Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Did you follow the instructions to flash TWRP using Odin?
olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear
bump
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?
N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.
N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post
aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.
Related
I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:
Improper recovery.
samelaryan said:
I know this has been asked hundreds of times, and i searched the forums for days for a way to fix it, but with no use.
I have a rooted AT&T Galaxy SIII with JB 4.1.1. I am trying to install the CM 10.1(4.2.2) Nightly version, but i always get the infamous "Status 7 Installation Aborted" error.
Yes i am sure im downloading the correct ROM zip file for my phone and carrier.
I have CWM 6.0.2.1, and i followed the steps correctly. (Clear data -> Clear Cache Partition -> Clear Dalvik Cache -> install ROM)
I have tried so many times, i also re-rooted my phone, reinstalled CWM, and redownloaded different nightly versions of the ROM, as well as other ROMS like JellyBam.
I also tried to delete the assert lines in the update-script file, but that also wouldnt work.
Thank you. :good:
And please dont hate on me, im new to rooting and flashing. :crying:
Click to expand...
Click to collapse
BAM1789 said:
Improper recovery.
Click to expand...
Click to collapse
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers
xBeerdroiDx said:
if you can boot into the phone, download ROM manager and update your cwm recovery. latest version is 6.0.2.8.
CM10 and 10.1 are picky about you having the most recent version. cheers
Click to expand...
Click to collapse
I did that and it worked thank you :good:
samelaryan said:
I did that and it worked thank you :good:
Click to expand...
Click to collapse
thats what we're all here for, buddy
Status 7: installation aborted.
xBeerdroiDx said:
thats what we're all here for, buddy
Click to expand...
Click to collapse
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.
perceptorz said:
Hi guys, I'm having same issue but on N7000 international version. I'm able to go in the recovery mode and download mode but phone won't boot normally. It's stuck on Samsung logo so can you please advise something? How can I update CWM if that's the issue. I was on ICS 4.0.4 XXLRK before trying to install CM10.1 on Note.
Thanks in advance for your help.
Click to expand...
Click to collapse
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot
xBeerdroiDx said:
I would be doing my research in an N7000 forum, friend.
Also, your post seems confusing as you seem to be saying you also got a status 7 error but then you appear to have installed abroad and are stuck at the boot logo. If you successfully flashed the correct rom for your device without any errors, pull battery, replace and wipe data in recovery. Reboot
Click to expand...
Click to collapse
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.
perceptorz said:
Apologies for both confusion and using the S3 that to find some help. I just found the situation quite familiar so I couldn't help myself from asking the question
On the situation, I was able to install CWM and am able to go to recovery or download mode but the error displays when I try to update the zip of any rom.
Click to expand...
Click to collapse
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.
xBeerdroiDx said:
If the phone itself is functioning fine but you simply cannot flash a new rom or rom update, you need to update your recovery. Go to clockworkmods website and download version 6.0.1.2.
Click to expand...
Click to collapse
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)
perceptorz said:
Right now, phone doesn't get pass Samsung boot logo so will I be able to update new CWM using Odin? (Sorry, if the question appears to be basic or stupid)
Click to expand...
Click to collapse
I would take up this situation in the correct forum. The more we discuss your device issues the more likey you are to download the wrong file or use a procedure not designed for your device software.
If you came from stock, flashed a rom and are stuck at the samsung logo, boot into recovery, wipe data and cache. Reboot to see if that helped. If not, seek advice in the N7000 forum. Cheers
Thanks for the guidance.
Hello,
I've tried everything that the internet has to offer so far and still can't get the newest version to install on my phone without failing somewhere in the installation process.
I feel like asking for help isn't of much use, because it could be everything.
I tried resetting the phone completely with this guide: http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
After that I wanted to install the update again, and still no success.
Next time you make a thread regarding an issue be kind enough to tell us the state of your phone to the best of your knowledge, whether its working or not? does it show the oneplus logo or not..... these things matter plenty!
judging from the what you have mentioned in your post, your main issues is not being able to install the latest update.
try these steps
1. download this file https://www.androidfilehost.com/?fid=24591000424945019 [thanks to namman bhalla for his thread, http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870]
2. copy and paste it onto your phone.
