Related
Im looking for a <6in microUSB cord to go in my bag with my netbook bc i dont need a 3ft cable when im sitting next to my phone. any ideas?
also does anyone have one of these? http://amzn.to/b3wCIx its close to what i want but looks like the micro end would be too big to fit, looking for confirmation b4 i buy it.
I would think it would fit. I do however have a small recoiling USB cord that came with a charger I bought for my Blackberry that works well.
~T.J.
EDIT: Found this just now after someone linked to this site for something else. Never used the site, but they appear to have something close to what you're looking for. Says its only a foot long for $5.
http://www.amzer.com/Universal-Micr...c-and-Charge-Handy-Small-Cable-1ft-P82928.htm
Heres a sample of the retractable one I have
http://www.amzer.com/Amzer-Micro-USB-Retractable-Data-Cable-P82268.htm
Amazon also has a 1 foot cable
http://amzn.com/B003DKX06K
Id say a foot is about as short as you can find aside from that curly thing or a retractable.
i'm using one of this.
1 end is regular usb 2.0, the other end is microusb and/or miniusb.
http://www.amazon.com/gp/product/B003554F80/ref=ord_cart_shr?ie=UTF8&m=ATVPDKIKX0DER
I purchased my micro USB cables from Monoprice.com. I believe they have lengths down to 1.5'. These cables are SUPER cheap, like $1.50 or something like that.
I had to mod the micro ends of the cables to make them fit the bevel on the Captivate.
Sent from my SAMSUNG-SGH-I897 using XDA App
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
All you need is a standard MicroUSB to USB cable. Make sure it's a standard cable, and not a "charge only" cable though.
A bit of advise, generally if you buy a cable that isn't a Samsung USB cable, you're going to have to take a razor blade to your new cable and cut away some of the rubber around the MicroUSB plug. You'll see that untrimmed, you might have a hard time getting the cable secured in the phone's port.
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
All it takes is a razor blade or something similar, and a few seconds. I use a bunch of generic USB cables which all have fat plug heads. Trimming a little of the rubber off and they all work perfect.
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
i bought a blackberry cable from best buy... data and charging... 16 bucks. but when ever your puppy ate your data cable in the middle of the night and you're phone is at 30% battery, ya tend to pay for it...
Inexpensive replacement OEM Charger + USB Cable for Captivate SGH-i897!
4got2g0 said:
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
Check out www all4cellular DOT com
They have the OEM Samsung Captivate (U.S./Edison) Wall Charger and USB Charging+Data Cable for $6.95 + $2 Shipping.
The item number is "eta0u60jbe". But this item # includes BOTH the USB Wall Charger (# ETA0U60JBE) AND the USB-to-Micro USB data/charging Cable (# ECC1DU2BBE)!
I bought two of these and they are EXACTLY like the original Charger and ~5ft. USB Cable that comes with the Captivate. They are OEM/Samsung-branded and labeled and are not Chinese-made knock-offs. I am in SoCal and received them within a few days of ordering.
Here's a direct link:
www DOT all4cellular DOT com / samsung-eta0u60jbe-wall-charger DOT html
Hope this helps!
Billy B.
^^^ spam!!!
monoprice .com is better!
foofiebeast said:
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
Click to expand...
Click to collapse
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
I second the Monoprice.com recommendation. I buy ALL my cables there. The heads on their micro USB cables are too large to plug into the Captivate unmodified, but I used a Dremel to fix that.
Both of my Monoprice cables are going strong, in contrast with my OEM cable, which started out excellent, but is now so loose as to not maintain a connection unless the phone and cable are precisely arranged.
Sent from my SAMSUNG-SGH-I897 using XDA App
4got2g0 said:
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
cant hyperlink yet. I ordered 2 of these, they are good and from samsung. on sale at the moment
amazon.com/Samsung-Replacement-Charging-SPH-M330-SCH-R100/dp/B001XXUOQI/ref=sr_1_1?ie=UTF8&qid=1293013918&sr=8-1
USB cables always wear out eventually especially as much as we use them. i just accidentally bought the crappy charge only one now i need to go get a data one
Samsung Captivate Data Cable
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
lee_bruice said:
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
Click to expand...
Click to collapse
That is indeed the one he needs.
I Am Grad That Is Useful.
