Related
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Did you follow the instructions to flash TWRP using Odin?
olafo73 said:
Did you follow the instructions to flash TWRP using Odin?
Click to expand...
Click to collapse
I'm pretty sure I did everything I was intended to do. I installed Samsung Kies so I could install the drivers on my mobile, and then TWRP through Odin properly with the blue light showing up. After flashing it, it turned green and said PASS or PASSED. So I think I did everything right on that end, I can even access TWRP with no real problems.
I even tried to do a ROOT on my system, but again, I couldn't use ZIP or any other files on the TWRP installation option because they simply do not appear
bump
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
aguycalled80 said:
Watching this thread as I have the same problem.
I can boot to TWRP 2.8.7, but if I try to install, there's no file to install from.
I can go back to TWRP 2.6.0, and then mount the card and see the ROM, but every ROM I try fails. Something about non-virtual partitions if I try 4.4 or better, and error executing updater binary if i try 4.1
Click to expand...
Click to collapse
How did you go back to TWRP 2.6.0?
N1ZUW said:
How did you go back to TWRP 2.6.0?
Click to expand...
Click to collapse
With Odin.
I can boot in download mode no problem.
N1ZUW said:
Good evening everyone!
I've recently wanted to update my Hercules from 4.1 (I know it's reeealy outdated) to version 6.0 Marshmallow.
So I did a few steps and now I cant' seem to go any further, and I need your help.
So far, I've done the following:
-Installed TWRP 2.8.7.0
-Used Odin to flash the TWRP mentioned above
Now, I know there are a few problems regarding this version of the TWRP on the Hercules, so I tried fixing it by using Odin again and flashing the updated 2.8.7.1 and even the 3.0 version that I found on some threads, but with no sucess.
I haven't even had the chance to install Marshmallow on my phone in the first chance, because I couldn't find any .ZIP folders on the TWRP instalation menu.
I really appreciate your help guys, I'm a noob at this and I'm just starting to figure what is what, I just need my phone updated. It's running so far atleast, so it's not hard bricked I guess.
Click to expand...
Click to collapse
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
markusrow said:
I don't know of any problems with any of the recoveries. However there are different recoveries for different roms which need to be used in a specific order and in a specific way, the first time that you virtually repartition your phone.
Have you gone through the process of applying the "virtual partition" and installing the modified "virtual partition" recovery? This is required for most of the MM roms on this phone (Hercules). The process is very well documented here http://forum.xda-developers.com/galaxy-s2-tmobile/help/guidance-sgh-t989-updating-issue-t3414641 in the #2nd post.
Click to expand...
Click to collapse
Hi, thanks for replying
No, I dont' take I have taken that step actually. I'm pretty new to this and I tried following every step correctly, but I know that I failed or skipped something at some extent and I've been trying to figure out what exactly, so I can fix it. I guess I need to Virtual Partition my phone then, could you post me the link do to so? Because I think you posted one that would take back to this post
aguycalled80 said:
With Odin.
I can boot in download mode no problem.
Click to expand...
Click to collapse
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
N1ZUW said:
How do you go in download mode if you have TWRP installed? Does TWRP work as download mode aswell? Thanks for your help man, hope you can fix your phone too!
Click to expand...
Click to collapse
I shut it down in TWRP then hold volume down and power to go into download mode.
My phone has gone backwards now though - it doesn't matter what I load in Odin now, it won't boot up. The SAMSUNG screen is on, with a progress bar, but it never gets to the end. It stops right near the end and it sits there until I reboot it again.
Hello,
I've tried everything that the internet has to offer so far and still can't get the newest version to install on my phone without failing somewhere in the installation process.
I feel like asking for help isn't of much use, because it could be everything.
I tried resetting the phone completely with this guide: http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700
After that I wanted to install the update again, and still no success.
Next time you make a thread regarding an issue be kind enough to tell us the state of your phone to the best of your knowledge, whether its working or not? does it show the oneplus logo or not..... these things matter plenty!
judging from the what you have mentioned in your post, your main issues is not being able to install the latest update.
try these steps
1. download this file https://www.androidfilehost.com/?fid=24591000424945019 [thanks to namman bhalla for his thread, http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870]
2. copy and paste it onto your phone.
