Related
here is a video that i did on the powermaty receiver door for the htc evo 4g.. let me know if you have any questions
I bought this... it works... however... i am not so lazy that I have to pay $60 to not connect my phone.... i ended up returning and buying sprint's extended battery. Having said that, it was really cool. Is it justifiable though? To each his own. Not bashing the product, just not for me.
I have the single mat that came with the door purchase
Is anyone else experiencing troubles or difficulties charging with the powermat?
It seems as if I'll put the phone on the mat sometimes, and if I don't sit and play with it until the position is JUST RIGHT, it will all light up indicating a good charge, then the two white lights will turn off, and the "unplugged" sound will happen, charging light will turn off, but the phone is still on the mat.
Or I'll wake up after its been sitting all night on the charger, no lights indicating its charging, and it will be at/ around 78% and it was placed on the charger correctly.
Is the powermat really this finicky?
Or would getting a multiple mat maybe enhance my experience?
Been using the PowerMat for a week now and have only one complaint. The Little Piece that must be inserted into the USB port has broken off. It is very small and I am sure that it will be lost in a matter of time. I plan on contacting the manufacturer and see if they will provide a replacement since it only lasted a week.
Returned mine... Got sick of how it had to be placed PERFECTLY, and if I got a text message or anything at night it would vibrate and slip from that spot and for some reason discharge rapidly.
i'll just let u guys know.. this thing is terrible. the connector for the case to phone is the worst, cheapest, poorly designed attachment i've ever seen. broke the first day of use. returned it.
garbage.
When we first got them in at Best Buy I put one on my phone and I was like "wow this is stupid, you have to plug it into the micro usb port" I figured it couldn't be that hard to slip something in between the battery and the phone but that's just me.
We sell a lot of Powermats this time of year... than they all get returned after Christmas lol
I plan on doing the touchstone mod, then I don't have to have a crappy plug on the bottom and I won't have to redo my 3m dinoc mod
mrono said:
I plan on doing the touchstone mod, then I don't have to have a crappy plug on the bottom and I won't have to redo my 3m dinoc mod
Click to expand...
Click to collapse
Same here, I was holding off doing the touchstone mod to see what this was gonna be like when it came out.
BUT, this little plug makes it an epic FAIL!
When I saw the prototype battery cover with the dongle, I just figured it was for testing only, and they would have that sorted out for production. I can see that if you weren't a hard core user, and just wanted to save a little hassle of plugging in ur charger, okay. But if ur like me, I plug my phone into my PC several times throughout the day for either ADB, music/movie transfer, etc. Having to deal with that little dongle would be extra annoying, thus not saving me any of the hassle that this setup was intended to help with.
What I really want to do with the Palm touchstone setup is to integrate it into my OB Commuter case and my car mount. This is where the wireless charging would have the greatest benefit, I believe. Imagine jumping in ur rig and putting ur Evo on it's mount, bam, it's charging. No clumsy cords strewn about the dash, this would be so much nicer.
At home, I really don't see the need or benefit of this charger. Ur phone has to be set in one place to be charging. So, I pick it up to take a call, and it's not charging any more. Or, I want to play a game on the couch, but my battery is low, and my charging pad isn't on the couch. I would still need a corded charger to plug into while I play with my phone. I do appreciate the progress in wireless charging though, it will be nice when it works over larger distances, like a couple feet. That I will gladly pay for!
JTNiggle;9186404
[B said:
What I really want to do with the Palm touchstone setup is to integrate it into my OB Commuter case and my car mount. This is where the wireless charging would have the greatest benefit, I believe. Imagine jumping in ur rig and putting ur Evo on it's mount, bam, it's charging. No clumsy cords strewn about the dash, this would be so much nicer.
[/B]
Click to expand...
Click to collapse
Thats my goal with this. I tried the touchstone mod with my hero and it was a PITA to get it just right to charge. The touchstone also requires a 1000ma charger, and the couple of car-usb adapters I picked up wouldn't charge the phone.
I had some trouble with the little dongle (it is dirt cheap). I had to take a small flat head screw driver to the pins in the new cover and push them in toward the back. Did that and the connection has been great since.
I must be one of the few that actually enjoy this product. I have the Evo case along with the 3X home office mat.
Being that I have many gadgets and HATE wires, I picked this up on Christmas Eve today. After all, I have my Macbook Air with all the Apple wireless accessories, wireless internet, why not go wireless power right?
