Develop Bugs

Guys i fear my phone has bitten the dust;(

This morning i just flashed the new froyo rom that the xda guys had made and it said if you was experiencing any led problems to go into adb and delete a file.
I went into adb and mounted the system, but didnt delete a file, when i came out i didnt exit, i just pulled the usb cable,
is it possible that my system is still mounted and is stuck?
when i rebooted i am stuck on a boot loop from the first htc screen and i have no way of getting into recovery...
I dont think this is a usb brick as i didnt flash anything,
im not sure what to do now;(
I cant even flash a new ruu from fastboot;(
Hope you guys can help
JD

Almost the same hapened to med yesterday, but i was able to reflash.
Take out the batery and start into recovery directly, wipe before flash.
Good luck, i hope it works out for ya.

Im not sure if this is a usb brick or not? I think with usb bricks you can still flash a ruu from fastboot, where as i cant;(

infexis said:
Almost the same hapened to med yesterday, but i was able to reflash.
Take out the batery and start into recovery directly, wipe before flash.
Good luck, i hope it works out for ya.
Click to expand...
Click to collapse
I cant get into recovery;( at all;(

getting a device not found when trying to get into recovery, i am completly stuck;( painful times;'((

You can USB-Brick without any flashing.
Can you boot into android or do you get stuck at the loop every time?
Tried booting without the SD?

Rudolfje said:
You can USB-Brick without any flashing.
Can you boot into android or do you get stuck at the loop every time?
Tried booting without the SD?
Click to expand...
Click to collapse
i get stuck at the first htc screen boot loop, cant boot without sd neither;(

i also cant flash a ruu from fastboot;(

also im not sure how to go about unbricking if its unbricked, the instructions are not very clear on modaco, and also i was using the brafrorom4 and im not sure how i would go about making a mtd0.img with that rom.
Completly bamboozled;(

JupiterDroid said:
i also cant flash a ruu from fastboot;(
Click to expand...
Click to collapse
And trying to flash a stock ROM from the built-in recovery (the one accessible with volume-up and power from the HBOOT's red triangle screen)?

Just to be clear, with the device turned off you can't get into HBOOT holding vol. down and turning it on?

@ngel said:
And trying to flash a stock ROM from the built-in recovery (the one accessible with volume-up and power from the HBOOT's red triangle screen)?
Click to expand...
Click to collapse
I have not tried that, how would i go about doing that mate?

JupiterDroid said:
I have not tried that, how would i go about doing that mate?
Click to expand...
Click to collapse
Just boot your Desire with volume-down pressed and once in the HBOOT, select RECOVERY; then, as the red triangle screen appears press volume-up and power until you reach a blue recovery console that has a "Flash from sdcard" menu entry.
Copy a stock ROM to your sdcard and flash it.
I've never tried that, but I readed that the console is able to flash HTC signed stuff, so give it a try...

EddyOS said:
Just to be clear, with the device turned off you can't get into HBOOT holding vol. down and turning it on?
Click to expand...
Click to collapse
i can get into hboot fine

JupiterDroid said:
i can get into hboot fine
Click to expand...
Click to collapse
how can i flash a ruu from the phone? i thought it had to be done from windows?

JupiterDroid said:
how can i flash a ruu from the phone? i thought it had to be done from windows?
Click to expand...
Click to collapse
Two posts above.

@ngel said:
Two posts above.
Click to expand...
Click to collapse
cheers mate, will give it a try now

it wont flash, it has a signature failure

JupiterDroid said:
it wont flash, it has a signature failure
Click to expand...
Click to collapse
Are you trying a stock, untouched HTC ROM?

@ngel said:
Are you trying a stock, untouched HTC ROM?
Click to expand...
Click to collapse
yes i beleve so, i had to rename it to update.zip to be able to flash,
i tried to flash the PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.zip rom

my phone stuck on huawei logo help

as soon as u switch it off it comes back on and just freezes at the logo .nyone help how do I fix this

Try flashing a new firmware. Take out the SD card put any rom in the dload folder and then reboot doing the three button combo (volume + volume - and the power button) you need to have stock recovery for this to work....
Sent from my HUAWEI P6-U06 using Tapatalk

jimbo77 said:
Try flashing a new firmware. Take out the SD card put any rom in the dload folder and then reboot doing the three button combo (volume + volume - and the power button) you need to have stock recovery for this to work....
Sent from my HUAWEI P6-U06 using Tapatalk[/QUOTE
sorry I don't even know whats stock recovery so am sure I don't have .is there any other way I can fix my fone
Click to expand...
Click to collapse

