Related
Hi guys,
As soon as I got the OP3 in July, I somehow managed to successfully perform all the steps to get it rooted. I was running OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
OnePlus has been showing me a "new version available" since September, but I very patiently and calmly didn't install it OTA because I didn't want to lose the root.
Finally had a bit of time today, decided I'd finally upgrade. Looked around for the "most recent stable version" and picked this one: OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
Followed the steps for flashing using TWRP (twrp-3.0.2-1.28-oneplus3) here:
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
It worked. Yay. Then (god dammit **** ****) I still saw this "new version available" and couldn't swipe it away... I accidentally clicked it and it downloaded the OTA. Fine.
Now I'm stuck in a TWRP boot loop. I tried re-installing the OTA_035.zip from TWRP -- I tried restoring my Nandroid Backup (only had enough room to save "Boot / Recovery / System" partitions, NOT data) -- and I tried ADB Sideloading 16_OTA_013.zip.
I'm stuck rebooting in TWRP 3.0.2-1.
Is there anything I can try before going ballistic and wiping my data?
Thanks.
Marc
Have you tried the newest blu-spark twrp? https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Puddi_Puddin said:
Have you tried the newest blu-spark twrp? https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Click to expand...
Click to collapse
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Zingapuro said:
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Click to expand...
Click to collapse
After you've flashed the full zip, flash also the latest stable version of SuperSu (2.79) and latest TWRP from @eng.stk (the v11, it solves the dm-verity error). Then reboot to recovery, it should appear TWRP and the error should't appear.
Zingapuro said:
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Click to expand...
Click to collapse
There are quite a few versions of TWRP from eng.stk (bluspark). Which one did you install? Try version 11 which is supposedly for N or 3.0.2-19 or 23.
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Zingapuro said:
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Click to expand...
Click to collapse
Try the other two given by me.
Zingapuro said:
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Click to expand...
Click to collapse
From where have you dowloaded the OTA? XDA or OnePlus forum?
I saw a thread regarding the OnePlus 3T update some post above, if you've downloaded from there you've made a mistake if you own a OnePlus 3.
tnsmani said:
Try the other two given by me.
Click to expand...
Click to collapse
You mean 3.0.2-19 or 23. Not blu_spark, right? Ok I tried twrp-3.0.2-23-oneplus3.img from here (https://www.androidfilehost.com/?fid=529152257862684308)
I tried flashing my old images I used last year (I just wanted the phone to boot into *something*) Oxygen_16_OTA_013 & SuperSU-v2.74. Managed to boot. Updated 4 Apps (??) But as soon as the login screen came up, it would reboot ... and keep looping. So I couldn't use the phone, but at least I managed to boot into something other than TWRP.
Next I tried to reinstall OOS4, 16_OTA_035 with SuperSU-v2.79 SR2. Still get the verity error, but at least I managed to boot! But - the phone is *super* buggy/unusable... SIM cards aren't working - I can't access my options screen - and "Developer options are not available for this user".
Now from my "About" screen I have OOS 4.0, Android 7.0, Kernel version 3.18.31-perf+ [email protected] <-- (that's from my TWRP version. right?)
Did the OTA I install from OnePlus directly screw everything up? For that brief moment before I installed it, I tasted a seemingly properly working OOS 4, so I know it's possible...
A few lessons I've learned are -- I can use any recovery (TWRP) to use MTP and flash files and stuff... but in order for the phone to work properly, I have to a) flash the SuperSU (not just the ROM) and b) make sure I have the "correct/proper" TWRP (kernel?) matched with each ROM. Is that kind of right? That's where I'm stuck I guess.
let92 said:
From where have you dowloaded the OTA? XDA or OnePlus forum?
I saw a thread regarding the OnePlus 3T update some post above, if you've downloaded from there you've made a mistake if you own a OnePlus 3.
Click to expand...
Click to collapse
I downloaded from here
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
I'm sure I'm making a ton of mistakes -- that's why I'm here
(I read here https://forum.xda-developers.com/on...mple-trick-t3530685/post70415499#post70415499 that .28 shouldn't be used)
This post mentions a procedure to get rid of verity https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
I'm currently backing up my data, and I'll attempt to follow these instructions to switch to f2fs (hopefully get rid of the verity error) and install OxygenOS 4.0.1 (http://otafsc.h2os.com/patch/amazon...n_16_OTA_037_all_1701041839_aa64b084a40a4.zip)
I'm also a bit confused about the best version of SuperSU-v2.79 to use, because blu_spark was writing somewhere (can't find where) that SR1 and SR2 were the cause of battery issues ... So yeah, I've got other things to try, but should the ROM from OOS4.0.1 work with any of them?
