Develop Bugs

AT&T galaxy s3 softbricked

I was trying to install one of drewgarens touchwiz roms. touchwiz milestone 5 firefly i believe. not the most recent one because i was too lazy . boy was that a mistake. everything was going smoothly until it booted and it got stuck on boot. I thought no big deal just go into recovery and use a backup. until i did so and recovery was gone and there was only download mode. I have spent the whole afternoon trying to fix it and none of it has worked. I tried flashing the stock rom and it as well got stuck on boot. I looked at all the AT&t relevant ones and also the international versions. so all in all is there anyway to fix this and has anyone had the same issue? i was flashing from cyanogenmod 10 m1 to the drewgaren rom btw. I can also go to download mode. I tried to flash stock but it still gets stuck on boot. log. I flashed the ATT boot logo and it did not work. all of which were flashed through odin.
any thanks in advance is greatly appreciated.

I think you can flash back to stock with just download mode + odin

Randomacts said:
I think you can flash back to stock with just download mode + odin
Click to expand...
Click to collapse
I already tried that. It still get stuck on the Boot logo

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
I can't help you but I wish you luck.

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Unplug your device. Hold the power button to turn it off. Hold volume up, home, and power. It should go to recovery. If you do the same thing with volume down instead of up, you can get into download mode.
Sent from my SAMSUNG-SGH-I747 using xda premium

Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.

jethro650 said:
Sounds like you need a recovery...try this
http://forum.xda-developers.com/showthread.php?t=1746665
[SAMSUNG GALAXY S3 QCOM TOOLKIT V2.3] Drivers Backup Root CWM BusyBox + MORE [ATT]
Follow the instructions and you should be able to flash the recovery and continue on with what you were doing. Remember to wipe really good when going from aosp back to any stock based ROM. They are completely different and will cause boot loops if you don't wipe.
Click to expand...
Click to collapse
I cannot enable usb debugging

Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.

jethro650 said:
Crap...there are Odin flashable versions of cwm floating around you'll need to find one of those. If you haven't found one I'll post one up when I get home.
Click to expand...
Click to collapse
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
Ok here we go Odin cwm--> https://dl.dropbox.com/u/28590257/Odin recovery/CWM-Recovery-LTE-SGS3-v4.tar.md5
Newest twrp --> https://dl.dropbox.com/u/28590257/Odin recovery/twrp2.3.1install.zip
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.

jethro650 said:
K I made it home lol. I'll attach a Odin flashable cwm, it's an older one but it'll get you a recovery, I hope. I just tried it on my phone with Odin, 3.07 both with usb debugging enabled and disabled on my phone and it worked both times. Crap keep getting errors uploading right to xda servers, I'll drop box it in a minute.
I'll add the newest twrp for you lol. Flash the cwm with odin, should work and then the twrp is a zip you can flash in cwm.
Hope this helps get you a recovery.
Remember in Odin use only PDA and only have auto reboot checked.
Click to expand...
Click to collapse
This may sound like a stupid question but what boxes do i tick in odin?

After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:

jethro650 said:
After your hooked up and Odin is open under the options on the left side check only Auto Reboot. On the right under files check PDA and use that button to browse your computer and find the cwm you downloaded from my dropbox. Then just hit start on the bottom of the Odin window and let it finish, your phone should reboot when its done. It will get stuck again like you described in your first post but pull the battery, put it back in and boot into recovery using vol up,home and power buttons. That should (if everything flashed OK) put you into cwm 5.5.0.4. Once there wipe data/factory reset then restore the back up you mentioned in your original post, that should get you running again.
---------- Post added at 06:05 PM ---------- Previous post was at 05:55 PM ----------
If something has happened to your backup then you could try the stock rooted stuff here , just pick the one for your carrier and follow the instructions. :highfive:
Click to expand...
Click to collapse
I was able to get it into recovery but i realized i did not have my sd card in so i turned it off and put my sd card in. unfortunately i was not able to get it back into recovery i tried flashing it again with the sd card in and no luck

That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?

jethro650 said:
That's odd. Couple of stupid questions on my part just to make sure, you had the right button combo, and, you released the buttons soon as the splash screen came on? Can you still get into download mode? Oh and did you do the wipes while in recovery?
Click to expand...
Click to collapse
oh my gosh THANK YOU SOOOMUCH. I was worried i would have to take it to at&t ill be sure to press the thanks button.