No, there is no other way. What happens when you press those three buttons? Does your phone boots to recovery?
Sent from my HUAWEI P6-U06 using Tapatalk

jimbo77 said:
No, there is no other way. What happens when you press those three buttons? Does your phone boots to recovery?
Sent from my HUAWEI P6-U06 using Tapatalk
Click to expand...
Click to collapse
nothing it just goes to the Huawei logo

iscaac said:
nothing it just goes to the Huawei logo
Click to expand...
Click to collapse
If you don't know what stock recovery is, you probably have it, so you should just follow his instructions
Nvm... I saw you attempted to flash twrp already. Just flash a stock recovery. Enough tutorials on here
Sent from my P6-U06 using XDA Premium 4 mobile app

lootjelo said:
If you don't know what stock recovery is, you probably have it, so you should just follow his instructions
Nvm... I saw you attempted to flash twrp already. Just flash a stock recovery. Enough tutorials on here
Sent from my P6-U06 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
don't see link for tutorials or u mean here on site

I have the same problem,my phone (p6-u06) stays at huawei logo and the problem is i cant shut it off,it keeps restarting draining the batteri and the phone is geting very hot.I have tried to update from sd card but: E:failed to mount / sdcard (no such file or directory). Tried whit 3 diferit sd cards and the same and almost any firmwire i could find.I've tried to flash twrp recovery whit fast boot and doesnt work,wont flash.
The phone is rooted and unlocked.Had installed HYD52ROM_P6_V5_KK and wantend to swap to V6 and unwillingly made an internal storage wipe and since the phone is this way .If anyone can help please give me an idea what to trie next.I tried fastboot and installed stock recovery but now error: divece not found. Pls help me!!!

ciprian-ro said:
I have the same problem,my phone (p6-u06) stays at huawei logo and the problem is i cant shut it off,it keeps restarting draining the batteri and the phone is geting very hot.I have tried to update from sd card but: E:failed to mount / sdcard (no such file or directory). Tried whit 3 diferit sd cards and the same and almost any firmwire i could find.I've tried to flash twrp recovery whit fast boot and doesnt work,wont flash.
The phone is rooted and unlocked.Had installed HYD52ROM_P6_V5_KK and wantend to swap to V6 and unwillingly made an internal storage wipe and since the phone is this way .If anyone can help please give me an idea what to trie next.I tried fastboot and installed stock recovery but now error: divece not found. Pls help me!!!
Click to expand...
Click to collapse
Did you try to restart your phone pressing vol up and down together
Sent from my P6-U06 using xda app-developers app

husen4u said:
Did you try to restart your phone pressing vol up and down together
Sent from my P6-U06 using xda app-developers app
Click to expand...
Click to collapse
I tried,in goes in stock recovery but i cant do anythuing just reboot now,says no file on sdcard and a big FAIL on the screen.

ciprian-ro said:
I tried,in goes in stock recovery but i cant do anythuing just reboot now,says no file on sdcard and a big FAIL on the screen.
Click to expand...
Click to collapse
Format Your SDcard And Put Back And Try Again.

firmware
husen4u said:
Format Your SDcard And Put Back And Try Again.
Click to expand...
Click to collapse
hi husen4u.
how u doing? I'm using p6 almost two month.right now using B125, I tried kitkat beta but dnt see much improvements. last month I tried to flash CLEANROM then phone was stuck logo after I tried hard by pressing power and volume + - buttons together. but nothing happened then I run to service center. I want to try now HYD52ROM V5 but afraid if again stuck on logo. please can u guide me the easiest way to flash HYD52ROM and if stuck again wht will be solution? my purpose is to custom rom for mainly battery performance. As I use before Lenovo s820, its battery power was same ascend p6 but its last longer than ascend p6 while browsing and youtub. can you suggest some plz

husen4u said:
Format Your SDcard And Put Back And Try Again.
Click to expand...
Click to collapse
did that whit 2 sdcards format to fat 32 and put dload/UPDATE.APP and the same,no file found
downloaded stock from huawei site,didnt work.I think when i gave the wipe internal storage everythin on the internal storege was wiped.
I wonder if there is a way to put a rom direct on the internal storage or to mount a recovery or an image to the internal storage so the phone would start and shut down(it's on for 2 days and i am afraid if i let the battery drain it will not start at all).