As with any thing I buy, I researched a good bit on the Powermat and Evo back cover. I did like how it looked pretty close to the stock back cover and the USB connector was understandable as how else could they get it to charge. However, I could see how for those who use USB constantly it might be somewhat a pain, and also probably break compatibility with many cases (including my Seidio slide case). I did like the Powercube that it comes with (which is pretty much just a charging receiver with mini USB + attachments) so that I can charge my DSi/PSP/iPod/etc. A very important observation I've come to notice is that everything charges as it was connected to an AC adapter, NOT USB which means faster charging including the Evo.
However, I've come to use my Evo less and less. It's strictly for calls now that I have a new iPod touch. I run the Evo as a MiFi router in my pocket all day and with Google Voice I can do most things on the iPod. At work, I use the Evo to tether all day for internet access since my office's internet is quite horrid and blocks all kind of legitimate sites. I hate desk clutter, as much as I seem to accumulate it, I try to remove wires from the equation. I absolutely HATE when I move something and hear something else fall or move around because of wires tangled/crossed, drives me nuts. So at home I have my 3X charger and I'll probably get a 1X one for the office so I can just keep my phone charging while I tether and if I need to run downstairs or across the building I can just pick it up and drop it back off when I return. No need to plug things in, I like that.
So I've really come to like the Powermat because it removes a lot of the frustation for me and also lets me charge multiple devices on a single mat. Instead of having to swap AC adapters out and find outlets, I can just use the Powercube attachments or the Powermat receiver for the device. No need to worry about something possibly throwing the device off my desk or just annoying wires. I just find it a lot easier and I admit much cooler when the noise and light come on as I place it on the mat. Some people say it's 'finicky' with charging unless placed just right but the magnets seem to guide it quite well on my mat.
I'm waiting for the new iPod case from Powermat that should fit the 4th gen models but so far I like what they've done. This is the future and the only way this is going to catch on is if it's supported. Once manufacturers see there is a standard out there, they will integrate it into their devices. I'm trying to do my part by supporting a standard that's actually quite tangible right now. There were many companies trying to do this years ago and now and only Powermat has seemed to grab a good market share of this 'wireless charging' tech.
We all would like for this to be just 'built-in' but manufacturers won't until there's a demand. I know with the current restrictions and modifications necessary to get it working with devices may deter some people, but I think it's a good step in the right direction. Glad someone is finally trying to bring it to the mainstream market.
JTNiggle said:
What I really want to do with the Palm touchstone setup is to integrate it into my OB Commuter case and my car mount. This is where the wireless charging would have the greatest benefit, I believe. Imagine jumping in ur rig and putting ur Evo on it's mount, bam, it's charging. No clumsy cords strewn about the dash, this would be so much nicer.
Click to expand...
Click to collapse
Freakin brilliant dude, seriously
I absolutely love my EVO Powermat, but I keep having problems with the back cover losing function. It works fine at the start, but if I take the cover off to pop the battery out, when a reflash/reboot hangs, it stops functioning. Powermat said to take it back to Best Buy, which I did, but now my second new one has stopped working as well. It does the cute "chirp" when it lines up on the mat, but the LED doesn't light. Charging on cable, both USB and AC are still fine. Anybody else heard of this issue?
This isn't any sort of technological progress. It wastes a huge amount of energy, and doesn't charge the phone as quickly as a wall charger. Double negative if you ask me.
I think it's a great idea, but it fails miserably.
I sync with my (very locked down) work pc and after two battery d door failures in 3 weeks I returned it. The only way I can sync is through usb and the usb dongle doesn't hold up.
It has a premium price but in the end my experience wasn't positive.
Swyped on my PC36100 using tapatalk!
Their Customer Service people have been very nice, and apparently it is now well-documented that the little dongle sucks. Powermat is redesigning it and I am holding mine for return until the new piece is available. No sense going back to Best Buy again to get another one from the same lot.They will offer me a no-charge UPS RMA pickup when the time comes. Hey, I like it when it works... what can I say.
Tom:
Theres no way the design as it currently stands should have passed testing.
Swyped on my PC36100 using tapatalk!
@John: True... it's like they were so relieved that the lid fit right and the concept actually worked when you first installed it, that they never tested remove/reinstall cycles. There is a wrong way and a right way to test. When I worked as a project manager at a software company, the programmers used to get pissed when I broke a program. They were so personally invested in the product that they didn't understand that the goal of any good beta tester should be to break the product, not confirm that it works.
The only problem with my powermat is that when it is fully charged it cuts off and when I wake up the battery is at 80% or less. This is very frustrating, has anyone got a fix for this? I believe it is a setting in the phone that is causing this issue. When I first got the powermat it worked correctly and then I updated my phone and now it is not working! Any suggestions?
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
I'm also having this issue. I wonder why...
foofiebeast said:
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
Click to expand...
Click to collapse
Yes, this is exactly what I have to do for mine to charge. So I guess I'll have to just start looking for one that will work for me. It seems just any other standard micro USB cable will do the trick. Thanks a lot my friend.
jayrod88 said:
I'm also having this issue. I wonder why...
Click to expand...
Click to collapse
Well upon further inspection, you can see how the top of the phone is curved and if you look at with the USB door open from the top and tilted slightly back you can see how the jack actually looks crooked inside the phone. I'm quite sure that this is because of the curved top parallel to the circuit board that has the jack is too tall. And I think for some reason I might need to trim down the micro end a bit on the front side..it looks like its hitting the front side of the phone.
I'm looking for a replacement cable as well...even OEM is fine. The case around mine cracked off one night when I feel asleep playing on my phone. Mine was always kind of loose compared to the att charging cable which is nice and tight. Does radio shack carry cables like this?
Sent from my SAMSUNG-SGH-I897 using XDA App
i called AT&T about this with my cappy and they said that the charging port was bad and sent me a new phone , thats been 3 mo ago and the problem hasnt recurred.
(just a thought)
Search Amazon for "blackberry usb cable micro usb". The first result should be it, it's a very high quality, shielded cable. To get a solid, snug fit I suggest a razor or a knife to easily cut back some of the rubber around the micro tip. Works amazingly well. I could even make it work before I trimmed it.
just to elaborate, the specific micro end is called a "micro b " usb connection.
not to be confused with mini or micro a
of course the other end is just standard.
The place I work has a 5' nice quality cable that fits my Captivate tight. They got them to go with the 2100mA USB Car Charger we sell. Cost on the cable is $ 4.99 plus shipping (about $2.99 first class parcel).
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I'm not sure if its quality, or just chance, but I've found that only some 3rd-party cables will work. I've tried a blackberry one that didn't work, and a really cheap one that did.
I would suggest keeping the one you got from samsung, just in case.
I'd like to know if anyone else had issues with cables not working?
I got a Samsung cable designed for the galaxy S on Amazon for like $6 with free shipping.
Sent from my SAMSUNG-SGH-I897 using XDA App
Jmurph3 said:
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem.
I used some tools(hammer,knife, etc) to fix the cable.
Now my cable works fine!!
Sent from my phone
I just used a razor blade to trim the rubber back, works great.
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
bluemoon1221 said:
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
Click to expand...
Click to collapse
You should saved me from buying 3 more cables. I distroyed my OEM cable to make a jig because I bricked my phone. I ordered 3 sets of cables and they all had the same problem.... Usb kept popping off. So I was just about to go out and order 3 more sets if cables, this time OEM untill I decided to read this tread. It never occured to me that it was fitting in well because of the extra rubber on the connector. I trimmed it down and now the cable snapped in perfectly like it was supposed to. Thanks for the fix!
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm afraid of buying the wrong cable off Amazon. There is so much out there. Can anyone post a link?
[email protected] said:
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
Click to expand...
Click to collapse
I know this is getting old, but it took me about 2 hours to find an answer that WASN'T recommending to just make sure the slider was all the way open. For no reason at all, my phone cable just wouldn't hold a real connection this morning... your answer saved the day
For cables that are good quality and cheap, go to www.meritline.com ....... I have never gotten a bad cable from them, typically I use their HDMI cables but the USB cables are less complex and work just as well. My last usb cable was one of theirs.
So, after having the WiFi XOOM since launch day I have played with the device to no end, charged it a handful of times or so and have excellent battery life on the device even OC to 1.5 GHZ.
The question I pose here though is if anyone else has these two minor but annoying problems with their XOOM charger. Upon plugging the male pin into the female port on the XOOM the connection is VERY loose and pulls out with the flick of the finger or a gentle movement. This annoys me due to the fact that I like to know my device is secure and plugged in. Say it came out at night while I was asleep and fell into a cup of water (rare chance, but still a possibility) I would probably be a little upset.
The second problem is the male plugs of the charge to female power outlet. This is also one of the cheapest feeling designs I have ever seen for a device that costs $600. This part pulls out with even more ease which is alright I guess at times, but once again I like to fight to get stuff unplugged, I at least know it is in there snug and will not be unplugged by my dog wagging his tail (this actually DID happen the other night while working on some new apps and testing).
Call me grumbles if you want, but if one of my $20 phones that also comes with a charger is stabler than a $600 device I have a bit of a problem with that. My question is if anyone else is having this problem or if this is a controlled case?
Best Wishes.
I can't stand it either. If you move it when its plugged in it comes out
Sent from my Xoom using XDA App
Mine's extremely loose also. My $20 candy bar phone has a better charger connector than my $600 tablet just like you said.
I am using the standard dock to charge at work, so I really haven't noticed an issue. I do have another charger at home, but rarely use it.
Mike
I was browsing around on ebay and found a multimedia dock for our beloved TB's. Its deff not the highest quality dock i have ever seen, but it looks like a viable replacement until Verizon or HTCpedia release the official one. It doesnt look like it is slanted slightly to have a nice viewing angle but still its $30...the one from Verizon is $60. Let me know what you guys think.
http://cgi.ebay.com/USB-Sync-Battery-Charger-Cradle-HTC-Thunderbolt-4G-/380333733043?pt=PDA_Accessories&hash=item588da834b3
That one has been available for a little while now. There is a thread where someone has a link for it cheaper also. I'm holding out for the Verizon one.
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
halopower said:
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
Click to expand...
Click to collapse
aw really? i wanted to get this only for charging purposes but whats the point if it doesnt charge
Bah, Noob with first smartphone here! I failed to read any replies, and jumped at the deal, and even ordered the silicon soft case from the same guy.
I want to plug the phone into my Roku box's USB to show videos and pictures I took on the phone. I went to the Verizon store and they said that their multimedia cradles would be available soon, but so far 3 weeks have past and no cradle.
Well, I guess I could fix it if it don't work, I just hope that the extended battery fits.
I bought the soft case to see if I could cut out the extended battery hump easily with a laser engraver.
Misleading title, please change.
Hmm... I've been wanting a cradle for awhile now. So I jumped on this offer, and like any good online buyer, I look for reviews on the product AFTER I buy it. Can you guys confirm that this won't charge the phone? I was just looking for something to hold the phone up while I use WiFi keyboard. :/
http://www.amazon.com/gp/product/B004JX1FOY?tag=5336653508-20
OK I have this dock but I knew going in what it was going to be about so I can give you an idea of what you're getting.
The dock has two connectors on it. One is a USB cable (removable) and one is an A/C plug. The A/C plug is there ONLY to charge the second battery and does not charge the bolt when plugged into the dock. It WILL charge the extended battery (the OEM extended batt does fit in the spare battery slot) but not when it's actually on the Bolt. You can't fit the Bolt in the dock with anything other than the stock battery on it.
The USB cable plugs from the dock into (duh) a USB port on your PC. When it's plugged into the USB port the Bolt does detect the connection and I have been able to charge the Bolt this way. I've also been able to mount the SD card this way to move files and stuff. It doesn't charge as fast being USB vs wall charger but it does charge it. I'm looking at it right now and it just charged it to 100 percent.
The USB cable will not plug directly into the Bolt. It's Mini USB and not Micro USB. Another issue is that you can forget leaving the Bolt in a case and putting it on this dock. It will not fit with any case that I've seen. As was previously mentioned the viewing angle is a bit harsh (it's not angled.) It's basically a straight up and down mount so unless you're putting the dock somewhere at least at eye level it's not as easy to view.
This dock also has NO HDMI port on it. I have mine at work because I don't need the HDMI here. I'm going to get the OEM dock for home use since it's expected to have the HDMI out.
So to summarize it does charge the Bolt's stock battery in the dock as well as the extended in the spare battery slot. You can use the USB functions while plugged into the dock. I'm streaming Pandora right now while docked. The viewing angle is a bit harsh when the dock sits below eye level. The Bolt charges over USB with this dock. The spare battery will only charge via the attached A/C plug. You can't charge it in a case. The USB cable (removable) is mini USB NOT Micro USB and there is no HDMI.
