Hi all
I am currently running TWRP and CM10.1 and looking to return to stock. I have tried running an Orange UK RUU that I found but it gives me a version error.
The info I have is as follows:
version-main: 3.16.61.6
cid: ORANG001
hboot: 1.36.0000
radio: 5.1204.163R.30
Not sure how much of that information is necessary! Sadly, I have no backup of my stock ROM... ooops.
Any help pointing me in a direction that would get me back up and running would be awesome.
Thanks
James
Look here
http://forum.xda-developers.com/showthread.php?t=2104672
bihslk said:
Look here
http://forum.xda-developers.com/showthread.php?t=2104672
Click to expand...
Click to collapse
Cheers, will check that out. Currently trying to restore nandroid backup from here: http://forum.xda-developers.com/showthread.php?t=1975140
Will let you know how it goes.
ye you can use nandroid 2. remember to flash stock recovery for your hboot and kernel boot.img or you will have bootloop
Skickat från min HTC One X via Tapatalk 2
---------- Post added at 01:14 PM ---------- Previous post was at 01:12 PM ----------
if its same cid that you have then relock you bootloader after youre finish. if cid from nandroid not matching your cid then dont relock or you will have bootloop. only when you got an ota then after that you can relock. or just leave it alone
Skickat från min HTC One X via Tapatalk 2
bihslk said:
ye you can use nandroid 2. remember to flash stock recovery for your hboot and kernel boot.img or you will have bootloop
Skickat från min HTC One X via Tapatalk 2
---------- Post added at 01:14 PM ---------- Previous post was at 01:12 PM ----------
if its same cid that you have then relock you bootloader after youre finish. if cid from nandroid not matching your cid then dont relock or you will have bootloop. only when you got an ota then after that you can relock. or just leave it alone
Skickat från min HTC One X via Tapatalk 2
Click to expand...
Click to collapse
The restore from nandroid worked a treat - back to stock recovery and re-locked bootloader. Thanks for taking the time to respond.
surrealjam said:
The restore from nandroid worked a treat - back to stock recovery and re-locked bootloader. Thanks for taking the time to respond.
Click to expand...
Click to collapse
No problem. We are here to help eachother :.-)
Related
Hello
im trying to get back to Stock rom i've backup when i rooted my cellfone Now i want to go back to Stock ive my back and ive restored it now how can i go back to Stock stuck with this Error when i relock my bootloader
******Relocked*******
**Security Warning***
Stuck there till i wont unlock my bootloader again
i was doing google, xda i saw to Flash RUU the fone will get back to Stock
HBOOT 2.17.206.2
New one is 2.26 sumthing
any Idea??
Need help
You want to unlock your bootloader again?
Sent from my HTC One X using xda premium
---------- Post added at 10:20 PM ---------- Previous post was at 10:17 PM ----------
Are you using the right RUU?
Use this fastboot command: fastboot getvar version-main
For getting the right Ruu version
Sent from my HTC One X using xda premium
makov said:
Hello
im trying to get back to Stock rom i've backup when i rooted my cellfone Now i want to go back to Stock ive my back and ive restored it now how can i go back to Stock stuck with this Error when i relock my bootloader
******Relocked*******
**Security Warning***
Stuck there till i wont unlock my bootloader again
i was doing google, xda i saw to Flash RUU the fone will get back to Stock
HBOOT 2.17.206.2
New one is 2.26 sumthing
any Idea??
Need help
Click to expand...
Click to collapse
take a look right here http://forum.xda-developers.com/showthread.php?t=1859714
Hello Guys,
yesterday I tried to flash cyanogenmod 10.1 on my phone an i got this error.
assert failed: getprop("ro.bootloader") == "1.28.0000"
My CID is VODAP102 an I think the problem is that i have a to old Version of hboot für this rom.
when i use the command
fastboot getvar version-main
i got the answer
version-main: 1.28.161.9
Is this my hboot version?
Can anyone help me.
My Handy is hanging in a bootloop now. :crying:
That is your main version.
Hboot you can read in the bootloader. Probably you will have to update hboot, because 1.28.xxx is rather old...
Послато са HTC One X користећи Тапаток 2
---------- Post added at 12:37 PM ---------- Previous post was at 12:34 PM ----------
I also suggest you switch of your phone, charge the battery and restore the nandroid (if you have made it).
Specific VODAP102 nandroid (hboot 1.36) you can find in General theme.