Happy New Year!!!
tchan012 said:
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
Click to expand...
Click to collapse
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Jmurph3 said:
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Click to expand...
Click to collapse
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
jayrod88 said:
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
Click to expand...
Click to collapse
I have a 1009 model. Assuming that means it was manufactured Sept,2010. Now to find a microUSB
We have some micro USB 5' Cables coming in Monday. If they are like the sample they not only fit the Captivate properly, but when plugged into our new Car Plug ->USB (2100mA) adapter, my Captivate shows "Charging (AC) ".
We originally brought in the Hi-Power USB car adapter so iPad & Tablet customers could both run & charge at the same time. We have had enough request from customers looking to use it with Smart Phones, that I had to find the best matching cable.
Sent from my Samsung Captivate with Perception 10.2, Firebird2 v0.4 #49 Kernel, Firmware 2.2.1, Modem T959TLJL3 using XDA App
Monoprice...ALWAYS!!
As mentioned, get your cables from monoprice. I mean, you just can't beat a usb cable for $2. If it needs trimmed, I usually just use a razor knife/box cutter to remove the bulk, and it works perfectly. I actually had to order a 25ft. VGA cable from them a couple of days ago...$8. Seriously. Definitely the cheapest place I've seen to buy cables.
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
I'm also having this issue. I wonder why...
foofiebeast said:
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
Click to expand...
Click to collapse
Yes, this is exactly what I have to do for mine to charge. So I guess I'll have to just start looking for one that will work for me. It seems just any other standard micro USB cable will do the trick. Thanks a lot my friend.
jayrod88 said:
I'm also having this issue. I wonder why...
Click to expand...
Click to collapse
Well upon further inspection, you can see how the top of the phone is curved and if you look at with the USB door open from the top and tilted slightly back you can see how the jack actually looks crooked inside the phone. I'm quite sure that this is because of the curved top parallel to the circuit board that has the jack is too tall. And I think for some reason I might need to trim down the micro end a bit on the front side..it looks like its hitting the front side of the phone.
I'm looking for a replacement cable as well...even OEM is fine. The case around mine cracked off one night when I feel asleep playing on my phone. Mine was always kind of loose compared to the att charging cable which is nice and tight. Does radio shack carry cables like this?
Sent from my SAMSUNG-SGH-I897 using XDA App
i called AT&T about this with my cappy and they said that the charging port was bad and sent me a new phone , thats been 3 mo ago and the problem hasnt recurred.
(just a thought)
Search Amazon for "blackberry usb cable micro usb". The first result should be it, it's a very high quality, shielded cable. To get a solid, snug fit I suggest a razor or a knife to easily cut back some of the rubber around the micro tip. Works amazingly well. I could even make it work before I trimmed it.
just to elaborate, the specific micro end is called a "micro b " usb connection.
not to be confused with mini or micro a
of course the other end is just standard.
The place I work has a 5' nice quality cable that fits my Captivate tight. They got them to go with the 2100mA USB Car Charger we sell. Cost on the cable is $ 4.99 plus shipping (about $2.99 first class parcel).
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I'm not sure if its quality, or just chance, but I've found that only some 3rd-party cables will work. I've tried a blackberry one that didn't work, and a really cheap one that did.
I would suggest keeping the one you got from samsung, just in case.
I'd like to know if anyone else had issues with cables not working?
I got a Samsung cable designed for the galaxy S on Amazon for like $6 with free shipping.
Sent from my SAMSUNG-SGH-I897 using XDA App
Jmurph3 said:
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem.
I used some tools(hammer,knife, etc) to fix the cable.
Now my cable works fine!!
Sent from my phone
I just used a razor blade to trim the rubber back, works great.
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
bluemoon1221 said:
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
Click to expand...
Click to collapse
You should saved me from buying 3 more cables. I distroyed my OEM cable to make a jig because I bricked my phone. I ordered 3 sets of cables and they all had the same problem.... Usb kept popping off. So I was just about to go out and order 3 more sets if cables, this time OEM untill I decided to read this tread. It never occured to me that it was fitting in well because of the extra rubber on the connector. I trimmed it down and now the cable snapped in perfectly like it was supposed to. Thanks for the fix!
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm afraid of buying the wrong cable off Amazon. There is so much out there. Can anyone post a link?
