Develop Bugs

[Q] Status 7 Error?

I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:

Improper recovery.

samelaryan said:
I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:
Click to expand...
Click to collapse
BAM1789 said:
Improper recovery.
Click to expand...
Click to collapse
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers

xBeerdroiDx said:
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers
Click to expand...
Click to collapse
I did that and it worked thank you :good:

samelaryan said:
I did that and it worked thank you :good:
Click to expand...
Click to collapse
thats what we're all here for, buddy

Status 7: installation aborted.
xBeerdroiDx said:
thats what we're all here for, buddy
Click to expand...
Click to collapse
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.

perceptorz said:
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.
Click to expand...
Click to collapse
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot

xBeerdroiDx said:
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot
Click to expand...
Click to collapse
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.

perceptorz said:
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.
Click to expand...
Click to collapse
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.

xBeerdroiDx said:
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.
Click to expand...
Click to collapse
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)

perceptorz said:
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)
Click to expand...
Click to collapse
I would take up this situation in the correct forum. The more we discuss your device issues the more likey you are to download the wrong file or use a procedure not designed for your device software.
If you came from stock, flashed a rom and are stuck at the samsung logo, boot into recovery, wipe data and cache. Reboot to see if that helped. If not, seek advice in the N7000 forum. Cheers

Thanks for the guidance.

[Guidance] SGH-T989 UPDATING ISSUE!

Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.

Did you follow the instructions to flash TWRP using Odin?

olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear

bump

Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1

aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?

N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.

N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.

markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post

aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!

N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.

Help- stuck on TWRP after cm14 update

***SOLVED***
Hello, I had cm14 installed and I was trying to update it. after the update, the device always boots to recovery(TWRP).
I tried the full wipe and flash again the rom, again boot to recovery. what is the solution for it?

lsdream said:
Hello, I had cm14 installed and I was trying to update it. after the update, the device always boots to recovery(TWRP).
I tried the full wipe and flash again the rom, again boot to recovery. what is the solution for it?
Click to expand...
Click to collapse
what version of twrp are you running? do you have a nandroid backup that you could restore? sometimes the partitions can get messed up during an update. if nothing helps, just follow this unbrick guide which will revert your phone completely back to stock, with all the storage partitions intact.

3.0.2-1

lsdream said:
3.0.2-1
Click to expand...
Click to collapse
yeah, everyone's got that one, but there are many versions of it usually a number, like 3.0.2-1 (22) for example, and each one build for specific cases. except you got it from the official twrp web, then there shouldn't really be problems with cm14.1
what about nandroid? can you restore one?

do you have any idea how to boot it?

lsdream said:
do you have any idea how to boot it?
Click to expand...
Click to collapse
please use the quote function so i get a notification when you reply.
i do, right in my first post here is a link to an unbrick guide which will help you because clearly something in your phone's storage is messed up. just follow it and you'll be back at stock with a fully functional phone

bombaglad said:
please use the quote function so i get a notification when you reply.
i do, right in my first post here is a link to an unbrick guide which will help you because clearly something in your phone's storage is messed up. just follow it and you'll be back at stock with a fully functional phone
Click to expand...
Click to collapse
Thanks, I just flash the stock rom and it boot normally.

lsdream said:
Hello, I had cm14 installed and I was trying to update it. after the update, the device always boots to recovery(TWRP).
I tried the full wipe and flash again the rom, again boot to recovery. what is the solution for it?
Click to expand...
Click to collapse
I had the same situation. You get out of this by fastboot flashing cm recovery, booting to it, then flash twrp back in fastboot. I think the ota doesnt fully work with twrp.

Flash the modified twrp from the second post in this forum
http://forum.xda-developers.com/oneplus-3/how-to/rom-community-build-3-5-5-t3490939

OnePlus 3 keeps booting into TWRP Recovery Mode - PLEASE HELP!!

I will try to explain what happened as best as possible.
I wanted to install the AKT Profile on my un-rooted one plus 3 and so I decided to root it.'
I looked up on google and used the OP3 All In One ToolKit to unlock bootloader and flash TWRP.
Then I booted up phone to download SuperSu in order to flash it.
This is where the problem began. I went into TWRP recovery mode and it asked for a password and that stopped the nandroid backup too. but I googled and found out that doing a Wipe helps you bypass the password bug, so I did that. Now I went ahead and did a nandroid backup.
This is where I don't understand what's going on. How much ever I try to reboot the device, it ONLY loads me back into TWRP Recovery screen.
I even tried to restore the backup, it completes the restore but I dont see any reboot option right after it is done, So i have to long press power button to reload back into TWRP.
Now I'm confused as to what to do and would REALLY appreciate help, ASAP.
P.S - I'm a noob so I probably wont understand high level jargon
thank you guys in advance :crying:
SOLVED : I flashed TWRP 3.0.3 once again and somehow it got fixed

'' doing a wipe help you bypass the password''... Well yes probably, but depending on what type of wipe, you might have wiped your rom/system. So if that is the case, there is no rom to boot into, and your stuck in twrp recovery. Restoring an empty Nandroid wont do anything either. So my guess is you will have to download stock or custom rom and do a fresh install.

If needed, this method works very well.
I used it to day, with success.
Good luck !

Thank you. but will this work with latest TWRP 3.0.3 or will i have to use old one as mentioned in that post?