Послато са HTC One X користећи Тапаток 2
Nandroid Backup
[email protected]|-|oR said:
That is your main version.
Hboot you can read in the bootloader. Probably you will have to update hboot, because 1.28.xxx is rather old...
Послато са HTC One X користећи Тапаток 2
---------- Post added at 12:37 PM ---------- Previous post was at 12:34 PM ----------
I also suggest you switch of your phone, charge the battery and restore the nandroid (if you have made it).
Specific VODAP102 nandroid (hboot 1.36) you can find in General theme.
Послато са HTC One X користећи Тапаток 2
Click to expand...
Click to collapse
I havent´t made a nandroid backup.
Can send me a link of the nandroid backup and tell me how I can import it
(In wich folder shold I put the File)
-Edit-
I found the File.
But can you tell me where I have to copy it to make an restore of it
Nathalem said:
I found the File.
But can you tell me where I have to copy it to make an restore of it
Click to expand...
Click to collapse
I hope you found mine 3.14 cwm nandroid in matt's collection theme.
There is also a thorough explanation how to restore it. Can't post link right now, sorry. Go to general and read first few posts in matt's theme.
Послато са HTC One X користећи Тапаток 2
---------- Post added at 01:58 PM ---------- Previous post was at 01:54 PM ----------
Here you are:
[COLLECTION]Stock Nandroid Backups for Different CIDs
Hope it works this way...
Послато са HTC One X користећи Тапаток 2
no success
[email protected]|-|oR said:
I hope you found mine 3.14 cwm nandroid in matt's collection theme.
There is also a thorough explanation how to restore it. Can't post link right now, sorry. Go to general and read first few posts in matt's theme.
Послато са HTC One X користећи Тапаток 2
---------- Post added at 01:58 PM ---------- Previous post was at 01:54 PM ----------
Here you are:
[COLLECTION]Stock Nandroid Backups for Different CIDs
Hope it works this way...
Послато са HTC One X користећи Тапаток 2
Click to expand...
Click to collapse
i restored with your vodap102 file an is stuck when the vodafone logo appears.
then it makes a reboot after an minute.
There are no errors while the restore.
Nathalem said:
i restored with your vodap102 file an is stuck when the vodafone logo appears.
then it makes a reboot after an minute.
There are no errors while the restore.
Click to expand...
Click to collapse
Did you flash stock boot.img and recovery.img?
Usually, when HOX gets into bootloop, it's because boot.img is missing. You should find the one in my nandroid. Flaash it, and see how it goes.
[email protected]|-|oR said:
Did you flash stock boot.img and recovery.img?
Usually, when HOX gets into bootloop, it's because boot.img is missing. You should find the one in my nandroid. Flaash it, and see how it goes.
Click to expand...
Click to collapse
I just flashed the boot.img
Now i startet fastboot in my bootloader
flashed the recovery.img 2 times with the command
fastboot flash recovery recovery.img
the answer was 2 times [Okay]
then i flashed boot.img 2 times with the command
fastboot flash boot boot.img
the answer was 2 times [Okay] again.
then i started recovery with my smartphone
then i restored your nandroid -> completly Successfull
Now im hanging in the startscreen "quietly brilliant"
my hboot version ist 0.94.0000. Could that be the reason?
if it is so, can you tell me how to update it and send me a link of the correct version.
I found an .exe file but is wasn´t executable
Nathalem said:
I just flashed the boot.img
Now i startet fastboot in my bootloader
flashed the recovery.img 2 times with the command
fastboot flash recovery recovery.img
the answer was 2 times [Okay]
then i flashed boot.img 2 times with the command
fastboot flash boot boot.img
the answer was 2 times [Okay] again.
then i started recovery with my smartphone
then i restored your nandroid -> completly Successfull
Now im hanging in the startscreen "quietly brilliant"
my hboot version ist 0.94.0000. Could that be the reason?
if it is so, can you tell me how to update it and send me a link of the correct version.
I found an .exe file but is wasn´t executable
Click to expand...
Click to collapse
I am not completely sure about it, because this action should have updated your firmware, too. Is your hboot 0.94 after restoring nandroid?
If so, find proper firmware (1.36 as minimum), and flash it, too. It should be in general, or q&a section, I can't remember right now. It should be .img or .zip file I think.
Also, try wiping cache, that might be also a reason for your problems.
Remember to keep your battery well charged!