3. now boot into your phones recovery twrp preferred
4. from there choose the option which says..... click install new zip. and select the zip that you downloaded....
it should work if it doesn't, give us a detailed description of what and all you have done with your phone whether you have unlocked the bootloader, whether there is a custom recovery installer and most importantly whether you have nandroid backup of your device.
ajaysoranam said:
Next time you make a thread regarding an issue be kind enough to tell us the state of your phone to the best of your knowledge, whether its working or not? does it show the oneplus logo or not..... these things matter plenty!
judging from the what you have mentioned in your post, your main issues is not being able to install the latest update.
try these steps
1. download this file https://www.androidfilehost.com/?fid=24591000424945019 [thanks to namman bhalla for his thread, http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870]
2. copy and paste it onto your phone.
3. now boot into your phones recovery twrp preferred
4. from there choose the option which says..... click install new zip. and select the zip that you downloaded....
it should work if it doesn't, give us a detailed description of what and all you have done with your phone whether you have unlocked the bootloader, whether there is a custom recovery installer and most importantly whether you have nandroid backup of your device.
Click to expand...
Click to collapse
I tried using that method and it failed, I can get into recovery just fine and my bootloader is unlocked because I flashed twrp
I have a backup I made in twrp.
I got the official support tool (MsMDownloadTool) and I could restore my phone to 3.1.2 but it still crashes apps and is very unstable.
If I now try to install the update again, or try to flash the full OxygenOS 3.2.1 or 3.1.2 I get the Error 7 ("system partition has unexpected contents").
I dont get this error because the system partition couldnt have been modified, because I didnt even start the phone , I just got into recovery and tried updating it.
I'm losing my mind on this.
Sorry if that was a ramble and isn't understandable
calm down!
boot into twrp, wipe system ,data, cache, dalvik. now try flashing the latest full rom i.e. 3.2.2.
try this and let me know....
if it didn't work give me step by breakdown of what you did.....
DeadlyVirez said:
I tried using that method and it failed, I can get into recovery just fine and my bootloader is unlocked because I flashed twrp
I have a backup I made in twrp.
I got the official support tool (MsMDownloadTool) and I could restore my phone to 3.1.2 but it still crashes apps and is very unstable.
If I now try to install the update again, or try to flash the full OxygenOS 3.2.1 or 3.1.2 I get the Error 7 ("system partition has unexpected contents").
I dont get this error because the system partition couldnt have been modified, because I didnt even start the phone , I just got into recovery and tried updating it.
I'm losing my mind on this.
Sorry if that was a ramble and isn't understandable
Click to expand...
Click to collapse
Not my work but it works now.
How to
Reboot in recovery
Wipe device
Flash Rom and kernel:
Download for rom:
Flash this after:
Reboot
Recommend using twrp 3.0.0.1
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
FingerBlastJ said:
what about the hardware keys? do they work with moar rom and this kernel or do we need virtual hardware keys?
Click to expand...
Click to collapse
Kernel fixes hardware issues
and if I'm on note 5 moar rom with patch.... no issue flashing right?
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Blzfrost said:
Sky-high made us a kernel? Sweet sadistic smiles, success! So happy. Anyone know if it'll work like the LP patch did for note roms, or does more need to happen first? Or do people just need to start trying and report back?
-edit-
Clicked the link and saw it was a note 5 Rom. What can I say, I was excited!
Click to expand...
Click to collapse
Just flash Rom and kernel everything will work.
MonkeyAround said:
Just flash Rom and kernel everything will work.
Click to expand...
Click to collapse
Oh I'm setting everything up right now for the flash! I'm so excited. Once I realized you linked to a note 5 Rom most of my questions got answered. My favorite part, the kernel was posted on my bday.
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
FingerBlastJ said:
i tried wiping and clearing cache then flashing the rom and the kernel. nothing actually happens to my phone. i end up on the same home screen and apps i had installed on moar 5.1.1 with note 5 patch.
any ideas why wiping my phone doesnt work on twrp 3.0.0.0?
Click to expand...
Click to collapse
Update your TWRP.
https://dl.twrp.me/zenltespr/
yea I tried doing that with Odin and it would freeze mid way. I also tried flashing a twrp update zip file on twrp and that didn't work either.
you think I should flash with flash fire?
bricked my phone by trying to flash newer version of twrp with twrp manager
been trying to flash unbrick tar and pit file to get back up and running but its not working.
any help is much appreciated
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
FingerBlastJ said:
fixed the brick by flashing new recovery in Odin, now on 3.0.2. still can't get the phone to wipe out install new rom and kernel
Click to expand...
Click to collapse
Have you checked for root with root checker? I have lost root access a few times in the past?
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
FingerBlastJ said:
yea I just checked with root checker and I have root access.
I've never had this happen to me... weird
anything else you can think of?
Click to expand...