I take it you got your phone working lol. Glad I could help a little. Little advice, anytime you switch to a different type of ROM (aosp to stock based or the other way around) make sure you wipe data/factory reset before flashing anything. It will save you problems in the long run.
Oh and could you go back and edit your original post and just add solved in brackets to the title for people in trouble looking for info.

stuart26 said:
I already tried that. It still get stuck on the Boot logo
Click to expand...
Click to collapse
Depending on which stock ROM you flashed with odin you should now have a recovery, if not then something isn't right. The full bone stock ROM should have the factory 3e recovery, and the root injected stock ROM should have some version of CWM recovery. A factory reset will most likely fix your boot loop, if there is no recovery flash the rooted stock ROM that matches your device from this guide.
Edit - Didn't see there was a second page 0_o

AOKP to STOCK BIG PROBLEMS

i need some help here guys. i was running AOKP for the longest time and loving it. then today i tried to update to the latest version. i downloaded the rom and went to flash the .zip in CWM. i've done this dozens of times. this time things were completely different. i kept getting FCs over and over. so i booted into recovery again to reflash. for whatever reason, it seemed like my file system was corrupted. folders i had never seen were all over the place. it was a big mess. i decided to flash back to stock. i booted into DL mode and did this with odin successfully. then upon reboot, the phone was stuck at the Samsung logo. looking into this i saw that i needed to boot into recovery, wipe data/factory reset, wipe cache, and wipe dalvik cache. i tried doing this but no matter what, my phone will not boot into recovery. i have even used odin to flash CF-SGS3-CWM-v5.5-v1.0.tar. when i press volume up+home+power i get the first samsung logo with the tiny blue text up at the top saying "recovery booting" but then nothing happens and the phone just goes to a normal boot attempt, which stalls at the samsung logo. please help guys. just for a quick overview. was on [ROM] AOKP(Jellybean 4.2.1 )Task & Ktoonsez (12/23) (AT&T/Rogers), potential file system corruption during a routine upgrade, flashed back to stock with odin (meaning i can still boot into DL mode), but CANNOT boot into RECOVERY mode. i'm freaking out

jamesquags said:
i need some help here guys. i was running AOKP for the longest time and loving it. then today i tried to update to the latest version. i downloaded the rom and went to flash the .zip in CWM. i've done this dozens of times. this time things were completely different. i kept getting FCs over and over. so i booted into recovery again to reflash. for whatever reason, it seemed like my file system was corrupted. folders i had never seen were all over the place. it was a big mess.
i decided to flash back to stock. i booted into DL mode and did this with odin successfully. then upon reboot, the phone was stuck at the Samsung logo. looking into this i saw that i needed to boot into recovery, wipe data/factory reset, wipe cache, and wipe dalvik cache. i tried doing this but no matter what, my phone will not boot into recovery.
i have even used odin to flash CF-SGS3-CWM-v5.5-v1.0.tar. when i press volume up+home+power i get the first samsung logo with the tiny blue text up at the top saying "recovery booting" but then nothing happens and the phone just goes to a normal boot attempt, which stalls at the samsung logo. please help guys.
just for a quick overview. was on [ROM] AOKP(Jellybean 4.2.1 )Task & Ktoonsez (12/23) (AT&T/Rogers), potential file system corruption during a routine upgrade, flashed back to stock with odin (meaning i can still boot into DL mode), but CANNOT boot into RECOVERY mode. i'm freaking out
Click to expand...
Click to collapse
First of all, good job on searching before posting! :good:
Second, if you want help, try using capital letters at the start of a sentence and using paragraphs. It makes it sooo much easier to read that way.
Third, just keep trying. But from what you're saying about a file-system issue, that could be bad? It's not familiar to me anyways. Hope it didn't damage the internal SD.
If nothing else works, then try the USB-JIG to access Recovery mode. They're like $5 on eBay.
Okay, try these things.
1) Odin a non-rooted, stock ROM that comes with a 3E recovery and try to access that recovery.
If that doesn't work, move onto this step:
2) Odin a different recovery. I attached one to this post. Just unzip it and then odin it. :CWM-Recovery-LTE-SGS3-v5.tar:
Try to get recovery again after a battery pull.