EDIT: Found it! HERE YOU ARE
EDIT 2: In combination with - THIS ONE
[email protected]|-|oR said:
I am not completely sure about it, because this action should have updated your firmware, too. Is your hboot 0.94 after restoring nandroid?
If so, find proper firmware (1.36 as minimum), and flash it, too. It should be in general, or q&a section, I can't remember right now. It should be .img or .zip file I think.
Also, try wiping cache, that might be also a reason for your problems.
Remember to keep your battery well charged!
EDIT: Found it! HERE YOU ARE
EDIT 2: In combination with - THIS ONE
Click to expand...
Click to collapse
The downloadlink für my CID is down :crying: and all Links in the 2. link you postet, too
Is it possible to change my CID?
EPIC WIN
I found a RUU and it works. Thanks so much.
Nathalem said:
I found a RUU and it works. Thanks so much.
Click to expand...
Click to collapse
Very good! :good:
Now make sure you make your own nandroid, and keep it safe!
Nathalem said:
I found a RUU and it works. Thanks so much.
Click to expand...
Click to collapse
Hello... could you please share that RUU you found? If you can't provide link here, try PM me...
Thanks a lot in advance!
gianborrello said:
Hello... could you please share that RUU you found? If you can't provide link here, try PM me...
Thanks a lot in advance!
Click to expand...
Click to collapse
You can acces the available ruu's via this thread
http://forum.xda-developers.com/showthread.php?t=2094113
But is has to match your main version. Lower ruu won't work
gianborrello said:
Hello... could you please share that RUU you found? If you can't provide link here, try PM me...
Thanks a lot in advance!
Click to expand...
Click to collapse
I think i found it hear
http://www.handy-faq.de/forum/htc_o...c_one_x_ruus_stock_roms_nandroid_backups.html
I searched for ruu an my radio number.
Hi guys, I was trying to get my HTC M8 back to stock from VenomOneM8 ROM.
I was using the Venom ROM earlier, but now I want to update my M8 to marshmallow.
I was trying to returning all to stock, first was flashing stock recovery,then locking the bootloader and using the RUU to return to stock.
When running the RUU, I realise that the RUU is not working because it is a different region RUU. I read a post on XDA and someone said U/UL version can use the international RUU (.401).
Are there anyways to get out of this?
My region code is .710
CID: HTC__039
It's:
Bootloader relocked
Stock recovery
S-ON
No OS
4.20.710.5
Thank you
Hi,
Did you flash the stock kernel back before you lock the bootloader?
BelDev said:
Did you flash the stock kernel back before you lock the bootloader?
Click to expand...
Click to collapse
Why would this make a difference?
---------- Post added at 12:55 PM ---------- Previous post was at 12:48 PM ----------
If no RUU exists for your version, the proper way to return to stock would be to: unlock the bootloader again (HTCDev.com process), then use the following guide to re-install TWRP, flash stock TWRP backup 4.20.710.5, than restore corresponding stock recovery. After that, you should be able to update (assuming the update is rolling out for your version).
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
Sorry for my bad english.. i'm newbie in here.
My HTC ONE M8 got White screen death or stuck on HTC logo after failed flashing supersu.
can somoene help me and solve my problem? thanks before..
My Htc one m8 asian version, official rom marshmallow (i dont remember version update), unlock bootloader, installed twrp-2.8.5.0-m8.
No nandroid backup ?
Skickat från min HTC One M9 via Tapatalk
Roobwz said:
No nandroid backup ?
Skickat från min HTC One M9 via Tapatalk
Click to expand...
Click to collapse
no i dont have nandroid backup
nusn said:
installed twrp-2.8.5.0-m8.
Click to expand...
Click to collapse
Why that version? Its a few iterations old, at this point.
What version SuperSU? You probably also flashed an obsolete version of SuperSU, which resulted in no boot (common mistake).
Restore the stock nandroid from the collection: http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
If you need help finding the right version number to restore, do a fastboot getvar all, and post the results (delete IMEI and serial number before posting).
---------- Post added at 10:30 AM ---------- Previous post was at 10:28 AM ----------
nusn said:
no i dont have nandroid backup
Click to expand...
Click to collapse
You should always make a TWRP backup (nandroid) before any mod, such as root, flashing a ROM, etc.
For the very reason that you encountered: stuff just goes wrong sometimes, or you make mistakes.