[email protected] said:
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
Click to expand...
Click to collapse
I know this is getting old, but it took me about 2 hours to find an answer that WASN'T recommending to just make sure the slider was all the way open. For no reason at all, my phone cable just wouldn't hold a real connection this morning... your answer saved the day
For cables that are good quality and cheap, go to www.meritline.com ....... I have never gotten a bad cable from them, typically I use their HDMI cables but the USB cables are less complex and work just as well. My last usb cable was one of theirs.
I was browsing around on ebay and found a multimedia dock for our beloved TB's. Its deff not the highest quality dock i have ever seen, but it looks like a viable replacement until Verizon or HTCpedia release the official one. It doesnt look like it is slanted slightly to have a nice viewing angle but still its $30...the one from Verizon is $60. Let me know what you guys think.
http://cgi.ebay.com/USB-Sync-Battery-Charger-Cradle-HTC-Thunderbolt-4G-/380333733043?pt=PDA_Accessories&hash=item588da834b3
That one has been available for a little while now. There is a thread where someone has a link for it cheaper also. I'm holding out for the Verizon one.
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
halopower said:
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
Click to expand...
Click to collapse
aw really? i wanted to get this only for charging purposes but whats the point if it doesnt charge
Bah, Noob with first smartphone here! I failed to read any replies, and jumped at the deal, and even ordered the silicon soft case from the same guy.
I want to plug the phone into my Roku box's USB to show videos and pictures I took on the phone. I went to the Verizon store and they said that their multimedia cradles would be available soon, but so far 3 weeks have past and no cradle.
Well, I guess I could fix it if it don't work, I just hope that the extended battery fits.
I bought the soft case to see if I could cut out the extended battery hump easily with a laser engraver.
Misleading title, please change.
Hmm... I've been wanting a cradle for awhile now. So I jumped on this offer, and like any good online buyer, I look for reviews on the product AFTER I buy it. Can you guys confirm that this won't charge the phone? I was just looking for something to hold the phone up while I use WiFi keyboard. :/
http://www.amazon.com/gp/product/B004JX1FOY?tag=5336653508-20
OK I have this dock but I knew going in what it was going to be about so I can give you an idea of what you're getting.
The dock has two connectors on it. One is a USB cable (removable) and one is an A/C plug. The A/C plug is there ONLY to charge the second battery and does not charge the bolt when plugged into the dock. It WILL charge the extended battery (the OEM extended batt does fit in the spare battery slot) but not when it's actually on the Bolt. You can't fit the Bolt in the dock with anything other than the stock battery on it.
The USB cable plugs from the dock into (duh) a USB port on your PC. When it's plugged into the USB port the Bolt does detect the connection and I have been able to charge the Bolt this way. I've also been able to mount the SD card this way to move files and stuff. It doesn't charge as fast being USB vs wall charger but it does charge it. I'm looking at it right now and it just charged it to 100 percent.
The USB cable will not plug directly into the Bolt. It's Mini USB and not Micro USB. Another issue is that you can forget leaving the Bolt in a case and putting it on this dock. It will not fit with any case that I've seen. As was previously mentioned the viewing angle is a bit harsh (it's not angled.) It's basically a straight up and down mount so unless you're putting the dock somewhere at least at eye level it's not as easy to view.
This dock also has NO HDMI port on it. I have mine at work because I don't need the HDMI here. I'm going to get the OEM dock for home use since it's expected to have the HDMI out.
So to summarize it does charge the Bolt's stock battery in the dock as well as the extended in the spare battery slot. You can use the USB functions while plugged into the dock. I'm streaming Pandora right now while docked. The viewing angle is a bit harsh when the dock sits below eye level. The Bolt charges over USB with this dock. The spare battery will only charge via the attached A/C plug. You can't charge it in a case. The USB cable (removable) is mini USB NOT Micro USB and there is no HDMI.
Hope this helps.
ETA: I should add that you could use one of those USB to A/C adapters and plug the USB cable from the dock into A/C and charge that way (if you just wanted a faster charging solution.) I have tested it and it does charge that way.
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
BigMcGuire said:
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
Click to expand...
Click to collapse
I paid even more ($34 I think) but it does what I need it to for now. If I needed HDMI at work I'd have waited but no point in that.
