Develop Bugs

TUTORIAL How to revert back to ICS after upgrading to Jelly Bean

Hi folks,
So, you wanna try the JB leak but want to use ICS after that? Yes, it's possible. Even if you upgraded your HBOOT. And quite simple.
1. First, make a full nandroid backup of your favourite ICS ROM.
2. Then follow the instructions provided by the JB-chefs.
3. Testdrive the JB ROM
4. Reboot your phone into recovery
5. Restore your nandroid backup
6. Reboot your phone
7. if there's a bootloop, then boot bootloader, then recovery and flash the boot.img provided by your ICS ROM-chef.
And that's all. I did this and it's working. Hope that helps other users as well.

lukacs.attila said:
Hi folks,
So, you wanna try the JB leak but want to use ICS after that? Yes, it's possible. Even if you upgraded your HBOOT. And quite simple.
1. First, make a full nandroid backup of your favourite ICS ROM.
2. Then follow the instructions provided by the JB-chefs.
3. Testdrive the JB ROM
4. Reboot your phone into recovery
5. Restore your nandroid backup
6. Reboot your phone
7. if there's a bootloop, then boot bootloader, then recovery and flash the boot.img provided by your ICS ROM-chef.
And that's all. I did this and it's working. Hope that helps other users as well.
Click to expand...
Click to collapse
What about the hboot no downgrade and no worries about that ?
Sent from my GT-I9100 using xda app-developers app

sharjackmission said:
What about the hboot no downgrade and no worries about that ?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
No the problem is that when you brick your device going to the new hboot there is no way back. There is no RUU with JB !
Verstuurd van mijn HTC One X

MarcelHofs said:
No the problem is that when you brick your device going to the new hboot there is no way back. There is no RUU with JB !
Verstuurd van mijn HTC One X
Click to expand...
Click to collapse
Indeed. But if you do exactly what the tutorial says, and follow the devs instructions, it's hard to brick your phone. Though it's possible...
Anyway, it's up to you... You should take the risk, or sit back, relax, and wait for the official JB RUU.

How to go back 2 ics from l8 jb rom with hboot 1.28
MarcelHofs said:
No the problem is that when you brick your device going to the new hboot there is no way back. There is no RUU with JB !
Verstuurd van mijn HTC One X
Click to expand...
Click to collapse
try read what the op write here it is
So, you wanna try the JB leak but want to use ICS after that? Yes, it's possible. Even if you upgraded your HBOOT. And quite simple
--------------------------------------------------------------------------
how do i go back from latest HBOOT 1.28**
what u need to do is
make an nandroid backup
before upgrade
if u want to go back just flash ur nandroid backup
BUT U NEED TO FLASH THE BOOT.IMG THERE COMES WITH THE ICS ROM
OTHERWISE U WONT GET ANY NETWORK
i have just try the l8 from baad an must say didnt like it so went back to my ics
an it works
updated the hole packet
an go back no problem

-fluffy- said:
try read what the op write here it is
So, you wanna try the JB leak but want to use ICS after that? Yes, it's possible. Even if you upgraded your HBOOT. And quite simple
Click to expand...
Click to collapse
Hi Fluffy
I've updated the Hboot to 1.23.0000 and I didn't find a way yet to go back. Any help?
Cheers

dude010 said:
Hi Fluffy
I've updated the Hboot to 1.23.0000 and I didn't find a way yet to go back. Any help?
Cheers
Click to expand...
Click to collapse
if u have done like the OP wrote
wiht a nandroid backup then u shut be able to go back to ur old rom by flashing ur backup

works perfect! Thank You

HI
I get a big issue!
First of all thanks for your post!
2ndly, I got a One X with S-Off yep lucky man!
But here is my issue:
I succeed in installing the Maximus custom rom And I am s-off so this is cool, but I have forget to use the update script.
So I decided to create a new zip with this update and flash it with the recovery!
But the flash aborted!
Once again, same result!
Then I say... Hum something wrong, I tried with the original custom rom.zip from Football! The installation aborted once again!
So I try to relock the bootloader (fastboot oem lock) succeed
Flash the PJ46IMG.zip (fastboot flash zip PJ46IMG.zip)
Unlock the bootloader (fastboot flash unlocktoken Unlock_code_OneX.bin , I changed the name)
But since this moment my phone can't use fastboot command...
I have restarted the phone and no usb detection from the computer :s
and I try with fastboot usb: fastboot devices
Nothing
fastboot flash zip recovery.zip (waiting for device)
recovery and there is a phone with blue triangle!
I tried to use a RUU, but the phone is not detected by USB, so it doesn't succeed!
Then I do a factory reset... still nothing :s
I am locked with S-Off and can't use fastboot!
Do you have any idea about how I can do something???
Thanks for all your answers!
Flow.