THANKS.
Zingapuro said:
You mean 3.0.2-19 or 23. Not blu_spark, right? Ok I tried twrp-3.0.2-23-oneplus3.img from here (https://www.androidfilehost.com/?fid=529152257862684308)
I tried flashing my old images I used last year (I just wanted the phone to boot into *something*) Oxygen_16_OTA_013 & SuperSU-v2.74. Managed to boot. Updated 4 Apps (??) But as soon as the login screen came up, it would reboot ... and keep looping. So I couldn't use the phone, but at least I managed to boot into something other than TWRP.
Next I tried to reinstall OOS4, 16_OTA_035 with SuperSU-v2.79 SR2. Still get the verity error, but at least I managed to boot! But - the phone is *super* buggy/unusable... SIM cards aren't working - I can't access my options screen - and "Developer options are not available for this user".
Now from my "About" screen I have OOS 4.0, Android 7.0, Kernel version 3.18.31-perf+ [email protected] <-- (that's from my TWRP version. right?)
Did the OTA I install from OnePlus directly screw everything up? For that brief moment before I installed it, I tasted a seemingly properly working OOS 4, so I know it's possible...
A few lessons I've learned are -- I can use any recovery (TWRP) to use MTP and flash files and stuff... but in order for the phone to work properly, I have to a) flash the SuperSU (not just the ROM) and b) make sure I have the "correct/proper" TWRP (kernel?) matched with each ROM. Is that kind of right? That's where I'm stuck I guess.
I downloaded from here
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
I'm sure I'm making a ton of mistakes -- that's why I'm here
(I read here https://forum.xda-developers.com/on...mple-trick-t3530685/post70415499#post70415499 that .28 shouldn't be used)
This post mentions a procedure to get rid of verity https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
I'm currently backing up my data, and I'll attempt to follow these instructions to switch to f2fs (hopefully get rid of the verity error) and install OxygenOS 4.0.1 (http://otafsc.h2os.com/patch/amazon...n_16_OTA_037_all_1701041839_aa64b084a40a4.zip)
I'm also a bit confused about the best version of SuperSU-v2.79 to use, because blu_spark was writing somewhere (can't find where) that SR1 and SR2 were the cause of battery issues ... So yeah, I've got other things to try, but should the ROM from OOS4.0.1 work with any of them?
THANKS.
Click to expand...
Click to collapse
Unfortunately I haven't tried to update the phone yet, so I don't know what else you can do. But you can also follow the guide posted by @Viper The Ripper here:
https://forum.xda-developers.com/showpost.php?p=70499899&postcount=5
I think that it's simpler and I'll follow that one this weekend when trying to updating my phone
Zingapuro said:
Hi guys,
As soon as I got the OP3 in July, I somehow managed to successfully perform all the steps to get it rooted. I was running OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
OnePlus has been showing me a "new version available" since September, but I very patiently and calmly didn't install it OTA because I didn't want to lose the root.
Finally had a bit of time today, decided I'd finally upgrade. Looked around for the "most recent stable version" and picked this one: OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
Followed the steps for flashing using TWRP (twrp-3.0.2-1.28-oneplus3) here:
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
It worked. Yay. Then (god dammit **** ****) I still saw this "new version available" and couldn't swipe it away... I accidentally clicked it and it downloaded the OTA. Fine.
Now I'm stuck in a TWRP boot loop. I tried re-installing the OTA_035.zip from TWRP -- I tried restoring my Nandroid Backup (only had enough room to save "Boot / Recovery / System" partitions, NOT data) -- and I tried ADB Sideloading 16_OTA_013.zip.
I'm stuck rebooting in TWRP 3.0.2-1.
Is there anything I can try before going ballistic and wiping my data?
Thanks.
Marc
Click to expand...
Click to collapse
In my opinion, the only thing you can try is to make a data backup from recovery to any external storage (like a pendrive) by Otg, but it takes some risks. In case this partition has been damaged, you can get issues when you install the rom.
The safest you can do is clean installation in spite of you lose data so, full wipes and a new full rom.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
You have to install stock recovery, and then reboot into recovery, you will have a instalation error, reboot and loop solved Then, you can flash your twrp and su without loosing data
I discovered following this threath desesperate and going to do a clean install, dowload the files and try to do it steap by steap: https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
Good luck :good:
P.D.: I have formated system partition, so I lost the android configuration
satisastur said:
You have to install stock recovery, and then reboot into recovery, you will have a instalation error, reboot and loop solved Then, you can flash your twrp and su without loosing data
I discovered following this threath desesperate and going to do a clean install, dowload the files and try to do it steap by steap: https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
P.D.: I have formated system partition, so I lost the android configuration
Click to expand...
Click to collapse
Hey Satisastur,
Thanks for taking the time to comment. Yes, actually that's exactly the guide I wanted to follow. But I'm stuck before even starting -- if I make Nandroid Backup now (in ext4) I can't load it back once filesystem changes to f2fs -- isn't that right?
(I also asked the question in that thread: https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page8#post70525818 )
And uh... sorry... what exactly do you mean "android configuration"... like ringtones and stuff?
Zingapuro said:
Hey Satisastur,
Thanks for taking the time to comment. Yes, actually that's exactly the guide I wanted to follow. But I'm stuck before even starting -- if I make Nandroid Backup now (in ext4) I can't load it back once filesystem changes to f2fs -- isn't that right?
(I also asked the question in that thread: https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page8#post70525818 )
And uh... sorry... what exactly do you mean "android configuration"... like ringtones and stuff?
Click to expand...
Click to collapse
Yes, I was on f2fs before this happens, so I only have to install all without formating data. You should do a manual backup to do that, once on recovery, you be able to enter phone data partition from windows. Copy all folders you want to save before formating to f2fs in recovery. Other setup and configuration like ringtones and stuff, all cache and configuration of apps, wallpaper, led, colors and themes... you will lost it. I don't know how to backup that, but its the worst part of formating data... google backup doesn't save all the config
You will start with the android phone start menu, like new, with new dactilar and patron security, etc...
@Zingapuro
Try TWRP 3.0.2_19 and Supersu 2.79 stable. For some people this works and according to eng. stk, only Supersu 2.79 stable is compatible with N.
tnsmani said:
Try TWRP 3.0.2_19 and Supersu 2.79 stable. For some people this works and according to eng. stk, only Supersu 2.79 stable is compatible with N.
Click to expand...
Click to collapse
Tried flashing twrp-3.0.2-19-oneplus3.img and from TWRP installing:
OnePlus3Oxygen_16_OTA_037_all_1701041839_aa64b084a40a4.zip
UPDATE-SuperSU-v2.79-20161211114519.zip
Same issues as described above: boots into 4.0.1, but buggy, SIM cards don't work, no Dev options, etc...
satisastur said:
Copy all folders you want to save before formating to f2fs in recovery.
Click to expand...
Click to collapse
Yeah, I have a feeling this is my only choice. This is the next thing I'll try.
Zingapuro said:
Tried flashing twrp-3.0.2-19-oneplus3.img and from TWRP installing:
OnePlus3Oxygen_16_OTA_037_all_1701041839_aa64b084a40a4.zip
UPDATE-SuperSU-v2.79-20161211114519.zip
Same issues as described above: boots into 4.0.1, but buggy, SIM cards don't work, no Dev options, etc...
Yeah, I have a feeling this is my only choice. This is the next thing I'll try.
Click to expand...
Click to collapse
Try this guide: https://forum.xda-developers.com/oneplus-3/how-to/guide-flashing-oos-v4-0-1-custom-rom-t3537757
It will fix most of your issues.
For going back to full stock use this guide: https://forums.oneplus.net/threads/guide-how-to-unroot-your-oneplus-3-and-go-back-completely-to-stock.456232/
I hope everything will go back to normal.
Hi everyone,
Just want to update that my phone is back up and running. Thanks for your all your help.
More details here:
https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page9#post70588707
Is there any way to update this thread to [SOLVED] ?
Zingapuro said:
Hi everyone,
Just want to update that my phone is back up and running. Thanks for your all your help.
More details here:
https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page9#post70588707
Is there any way to update this thread to [SOLVED] ?
Click to expand...
Click to collapse
Great!
I think you can edit the thread title
Boot into your recovery [Vol+ and Power]
Connect your phone to your PC
Execute the following fastboot command on your PC (More informations on fastboot)
Code:
fastboot continue
Your phone will start right away. :good:
No matter how many resets I just can't boot into my recovery or the OS. If I try to reboot the system all that happens is the TWRP splash screen pops up, hangs there for a while, reboots to the splash screen again and repeats. Is this a brick? The most I can do is get into fastboot mode. Please, any advice would be very much appreciated. I feel like a total dipstick. The ROM I'm on is Resurrection Remix official N and the TWRP version is 3.1.1-0. This combo was never an issue before.
showofdeth said:
No matter how many resets I just can't boot into my recovery or the OS. If I try to reboot the system all that happens is the TWRP splash screen pops up, hangs there for a while, reboots to the splash screen again and repeats. Is this a brick? The most I can do is get into fastboot mode. Please, any advice would be very much appreciated. I feel like a total dipstick. The ROM I'm on is Resurrection Remix official N and the TWRP version is 3.1.1-0. This combo was never an issue before.
Click to expand...
Click to collapse
Use the unbrick guide method 2. Make sure you follow ALL steps otherwise it will not work..
Feel free to ask any questions!
First, go in FastBoot mode & reflash recovery from PC.
null0seven said:
First, go in FastBoot mode & reflash recovery from PC.
Click to expand...
Click to collapse
Tried that using different TWRP versions but it didn't work. My issue still persisted.
Puddi_Puddin said:
Use the unbrick guide method 2. Make sure you follow ALL steps otherwise it will not work..
Feel free to ask any questions!
Click to expand...
Click to collapse
Thanks but that that seemed a bit daunting so after MUCH searching I found a thread with a very simple fix. In fastboot type the command "fastboot format cache" and "fastboot format user data". I lost all my stuff but I'm up and running again.
However, I have a new issue. "system" is taking up 29gb of space. What's that about?
showofdeth said:
Thanks but that that seemed a bit daunting so after MUCH searching I found a thread with a very simple fix. In fastboot type the command "fastboot format cache" and "fastboot format user data". I lost all my data but I'm up and running again.
However, I have a new issue. "system" is taking up 29gb of space. What's that about?
Click to expand...
Click to collapse
Try the latest OOS 4.2.5.. It had some fixes
Puddi_Puddin said:
Try the latest OOS 4.2.5.. It had some fixes
Click to expand...
Click to collapse
I like OOS and all but I like the customisation of RR more. Cheers though.
You did even better. Now you have a Clean phone, because you wipe it all.
It's from your rom. I'm on Oos 4.1.5. Look at mine.
null0seven said:
You did even better. Now you have a Clean phone, because you wipe it all.
It's from your rom. I'm on Oos 4.1.5. Look at mine.
Click to expand...
Click to collapse
Can you install oos through TWRP? Maybe as recommended it may fix my storage issue.
How else ?
Never did Fastboot sideload.
I instal any rom ONLY in TWRP.
showofdeth said:
No matter how many resets I just can't boot into my recovery or the OS. If I try to reboot the system all that happens is the TWRP splash screen pops up, hangs there for a while, reboots to the splash screen again and repeats. Is this a brick? The most I can do is get into fastboot mode. Please, any advice would be very much appreciated. I feel like a total dipstick. The ROM I'm on is Resurrection Remix official N and the TWRP version is 3.1.1-0. This combo was never an issue before.
Click to expand...
Click to collapse
showofdeth said:
Tried that using different TWRP versions but it didn't work. My issue still persisted.
Click to expand...
Click to collapse
At this point I'm sure it's a firmware related issue.
Download and install latest one here: https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
Stable or Open Beta, doesn't matter.
Then... what TWRP have you tried? For custom roms is highly recommended the blu_spark variant.
Because the stock TWRP is good only for OOS-based firmware, with other configurations it may not boot up at all.
showofdeth said:
Thanks but that that seemed a bit daunting so after MUCH searching I found a thread with a very simple fix. In fastboot type the command "fastboot format cache" and "fastboot format user data". I lost all my stuff but I'm up and running again.
However, I have a new issue. "system" is taking up 29gb of space. What's that about?
Click to expand...
Click to collapse
What have you done? ?
Two theories:
1) You've done encryption via custom rom.
2) After formatting /data via fastboot commands, you've not installed and booted up once latest OOS rom.
Until doing that, device will read 25 GB of free space, both in recovery and system.
I don't know the reason of that trouble.
So you have to:
1) Install latest OOS firmware (via TWRP / adb sideload);
2) Bootup once the system: be sure to choose a pattern required at bootup, for the rest skip wizard as fast as possible;
3) Install latest TWRP blu_spark via fastboot command;
4) From recovery, wipe everything and flash Resurrection Remix.
Tell me if you solve ?
Simone98RC said:
At this point I'm sure it's a firmware related issue.
Download and install latest one here: https://forum.xda-developers.com/oneplus-3/how-to/radio-modem-collection-flashable-zips-t3468628
Stable or Open Beta, doesn't matter.
Then... what TWRP have you tried? For custom roms is highly recommended the blu_spark variant.
Because the stock TWRP is good only for OOS-based firmware, with other configurations it may not boot up at all.
What have you done?
Two theories:
1) You've done encryption via custom rom.
2) After formatting /data via fastboot commands, you've not installed and booted up once latest OOS rom.
Until doing that, device will read 25 GB of free space, both in recovery and system.
I don't know the reason of that trouble.
So you have to:
1) Install latest OOS firmware (via TWRP / adb sideload);
2) Bootup once the system: be sure to choose a pattern required at bootup, for the rest skip wizard as fast as possible;
3) Install latest TWRP blu_spark via fastboot command;
4) From recovery, wipe everything and flash Resurrection Remix.
Tell me if you solve
Click to expand...
Click to collapse
I've fixed everything. Flashed a OOS based ROM then did a factory wipe in TWRP and then installed a new RR ROM. Panic over. Sorted.
Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?
I have the same problem, it comes back to recovery all the time and we can tell you about it, some help please
---------- Post added at 09:59 PM ---------- Previous post was at 09:43 PM ----------
Hi, I've come back, hahaha, I installed resurrection remix 7.1, previous all the wipes and reboot in bootloader I gave start and started, great.
I had this problem trying to install the rom ViperOS. I solved it with one of these steps:
- Boot into Fastboot, select "Start" with volume Keys.
- Flash "boot.img" directly from the zip that is ROM, do this using a PC.
- If you're using stock rom, reflash boot.img
Greetings
CypherPotato said:
I had this problem trying to install the rom ViperOS. I solved it with one of these steps:
- Boot into Fastboot, select "Start" with volume Keys.
- Flash "boot.img" directly from the zip that is ROM, do this using a PC.
- If you're using stock rom, reflash boot.img
Greetings
Click to expand...
Click to collapse
Does not work for me.
I have flash boot.ini Atomic-OS-1.5 and OCT-N-WEEKLY ...
My phone boot always in recovery
regards
Sry for my bad english.
SuperUtilisateur said:
Does not work for me.
I have flash boot.ini Atomic-OS-1.5 and OCT-N-WEEKLY ...
My phone boot always in recovery
regards
Sry for my bad english.
Click to expand...
Click to collapse
Have you tried to boot from Fastboot?
Yes, it works once...
But if I have to restart it (or turn off and start with the power button), the phone boot always in recovery.
It is then necessary to restart fastboot then press "start".
Haxorkat said:
Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?
Click to expand...
Click to collapse
Try do a full reset through fastboot and then try installing whatever you need through fastboot and recovery. Much more reliable han ota installs/updates
Haxorkat said:
Hey guys, hello there. I need a little help over here.
The other day I made the mistake to install an OTA on my rooted Moto G5 (dual SIM). I had the stock image, TWRP & unlocked bootloader. Of course it failed to install the OTA, but the weird thing is that it always boots to TWRP recovery. No matter if I choose to reboot completely or to boot to system from the TWRP reboot menu, it always goes back to TWRP.
Tried a few things, but none of them worked. Mainly I remember trying the "fastboot oem fb_mode_clear" and did nothing. I didn't try this solution even though problem looks similar. Mainly I didn't want to have to unlock the bootloader and install recovery all over again.
Later I discovered that if I go to the bootloader and hit START from there, boots into OS. So it is functional.
Anyway, I installed Atomic OS ROM thinking I'll get rid of the problem and gain a custom ROM, and everything works, but the problem stays. If I reboot the phone, I have to do TWRP -> Bootloader -> System in order to get it to the OS.
Anyone has any idea on how to fix it?
Click to expand...
Click to collapse
install resurrection remix and lock with the update of the security patch as we know, then install via fastboot the original firmware, after rebooting install resurrection and now bootea normalmally greetings
grosobart said:
install resurrection remix and lock with the update of the security patch as we know, then install via fastboot the original firmware, after rebooting install resurrection and now bootea normalmally greetings
Click to expand...
Click to collapse
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
It always says that
As long as it says at the end
Write OK
It flashed successfully
OK,
After flash,
boots automatically into recovery ...
--
I tried with various boot.img. (linéage, AOSP, OctOS, ... )
Does not work ..
I started (into fastboot), I was errors. (Process stopped)
I just restored my phone ( https://mirrors.lolinet.com/firmware/moto/cedric/official/RETAIL/ )
... boot correctly.
Never mind ...
thank you all
SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
https://forum.xda-developers.com/g5/how-to/fyi-recovered-g5-xt-1676-to-stock-t3626088
try this first, regards
SuperUtilisateur said:
>writing 'boot'...
>(bootloader) Image not signed or corrupt
Does not work.
Maybe because of the model? (XT1676)
--
Click to expand...
Click to collapse
you should flash the correct firmware on your device and it should work, I did it several times and it works perfect
Moto G5 boots to TWRP
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??
Noel Carson said:
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??
Click to expand...
Click to collapse
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup
rajibahmed said:
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup
Click to expand...
Click to collapse
Backing up Gigs of data is a huge pain. Even if I have to copy to my pc. So, just something that's less cumbersome.
Noel Carson said:
I have the same issue. But the suggestions posted wouldn't help me. I have the stock ROM and I'm rooted with Magisk using TWRP recovery. I want to keep the stock ROM and don't want to go through the trouble of backing my data again. So, I was wondering if there was any work around. Would flashing the stock ROM, Boot and recovery without deleting user data partition help??
Click to expand...
Click to collapse
rajibahmed said:
Back up your stuff. By cloud or other means. Then reset and load your back up on boot or boot setup
Click to expand...
Click to collapse
Read the faq section (2nd post) - answer is there
https://forum.xda-developers.com/g5/development/official-twrp-3-1-1-0-moto-g5-t3699737
grosobart said:
you should flash the correct firmware on your device and it should work, I did it several times and it works perfect
Click to expand...
Click to collapse
Anyone get the stock for 16gb/2gb version?
hi there,
i used crDroidAndroid-8.1-20180606-riva-v4.3 but there were color problems i didnt know 2 fix so i decided 2 flash a new rom resp. a newer version but no custom rom boots up.
when it tries 2 boot is freezes at the boot screen, then screen switches off and nothing happens. i can go 2 fastboot and recovery.
sometimes it boots up but after a few seconds it freezes 2.
i tried different roms and recoveries but nothing works.
i foolishly wiped internal storage once but then i flashed the stock rom again which boots up. then i unlocked the bootloader and flashed a custom recovery and a rom again but the same error is there (no booting up)
anyone got a solution for this problem? no unbricking suggestions plz
edit: im in the wrong thread i think. i wanted 2 post it in "Guides, News, & Discussion". cant delete it. sry for that
logs
so i managed 2 create logs while booting up.
1) https://pastebin.com/cgrX2DA1
2) https://pastebin.com/r7DmcN46
3) https://pastebin.com/0pwXyuys
4) https://pastebin.com/S41FG2SQ
1) is 1st part of the log while booting with no success to boot into the os.
2) is 2nd part of the log while booting with no success to boot into the os.
3) is 1st part of the log while booting with successful boot into the os.
4) is 2nd part of the log while booting with successful boot into the os.
i also tried 2 log "cat /proc/last_kmsg > /sdcard/last_kernel_message_log.txt"
and "dmesg > /sdcard/kernel_boot_log.txt" via terminal in linux but it only sais file or directory not found.
i hope sum1 can give me sum help now.
so i did this https://en.miui.com/thread-3921604-1-1.html but it doesnt help. as i expected.
any1? i can post more information if necessary. just say which and perhaps how ;D
cmon guys. i can impossibly b the only 1 who faces this problem.
i dont think its a hardware thing cause stock rom and android 7.1.2 (viper os) work. maybe a vendor problem? could flash another vendor img solve this problem? can sum1 send me his?
i got sum more logs after flashing rr 7.0:
logcat 1st part: https://pastebin.com/EBZAgbhF
logcat 2nd part: https://pastebin.com/qaMFrvxi
dmesg: https://pastebin.com/Gg8bYkJy
cheers
Fastboot flash latest miui 10 stable using mi flash tool and use the rom after setting up. Then flash custom recovery and do a full wipe.
This works for most cases.
NaAnBcEhEuL9A8K7 said:
Fastboot flash latest miui 10 stable using mi flash tool and use the rom after setting up. Then flash custom recovery and do a full wipe.
This works for most cases.
Click to expand...
Click to collapse
thx for ur answer but i tried this already. does not work on android 8 and 9 roms
daemonicvs said:
thx for ur answer but i tried this already. does not work on android 8 and 9 roms
Click to expand...
Click to collapse
Well it worked for me.
Which custom rom you want to use?
well, it doesnt matter 2 me. the main thing is that it works =D rr, aex, crdroid..
daemonicvs said:
well, it doesnt matter 2 me. the main thing is that it works =D rr, aex, crdroid..
Click to expand...
Click to collapse
Crdroid is my choice because aex and rr are very early builds. I like pixel experience but the devs not updating it so crdroid or havoc os.
Like i said use Xiaomi flash tool and flash miui 10 stable via fastboot method(there are 3 options in the bottom select flash all instead of flash and lock to avoid unlocking the bootloader again), don't flash anything else, setup and use the phone, flash recovery wipe all and format, install rom, don't flash gapps yet, boot into rom and see if its fixed.
Use vendor based recovery, if using batik recovery you have to flash batik recovery again after format.
This is my solution.
NaAnBcEhEuL9A8K7 said:
Crdroid is my choice because aex and rr are very early builds. I like pixel experience but the devs not updating it so crdroid or havoc os.
Like i said use Xiaomi flash tool and flash miui 10 stable via fastboot method(there are 3 options in the bottom select flash all instead of flash and lock to avoid unlocking the bootloader again), don't flash anything else, setup and use the phone, flash recovery wipe all and format, install rom, don't flash gapps yet, boot into rom and see if its fixed.
Use vendor based recovery, if using batik recovery you have to flash batik recovery again after format.
This is my solution.
Click to expand...
Click to collapse
i did it several times before but 2 b safe i did it again like that:
i flashed riva_global_images_V10.1.1.0.NCKMIFI_20181029.0000.00_7.1_global_f444c158ed.tgz using XIAOMI-TOOL-MiFlash-for-Linux-by-IceMan-master. im on linux mint 18.3. i have 4 options:
flash_all_lock.sh
flash_all_lock_crc.sh
flash_all_except_data_storage.sh
flash_all.sh
i chose flash_all.sh
i booted into the stock rom and set it up, enabled dev options and adb.
then i switched it off, went into bootloader, flashed twrp-3.2.3-0-riva.img via fastboot.
after that i entered twrp, flashed OrangeFox-R8.3-riva.zip and rebooted into recovery
i wiped everything except external sd and usb otg (i dont have these)
after a reboot intorecovery i formatted data then rebooted in recovery
i flahed crDroidAndroid-9.0-20181002-riva-v5.0.zip
then reboot into system
no success as i expected! wtf is wrong wtf. this cant b true!
but thank u very much for ur efforts! perhaps i would try 2 restore a vendor img from sum1 which rom does work. i know its a great demand but could u send me urs? ;D i dont know if there r sum personal info..
best regards
Don't give up there might be a solution.
Pray to God for some help.
:good:
---------- Post added at 01:23 PM ---------- Previous post was at 12:59 PM ----------
Currently I am using Xiaomi.eu beta rom. You can check their website for all the features. Its smooth, stable and can update without needing to got the recovery:victory:
This should work for you because unlike other roms this is based on miui for riva. That means you will get updates till Xiaomi ditches support for riva.
I recommend you use this rom over the global rom until you fix the problem with your phone.
Some things missing:
Choice of region is limited( India is not available)
There is no custom kernel available for miui oreo as of now.
Magisk safetynet not passed
If you're going flash this rom you need to be on latest global beta fastboot rom and need a recovery that supports oreo base.
I use batik recovery base oreo.
yes. i cant b the only 1 facing this problem...!? really. i cant!
thx anyway
daemonicvs said:
yes. i cant b the only 1 facing this problem...!? really. i cant!
thx anyway
Click to expand...
Click to collapse
Maybe you can be the only one facing this problem.
Try joing telegram community maybe your problem will get fixed from there.
NaAnBcEhEuL9A8K7 said:
Maybe you can be the only one facing this problem.
Try joing telegram community maybe your problem will get fixed from there.
Click to expand...
Click to collapse
theres no difference between my device and yours... everybody must have this problem ;/
daemonicvs said:
theres no difference between my device and yours... everybody must have this problem ;/
Click to expand...
Click to collapse
Did you try edl method?
NaAnBcEhEuL9A8K7 said:
Did you try edl method?
Click to expand...
Click to collapse
yes. i could flash the stock rom this way but the problem is not solved this way
daemonicvs said:
yes. i could flash the stock rom this way but the problem is not solved this way
Click to expand...
Click to collapse
At least you have to try.
I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.
Eddyb299 said:
I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.
Click to expand...
Click to collapse
Did you flash lazy flasher?
Eddyb299 said:
I just unlocked my 5a today tried aosp rremix, pixel ex, no luck. the phone won't boot up. plus excno ept "TWRP-Oreo-Riva-STREBLE-Mod-sjcbank" no other recovery works. tried normal twrp orangefox, no luck.
Click to expand...
Click to collapse
dont u have 2 wait 2 weeks or so till bootloader is unlocked?
what exactly do u mean with won't boot up? bootloop? or stuck at boot logo?
after flashing a custom recovery, did u boot directly into the system or did u try 2 boot into recovery? sometimes the stock recovery overwrites the custom 1 when stock rom boots up
my problem is solved. i remembered that i made a full nandroid backup with twrp before i flashed a new rom and the problem appeared. so i restored everything i backed up with twrp (incl cust) and voila, rom booted up. and i can wipe system and data and flash every rom i wanna and it still boots up \o/
i really could have tried it earlier but i didnt think of this untill yesterday ;D
well, thx for ur efforts anyway buddy @NaAnBcEhEuL9A8K7
cheers
Hello Good day everyone, please help this idiot who just bricked his phone for no reason at all:crying:
I accidentally wipe my system or should i say im just flat out an idiot for wiping everything without any backup. i have installed twrp and i unlock the bootloader already because i wanted to install miui in my mi a2 lite phone but ended up wiping everything and now im stuck in twrp mode. i still can do fastboot and open my phone in twrp mode but thats all NO OS. How can i save my phone back to normal. please help me. THANK YOU ALL!!!
If you can get to fastboot, use the stock rom flash script. See the stock rom thread in the guides forum.
If you've got windows, miflash may be easier to use. I think it takes the same stock rom file.
a1291762 said:
If you can get to fastboot, use the stock rom flash script. See the stock rom thread in the guides forum.
If you've got windows, miflash may be easier to use. I think it takes the same stock rom file.
Click to expand...
Click to collapse
Just make sure you download a fastboot rom which has all partitions.
When I wanted to remove all traces of root from my phone last week, i noticed that many of the more recent images only have /system or just a few partitions.
I ended up installing one of the earliest Pie images (V10.0.2.0.PDLMIFJ if i recall correctly) and then doing all the OTA's until I was at V11.0.9.0.QDLMIXM or something.
Fix
idiotAce said:
Hello Good day everyone, please help this idiot who just bricked his phone for no reason at all:crying:
I accidentally wipe my system or should i say im just flat out an idiot for wiping everything without any backup. i have installed twrp and i unlock the bootloader already because i wanted to install miui in my mi a2 lite phone but ended up wiping everything and now im stuck in twrp mode. i still can do fastboot and open my phone in twrp mode but thats all NO OS. How can i save my phone back to normal. please help me. THANK YOU ALL!!!
Click to expand...
Click to collapse
It happened to me like a week ago and i was able to fix it just yesterday. cuz i am new at this root stuff. But i was able to do it at th e end. You need to install stock rom, miflash. Also download flashable stock rom. Because i installed like 5 stock roms. But they were not flashable so it did not work. Extract the stock rom that you downloaded. Then open miflash. Now go into fastboot mode and plug your phone to your pc. Now locate the folder where flashable files are and then click flash. It should say Success. If not that means it did not work.But it should work so yeah. That is it.
guys my phone boots into fastboot only, no twrp no recovery, any way to fix it?
drshnitzelbauer said:
guys my phone boots into fastboot only, no twrp no recovery, any way to fix it?
Click to expand...
Click to collapse
fastboot oem edl
then launch miflash tool
sushi689 said:
fastboot oem edl
then launch miflash tool
Click to expand...
Click to collapse
it just saved my life and my phone idk how it worked but i fixed it. thanks a lot!!!!!!!!!!!!