I was browsing around on ebay and found a multimedia dock for our beloved TB's. Its deff not the highest quality dock i have ever seen, but it looks like a viable replacement until Verizon or HTCpedia release the official one. It doesnt look like it is slanted slightly to have a nice viewing angle but still its $30...the one from Verizon is $60. Let me know what you guys think.
http://cgi.ebay.com/USB-Sync-Battery-Charger-Cradle-HTC-Thunderbolt-4G-/380333733043?pt=PDA_Accessories&hash=item588da834b3
That one has been available for a little while now. There is a thread where someone has a link for it cheaper also. I'm holding out for the Verizon one.
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
halopower said:
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
Click to expand...
Click to collapse
aw really? i wanted to get this only for charging purposes but whats the point if it doesnt charge
Bah, Noob with first smartphone here! I failed to read any replies, and jumped at the deal, and even ordered the silicon soft case from the same guy.
I want to plug the phone into my Roku box's USB to show videos and pictures I took on the phone. I went to the Verizon store and they said that their multimedia cradles would be available soon, but so far 3 weeks have past and no cradle.
Well, I guess I could fix it if it don't work, I just hope that the extended battery fits.
I bought the soft case to see if I could cut out the extended battery hump easily with a laser engraver.
Misleading title, please change.
Hmm... I've been wanting a cradle for awhile now. So I jumped on this offer, and like any good online buyer, I look for reviews on the product AFTER I buy it. Can you guys confirm that this won't charge the phone? I was just looking for something to hold the phone up while I use WiFi keyboard. :/
http://www.amazon.com/gp/product/B004JX1FOY?tag=5336653508-20
OK I have this dock but I knew going in what it was going to be about so I can give you an idea of what you're getting.
The dock has two connectors on it. One is a USB cable (removable) and one is an A/C plug. The A/C plug is there ONLY to charge the second battery and does not charge the bolt when plugged into the dock. It WILL charge the extended battery (the OEM extended batt does fit in the spare battery slot) but not when it's actually on the Bolt. You can't fit the Bolt in the dock with anything other than the stock battery on it.
The USB cable plugs from the dock into (duh) a USB port on your PC. When it's plugged into the USB port the Bolt does detect the connection and I have been able to charge the Bolt this way. I've also been able to mount the SD card this way to move files and stuff. It doesn't charge as fast being USB vs wall charger but it does charge it. I'm looking at it right now and it just charged it to 100 percent.
The USB cable will not plug directly into the Bolt. It's Mini USB and not Micro USB. Another issue is that you can forget leaving the Bolt in a case and putting it on this dock. It will not fit with any case that I've seen. As was previously mentioned the viewing angle is a bit harsh (it's not angled.) It's basically a straight up and down mount so unless you're putting the dock somewhere at least at eye level it's not as easy to view.
This dock also has NO HDMI port on it. I have mine at work because I don't need the HDMI here. I'm going to get the OEM dock for home use since it's expected to have the HDMI out.
So to summarize it does charge the Bolt's stock battery in the dock as well as the extended in the spare battery slot. You can use the USB functions while plugged into the dock. I'm streaming Pandora right now while docked. The viewing angle is a bit harsh when the dock sits below eye level. The Bolt charges over USB with this dock. The spare battery will only charge via the attached A/C plug. You can't charge it in a case. The USB cable (removable) is mini USB NOT Micro USB and there is no HDMI.
Hope this helps.
ETA: I should add that you could use one of those USB to A/C adapters and plug the USB cable from the dock into A/C and charge that way (if you just wanted a faster charging solution.) I have tested it and it does charge that way.
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
BigMcGuire said:
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
Click to expand...
Click to collapse
I paid even more ($34 I think) but it does what I need it to for now. If I needed HDMI at work I'd have waited but no point in that.
As for the viewing angle it's really not too bad if you can raise the dock more to your eye level. It does wiggle a little bit left to right in the dock (but very little.) You could put it on a book or something that would raise it up and it's fine. I sit pretty low at my desk in my chair so it's not nearly as much of an issue for me (and it's not quite at eye level.)
There is one more thing I forgot to add...someone mentioned getting it in and out of the dock being a pain and I totally agree. It's due to the fact that it basically sits almost upright in the dock. There are times where I've gotten frustrated just trying to get it in or out of there. It's because I always think of angling it into the dock rather than going straight down with it. When I do drop it straight in it usually slides right in with no issue. However I also have a Zagg max coverage shield on my Bolt so I may have more of an issue because of that.
Good luck!
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
pdxdon said:
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
Click to expand...
Click to collapse
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Cubs2008 said:
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Click to expand...
Click to collapse
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
The dock arrived today...
