Hi everyone!
I was flashing arnova gapps and gave me an error.
Now when i try to flash a rom give me this:
updater process ended with error: 7
now i am stucked in recovery. i wiped everything and reflashed latest havoc in which i deleted the "assert" lines ang give me no error, but i still stucked in twrp.
Can anyone help me?
Thank you!
thcerry said:
Hi everyone!
I was flashing arnova gapps and gave me an error.
Now when i try to flash a rom give me this:
updater process ended with error: 7
now i am stucked in recovery. i wiped everything and reflashed latest havoc in which i deleted the "assert" lines ang give me no error, but i still stucked in twrp.
Can anyone help me?
Thank you!
Click to expand...
Click to collapse
Do you have a backup you can restore?
lingo2012 said:
Do you have a backup you can restore?
Click to expand...
Click to collapse
no! i'm stupid.
you can flash stock kdz, can you get into download mode ( power off then press volume up while connecting usb to pc )? need LGUP dual mode
Bronnel said:
you can flash stock kdz, can you get into download mode ( power off then press volume up while connecting usb to pc )? need LGUP dual mode
Click to expand...
Click to collapse
no, i can't! if i power off the phone from twrp it just reboot the recovery.
thcerry said:
no, i can't! if i power off the phone from twrp it just reboot the recovery.
Click to expand...
Click to collapse
connect the phone to pc via usb , in TWRP choose reboot system > then press volume up , repeat multiple time until you get in to download mode
Bronnel said:
connect the phone to pc via usb , in TWRP choose reboot system > then press volume up , repeat multiple time until you get in to download mode
Click to expand...
Click to collapse
it's not working.
i am also downloading a stock firmware, maybe can do something.
thcerry said:
it's not working.
i am also downloading a stock firmware, maybe can do something.
Click to expand...
Click to collapse
Must get into "download mode" to kdz back to stock. Keep trying to get into "download mode" using vol. Up and good usb-c cable plugged into usb2 port running win10. May need to put phone in Ziploc freezer bag and in freezer to power phone completely off before getting into download mode
If you have access to TWRP flip over to command prompt (I think it's in advanced or settings) and see if you can use ADB commands to reboot into bootloader.
'adb reboot bootloader'
I've been in this exact situation before. H933
thcerry said:
no, i can't! if i power off the phone from twrp it just reboot the recovery.
Click to expand...
Click to collapse
Press and hold vol down + power button. When the screen turns off quickly hold vol up and plug in the phone.
May require 2 people to do it in time.
somehow i get back to stock! thank you all guys!
thcerry said:
somehow i get back to stock! thank you all guys!
Click to expand...
Click to collapse
Good to hear:good:
Related
I flashed the JB rom and it worked fine. I then stupidly tried to put on franco's custom kernel and my phone is now hanging at the Google first boot screen. I booted into odin but i only have the START option.
I've tried doing fastboot flash recovery CMW.img on three computers now and it states waiting for device...
Any help please?
Edit: the drivers do install on the machine once plugged in.
denis300 said:
I flashed the JB rom and it worked fine. I then stupidly tried to put on franco's custom kernel and my phone is now hanging at the Google first boot screen. I booted into odin but i only have the START option.
I've tried doing fastboot flash recovery CMW.img on three computers now and it states waiting for device...
Any help please?
Edit: the drivers do install on the machine once plugged in.
Click to expand...
Click to collapse
Do you still need help with your device?
denis300 said:
I flashed the JB rom and it worked fine. I then stupidly tried to put on franco's custom kernel and my phone is now hanging at the Google first boot screen. I booted into odin but i only have the START option.
I've tried doing fastboot flash recovery CMW.img on three computers now and it states waiting for device...
Any help please?
Edit: the drivers do install on the machine once plugged in.
Click to expand...
Click to collapse
Press and hold volume + and -, then hit power. Now try fastboot flashing your recovery.
It sounded like you were in download mode trying to the do the impossible.