Use latest twrp 3.0.4.0. Also for clean install with OOS 4.02 or OB11. Also keep both firmware and supersu/magisk superuser close by. You can find all dl-links on xda.

rshah0429 said:
I will try to explain what happened as best as possible.
I wanted to install the AKT Profile on my un-rooted one plus 3 and so I decided to root it.'
I looked up on google and used the OP3 All In One ToolKit to unlock bootloader and flash TWRP.
Then I booted up phone to download SuperSu in order to flash it.
This is where the problem began. I went into TWRP recovery mode and it asked for a password and that stopped the nandroid backup too. but I googled and found out that doing a Wipe helps you bypass the password bug, so I did that. Now I went ahead and did a nandroid backup.
This is where I don't understand what's going on. How much ever I try to reboot the device, it ONLY loads me back into TWRP Recovery screen.
I even tried to restore the backup, it completes the restore but I dont see any reboot option right after it is done, So i have to long press power button to reload back into TWRP.
Now I'm confused as to what to do and would REALLY appreciate help, ASAP.
P.S - I'm a noob so I probably wont understand high level jargon
thank you guys in advance :crying:
Click to expand...
Click to collapse
Had the same problem and panicked like hell. I just switched a few twrp recoveries (modded and official) and found one that worked and phone booted.

Seagorilla2 said:
Use latest twrp 3.0.4.0. Also for clean install with OOS 4.02 or OB11. Also keep both firmware and supersu/magisk superuser close by. You can find all dl-links on xda.
Click to expand...
Click to collapse
thank you. i will try this

Seagorilla2 said:
Use latest twrp 3.0.4.0. Also for clean install with OOS 4.02 or OB11. Also keep both firmware and supersu/magisk superuser close by. You can find all dl-links on xda.
Click to expand...
Click to collapse
I can't find TWRP 3.0.4.0 Can you please link it?

rshah0429 said:
I can't find TWRP 3.0.4.0 Can you please link it?
Click to expand...
Click to collapse
See Here

https://build.nethunter.com/twrp/oneplus/twrp-3.0.4-0-oneplus3.img
Its not official but working for me...

Try flashing the stock recovery. I got stuck in recovery loop after the OTA update got installed over twrp. Flashed the stock recovery and right away it booted me to the rom.

It's a problem of older twrp with nougat so you need to flash twrp new version

Moto G5 automatically boots into TWRP

Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?

I have the same problem, it comes back to recovery all the time and we can tell you about it, some help please
---------- Post added at 09:59 PM ---------- Previous post was at 09:43 PM ----------
Hi, I've come back, hahaha, I installed resurrection remix 7.1, previous all the wipes and reboot in bootloader I gave start and started, great.

I had this problem trying to install the rom ViperOS. I solved it with one of these steps:
- Boot into Fastboot, select "Start" with volume Keys.
- Flash "boot.img" directly from the zip that is ROM, do this using a PC.
- If you're using stock rom, reflash boot.img
Greetings

CypherPotato said:
I had this problem trying to install the rom ViperOS. I solved it with one of these steps:
- Boot into Fastboot, select "Start" with volume Keys.
- Flash "boot.img" directly from the zip that is ROM, do this using a PC.
- If you're using stock rom, reflash boot.img
Greetings
Click to expand...
Click to collapse
Does not work for me.
I have flash boot.ini Atomic-OS-1.5 and OCT-N-WEEKLY ...
My phone boot always in recovery
regards
Sry for my bad english.

SuperUtilisateur said:
Does not work for me.
I have flash boot.ini Atomic-OS-1.5 and OCT-N-WEEKLY ...
My phone boot always in recovery
regards
Sry for my bad english.
Click to expand...
Click to collapse
Have you tried to boot from Fastboot?

Yes, it works once...
But if I have to restart it (or turn off and start with the power button), the phone boot always in recovery.
It is then necessary to restart fastboot then press "start".

Haxorkat said:
Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?
Click to expand...
Click to collapse
Try do a full reset through fastboot and then try installing whatever you need through fastboot and recovery. Much more reliable han ota installs/updates

Haxorkat said:
Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?
Click to expand...
Click to collapse
install resurrection remix and lock with the update of the security patch as we know, then install via fastboot the original firmware, after rebooting install resurrection and now bootea normalmally greetings

grosobart said:
install resurrection remix and lock with the update of the security patch as we know, then install via fastboot the original firmware, after rebooting install resurrection and now bootea normalmally greetings
Click to expand...
Click to collapse
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--

SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
It always says that
As long as it says at the end
Write OK
It flashed successfully

OK,
After flash,
boots automatically into recovery ...
--
I tried with various boot.img. (linéage, AOSP, OctOS, ... )
Does not work ..
I started (into fastboot), I was errors. (Process stopped)
I just restored my phone ( https://mirrors.lolinet.com/firmware/moto/cedric/official/RETAIL/ )
... boot correctly.
Never mind ...
thank you all

SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
https://forum.xda-developers.com/g5/how-to/fyi-recovered-g5-xt-1676-to-stock-t3626088
try this first, regards

SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
you should flash the correct firmware on your device and it should work, I did it several times and it works perfect

Moto G5 boots to TWRP
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??

Noel Carson said:
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??
Click to expand...
Click to collapse
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup

rajibahmed said:
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup
Click to expand...
Click to collapse
Backing up Gigs of data is a huge pain. Even if I have to copy to my pc. So, just something that's less cumbersome.

Noel Carson said:
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??
Click to expand...
Click to collapse
rajibahmed said:
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup
Click to expand...
Click to collapse
Read the faq section (2nd post) - answer is there
https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737

grosobart said:
you should flash the correct firmware on your device and it should work, I did it several times and it works perfect
Click to expand...
Click to collapse
Anyone get the stock for 16gb/2gb version?