Here is the lowdown after disassembling it:
It looks to be assembled by children with a hot glue gun and old fashioned soldering gun. There is gobs of hot glue used to hold in the 2 LED's. One is an insanely bright blue led, and the other, untested and discarded, is a bi-color led.
There are 2 completely isolated circuits inside, one being a simple micro-USB connector on a cable that is hot glued in place, with the blue LED tapped off the 5V from the USB. I could not find any resistor inline with the LED, so it's lifespan is questionable at best.
The second circuit is the battery charger board held in place with 1 screw at one end, and the mini-USB socket at the other. It has wires to the bi-color LED. This is powered by a 5V 1A wall wart. It does not supply any power to the USB that connects to the phone
The LED's have their full length of lead wire in tact, with over-sized shrink tubing loosely covering them, and all that excess lead wire is sticking out of the hot glue like cat whiskers.
In effect it electrically comparable to a $5 battery charger, and a separate $1 USB to micro-USB cable, nothing more.
There is no media functions whatsoever. It is difficult and time consuming to plug the phone into the cradle, and you cannot use it with the extended battery or any type of case.
Advice: pass! Use your easier to plug in HTC USB cable, and if you want a separate battery charger, get another brand.
lippstuh said:
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
Click to expand...
Click to collapse
They probably could've when they manufactured it.
wow, Cubs2008 thanx for the indepth info!
I wanted to add to the topic that you can actually stand the entire dock upright with the Bolt plugged in and the extended battery in there and it will stay standing up. I'd advise placing the battery and the Bolt in it landscape and then pick the entire dock up and it will stand up. I've used it this way with no ill effects.
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
4Geezy ON DopeDiculous's ROOTED TBeezy!
dopediculous said:
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
Click to expand...
Click to collapse
How soon is "very soon" then?
Related
So I went a little crazy today. Before k begin, I need to explain some events leading up to this accessory shopping spree. I have been out from work for 5 weeks while recovering from lumbar back surgery. For the 2 weeks prior to surgery and during my recovery I had 4 Asus Transformers. This week i had enough with 2nd and 4th chances. Dont get me wrong, Asus made a great product. I would be still using if I got my hands on a July unit. HOWEVER, 1 week with the Tab 10.1 and I am wondering why I was so hung up on ports. I go back to work Monday. So I am going to rely heavily on this light and thin wonder, meanwhile my work laptop will be 'bolted' to my desk (too big and heavy still to tote around.) Here are the accessories I picked up today and my initial thoughts.
1) Keyboard Dock - This keyboard is compact but they aren't joking when they say full size. Having owned and used the Asus Keyboard for the Transformer, the Samsung kit is far more productive for me. I felt sort of cramped on the Asus and always had to disable the trackpad. Thumbs would glaze it and cursor would end up where it shouldn't be. The dock lit right up. No funky hide the clock, and I just had to change from ThumbKeyboard to Samsung. This is easily done with the notification option when using any keyboard in Honeycomb. Once I undock, it was a breeze to switch back to ThumbKeyboard. The dock had no tight squeezes on the unit itself or the invisible shield.
2) Media Dock - I did get the clock screen. Tapping back took me back to my last used activity. From there I could home, recent apps, or back my way out. Not tired the HDMI pass through as I don't have the adapter, and ill hook up my work deal speakers on Monday. The angle is great for my sitting height at my desk or event when standing. The ease of docking/undocking was easy. The downer is the front inside edge of the dock cradle has to little tiny notches. They tend to ruffle the invisible shield in the lower L/R corners of the Tab. You can flattened back out once you undocn. But I am sure it'll result in a new invisible shield periodically. this is going to sit on my desk at work. That way I can charge, use, listen to music, or multi task while my work laptop is in tied up. It'll function perfectly for that purpose, but the Invisible Shield wear and tear will be a test to see if it stays.
3) Samsung Wall Charger - Just like the one included with the tablet. Same length and module wall plug. Will use with Media dock while included plug will stay at home with Keyboard Dock. I've learned my lesson with non OEM chargers... they can damage your battery and its ability to hold charge. So I am drawn to OEM plugs or certified by OEM partners. But honestly $50 for a 3ft cable and wall plug? Even the Apple chargers are less than that. But no alternatives mean I pay the price.
4) Samsung Leather Pounch - I was very shocked when I pulled it out of the case! THIS THING IS NICE! High quality leather and soft felt interior, but most importantly it is thinner than the Tab itself. Therefore it does not double or tripple the thickness of the Tab's thin profile. Which is what drew me to the tab to begin with. It will work great to transport to/from/around work and other travel needs. I highly recommend for those who don't want a flipper always dangling around while thumbing it. I found that a annoying with my iPAD1 and Asus experiences. So if you aren't a fan of the full size keyboard and angle setup, this will be a great thin, light, and safe method to protect your tablet. It is basic but stylish. Best of all its a 1 step process to remove the Tab10.1 for docking with the above.