GideonX said:
Press and hold volume + and -, then hit power. Now try fastboot flashing your recovery.
It sounded like you were in download mode trying to the do the impossible.
Click to expand...
Click to collapse
I fixedit with adb reboot recovery while being in odin mode. Once i booted into recovery through adb i was able to go into cwm.
denis300 said:
I fixedit with adb reboot recovery while being in odin mode. Once i booted into recovery through adb i was able to go into cwm.
Click to expand...
Click to collapse
Good job!
changed the nav bar settings to show nav settings and then rebooted now stuck in a boot loop any help would be much app cheers :laugh:
strikerdj2011 said:
changed the nav bar settings to show nav settings and then rebooted now stuck in a boot loop any help would be much app cheers :laugh:
Click to expand...
Click to collapse
Reflash your rom via UPDATE.APP, you probably have corrupted the build.prop
S34Qu4K3 said:
Reflash your rom via UPDATE.APP, you probably have corrupted the build.prop
Click to expand...
Click to collapse
cheers
S34Qu4K3 said:
Reflash your rom via UPDATE.APP, you probably have corrupted the build.prop
Click to expand...
Click to collapse
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
poirot13 said:
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
Click to expand...
Click to collapse
Yestarday in Russian forum we get rid of bootloop
just download http://4pda.ru/pages/go/?u=http://yadi.sk/d/ZzsEQXm27IgEI this custom rom
connect your phone to your computer
launch the bat file Flash All.bat
and press and hold volume down and power buttons
in PC press 1 and enter and any key.
after flash custom rom you may flash official rom
Just try it
Sorry for my bad English........
Already solved here
http://forum.xda-developers.com/showthread.php?t=2401285
Sent from my HUAWEI P6-U06 using xda app-developers app
First flash done, how to flash official rom to the device?
SVikFromOrel said:
Yestarday in Russian forum we get rid of bootloop
just download this custom rom
connect your phone to your computer
launch the bat file Flash All.bat
and press and hold volume down and power buttons
in PC press 1 and enter and any key.
after flash custom rom you may flash official rom
Just try it
Sorry for my bad English........
Click to expand...
Click to collapse
First flash done, how to flash official rom to the device?
same problem
i dears
i have the same problem, device reboot every time i try to do something, i just tryed all metods including update.app, installation start but when come to "system" point...... reboot!
i dont know what doing again to solve that problem.
obbom said:
i dears
i have the same problem, device reboot every time i try to do something, i just tryed all metods including update.app, installation start but when come to "system" point...... reboot!
i dont know what doing again to solve that problem.
Click to expand...
Click to collapse
Since you can actually enter the recovery i suggest that you go in manually and try to reset/wipe and see if it starts.
Sent from my SM-G850F
---------- Post added at 23:50 ---------- Previous post was at 23:48 ----------
tardolus said:
First flash done, how to flash official rom to the device?
Click to expand...
Click to collapse
Get an update.app file from internet (Firmware of your choice), put it in sd card in folder named dload and enter the recovery.
Sent from my SM-G850F
tryed! but also in recovery after 10 seconds reboot aniway.
i can only put the device over the window!!...
obbom said:
tryed! but also in recovery after 10 seconds reboot aniway.
i can only put the device over the window!!...
Click to expand...
Click to collapse
How about bootloader mode, can you enter that?
Sent from my SM-G850F
no mate! i can't boot in bootloader mode, all driver are installed but pc dont see the phone because no bootloader mode.
obbom said:
no mate! i can't boot in bootloader mode, all driver are installed but pc dont see the phone because no bootloader mode.
Click to expand...
Click to collapse
Do you know the button combination to enter it? Or its not entering at all in bl mode?
Sent from my SM-G850F
yes mate i am a good modder, i know all buttons combination of all devices but in this way i think that the only thing is go to in a service center
but thanks aniway
cheers from italy
obbom said:
yes mate i am a good modder, i know all buttons combination of all devices but in this way i think that the only thing is go to in a service center
but thanks aniway
cheers from italy
Click to expand...