3. now boot into your phones recovery twrp preferred
4. from there choose the option which says..... click install new zip. and select the zip that you downloaded....
it should work if it doesn't, give us a detailed description of what and all you have done with your phone whether you have unlocked the bootloader, whether there is a custom recovery installer and most importantly whether you have nandroid backup of your device.
ajaysoranam said:
Next time you make a thread regarding an issue be kind enough to tell us the state of your phone to the best of your knowledge, whether its working or not? does it show the oneplus logo or not..... these things matter plenty!
judging from the what you have mentioned in your post, your main issues is not being able to install the latest update.
try these steps
1. download this file https://www.androidfilehost.com/?fid=24591000424945019 [thanks to namman bhalla for his thread, http://forum.xda-developers.com/oneplus-3/how-to/mirrors-official-oxygen-os-roms-ota-t3410870]
2. copy and paste it onto your phone.
3. now boot into your phones recovery twrp preferred
4. from there choose the option which says..... click install new zip. and select the zip that you downloaded....
it should work if it doesn't, give us a detailed description of what and all you have done with your phone whether you have unlocked the bootloader, whether there is a custom recovery installer and most importantly whether you have nandroid backup of your device.
Click to expand...
Click to collapse
I tried using that method and it failed, I can get into recovery just fine and my bootloader is unlocked because I flashed twrp
I have a backup I made in twrp.
I got the official support tool (MsMDownloadTool) and I could restore my phone to 3.1.2 but it still crashes apps and is very unstable.
If I now try to install the update again, or try to flash the full OxygenOS 3.2.1 or 3.1.2 I get the Error 7 ("system partition has unexpected contents").
I dont get this error because the system partition couldnt have been modified, because I didnt even start the phone , I just got into recovery and tried updating it.
I'm losing my mind on this.
Sorry if that was a ramble and isn't understandable
calm down!
boot into twrp, wipe system ,data, cache, dalvik. now try flashing the latest full rom i.e. 3.2.2.
try this and let me know....
if it didn't work give me step by breakdown of what you did.....
DeadlyVirez said:
I tried using that method and it failed, I can get into recovery just fine and my bootloader is unlocked because I flashed twrp
I have a backup I made in twrp.
I got the official support tool (MsMDownloadTool) and I could restore my phone to 3.1.2 but it still crashes apps and is very unstable.
If I now try to install the update again, or try to flash the full OxygenOS 3.2.1 or 3.1.2 I get the Error 7 ("system partition has unexpected contents").
I dont get this error because the system partition couldnt have been modified, because I didnt even start the phone , I just got into recovery and tried updating it.
I'm losing my mind on this.
Sorry if that was a ramble and isn't understandable
Click to expand...
Click to collapse
So as the title says, after flashing cm14. 1 can't go into recovery anymore, it just a black screen. I tried to use flashify but nothing, a couple of apps show that I have twrp 3.0.2.1 but can't get into it... Help?
Cheers
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Which thread is this from please?
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Yeah man im in the same boat, if i get time ill try this twrp recovery. Where did that recovery come from?, it seems like the CM recovery for 14.1 nightly high jacks the recovery partition (i call it that,i dont know the term for it)
Sent from my ONEPLUS A3000 using Tapatalk
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Hw4ng3r said:
I believe the official 14.1 nightlies are based on the CB which requires the modified TWRP, which is what @JKMB888 has linked you to.
Click to expand...
Click to collapse
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Thanks a lot guys, that did the trick, and done with flashify
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
@JKMB888 it does work 100% is as simple as flashing the TWRP. Actually, i installed it with CM 14.1 running just fine
Sent from my ONEPLUS A3000 using Tapatalk
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Edit: I found the solution, i had a pattern lock screen and i removed it!
HC4Life said:
Why i have always mount decrypt data when i boot in recovery mode which is TWRP 3.0.2-22 aand ask me to input a password?
Click to expand...
Click to collapse
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
GrandMasterB said:
At some point your phone data became encrypted. While booted up if you search for encrypt in settings you'll see your phone is encrypted.
Same thing happened to me yesterday after flashing 3.2.7 and booting up for the first time before going back to TWRP to flash AICP. Only way to decrypt permanently, as far as I know, is to wipe all data including internal and completely start from scratch.
Click to expand...