Flow-Wolf said:
HI
I get a big issue!
First of all thanks for your post!
2ndly, I got a One X with S-Off yep lucky man!
But here is my issue:
I succeed in installing the Maximus custom rom And I am s-off so this is cool, but I have forget to use the update script.
So I decided to create a new zip with this update and flash it with the recovery!
But the flash aborted!
Once again, same result!
Then I say... Hum something wrong, I tried with the original custom rom.zip from Football! The installation aborted once again!
So I try to relock the bootloader (fastboot oem lock) succeed
Flash the PJ46IMG.zip (fastboot flash zip PJ46IMG.zip)
Unlock the bootloader (fastboot flash unlocktoken Unlock_code_OneX.bin , I changed the name)
But since this moment my phone can't use fastboot command...
I have restarted the phone and no usb detection from the computer :s
and I try with fastboot usb: fastboot devices
Nothing
fastboot flash zip recovery.zip (waiting for device)
recovery and there is a phone with blue triangle!
I tried to use a RUU, but the phone is not detected by USB, so it doesn't succeed!
Then I do a factory reset... still nothing :s
I am locked with S-Off and can't use fastboot!
Do you have any idea about how I can do something???
Thanks for all your answers!
Flow.
Click to expand...
Click to collapse
Wow this sounds tricky.Have you tried moving to a different computer to see if it works there?

Try reinstalling Android sdk drivers, the lot, on your PC.
Sent from my HTC One X using xda app-developers app

Can you flash any other rom based on ICS or other AOSP JB Roms with a ICS kernel like IceColdJelly?
Is the battery life better with the new hboot?

BlueJack22 said:
Can you flash any other rom based on ICS or other AOSP JB Roms with a ICS kernel like IceColdJelly?
Is the battery life better with the new hboot?
Click to expand...
Click to collapse
You should be able to revert to an ICS rom on the new hboot (reflash ICS boot.img and then restore nandroid backup) but apparently the AOSP roms don't work. Users on the new hboot and JB roms do comment that the battery life is much improved.

ClydeB1 said:
You should be able to revert to an ICS rom on the new hboot (reflash ICS boot.img and then restore nandroid backup) but apparently the AOSP roms don't work. Users on the new hboot and JB roms do comment that the battery life is much improved.
Click to expand...
Click to collapse
AOSP didn't work
flash aosp with the boot.img from rom -> stuck at HTC logo
flash aosp with the boot.img from 4.1.1 sense rom -> stuck at boot animation

Arthas92 said:
AOSP didn't work
flash aosp with the boot.img from rom -> stuck at HTC logo
flash aosp with the boot.img from 4.1.1 sense rom -> stuck at boot animation
Click to expand...
Click to collapse
Use a boot.img from insertcoin jb rom, and aosp wil work.
Grtz Rongogo

Arthas92 said:
AOSP didn't work
flash aosp with the boot.img from rom -> stuck at HTC logo
flash aosp with the boot.img from 4.1.1 sense rom -> stuck at boot animation
Click to expand...
Click to collapse
That's exactly what my post said :cyclops: although per post above this one it can work with IC.

Rongogo said:
Use a boot.img from insertcoin jb rom, and aosp wil work.
Grtz Rongogo
Click to expand...
Click to collapse
What version of insertcoin you try?
did you repack with old kernel?

mdeejay have made a boot.img work with new Hboot
still have bug but it work quite good
http://forum.xda-developers.com/showthread.php?p=32486421#post32486421

Need againto UNLOCK, you can use the FASTBOOT command!

cxhhappy said:
Need againto UNLOCK, you can use the FASTBOOT command!
Click to expand...
Click to collapse
Yes, to unlock the bootloader you use the cmd: fastboot flash unlocktoken Unlock_code.bin using the same unlock file you used the first time you unlocked.

TWRP wont flash Roms Help

hey guys not sure what im doing wrong but everytime i try to flash a rom in twrp v2.3.1.0 it fails. it always says error flashing zip. and idk what to do. the phone is rooted and bootloader unlocked but idk why it isnt flashing the roms. any help is greatly appreciated.

Do all flashes fail? try flash something else.