If that doesn't do it, then try this next:
1) Odin a rooted ROM onto the phone.
2) Download the attached "openrecovery-twrp-2.3.1.0-d2att" and unzip it.
3) Download this ADB & Fastboot tool and extract it to your C:/ drive with subfolders using this path: "C:/Android/platform-tools/".
Here is the file to download:
http://www.androidfilehost.com/?fid=9390135922294523275
4) Rename the openrecovery-twrp-2.3.1.0-d2att to "recovery" and place it into the Platform-tools folder.
5) Open the JPEG and follow the EXACT same commands in the pic. This will install TWRP recovery for you.
Then try once again to get into recovery.
If it still doesn't work, then buy a USB Jig.

REPLY
Thanks so much for the advice.
Regarding the TWRP installation, is the phone connected to the computer in DL mode for this?
I am currently downloading a rooted stock ROM. This might help shed light on what is going on here.... I unzipped the .tar you attached to your first post and stuck it in the PDA slot with the phone connected and in DL mode. ODIN did nothing and the returned a FAIL message saying that it "Failed to Open Serial [COM] Port". Hmmmm. Anyways I am going to try to install the TWRP recovery. If not I will buy the USB jig. Thanks again for you help. -jim

jamesquags said:
"Failed to Open Serial [COM] Port".
Click to expand...
Click to collapse
Have you installed the phone drivers? They're linked from the Odin thread.

smelenchuk said:
Have you installed the phone drivers? They're linked from the Odin thread.
Click to expand...
Click to collapse
Yes i have installed the drivers. I have flashed multiple .tar files today.

jamesquags said:
Thanks so much for the advice.
Regarding the TWRP installation, is the phone connected to the computer in DL mode for this?
I am currently downloading a rooted stock ROM. This might help shed light on what is going on here.... I unzipped the .tar you attached to your first post and stuck it in the PDA slot with the phone connected and in DL mode. ODIN did nothing and the returned a FAIL message saying that it "Failed to Open Serial [COM] Port". Hmmmm. Anyways I am going to try to install the TWRP recovery. If not I will buy the USB jig. Thanks again for you help. -jim
Click to expand...
Click to collapse
The TWRP doesn't use Odin. You have to use ADB/FastBoot like I show in the picture attached with it.
I have yet to find an Odin flashable TWRP.

CZ Eddie said:
The TWRP doesn't use Odin. You have to use ADB/FastBoot like I show in the picture attached with it.
I have yet to find an Odin flashable TWRP.
Click to expand...
Click to collapse
After flashing the ROOTED STOCK ROM, I tried about 7 times to boot into recovery. It finally did!!! I then was able to do a wipe data and cache and I'm all set.
Thanks so much for helping me out. -jim

To get into recovery hold the power+volume up+ home key when you see the blue text at the top of the screen let go if the power button but still press the home + volume up
Sent from my SGH-I747 using Tapatalk 2

jerrycoffman45 said:
To get into recovery hold the power+volume up+ home key when you see the blue text at the top of the screen let go of the power button but still press the home + volume up
Click to expand...
Click to collapse
Why do you continue to hold the home + volume up? I release all three as soon as I see the blue text and it goes into Recovery just fine for me.

CZ Eddie said:
Why do you continue to hold the home + volume up? I release all three as soon as I see the blue text and it goes into Recovery just fine for me.
Click to expand...
Click to collapse
i dont know i have always done it that way well learned something new just tried it your way thanks

Unbricking phone?

So I was installing modaco switch on my phone and it worked for a bit but then when I rebooted it it wouldn't turn on. I've tried flashing it in odin and nothing happened and it still doesn't work. I was wondering if anyone else had any ideas.

Can you access Odin? If so, I recommend flashing back to stock first.

joshua.justice said:
So I was installing modaco switch on my phone and it worked for a bit but then when I rebooted it it wouldn't turn on. I've tried flashing it in odin and nothing happened and it still doesn't work. I was wondering if anyone else had any ideas.
Click to expand...
Click to collapse
Are you able to get your device into ODIN/Download mode?
If so, flash the Samsung Stock Firmware as macboy3000 suggested.
To get your device into ODIN mode:
Power down device
Press Power and Vol down buttons and hold
Device should show an image
Press Vol up and you'll be in ODIN mode
Some helpful tips:
Follow the instructions via the red link in my sig.
Be sure to have enough juice in your battery
Have a good usb cord. This is the reason many ODIN flashes fail.
Check your md5 checksum match between the download file and your download prior to flashing the stock Firmware.