Do you boot it with your PC connected to phone? SDcard will fail when still connected to USB

edward0181 said:
Do you boot it with your PC connected to phone? SDcard will fail when still connected to USB
Click to expand...
Click to collapse
no,the phone was not connected to the pc,the SDcard was formated and only the dload folder whit UPDATE.APP
does somebody know a method to update/install firmware via usb cable or some other method???(fastboot wont work... device not found)

the same is hapennig with my phone p6 and I dont know what else to do

i have the same problem with my mate7.it keeps restarting on its own.if i slot in the sd card to install new firm ware,it gets stuck completely until it goes off when the battery gets flat.

Hi guys,
I have the same problem. and also it does not go to recovery mode!!! even by restarting and pressing power, vol up and down together!!!
I used adb and flash boot.img and recovery.img and i think i did a mistake.
Please kindly give me a hand!!!
Thank you

Me To i have the same
Me To i have to same problem but my phone connected on pc when i use the power boutton he show the logo and gone and get a black screen and the connected to pc with name (ANDROID)

Look like no solution yet, I also have the same problem. Stuck at the logo and phone vibrating.

[Q] {Q} Xperia S hard break

Hi,
I've really big problem and i hope that here i get sugestion...
1, I try flash new ROM to my phone. I copy ROM to "SD card" but in wrong version.
After this I into Flashtool get new Kernel and new ver. of TWRecovery. Then I go to recovery and start flashing as every time before...
2, But now I'm in bad sittuation. I can only get into recovery... When i want to go to bootloger, i can't. Every time when I go to bootloger from recovery, i'm back in recovery. Every time is phone reaction the same as I hold power up button+vol. up. And I'm only in recovery.
When I want transfer some ROM to phone, I can't. Cose when I Mount USB massstorage I see phone as "Elementary sys device". I have install ABD device drivers...
Changelog I can't get you, cose it's in "SD card"...
3, Please, Show me "the way" out of this sh*t... I use HTC HD2 few years, all time flashing. Now I use Xperia S for 3 yr. All time flashing. But now I'm in a wrong way ind can't get my phone to standby
Thank you for answers!

magntwo said:
Hi,
I've really big problem and i hope that here i get sugestion...
1, I try flash new ROM to my phone. I copy ROM to "SD card" but in wrong version.
After this I into Flashtool get new Kernel and new ver. of TWRecovery. Then I go to recovery and start flashing as every time before...
2, But now I'm in bad sittuation. I can only get into recovery... When i want to go to bootloger, i can't. Every time when I go to bootloger from recovery, i'm back in recovery. Every time is phone reaction the same as I hold power up button+vol. up. And I'm only in recovery.
When I want transfer some ROM to phone, I can't. Cose when I Mount USB massstorage I see phone as "Elementary sys device". I have install ABD device drivers...
Changelog I can't get you, cose it's in "SD card"...
3, Please, Show me "the way" out of this sh*t... I use HTC HD2 few years, all time flashing. Now I use Xperia S for 3 yr. All time flashing. But now I'm in a wrong way ind can't get my phone to standby
Thank you for answers!
Click to expand...
Click to collapse
Boot phone into recovery, then run following command to copy the ROM to phone memory.
Code:
adb push /path/to/ROM.zip /sdcard/
Then flash the ROM via recovery!

Mirhawk said:
Boot phone into recovery, then run following command to copy the ROM to phone memory.
Code:
adb push /path/to/ROM.zip /sdcard/
Then flash the ROM via recovery!
Click to expand...
Click to collapse
You mean into terminal command? I need to get phone into fasboot. then I can do what I want.. Now it's dead phone... It was happend when I want to flash yours ROM. But i miss one step, flash boot.img

magntwo said:
You mean into terminal command? I need to get phone into fasboot. then I can do what I want.. Now it's dead phone... It was happend when I want to flash yours ROM. But i miss one step, flash boot.img
Click to expand...
Click to collapse
Recovery is TWRP. The one with menu of install, wipe and all. You need to boot into that and use the adb on PC.