Nazz45 said:
hey guys not sure what im doing wrong but everytime i try to flash a rom in twrp v2.3.1.0 it fails. it always says error flashing zip. and idk what to do. the phone is rooted and bootloader unlocked but idk why it isnt flashing the roms. any help is greatly appreciated.
Click to expand...
Click to collapse
you need to have the recovery.img file and the SDK set correctly on your system, do the following:
Code:
fastboot erase recovery
Code:
fastboot flash recovery path/to/recovery.img

matt95 said:
you need to have the recovery.img file and the SDK set correctly on your system, do the following:
Code:
fastboot erase recovery
Code:
fastboot flash recovery path/to/recovery.img
Click to expand...
Click to collapse
He's asking why flashing ROMs fail WITHIN recovery, which then you can assume that he already got recovery working.

tomascus said:
He's asking why flashing ROMs fail WITHIN recovery, which then you can assume that he already got recovery working.
Click to expand...
Click to collapse
oh sorry, didn't get the post... my fault :good: however i suggest to install CWM cause pretty much every rom need that recovery to be installed correctly...

matt95 said:
oh sorry, didn't get the post... my fault :good: however i suggest to install CWM cause pretty much every rom need that recovery to be installed correctly...
Click to expand...
Click to collapse
I agree, but make sure you actually have the international One X and not the Evita dual core firstly..

tomascus said:
I agree, but make sure you actually have the international One X and not the Evita dual core firstly..
Click to expand...
Click to collapse
Yeah, I'm assuming that you have the international one X...

matt95 said:
oh sorry, didn't get the post... my fault :good: however i suggest to install CWM cause pretty much every rom need that recovery to be installed correctly...
Click to expand...
Click to collapse
Not true. I've been using TWRP for around a year now on various devices and haven't one had a single problem flashing anything. It's better than cwm in every way

Michealtbh said:
Not true. I've been using TWRP for around a year now on various devices and haven't one had a single problem flashing anything. It's better than cwm in every way
Click to expand...
Click to collapse
it depends on points of view i've nothing against TWRP, i use it on my Transformer and it is pretty good, better layout and view of the raw CWM but on the HOX i prefer using the CWM, i would love to see a port of the best recovery out there, the 4EXT

It is the Evita version, on ATT. I decided to RUU it and start from scratch. this time however i am going to use Hasoon2000's all in one kit instead of the traditional method. ill post an update in a little bit to see if the roms will successfully flash second time around

Ok so after re unlocking the bootloader and re rooting the phone. TWRP v2.3.1.0 still fails to flash roms. which doesnt make sense because it was able to flash superuser. does anyone have an explanation for this or do i have to flash CWM?

Update: was able to successfully flash CM10. must have just been those particular ROMs.

Nazz45 said:
It is the Evita version, on ATT.
Click to expand...
Click to collapse
You might want to check out the EVITA forums, then. This one is for ENDEAVORU.
Advice and software you find here is likely to be wrong.

I know this thread is old but im having EXACTLY the same problem. and i looked in the Evita section and theres nothing. i have the At&t version too but the only rom i can seem to install is cm10. ive re flashed several versions of twrp and still the same thing happens. ive recently s-offed my device and im wondering if thats the reason for my troubles. did relocking and running the RUU solve your problems? can you flash other roms now or still only cm10?

[Q] Correct Boot.img For HBoot 1.39?

First off, sorry for posting here, I'd like to post in the actual rom thread but I don't have 10 posts yet.
I've installed the avatar rom, its getting to the custom splash screen and then freezing.
This is normally a boot.img problem.
The thing is just I've updated my HBoot to 1.39 and I don't know what boot.img files are compatible.
I've flashed several boot.img files from various roms I've used before, but none seem to be working.
The last comment in the avatar thread is this :
If you're on the new hboot you need a special boot.img that is everywhere on the forums.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=37031130&postcount=22
Does anybody have any idea where I can find this boot.img that is everywhere on the forums?
Because I can't find it....

You just flash the boot image from within the Rom zip file?
I do that with every other Rom I've tried. I have no idea if/why that Rom requires a special boot.img.
Sent from my HTC One X using xda app-developers app

ar3na said:
You just flash the boot image from within the Rom zip file?
I do that with every other Rom I've tried. I have no idea if/why that Rom requires a special boot.img.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
Because some ROMs are incompatible with newer hboots.
@OP
See attachment. I am assuming that a modded boot for CM10 does the trick since Avatar is heavily based on CyanogenMod. Let me know if it works.
You must always use the boot.img supplied in ROM.zip. If you flash ROM A and then use boot.img from ROM B, it ain't going to work.
At the moment you need a special boot.img with nearly all 4.1.x AOSP ROMs, with a new hboot version. With 4.2.x ROMs you don't need any tinkering just flash and go.