So.... I am actually looking forward to returning to work Monday now. LOL. Mission accomplished. The Bluetooth keyboard and notebook case were on my lost but no one has then in stock yet to examine. The two Belkin cases were very nice and high quality, but they both add considerable mass. And most importantly require more than 1 step to remove the Tab for docking. That is not desirable to me as over time it makes the safe guards that keep the tablet from falling out of the less effective.
I hope this is helpful. I know there are a few other review and comments about the two docks. But I wanted to give more of a 'my personal setup' perspective to my review as well as share why personally a stable and pimped out tablet is so important to me right now.
Enjoy and let me know of you have any questions or comments.
Sent from my GT-P7510 using Tapatalk
djchad72 said:
3) Samsung Wall Charger - Just like the one included with the tablet. Same length and module wall plug. Will use with Media dock while included plug will stay at home with Keyboard Dock. I've learned my lesson with non OEM chargers... they can damage your battery and its ability to hold charge. So I am drawn to OEM plugs or certified by OEM partners. But honestly $50 for a 3ft cable and wall plug? Even the Apple chargers are less than that. But no alternatives mean I pay the price.
Click to expand...
Click to collapse
There are plenty of alternatives. A solder blob and a resistor turns an iPad charger into a Tab 10.1 charger. There's also a good possibility that a kernel tweak will allow the Tab 10.1 to use unmodified iPad chargers (I just need to find if there are separate ADC channels for D+ and D-)
There is NO reason why any iPad charger could damage the Tab - USB is USB is USB, 5 volts is 5 volts is 5 volts. Samsung's weird detection resistors violate the USB Battery Charging standard (so do iDevices for that matter), and it is purely a racket to milk money from users.
Your views on OEM chargers are archaic and date back to the days when dumphones were so dumb that charge control intelligence was in the charger/power supply and not in the phone itself. This hasn't been valid for 95%+ of phones for years, and isn't valid for 99% of the devices that are discussed here on XDA, if any. These days, if a battery in a smartphone or tablet gets damaged by improper charging, the device itself and only the device is to blame, because all charge control intelligence has been moved into the device.
I disagree. I bought non standard non OEM wall charger and cables for a Palm Pre. That was only 2 years ago. It fried both batteries and my battery charger pack. The batteries would degrade quickly upon operation and random reboots crept up. Techs examined the batteries and they tested bad. They had to replace.
I know there are 3rd party makers that can be trusted. But in the end the OEM and end user is going to only take so much before replacement get bothersome.
Sent from my GT-P7510 using Tapatalk
The only thing I can think of there is that the charger was weak and browned out, potentially confusing the phone's charging circuit.
Either that or the charger was SERIOUSLY defective. I'll be honest - before using a charger I do check that it is at least regulating to around 5 volts, so far I haven't had any surprises. The only surprise I've had were Monoprice "1A" chargers that were really only capable of 400-500 mA.
An iPad charger with the charging resistors tweaked so that D+ and D- are around 1.2 volts will be indistinguishable from the real deal for our tabs.
This dock looks perfect. Case compatible, data sync, mhl support and spare battery charger. Looks really solid too. Anyone have any experience with Kidigi products?
http://www.kidigi.com/product_lv2.php?pid=1397
http://www.youtube.com/watch?v=5CyW5RSdjb0&hd=1
It's on Ebay for $23.
http://www.ebay.com/sch/i.html?_nkw...sacat=0&_odkw=kidigi+dual+desk+dock&_osacat=0
OK, I was a little skeptical up until he pulled out the little cradle to allow for docking the S3 with a case on... I love that design. That sold me right there.
Nice find. Ordered placed. Needed a new charger for my QCell anyways.Hopefully it actually fully charges my backups... lol
Just ordered one as well. Had one for my Note and really liked it. Too bad it doesn't work with my S3.
Thanks OP!
Sent from my GT-I9300 using xda premium
Specifications:
● Net Weight: 118g
● Dimension: 75 x 75 x 50 mm
● INPUT: DC 5V/1000mA - USB 5V/500mA
● OUTPUT: USB: DC 5V/500mA - BATTERY: DC 4.2V/500mA
Click to expand...
Click to collapse
really? a dock that doesn't provide 1000mA to the phone? sad.
(also i doubt they have MHL ability.. because that does not look like an 11 pin connector. they are slightly different to reach the MHL pins.)
scarrmrcc said:
really? a dock that doesn't provide 1000mA to the phone? sad.
(also i doubt they have MHL ability.. because that does not look like an 11 pin connector. they are slightly different to reach the MHL pins.)
