Good Morning,
I flashed my device " GT-I9082 " with new custom rom ( I9082XXAMF7 FULL ODEX ) and every thing is OK .
After connecting to internet the device shows me a notification that there is " software update " .
My question is : can i make software update inspite of installation custom ROM ?
Thank you very much .
Bye.
moumou android said:
Good Morning,
I flashed my device " GT-I9082 " with new custom rom ( I9082XXAMF7 FULL ODEX ) and every thing is OK .
After connecting to internet the device shows me a notification that there is " software update " .
My question is : can i make software update inspite installation custom ROM ?
Thank you very much .
Bye.
Click to expand...
Click to collapse
You are using balli's rom so you have CWM installed. Do a backup in CWM. Then reboot and try to do this "software update". In case of unsuccessful update and your phone does not boot or have errors, you can always restore from the backup. Good luck!
bongski55 said:
You are using balli's rom so you have CWM installed. Do a backup in CWM. Then reboot and try to do this "software update". In case of unsuccessful update and your phone does not boot or have errors, you can always restore from the backup. Good luck!
Click to expand...
Click to collapse
Thank You my freind
bongski55 said:
You are using balli's rom so you have CWM installed. Do a backup in CWM. Then reboot and try to do this "software update". In case of unsuccessful update and your phone does not boot or have errors, you can always restore from the backup. Good luck!
Click to expand...
Click to collapse
I tried to do "Software update" as it poped up after custom ROM installation. But the circle keeps rotating and there is no result. Is it same for others? Can't we update this custom ROM?
mr_coimbatore said:
I tried to do "Software update" as it poped up after custom ROM installation. But the circle keeps rotating and there is no result. Is it same for others? Can't we update this custom ROM?
Click to expand...
Click to collapse
Most likely you cannot update custom rom...
Related
hey guys
i am not able to install custom rom .zip via CWM i don't get any error while installing, it shows "Installation complete" but later on its stuck at galaxy y logo
the other features like backup,format,etc are working fine and i am able to install .zips via stock recovery but cmw isn't working for me
PS
i was able to use cwm before to flash roms
using skins cwm
which rom were you flashing...
Sent from my GT-S5360 using Tapatalk 2
having this problem with all roms
btw
my cwm.zip size is 1.31mb
Try cwm by mad team
Do a data/cache wipe
Then again check... flashing the rom
Sent from my GT-S5360 using Tapatalk 2
dranzer006 said:
hey guys
i am not able to install custom rom .zip via CWM i don't get any error while installing, it shows "Installation complete" but later on its stuck at galaxy y logo
the other features like backup,format,etc are working fine and i am able to install .zips via stock recovery but cmw isn't working for me
PS
i was able to use cwm before to flash roms
using skins cwm
Click to expand...
Click to collapse
wipe data and cache before installing a rom... or if u hav already installed it then do a wipe data and cache... try installing something else
maybe my cwm is corrupted can anyone give me a link to the old zip ?
skin's cwm has been updated and it won't install
http://forum.xda-developers.com/showthread.php?t=1446796
and i wasn't able to find download link anywhere for madteam
http://forum.xda-developers.com/showthread.php?t=1467492
dranzer006 said:
maybe my cwm is corrupted can anyone give me a link to the old zip ?
skin's cwm has been updated and it won't install
http://forum.xda-developers.com/showthread.php?t=1446796
and i wasn't able to find download link anywhere for madteam
http://forum.xda-developers.com/showthread.php?t=1467492
Click to expand...
Click to collapse
what is your firmware sir?? maybe its about your firmware that the rom is compatible with so that it wont stuck on samsung logo or bootloop if you have that firmware like DXKL2 and DXLC1
Here you go CWM by madteam:
http://www.mediafire.com/?n3x18su3495fr8l
Also do remember to data wipe and cache wipe from both stock and CWM recoveries before installing any rom..If the ROM still doesnt flash ..use the stock rom package from dokys thread in android development and re-flash..that must fix the issue..
FuranshisuKurogawa said:
what is your firmware sir?? maybe its about your firmware that the rom is compatible with so that it wont stuck on samsung logo or bootloop if you have that firmware like DXKL2 and DXLC1
Click to expand...
Click to collapse
No firmware doesnt matter..All firmwares support all ROMS..but they may have some glitches like wifi issues etc..but atleast they will boot up
hitme987 said:
Here you go CWM by madteam:
http://www.mediafire.com/?n3x18su3495fr8l
Also do remember to data wipe and cache wipe from both stock and CWM recoveries before installing any rom..If the ROM still doesnt flash ..use the stock rom package from dokys thread in android development and re-flash..that must fix the issue..
No firmware doesnt matter..All firmwares support all ROMS..but they may have some glitches like wifi issues etc..but atleast they will boot up
Click to expand...
Click to collapse
maybe the custom rom files are corrupt he/she need to download it again....
using DDLC2 will try with madteam's cwm and report back
thanks
I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:
Improper recovery.
samelaryan said:
I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:
Click to expand...
Click to collapse
BAM1789 said:
Improper recovery.
Click to expand...
Click to collapse
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers
xBeerdroiDx said:
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers
Click to expand...
Click to collapse
I did that and it worked thank you :good:
samelaryan said:
I did that and it worked thank you :good:
Click to expand...
Click to collapse
thats what we're all here for, buddy
Status 7: installation aborted.
xBeerdroiDx said:
thats what we're all here for, buddy
Click to expand...
Click to collapse
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.
perceptorz said:
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.
Click to expand...
Click to collapse
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot
xBeerdroiDx said:
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot
Click to expand...
Click to collapse
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.
perceptorz said:
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.
Click to expand...
Click to collapse
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.
xBeerdroiDx said:
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.
Click to expand...
Click to collapse
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)
perceptorz said:
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)
Click to expand...
Click to collapse
I would take up this situation in the correct forum. The more we discuss your device issues the more likey you are to download the wrong file or use a procedure not designed for your device software.
If you came from stock, flashed a rom and are stuck at the samsung logo, boot into recovery, wipe data and cache. Reboot to see if that helped. If not, seek advice in the N7000 forum. Cheers
Thanks for the guidance.
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
tuktukscotty said:
Can anyone help.....
I have tried to flash a few custom roms but everytime I go to install it says installation aborted (BAD). I have downloaded the same rom a couple of times in case it was a bad download, but still get the same result. I flashed the leaked 4.3 via odin before trying to install custom roms, could this be the problem?. I am using philz recovery.
Anybody got any ideas what I'm doing wrong?.
Thanks in advance
Scotty
Click to expand...
Click to collapse
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
shhbz said:
go with a clean wipe,system included and flash the rom. make sure u verify the md5 of the rom downloaded and use latest philz version and make a backup of rom just to be safe before flashing anything, the latest philz support 4.3 flashing
Click to expand...
Click to collapse
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
tuktukscotty said:
I did a full wipe before trying to install. Cleared cache etc. The rom I really want to install is Dr Ketan's. I don't understand how/what you mean by checking the md5??
Click to expand...
Click to collapse
http://www.winmd5.com/ download this locate the downloaded rom file and it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom and verify to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
shhbz said:
http://www.winmd5.com/ download this locate the downloaded rom file and verify it will calculate the md5 and then go to the link from where u downloaded v3 ketan rom u will see md5 details there just paste at the bottom to see if it matches fine if not your file download is corrupt.
are u on latest philz recovery
Click to expand...
Click to collapse
I'm using philz touch 4.6.4
tuktukscotty said:
I'm using philz touch 4.6.4
Click to expand...
Click to collapse
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
shhbz said:
use this http://d-h.st/iII i
i hope u have n7100 international version as u wish to flash keten rom
after flashing latest philz make a backup of rom and flash http://d-h.st/fWr u lose everything from internal it will reboot back to recovery.
procced with v3 install and just wipe cache and dalvik before restart after flashing
Click to expand...
Click to collapse
I have a UK bought note 2
tuktukscotty said:
I have a UK bought note 2
Click to expand...
Click to collapse
yes that's fine if ur box says n7100 and below battery check
shhbz said:
yes that's fine if ur box says n7100 and below battery check
Click to expand...
Click to collapse
Yes defo says GT-N7100
tuktukscotty said:
Yes defo says GT-N7100
Click to expand...
Click to collapse
you are good to proceed with the link file
shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I have installed the later philz recovery. Just going to try and flash again
tuktukscotty said:
I have installed the later philz recovery. Just going to try and flash again
Click to expand...
Click to collapse
Nope!.
Still unable to install. It says:
-- Installing: /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/DrKetan_Custom_ROM_V3Hybrid.zip
(bad)
Installation aborted
press any key to continue.
What am I doing wrong????? This is really so frustrating. Have I done something when installing the leaked version of 4.3 which is now stopping anything working??. Anybody got any ideas???.
Someone out there must know what I'm doing wrong...........please help.
shhbz said:
you are good to proceed with the link file
Click to expand...
Click to collapse
I tried and tried and tried but couldn't get it to install. I then decied to reflash back to 4.1.2 stock via odin. Then tried to install Dr's again but still wouldn't work. I then flashed the leaked 4.3 via odin and repeated the Dr's install and it worked!!!!!!.
Thanks for the advice.
Scotty.
Hi, I have rooted my device and installed a custom recovery. But that's it, haven't installed any new ROM, and still have the stock one witch it came with.
Today I received an update message, so I downloaded the new update, and as it should be, it requested a reset.
After the reset, the device boot himself into the recovery, ans apparently refuses to boot into the new rom, or anywhere but the recovery.
I performed a full wipe, and did a system restore. And still it always boot into the recovery.
Its a "Team Win" recovery v2.6.3.2
Help please.
Vad88 said:
Hi, I have rooted my device and installed a custom recovery. But that's it, haven't installed any new ROM, and still have the stock one witch it came with.
Today I received an update message, so I downloaded the new update, and as it should be, it requested a reset.
After the reset, the device boot himself into the recovery, ans apparently refuses to boot into the new rom, or anywhere but the recovery.
I performed a full wipe, and did a system restore. And still it always boot into the recovery.
Its a "Team Win" recovery v2.6.3.2
Help please.
Click to expand...
Click to collapse
what is the version number of you pad?? like 12a, 12b, 18a, 20a, 20b...........etc
Which one of those???
Jhon998 said:
what is the version number of you pad?? like 12a, 12b, 18a, 20a, 20b...........etc
Which one of those???
Click to expand...
Click to collapse
I dont remember man...
I last time I rooted a device it was a Galaxy S2, and I cracked opened the **** out of him, and something like this never happened to me..
As I told, I did a system restore, why it still doesnt boot anywhere beyond the recovery?
One more thing,
After I manage to turn it off, it starts immediately as I plug in the power, but stops on the "Logo" and with this title in the up right corner: "Secure boot error! Cause: Device Unlock, so Boot Success"
Thats it... got this message and doesnt boot... After I unplug the power, it boots into recovery, and only then (whie unplug) I can order it to power off.
Iam desperate..
Ok, now I think I am truly Fckd up...
I accidentally deleted the only restore file I had... witch didn't quit helped me the one time I launched it.. but anyways, now even this one is gone.
So now I stuck with god know what system.. (I did launched the restore, bit it didnt helped).
I do have a working recovery, and thats it. Please help me restore the device to fully stoke.
Vad88 said:
Ok, now I think I am truly Fckd up...
I accidentally deleted the only restore file I had... witch didn't quit helped me the one time I launched it.. but anyways, now even this one is gone.
So now I stuck with god know what system.. (I did launched the restore, bit it didnt helped).
I do have a working recovery, and thats it. Please help me restore the device to fully stoke.
Click to expand...
