Related
anyone recommend one of these?
also need a couple protective cases, what's good?
the one listed for the Aria should be fine. you just need one with a micro USB connector. I have a power outlet to USB port adaptor in my car, and just use a normal USB cable for charging. saves me the hassle of buying a new charger each time i get a new phone.
i haven't felt the need for a case yet, so no recomendations from me there.
I can't find it on the website, but Walmart has a DC car charger with just two female USB ports, which is awesome, would actually let you charge two USB devices at the same time using the original charge cable. (Also, since HTC is awesome enough to use normal mini-USB ports, a replacement cable is like $10, not $29 as with iPhone). Anyone have one of these that can confirm it works with the Aria?
Like others said, you don't need a car charger specifically for the Aria. Just look for the cheapest micro (not mini) usb charger you can find. I picked one up from my local Fry's for $4.
I have two Honda CRV's and both come equipped with USB port.
Does that mean that any 'ol generic miniport connector will work as "a charger" ?
If anyone comes up with a suggestion for "cradling" inside car, please post
Thanks for the replies.
does this page list the device that is recommended ? the 3.99 item?
maybe these
or also on dealextreme.com
i just bought one off of amazon for a penny.
http://www.amazon.com/Premium-Rapid..._1_1?ie=UTF8&s=wireless&qid=1278894142&sr=8-1
any reason this cable would NOT work with Aria ?
xdafly said:
any reason this cable would NOT work with Aria ?
Click to expand...
Click to collapse
Any microUSB cable should work, that is the beauty of companies that stuck with connector standards.
a great place for cables is monoprice.com. really cheap price for great quality stuff. I grabbed 4 microUSB cables, an HDMI, and some component cables from there for less than $10.
i have some micro usb plugs and for some reason they dont fit all the way into the usb port on my captivate and keep falling out....anyone know where to get car chargers that fit all the way in? most plugs have to thick of a plastic and wont go all the way into the port....the one that came with the captivate has thin plastic around the plug itself..
Take a sharp blade and trim some of the plastic off at a 45 degree angle, worked for me.
one028 said:
i have some micro usb plugs and for some reason they dont fit all the way into the usb port on my captivate and keep falling out....anyone know where to get car chargers that fit all the way in? most plugs have to thick of a plastic and wont go all the way into the port....the one that came with the captivate has thin plastic around the plug itself..
Click to expand...
Click to collapse
I bought the Motorola car charger from ebay for like seven bucks and it fits perfect and is really long. I use a Nokia cable for charging at home and my Samsung cable stays in my travel bag since I'm on the road about three or four days a week. All fis excellent.
I ordered a car charger for like six bucks and usb cable for approx 4 bucks from amazon. Both were original Samsung products and the ends are shaped just like the cable that came with the phone, fits perfect. Just search for Samsung car charger andSamsung usb cable on amazon, if you haven't found an alternate solution.
Sent from my SAMSUNG-SGH-I897 using XDA App
one028 said:
i have some micro usb plugs and for some reason they dont fit all the way into the usb port on my captivate and keep falling out....anyone know where to get car chargers that fit all the way in? most plugs have to thick of a plastic and wont go all the way into the port....the one that came with the captivate has thin plastic around the plug itself..
Click to expand...
Click to collapse
Before you go out and buy a new cord, are you sure that you are opening the hatch all the way? My wife thought that no cords fit and kept falling out until I showed her that you have to slide the USB open until it clicks.
Is it that hard to figure this out? Sand paper or a sharp knife can shave away the plastic on the cable. The side that faces the back of the phone is where they interfere just bevel it a bit and you are all good. forget the stock over priced stuff, I get my cables at the dollar store.
Sent from my SAMSUNG-SGH-I897
Out of the 4+ charging stations I have laid out at home/work, each one has had the MicroUSB plug modified with a razor blade. Takes all of 10 seconds to hack off a little rubber, and then you're all set.
I've had the same issue. Most chargers wont fit. I think the USB on the phone is recessed a little too much for most chargers. Do what everyone else says and hack a little of that rubber off so it fits!
Sent from my SAMSUNG-SGH-I897 using XDA App
I use my old Moto Q wall charger at home, and the stock cord for connecting to my desktop. At work I use the USB cable from my old Moto Q and the stock plug part for charging at work and connecting to my laptop. I got my bases covered. ;-)
Sent from anywhere via XDA app
I bought a charger at Walgreens at all places.. it was 14 bucks and I didn't need to cut anything
I bought Motorola mini to micro usb adapters and they fit just fine. Seems like Motorola OEM stuff is small enough by my experience and other's above. I had tons of mini sized chargers for my GPS, camera, and Blackberry so the adapters have allowed me to keep using them. I bought a pack of 5 for less than $20 on Amazon.
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
All you need is a standard MicroUSB to USB cable. Make sure it's a standard cable, and not a "charge only" cable though.
A bit of advise, generally if you buy a cable that isn't a Samsung USB cable, you're going to have to take a razor blade to your new cable and cut away some of the rubber around the MicroUSB plug. You'll see that untrimmed, you might have a hard time getting the cable secured in the phone's port.
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
All it takes is a razor blade or something similar, and a few seconds. I use a bunch of generic USB cables which all have fat plug heads. Trimming a little of the rubber off and they all work perfect.
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
i bought a blackberry cable from best buy... data and charging... 16 bucks. but when ever your puppy ate your data cable in the middle of the night and you're phone is at 30% battery, ya tend to pay for it...
Inexpensive replacement OEM Charger + USB Cable for Captivate SGH-i897!
4got2g0 said:
Do any of you guys and gals know of an aftermarket cable that will work with the captivate. I lost the original one that came with the phone. Have since bought two different chargers, one from the att store (zero charger), and they charge the phone but don't put it on USB mode like the original one did when I plug it to a laptop.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
Check out www all4cellular DOT com
They have the OEM Samsung Captivate (U.S./Edison) Wall Charger and USB Charging+Data Cable for $6.95 + $2 Shipping.
The item number is "eta0u60jbe". But this item # includes BOTH the USB Wall Charger (# ETA0U60JBE) AND the USB-to-Micro USB data/charging Cable (# ECC1DU2BBE)!
I bought two of these and they are EXACTLY like the original Charger and ~5ft. USB Cable that comes with the Captivate. They are OEM/Samsung-branded and labeled and are not Chinese-made knock-offs. I am in SoCal and received them within a few days of ordering.
Here's a direct link:
www DOT all4cellular DOT com / samsung-eta0u60jbe-wall-charger DOT html
Hope this helps!
Billy B.
^^^ spam!!!
monoprice .com is better!
foofiebeast said:
Weird, for some reason my original cable from ATT now is really loose, I have to like set the phone down a certain way to keep it charging/plugged in.
The only cables that now do fit snuggly are the ones from my external mini hard drives with the fat head, haha, I wonder why...my captivate still looks normal, can't figure it out.
I guess I should see if my normal cable fits with my externals or falls out of those too, if so it would be the cable. But it seems weird that the fat headed cables fit snuggly with my captivate, so that makes me think maybe its the captivate.
long winded stupid post, sorry.
Click to expand...
Click to collapse
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
I second the Monoprice.com recommendation. I buy ALL my cables there. The heads on their micro USB cables are too large to plug into the Captivate unmodified, but I used a Dremel to fix that.
Both of my Monoprice cables are going strong, in contrast with my OEM cable, which started out excellent, but is now so loose as to not maintain a connection unless the phone and cable are precisely arranged.
Sent from my SAMSUNG-SGH-I897 using XDA App
4got2g0 said:
Thanks man. I actually just noticed the "charging only cable" written on the tag on the cable. Now I know what to look for. And you're right, the one I bought from a gas station was always popping out. The one from att fits like a glove though.
Sent from my rooted Cappy.
Click to expand...
Click to collapse
cant hyperlink yet. I ordered 2 of these, they are good and from samsung. on sale at the moment
amazon.com/Samsung-Replacement-Charging-SPH-M330-SCH-R100/dp/B001XXUOQI/ref=sr_1_1?ie=UTF8&qid=1293013918&sr=8-1
USB cables always wear out eventually especially as much as we use them. i just accidentally bought the crappy charge only one now i need to go get a data one
Samsung Captivate Data Cable
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
lee_bruice said:
Hey Guys,
What You Need Is Samsung AT&A Captivate Data Cable?
Click to expand...
Click to collapse
That is indeed the one he needs.
I Am Grad That Is Useful.
Happy New Year!!!
tchan012 said:
I had similar issues, till I realized that the problem was with the sliding door for the microUSB port - make sure it is pushed all the way back (you may hear a click) - its only then that all my MicroUSB cables fit w/out any modifications to them.
as always YMMV.
hope that helps
Click to expand...
Click to collapse
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Jmurph3 said:
I have the same problem with the original cable not fitting snug. Yes, the door is open all the way...until the click. I'm just glad to know I'm not the only one have the problem. Been doing it since day 1. I'm afraid to cut any bit of it off since its already slimmed down and there isn't much left to cut
Click to expand...
Click to collapse
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
jayrod88 said:
Also having this issue. I wonder if Samsung has revised them since I bought mine on launch day.
Click to expand...
Click to collapse
I have a 1009 model. Assuming that means it was manufactured Sept,2010. Now to find a microUSB
We have some micro USB 5' Cables coming in Monday. If they are like the sample they not only fit the Captivate properly, but when plugged into our new Car Plug ->USB (2100mA) adapter, my Captivate shows "Charging (AC) ".
We originally brought in the Hi-Power USB car adapter so iPad & Tablet customers could both run & charge at the same time. We have had enough request from customers looking to use it with Smart Phones, that I had to find the best matching cable.
Sent from my Samsung Captivate with Perception 10.2, Firebird2 v0.4 #49 Kernel, Firmware 2.2.1, Modem T959TLJL3 using XDA App
Monoprice...ALWAYS!!
As mentioned, get your cables from monoprice. I mean, you just can't beat a usb cable for $2. If it needs trimmed, I usually just use a razor knife/box cutter to remove the bulk, and it works perfectly. I actually had to order a 25ft. VGA cable from them a couple of days ago...$8. Seriously. Definitely the cheapest place I've seen to buy cables.
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
I'm also having this issue. I wonder why...
foofiebeast said:
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
Click to expand...
Click to collapse
Yes, this is exactly what I have to do for mine to charge. So I guess I'll have to just start looking for one that will work for me. It seems just any other standard micro USB cable will do the trick. Thanks a lot my friend.
jayrod88 said:
I'm also having this issue. I wonder why...
Click to expand...
Click to collapse
Well upon further inspection, you can see how the top of the phone is curved and if you look at with the USB door open from the top and tilted slightly back you can see how the jack actually looks crooked inside the phone. I'm quite sure that this is because of the curved top parallel to the circuit board that has the jack is too tall. And I think for some reason I might need to trim down the micro end a bit on the front side..it looks like its hitting the front side of the phone.
I'm looking for a replacement cable as well...even OEM is fine. The case around mine cracked off one night when I feel asleep playing on my phone. Mine was always kind of loose compared to the att charging cable which is nice and tight. Does radio shack carry cables like this?
Sent from my SAMSUNG-SGH-I897 using XDA App
i called AT&T about this with my cappy and they said that the charging port was bad and sent me a new phone , thats been 3 mo ago and the problem hasnt recurred.
(just a thought)
Search Amazon for "blackberry usb cable micro usb". The first result should be it, it's a very high quality, shielded cable. To get a solid, snug fit I suggest a razor or a knife to easily cut back some of the rubber around the micro tip. Works amazingly well. I could even make it work before I trimmed it.
just to elaborate, the specific micro end is called a "micro b " usb connection.
not to be confused with mini or micro a
of course the other end is just standard.
The place I work has a 5' nice quality cable that fits my Captivate tight. They got them to go with the 2100mA USB Car Charger we sell. Cost on the cable is $ 4.99 plus shipping (about $2.99 first class parcel).
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I'm not sure if its quality, or just chance, but I've found that only some 3rd-party cables will work. I've tried a blackberry one that didn't work, and a really cheap one that did.
I would suggest keeping the one you got from samsung, just in case.
I'd like to know if anyone else had issues with cables not working?
I got a Samsung cable designed for the galaxy S on Amazon for like $6 with free shipping.
Sent from my SAMSUNG-SGH-I897 using XDA App
Jmurph3 said:
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem.
I used some tools(hammer,knife, etc) to fix the cable.
Now my cable works fine!!
Sent from my phone
I just used a razor blade to trim the rubber back, works great.
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
bluemoon1221 said:
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
Click to expand...
Click to collapse
You should saved me from buying 3 more cables. I distroyed my OEM cable to make a jig because I bricked my phone. I ordered 3 sets of cables and they all had the same problem.... Usb kept popping off. So I was just about to go out and order 3 more sets if cables, this time OEM untill I decided to read this tread. It never occured to me that it was fitting in well because of the extra rubber on the connector. I trimmed it down and now the cable snapped in perfectly like it was supposed to. Thanks for the fix!
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm afraid of buying the wrong cable off Amazon. There is so much out there. Can anyone post a link?
[email protected] said:
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
Click to expand...
Click to collapse
I know this is getting old, but it took me about 2 hours to find an answer that WASN'T recommending to just make sure the slider was all the way open. For no reason at all, my phone cable just wouldn't hold a real connection this morning... your answer saved the day
For cables that are good quality and cheap, go to www.meritline.com ....... I have never gotten a bad cable from them, typically I use their HDMI cables but the USB cables are less complex and work just as well. My last usb cable was one of theirs.
The USB wire the comes in the box was way too small for my liking, so i needed a longer wire, and I figured I might as well buy another wall outlet for travel or just for the heck of it. And I could not find a decent wire for under $5, until I came across this.
$2.28 - High-Speed WALL Power to USB Female Converter (1000mA) - White: http://www.monoprice.com/products/p...=10311&cs_id=1031106&p_id=6784&seq=1&format=2
$1.40 - 6ft USB 2.0 A Male to Micro 5pin Male 28/24AWG Cable w/ Ferrite Core (Gold Plated): http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
They are out stock on the Black Wall USB plug.
The only downside was the S+H, it was $6.60. So I ordered 4 wires, and 2 plugs ($9.74). Total came to $16.34, which is not bad as I could not find anything even close on Amazon.
The combination work perfect. I have attached some pictures below. (Note: All pictures were taking with SGSII, EXCEPT the picture with the SGSII in it, that was taken with a Nexus 4G.)
Just wanted to let everyone know in case someone also wanted to buy one of these.
lucky for me i dont have to pay s&h with monoprice, they're awesome regardless though. I live 5 minutes away from their dist. center so i can just pick up
Funny thing, the 10' cable is cheaper than the 6' in OP.
Also, this phone comes with the exact charger that my Droid Charge came with, but the DC came with a much longer cable.
I've got about 5 of those same wall chargers (in black). Be careful unplugging them, as 3 of mine have all left one of the prongs in the WALL SOCKET when I unplugged them. I notified Monoprice customer service, and they're sending me replacements, but they'll be of the same design.
I hope they change the design soon, because right now both of the prongs are just held on by a piece of solder. One too many tugs and they come right out. So once you plug it in, leave it!
Thanks, I just ordered one of the 6ft cables
Awesome! Exactly what I was looking for. Got 3 cables, 1 wall charger and 1 car charger.
vikramjatt11 said:
The USB wire the comes in the box was way too small for my liking, so i needed a longer wire, and I figured I might as well buy another wall outlet for travel or just for the heck of it. And I could not find a decent wire for under $5, until I came across this.
$2.28 - High-Speed WALL Power to USB Female Converter (1000mA) - White: http://www.monoprice.com/products/p...=10311&cs_id=1031106&p_id=6784&seq=1&format=2
$1.40 - 6ft USB 2.0 A Male to Micro 5pin Male 28/24AWG Cable w/ Ferrite Core (Gold Plated): http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
They are out stock on the Black Wall USB plug.
The only downside was the S+H, it was $6.60. So I ordered 4 wires, and 2 plugs ($9.74). Total came to $16.34, which is not bad as I could not find anything even close on Amazon.
The combination work perfect. I have attached some pictures below. (Note: All pictures were taking with SGSII, EXCEPT the picture with the SGSII in it, that was taken with a Nexus 4G.)
Just wanted to let everyone know in case someone also wanted to buy one of these.
Click to expand...
Click to collapse
so how much faster do you think this charges your phone
so how much faster do you think this charges your phone
Click to expand...
Click to collapse
Well considering the stock charger is also a 1000mAH... it won't be any faster.
yeah didnt think to check for myself. to much sleep depprevation.
Sorry if this is a noob question, Im coming from a blackberry so Im a bit retarded in this subject.
Are monoprice good quality cables? The supplied cable with the epic touch is just.. ridiculously short. The block.. charger.. thing is fine, I just want a longer cable! I found some longer OEM chargers as well that I was thinking of getting off Amazon.
IE:
http://www.amazon.com/Samsung-ATADU...=wireless&rps=1&ie=UTF8&qid=1316961827&sr=1-1
Either way its no big deal, just dont want to end up frying my phone because I cheaped out on cables lol.
also, for anyone looking for a car charger, ive read great things about:
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1317080917&sr=8-1
i plan on getting that myself, waiting to hear some feedback on the monoprice cables first though, otherwise ill go with the samsung oem charger i posted above
YESS, those chargers are amazing... i purchased 10 last year, when they were like $1 each... dey are so amazing, i onli broke 2 so far, n that was my fault.... dey charge the phones super fast, n love the blue light....
t0t said:
also, for anyone looking for a car charger, ive read great things about:
http://www.amazon.com/Motorola-Vehi...Q9CA/ref=sr_1_1?ie=UTF8&qid=1317080917&sr=8-1
i plan on getting that myself, waiting to hear some feedback on the monoprice cables first though, otherwise ill go with the samsung oem charger i posted above
Click to expand...