Thanks for the modded boot.
Yes dude.
It works.
You awesome genius bastard you.

My pleasure!
It might be worth noting that GPS is broken with this boot. No workaround yet, you need to flash an Android 4.2 ROM if you really need to use it.

Haha dude, spent 3 hours trying to get this ONTO my phone.
I think it'll stay for at least a day or two...
Thanks again.

I need help to recover
Hi,
I am new to rooting, I've unlocked my HTC One X, and have backed up the stock rom through the recovery nandroid, I've flashed the Renovate 1.1 ROM, then I've decided to go back to stock ROM, when I've done it I would be stuck on Airplane mode, and this happened when I first tried to flash the renovate without flashing the boot.img that comes with it...when I've flashed the boot.img the problem is solved...so now I need help getting the boot.img file for the backed up stock rom...any ideas where I can start from?

/sdcard/clockworkmod/backup/

THANK YOU!
TToivanen said:
/sdcard/clockworkmod/backup/
Click to expand...
Click to collapse
Thank you mate! I really appreciate your fast and prompt response, I will try it out and feed you back once done.:good:
UPDATE: Perrrrrfect! Thanks a lot bro! it worked and all good now, by the way I know its not the right place, but whats your favorite ROM?

Viper X

Mr Hofs said:
Viper X
Click to expand...
Click to collapse
Right but my fav changes every 2 weeks LOL.

Flashoholic !!!

TToivanen said:
Because some ROMs are incompatible with newer hboots.
@OP
See attachment. I am assuming that a modded boot for CM10 does the trick since Avatar is heavily based on CyanogenMod. Let me know if it works.
You must always use the boot.img supplied in ROM.zip. If you flash ROM A and then use boot.img from ROM B, it ain't going to work.
At the moment you need a special boot.img with nearly all 4.1.x AOSP ROMs, with a new hboot version. With 4.2.x ROMs you don't need any tinkering just flash and go.
Click to expand...
Click to collapse
hi ...
i have question..?
i have e same issue. after installing the custom rom wi-fi was switched on... than i booted your modded-boot.img.
now wen i opening the phone showing HTC QUIETLY BRILLIANT than not going...
but i can open recovery and installed 4 custom rom, still same....
Please help me.....

medetbek said:
hi ...
i have question..?
i have e same issue. after installing the custom rom wi-fi was switched on... than i booted your modded-boot.img.
now wen i opening the phone showing HTC QUIETLY BRILLIANT than not going...
but i can open recovery and installed 4 custom rom, still same....
Please help me.....
Click to expand...
Click to collapse
You must always use the boot.img supplied in ROM.zip. If you flash ROM A and then use boot.img from ROM B, it ain't going to work.
Click to expand...
Click to collapse
you follow this instruction?

medetbek said:
hi ...
i have question..?
i have e same issue. after installing the custom rom wi-fi was switched on... than i booted your modded-boot.img.
now wen i opening the phone showing HTC QUIETLY BRILLIANT than not going...
but i can open recovery and installed 4 custom rom, still same....
Please help me.....
Click to expand...
Click to collapse
Which ROM?

One X not opening
TToivanen said:
Which ROM?
Click to expand...
Click to collapse
sorry... not wi-fi "airplane mode" was on...i installed custom roms still was the same....
before install custom ROM i didn't backup, I don't now from where get boot.img..?
And what is the ROM A and ROM B?
MY PHONE INFO
HTC ONE X
HBOOT 1.39.0000 s-on
RADIO 5.1204.162.29
CID HTC_j15 (arabia)

[Q] S-Off cm 11

Hello there,
I'm a flash junkie and recently updated my phone to CM11, coming from CM10.
In this process my phone went from S-Off to S-on. Is this always the case? And how can I fix it? Because I don't want to fastboot every time I flash a nightly. Thanks in advance!

liter1 said:
Hello there,
I'm a flash junkie and recently updated my phone to CM11, coming from CM10.
In this process my phone went from S-Off to S-on. Is this always the case? And how can I fix it? Because I don't want to fastboot every time I flash a nightly. Thanks in advance!
Click to expand...
Click to collapse
It is imposible flashing ROM to make the device from S-OFF to S-ON. The rom don't have to do nothing with the HBOOT and can't change the security flag on ONE X international.

Thant said:
It is imposible flashing ROM to make the device from S-OFF to S-ON. The rom don't have to do nothing with the HBOOT and can't change the security flag on ONE X international.
Click to expand...
Click to collapse
Let's hope he can tell us how to get S-OFF in the first place
If he can, I will personally flash as many roms as needed to investigate this unexpected S-ON behaviour.
Sent from my HTC One X using XDA Premium 4 mobile app

I don't think it was s-off in the first place. In my experiences flashing roms and even RUU's has never lead to changing s-on/off status !

Mr Hofs said:
I don't think it was s-off in the first place. In my experiences flashing roms and even RUU's has never lead to changing s-on/off status !
Click to expand...
Click to collapse
Maybe I had Sarcasm-ON

donkyshot said:
Maybe I had Sarcasm-ON
Click to expand...
Click to collapse
I know i was just thinking the OP may have made a small read error somewhere......

donkyshot said:
Maybe I had Sarcasm-ON
Click to expand...
Click to collapse
Sarcasm-ON, hilarious! LOL. How is it possible that on cm10 i could flash roms via cmupdater without flashing the boot.img? Now on cm11 my phone will not start up without the boot.img....
And did someone follow RumRummer tutorial for S-Off? Successfully?
Thanks in advance!

Because cm 11 is kitkat and cm 10 is not. Not all updates require a new boot.img.
If you go to a "new" rom you need to flash the boot.img. if a rom gets an update and it's purely a small software update it may not require a boot.img update.
Cm11 is completely different from cm10.
And rumrunner does not work.

53323599 1174
Mr Hofs said:
Because cm 11 is kitkat and cm 10 is not. Not all updates require a new boot.img.
If you go to a "new" rom you need to flash the boot.img. if a rom gets an update and it's purely a small software update it may not require a boot.img update.
Cm11 is completely different from cm10.
And rumrunner does not work.
Click to expand...
Click to collapse
Mr Hofs, thank you for your answer. It's completely clear now! It's ridiculous htc stops us getting control of the phone...

Softbrick or sth else? Ideas welcome

Hi guys,
I tried to make a custom rom on my new HTC10 - something goes wrong (no it wasnt my first one )
But now I am a little bit stucked:
First the data:
** UNLOCKED **
htc_pmeuhl PVT S-OFF
CID-11111111
MID-2PS620000
ColorID-WHT00
LK-1.0.0.0000
[email protected]
OpenDSP-v20.0.8996.00007_0809
OS-2.41.401.41
Aug 2 2017,12:18:15(857212)
The Error happend after "updating" the firmware cause the Lee-Rom suggested the newst one. After the first "Loop" I tried the next one and the next and the next... I dont know how much Firmwares I tried honestly...
I am able to boot into TWRP and I am able to come back to Stock Recovery... So that will work... Maybe my partition crasehd with the Rom?
Any Idea or a little step by step suggestion?
I did the "How to root and TWRP" - Youtube tutorial by Rootjunky and until than everything worked fine... after that the failed Firmware-Update...
I have an EU-Phone, based in Germany
Hope anyone can help and thanks a lot for any ideas!
Cheers
majo

majomathes said:
Hi guys,
I tried to make a custom rom on my new HTC10 - something goes wrong (no it wasnt my first one )
But now I am a little bit stucked:
First the data:
** UNLOCKED **
htc_pmeuhl PVT S-OFF
CID-11111111
MID-2PS620000
ColorID-WHT00
LK-1.0.0.0000
[email protected]
OpenDSP-v20.0.8996.00007_0809
OS-2.41.401.41
Aug 2 2017,12:18:15(857212)
The Error happend after "updating" the firmware cause the Lee-Rom suggested the newst one. After the first "Loop" I tried the next one and the next and the next... I dont know how much Firmwares I tried honestly...
I am able to boot into TWRP and I am able to come back to Stock Recovery... So that will work... Maybe my partition crasehd with the Rom?
Any Idea or a little step by step suggestion?
I did the "How to root and TWRP" - Youtube tutorial by Rootjunky and until than everything worked fine... after that the failed Firmware-Update...
I have an EU-Phone, based in Germany
Hope anyone can help and thanks a lot for any ideas!
Cheers
majo
Click to expand...
Click to collapse
You are on the latest firmware for you phone. Did you try flash a US Unlocked firmware? Best thing to do is to flash the latest WWE RUU. Thanks @Kisakuku
https://androidfilehost.com/?fid=817550096634797504
Download and rename the zip to 2PS6IMG. zip
Place on external sdcard
Boot to download mode and press volume uo to flash. The RUU will erase EVERYTHING but you will be completely stock.