Click to collapse
Last thing I can think of is when opening TWRP the first time. It asks if you want to make the system 'read only'. Did you select No?
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
FingerBlastJ said:
I never got that message when I flashed twrp 3.0.2 to unblock... how do I make it show up?
Click to expand...
Click to collapse
Not sure. You can click mount and see what is mounted. I am not sure that will work. I am not sure exactly what you are trying to wipe, but mount the items you are attempting to wipe and make sure the read-only is unchecked.
Try this:
Check to see if oem is checked
Re-root via root tar/odin
twrp 3.0.0.1 from edge files post in general
Backup stock
Wipe
Flash Moar
Don't reboot
Flash skyhigh kernel
Flash xposed(don't have to)
Reboot
Allow it to boot loop a couple time (from sky kernel)
Give 5-10 minutes to boot
I just did it with no issues and I've personally had more luck with 3.0.0.1 than any of the others.
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
FingerBlastJ said:
heres my issue...twrp doesnt do anything for me (all versions) whether i wipe or install
so i used flashfire to flash the rom and the kernel at once and it finally displayed aroma installer (wouldnt get that in twrp)
however, after it in stalled i got stuck on boot screen
the only fix for this was flashing unbrick aok3 tar file which brought me to stock
i put on twrp as a recovery again starting fresh unrooted and it still doesnt respond to any of my commands
i think i will try flash fire on stock one more time and see what happens since its the only thing that is responding
Click to expand...
Click to collapse
Your on Lp bootloader that's your issue.
Download Marshmallow tar from the general post I made for rooting Bpg1.
Flash tar and follow post.
twrp. 3.0.x.x is more for marshmallow. You need to be on 6.0.1 not 5.1.1.
Don't use fireflash on this device.
Fireflash is more for phones with locked bootloaders like Verizon s4 on the of1 update.
Fireflash isn't really up to date with our phone and could easily brick your device.
Stuck at "Patching System Image Unconditionally" when flashing CM12.1 via TWRP
Just got a Note 4, proceeding with the usual root and installation CyanogenMod ASAP
Everything was going smoothly until the actual flashing of CyanogenMod, whenever I try to flash it, it just gets stuck on "patching system image unconditionally" and doesn't progress beyond that point
Steps I've taken so far:
1) unboxed phone, was running Android 6.0 (I think, maybe 6.0.1)
2) Rooted with Chainfire's Auto Root
3) Flashed TWRP 3.0.2-0 via Odin 3.09 as per TWRP's instructions
4) Ensured that I could boot both to the stock ROM and TWRP
5) Copied cm12.1 and gapps to Note 4's internal storage (sd card hasn't come in yet, normally I put it onto sd card)
6) Did default factory wipe from TWRP
7) Attempted to flash cm12.1, ran into issue
I didn't make a backup of the stock ROM so now the phone has a recovery but no actual OS, as I had to pull the battery out to get it to do anything beyond being stuck at the patching system image step
I'm redownloading cm12.1 in case maybe there was a problem with the .zip itself, I know it's bad practice but I never check md5 sums
I've found other threads that suggested flashing the stock ROM for some reason, but they were for other phones and I'm not sure if it's related to the Note 4.
I've seen some mention of the bootloader being locked, but I don't know how to tell if the bootloader is locked or not. I see the same exact boot screen that I saw with my Note 3, S4, S3, etc. Could the issue be the bootloader?
I've also found this thread, but I can't get TWRP to mount in Windows, it keeps saying the driver failed to install. MTP transfers worked fine with the stock ROM was still there, but for some reason it doesn't work with the Mount option in TWRP. I'm downloading the Android SDK so I can try using adb
If anyone else has run into this, can you advise me on what to do from here?
EDIT: Nevermind, fixed it. Changed system partition's filesystem to F2FS via TWRP, and this allowed CM and gapps to flash with no issue. Now booted into CM But hopefully this will be helpful if anyone else has this issue
EDIT2: Buuuuut now the WiFi's not working. It just gets stuck at "turn on WiFi" but nothing actually turns on, and the on/off button for WiFi in settings is grayed out. IT NEVER ENDS
CyanogenMod Thread
Reddit Thread
EDIT3:
WiFi and Settings Issue seems to be resolved
I think the problem had something to do with the baseband version
As per Trex's post (http://forum.xda-developers.com/showpost.php?p=69520362&postcount=2), I had to revert back to the OK1 baseband
Now everything seems to work fine
As for TWRP not working and just going to a black screen, I redownloaded it from the TWRP website and it worked fine
So now both TWRP and CM are installed and working, WiFi works, and Settings don't crash.
Now I've encountered an issue where the camera doesn't focus, and I'm wondering if there's still some plastic film on the camera lens, but I've been picking at it and nothing is coming off and I'm afraid of damaging the plastic if I keep trying...
AbuFiraas said:
Just got a Note 4, proceeding with the usual root and installation CyanogenMod ASAP
Everything was going smoothly until the actual flashing of CyanogenMod, whenever I try to flash it, it just gets stuck on "patching system image unconditionally" and doesn't progress beyond that point
Steps I've taken so far:
1) unboxed phone, was running Android 6.0 (I think, maybe 6.0.1)
2) Rooted with Chainfire's Auto Root
3) Flashed TWRP 3.0.2-0 via Odin 3.09 as per TWRP's instructions
4) Ensured that I could boot both to the stock ROM and TWRP
5) Copied cm12.1 and gapps to Note 4's internal storage (sd card hasn't come in yet, normally I put it onto sd card)
6) Did default factory wipe from TWRP
7) Attempted to flash cm12.1, ran into issue
I didn't make a backup of the stock ROM so now the phone has a recovery but no actual OS, as I had to pull the battery out to get it to do anything beyond being stuck at the patching system image step
I'm redownloading cm12.1 in case maybe there was a problem with the .zip itself, I know it's bad practice but I never check md5 sums
I've found other threads that suggested flashing the stock ROM for some reason, but they were for other phones and I'm not sure if it's related to the Note 4.
I've seen some mention of the bootloader being locked, but I don't know how to tell if the bootloader is locked or not. I see the same exact boot screen that I saw with my Note 3, S4, S3, etc. Could the issue be the bootloader?
I've also found this thread, but I can't get TWRP to mount in Windows, it keeps saying the driver failed to install. MTP transfers worked fine with the stock ROM was still there, but for some reason it doesn't work with the Mount option in TWRP. I'm downloading the Android SDK so I can try using adb
If anyone else has run into this, can you advise me on what to do from here?
EDIT: Nevermind, fixed it. Changed system partition's filesystem to F2FS via TWRP, and this allowed CM and gapps to flash with no issue. Now booted into CM But hopefully this will be helpful if anyone else has this issue
EDIT2: Buuuuut now the WiFi's not working. It just gets stuck at "turn on WiFi" but nothing actually turns on, and the on/off button for WiFi in settings is grayed out. IT NEVER ENDS
Click to expand...
Click to collapse
You must flash 5.1.1 ok1 bootloader to get wifi work
I suggest you first flash 5.1.1 firmware in odin
Then flash twrp. Tar file in odin.
Then make full wipe
Flash cm rom + gapps
You will get clean rom install without any errors
Hope this will help
Trex888 said:
You must flash 5.1.1 ok1 bootloader to get wifi work
I suggest you first flash 5.1.1 firmware in odin
Then flash twrp. Tar file in odin.
Then make full wipe
Flash cm rom + gapps
You will get clean rom install without any errors
Hope this will help
Click to expand...
Click to collapse
Okay I'll give that a shot. Are "5.11 ok1 bootloader" and "5.1.1 firmware" the same thing? And do you know where I can find it/them?
Just flashed OK1 via Odin via this thread, but it's just boot looping over and over
EDIT: Did a simple factory wipe and it's working fine now. Currently running unrooted Stock 5.1.1, Baseband N910PVPS4COK1. So I'm basically starting from the beginning, whereas before it was on 6.0 but now it's 5.1.1
Am now rooted but I can't get TWRP installed, I flash it and try to boot to recovery but it just boots to a black screen
Issue seems to be resolved, edited original post
AbuFiraas said:
Okay I'll give that a shot. Are "5.11 ok1 bootloader" and "5.1.1 firmware" the same thing? And do you know where I can find it/them?
Click to expand...
Click to collapse
Go to download mode and check exact model number
Tell me model number and i give you links for bootloader and firmware
Trex888 said:
Go to download mode and check exact model number
Tell me model number and i give you links for bootloader and firmware
Click to expand...
Click to collapse
It's working now, I found another post that had all the various stock firmwares on there. Now the issue I'm having is that my camera doesn't focus at all, but I don't know if it's a hardware or software issue. I never checked the camera before rooting the first time. Gonna try going back to unrooted stock again but if that doesn't change anything, I might have to take it to a Sprint store and get a replacement. Hopefully they don't notice the KNOX trip... lol
So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Thanks a lot guys, that did the trick, and done with flashify
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!
HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...
m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me
This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!
gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..
After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.
Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life