Click to collapse
Download a ROM onto sdcard through computer, transfer sdcard to tablet, install through recovery.
sleekmason said:
Download a ROM onto sdcard through computer, transfer sdcard to tablet, install through recovery.
Click to expand...
Click to collapse
Thanks, Iam downloading the one from this thread: (ROM) OFFICIAL 4.4.2 V500 Update & Go back to 4.2.2!
Is it possible to install it into the tablet in mine condition?
Vad88 said:
Thanks, Iam downloading the one from this thread: (ROM) OFFICIAL 4.4.2 V500 Update & Go back to 4.2.2!
Is it possible to install it into the tablet in mine condition?
Click to expand...
Click to collapse
Not sure. I was thinking Mahdi or Cyanogenmod. A complete ROM. If the 4.4.2 is a complete ROM, then yes. The update you are trying won't affect the recovery, correct?
sleekmason said:
Not sure. I was thinking Mahdi or Cyanogenmod. A complete ROM. If the 4.4.2 is a complete ROM, then yes. The update you are trying won't affect the recovery, correct?
Click to expand...
Click to collapse
Yes.. the update didnt effected the recovery, and from my experience it shouldnt... (the update is for the ROM, witch was stock)
Thats why I didnt install a custom ROM from the beginning, I wanted a rooted device, but for now I wanted to stay with stock ROM. After receiving an update message, I didnt think for a second that the root and the custom recovery will effect the update...
Maybe this update had something to do with the recovery... and because mine is custom, I have this issue...
Iam not an expert in the LG field, so Iam not familiar with those effects, the update caused...
Can you please look at the installation guide in the link I gave, and check if it is doable on my device.
Thank you for the help! :good:
I would like to update that I followed the instructions from this link: (ROM) OFFICIAL 4.4.2 V500 Update & Go back to 4.2.2!, and now the tablet is back alive!
Thanks for all the help!
Vad88 said:
I would like to update that I followed the instructions from this link: (ROM) OFFICIAL 4.4.2 V500 Update & Go back to 4.2.2!, and now the tablet is back alive!
Thanks for all the help!
Click to expand...
Click to collapse
Good!
Please update the post title and add "Solved".
So, i had the stock Huawei JB 4.2.2 ROM. I wanted that : http://forum.xda-developers.com/showthread.php?t=2735940
I did as said.
Downloaded the ROM
Wiped everything it says
Installed the ROM
Now i get the Huawei Ascend flash screen in the beginning and that's it! I tried to flash stock ROM again, but it says that Install aborted.
I just got that phone and would really appreciate your help !
Lendorav said:
So, i had the stock Huawei JB 4.2.2 ROM. I wanted that : http://forum.xda-developers.com/showthread.php?t=2735940
I did as said.
Downloaded the ROM
Wiped everything it says
Installed the ROM
Now i get the Huawei Ascend flash screen in the beginning and that's it! I tried to flash stock ROM again, but it says that Install aborted.
I just got that phone and would really appreciate your help !
Click to expand...
Click to collapse
Hi!
Please , put stock recovery back to be able to flash stock rom !
Now just remove the memory card, and go to stock recovery by pressing combo key . Here you must wipe cache ! Put your memory sdcard back ( make sure you already have /dlaod/UPDATE.APP into it) , and reboot again into recovery ! Installation will begin automatically .... ( your device must not be connected with USB cable )
Good luck .
Lendorav said:
So, i had the stock Huawei JB 4.2.2 ROM. I wanted that : http://forum.xda-developers.com/showthread.php?t=2735940
I did as said.
Downloaded the ROM
Wiped everything it says
Installed the ROM
Now i get the Huawei Ascend flash screen in the beginning and that's it! I tried to flash stock ROM again, but it says that Install aborted.
I just got that phone and would really appreciate your help !
Click to expand...
Click to collapse
Most important step many people miss:
Any time you are going to flash new ROM you should make backup with TWRP, since you already have TWRP installed. That way if flash fails you can simply restore your previous ROM without any hassle.
I am surprised that you flash failed if you followed instructions and wiped everything except internal and external storage.