Hey guys,
i have a european HTC 10 with root, stock android 6, s-on and Team Win Recovery Projekt 3.0.2-6. I wanna go to full stock (stock recovery) and update to official Nougat
I googled and found people saying to use RUU. My CID is HTC_034 and I downloaded RUU zip for this CID.
I put it on my root sd card and enter downlaod mdoe wit hvol down and power, confirm with vol up and get a error that something is missing. (Edit: 19 RU_MAIN_VER_FAIL os-version in adnroid-info missing or i)
Did I do something wrong? Or is my dl corrupt?
are there other ways?
Is this way also for stock recovery?
thanks in advance
Info from dl mode
Unlocked
htc-pmeuhl PVT s-on
LK-1.0.0.0000
[email protected]
0penDSP v18.3.8996.00524_0721
0s- 1.95.401.4
PS: Do i need to lock my phone following this guide first? https://forum.xda-developers.com/htc-10/how-to/guide-safely-set-bootloader-to-locked-t3386456
No need to lock. Did you rename the zip on your SD card ?
timbohobbs said:
No need to lock. Did you rename the zip on your SD card ?
Click to expand...
Click to collapse
yes, i named it to 2PS6IMG. it starts but then gives the error.
I tried it now with RUU for 1.95.401.4 and the same error
Can I skip RUU and go directly to fastboot for twrp backup and stockrecovery?
levibuko said:
yes, i named it to 2PS6IMG. it starts but then gives the error.
I tried it now with RUU for 1.95.401.4 and the same error
Click to expand...
Click to collapse
It needs to be same version as you have already for ruu or newer, can't be older as you're s on
timbohobbs said:
It needs to be same version as you have already for ruu or newer, can't be older as you're s on
Click to expand...
Click to collapse
Oh my, i dl 1.90.401.5, and i need 1.95.401.4. i will try again.
If it works, can I go to flash twrp backup and stock recovery? Do i need a special version or is 1.80.401.3 ok (I dl it already followimg a Guide, my internet is really low).
I have: twrp 1.80.401.3
recovery 1.30.401.1 and recovery 1.90.401.5
if they are wrong, do i need twrp 1.95.401.4. and recovery 1.95.401.4?
timbohobbs said:
It needs to be same version as you have already for ruu or newer, can't be older as you're s on
Click to expand...
Click to collapse
Oh, i dl the old version. gonna dl the correct one now. it can be the same version as the one on the phone right?
Do i need to dl the same version of twrp backup and recovery too? or can i use older ones (I have twrp 1.80.401.5 and recovery 1.30.401.1 and recovery 1.90.401.4 because i followed a guide)
levibuko said:
Oh, i dl the old version. gonna dl the correct one now. it can be the same version as the one on the phone right?
Do i need to dl the same version of twrp backup and recovery too? or can i use older ones (I have twrp 1.80.401.5 and recovery 1.30.401.1 and recovery 1.90.401.4 because i followed a guide)
Click to expand...
Click to collapse
The ruu will give you stock recovery. With twrp, just flash the latest version after ruu
---------- Post added at 01:49 PM ---------- Previous post was at 01:47 PM ----------
levibuko said:
Oh, i dl the old version. gonna dl the correct one now. it can be the same version as the one on the phone right?
Do i need to dl the same version of twrp backup and recovery too? or can i use older ones (I have twrp 1.80.401.5 and recovery 1.30.401.1 and recovery 1.90.401.4 because i followed a guide)
Click to expand...
Click to collapse
Ruu will revert you to stock recovery. Then flash latest version of twrp if you want
---------- Post added at 02:17 PM ---------- Previous post was at 01:49 PM ----------
timbohobbs said:
The ruu will give you stock recovery. With twrp, just flash the latest version after ruu
---------- Post added at 01:49 PM ---------- Previous post was at 01:47 PM ----------
Ruu will revert you to stock recovery. Then flash latest version of twrp if you want
Click to expand...
Click to collapse
Let us know how it went [emoji106]
timbohobbs said:
The ruu will give you stock recovery. With twrp, just flash the latest version after ruu
---------- Post added at 01:49 PM ---------- Previous post was at 01:47 PM ----------
Ruu will revert you to stock recovery. Then flash latest version of twrp if you want
---------- Post added at 02:17 PM ---------- Previous post was at 01:49 PM ----------
Let us know how it went [emoji106]
Click to expand...