Mirhawk said:
Recovery is TWRP. The one with menu of install, wipe and all. You need to boot into that and use the adb on PC.
Click to expand...
Click to collapse
Yes, I'm in TWRP, exactly v.2.8.0.1, from topic of your ROM. Bud now I can't connect phone via ABD drivers. I try it via apps and two ways via Commans window.
I'm only in TWRP. I can't get to fastboot, I can't install ROM now, phone reaction is the same as I hold power up+vol up button.
I need one of two ways... 1,get phone connected with PC via fastboot to flash new kernel, boot.img and at least your ROM
2,get phone connected with PC via mass storage, to get some old ROM, flash it and get to fastboot...
For example:

magntwo said:
Yes, I'm in TWRP, exactly v.2.8.0.1, from topic of your ROM. Bud now I can't connect phone via ABD drivers. I try it via apps and two ways via Commans window.
I'm only in TWRP. I can't get to fastboot, I can't install ROM now, phone reaction is the same as I hold power up+vol up button.
I need one of two ways... 1,get phone connected with PC via fastboot to flash new kernel, boot.img and at least your ROM
2,get phone connected with PC via mass storage, to get some old ROM, flash it and get to fastboot...
For example:
Click to expand...
Click to collapse
You cannot use fastboot command in recovery, You can use the adb commands only. Did Yo try pushing the ROM to phone?

Mirhawk said:
You cannot use fastboot command in recovery, You can use the adb commands only. Did Yo try pushing the ROM to phone?
Click to expand...
Click to collapse
Yes, I was... I have in "sd card" save my last ROM+gapps. As I wrote, two ways when I try it. One is Fail of flash by TWRP, second fall of TWRP during flash.
Ty for "want to help"!

magntwo said:
Yes, I was... I have in "sd card" save my last ROM+gapps. As I wrote, two ways when I try it. One is Fail of flash by TWRP, second fall of TWRP during flash.
Ty for "want to help"!
Click to expand...
Click to collapse
Ah apologies, got lost while replying.
Anyways, lets start from basic. Can You try un-installing and installing the fastboot drivers? Because I suspect that's why You are not able to enter into fastboot mode.

Mirhawk said:
Ah apologies, got lost while replying.
Anyways, lets start from basic. Can You try un-installing and installing the fastboot drivers? Because I suspect that's why You are not able to enter into fastboot mode.
Click to expand...
Click to collapse
I try it, but no way.. The same.

magntwo said:
I try it, but no way.. The same.
Click to expand...
Click to collapse
Can You try using a different PC/Laptop?

Mirhawk said:
Can You try using a different PC/Laptop?
Click to expand...
Click to collapse
I tryed my Vaio laptom and Dell laptom from my work. Both wrong... I'm completlly helplessly in this moment.

magntwo said:
I tryed my Vaio laptom and Dell laptom from my work. Both wrong... I'm completlly helplessly in this moment.
Click to expand...
Click to collapse
Just a sec, what combination do You use to go into bootloader? Power up+volume up? That is not what Yo do, You disconnect the phone from cable, and then turn off the phone. Then just press volume up, and connect the phone. No other button is needed to be pressed.

Mirhawk said:
Just a sec, what combination do You use to go into bootloader? Power up+volume up? That is not what Yo do, You disconnect the phone from cable, and then turn off the phone. Then just press volume up, and connect the phone. No other button is needed to be pressed.
Click to expand...
Click to collapse
Thank you. This is the way.. Now I'm in fastboot.... I gona flash kernel 2.8.0.1, then boot.img from your ROM and finally the ROM

magntwo said:
Thank you. This is the way.. Now I'm in fastboot.... I gona flash kernel 2.8.0.1, then boot.img from your ROM and finally the ROM
Click to expand...
Click to collapse
Finally! Follow the procedure here to flash a Kitkat/Lollipop ROM.

Mirhawk said:
Finally! Follow the procedure here to flash a Kitkat/Lollipop ROM.
Click to expand...
Click to collapse
Re: one more...
Quote:
Originally Posted by magntwo
Sorry, again...
As I wrote, I have in this moment folder with everything, nAOSP 5.0 b12, gapps-lp-20141109-signed, boot-carbon_3-11-14, beta SU v2.44, kernel v2.
As you know, two things, get this folder to phone and get fastboot, in this moment i'll be there, where I want to be
Ty!
Hi, can You please post it in a thread and tag Me? The messages kinda confuse Me!
.
Click to expand...
Click to collapse
Here we're... Thank you.

magntwo said:
Here we're... Thank you.
Click to expand...
Click to collapse
Apologies, might have missed out Your quote earlier. So You now have ROM and other stuff in the phone. What problem are You facing Now? Also I would recommend the new released version b14c with kernel from b14d of nAOSP.