macboy3000 said:
Can you access Odin? If so, I recommend flashing back to stock first.
Click to expand...
Click to collapse
Biker1 said:
Are you able to get your device into ODIN/Download mode?
If so, flash the Samsung Stock Firmware as macboy3000 suggested.
To get your device into ODIN mode:
Power down device
Press Power and Vol down buttons and hold
Device should show an image
Press Vol up and you'll be in ODIN mode
Some helpful tips:
Follow the instructions via the red link in my sig.
Be sure to have enough juice in your battery
Have a good usb cord. This is the reason many ODIN flashes fail.
Check your md5 checksum match between the download file and your download prior to flashing the stock Firmware.
Click to expand...
Click to collapse
I tried flashing it twice and it still said successful when it finished flashing but continued to boot loop.
I'm not sure what would cause think

joshua.justice said:
I tried flashing it twice and it still said successful when it finished flashing but continued to boot loop.
I'm not sure what would cause think
Click to expand...
Click to collapse
After you flashed ODIN, did you go into stock recovery and Factory reset, then reboot, both from within Recovery?

Biker1 said:
After you flashed ODIN, did you go into stock recovery and Factory reset, then reboot, both from within Recovery?
Click to expand...
Click to collapse
No, I don't think it'll boot the stock recovery but I'll try that

If you flash stock and still receive boot loops, try going into recovery and wiping data and cache.

take out your sdcard too just for the hell of it.

I just reread your post, and your device is working fine, it's just that you want to know how to get Modaco Switch to work on your device with stability, because it stops working shortly after it's installed.
I had thought your device stopped working. I don't think ODIN will be your answer, and I don't about Modaco.
Maybe:
See if others have Modaco Switch working with stability, and if so:
try wiping cache & dalvik cache in Recovery, or try wiping first.

Biker1 said:
I just reread your post, and your device is working fine, it's just that you want to know how to get Modaco Switch to work on your device with stability, because it stops working shortly after it's installed.
I had thought your device stopped working. I don't think ODIN will be your answer, and I don't about Modaco.
Maybe:
See if others have Modaco Switch working with stability, and if so:
try wiping cache & dalvik cache in Recovery, or try wiping first.
Click to expand...
Click to collapse
It's not working fine. It doesn't boot at all. I tried going into recovery and it still boot loops even after flashing with odin.

joshua.justice said:
It's not working fine. It doesn't boot at all. I tried going into recovery and it still boot loops even after flashing with odin.
Click to expand...
Click to collapse
Ah, so I did read it right the first time. I saw the title the 1st time but I didn't see it the 2nd time, which is why I thought just Modaco wasn't turning on when I read your post without reading the title the 2nd time.
Plus I missed all the follow up posts. That's what I get for running around on my phone trying to read threads
With that being said, then what I wrote should resolve your issues.
Follow my RED link in my sig, and that should help to resolve your issues. I wrote out the steps previously, but looking at the link may help you

Biker1 said:
Ah, so I did read it right the first time. I saw the title the 1st time but I didn't see it the 2nd time, which is why I thought just Modaco wasn't turning on when I read your post without reading the title the 2nd time.
Plus I missed all the follow up posts. That's what I get for running around on my phone trying to read threads
With that being said, then what I wrote should resolve your issues.
Follow my RED link in my sig, and that should help to resolve your issues. I wrote out the steps previously, but looking at the link may help you
Click to expand...
Click to collapse
It doesn't boot into recovery so how can I wipe those?

joshua.justice said:
It doesn't boot into recovery so how can I wipe those?
Click to expand...
Click to collapse
You mentioned in the op you tried flashing in ODIN.
What exactly is your phone able to do?
Do you see anything on the display?
Does it boot into anything?
Etc...
What does 'tried going into recovery but it still boot loops' mean?
If you go step by step what you did before the issue and after, including Exactly what status your device is in, it will help in attempting to troubleshoot and resolve your issues.