Click to collapse
It took me a while since my internet is slow
So, after dl the right version it worked. I had trouble with my drivers to get fastboot to work but it did in the end. I locked the bootloader after that because the video i followed said so after RUU (https://www.youtube.com/watch?v=pIX94bxx6VM).
Now i think i should have flashed TWRP first to get everything original right? With a locked bootloader it wont work or will it?
levibuko said:
It took me a while since my internet is slow
So, after dl the right version it worked. I had trouble with my drivers to get fastboot to work but it did in the end. I locked the bootloader after that because the video i followed said so after RUU (https://www.youtube.com/watch?v=pIX94bxx6VM).
Now i think i should have flashed TWRP first to get everything original right? With a locked bootloader it wont work or will it?
Click to expand...
Click to collapse
You don't need to lock. How can you flash twrp with locked bootloader ?
---------- Post added at 03:56 PM ---------- Previous post was at 03:52 PM ----------
You can still get ota with unlocked bootloader, only reason to lock it is for sale or repair
timbohobbs said:
The ruu will give you stock recovery. With twrp, just flash the latest version after ruu
---------- Post added at 01:49 PM ---------- Previous post was at 01:47 PM ----------
Ruu will revert you to stock recovery. Then flash latest version of twrp if you want
---------- Post added at 02:17 PM ---------- Previous post was at 01:49 PM ----------
Let us know how it went [emoji106]
Click to expand...
Click to collapse
timbohobbs said:
You don't need to lock. How can you flash twrp with locked bootloader ?
---------- Post added at 03:56 PM ---------- Previous post was at 03:52 PM ----------
You can still get ota with unlocked bootloader, only reason to lock it is for sale or repair
Click to expand...
Click to collapse
yeah, i need to send it in. i re unlocked and used my file but now my homebutton isnt working anymore :/ it worked before i flashed 2.41.403.1 even after RUU it worked.
also, when i go into my bootloader it still says that my software is modified. before i had stock it said official. should i have flashed original recovery and then lcoked the bootloader? :/
levibuko said:
yeah, i need to send it in. i re unlocked and used my file but now my homebutton isnt working anymore :/ it worked before i flashed 2.41.403.1 even after RUU it worked.
also, when i go into my bootloader it still says that my software is modified. before i had stock it said official. should i have flashed original recovery and then lcoked the bootloader? :/
Click to expand...
Click to collapse
Just do ruu. That will include stock recovery. Then lock bootloader. No need for twrp
timbohobbs said:
Just do ruu. That will include stock recovery. Then lock bootloader. No need for twrp
Click to expand...
Click to collapse
Alright, i will as soon as my dl is done
I want to thank you grom my whole heart for taking your time and helping me. I appreciate it much
levibuko said:
Alright, i will as soon as my dl is done
I want to thank you grom my whole heart for taking your time and helping me. I appreciate it much
Click to expand...
Click to collapse
No problem? You should have said first you wanted to send it in, would have saved you time
timbohobbs said:
No problem You should have said first you wanted to send it in, would have saved you time
Click to expand...
Click to collapse
yeah i shouldve been more clear
timbohobbs said:
Just do ruu. That will include stock recovery. Then lock bootloader. No need for twrp
Click to expand...
Click to collapse
You can't get "locked" status without S-Off. You can only get "relocked" status which will show that the bootloader was once unlocked.
---------- Post added at 05:33 PM ---------- Previous post was at 05:30 PM ----------
levibuko said:
yeah, i need to send it in. i re unlocked and used my file but now my homebutton isnt working anymore :/ it worked before i flashed 2.41.403.1 even after RUU it worked.
also, when i go into my bootloader it still says that my software is modified. before i had stock it said official. should i have flashed original recovery and then lcoked the bootloader? :/
Click to expand...
Click to collapse
If it works after an RUU then there is no need to send it for repairs. It's probably from the ROM you are running or some other software related issue.
xunholyx said:
You can't get "locked" status without S-Off. You can only get "relocked" status which will show that the bootloader was once unlocked.
---------- Post added at 05:33 PM ---------- Previous post was at 05:30 PM ----------
If it works after an RUU then there is no need to send it for repairs. It's probably from the ROM you are running or some other software related issue.
Click to expand...
Click to collapse
I'm aware of that, however that wasn't asked and I was expecting the next question to be about relocked status. Besides, even with s off and locked status ( which I have ) there is still a message on set up regarding the device being a test device anyway