As for the viewing angle it's really not too bad if you can raise the dock more to your eye level. It does wiggle a little bit left to right in the dock (but very little.) You could put it on a book or something that would raise it up and it's fine. I sit pretty low at my desk in my chair so it's not nearly as much of an issue for me (and it's not quite at eye level.)
There is one more thing I forgot to add...someone mentioned getting it in and out of the dock being a pain and I totally agree. It's due to the fact that it basically sits almost upright in the dock. There are times where I've gotten frustrated just trying to get it in or out of there. It's because I always think of angling it into the dock rather than going straight down with it. When I do drop it straight in it usually slides right in with no issue. However I also have a Zagg max coverage shield on my Bolt so I may have more of an issue because of that.
Good luck!
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
pdxdon said:
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
Click to expand...
Click to collapse
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Cubs2008 said:
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Click to expand...
Click to collapse
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
The dock arrived today...
Here is the lowdown after disassembling it:
It looks to be assembled by children with a hot glue gun and old fashioned soldering gun. There is gobs of hot glue used to hold in the 2 LED's. One is an insanely bright blue led, and the other, untested and discarded, is a bi-color led.
There are 2 completely isolated circuits inside, one being a simple micro-USB connector on a cable that is hot glued in place, with the blue LED tapped off the 5V from the USB. I could not find any resistor inline with the LED, so it's lifespan is questionable at best.
The second circuit is the battery charger board held in place with 1 screw at one end, and the mini-USB socket at the other. It has wires to the bi-color LED. This is powered by a 5V 1A wall wart. It does not supply any power to the USB that connects to the phone
The LED's have their full length of lead wire in tact, with over-sized shrink tubing loosely covering them, and all that excess lead wire is sticking out of the hot glue like cat whiskers.
In effect it electrically comparable to a $5 battery charger, and a separate $1 USB to micro-USB cable, nothing more.
There is no media functions whatsoever. It is difficult and time consuming to plug the phone into the cradle, and you cannot use it with the extended battery or any type of case.
Advice: pass! Use your easier to plug in HTC USB cable, and if you want a separate battery charger, get another brand.
lippstuh said:
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
Click to expand...
Click to collapse
They probably could've when they manufactured it.
wow, Cubs2008 thanx for the indepth info!
I wanted to add to the topic that you can actually stand the entire dock upright with the Bolt plugged in and the extended battery in there and it will stay standing up. I'd advise placing the battery and the Bolt in it landscape and then pick the entire dock up and it will stand up. I've used it this way with no ill effects.
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
4Geezy ON DopeDiculous's ROOTED TBeezy!
dopediculous said:
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
Click to expand...
Click to collapse
How soon is "very soon" then?
Hi,
I saw this dock for a really good price:
http://www.dealextreme.com/p/usb-ch...able-for-samsung-galaxy-tab-10-1-p7510-104357
I wonder if the micro-usb cable works with a USB keyboard. Does anyone have this dock? I saw somewhere that the charging part works, but i couldn't find anyone saying the data part works.
I bought this unit a few weeks ago... it takes forever to ship from china, but i knew that going in.
for $13 i didn't expect much going in, and even my minimal expectations haven't been achived.
The one i got has a connector that doesn't work. if i wiggle the hell out of the USB cord i can get the little light to come on some times, but never reliably enough to actually use it.
it has next to no weight, but there are some rubber feet so it doesn't move around with the tablet in it, but it will slide anywhere on your desk if it's not docked.
i put in a request for replacement last week, and have heard nothing from DX.
Bottom line: NOT RECOMMENDED.
Thanks for the info. You saved me a few bucks!
shane86 said:
I bought this unit a few weeks ago... it takes forever to ship from china, but i knew that going in.
for $13 i didn't expect much going in, and even my minimal expectations haven't been achived.
The one i got has a connector that doesn't work. if i wiggle the hell out of the USB cord i can get the little light to come on some times, but never reliably enough to actually use it.
it has next to no weight, but there are some rubber feet so it doesn't move around with the tablet in it, but it will slide anywhere on your desk if it's not docked.
i put in a request for replacement last week, and have heard nothing from DX.
Bottom line: NOT RECOMMENDED.
Click to expand...
Click to collapse