Click to collapse
Look at my edited reply...
m4manusraj said:
Just re flash the TWRP image via Fastboot. Apps like flashify actually use TWRP or whatever recovery installed to flash image file AFAIK. I recommend using modified TWRP,Flashing some roms break the access. But the modified one can withstand almost every new rom installs.
Hope it helps.
Click to expand...
Click to collapse
actually flashify did the trick for me as I had no access to a pc for the time
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
JKMB888 said:
I would like to truly confirm that the direct link to recovery, along with the thread in which it can be found, repair the situation. I was able to restore the backup of Freedom OS and the return to CM14.1 backup. We should keep this one somewhere near, jsut in case.
Click to expand...
Click to collapse
i am facing just the same situation with cm14.1 nightly and can't boot into recovery
i tried flashing the recovery image provided by you i.e. twrp-3.0.2-22-oneplus3.img but i face the same problem again
when i go into the recovery all i see is a black screen with a white notification light on and it remains there untill i switch off my phone manually using the power button
i tried facing the problem when i installed the cm14.1 nightly
i was unable to login snapchat as i device was rooted as said by the message on snapchat
so i decided to unroot my device via supersu FULL UNROOT option
after a reboot i successfully logged into snapchat
then i tried to root it again
i went into recovery to flash the supersu zip
and since then i have been unable to see the twrp recovey
please help me
This thread is a life save. Tried everything and it drove me nuts not getting into recovery.
THANK YOU!
gangangan2 said:
http://forum.xda-developers.com/one...nity-build-t3461648/post68691560#post68691560
Flash this recovery. Fixed the problem for me
Click to expand...
Click to collapse
Thank you so much it's work for me now..
After I got the recovery back, I flashed CM13 again and ARM64 6.0 Nano Gapps for my Oneplus 3, but I'm getting an error after the "preparing apps' screen is loaded saying that - unfortunately the process android.process.media has stopped one plus 3 boot and then the phone switches off.
Any solution to this? I've already tried flashing different versions of CM13.
Thank you!! I was looking for hours.
This link fixed the problem!
JKMB888 said:
Same situation here. Neither booting the recovery via fastboot without flashing nor flashing the TWRP an then booting into it result in black screen. Flashify gives no results here. Please help.
EDIT; flashing this one via fastboot restores the access to TWRP, confirming it right now. http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Click to expand...
Click to collapse
Hey, guys. I'm pretty sure I bricked my phone and there's no way to get out.
So I was on CM13 official builds on my OP3. Then, on the OTA update system they have, I got moved onto the CM14.1. I downloaded from here and went into my twrp recovery to flash. I made a clean flash and then proceeded to go back to system. I thought everything was ok until I realised I hadn't flashed a gapps package which I pretty much need to survive as all my contacts backups etc. are on there. I powered off my phone and went to go back into the recovery after downloading gapps 7.1 micro. It went past the *You're device can not be trusted'* and then went to the oneplus screen. After that, it stayed like that for about 30 secs and powered off. At first, I thought I messed something up and tried again. I repeated that for about 3 times and it didn't work. I tried going into the normal system and coming back to recovery and it didn't work still. In fact, now I can't even get into system. Now, i can only boot up to fastboot, where my computer still doesn't realise my phone is plugged in.
Anyone got any ideas on how to fix this? I wouldn't say I'm a noob at this because I have flashed many times before but I'm relatively new to the scene. I didn't see this thread before i ripped my hair out and i think wrecked my phone @JKMB888
EDIT: I sorted it out with help from Naman Bhalla's unbrick thread and this. A certain combo works and now I'm on CM14.1 enjoying life
Hi guys,
As soon as I got the OP3 in July, I somehow managed to successfully perform all the steps to get it rooted. I was running OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
OnePlus has been showing me a "new version available" since September, but I very patiently and calmly didn't install it OTA because I didn't want to lose the root.
Finally had a bit of time today, decided I'd finally upgrade. Looked around for the "most recent stable version" and picked this one: OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
Followed the steps for flashing using TWRP (twrp-3.0.2-1.28-oneplus3) here:
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
It worked. Yay. Then (god dammit **** ****) I still saw this "new version available" and couldn't swipe it away... I accidentally clicked it and it downloaded the OTA. Fine.
Now I'm stuck in a TWRP boot loop. I tried re-installing the OTA_035.zip from TWRP -- I tried restoring my Nandroid Backup (only had enough room to save "Boot / Recovery / System" partitions, NOT data) -- and I tried ADB Sideloading 16_OTA_013.zip.