Hope this helps.
ETA: I should add that you could use one of those USB to A/C adapters and plug the USB cable from the dock into A/C and charge that way (if you just wanted a faster charging solution.) I have tested it and it does charge that way.
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
BigMcGuire said:
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
Click to expand...
Click to collapse
I paid even more ($34 I think) but it does what I need it to for now. If I needed HDMI at work I'd have waited but no point in that.
As for the viewing angle it's really not too bad if you can raise the dock more to your eye level. It does wiggle a little bit left to right in the dock (but very little.) You could put it on a book or something that would raise it up and it's fine. I sit pretty low at my desk in my chair so it's not nearly as much of an issue for me (and it's not quite at eye level.)
There is one more thing I forgot to add...someone mentioned getting it in and out of the dock being a pain and I totally agree. It's due to the fact that it basically sits almost upright in the dock. There are times where I've gotten frustrated just trying to get it in or out of there. It's because I always think of angling it into the dock rather than going straight down with it. When I do drop it straight in it usually slides right in with no issue. However I also have a Zagg max coverage shield on my Bolt so I may have more of an issue because of that.
Good luck!
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
pdxdon said:
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
Click to expand...
Click to collapse
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Cubs2008 said:
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Click to expand...
Click to collapse
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
The dock arrived today...
Here is the lowdown after disassembling it:
It looks to be assembled by children with a hot glue gun and old fashioned soldering gun. There is gobs of hot glue used to hold in the 2 LED's. One is an insanely bright blue led, and the other, untested and discarded, is a bi-color led.
There are 2 completely isolated circuits inside, one being a simple micro-USB connector on a cable that is hot glued in place, with the blue LED tapped off the 5V from the USB. I could not find any resistor inline with the LED, so it's lifespan is questionable at best.
The second circuit is the battery charger board held in place with 1 screw at one end, and the mini-USB socket at the other. It has wires to the bi-color LED. This is powered by a 5V 1A wall wart. It does not supply any power to the USB that connects to the phone
The LED's have their full length of lead wire in tact, with over-sized shrink tubing loosely covering them, and all that excess lead wire is sticking out of the hot glue like cat whiskers.
In effect it electrically comparable to a $5 battery charger, and a separate $1 USB to micro-USB cable, nothing more.
There is no media functions whatsoever. It is difficult and time consuming to plug the phone into the cradle, and you cannot use it with the extended battery or any type of case.
Advice: pass! Use your easier to plug in HTC USB cable, and if you want a separate battery charger, get another brand.
lippstuh said:
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
Click to expand...
Click to collapse
They probably could've when they manufactured it.
wow, Cubs2008 thanx for the indepth info!
I wanted to add to the topic that you can actually stand the entire dock upright with the Bolt plugged in and the extended battery in there and it will stay standing up. I'd advise placing the battery and the Bolt in it landscape and then pick the entire dock up and it will stand up. I've used it this way with no ill effects.
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
4Geezy ON DopeDiculous's ROOTED TBeezy!
dopediculous said:
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
Click to expand...
Click to collapse
How soon is "very soon" then?
so i made the mistake of forgetting to close my bedroom door behind me while i went to make a sandwich. during the 5 minutes i was gone, my cat came and demolished the usb cable that came with the phone. I liked that cable, and i was wondering if anyone knew where i could buy another OEM cable (or one thats just as long, works just as well, and fits in my phone case)
the main reason i need one though is because its the only one i have that fits in the usb while i have my case on it
Same here. The micro-USB cable I have doesn't work completely (it doesn't go in all the way I think.) So I have to position the phone in the right angle to connect it to my computer.
...
Check Amazon.com and get a wireless inductive charger with charging pad. They are around $35 for the set and then you don't have to worry about using the USB cable.
But then again you probably would need one for things like ADB and modding the phone so up to you but its an option.
I just ordered one myself and will be getting some extra charging pads for each of my work offices.
I've had excellent results with the cables from monoprice.com--almost all of the are $2 or less.
I ordered a half dozen of the "premium" ones with ferrite cores(for a buck thirty apiece) a few months back so I could have a spares at home, in the truck, at work, etc. etc. and I've had zero problems with any of them so far.
Hey my cat knows better.
sent from my wicked 2 Gs4