I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.

joshua.justice said:
I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.
Click to expand...
Click to collapse
Can you confirm what version of the S4 you have?
The SGH-M919?
Not trying to be stupid or anything, just making sure.
Have you tried this..
1. Flash a recovery image using Heimdall (I'd suggest ClockworkMod)
2. Reboot to recovery. (Hopefully it goes through this time)
3. adb sideload a ROM to your device.
4. Flash the ROM.
5. Win?
Just trying to think of ways you can get your device back up and running.

joshua.justice said:
I can get it into download mode but flashing Odin does nothing. When I hit the power button to turn it on it goes all the way until the t mobile logo and stalls. Sometimes it just vibrations off and on with a dark screen. When I try to go into recovery with the volume up and power keys or says 'rebooting recovery' in blue like it always does but then it just goes to booting normally and then hangs there.
Click to expand...
Click to collapse
You have to:
Power down device
Don't power up
Press Power and Vol down buttons simultaneously
Press Vol up button
You should be in ODIN mode

Biker1 said:
You have to:
Power down device
Don't power up
Press Power and Vol down buttons simultaneously
Press Vol up button
You should be in ODIN mode
Click to expand...
Click to collapse
I did that. It's caked download mode. That's where I flashed Odin off my computer.

I noticed after flashing stock with Odin, I get bootloops, unless I do a factory reset. After stock flashes, it reboots into recovery and wipes cache by itself. When it finishes that and it starts to reboot by itself, I press the volume up button and go into recovery. I do a factory reset and reboot and all is fine, no bootloops.

norml said:
I noticed after flashing stock with Odin, I get bootloops, unless I do a factory reset. After stock flashes, it reboots into recovery and wipes cache by itself. When it finishes that and it starts to reboot by itself, I press the volume up button and go into recovery. I do a factory reset and reboot and all is fine, no bootloops.
Click to expand...
Click to collapse
Mine doesn't do that though. It just boot loops without going into recovery.

joshua.justice said:
Mine doesn't do that though. It just boot loops without going into recovery.
Click to expand...
Click to collapse
I understand that, my post is describing what happens when you flash a stock tar, not bootlooping, I am describing exactly what happens during the process of flashing a stock tar and how to avoid bootlooping, step by step. I guess you weren't paying attention when you flashed a stock tar with Odin, it reboots for the first time by itself and goes into stock recovery and wipes cache by itself, it's a normal process, maybe that part confused you. Any hows, good luck, I have explained step by step what I do to avoid bootloops and my directions are clear and simple. Bye.

[Q] galaxy w nothing work

my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.

bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
your screen doesn't even turn on ?

can you post sompe picture of that?

if you can go to the download mode (VOL DOWN + HOME + POWER) flash the stock rom through odin

bashrimuhaiedin said:
my galaxy w turn black and nothing work, its happened after im installing cwm. maybe because im too fast pull out usb wire. :crying: please help me. now im realize why am i doing this, after all im only 15teen. T.T help me.
Click to expand...
Click to collapse
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app

MayB4ck said:
Hi, I had a similar problem a day ago, I corupted CWM and couldn't boot into android, When i started my phone a samsung logo appeared and then black screen, I could access download mode ( Power button, Volume - and home button ) So all you do after you enter download mode is download Odin multi downloader, and a flashable ClockworkMOD recovery, ( PM me if you want links ) and flash it into the phone, after that just reboot the phone and you will be just fine.
Press the Thanks button if i helped
Sent from my GT-I8150 using XDA-developers app
Click to expand...
Click to collapse
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.

mohamed_fattoh said:
I tried the above method, i got the attached screen. However, i can't start my phone till now. Please advise.
Click to expand...
Click to collapse
Hey, it's seem your setting wrong, uncheck reset time.

hinfamous said:
Hey, it's seem your setting wrong, uncheck reset time.
Click to expand...
Click to collapse
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.

mohamed_fattoh said:
I did this but, still not succeeded. Do you suggest to try to download the stock ROM instead of the CWM?
I'm trying to download the CWM not the stock ROM.
Thank you guys.
Click to expand...
Click to collapse
Hey,
First put your phone into download mode and plug it in to your PC and make sure Odin recognizes it, then add Ancora.ops in the OPS window and the recovery.tar.md5 in the One package window. Also make sure that One package , Auto reboot and Protect OPS are checked, you should uncheck reset time because i've hear that it is causing some problems. Then just click the " Start " button and sit back, you phone will be back on in few minutes.
Just a question : Did you have any android installed when you corrupted the recovery? If yes, after you flashed the recovery the phone will reboot and will boot into android, if not then just flash the rom file if you already have one in your sdcard/internal storage.
Your phone is soft-bricked, don't worry, it will be back and running again :laugh:
I just corrupted my recovery on my phone on purpose to try if the cwm recovery works. And yes, it worked, so it should work on your phone too.
Good luck flashing your recovery, Please answer back because I want to know if this method worked.
Here are the files, just extract the rar file

Finally i have KitKat!!
Finally Solved!!!!!!!!!!!!!!!!!!!!!!!
After long days and hundred tries, it works finally. The story is as below:
1- I failed to download the CWM 6.0.4.5 directly in this state using ODIN,
2- I downloaded the stock (Yes old 2.3.6 ginger bread ROM) using ODIN. However this version keep rebooting and never completed the start up.
3- With ROM installed now (even it's not booting), i tried to download older version of CWM using ODIN (CWM 5.0.4). It was successful!!
4- I tried to do the restore for my old system, but it failed as i did backup with newer version.
5- I flashed Monster ROM (4.2.2), it works wonderful.
6- I downloaded the CWM 6.0.4.5 finally using ODIN.
7- Now i'm using 4.4.2 on my mobile finally.
Advice: Never do a flashing to your mobile when you are not fully concentrating what you are doing. Also, make sure to download the right tool and ROM for your device.
Thank you for everyone who tried to help me.
Muhammad

[Q] its bad

Tried Cyanogen 10.2 d2spr
Sprint Galaxy s3 L710
Android 4.3
Odin 1.85
Got superuser and used goomanager w twrps
made backups
Tried to flash cyanogen and i got error missing md5
tried a fix where you edit the updater-scripts in the cyanogen zip and that didnt work
Then I read that switching to cws would fix the problem, I read that you can d/l the cws zip and use twrps to flash it
Basically I was way over my head and shoulda kept the restore to stock option because that WAS working
Phone wont boot normal. volumeup and power and menu just flashes"recovery booting" or something really fast in the top left corner and shuts back off
Idk... Odin doesnt recognize the phone anymore
Definitely dont know what im doing anymore

thecuddy said:
Tried Cyanogen 10.2 d2spr
Sprint Galaxy s3 L710
Android 4.3
Odin 1.85
Got superuser and used goomanager w twrps
made backups
Tried to flash cyanogen and i got error missing md5
tried a fix where you edit the updater-scripts in the cyanogen zip and that didnt work
Then I read that switching to cws would fix the problem, I read that you can d/l the cws zip and use twrps to flash it
Basically I was way over my head and shoulda kept the restore to stock option because that WAS working
Phone wont boot normal. volumeup and power and menu just flashes"recovery booting" or something really fast in the top left corner and shuts back off
Idk... Odin doesnt recognize the phone anymore
Definitely dont know what im doing anymore
Click to expand...
Click to collapse
Can you get into download mode or are you just plugging into the computer; Odin won't recognize your phone unless it is in download mode first. Also, I find Odin 3.07 to be a bit better than 1.85.

Mr. Struck said:
Can you get into download mode or are you just plugging into the computer; Odin won't recognize your phone unless it is in download mode first. Also, I find Odin 3.07 to be a bit better than 1.85.
Click to expand...
Click to collapse
it doesnt do anything when i try to get to download mode.
If its plugged to the computer or wall, it will boot loop without a samsung screen
Not plugged in boots to samsung screen with blue text top left and shuts off right after. can barely read the blue text its so fast

thecuddy said:
it doesnt do anything when i try to get to download mode.
If its plugged to the computer or wall, it will boot loop without a samsung screen
Not plugged in boots to samsung screen with blue text top left and shuts off right after. can barely read the blue text its so fast
Click to expand...
Click to collapse
To be clear, you are holding Volume Down (not Volume Up, which is for Recovery Mode), Home Key, and Power Button all at the same time until the main Download screen appears?