I'm stuck rebooting in TWRP 3.0.2-1.
Is there anything I can try before going ballistic and wiping my data?
Thanks.
Marc
Have you tried the newest blu-spark twrp? https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Puddi_Puddin said:
Have you tried the newest blu-spark twrp? https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Click to expand...
Click to collapse
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Zingapuro said:
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Click to expand...
Click to collapse
After you've flashed the full zip, flash also the latest stable version of SuperSu (2.79) and latest TWRP from @eng.stk (the v11, it solves the dm-verity error). Then reboot to recovery, it should appear TWRP and the error should't appear.
Zingapuro said:
Hey Puddi_Puddin, thanks for replying.
I never heard of blu-spark, but gave it a shot. Even though the guide seems to apply only to OP3T: https://forums.oneplus.net/threads/...-or-custom-recovery-without-data-loss.479265/
Anyways I flashed blu-spark with ADB. Booted into blu-spark. Wiped Dalvik/Cache, re-installed OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip, wiped Dalvik/Cache, rebooted -- keeps booting into blu-spark TWRP.
Get the "device unlocked" error screen, then the dm-verity error screen, then the OnePlus logo for about 2 seconds, and then back to blu-spark. Repeat ad nauseum.
What state is my device even in? I wouldn't call it bricked... I assume it's still rooted, bootloader works, I can flash different TWRP versions, ...
Any other ideas ... ?
Click to expand...
Click to collapse
There are quite a few versions of TWRP from eng.stk (bluspark). Which one did you install? Try version 11 which is supposedly for N or 3.0.2-19 or 23.
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Zingapuro said:
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Click to expand...
Click to collapse
Try the other two given by me.
Zingapuro said:
Thanks for your help everyone.
I downloaded SuperSU-v2.79 here http://downloadmirror.co/Utz/UPDATE-SuperSU-v2.79-20161211114519.zip
I flashed both ZIPs OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2 and UPDATE-SuperSU-v2.79-20161211114519.zip
I confirm I'm using twrp-3.0.2-0_blu_spark_v11-op3.img (from the link provided by Puddi_Puddin)
Still see dm-verity error ... still keeps booting into blu_spark TWRP. :crying:
Click to expand...
Click to collapse
From where have you dowloaded the OTA? XDA or OnePlus forum?
I saw a thread regarding the OnePlus 3T update some post above, if you've downloaded from there you've made a mistake if you own a OnePlus 3.
tnsmani said:
Try the other two given by me.
Click to expand...
Click to collapse
You mean 3.0.2-19 or 23. Not blu_spark, right? Ok I tried twrp-3.0.2-23-oneplus3.img from here (https://www.androidfilehost.com/?fid=529152257862684308)
I tried flashing my old images I used last year (I just wanted the phone to boot into *something*) Oxygen_16_OTA_013 & SuperSU-v2.74. Managed to boot. Updated 4 Apps (??) But as soon as the login screen came up, it would reboot ... and keep looping. So I couldn't use the phone, but at least I managed to boot into something other than TWRP.
Next I tried to reinstall OOS4, 16_OTA_035 with SuperSU-v2.79 SR2. Still get the verity error, but at least I managed to boot! But - the phone is *super* buggy/unusable... SIM cards aren't working - I can't access my options screen - and "Developer options are not available for this user".
Now from my "About" screen I have OOS 4.0, Android 7.0, Kernel version 3.18.31-perf+ [email protected] <-- (that's from my TWRP version. right?)
Did the OTA I install from OnePlus directly screw everything up? For that brief moment before I installed it, I tasted a seemingly properly working OOS 4, so I know it's possible...
A few lessons I've learned are -- I can use any recovery (TWRP) to use MTP and flash files and stuff... but in order for the phone to work properly, I have to a) flash the SuperSU (not just the ROM) and b) make sure I have the "correct/proper" TWRP (kernel?) matched with each ROM. Is that kind of right? That's where I'm stuck I guess.
let92 said:
From where have you dowloaded the OTA? XDA or OnePlus forum?
I saw a thread regarding the OnePlus 3T update some post above, if you've downloaded from there you've made a mistake if you own a OnePlus 3.
Click to expand...