Click to expand...
Click to collapse
On the youtube video, the ac adapter is shown, and the writing says it is 1500mA. I think it only provides 500ma to the spare batt charger, if it is like other spare batt chargers I have seen. 500mA for the phone will barely keep up with general use. I would be interested to see what real world use is for charge times both in phone and spare battery.
Its a damn good dock, just ordered of amazon for £15 inc P&P which works out £5 cheaper than mobilefun and if you want next day (1-2days) its just under £20 so still cheaper. 500A is not an issue for me as i only plan to keep the phone docked (compared to leaving the phone flat not charging) so not too bothered about the charge but do like the idea of it being able to charge a spare battery.
So does that mean that the dock can output only 500 mA or that the charger that comes with it can only output that much? Can't we just use our stock charger that outputs 1000 mA with the dock or is that not how it works?
clankfu said:
So does that mean that the dock can output only 500 mA or that the charger that comes with it can only output that much? Can't we just use our stock charger that outputs 1000 mA with the dock or is that not how it works?
Click to expand...
Click to collapse
According to the specs, no matter what adapter you use (theirs is 1500mah) you only get 500.
Sent from my SCH-I535 using xda app-developers app
Well, that's a bummer. That means double the charging time?
clankfu said:
Well, that's a bummer. That means double the charging time?
Click to expand...
Click to collapse
Find out when it arrives i guess, but it realy doesnt effect me much if it takes longer to charge aslong as it charges both to 100%. I get through a whole day easily enough and ill be using this to charge overnight as I sleep so.
Mine should be getting here on Friday so I'll post a review once I put it through its paces.
I ordered a white one couple days ago too. Be here any day now. Will let u know too
Sent from my SPH-L710 using xda premium
Kidigi products are really good and I have one on the way for review. Pics and full review on my site soon. Follow me on twitter for updates.
Sent from my HTC One X using Tapatalk 2
Looks like mine is getting here a day early so I'll get it sometime today.
I wasn't expecting to receive mine until tomorrow, but it arrived today.
I'm unable to take any pics atm, but when I get my backup phone back from my buddy tomorrow night Ill be able too. He needed an unlocked phone for his trip to Israel so I loaned him my POS Focus.
For now I will say that my GS3 with a Gimmick Five Triobump BARELY fits, but it does fit and charges fine. The bottom curvature with the little slot removed is just slightly off from the curve of the bumper. I can slide the phone with case in and with a little pressure it sits perfectly, however if you move the dock around too much the device will be pushed up ever so slightly causing it to disconnect from the USB port. A light tap on the top of the phone and it'll sit right again.
Ill find out tonight how well it actually charges my phone since it was already at 100% when I received the dock. Now as for the battery compartment in the back, it stopped charging my QCell 2300 @90% sadly. Ill see if this trend continues after a few charge cycles. /crosses fingers
The content of my package consisted of the dock itself, a us DC adapter and 1 USB-micro cable not 2 and the dock only has 1 micro USB port so you have to choose to connect to the DC adapter or to your PC not both unless I'm really stupid and overlooked a 2nd port. I was under the impression that I would be able to have the dock plugged in with the DC charger while also running a USB from the dock to a PC or other device for syncing. Nope, Guess not...
I don't have much more to say at the moment. Gimme a couple days with it and we'll see.
msgnyc said:
I wasn't expecting to receive mine until tomorrow, but it arrived today.
I'm unable to take any pics atm, but when I get my backup phone back from my buddy tomorrow night Ill be able too. He needed an unlocked phone for his trip to Israel so I loaned him my POS Focus.
For now I will say that my GS3 with a Gimmick Five Triobump BARELY fits, but it does fit and charges fine. The bottom curvature with the little slot removed is just slightly off from the curve of the bumper. I can slide the phone with case in and with a little pressure it sits perfectly, however if you move the dock around too much the device will be pushed up ever so slightly causing it to disconnect from the USB port. A light tap on the top of the phone and it'll sit right again.
Ill find out tonight how well it actually charges my phone since it was already at 100% when I received the dock. Now as for the battery compartment in the back, it stopped charging my QCell 2300 @90% sadly. Ill see if this trend continues after a few charge cycles. /crosses fingers
The content of my package consisted of the dock itself, a us DC adapter and 1 USB-micro cable not 2 and the dock only has 1 micro USB port so you have to choose to connect to the DC adapter or to your PC not both unless I'm really stupid and overlooked a 2nd port. I was under the impression that I would be able to have the dock plugged in with the DC charger while also running a USB from the dock to a PC or other device for syncing. Nope, Guess not...
I don't have much more to say at the moment. Gimme a couple days with it and we'll see.