Mirhawk said:
Apologies, might have missed out Your quote earlier. So You now have ROM and other stuff in the phone. What problem are You facing Now? Also I would recommend the new released version b14c with kernel from b14d of nAOSP.
Click to expand...
Click to collapse
simply... I get to bootloader as we wrote last. Then I flash kernel, and phone died. Now I can only charge or see a Sony logo. I can ONLY this now. no buttons helps, no different cable/slot/PC helps... I'M only in charging mod, after turn on only logo see. no TWRP, no bootloger.

magntwo said:
simply... I get to bootloader as we wrote last. Then I flash kernel, and phone died. Now I can only charge or see a Sony logo. I can ONLY this now. no buttons helps, no different cable/slot/PC helps... I'M only in charging mod, after turn on only logo see. no TWRP, no bootloger.
Click to expand...
Click to collapse
So You can't even go into bootloader now? That's weird and also makes this a bit complicated! Because You need to be able to go into bootloader mode to flash a new kernel which has recovery. Hope You are pressing only volume while connecting phone to PC. Drivers are fine as You were able to flash a kernel earlier. Which Kernel did You flash first? If You are able to go into bootloader, then flash this kernel via fastboot mode.

Mirhawk said:
So You can't even go into bootloader now? That's weird and also makes this a bit complicated! Because You need to be able to go into bootloader mode to flash a new kernel which has recovery. Hope You are pressing only volume while connecting phone to PC. Drivers are fine as You were able to flash a kernel earlier. Which Kernel did You flash first? If You are able to go into bootloader, then flash this kernel via fastboot mode.
Click to expand...
Click to collapse
Ok, I flash it. But I really can't into bootloader. If I hold vol button, conn cable only red, charging light... Now I really don't know what else.

magntwo said:
Ok, I flash it. But I really can't into bootloader. If I hold vol button, conn cable only red, charging light... Now I really don't know what else.
Click to expand...
Click to collapse
So You were able to flash the kernel I gave? Then You should be able to boot into CWM recovery. The Kernel logo will be of a Android bot.

[Q] Stuck in download mode / boot-image

Hi guys,
could anyone please help, I've been playing around quite a lot with rooting and flashing, but now I'm stuck with a problem I can't solve...
Device
Galaxy Tab S 8.4 WIFI (SM-T700 klimtwifi)
Starting point
Flashed CM12 , with CF root and TWRP
Everything ok, but had some trouble with wifi and root, so I wanted to flash a new rom.
Problem
Tried flashing another rom (can't remember if it was AROMA or BlissPop...), but the flashing got stuck.
Now I can only access Download-mode, not Recovery and normal boot gets stuck in the white Samsung-logo, I get past first screen and some other Samsung-animation.
What I've tried
Access to Recovery, not working (I have a stock-backup on internal SD)
Flashed stock image via Odin (T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5). Should be on right now, but no change in working.
Re-flash TWRP via Odin (tar-file)
Have I missed something? Any problem with going back and forth between Android 4 and 5?

F-B said:
Hi guys,
could anyone please help, I've been playing around quite a lot with rooting and flashing, but now I'm stuck with a problem I can't solve...
Device
Galaxy Tab S 8.4 WIFI (SM-T700 klimtwifi)
Starting point
Flashed CM12 , with CF root and TWRP
Everything ok, but had some trouble with wifi and root, so I wanted to flash a new rom.
Problem
Tried flashing another rom (can't remember if it was AROMA or BlissPop...), but the flashing got stuck.
Now I can only access Download-mode, not Recovery and normal boot gets stuck in the white Samsung-logo, I get past first screen and some other Samsung-animation.
What I've tried
Access to Recovery, not working (I have a stock-backup on internal SD)
Flashed stock image via Odin (T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5). Should be on right now, but no change in working.
Re-flash TWRP via Odin (tar-file)
Have I missed something? Any problem with going back and forth between Android 4 and 5?
Click to expand...
Click to collapse
After flashing the stock image, factory reset in recovery again.

But I can't get into recovery, even after flashing stock...

To elaborate, pressing vol up + power + home does not have any effect. Pressing vol down + home + power gives downloading mode as normal.