Click to collapse
I downloaded from here
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
I'm sure I'm making a ton of mistakes -- that's why I'm here
(I read here https://forum.xda-developers.com/on...mple-trick-t3530685/post70415499#post70415499 that .28 shouldn't be used)
This post mentions a procedure to get rid of verity https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
I'm currently backing up my data, and I'll attempt to follow these instructions to switch to f2fs (hopefully get rid of the verity error) and install OxygenOS 4.0.1 (http://otafsc.h2os.com/patch/amazon...n_16_OTA_037_all_1701041839_aa64b084a40a4.zip)
I'm also a bit confused about the best version of SuperSU-v2.79 to use, because blu_spark was writing somewhere (can't find where) that SR1 and SR2 were the cause of battery issues ... So yeah, I've got other things to try, but should the ROM from OOS4.0.1 work with any of them?
THANKS.
Zingapuro said:
You mean 3.0.2-19 or 23. Not blu_spark, right? Ok I tried twrp-3.0.2-23-oneplus3.img from here (https://www.androidfilehost.com/?fid=529152257862684308)
I tried flashing my old images I used last year (I just wanted the phone to boot into *something*) Oxygen_16_OTA_013 & SuperSU-v2.74. Managed to boot. Updated 4 Apps (??) But as soon as the login screen came up, it would reboot ... and keep looping. So I couldn't use the phone, but at least I managed to boot into something other than TWRP.
Next I tried to reinstall OOS4, 16_OTA_035 with SuperSU-v2.79 SR2. Still get the verity error, but at least I managed to boot! But - the phone is *super* buggy/unusable... SIM cards aren't working - I can't access my options screen - and "Developer options are not available for this user".
Now from my "About" screen I have OOS 4.0, Android 7.0, Kernel version 3.18.31-perf+ [email protected] <-- (that's from my TWRP version. right?)
Did the OTA I install from OnePlus directly screw everything up? For that brief moment before I installed it, I tasted a seemingly properly working OOS 4, so I know it's possible...
A few lessons I've learned are -- I can use any recovery (TWRP) to use MTP and flash files and stuff... but in order for the phone to work properly, I have to a) flash the SuperSU (not just the ROM) and b) make sure I have the "correct/proper" TWRP (kernel?) matched with each ROM. Is that kind of right? That's where I'm stuck I guess.
I downloaded from here
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
I'm sure I'm making a ton of mistakes -- that's why I'm here
(I read here https://forum.xda-developers.com/on...mple-trick-t3530685/post70415499#post70415499 that .28 shouldn't be used)
This post mentions a procedure to get rid of verity https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
I'm currently backing up my data, and I'll attempt to follow these instructions to switch to f2fs (hopefully get rid of the verity error) and install OxygenOS 4.0.1 (http://otafsc.h2os.com/patch/amazon...n_16_OTA_037_all_1701041839_aa64b084a40a4.zip)
I'm also a bit confused about the best version of SuperSU-v2.79 to use, because blu_spark was writing somewhere (can't find where) that SR1 and SR2 were the cause of battery issues ... So yeah, I've got other things to try, but should the ROM from OOS4.0.1 work with any of them?
THANKS.
Click to expand...
Click to collapse
Unfortunately I haven't tried to update the phone yet, so I don't know what else you can do. But you can also follow the guide posted by @Viper The Ripper here:
https://forum.xda-developers.com/showpost.php?p=70499899&postcount=5
I think that it's simpler and I'll follow that one this weekend when trying to updating my phone
Zingapuro said:
Hi guys,
As soon as I got the OP3 in July, I somehow managed to successfully perform all the steps to get it rooted. I was running OnePlus3Oxygen_16_OTA_013_all_1608061823_765c081a5c8e4dad.zip
OnePlus has been showing me a "new version available" since September, but I very patiently and calmly didn't install it OTA because I didn't want to lose the root.
Finally had a bit of time today, decided I'd finally upgrade. Looked around for the "most recent stable version" and picked this one: OnePlus3Oxygen_16_OTA_035_all_1612310359_e10cadfb2af7.zip
Followed the steps for flashing using TWRP (twrp-3.0.2-1.28-oneplus3) here:
https://forum.xda-developers.com/oneplus-3/how-to/oxygenos-4-0-android-nougut-official-t3529684
It worked. Yay. Then (god dammit **** ****) I still saw this "new version available" and couldn't swipe it away... I accidentally clicked it and it downloaded the OTA. Fine.