Click to expand...
Click to collapse
I got mine today too, like you I was surprised there wasn't another usb port, but looking at the youtube video there really is only one port. My spare battery also stopped charging at around 93%, I think it may be due to the protection circuit in there. In terms of charging, I had it plugged in with usb and it charged my s3 from 40% to 100% in about 2 hours, but bearing in mind that I was also charging another battery in the second slot. I think charge times are good given that the USB max is 500mA, the thing I am wondering about is that the ac adaptor that comes with it has a output of 1500mA (even 500mA more than the samsung supplied one), I haven't tested it as both my batteries are full atm but ill let you know whether the charging via ac adaptor reduces the charge time by a third.
Interestingly enough, my phone now sits in the dock PERFECTLY with the triobump on. It sit in there nice and snug. Doesn't pop loose anymore if I jostle it around. Very nice
Just for reference, took about 50min to bring my QCell 2300 from 61% to fully charged using the DC adapter. No secondary battery chargin.Just the phone. Not a very heavy battery use day today. I was actually busy at work... lmao
polesp said:
I got mine today too, like you I was surprised there wasn't another usb port, but looking at the youtube video there really is only one port. My spare battery also stopped charging at around 93%, I think it may be due to the protection circuit in there. In terms of charging, I had it plugged in with usb and it charged my s3 from 40% to 100% in about 2 hours, but bearing in mind that I was also charging another battery in the second slot. I think charge times are good given that the USB max is 500mA, the thing I am wondering about is that the ac adaptor that comes with it has a output of 1500mA (even 500mA more than the samsung supplied one), I haven't tested it as both my batteries are full atm but ill let you know whether the charging via ac adaptor reduces the charge time by a third.
Click to expand...
Click to collapse
Same here. Just charged my phone from 41% to 100% in about 2 hours. I can live with that. Don't have a spare battery yet so I haven't had a chance to try that out yet. And the my S3 with a Cruzerlite TPU case fits perfectly in the cradle.
I'm using the stock S3 AC adapter and usb cable btw.
just to let everyone know, charging with the supplied ac adaptor is 2.5x faster than using usb, the only issue being is that the supplied usb cable is a bit short, so ill have to buy a bigger one
polesp said:
just to let everyone know, charging with the supplied ac adaptor is 2.5x faster than using usb, the only issue being is that the supplied usb cable is a bit short, so ill have to buy a bigger one
Click to expand...
Click to collapse
By "supplied ac adapter", you mean the one that came with the Kidigi dock right? Can't you just plug the S3 usb cable into that?
I had the tilted wireless charger already (link bellow) but decided to get the official wireless charger as well.
http://forum.xda-developers.com/showthread.php?t=2611246
Of course its a lot better made then the Chinese charger but is it better in usability and charging speed?
With the Chinese charger I was using the stock nexus charger and cable because they are much better then the cables that came with the charger, more detail in the link bellow
http://forum.xda-developers.com/showpost.php?p=50254993&postcount=116
The info you need to know is that the OEM nexus charger and cable put out about 1000-1100mA while the same cable paired with a samsung 2a block was able to push past 1600mA but not keep it there, leveling out at 1200mA. The OEM block and cable with Chinese charger puts out between 650mA and 730mA
So how does the official Nexus charger compare?
Well to start I tested the new cable with the OEM block and it was putting out just over 1100mA, so we know the cable is better then the OEM cable. Then I tested the new cable with the block that comes with it and got a steady 1600mA and it didnt drop. Now the block itself doesn't say anything on it as to what it puts out, but the charger base says 1.8a, is that what the block puts out? Regardless the block is much better then the Samsung 2a block.
I don't use a case so the phone on the charger itself puts out only a little bit more then Chinese charger keeping a steady 768mA. Now it can drop below and above that number but it really likes 768mA. So while it does have a great cable and block, if all you care about is speed then charger itself is a little faster but not by much compared to the Chinese charger.
As far as usability, I cant get the nexus charger to miss. I can throw it on and it connects every time. With the Chinese one it didn't always connect and i had to make sure i got it in the right spot and make sure, even if I heard the noise, that it didn't disconnect and was actually charging. With the nexus charger I feel confident that the magnets are lining it up and it gets a good connection every time.
As and added bonus, I have heard a lot about how you could possibly charge while vertical attached to a wall. I decided to try this and I can attest that the weak link will be the charger holding the wall not the charger holding the phone, as long as you don't use a case like me. The magnets are more then strong enough to hold the phone vertically, in fact they are more then strong enough to hold it upside down, I tried! The pad that sticks to the surface is just as strong as I've been hearing as well. I literately just slapped it on the wall and then threw the phone up and its holding thus far. I have it only a few inches above my night stand and will update if it falls, but so far it has held up to me taking the phone off and on about 50 times with no issue. I'm not sure how it would hold up as a car mount, only because I don't know how the sticky part of the base would hold up to extreme hot and cold. I image it would probably fall, especially if completely vertical.