F-B said:
To elaborate, pressing vol up + power + home does not have any effect. Pressing vol down + home + power gives downloading mode as normal.
Click to expand...
Click to collapse
Sounds like one of the partitions is damaged, its strange because when you flash the stock firmware it relays all the partitions, just to verify you downloaded one of the big factory images from sammobile.com that's 1.6gb big, then flashed with Odin the extracted tar file...also you might not have a custom recovery installed if you have so vol up and home n power wouldn't work......
Maybe your way out of this is going the other way, flash a custom recovery through Odin, then get into that and use it to install ironrom which is like stock but cleaner.

F-B said:
To elaborate, pressing vol up + power + home does not have any effect. Pressing vol down + home + power gives downloading mode as normal.
Click to expand...
Click to collapse
Try pressing power +vol down and up together+home and then as soon as screen goes dark/black press power+vol up+home hopefully that will get you into recovery.

Have you edited to vold.fstab file
---------- Post added at 01:15 PM ---------- Previous post was at 01:07 PM ----------
If you have edited the vold.fstab file then try to flash a stock rom via odin with the pit file of your device.

F-B said:
But I can't get into recovery, even after flashing stock...
Click to expand...
Click to collapse
Just to elaborate when flashing stock through Odin it wipes your custom recovery and root...hence why you need to use auto root again through Odin.

Cheers guys for your inputs! I'll only get my hands on the tab this evening, so I'll test your solutions then and report back-
maxal said:
Try pressing power +vol down+home and then as soon as screen goes dark/black (just before you enter download mode) press power+vol up+home hopefully that will get you into recovery.
Click to expand...
Click to collapse
Thanks, have to try this!
pdolton2000 said:
Sounds like one of the partitions is damaged, its strange because when you flash the stock firmware it relays all the partitions, just to verify you downloaded one of the big factory images from sammobile.com that's 1.6gb big, then flashed with Odin the extracted tar file...also you might not have a custom recovery installed if you have so vol up and home n power wouldn't work......
Maybe your way out of this is going the other way, flash a custom recovery through Odin, then get into that and use it to install ironrom which is like stock but cleaner.
Click to expand...
Click to collapse
Yeah, flashed T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5 2,4gb
Tried flasing TWRP, no difference. Maybe here's the timing as well...
max86533 said:
Have you edited to vold.fstab file
---------- Post added at 01:15 PM ---------- Previous post was at 01:07 PM ----------
If you have edited the vold.fstab file then try to flash a stock rom via odin with the pit file of your device.
Click to expand...
Click to collapse
No clue about vold.fstab, so I seriously hope I haven't edited it
pdolton2000 said:
Just to elaborate when flashing stock through Odin it wipes your custom recovery and root...hence why you need to use auto root again through Odin.
Click to expand...
Click to collapse
Yeah, have to make sure I have done it in right order, Stock -> Root -> Custom Recovery... I've tried so many solutions that I'm starting to doubt myself.

Unfortunately, I find myself in the same situation, I do not know what to do.

Have you flash pit file via odin because maybe your device partitions corrupt during rooting.

F-B said:
To elaborate, pressing vol up + power + home does not have any effect. Pressing vol down + home + power gives downloading mode as normal.
Click to expand...
Click to collapse
F-B said:
Cheers guys for your inputs! I'll only get my hands on the tab this evening, so I'll test your solutions then and report back-
Thanks, have to try this!
Yeah, flashed T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5 2,4gb
Tried flasing TWRP, no difference. Maybe here's the timing as well...
No clue about vold.fstab, so I seriously hope I haven't edited it
Yeah, have to make sure I have done it in right order, Stock -> Root -> Custom Recovery... I've tried so many solutions that I'm starting to doubt myself.
Click to expand...
Click to collapse
Hi just to add I have just edited the instructions I gave you please read again.