Click to collapse
I bought this one since it is an official Samsung charger, for cheap ($5):
http://www.amazon.com/gp/product/B001UB279A
But I bought it using the link shown below - the "buy all items" showing the Samsung car charger, Samsung regular charger + USB cable, and Samsung extra USB cable for $10 total.
Bear in mind - the USB cables are all the shortie length cables.
The car charger seems nice, has a spiral cord of decent length - same as my old Motorola charger.
vikramjatt11 said:
The USB wire the comes in the box was way too small for my liking, so i needed a longer wire, and I figured I might as well buy another wall outlet for travel or just for the heck of it. And I could not find a decent wire for under $5, until I came across this.
$2.28 - High-Speed WALL Power to USB Female Converter (1000mA) - White: http://www.monoprice.com/products/p...=10311&cs_id=1031106&p_id=6784&seq=1&format=2
$1.40 - 6ft USB 2.0 A Male to Micro 5pin Male 28/24AWG Cable w/ Ferrite Core (Gold Plated): http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5458&seq=1&format=2
They are out stock on the Black Wall USB plug.
The only downside was the S+H, it was $6.60. So I ordered 4 wires, and 2 plugs ($9.74). Total came to $16.34, which is not bad as I could not find anything even close on Amazon.
The combination work perfect. I have attached some pictures below. (Note: All pictures were taking with SGSII, EXCEPT the picture with the SGSII in it, that was taken with a Nexus 4G.)
Just wanted to let everyone know in case someone also wanted to buy one of these.
Click to expand...
Click to collapse
What's the difference between the Gold plated and the non Gold plated?
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5459&seq=1&format=2
and this
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5139&seq=1&format=2
? Besides .10..
the description of the gold plated one says:
- Gold Plated Connectors for corrosion resistence ensuring consistant and reliable conductivity
- Ferrite Core to filter out signal noise and reduce transmission errors
Sean-El said:
What's the difference between the Gold plated and the non Gold plated?
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5459&seq=1&format=2
and this
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5139&seq=1&format=2
? Besides .10..
Click to expand...
Click to collapse
Since I have not seen anyone answer your question, yes, monoPrice is an excellent site for great and cheap cables. Highly recommend them. Also, since you are coming from a BB, that is the brand of home/office charger that I always use... The foldable blade BB micro USB chargers that put out 5V worked perfectly on my Evo 4G and current Evo 3D... Looking to use that for my Epic 4GT when I get that in a couple days
t0t said:
Sorry if this is a noob question, Im coming from a blackberry so Im a bit retarded in this subject.
Are monoprice good quality cables? The supplied cable with the epic touch is just.. ridiculously short. The block.. charger.. thing is fine, I just want a longer cable! I found some longer OEM chargers as well that I was thinking of getting off Amazon.
IE:
http://www.amazon.com/Samsung-ATADU...=wireless&rps=1&ie=UTF8&qid=1316961827&sr=1-1
Either way its no big deal, just dont want to end up frying my phone because I cheaped out on cables lol.
Click to expand...
Click to collapse
I got one of those $2.28 wall blocks for my girlfriend's 2nd gen ipod touch. She was delighted because ipods don't come with wall chargers. At least the 2nd gen didn't. Apple trying to be "green" and crap.
Is there any risk using these non-Samsung chargers. Yes, they also put out 1000mA, but do they auto-shut off once the charging is complete, etc?
just a heads up the wall/usb charger plug has been discontinued
anyone know of another 1000mA option?
pi1ot said:
Is there any risk using these non-Samsung chargers. Yes, they also put out 1000mA, but do they auto-shut off once the charging is complete, etc?
Click to expand...
Click to collapse
No risk using non-Samsung as long as you get one from a reputable brand or company. After all, the included chargers are usually POS and still get the job done. No offense, but the charger in the OP looks to be very cheaply-made. And I have to wonder if the components inside reflect that. If you invest in a higher quality charger now you will still be using it 3-4 phones later, if not longer, and they will pay for themselves. Same goes for cables.
Monoprice is awesome. When working in the A/V field I lost count how many hundreds of their cables and adapters I used. Several levels of quality usually available, at great pricepoints.
I've been using a Rosewill 4-port wall charger for a few years and it's been problem-free. Puts out 2 amps.