I would definitely recommend the Nexus charger over a Chinese one. I you have the $50 then its a no brainier, it was even a couple bucks cheaper then that on amazon and my prime membership got it here on Monday when i ordered on Saturday afternoon. If you only have $13 bucks and don't mind waiting 3 or more weeks then Chinese one charges almost as fast.
I too finally went from the orb to the new charger because I wanted a vertical mount. I'm blind as a bat with my contacts out and wanted to be able to see the time on my phone while in bed. With the orb, the angle was bad and my nightstand is taller than my mattress, making it hard to see. So I got the new charger, put it on the side of my nightstand and it's holding just fine. Holds the phone great too and now I can see the time on my phone. As long as you can get a smooth, flat surface, I don't see why mounting vertically would be an issue.
Sent from my Nexus 5 using XDA Premium 4 mobile app
just wanted to say, it did end up falling off the wall the 2nd night while charging, the charger from the wall, not the phone from the charger. A good sized piece of 3m double sided tape right in the middle of the charger fixed that and I've had no problems since.
Charger in use
Can you advise please if the Google charger cuts out once the phone has reached 100% or does it change to a trickle charge? Looking at some of the alternatives (e.g. on Amazon) I haven't found any that automatically cut out at 100% although a few mention about changing to a trickle charge. What's your experience in this regard?
S
[Nexus 5 about to be delivered]
I bought the official one and I must say that I'm very pleased with my purchase, Is there any apps which can detect the charging voltage so i may test my charger as well?
zubsz said:
I bought the official one and I must say that I'm very pleased with my purchase, Is there any apps which can detect the charging voltage so i may test my charger as well?
Click to expand...
Click to collapse
If you're root, can use Android tuner from play store!
Tapatalked with my Nexus5(aka the Hammerhead)
Hi guys,
I can see in the UK it costs £34.99 but how much is the delivery charge?
Thanks,
M
how long takes to make a fully charge?
xupthree60 said:
I had the tilted wireless charger already (link bellow) but decided to get the official wireless charger as well.
http://forum.xda-developers.com/showthread.php?t=2611246
Of course its a lot better made then the Chinese charger but is it better in usability and charging speed?
With the Chinese charger I was using the stock nexus charger and cable because they are much better then the cables that came with the charger, more detail in the link bellow
http://forum.xda-developers.com/showpost.php?p=50254993&postcount=116
The info you need to know is that the OEM nexus charger and cable put out about 1000-1100mA while the same cable paired with a samsung 2a block was able to push past 1600mA but not keep it there, leveling out at 1200mA. The OEM block and cable with Chinese charger puts out between 650mA and 730mA
So how does the official Nexus charger compare?
Well to start I tested the new cable with the OEM block and it was putting out just over 1100mA, so we know the cable is better then the OEM cable. Then I tested the new cable with the block that comes with it and got a steady 1600mA and it didnt drop. Now the block itself doesn't say anything on it as to what it puts out, but the charger base says 1.8a, is that what the block puts out? Regardless the block is much better then the Samsung 2a block.
I don't use a case so the phone on the charger itself puts out only a little bit more then Chinese charger keeping a steady 768mA. Now it can drop below and above that number but it really likes 768mA. So while it does have a great cable and block, if all you care about is speed then charger itself is a little faster but not by much compared to the Chinese charger.
As far as usability, I cant get the nexus charger to miss. I can throw it on and it connects every time. With the Chinese one it didn't always connect and i had to make sure i got it in the right spot and make sure, even if I heard the noise, that it didn't disconnect and was actually charging. With the nexus charger I feel confident that the magnets are lining it up and it gets a good connection every time.
As and added bonus, I have heard a lot about how you could possibly charge while vertical attached to a wall. I decided to try this and I can attest that the weak link will be the charger holding the wall not the charger holding the phone, as long as you don't use a case like me. The magnets are more then strong enough to hold the phone vertically, in fact they are more then strong enough to hold it upside down, I tried! The pad that sticks to the surface is just as strong as I've been hearing as well. I literately just slapped it on the wall and then threw the phone up and its holding thus far. I have it only a few inches above my night stand and will update if it falls, but so far it has held up to me taking the phone off and on about 50 times with no issue. I'm not sure how it would hold up as a car mount, only because I don't know how the sticky part of the base would hold up to extreme hot and cold. I image it would probably fall, especially if completely vertical.