F-B said:
Cheers guys for your inputs! I'll only get my hands on the tab this evening, so I'll test your solutions then and report back-
Thanks, have to try this!
Yeah, flashed T700XXU1ANL1_T700AUT1ANL1_HOME.tar.md5 2,4gb
Tried flasing TWRP, no difference. Maybe here's the timing as well...
No clue about vold.fstab, so I seriously hope I haven't edited it
Yeah, have to make sure I have done it in right order, Stock -> Root -> Custom Recovery... I've tried so many solutions that I'm starting to doubt myself.
Click to expand...
Click to collapse
Okay sounds like you've hit a dead end but don't panic your not the first to hit this point with t700.
Okay here's what I want you to do,
1. Open up device manager and completely remove your adb driver making sure to check the "also delete driver " box if shown
2. Download this http://developer.android.com/sdk/win-usb.html the latest Google adb drivers ..DL this ready actually.
3. Completely disable anti virus..remove if you have to, along with windows defender .
4. Restart
5. Download "i know it seems mad" the austrailian firmware http://www.sammobile.com/firmwares/download/43233/T700XXU1ANL1_T700XSA1AOA1_XSA/ and extract the file inside the archieve
6. Right click Odin and run as administrator to be safe.
7. Go for gold and try this...if it works your laughing and can change the firmware or ROM to any local area.
8. If...this doesn't work...restart one last time n try again, if still no then try using another laptop or PC if you can
Good luck keep me updated...I am trying to find you another solution too, got an idea with something called heimdall but not sure as never used it, supposed to be an alternative to Odin.

Hi All, finally had the time to sit down and test your solutions. As it happens, the first (easiest) thing I tried was the timing in pushing recovery boot, according to great help of Maxal. Worked on first attempt, booted into stock recovery, wiped everything and stock rom booted. I was prepared to do it all, so it was funny that a few well-timed presses of buttons solved it .
Now I'm rooted with TWRP and BlissPop again. Thanks everyone for great suggestions and assistance!

I also solved, it was enough to wait for the battery becomes exhausted, recharge the tablet and once off from entering recovery and do a factory reset.
The system is restarted.

maxal said:
Try pressing power +vol down and up together+home and then as soon as screen goes dark/black press power+vol up+home hopefully that will get you into recovery.
Click to expand...
Click to collapse
Man, you're genius! Thanks!

My phone is stuck in recovery mode! Help me please!

Hi everyone!
I was flashing arnova gapps and gave me an error.
Now when i try to flash a rom give me this:
updater process ended with error: 7
now i am stucked in recovery. i wiped everything and reflashed latest havoc in which i deleted the "assert" lines ang give me no error, but i still stucked in twrp.
Can anyone help me?
Thank you!

thcerry said:
Hi everyone!
I was flashing arnova gapps and gave me an error.
Now when i try to flash a rom give me this:
updater process ended with error: 7
now i am stucked in recovery. i wiped everything and reflashed latest havoc in which i deleted the "assert" lines ang give me no error, but i still stucked in twrp.
Can anyone help me?
Thank you!
Click to expand...
Click to collapse
Do you have a backup you can restore?

lingo2012 said:
Do you have a backup you can restore?
Click to expand...
Click to collapse
no! i'm stupid.

you can flash stock kdz, can you get into download mode ( power off then press volume up while connecting usb to pc )? need LGUP dual mode

Bronnel said:
you can flash stock kdz, can you get into download mode ( power off then press volume up while connecting usb to pc )? need LGUP dual mode
Click to expand...
Click to collapse
no, i can't! if i power off the phone from twrp it just reboot the recovery.

thcerry said:
no, i can't! if i power off the phone from twrp it just reboot the recovery.
Click to expand...
Click to collapse
connect the phone to pc via usb , in TWRP choose reboot system > then press volume up , repeat multiple time until you get in to download mode

Bronnel said:
connect the phone to pc via usb , in TWRP choose reboot system > then press volume up , repeat multiple time until you get in to download mode
Click to expand...
Click to collapse
it's not working.
i am also downloading a stock firmware, maybe can do something.

thcerry said:
it's not working.
i am also downloading a stock firmware, maybe can do something.
Click to expand...
Click to collapse
Must get into "download mode" to kdz back to stock. Keep trying to get into "download mode" using vol. Up and good usb-c cable plugged into usb2 port running win10. May need to put phone in Ziploc freezer bag and in freezer to power phone completely off before getting into download mode

If you have access to TWRP flip over to command prompt (I think it's in advanced or settings) and see if you can use ADB commands to reboot into bootloader.
'adb reboot bootloader'
I've been in this exact situation before. H933

thcerry said:
no, i can't! if i power off the phone from twrp it just reboot the recovery.
Click to expand...
Click to collapse
Press and hold vol down + power button. When the screen turns off quickly hold vol up and plug in the phone.
May require 2 people to do it in time.

somehow i get back to stock! thank you all guys!

thcerry said:
somehow i get back to stock! thank you all guys!
Click to expand...
Click to collapse
Good to hear:good: