This morning i just flashed the new froyo rom that the xda guys had made and it said if you was experiencing any led problems to go into adb and delete a file.
I went into adb and mounted the system, but didnt delete a file, when i came out i didnt exit, i just pulled the usb cable,
is it possible that my system is still mounted and is stuck?
when i rebooted i am stuck on a boot loop from the first htc screen and i have no way of getting into recovery...
I dont think this is a usb brick as i didnt flash anything,
im not sure what to do now;(
I cant even flash a new ruu from fastboot;(
Hope you guys can help
JD
Almost the same hapened to med yesterday, but i was able to reflash.
Take out the batery and start into recovery directly, wipe before flash.
Good luck, i hope it works out for ya.
Im not sure if this is a usb brick or not? I think with usb bricks you can still flash a ruu from fastboot, where as i cant;(
infexis said:
Almost the same hapened to med yesterday, but i was able to reflash.
Take out the batery and start into recovery directly, wipe before flash.
Good luck, i hope it works out for ya.
Click to expand...
Click to collapse
I cant get into recovery;( at all;(
getting a device not found when trying to get into recovery, i am completly stuck;( painful times;'((
You can USB-Brick without any flashing.
Can you boot into android or do you get stuck at the loop every time?
Tried booting without the SD?
Rudolfje said:
You can USB-Brick without any flashing.
Can you boot into android or do you get stuck at the loop every time?
Tried booting without the SD?
Click to expand...
Click to collapse
i get stuck at the first htc screen boot loop, cant boot without sd neither;(
i also cant flash a ruu from fastboot;(
also im not sure how to go about unbricking if its unbricked, the instructions are not very clear on modaco, and also i was using the brafrorom4 and im not sure how i would go about making a mtd0.img with that rom.
Completly bamboozled;(
JupiterDroid said:
i also cant flash a ruu from fastboot;(
Click to expand...
Click to collapse
And trying to flash a stock ROM from the built-in recovery (the one accessible with volume-up and power from the HBOOT's red triangle screen)?
Just to be clear, with the device turned off you can't get into HBOOT holding vol. down and turning it on?
@ngel said:
And trying to flash a stock ROM from the built-in recovery (the one accessible with volume-up and power from the HBOOT's red triangle screen)?
Click to expand...
Click to collapse
I have not tried that, how would i go about doing that mate?
JupiterDroid said:
I have not tried that, how would i go about doing that mate?
Click to expand...
Click to collapse
Just boot your Desire with volume-down pressed and once in the HBOOT, select RECOVERY; then, as the red triangle screen appears press volume-up and power until you reach a blue recovery console that has a "Flash from sdcard" menu entry.
Copy a stock ROM to your sdcard and flash it.
I've never tried that, but I readed that the console is able to flash HTC signed stuff, so give it a try...
EddyOS said:
Just to be clear, with the device turned off you can't get into HBOOT holding vol. down and turning it on?
Click to expand...
Click to collapse
i can get into hboot fine
JupiterDroid said:
i can get into hboot fine
Click to expand...
Click to collapse
how can i flash a ruu from the phone? i thought it had to be done from windows?
JupiterDroid said:
how can i flash a ruu from the phone? i thought it had to be done from windows?
Click to expand...
Click to collapse
Two posts above.
@ngel said:
Two posts above.
Click to expand...
Click to collapse
cheers mate, will give it a try now
it wont flash, it has a signature failure
JupiterDroid said:
it wont flash, it has a signature failure
Click to expand...
Click to collapse
Are you trying a stock, untouched HTC ROM?
@ngel said:
Are you trying a stock, untouched HTC ROM?
Click to expand...
Click to collapse
yes i beleve so, i had to rename it to update.zip to be able to flash,
i tried to flash the PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.zip rom
Related
i was going between ROMS trying out different versions. then i installed Vision BaconBits 0.3 on a Modaco DESIRE Z rom (i know, i know) & now the phone is stuck in a boot loop.
then i noticed i couldn't revert back to the stock ROM like i've done before. i wiped & tried again, but to no avail.
says MAIN VERSION is older or something like that.
i even tried the Modaco ROM again too, but nada. it fails.
oh yeah... and for some reason i got S-ON again. i'm like wtf?
so... did i brick my phone? or is there a way to get it going again?
btw, i did install ClockworkMod Recovery for G2 & did a back up before i tried out the DESIRE Z ROM.
DJ ELITE said:
i was going between ROMS trying out different versions. then i installed Vision BaconBits 0.3 on a Modaco DESIRE Z rom (i know, i know) & now the phone is stuck in a boot loop.
then i noticed i couldn't revert back to the stock ROM like i've done before. i wiped & tried again, but to no avail.
says MAIN VERSION is older or something like that.
i even tried the Modaco ROM again too, but nada. it fails.
oh yeah... and for some reason i got S-ON again. i'm like wtf?
so... did i brick my phone? or is there a way to get it going again?
Click to expand...
Click to collapse
it sounds like your phone is screwed!if there truly is no way to fix this return it for hinge issues or something,even pop the hinge if you have to lol
Try to get into clock work wipe if you can the system should try to reinstall stock , or see if you have adb access and then you can go from there . Good luck
Sent from my HTC Vision using XDA App
DJ ELITE said:
btw, i did install ClockworkMod Recovery for G2 & did a back up before i tried out the DESIRE Z ROM.
Click to expand...
Click to collapse
So your not able to Volume Down + Power and get into clockwork still? If so then why couldnt you just restore the backup you made.
thx for the expedient reponse...
bled82 said:
Try to get into clock work wipe if you can the system should try to reinstall stock , or see if you have adb access and then you can go from there . Good luck
Click to expand...
Click to collapse
the phone boot loops. how do i get in CWM?
userfriendlyme said:
So your not able to Volume Down + Power and get into clockwork still? If so then why couldnt you just restore the backup you made.
Click to expand...
Click to collapse
i can def do the Volume Down + Power. how does that get me in to CWM?
I'm still new to this so take my advice with a grain of salt but I think that "Main version is older issue" can be avoided by using the hex editor to change the build number on the ROM. Try changing the version with the hex editor as per this post:
http://forum.xda-developers.com/showthread.php?t=831398
and then try to flash it. Hopefully thats all you need to do.
pull the battery, wait a couple seconds and put back in. now hold the volume down button and press power. the phone will boot into fastboot. use volume down key to select recovery and hit the power button to confirm. if CW is still on your phone it will load, if you have s-on idk if it will load without su privilages or not im not a dev but try it.
edit: i have soft bricked my g1 like 10 times, the main thing to remember is backup, wipe wiPE WIPE! and follow instructions to a T.
DJ ELITE said:
i can def do the Volume Down + Power. how does that get me in to CWM?
Click to expand...
Click to collapse
If you can get vol dwn + pwr to work, then you can scroll to recovery. from there, you should be able to restore your backup from rom manager. If it's not in that one, then hold trackpad button + power and scroll to recovery.
if you can get into the clockwork recovery and can successfully get adb to recognize the phone, try the downgrade from OTA. it will restore your phone back to out of the box.
http://forum.xda-developers.com/showthread.php?t=831398
you might need a usb microsd reader to get the files onto and off of the sd card
thx for the reponses...
Azrael3123 said:
I'm still new to this so take my advice with a grain of salt but I think that "Main version is older issue" can be avoided by using the hex editor to change the build number on the ROM. Try changing the version with the hex editor as per this post:
http://forum.xda-developers.com/showthread.php?t=831398
and then try to flash it. Hopefully thats all you need to do.
Click to expand...
Click to collapse
yikes... sounds a lil too experimental to me. thx for chiming in tho. truly appreciated.
EdTeach1680 said:
pull the battery, wait a couple seconds and put back in. now hold the volume down button and press power. the phone will boot into fastboot. use volume down key to select recovery and hit the power button to confirm. if CW is still on your phone it will load, if you have s-on idk if it will load without su privilages or not im not a dev but try it.
edit: i have soft bricked my g1 like 10 times, the main thing to remember is backup, wipe wiPE WIPE! and follow instructions to a T.
Click to expand...
Click to collapse
yeah... i don't see CMW.
digikid said:
If you can get vol dwn + pwr to work, then you can scroll to recovery. from there, you should be able to restore your backup from rom manager. If it's not in that one, then hold trackpad button + power and scroll to recovery.
Click to expand...
Click to collapse
in RECOVERY i don't see ROM MANAGER. just the standard:
Rebooty system now
Apply sdcard:update.zip
Wipe data/factory reset
Wipe cache partition
thx for the response.
pr0naLd said:
if you can get into the clockwork recovery and can successfully get adb to recognize the phone, try the downgrade from OTA. it will restore your phone back to out of the box.
http://forum.xda-developers.com/showthread.php?t=831398
you might need a usb microsd reader to get the files onto and off of the sd card
Click to expand...
Click to collapse
i'm using my old HTC Rhodium to rename/transer files on the SD.
unfortunately... no CMW that i can see.
I can understand your hesitation but if you read through the post you will see that many people have tested it and it should work fine. At this point its the only way to downgrade to stock due to the "Main version is older" issue and, assuming you truly can't access clockwork recovery, I don't see what other method there is. Whats really got me twisted is the S-on part; I could've predicted some issue by flashing BB onto the Z rom but I wouldn't have seen that coming. Is it even possible to flash anything while S-on is enabled?
maybe you can use an offical update.zip that is signed. i dunno
DJ ELITE said:
in RECOVERY i don't see ROM MANAGER. just the standard:
Rebooty system now
Apply sdcard:update.zip
Wipe data/factory reset
Wipe cache partition
Click to expand...
Click to collapse
Hmmm...then you didn't install the CWM recovery. You should try to flash the rom that shipped with the phone. You can get it here. To do that, you need to get it onto your memory card as update.zip, then boot to recovery and choose "Apply sdcard:update.zip" and then you should have a bootable phone again.
thx for the reponses...
Azrael3123 said:
I can understand your hesitation but if you read through the post you will see that many people have tested it and it should work fine. At this point its the only way to downgrade to stock due to the "Main version is older" issue and, assuming you truly can't access clockwork recovery, I don't see what other method there is. Whats really got me twisted is the S-on part; I could've predicted some issue by flashing BB onto the Z rom but I wouldn't have seen that coming. Is it even possible to flash anything while S-on is enabled?
Click to expand...
Click to collapse
don't get me wrong, i feel u. i may have no choice but to try that. i'm getting desperate.
however, the current ROM loaded is the Modaco DESIRE Z w/the Vision BaconBits 0.3 updated to it... and after that, it kept boot looping. plus the fact that i have S-ON.
supergear said:
maybe you can use an offical update.zip that is signed. i dunno
Click to expand...
Click to collapse
have em. renamed em. tried em. (e.g.: PC10IMG.zip[, updated.zip)
oh that sucks
I was stuck in the same boat as you were. I had a stock rom permarooted and messed up editting on of the /system/ files. and got stuck with endless reboot. i then flashed this: [ROM] Desire Z Sense on the G2 (via HBOOT) because it was the only rom out at the time. It successfully loaded, but i wanted to go back to stock. i then flashed the OTB rom and got stuck with a desire z rom with s-on. No other rom would flash so i proceeded to temp-root and do the downgrade from OTA.
You lost root. Have to install the PC10.img and re-root.
Sent from my T-Mobile G2 using XDA App
But in order to edit the files necessary to flash down to the stock ROM, he needs to have at least temp root so he can pull and edit the misc.img (I think). If he has S-on and is stuck in a boot loop, how can he access visionary or terminal emulator in order to set up that temp root? I think that's the biggest issue unless I'm missing something.
Shouldn't the stock rom have everything that's needed? Plus it's signed so it should flash with s-on.
method, what else could I do?
LexLuger82 said:
method, what else could I do?
Click to expand...
Click to collapse
You can run a RUU from your computer.
http://forum.xda-developers.com/showthread.php?t=884060
(.exe)
what are you trying to do? more info would be helpful.
ocnbrze said:
what are you trying to do? more info would be helpful.
Click to expand...
Click to collapse
Probably have his phone boot past the white screen.
im trying to get past the white title screen so i can flash back to factory, i flashed the wrong rom for another phone by accident and it stuck at the white screen. I did a factory reset and put the ruu file on sd and rebooted but it did nothing
LexLuger82 said:
im trying to get past the white title screen so i can flash back to factory, i flashed the wrong rom for another phone by accident and it stuck at the white screen. I did a factory reset and put the ruu file on sd and rebooted but it did nothing
Click to expand...
Click to collapse
Yeah that could be pretty serious.
Try running a RUU like I said.
mattykinsx said:
Yeah that could be pretty serious.
Try running a RUU like I said.
Click to expand...
Click to collapse
whats the process?
LexLuger82 said:
whats the process?
Click to expand...
Click to collapse
Download a .exe from that link.
Plug phone in and run it.
mattykinsx said:
Download a .exe from that link.
Plug phone in and run it.
Click to expand...
Click to collapse
put it in hboot when im doing this or at the white screen?
What did you do to get it in that condition?
GrandWorks said:
What did you do to get it in that condition?
Click to expand...
Click to collapse
flash rom for wrong phone
I hope I'm wrong, but flashing a different phone's rom is probably not something you can fix
Swyped From The Hippest Phone Using XDA Premium
LexLuger82 said:
put it in hboot when im doing this or at the white screen?
Click to expand...
Click to collapse
You know what I'm not sure there's a difference.
Try in hboot first and if that doesn't work try on the white screen.
Best of luck.
bump this........
LexLuger82 said:
bump this........
Click to expand...
Click to collapse
The RUU didn't work?
mattykinsx said:
The RUU didn't work?
Click to expand...
Click to collapse
so i go to h boot usb, click it, and then hit the exe file?
LexLuger82 said:
bump this........
Click to expand...
Click to collapse
If the RUU isn't detecting the phone, try running it while in fastboot usb. To do that, boot to your bootloader. Select the 'fastboot' option. Then plug your evo in to the USB. It should say 'fastboot usb' now. At this point, try running the RUU. It should detect the phone and run from fastboot usb. When you tried the PC36IMG.zip, and it failed, what happened? Did it give you any errors? Did it not detect the PC36IMG? The more detail you leave here, the better help we'll all be able to give you. What hboot version are you on? We could try using fastboot to erase EVERYTHING in your phone, then try the RUU from a clean slate.
EDIT: Also, for the RUU to work, you do need to have HTC Sync installed on your computer. It contains the required drivers for the RUU to work.
i got the pcimg file installed, and was about to get it to power up factory, but my problem is when im trying to get into recover it hangs and goes to a black screen with a triangle and exclamation mark, what is causing this? also i know im s off
LexLuger82 said:
i got the pcimg file installed, and was about to get it to power up factory, but my problem is when im trying to get into recover it hangs and goes to a black screen with a triangle and exclamation mark, what is causing this? also i know im s off
Click to expand...
Click to collapse
Go to a on recovery thread and download the pc36img.zip to flash recovery. Once done go into your nandroids and restore if hopefully you have some and you did nandroids with A on. If not go to the clockwork thread and look for their recovery and see if there is an boot method to flash it. Then you can try and wipe all or run caulkins wipe all and flash thru recovery
Edit: that Amon and not A on
LexLuger82 said:
i got the pcimg file installed, and was about to get it to power up factory, but my problem is when im trying to get into recover it hangs and goes to a black screen with a triangle and exclamation mark, what is causing this? also i know im s off
Click to expand...
Click to collapse
That is stock recovery. When you ran the RUU, it would have taken your phone back to Stock, out of the box.
Are you still S-Off?? (Check in Bootloader, at the top of the screen)
If you are, search Amon Ra Recovery, get the PC36IMG and put it on the root of your SDCard, and then reboot to Hboot (Vol-Dwn & Pwr at the same time)
It should discover the file, ask you to update, say yes, then it will flash recovery on your phone. Once it's done flashing, it will restart hboot, find the file again, ask you to upgrade, this time say no, then scroll to recovery and hit power button to enter. Now, you're in recovery, you can clear your caches and flash a ROM, IF you didn't screw things up by flashing the ROM from the other phone.
Matter of fact, since you have RUU flashed, you may want to just try to boot up normally before anything else, just to see what happens.
My phone went off today and i dont know why, i tried to swtich him on, but nothing...later it switched on and staied in boot (green word HTC), i tried to wait some time but it didnt do something for a hour. I also trid to chnage battery, no reaction.
Any advices please?
Can you get into recovery/bootloader?
i can get into bootloader but not into recovery
I can get to fastboot usb, maybe i can do there something?
majky11 said:
I can get to fastboot usb, maybe i can do there something?
Click to expand...
Click to collapse
Yes, if you are S-OFF, then flash recovery again and then a custom rom....
I have S-off and i did it, flashed new recovery and tried to get into recovery, but still phone is stucked in boot
majky11 said:
I have S-off and i did it, flashed new recovery and tried to get into recovery, but still phone is stucked in boot
Click to expand...
Click to collapse
But have you flashed a Rom after flashing recovery? You don't have a Rom, that is why you ate stuck at boot
Sent from my Inspire 4G using XDA
i couldn't get into recovery..., so i couldn't flash new ROM
majky11 said:
i couldn't get into recovery..., so i couldn't flash new ROM
Click to expand...
Click to collapse
But are u able to boot into hboot??
This sounds like a stuck volume button.
Or you're just doing something wrong...
glevitan said:
But are u able to boot into hboot??
Click to expand...
Click to collapse
yes i am
everytime i go into hboot, PD98img is loading and updating from SD card, then i boot phone ad still nothing
Volume button is ok
majky11 said:
yes i am
everytime i go into hboot, PD98img is loading and updating from SD card, then i boot phone ad still nothing
Volume button is ok
Click to expand...
Click to collapse
If you have a PD98IMG.zip image in the sdcard erase it. Then flash a recovery....there's no need to have a PD98IMG file in the sdcard....
Here's a video tutorial on how to root your Nexus 10 for noobs!
Windows video tutorial:
Mac video tutorial:
Linux video tutorial:
All the files you need in one zip (adb+SuperSU+fastboot+Windows drivers):
http://downloadandroidrom.com/file/Nexus10/Nexus10RootNew.zip
Step-by-Step tutorial with photos here:
http://nexus10root.com/nexus-10-root/how-to-root-nexus-10-easiest-method/
Also, if you get stuck on bootloop after unlocking bootloader (This happened to me couple times), do a factory reset in stock recovery to fix:
Thanks to shimp208 for the sideload method and working CWM, ChainFire for awesome SuperSU and to all the developers who are worked on CWM recovery!
So the CWM that was just updated by Koushik on CWM does not work properly or does it work? Was asking based on this
While CWM Recovery is still being fixed
Click to expand...
Click to collapse
Edit: There's no driver issue if it were on a Mac right? Especially adb sideloading the CWM SuperSu zip?
How do I flash the stock recovery? CWM isn't working and I tried to update the driver like in the video but couldn't find the "manta" that I needed to update. I'm just stuck in bootloop animation now. I'm downloading the stock image right now to try and flash it back to stock..
johno86 said:
How do I flash the stock recovery? CWM isn't working and I tried to update the driver like in the video but couldn't find the "manta" that I needed to update. I'm just stuck in bootloop animation now. I'm downloading the stock image right now to try and flash it back to stock..
Click to expand...
Click to collapse
If you go into fastboot mode then choose recovery to get to the screen with the red triangle, keep pressing the power button and volume buttons randomly until the stock recovery pops up. From there do a factory reset and it'll work, I just did it to mine!
I flashed the CWM recovery img so when I do what you say it takes me to the bootloader screen and says Downloading. No red triangle. It boots into CWM and then after 20 seconds restarts itself and hits the bootanimation loop. Any clue what to do next? Trying to flash the stock image but having issues using cmds in windows cmd
*edit
I cleared cache through cmd and i got to the red triangle...thank ****ing the lord. DTWAZERE, I will remember tonight. Thank you for your help.
johno86 said:
I flashed the CWM recovery img so when I do what you say it takes me to the bootloader screen and says Downloading. Any clue what to do next? Trying to flash the stock image but having issues getting it into fastboot now...
Click to expand...
Click to collapse
Thing is it will delete the CWM recovery when you leave it so you'll have to reflash it, which is why this is so unstable!
I had the exact same thing as you and this is what I did:
Press the power button to turn it off while it says downloading
Hold both volume buttons down and power on to get into fastboot
Choose recovery
Press power and volume buttons randomly when the red triangle appears until you get stock recovery
Choose Factory Reset
Reboot
You should be able to get back into the rom that way,
to root it you need to boot into fastboot again, reflash the recovery, and sideload the superuser apk
dtwazere said:
Thing is it will delete the CWM recovery when you leave it so you'll have to reflash it, which is why this is so unstable!
I had the exact same thing as you and this is what I did:
Press the power button to turn it off while it says downloading
Hold both volume buttons down and power on to get into fastboot
Choose recovery
Press power and volume buttons randomly when the red triangle appears until you get stock recovery
Choose Factory Reset
Reboot
You should be able to get back into the rom that way,
to root it you need to boot into fastboot again, reflash the recovery, and sideload the superuser apk
Click to expand...
Click to collapse
Yeah this is exactly what I did and it worked. I'll wait on flashing anything until there's a stable recovery. I was fairly confident in what I was doing until that happened. Not being able to input commands from cmd prompt made me sick so I'll wait for a dev to release something that works without having to quickly install the drivers again within a 15-20 second timeframe. Too much stress.
cant boot
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?
lc684760 said:
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?
Click to expand...
Click to collapse
Heh im having the same issue.
lc684760 said:
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?
Click to expand...
Click to collapse
I'm having the same issue. Stuck on the 2nd splash screen with the Nexus Logo.
I received successful messages after every entry.
deevooneh said:
I'm having the same issue. Stuck on the 2nd splash screen with the Nexus Logo.
I received successful messages after every entry.
Click to expand...
Click to collapse
sucks. But we can boot in fastboot and downloading . I think we may have some tricks to fix.
i did everything, and it all went successfully after a few tried. Now i am stuck with the JB X load screen.
How do i get the stock google rom and how do i flash it?
lc684760 said:
sucks. But we can boot in fastboot and downloading . I think we may have some tricks to fix.
Click to expand...
Click to collapse
Ok. Let me know if you figure something out. Hopefully we didnt brick it.
deevooneh said:
Ok. Let me know if you figure something out. Hopefully we didnt brick it.
Click to expand...
Click to collapse
I just called service phone. But goole play agent told me that they didnt know how to deal with that. Its the new device. They dont know much. Damn it!
lc684760 said:
I just called service phone. But goole play agent told me that they didnt know how to deal with that. Its the new device. They dont know much. Damn it!
Click to expand...
Click to collapse
How do we get back to stock? Might need to reattempt this.
If you are stuck on the boot animation (X) screen... power off your device and enter fastboot mode and then type fastboot -w... I has this problem and this fixed it!
NOTE: fastboot -w will wipe your internal storage completely
dtwazere said:
If you go into fastboot mode then choose recovery to get to the screen with the red triangle, keep pressing the power button and volume buttons randomly until the stock recovery pops up. From there do a factory reset and it'll work, I just did it to mine!
Click to expand...
Click to collapse
deevooneh said:
How do we get back to stock? Might need to reattempt this.
Click to expand...
Click to collapse
Stock is here
https://developers.google.com/android/nexus/images#mantarayjop40c
Still need a way to get CWM stable, so we have time to copy to sd
craigacgomez said:
If you are stuck on the boot animation (X) screen... power off you devices and enter fastboot mode and then type fastboot -w... I has this problem and this fixed it!
NOTE: fastboot -w will wipe your internal storage completely
Click to expand...
Click to collapse
THIS WORKED!!
Youre a genius. thanks!
When I try to install the manta drivers manually and tell it to search the same area that it searched and found the android bootloader drivers for fastboot mode it says that the drivers couldn't be found and installed. Am I missing something? Also if i try to do fastboot flash recovery it gives me an error message stating that it cannot determine the image filename for the recovery image.
Well i guess i did it the long way around.
Went to https://developers.google.com/android/nexus/images#mantarayjop40c
and downloaded the Nexus 10 file. extracted, and the actual files in the Nexus10Root folder.
Opened the flash-all.sh and entered each command manually because it was erroring out running the script.
After the 3rd command it booted right into android!
hia,
My HOX won't start up anymore.
Ive been trying to install ARHD 31.0 wich didnt work out very well.
When im in bootloader and select recovery or factory reset my phone starts up TWRP v2.4.1.0.
In TWRP the touchscreen doenst work so basicly i cant do a thing.
Anyone an idea to get my phone back working?
Thanks in advance,
Meganza
meganza said:
hia,
My HOX won't start up anymore.
Ive been trying to install ARHD 31.0 wich didnt work out very well.
When im in bootloader and select recovery or factory reset my phone starts up TWRP v2.4.1.0.
In TWRP the touchscreen doenst work so basicly i cant do a thing.
Anyone an idea to get my phone back working?
Thanks in advance,
Meganza
Click to expand...
Click to collapse
You need to flash a new recovery I think,
I think touch is supported with TWRP 2.5 or 2.6, or philz touch recovery.
I believe that if you flash the new TWRP over the old one, your backups are safe and touch is restored.
Stefan0vic said:
You need to flash a new recovery I think,
I think touch is supported with TWRP 2.5 or 2.6, or philz touch recovery.
I believe that if you flash the new TWRP over the old one, your backups are safe and touch is restored.
Click to expand...
Click to collapse
Replaced it with TWRP 2.6, TWRP doesnt even start up now anymore.
meganza said:
Replaced it with TWRP 2.6, TWRP doesnt even start up now anymore.
Click to expand...
Click to collapse
Have you done:
fastboot flash recovery recovery.img
fastboot erase cache?
also, are you sure that after you installed the rom, you flashed the corresponding boot.img? Else it will not boot up.
otherwise try to flash this: http://forum.xda-developers.com/showthread.php?t=2240646
Stefan0vic said:
Have you done:
fastboot flash recovery recovery.img
fastboot erase cache?
also, are you sure that after you installed the rom, you flashed the corresponding boot.img? Else it will not boot up.
otherwise try to flash this: http://forum.xda-developers.com/showthread.php?t=2240646
Click to expand...
Click to collapse
phone is in an constant reboot now... cant really do anything...
meganza said:
phone is in an constant reboot now... cant really do anything...
Click to expand...
Click to collapse
can you still get into bootloader?
meganza said:
phone is in an constant reboot now... cant really do anything...
Click to expand...
Click to collapse
1)hold power button down till bottom light starts to flash and phone turns
2)hold vol- and power button together do not let go power button till you get to hboot screen ie bootloader
Stefan0vic said:
can you still get into bootloader?
Click to expand...
Click to collapse
Got into my bootloader. In there it says "battery level to low to flash".
When i say "power off" it will automaticly power on again.
meganza said:
Got into my bootloader. In there it says "battery level to low to flash".
When i say "power off" it will automaticly power on again.
Click to expand...
Click to collapse
Have a look here
http://forum.xda-developers.com/showthread.php?t=1658084&page=1
Stefan0vic said:
Have a look here
http://forum.xda-developers.com/showthread.php?t=1658084&page=1
Click to expand...
Click to collapse
thanks i can now install a new recovery
edit: installed the philztouch as recommened above. allthough it is installed it wont boot to it.
I can see the logo's on the bottom for a sec or 2 then my phone just restarts.
Edit: found some .exe ruu's online wich work but im getting a 140 error wich means version error.
I have version 3.20.xxx on my phone and can only find 3.14.xx online anyone an idea?
meganza said:
thanks i can now install a new recovery
edit: installed the philztouch as recommened above. allthough it is installed it wont boot to it.
I can see the logo's on the bottom for a sec or 2 then my phone just restarts.
Edit: found some .exe ruu's online wich work but im getting a 140 error wich means version error.
I have version 3.20.xxx on my phone and can only find 3.14.xx online anyone an idea?
Click to expand...
Click to collapse
There are no RUU's ..
Best thing to do is to get your recovery working.
Are you sure that after you flashed the recovery you did:
fastboot erase cache
and are you sure your phone is international?
Stefan0vic said:
There are no RUU's ..
Best thing to do is to get your recovery working.
Are you sure that after you flashed the recovery you did:
fastboot erase cache
and are you sure your phone is international?
Click to expand...
Click to collapse
My phone is international. not branded.
But came a bit further now.
Installed ar hd 31, but it wont boot up.
It is flashed properly ( it says it does) but when i reboot i get a with screen with the green HTC letters.
meganza said:
My phone is international. not branded.
But came a bit further now.
Installed ar hd 31, but it wont boot up.
It is flashed properly ( it says it does) but when i reboot i get a with screen with the green HTC letters.
Click to expand...
Click to collapse
and did you flash boot.img?
Stefan0vic said:
and did you flash boot.img?
Click to expand...
Click to collapse
how do i do that?
meganza said:
how do i do that?
Click to expand...
Click to collapse
in your rom zip, extract it there's a boot.img
copy it into your fastboot folder and go to cmd
type following:
fastboot flash boot boot.img
fastboot erase cache
reboot the phone
it's working again.! THANKS!
meganza said:
error cannot load 'boot.img' unkown error
Click to expand...
Click to collapse
boot.img refers to the actual boot.img you have so you need the correct path to it.
or simple do:
fastboot flash boot (then drag on the boot.img file) 'return'
gffmac said:
boot.img refers to the actual boot.img you have so you need the correct path to it.
or simple do:
fastboot flash boot (then drag on the boot.img file) 'return'
Click to expand...
Click to collapse
flashed it and erased the cache. still nog booting.
Got a with screen saying HTC ONE beats audio
meganza said:
flashed it and erased the cache. still nog booting.
Got a with screen saying HTC ONE beats audio
Click to expand...
Click to collapse
Leave it to boot for a couple of minutes. If you flashed the boot.img right it should boot up.
meganza said:
flashed it and erased the cache. still nog booting.
Got a with screen saying HTC ONE beats audio
Click to expand...
Click to collapse
The first boot, does take some time....
Or go into recovery do a factory reset and reinstall rom, you can mount usb from recovery to if you need to copy the rom.zip onto the phone.