I would definitely recommend the Nexus charger over a Chinese one. I you have the $50 then its a no brainier, it was even a couple bucks cheaper then that on amazon and my prime membership got it here on Monday when i ordered on Saturday afternoon. If you only have $13 bucks and don't mind waiting 3 or more weeks then Chinese one charges almost as fast.
Click to expand...
Click to collapse
Have you considered using this charger in the car? From what you're saying, the hold issue seems to be the charger itself. Using double sided 3m thick tape may solve the issue.
The reason I'm curious is because I and many other previous Palm Pre users used to use the touchstone wireless charger in their cars and the phone never fell of even on extreme bumps. It was great being able to simply place the Pre on the charger and if you were lucky you could put the touchstone right in your line of sight (I have an 06 civic so the touchstone fit right next to the steering wheel, to the right. Look at my profile pic or do a search for palm Pre wireless charging in the car and you'll come up with hundreds of results and pics).
Do you think the charger's internal magnets would be strong enough to hold the nexus 5 in place while driving? Right now, I still use the touchstone as a place holder for my 5 as the internal metal discs on the 5 line up nicely with the internal magnets in the touchstone. I did modify the touchstone slightly and added magnets every 90° starting at the 45° position and then the other 3 were 90°apart from the initial magnet. I'll try to post a pic or a video of what I mean. The touchstone is not a qi charger so it doesn't charge but it certainly makes for a super convenient spot for the phone to be especially when using navigation. Also the nexus has not fallen once while driving over some pretty harsh bumps.
What do you think?
Sent from my wondrous Nexus numeral 5
VOLTAGEROCK said:
Have you considered using this charger in the car? From what you're saying, the hold seems to be the charger itself. Using double sided 3m thick tape may solve the issue.
The reason I'm curious is because I and many other previous Palm Pre users used to use the touchstone wireless charger in their cars and the phone never fell of even on extreme bumps. It was great being able to simply place the Pre on the charger and if you were lucky you could put the touchstone right in your line of sight (I have an 06 civic so the touchstone fit right next to the steering wheel, to the right. Look at my profile pic or do a search for palm Pre wireless charging in the car and you'll come up with hundreds of results and pics).
Do you think the charger's internal magnets would be strong enough to hold the nexus 5 in place while driving? Right now, I still use the touchstone as a place holder for my 5 as the internal metal discs on the 5 line up nicely with the internal magnets in the touchstone. I did modify the touchstone slightly and added magnets every 90° starting at the 45° position and then the other 3 were 90°apart from the initial magnet. I'll try to post a pic or a video of what I mean. The touchstone is not a qi charger so it doesn't charge but it certainly makes for a super convenient spot for the phone to be especially when using navigation. Also the nexus has not fallen once while driving over some pretty harsh bumps.
What do you think?
Sent from my wondrous Nexus numeral 5
Click to expand...
Click to collapse
Been using the official Qi charger in the car daily, with this set up: http://forum.xda-developers.com/goo...es/kenu-airframe-n5-wireless-charger-t2573184. Perfect solution.
I know it's lazy, but thoughts? It's 1000 mA
I've never had wireless charging before and always told myself that my next phone would have wireless charging...
Intsun® Universal QI Wireless Charging Receiver film for micro-USB of All Android Mobile (Narrow-Interface Down) by Intsun http://www.amazon.com/dp/B00JIN22JM/ref=cm_sw_r_udp_awd_dlEXtb1VYP476
Sent from my One XL using Tapatalk
That one I believe is rated as 500mA so it's going to take a long time to charge. A 750mA one is better, but it will be thicker as well and the microUSB on them are shoddy. I would like it if someone knows the exact location of the +5V and Ground solder point on the mother board, that would be the best solution.
http://www.amazon.com/Universal-Wir...TF8&colid=3OC2TRSSGA72P&coliid=I1NLS41WJ2XY3W
This one looks like the same thing. Both say "Charging current: DC 5V/500mA-1000mA" but I wouldn't expect anything over 500mA. I ordered one anyway even though my case won't be here for another week.
interesting, if it is possible to "install" it under the back cover.!?
I wonder how long the OnePlus One will take at 500mA. I ordered the same one with "500-1000". Waiting on my case to arrive so I can actually use it.
Hilbe said:
I wonder how long the OnePlus One will take at 500mA. I ordered the same one with "500-1000". Waiting on my case to arrive so I can actually use it.
Click to expand...
Click to collapse
I was going to make a thread today on this but I can confirm that most of these are actually 500mA regardless of what it says in the description. I already received the case I ordered from Amazon so I put it all together yesterday and it all plays nicely. You obviously loose the usb port but that's why I did all my rooting and unlocking first. It's plastic so it will likely not damage the usb port on the phone. I have not tested the charge time, will try today and let everyone know.