Click to collapse
Ok then last thing that i can suggest before you send it in for repair is that you download a diferent firmware (diferent update.app file) and try to flash that. If it fails again then send it.
Sent from my SM-G850F
I tried to install ROM [20140920]VUPMP.GPRO.sG3.Stable for LG GPRO. I was on stock 4.1.2 rooted and I have e980 at&t. I had twrp 2.6.3 installed and in options I chose to keep the recovery as it is. After flashing the zip, file Installation of zip file failed appeared and I ignored it and rebooted the mobile, hoping to run the rom. But since then my phone is stuck on Lg logo. I can't boot into Twrp recovery as well and I try to boot into recovery it doesn't boot up instead phone is again stuck on Lg logo. I can't boot to bootloader either. I can't boot into download mode either so I can't flash the stock rom. What should I do to recover my phone? Please help !!! Is there any way to flash the stock rom as I can't get into download mode. Whenever I try to get into download mode using the volume up and power key, I end up on the same lg screen. All methods for installing stock rom that I have seen involve booting into download mode. Please help!!!!!!!!!!!!!!!!!!!!! can I flash a recovery some how?
To get into download mode, you need to press both volume buttons simultaneously while plugging in the USB cable, not volume up and power.
machinistsWIP said:
To get into download mode, you need to press both volume buttons simultaneously while plugging in the USB cable, not volume up and power.
Click to expand...
Click to collapse
I have tried that too. Phone still gets stuck on Lg logo
munirshah77 said:
I have tried that too. Phone still gets stuck on Lg logo
Click to expand...
Click to collapse
Was the battery out when you tried it ?
2SHAYNEZ
I was trying to get into download mode the wrong way. Thanks for correcting me
munirshah77 said:
I was trying to get into download mode the wrong way. Thanks for correcting me
Click to expand...
Click to collapse
Same thing happened to me. Don't worry at all, if you follow the steps referenced there, you will recover your phone.
munirshah77 said:
I was trying to get into download mode the wrong way. Thanks for correcting me
Click to expand...
Click to collapse
That's what we're here for! [emoji2]
Hi,
I've really big problem and i hope that here i get sugestion...
1, I try flash new ROM to my phone. I copy ROM to "SD card" but in wrong version.
After this I into Flashtool get new Kernel and new ver. of TWRecovery. Then I go to recovery and start flashing as every time before...
2, But now I'm in bad sittuation. I can only get into recovery... When i want to go to bootloger, i can't. Every time when I go to bootloger from recovery, i'm back in recovery. Every time is phone reaction the same as I hold power up button+vol. up. And I'm only in recovery.
When I want transfer some ROM to phone, I can't. Cose when I Mount USB massstorage I see phone as "Elementary sys device". I have install ABD device drivers...
Changelog I can't get you, cose it's in "SD card"...
3, Please, Show me "the way" out of this sh*t... I use HTC HD2 few years, all time flashing. Now I use Xperia S for 3 yr. All time flashing. But now I'm in a wrong way ind can't get my phone to standby
Thank you for answers!
magntwo said:
Hi,
I've really big problem and i hope that here i get sugestion...
1, I try flash new ROM to my phone. I copy ROM to "SD card" but in wrong version.
After this I into Flashtool get new Kernel and new ver. of TWRecovery. Then I go to recovery and start flashing as every time before...
2, But now I'm in bad sittuation. I can only get into recovery... When i want to go to bootloger, i can't. Every time when I go to bootloger from recovery, i'm back in recovery. Every time is phone reaction the same as I hold power up button+vol. up. And I'm only in recovery.
When I want transfer some ROM to phone, I can't. Cose when I Mount USB massstorage I see phone as "Elementary sys device". I have install ABD device drivers...
Changelog I can't get you, cose it's in "SD card"...