Now I'm stuck in a TWRP boot loop. I tried re-installing the OTA_035.zip from TWRP -- I tried restoring my Nandroid Backup (only had enough room to save "Boot / Recovery / System" partitions, NOT data) -- and I tried ADB Sideloading 16_OTA_013.zip.
I'm stuck rebooting in TWRP 3.0.2-1.
Is there anything I can try before going ballistic and wiping my data?
Thanks.
Marc
Click to expand...
Click to collapse
In my opinion, the only thing you can try is to make a data backup from recovery to any external storage (like a pendrive) by Otg, but it takes some risks. In case this partition has been damaged, you can get issues when you install the rom.
The safest you can do is clean installation in spite of you lose data so, full wipes and a new full rom.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
You have to install stock recovery, and then reboot into recovery, you will have a instalation error, reboot and loop solved Then, you can flash your twrp and su without loosing data
I discovered following this threath desesperate and going to do a clean install, dowload the files and try to do it steap by steap: https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
Good luck :good:
P.D.: I have formated system partition, so I lost the android configuration
satisastur said:
You have to install stock recovery, and then reboot into recovery, you will have a instalation error, reboot and loop solved Then, you can flash your twrp and su without loosing data
I discovered following this threath desesperate and going to do a clean install, dowload the files and try to do it steap by steap: https://forum.xda-developers.com/oneplus-3/how-to/fix-device-mapper-verity-simple-trick-t3530685
P.D.: I have formated system partition, so I lost the android configuration
Click to expand...
Click to collapse
Hey Satisastur,
Thanks for taking the time to comment. Yes, actually that's exactly the guide I wanted to follow. But I'm stuck before even starting -- if I make Nandroid Backup now (in ext4) I can't load it back once filesystem changes to f2fs -- isn't that right?
(I also asked the question in that thread: https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page8#post70525818 )
And uh... sorry... what exactly do you mean "android configuration"... like ringtones and stuff?
Zingapuro said:
Hey Satisastur,
Thanks for taking the time to comment. Yes, actually that's exactly the guide I wanted to follow. But I'm stuck before even starting -- if I make Nandroid Backup now (in ext4) I can't load it back once filesystem changes to f2fs -- isn't that right?
(I also asked the question in that thread: https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page8#post70525818 )
And uh... sorry... what exactly do you mean "android configuration"... like ringtones and stuff?
Click to expand...
Click to collapse
Yes, I was on f2fs before this happens, so I only have to install all without formating data. You should do a manual backup to do that, once on recovery, you be able to enter phone data partition from windows. Copy all folders you want to save before formating to f2fs in recovery. Other setup and configuration like ringtones and stuff, all cache and configuration of apps, wallpaper, led, colors and themes... you will lost it. I don't know how to backup that, but its the worst part of formating data... google backup doesn't save all the config
You will start with the android phone start menu, like new, with new dactilar and patron security, etc...
@Zingapuro
Try TWRP 3.0.2_19 and Supersu 2.79 stable. For some people this works and according to eng. stk, only Supersu 2.79 stable is compatible with N.
tnsmani said:
Try TWRP 3.0.2_19 and Supersu 2.79 stable. For some people this works and according to eng. stk, only Supersu 2.79 stable is compatible with N.
Click to expand...
Click to collapse
Tried flashing twrp-3.0.2-19-oneplus3.img and from TWRP installing:
OnePlus3Oxygen_16_OTA_037_all_1701041839_aa64b084a40a4.zip
UPDATE-SuperSU-v2.79-20161211114519.zip
Same issues as described above: boots into 4.0.1, but buggy, SIM cards don't work, no Dev options, etc...
satisastur said:
Copy all folders you want to save before formating to f2fs in recovery.
Click to expand...
Click to collapse
Yeah, I have a feeling this is my only choice. This is the next thing I'll try.
Zingapuro said:
Tried flashing twrp-3.0.2-19-oneplus3.img and from TWRP installing:
OnePlus3Oxygen_16_OTA_037_all_1701041839_aa64b084a40a4.zip
UPDATE-SuperSU-v2.79-20161211114519.zip
Same issues as described above: boots into 4.0.1, but buggy, SIM cards don't work, no Dev options, etc...