Mr. Struck said:
To be clear, you are holding Volume Down (not Volume Up, which is for Recovery Mode), Home Key, and Power Button all at the same time until the main Download screen appears?
Click to expand...
Click to collapse
ok. i wasnt holding that one long enough. so now use odin? <3

Mr. Struck said:
To be clear, you are holding Volume Down (not Volume Up, which is for Recovery Mode), Home Key, and Power Button all at the same time until the main Download screen appears?
Click to expand...
Click to collapse
Ran odin and now i can get it to boot to cwm instead of twrps. should i go for the install again or call it quits. i dunno what exactly went wrong or how to go about the install from this point. thank you

thecuddy said:
ok. i wasnt holding that one long enough. so now use odin? <3
Click to expand...
Click to collapse
You need a couple of things first. You will want to use Odin to push the latest version of Philz Touch, as it is a much better recovery than either CWM or TWRP. There is an option in Philz to restore TWRP backups, so as long as the backup you made earlier was of a proper working ROM (I would assume of your stock version), then you can use Philz to restore it. If you aren't comfortable switching recoveries right away, use Odin to push TWRP again. Basically, I want to make sure you have a working custom recovery in place before proceeding any further. Also, don't use a third-party to download/install ROM's, you need to be downloading from the official source. If you are wanting to run Cyanogen, go to their website and download directly from them.
Philz Touch XDA Thread by CNexus
http://www.cyanogenmod.org/
Once you have pushed the recovery onto your phone (make sure the Reboot option is unchecked in Odin, otherwise it will boot up too soon), pull your battery out for about ten seconds, replace, and then use the button sequence for Recovery Mode, make sure to hold the buttons past the vibration until the actual screen pops up.
---------- Post added at 12:35 AM ---------- Previous post was at 12:26 AM ----------
thecuddy said:
Ran odin and now i can get it to boot to cwm instead of twrps. should i go for the install again or call it quits. i dunno what exactly went wrong or how to go about the install from this point. thank you
Click to expand...
Click to collapse
If you received an MD5 error on the first install, you most likely have a bad download, so you probably won't be able to flash it with CWM either. I am assuming that when you made your backup, you used TWRP, in which case you cannot restore that with CWM, you will need either Philz Touch or TWRP. We need to get you booted back into a working system before proceeding, as you should have no OS installed currently if you wiped everything properly before attempting to flash Cyanogen.

I feel like Im going to have three different recoveries on the phone if I do that. I don't understand what im doing fundamentally. All I can do right now is follow instructions. And I'm scared now lol. How do I increase your thanks meter ahah Maybe I should do more research. Should what I was trying to do work in the first place?

thecuddy said:
I feel like Im going to have three different recoveries on the phone if I do that. I don't understand what im doing fundamentally. All I can do right now is follow instructions. And I'm scared now lol. How do I increase your thanks meter ahah Maybe I should do more research. Should what I was trying to do work in the first place?
Click to expand...
Click to collapse
Only one recovery can exist at a time, so whatever one you pushed or flashed most recently will be the current one. Which one did you have on the phone when you made your backup? That will be a good starting point.

Mr. Struck said:
Only one recovery can exist at a time, so whatever one you pushed or flashed most recently will be the current one. Which one did you have on the phone when you made your backup? That will be a good starting point.
Click to expand...
Click to collapse
Started with twrps. Got md5 error. Reverted to backup. Then got cwm zip and booted to twps and tried to install it. Then problem.

thecuddy said:
Started with twrps. Got md5 error. Reverted to backup. Then got cwm zip and booted to twps and tried to install it. Then problem.
Click to expand...
Click to collapse
So as I mentioned earlier, you will need to get either TWRP back as your recovery, in order to restore the backup you made with it, or you will want to switch to Philz, which is the best recovery option available anyway, and use Philz to restore your TWRP backup. I think for starters you will want to use TWRP just to get back up and running, and then switch to Philz soon so that you aren't too overwhelmed tonight.
http://techerrata.com/browse/twrp2/d2spr
Choose the tar file for either version 2.6.3.0 or 2.6.3.1 and use Odin to push it onto your phone (2.6.3.1 is the newest version, but doesn't install properly on some devices; 2.6.3.0 should work for our purposes if 2.6.3.1 doesn't install properly for you). Then follow my instructions a couple of posts back about booting into recovery after using Odin.

Ill have to do this tomorrow. I pushed the tar through with odin and the phone is running at stock with supersu. Im not sure if my recovery is cwm or twrp now. But I have spent all day doing this. Ill continue tomorrow thnx again.

thecuddy said:
Ill have to do this tomorrow. I pushed the tar through with odin and the phone is running at stock with supersu. Im not sure if my recovery is cwm or twrp now. But I have spent all day doing this. Ill continue tomorrow thnx again.
Click to expand...
Click to collapse
You should now have TWRP as your custom recovery. Feel free to PM me if needed tomorrow for any advice going forward.