3, Please, Show me "the way" out of this sh*t... I use HTC HD2 few years, all time flashing. Now I use Xperia S for 3 yr. All time flashing. But now I'm in a wrong way ind can't get my phone to standby
Thank you for answers!
Click to expand...
Click to collapse
Boot phone into recovery, then run following command to copy the ROM to phone memory.
Code:
adb push /path/to/ROM.zip /sdcard/
Then flash the ROM via recovery!
Mirhawk said:
Boot phone into recovery, then run following command to copy the ROM to phone memory.
Code:
adb push /path/to/ROM.zip /sdcard/
Then flash the ROM via recovery!
Click to expand...
Click to collapse
You mean into terminal command? I need to get phone into fasboot. then I can do what I want.. Now it's dead phone... It was happend when I want to flash yours ROM. But i miss one step, flash boot.img
magntwo said:
You mean into terminal command? I need to get phone into fasboot. then I can do what I want.. Now it's dead phone... It was happend when I want to flash yours ROM. But i miss one step, flash boot.img
Click to expand...
Click to collapse
Recovery is TWRP. The one with menu of install, wipe and all. You need to boot into that and use the adb on PC.
Mirhawk said:
Recovery is TWRP. The one with menu of install, wipe and all. You need to boot into that and use the adb on PC.
Click to expand...
Click to collapse
Yes, I'm in TWRP, exactly v.2.8.0.1, from topic of your ROM. Bud now I can't connect phone via ABD drivers. I try it via apps and two ways via Commans window.
I'm only in TWRP. I can't get to fastboot, I can't install ROM now, phone reaction is the same as I hold power up+vol up button.
I need one of two ways... 1,get phone connected with PC via fastboot to flash new kernel, boot.img and at least your ROM
2,get phone connected with PC via mass storage, to get some old ROM, flash it and get to fastboot...
For example:
magntwo said:
Yes, I'm in TWRP, exactly v.2.8.0.1, from topic of your ROM. Bud now I can't connect phone via ABD drivers. I try it via apps and two ways via Commans window.
I'm only in TWRP. I can't get to fastboot, I can't install ROM now, phone reaction is the same as I hold power up+vol up button.
I need one of two ways... 1,get phone connected with PC via fastboot to flash new kernel, boot.img and at least your ROM
2,get phone connected with PC via mass storage, to get some old ROM, flash it and get to fastboot...
For example:
Click to expand...
Click to collapse
You cannot use fastboot command in recovery, You can use the adb commands only. Did Yo try pushing the ROM to phone?
Mirhawk said:
You cannot use fastboot command in recovery, You can use the adb commands only. Did Yo try pushing the ROM to phone?
Click to expand...
Click to collapse
Yes, I was... I have in "sd card" save my last ROM+gapps. As I wrote, two ways when I try it. One is Fail of flash by TWRP, second fall of TWRP during flash.
Ty for "want to help"!
magntwo said:
Yes, I was... I have in "sd card" save my last ROM+gapps. As I wrote, two ways when I try it. One is Fail of flash by TWRP, second fall of TWRP during flash.
Ty for "want to help"!
Click to expand...
Click to collapse
Ah apologies, got lost while replying.
Anyways, lets start from basic. Can You try un-installing and installing the fastboot drivers? Because I suspect that's why You are not able to enter into fastboot mode.
Mirhawk said:
Ah apologies, got lost while replying.
Anyways, lets start from basic. Can You try un-installing and installing the fastboot drivers? Because I suspect that's why You are not able to enter into fastboot mode.
Click to expand...
Click to collapse
I try it, but no way.. The same.
magntwo said:
I try it, but no way.. The same.
Click to expand...
Click to collapse
Can You try using a different PC/Laptop?
Mirhawk said:
Can You try using a different PC/Laptop?
Click to expand...
Click to collapse
I tryed my Vaio laptom and Dell laptom from my work. Both wrong... I'm completlly helplessly in this moment.
magntwo said:
I tryed my Vaio laptom and Dell laptom from my work. Both wrong... I'm completlly helplessly in this moment.
Click to expand...
Click to collapse
Just a sec, what combination do You use to go into bootloader? Power up+volume up? That is not what Yo do, You disconnect the phone from cable, and then turn off the phone. Then just press volume up, and connect the phone. No other button is needed to be pressed.
Mirhawk said:
Just a sec, what combination do You use to go into bootloader? Power up+volume up? That is not what Yo do, You disconnect the phone from cable, and then turn off the phone. Then just press volume up, and connect the phone. No other button is needed to be pressed.
Click to expand...
Click to collapse
Thank you. This is the way.. Now I'm in fastboot.... I gona flash kernel 2.8.0.1, then boot.img from your ROM and finally the ROM
magntwo said:
Thank you. This is the way.. Now I'm in fastboot.... I gona flash kernel 2.8.0.1, then boot.img from your ROM and finally the ROM
Click to expand...
Click to collapse
Finally! Follow the procedure here to flash a Kitkat/Lollipop ROM.
Mirhawk said:
Finally! Follow the procedure here to flash a Kitkat/Lollipop ROM.
Click to expand...
Click to collapse
Re: one more...
Quote:
Originally Posted by magntwo
Sorry, again...
As I wrote, I have in this moment folder with everything, nAOSP 5.0 b12, gapps-lp-20141109-signed, boot-carbon_3-11-14, beta SU v2.44, kernel v2.
As you know, two things, get this folder to phone and get fastboot, in this moment i'll be there, where I want to be
Ty!
Hi, can You please post it in a thread and tag Me? The messages kinda confuse Me!
.
Click to expand...
Click to collapse
Here we're... Thank you.
magntwo said:
Here we're... Thank you.
Click to expand...
Click to collapse
Apologies, might have missed out Your quote earlier. So You now have ROM and other stuff in the phone. What problem are You facing Now? Also I would recommend the new released version b14c with kernel from b14d of nAOSP.
Mirhawk said:
Apologies, might have missed out Your quote earlier. So You now have ROM and other stuff in the phone. What problem are You facing Now? Also I would recommend the new released version b14c with kernel from b14d of nAOSP.
Click to expand...
Click to collapse
simply... I get to bootloader as we wrote last. Then I flash kernel, and phone died. Now I can only charge or see a Sony logo. I can ONLY this now. no buttons helps, no different cable/slot/PC helps... I'M only in charging mod, after turn on only logo see. no TWRP, no bootloger.
magntwo said:
simply... I get to bootloader as we wrote last. Then I flash kernel, and phone died. Now I can only charge or see a Sony logo. I can ONLY this now. no buttons helps, no different cable/slot/PC helps... I'M only in charging mod, after turn on only logo see. no TWRP, no bootloger.
Click to expand...
Click to collapse
So You can't even go into bootloader now? That's weird and also makes this a bit complicated! Because You need to be able to go into bootloader mode to flash a new kernel which has recovery. Hope You are pressing only volume while connecting phone to PC. Drivers are fine as You were able to flash a kernel earlier. Which Kernel did You flash first? If You are able to go into bootloader, then flash this kernel via fastboot mode.
Mirhawk said:
So You can't even go into bootloader now? That's weird and also makes this a bit complicated! Because You need to be able to go into bootloader mode to flash a new kernel which has recovery. Hope You are pressing only volume while connecting phone to PC. Drivers are fine as You were able to flash a kernel earlier. Which Kernel did You flash first? If You are able to go into bootloader, then flash this kernel via fastboot mode.
Click to expand...
Click to collapse
Ok, I flash it. But I really can't into bootloader. If I hold vol button, conn cable only red, charging light... Now I really don't know what else.
magntwo said:
Ok, I flash it. But I really can't into bootloader. If I hold vol button, conn cable only red, charging light... Now I really don't know what else.
