rooted.
The previous owner tried to factory rest it. howerver it had factory reset protection.they gave phone to me.
I couldn't bypass frp because,im guessing it may have had recent firmware update. so i tried to flash phone back to older
firmware. With odin. so i could bypass frp. but i get FAIL! in odin after 10-20 seconds. i would like to flash it back to factory firmware if possiable.
Here is what happens in odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any help would be greatly appriciated. thanks in advance

slickd0gg said:
Hello I have a AT&T- samsung galaxy note5 SM-N920A. This phone has never been rooted.
The previous owner tried to factory rest it. howerver it had factory reset protection.they gave phone to me.
I couldn't bypass frp because,im guessing it may have had recent firmware update. so i tried to flash phone back to older
firmware. With odin. so i could bypass frp. but i get FAIL! in odin after 10-20 seconds. i would like to flash it back to factory firmware if possiable.
Here is what happens in odin.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1207)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any help would be greatly appriciated. thanks in advance
Click to expand...
Click to collapse
It's not possible to go back all the way because it'll just get blocked by the bootloader! If your problem is only FRP then have the previous owner log in on the phone using his or her Google account.. That's all you have to do and if you are going to write back saying you can't get a hold of the previous owner then you'll need to call AT&T for help because FRP is a security feature for stolen phones and people on xda aren't really keen on helping get around that.

MrMike2182 said:
It's not possible to go back all the way because it'll just get blocked by the bootloader! If your problem is only FRP then have the previous owner log in on the phone using his or her Google account.. That's all you have to do and if you are going to write back saying you can't get a hold of the previous owner then you'll need to call AT&T for help because FRP is a security feature for stolen phones and people on xda aren't really keen on helping get around that.
Click to expand...
Click to collapse
thankyou for your response, i see the need for concern, however i can assure these have not been stole.
my brother in law owns small company. He supplies the people that work for him a phone. however if they quit or get fired they have to return the phone. so what he did was tried to factory reset by holding power+volume up+home button. I was able to talk him out of a few of these same make/model galaxy note 5.
This morning using odin i was able to flash Android 7.0 Nougat firmware successfully to the phone... however FRP still remains

slickd0gg said:
thankyou for your response, i see the need for concern, however i can assure these have not been stole.
my brother in law owns small company. He supplies the people that work for him a phone. however if they quit or get fired they have to return the phone. so what he did was tried to factory reset by holding power+volume up+home button. I was able to talk him out of a few of these same make/model galaxy note 5.
This morning using odin i was able to flash Android 7.0 Nougat firmware successfully to the phone... however FRP still remains
Click to expand...
Click to collapse
FRP stands for factory reset protection.. And if that's the case you can call AT&T and they can remove it for you from their systems. It's as simple as a phone call.