Yeah, I have a feeling this is my only choice. This is the next thing I'll try.
Click to expand...
Click to collapse
Try this guide: https://forum.xda-developers.com/oneplus-3/how-to/guide-flashing-oos-v4-0-1-custom-rom-t3537757
It will fix most of your issues.
For going back to full stock use this guide: https://forums.oneplus.net/threads/guide-how-to-unroot-your-oneplus-3-and-go-back-completely-to-stock.456232/
I hope everything will go back to normal.
Hi everyone,
Just want to update that my phone is back up and running. Thanks for your all your help.
More details here:
https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page9#post70588707
Is there any way to update this thread to [SOLVED] ?
Zingapuro said:
Hi everyone,
Just want to update that my phone is back up and running. Thanks for your all your help.
More details here:
https://forum.xda-developers.com/on...rity-simple-trick-t3530685/page9#post70588707
Is there any way to update this thread to [SOLVED] ?
Click to expand...
Click to collapse
Great!
I think you can edit the thread title
Boot into your recovery [Vol+ and Power]
Connect your phone to your PC
Execute the following fastboot command on your PC (More informations on fastboot)
Code:
fastboot continue
Your phone will start right away. :good:
Hi,
Googled a while and looked around in the forum but did not find anyone with the exact same issue as me so here goes.
Maybe someone could tell me where exactly I am doing wrong.
I have a LG Nexus 5X, latest Oreo 8.1 official update.
I want to install a custom kernel to improve performance and/or battery life.
Never rooted or anything like that so I googled around to know what to do.
So I unlocked the bootloader and flashed the latest TWRP custom recovery (v3.2.1-0).
The first strange thing unlike what I kept reading in tutorials and forums is that, although I did reboot directly into recovery after flashing TWRP, and completed flashing TWRP using its interface, I was never able to reboot into TWRP unless I flashed it again. As if TWRP could not avoid being overridden by the stock recovery. So to get back to TWRP I always have to:
reboot into the bootloader: adb reboot bootloader
flash TWRP: flash recovery twrp-3.2.1-0-bullhead.img
reboot bootloader: fastboot reboot
immediately start into to bootloader (power + vol down)
choose 'Recovery Mode' from there
Which seemed odd, that TWRP wouldn't 'stick', although I was not root yet.
Which gets me to the second part. All I wanted was to root my phone.
So after not finding a consistent way to do it - it seemed every website I visited gave me slightly different instructions to do so, I took the chance and did the following:
download latest SuperSU flashable zip file (v2.82) and copy it to internal storage
go through the process I describe in the list above to get into TWRP
install SuperSU zip file (via Install TWRP option, logs seemed ok, warned me it would take a while to boot again)
reboot, wait until it boots
But the phone got stuck in the boot screen - OS does not start to load - for at least half an hour.
Luckily, probably because the OS did not load, TWRP was not overridden and so I have access to it.
My main problem at this point is that, as a newbie on this, I am not sure what can I do in TWRP to try to restore the OS.
I have tried to restore a Nandroid backup I performed before all this, and also tried to Wipe Data / Cache and Dalvik.
Both did not work - OS still won't load.
What can I do at this point? Wipe System partition? Wouldn't that delete my Nandroid backup?
Maybe 'sideload' (not sure if the right term) an official google image for my Nexus?
Sorry again if questions like this can be easily found around the forum, but from the threads I checked I did not bump into the exact same scenario...
Thank you in advance
So in the meantime I have wiped system partition, no success either.
Ended up restoring my Nandroid backup and sideloading the latest OTA from Google, which successfully restored my phone.
Of course TWRP was overridden once again.
So back to the start: can anybody help me out on the best way to permanently flash TWRP and root the phone?
Thanks!
Forget SuperSU - Use Magisk to root your phone. As for TWRP getting overwritten - any time you take an update from Google, it will generally (if not always) restore the stock recovery. The way to get around that is to download the entire current update from Google and then use fastboot to flash the individual parts (system.img / boot.img / radio.img / vendor.img)
jbaumert said:
Forget SuperSU - Use Magisk to root your phone. As for TWRP getting overwritten - any time you take an update from Google, it will generally (if not always) restore the stock recovery. The way to get around that is to download the entire current update from Google and then use fastboot to flash the individual parts (system.img / boot.img / radio.img / vendor.img)
Click to expand...