Click to expand...
Click to collapse
So You were able to flash the kernel I gave? Then You should be able to boot into CWM recovery. The Kernel logo will be of a Android bot.
Use Android 7.1 kernel.
Adb sideload work.
flashlight disabled.
all work.
Download and Update Link(Orangefox Recovery for Honor 5X will be released and updated here before I become OrangeFox Official maintainer):https://drive.google.com/drive/folders/1VIHTt92woAEYXrEsyzJL5pYTCQAOkpKI?usp=sharing
devicetree:https://gitlab.com/boomromteam/android_device_huawei_kiwi.git (fox_7.1 branch)(include prebuilt kernel)
Prebuilt kernel source link:https://github.com/LineageOS/android_kernel_huawei_kiwi (cm-14.1 branch)
20220314
Backup:
@Boom_Hacker Please Help! I selected reboot bootloader from orangefox and now instead of entering in fastboot mode, it has started entering in QHSUB_DLOAD mode. WHAT SHOULD I DO?
@Boom_Hacker I tried restoring from a backup I had made but no matter what I do, whenever it flashes, it formats one partition and whatever partition it tries to format, I simply keep losing them and now I am totally lost with this phone. Please help!! I tried flashing twrp image, it is successful but when I boot into recovery it is the same bloody orangefox.
grim_bot said:
@Boom_Hacker I tried restoring from a backup I had made but no matter what I do, whenever it flashes, it formats one partition and whatever partition it tries to format, I simply keep losing them and now I am totally lost with this phone. Please help!! I tried flashing twrp image, it is successful but when I boot into recovery it is the same bloody orangefox.
Click to expand...
Click to collapse
photo?
Boom_Hacker said:
photo?
Click to expand...
Click to collapse
Now my phone is completely dead at the moment. I can't even wipe my phone. This has become my worst nightmare. You didn't even put any warning. and It all started when I selected the option reboot to bootloader just that triggered the worst for this phone. I can't enter fastboot after that. Just that blue light start blinking now when I press volume down and power and connect cable to PC.
grim_bot said:
Now my phone is completely dead at the moment. I can't even wipe my phone. This has become my worst nightmare. You didn't even put any warning. and It all started when I selected the option reboot to bootloader just that triggered the worst for this phone. I can't enter fastboot after that. Just that blue light start blinking now when I press volume down and power and connect cable to PC.
Click to expand...
Click to collapse
i guess this is 9008 mode,you can use 9008 flash tool to back normal
grim_bot said:
Now my phone is completely dead at the moment. I can't even wipe my phone. This has become my worst nightmare. You didn't even put any warning. and It all started when I selected the option reboot to bootloader just that triggered the worst for this phone. I can't enter fastboot after that. Just that blue light start blinking now when I press volume down and power and connect cable to PC.
Click to expand...
Click to collapse
or you can flash a rom
Boom_Hacker said:
or you can flash a rom
Click to expand...
Click to collapse
I can't flash a rom from recovery
Boom_Hacker said:
or you can flash a rom
Click to expand...
Click to collapse
Please tell me which firmware I should use to flash KIW-L21 Through This Mode? I Got The Qualcomm Flash Tool
grim_bot said:
Please tell me which firmware I should use to flash KIW-L21 Through This Mode? I Got The Qualcomm Flash Tool
Click to expand...
Click to collapse
You can find the 9008ROM on the Internet by yourself, because I'm in Chinese Mainland and it's difficult to access the Internet
grim_bot said:
Please tell me which firmware I should use to flash KIW-L21 Through This Mode? I Got The Qualcomm Flash Tool
Click to expand...
Click to collapse
If you find the ROM, please let me have a look
grim_bot said:
Please tell me which firmware I should use to flash KIW-L21 Through This Mode? I Got The Qualcomm Flash Tool
Click to expand...
Click to collapse
wait,can you change to recovery mode?