Originally I was thinking of putting the receiver behind the actual phone backing. Decided against it because you never know if you need the usb port. Also, I hate the feel of the back of the phone and much prefer the case.
If someone can identify the pins to make a direct connection, that would be great but for now it works!
funCrash93 said:
interesting, if it is possible to "install" it under the back cover.!?
Click to expand...
Click to collapse
Read my thread here about how I soldered on internally. http://forum.xda-developers.com/oneplus-one/general/internal-wireless-charging-t2819398
The one that I purchased was rebranded as 750mA, but on the original sticker under the one put over it it says it's rated for 1000mA. I have a couple of the black ones OP is talking about and they don't provide enough juice to even reliably charge the one. Check out my thread above and the link to my original post on the opo forum. I have a link to the one I purchased on ebay there that worked the best for me.
@inaudible101 - what tools did you use to remove the back cover?
At 500mA, it should take about 6 hours to charge a battery at around 5%. This assumes that you are getting the full 500mA, too, not less.
AJ RIMMER! said:
@inaudible101 - what tools did you use to remove the back cover?
At 500mA, it should take about 6 hours to charge a battery at around 5%. This assumes that you are getting the full 500mA, too, not less.
Click to expand...
Click to collapse
Yeah I tried a 500mA one and it just didn't cut it. The 1000mA one works much better. I may hook it up to my multimeter just to see what the real output is for my own sake. I used a pocket knife to get the corner up and then slid my thumb nail under and the hooks pop off easily. They have a video on their website showing that you can push on the back with your thumb and then just pry the bottom but I'm not sure how well that works.
Guys, what receiver do you have and how much does it really output? On mine it says 500 mAh but in reality it only has an average of 300 mAh. I measured this with Battery Monitor Widget.
This is my receiver: http://www.aliexpress.com/item/Univ...less-Charging-Receiver-Module/1973302276.html
Has anyone found a 1000ma version?
Is it safe to leave the receiver plugged in even if i'm not charging it, like would it damage my usb port?
Cause I just ordered one for my OPO and a wireless charger from aliexpress.
This is the external battery that everybody should have! No need to have any cables or wall adapters with this one!! I’ll explain later.
When you open the box, you are first greeted with a “Thank you for your purchase!” card. Beneath that is the battery in a plastic wrap. The entire battery is in a plastic molding. Once you pick up the battery and plastic molding, you find a warranty card, an instruction manual, a micro-USB to mini-USB adapter, and a micro-USB to Samsung pin adapter. You also find a 2-ft long micro-USB cable and a neat carrying pouch. The carrying pouch is so great, you’ll love it as soon as you touch it.
First Impressions: It feels REALLY nice in your hands. It feels so premium and high-quality. The product has a really nice matte-finish with a brilliant black color. I fell in love with it immediately. It has a built-in wall charger to charge the unit, so no need to carry an extra wall adapter. Also, it has a built-in micro-USB cable, so you also don’t have to carry a cable with you. If you want to charge another device, there is a port at the bottom that is covered with a flap that you can easily access to charge your second device. You just plug in the wire and plug it into your phone and BAM: it’s charging. The built-in micro-USB cable charges at 2.1A and the port at the bottom outputs at 1A. The battery has a button in which you press to have four LED lights light up that tell you how much power the battery has left.
After using the battery for some time, I noticed that if you pick it up with oily hands, the battery will get oily stains. You can easily wipe them off, but it is just a little heads-up. I like how it is scratch-free; that is a huge plus. When you plug in your device with the cable that is built-in, it is a little awkward stacking your device on the battery at first because you’re afraid of breaking it. Eventually you get passed that, but it is a small complaint. After the cable is bent a certain way for a while, it forms to that shape. Luckily, when you put the cable back in the battery, it is formed back to its straight shape. In other words, the cable is malleable. I like how they’ve packed in 9000mAh in such a small form factor. I don’t like how big it is, but I can’t complain since it has a built-in wall charger AND micro-USB cable! This battery is pretty great!
Recently I’ve been loving this over my other batteries because I can just throw this in pocket and I’m good to go. No need to carry anything else to use the battery or to charge the battery. This would be great for students, people that work, just about anybody that owns a phone or tablet!
Overall, this battery is awesome! The fact that the wall charger and micro-USB cable is built into the battery is awesome. Along with the fact that it has an amazing build quality and form factor, it’s pretty awesome! I highly recommend this if you want a battery but don’t want to carry so many extra things around with it.
I was provided a unit for testing purposes and I promised to provide a completely honest and fair review.
Unfortunately, I cannot post the link to this product on Amazon because posting commercial links is forbidden, but you can find it on Amazon by searching for the product's name that is in the title of this thread. Thanks!