Click to collapse
Well yes, the last time I expected TWRP to be gone since I have applied the whole image, and I wouldn't expect otherwise. My problem is that TWRP is always getting overridden each time I reboot my phone. Do you have any idea why?
Regarding Magisk, I will look around to see how to use it. Could you point me in the right direction?
Also I think I read somewhere that the kernel I wanted to flash in the end - Franco's Kernel - required SuperSU and did not work with Magisk. Am I wrong?
disacrol said:
Well yes, the last time I expected TWRP to be gone since I have applied the whole image, and I wouldn't expect otherwise. My problem is that TWRP is always getting overridden each time I reboot my phone. Do you have any idea why?
Regarding Magisk, I will look around to see how to use it. Could you point me in the right direction?
Also I think I read somewhere that the kernel I wanted to flash in the end - Franco's Kernel - required SuperSU and did not work with Magisk. Am I wrong?
Click to expand...
Click to collapse
Here's the guide stickied that should walk you through the TWRP install. https://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930
Just curious you are using "fastboot flash recovery ....." and not "fastboot boot recovery...."? The "boot" method doesn't do the install.
As for Magisk. There is a whole forum dedicated to it - https://forum.xda-developers.com/apps/magisk - Short story install the latest stable version (16.0) and call it good. I haven't had any issues with recent kernel builds including Franco, EX, etc.... One thing to keep in mind is that Magisk always gets flashed after the kernel install as it does some patching of the boot.img as part of its process.
jbaumert said:
Just curious you are using "fastboot flash recovery ....." and not "fastboot boot recovery...."? The "boot" method doesn't do the install.
Click to expand...
Click to collapse
Yes, flash, not boot.
Thanks a bunch for all your help. I didn't meant to be lazy to start by reading sticked topics, but it's so much new information for a newbie that I didn't exactly know where to start. Thanks again for sharing the links.
I'm not sure if you got this fixed. But if not, first fastboot boot twrp. Then flash supersu or magisk. Then boot back into the bootloader from twrp and fastboot flash twrp. That'll solve the problem.
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
I'm not sure if you got this fixed. But if not, first fastboot boot twrp. Then flash supersu or magisk. Then boot back into the bootloader from twrp and fastboot flash twrp. That'll solve the problem.
Click to expand...
Click to collapse
I tried that but I'm getting no luck with SuperSU, always gets me in a bootloop (actually, technically not a loop since it remains Frozen with the Google logo)
I'll give magisk a try and come back with feedback. Maybe it has something to do SuperSU incompatibility with Oreo 8.1..
disacrol said:
I tried that but I'm getting no luck with SuperSU, always gets me in a bootloop (actually, technically not a loop since it remains Frozen with the Google logo)
I'll give magisk a try and come back with feedback. Maybe it has something to do SuperSU incompatibility with Oreo 8.1..
Click to expand...
Click to collapse
What version of super su are you using? Use 2.82 SR 3 or 5
Sent from my [device_name] using XDA-Developers Legacy app
jd1639 said:
What version of super su are you using? Use 2.82 SR 3 or 5
Click to expand...
Click to collapse
V2.82 Stable, not Service Release. Is the last stable not compatible with Oreo? Official website is not specific about it, so I just assumed it was ok.
disacrol said:
V2.82 Stable, not Service Release. Is the last stable not compatible with Oreo? Official website is not specific about it, so I just assumed it was ok.
Click to expand...
Click to collapse
3 or 5 work on Oreo. I'm not sure about stable. I don't use it.
Sent from my [device_name] using XDA-Developers Legacy app
SR5 worked like a charm. I just wish there was a compatibility matrix somewhere in their website to avoid so many forum threads and misinformation on the subject and avoid all the hustle. The whole process is dead simple but it took me days and tailored help from you guys to figure this one out.
Thanks again to all of you for your assistance.
i had that issue with a nex 6 and flashing supersu fixed it. when i got a 6p i tried the same and get stuck on the boot logo and had to sideload factory firmware to get back to go. i have a 5x on the way maybe i will try magisk.
so after i flash twrp reboot the bootloader, i open twrp and flash supersu sr5 and all is well, no more disappearing act for twrp and no more stuck on the "google"?