yldlj said:
You are on the latest firmware for you phone. Did you try flash a US Unlocked firmware? Best thing to do is to flash the latest WWE RUU. Thanks @Kisakuku
https://androidfilehost.com/?fid=817550096634797504
Download and rename the zip to 2PS6IMG. zip
Place on external sdcard
Boot to download mode and press volume uo to flash. The RUU will erase EVERYTHING but you will be completely stock.
Click to expand...
Click to collapse
I didnt know which one I all tried to flash - I think an US had a try
Do you have any other wink? Or is it just the WWE RUU? Can you explain what RUU stands for? I thought its a Russian version
Thank you a lot, Ill try it later :good:
edit: I always flashed Xiaomi & Sony devices, yet

majomathes said:
I didnt know which one I all tried to flash - I think an US had a try
Do you have any other wink? Or is it just the WWE RUU? Can you explain what RUU stands for? I thought its a Russian version
Thank you a lot, Ill try it later :good:
edit: I always flashed Xiaomi & Sony devices, yet
Click to expand...
Click to collapse
RUU = Rom Update Utility. It flashes the phone completely as if it came out of the box. Firmware, software.... the whole thing.

Mr Hofs said:
RUU = Rom Update Utility. It flashes the phone completely as if it came out of the box. Firmware, software.... the whole thing.
Click to expand...
Click to collapse
Thanks for explain =)
So I just have to flash the RUU - after that if the bootloader is still unlocked I can go ahead to flash a custom rom - right?
Thank you very much guys!

majomathes said:
Thanks for explain =)
So I just have to flash the RUU - after that if the bootloader is still unlocked I can go ahead to flash a custom rom - right?
Thank you very much guys!
Click to expand...
Click to collapse
Yes flash ruu to get the phone working again then reflash twrp then flash ROM. the bootloader will stay unlocked.

majomathes said:
Thanks for explain =)
So I just have to flash the RUU - after that if the bootloader is still unlocked I can go ahead to flash a custom rom - right?
Thank you very much guys!
Click to expand...
Click to collapse
Yup, flash the RUU, the bootloader will indeed remain unlocked. Flash TWRP and install the desired custom rom

Mr Hofs said:
Yup, flash the RUU, the bootloader will indeed remain unlocked. Flash TWRP and install the desired custom rom
Click to expand...
Click to collapse
Ok after flashing the RUU in download mode via sd-card with the volume up ... phone still not booting (hanging on the htc powered by android logo)
didnt flash twrp and custom rom,yet ... just want to test if its booting, seems to be not
sorry all good

majomathes said:
Ok after flashing the RUU in download mode via sd-card with the volume up ... phone still not booting (hanging on the htc powered by android logo)
didnt flash twrp and custom rom,yet ... just want to test if its booting, seems to be not
sorry all good
Click to expand...
Click to collapse
So is it working? Might take a while on first boot.

yldlj said:
So is it working? Might take a while on first boot.
Click to expand...
Click to collapse
No it doesnt work.
After flashin RUU I can boot into system (with the red warning for htc developement) but I cant install any custom rom ... bootloop is the result
and if i had the highest frustrationg, my "its really the last try" - worked... god damn it.. thank you guys. I dont know what the problem was... I did 10 times exactly the same thing
Thanks a lot... for people who stucking around like me:
1. use the link in post 2 and install
2. flash twrp ( https://twrp.me/htc/htc10.html) explained there
3. go into twrp do a data format or wipe ... or both and flash rom - gapps - supersu
4. reboot and wait sth like 5 minutes

majomathes said:
No it doesnt work.
After flashin RUU I can boot into system (with the red warning for htc developement) but I cant install any custom rom ... bootloop is the result
and if i had the highest frustrationg, my "its really the last try" - worked... god damn it.. thank you guys. I dont know what the problem was... I did 10 times exactly the same thing
Thanks a lot... for people who stucking around like me:
1. use the link in post 2 and install
2. flash twrp ( https://twrp.me/htc/htc10.html) explained there
3. go into twrp do a data format or wipe ... or both and flash rom - gapps - supersu
4. reboot and wait sth like 5 minutes
Click to expand...
Click to collapse
You mention flash gapps, for sense roms you don't have to do that, for aosp roms yes. But most of the time it's mentioned in the OP of aosp roms that you have to flash it twice, or flash the boot.img seperatly via fastboot to make it work. The correct gapps will do wonders too...... so i guess one of those things were the issue.