Develop Bugs

TWRP bootloops

I've seen this problem mentioned in a few threads but not seen any definitive fix.
My current install :
Stock NPD35K system, vendor, bootloader
Xceede's v8.01 kernel
TWRP 3.02 v6.0
Encrypted data partition
I currently get bootloops every time I boot into TWRP. After using TWRP and attempting to reboot it will then bootloop into recovery refusing to boot the system.
I have found it can be fixed by rebooting into fastboot and the "fastboot reboot" command. But this is frustrating if I don't have a laptop handy.
This happens every time I need to boot into recovery to install or update via TWRP. Is anyone else getting the same bootloops and has anyone found a permanent fix?
Thanks guys.
Sent from my Nexus 6P using Tapatalk

Hi Jake,
I had exactly the same issue since NPD35K except the fastboot reboot solution did not work for me.
What i could find was that if you flash the default vendor, recovery and cache partition via fastboot and then put off the tablet, it should after all of this boot correctly to the system.
Cheers,
Mathieu

You are not alone ..
I had the recovery bootloop once myself.
I did the "fastboot reboot" command and since then the Pixel C is booting fine again.
Did several installations afterwards .. no problems anymore.
Just once ..
But if you get it every reboot this a real problem.
Right now I am not able to help you .. just don't know the root cause and how to fix it.
As it looks like, it helps if you go back to stock recovery, like mentioned above.
I can not confirm this .. as I don't have the problem.
Good luck !

Thanks for the advice guys.
As I said it only bootloops immediately after boating into TWRP (even if I don't install anything), if I reboot from system it's fine.
At the moment I prefer to keep TWRP installed and reboot from fastboot if I need to use TWRP. I don't see an advantage to installing the stock recovery. It would be great to pinpoint what's causing this though.
Sent from my Pixel C using Tapatalk

I'm still getting this TWRP bootloop. I've tried several versions - 3.0.0, 3.0.21, 3.0.23. I've tried numerous times re-flashing stock using NRT and then flashing the recovery again. I've also tried fastboot-reboot.
I'm on stock 7.1.1 - NMF26H. If i need to install a different version for this to work I can do that.
Is there perhaps some particular version of TWRP that everyone but me is using? Or are there some specific versions of other files that I also need to flash along with TWRP? From what I've read if I get past this once that's probably it.
Thanks

badwiring said:
I'm still getting this TWRP bootloop. I've tried several versions - 3.0.0, 3.0.21, 3.0.23. I've tried numerous times re-flashing stock using NRT and then flashing the recovery again. I've also tried fastboot-reboot.
I'm on stock 7.1.1 - NMF26H. If i need to install a different version for this to work I can do that.
Is there perhaps some particular version of TWRP that everyone but me is using? Or are there some specific versions of other files that I also need to flash along with TWRP? From what I've read if I get past this once that's probably it.
Thanks
Click to expand...
Click to collapse
Pls install latest bootloader and latest factory image via fastboot, manually.
Pls use latest fastboot binaries from Google.
Pls install 3.0.2-23 via fastboot as well.
Reboot directly into TWRP and not into system in between.
Install SuperSu.zip v2.79 in TWRP.
Reboot into system.
The first time the system will boot twice .. it's normal.

followmsi said:
Pls install latest bootloader and latest factory image via fastboot, manually.
Pls use latest fastboot binaries from Google.
Pls install 3.0.2-23 via fastboot as well..
Click to expand...
Click to collapse
Thank you. I'll try this today. If I use s tool like NRT to flash "stock" to the device, does that cover what's described in the first step - latest bootloader and latest factory image - or is there something else I need to flash at that step?
Thanks

badwiring said:
Thank you. I'll try this today. If I use s tool like NRT to flash "stock" to the device, does that cover what's described in the first step - latest bootloader and latest factory image - or is there something else I need to flash at that step?
Thanks
Click to expand...
Click to collapse
Maybe your problem is related to the tool itself
For this reason I recommend to use the official google fastboot tool for complete flashing of factory image including bootloader.
To have a proper base to continue ..
Good luck !
EDIT: .. no need to wipe data here. Just a fresh system, vendor, cache and boot image from factory image.

followmsi said:
Maybe your problem is related to the tool itself
For this reason I recommend to use the official google fastboot tool for complete flashing of factory image including bootloader.
To have a proper base to continue ..
Good luck !
Click to expand...
Click to collapse
I think that answers my question - the original factory image including the bootloader.
I'll try it in a few hours. Thank you very much!

That worked! I was currently on stock 7.1.1 so I tried it first without re-flashing, although I was prepared to go back to that step if it didn't work.
First I downloaded SuperSU 2.79 and copied the ZIP to my device.
I used Minimal ADB and Fastboot (which I think is taken from the official Google source) and flashed recovery-twrp-3.0.2.23.followmsi-ryu.img.
Then I rebooted into recovery - not system - and flashed SuperSU.
Finally I rebooted into system.
The Google logo appeared for a moment and then it booted again (exactly as you said.) Then it booted normally.
Finally! Thank you very much! Hopefully this will help someone else too. It can be the smallest detail we miss that makes the difference.

badwiring said:
That worked! I was currently on stock 7.1.1 so I tried it first without re-flashing, although I was prepared to go back to that step if it didn't work.
First I downloaded SuperSU 2.79 and copied the ZIP to my device.
I used Minimal ADB and Fastboot (which I think is taken from the official Google source) and flashed recovery-twrp-3.0.2.23.followmsi-ryu.img.
Then I rebooted into recovery - not system - and flashed SuperSU.
Finally I rebooted into system.
The Google logo appeared for a moment and then it booted again (exactly as you said.) Then it booted normally.
Finally! Thank you very much! Hopefully this will help someone else too. It can be the smallest detail we miss that makes the difference.
Click to expand...
Click to collapse
You are welcome ..

``

tried numerous times to flash TWRP to my Pixel C 8.0.0 (OPR1.170623.032, Nov 2017) every time with bootloop in to recovery...
most recently hoping twrp-3.2.0-0-dragon would work
---------- Post added at 07:44 PM ---------- Previous post was at 07:29 PM ----------
tried to reflash ryu-opr1.170623.032-factory-020f1cf9's boot.img and it still bootlooped.
Tried to flash the recovery and now its bootlooping into stock recovery. Any ideas?
for a stock google device, this things a nightmare to work with compared to my nexus devices

Can't boot into recovery after cm14.1 nightly official

So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers

Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get

JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?

JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk

I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.

Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.

Thanks a lot guys, that did the trick, and done with flashify

JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk

Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.

Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!

HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.

GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...

m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time

http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me

JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me

This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!

gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..

After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.

Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse

Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life

Help on bootloop Moto G5

Hi guys I got bootloop in my moto g5. First I got "failed to mount /data", now the phone boots in unlocked warning screen then says "erasing" then reboots and start over again.
Before the procedure my actions was:
- I got OTA update
- inserted a microSD
- unlocked bootloader
- boot on TWRP 3.1.0
- backup to microSD
-install TWRP
as shown by bootloader screen, my model is "cedric XT1672 32GB P5", M8937_8000.122.02.45R CEDRIC_BRAZILDSDS_CUST.
What I don't understand is why TWRP don't restore, as a made a backup before the procedure.
I appreciate if somebody could help me out!

I had the same problem. Wiping /data corrupted my partition table or system partition.
You need to flash the system and / or the partition table via fastboot from the extracted stock rom (see the other thread arround here, make sure you use the right link (cedric, not the potter one)
-> boot to fastboot
fastboot flash system system.sparsechunk.0
fastboot flash system system.sparsechunk.1
...
It should boot normally afterwards, but probably twrp is gone / twrp has no access to your /data again. See the twrp thread, i'm facing the same issue. But at least the phone works again - without root
Greetings,
Chris

-> boot to fastboot
fastboot flash system system.sparsechunk.0
fastboot flash system system.sparsechunk.1
Click to expand...
Click to collapse
Did not work for me!

I hope you flashed all the system files?
Otherwise try to flash the full stock rom via fastboot. There are tons of guides explaining

Help NPP25.137-33 It doesn't work filefactory
.sirhc said:
I hope you flashed all the system files?
Otherwise try to flash the full stock rom via fastboot. There are tons of guides explaining
Click to expand...
Click to collapse
Help with stock NPP25.137-33 someone who has it in google driver to download

Got it back I, like you said! The first time I think I got any of those system file corrupted!!
I just dont know until when it gonna be good cos I am going to root this s.. now!
thks

linsspinho said:
Got it back I, like you said! The first time I think I got any of those system file corrupted!!
I just dont know until when it gonna be good cos I am going to root this s.. now!
thks
Click to expand...
Click to collapse
// already found how to root. won't do it right now as there are no success stories

custom roms do not boot up

hi there,
i used crDroidAndroid-8.1-20180606-riva-v4.3 but there were color problems i didnt know 2 fix so i decided 2 flash a new rom resp. a newer version but no custom rom boots up.
when it tries 2 boot is freezes at the boot screen, then screen switches off and nothing happens. i can go 2 fastboot and recovery.
sometimes it boots up but after a few seconds it freezes 2.
i tried different roms and recoveries but nothing works.
i foolishly wiped internal storage once but then i flashed the stock rom again which boots up. then i unlocked the bootloader and flashed a custom recovery and a rom again but the same error is there (no booting up)
anyone got a solution for this problem? no unbricking suggestions plz
edit: im in the wrong thread i think. i wanted 2 post it in "Guides, News, & Discussion". cant delete it. sry for that

logs
so i managed 2 create logs while booting up.
1) https://pastebin.com/cgrX2DA1
2) https://pastebin.com/r7DmcN46
3) https://pastebin.com/0pwXyuys
4) https://pastebin.com/S41FG2SQ
1) is 1st part of the log while booting with no success to boot into the os.
2) is 2nd part of the log while booting with no success to boot into the os.
3) is 1st part of the log while booting with successful boot into the os.
4) is 2nd part of the log while booting with successful boot into the os.
i also tried 2 log "cat /proc/last_kmsg > /sdcard/last_kernel_message_log.txt"
and "dmesg > /sdcard/kernel_boot_log.txt" via terminal in linux but it only sais file or directory not found.
i hope sum1 can give me sum help now.

so i did this https://en.miui.com/thread-3921604-1-1.html but it doesnt help. as i expected.
any1? i can post more information if necessary. just say which and perhaps how ;D

cmon guys. i can impossibly b the only 1 who faces this problem.
i dont think its a hardware thing cause stock rom and android 7.1.2 (viper os) work. maybe a vendor problem? could flash another vendor img solve this problem? can sum1 send me his?
i got sum more logs after flashing rr 7.0:
logcat 1st part: https://pastebin.com/EBZAgbhF
logcat 2nd part: https://pastebin.com/qaMFrvxi
dmesg: https://pastebin.com/Gg8bYkJy
cheers

Fastboot flash latest miui 10 stable using mi flash tool and use the rom after setting up. Then flash custom recovery and do a full wipe.
This works for most cases.

NaAnBcEhEuL9A8K7 said:
Fastboot flash latest miui 10 stable using mi flash tool and use the rom after setting up. Then flash custom recovery and do a full wipe.
This works for most cases.
Click to expand...
Click to collapse
thx for ur answer but i tried this already. does not work on android 8 and 9 roms

daemonicvs said:
thx for ur answer but i tried this already. does not work on android 8 and 9 roms
Click to expand...
Click to collapse
Well it worked for me.
Which custom rom you want to use?

well, it doesnt matter 2 me. the main thing is that it works =D rr, aex, crdroid..

daemonicvs said:
well, it doesnt matter 2 me. the main thing is that it works =D rr, aex, crdroid..
Click to expand...
Click to collapse
Crdroid is my choice because aex and rr are very early builds. I like pixel experience but the devs not updating it so crdroid or havoc os.
Like i said use Xiaomi flash tool and flash miui 10 stable via fastboot method(there are 3 options in the bottom select flash all instead of flash and lock to avoid unlocking the bootloader again), don't flash anything else, setup and use the phone, flash recovery wipe all and format, install rom, don't flash gapps yet, boot into rom and see if its fixed.
Use vendor based recovery, if using batik recovery you have to flash batik recovery again after format.
This is my solution.

NaAnBcEhEuL9A8K7 said:
Crdroid is my choice because aex and rr are very early builds. I like pixel experience but the devs not updating it so crdroid or havoc os.
Like i said use Xiaomi flash tool and flash miui 10 stable via fastboot method(there are 3 options in the bottom select flash all instead of flash and lock to avoid unlocking the bootloader again), don't flash anything else, setup and use the phone, flash recovery wipe all and format, install rom, don't flash gapps yet, boot into rom and see if its fixed.
Use vendor based recovery, if using batik recovery you have to flash batik recovery again after format.
This is my solution.
Click to expand...
Click to collapse
i did it several times before but 2 b safe i did it again like that:
i flashed riva_global_images_V10.1.1.0.NCKMIFI_20181029.0000.00_7.1_global_f444c158ed.tgz using XIAOMI-TOOL-MiFlash-for-Linux-by-IceMan-master. im on linux mint 18.3. i have 4 options:
flash_all_lock.sh
flash_all_lock_crc.sh
flash_all_except_data_storage.sh
flash_all.sh
i chose flash_all.sh
i booted into the stock rom and set it up, enabled dev options and adb.
then i switched it off, went into bootloader, flashed twrp-3.2.3-0-riva.img via fastboot.
after that i entered twrp, flashed OrangeFox-R8.3-riva.zip and rebooted into recovery
i wiped everything except external sd and usb otg (i dont have these)
after a reboot intorecovery i formatted data then rebooted in recovery
i flahed crDroidAndroid-9.0-20181002-riva-v5.0.zip
then reboot into system
no success as i expected! wtf is wrong wtf. this cant b true!
but thank u very much for ur efforts! perhaps i would try 2 restore a vendor img from sum1 which rom does work. i know its a great demand but could u send me urs? ;D i dont know if there r sum personal info..
best regards

Don't give up there might be a solution.
Pray to God for some help.
:good:
---------- Post added at 01:23 PM ---------- Previous post was at 12:59 PM ----------
Currently I am using Xiaomi.eu beta rom. You can check their website for all the features. Its smooth, stable and can update without needing to got the recovery:victory:
This should work for you because unlike other roms this is based on miui for riva. That means you will get updates till Xiaomi ditches support for riva.
I recommend you use this rom over the global rom until you fix the problem with your phone.
Some things missing:
Choice of region is limited( India is not available)
There is no custom kernel available for miui oreo as of now.
Magisk safetynet not passed
If you're going flash this rom you need to be on latest global beta fastboot rom and need a recovery that supports oreo base.
I use batik recovery base oreo.

yes. i cant b the only 1 facing this problem...!? really. i cant!
thx anyway

daemonicvs said:
yes. i cant b the only 1 facing this problem...!? really. i cant!
thx anyway
Click to expand...
Click to collapse
Maybe you can be the only one facing this problem.
Try joing telegram community maybe your problem will get fixed from there.

NaAnBcEhEuL9A8K7 said:
Maybe you can be the only one facing this problem.
Try joing telegram community maybe your problem will get fixed from there.
Click to expand...
Click to collapse
theres no difference between my device and yours... everybody must have this problem ;/

daemonicvs said:
theres no difference between my device and yours... everybody must have this problem ;/
Click to expand...
Click to collapse
Did you try edl method?

NaAnBcEhEuL9A8K7 said:
Did you try edl method?
Click to expand...
Click to collapse
yes. i could flash the stock rom this way but the problem is not solved this way

daemonicvs said:
yes. i could flash the stock rom this way but the problem is not solved this way
Click to expand...
Click to collapse
At least you have to try.

I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.

Eddyb299 said:
I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.
Click to expand...
Click to collapse
Did you flash lazy flasher?

Eddyb299 said:
I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.
Click to expand...
Click to collapse
dont u have 2 wait 2 weeks or so till bootloader is unlocked?
what exactly do u mean with won't boot up? bootloop? or stuck at boot logo?
after flashing a custom recovery, did u boot directly into the system or did u try 2 boot into recovery? sometimes the stock recovery overwrites the custom 1 when stock rom boots up
my problem is solved. i remembered that i made a full nandroid backup with twrp before i flashed a new rom and the problem appeared. so i restored everything i backed up with twrp (incl cust) and voila, rom booted up. and i can wipe system and data and flash every rom i wanna and it still boots up \o/
i really could have tried it earlier but i didnt think of this untill yesterday ;D
well, thx for ur efforts anyway buddy @NaAnBcEhEuL9A8K7
cheers

[LineageOS 19.1] Reboots to fastboot despite successful install

Hey
couldn't find anything related to my situation so I decided to ask. Here it goes:
After having to wait an entire week to unlock the bootloader (really??) its finally unlocked and I decided to install LineageOS.
Got a Mi10T Lite, gauguin, M2007J17G. It managed to snuck in an update to something like August 2020 security level at some point but after unlocking it got reset, so I suppose it had Android 10 and MIUI 12(?).
Simple enough, have done that countless times before.
- Flashed recovery, format data/factory reset as explained in wiki
- adb sideloaded ROM (nightly builds 20220822 and 20220815) - both succeeded
After rebooting the devices enters the bootloader again.
The wiki never mentions behaviour like this and I couldn't find anything online.
Do I need to flash latest MIUI ROM again?
Any ideas what went wrong and how to solve this issue?
I unzipped the ROM and fastboot boot boot.img which just resulted in a reboot to fastboot again.
Any idea or, preferrably, a solution would be most welcome
Thanks in advance.

woelkchen said:
Hey
couldn't find anything related to my situation so I decided to ask. Here it goes:
After having to wait an entire week to unlock the bootloader (really??) its finally unlocked and I decided to install LineageOS.
Got a Mi10T Lite, gauguin, M2007J17G. It managed to snuck in an update to something like August 2020 security level at some point but after unlocking it got reset, so I suppose it had Android 10 and MIUI 12(?).
Simple enough, have done that countless times before.
- Flashed recovery, format data/factory reset as explained in wiki
- adb sideloaded ROM (nightly builds 20220822 and 20220815) - both succeeded
After rebooting the devices enters the bootloader again.
The wiki never mentions behaviour like this and I couldn't find anything online.
Do I need to flash latest MIUI ROM again?
Any ideas what went wrong and how to solve this issue?
I unzipped the ROM and fastboot boot boot.img which just resulted in a reboot to fastboot again.
Any idea or, preferrably, a solution would be most welcome
Thanks in advance.
Click to expand...
Click to collapse
Try to flash the last firmware or rom
V13.0.4.0.SJSMIXM
https://xiaomifirmwareupdater.com/firmware/gauguin/
https://xiaomirom.com/en/rom/mi-10t-lite-gauguin-global-fastboot-recovery-rom/
TWRP
https://androidfilehost.com/?w=files&flid=318225

Thx. Went ahead and did that which ofc solved the issue. Thx a lot

Hi, I have same issue. I installed lineage 19.1 2022-09-26 on Mi 10T lite, actually last nightly, and after succesfull installation, after reboot lineage doesnt start and i have just fastboot mode. I have lineage recovery installed, and if i try to install recovery-rom, i dont feel comfortable on installing fastboot-rom, i get error, just after 47% i get unknown signature and it ask if i want continue, if i choose yes continue, on device it says it cant downgrade so its stopped. I also deleted cache but it didnt help, im not very happy to format system partition, im worried to brick it. Should i format system partition? And how deal with missing signature when i try to push stock rom? should i allow it?

BolognaTown said:
Hi, I have same issue. I installed lineage 19.1 2022-09-26 on Mi 10T lite, actually last nightly, and after succesfull installation, after reboot lineage doesnt start and i have just fastboot mode. I have lineage recovery installed, and if i try to install recovery-rom, i dont feel comfortable on installing fastboot-rom, i get error, just after 47% i get unknown signature and it ask if i want continue, if i choose yes continue, on device it says it cant downgrade so its stopped. I also deleted cache but it didnt help, im not very happy to format system partition, im worried to brick it. Should i format system partition? And how deal with missing signature when i try to push stock rom? should i allow it?
Click to expand...
Click to collapse
Cant use LOS recovery for stock rom.
go back to Miui
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/

NOSS8 said:
Cant use LOS recovery for stock rom.
go back to Miui
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
Click to expand...
Click to collapse
i didnt understand completely, should i find stock recovery and 'fastboot flash recovery stock-recovery.img'
or just using miflashtool without adding any stock recovery?

BolognaTown said:
i didnt understand completely, should i find stock recovery and 'fastboot flash recovery stock-recovery.img'
or just using miflashtool without adding any stock recovery?
Click to expand...
Click to collapse
Use Miflash and read the tutorial carefully.
Miflash=Fastboot rom

Thank you, i unbricked it, and i installed lineage. Great Job