I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Bklynrx7 said:
I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Click to expand...
Click to collapse
Hmm......I know from personal experience (happened yesterday) that the USB cord might be at fault but that's one of many possibilities. I experienced the same problem, switched cords and it connected after I used a different cord.
Have you tried to connect in TWRP?
BTW.....what operating system is your PC running?
Guitarman2010 said:
Hmm......I know from personal experience (happened yesterday) that the USB cord might be at fault but that's one of many possibilities. I experienced the same problem, switched cords and it connected after I used a different cord.
Have you tried to connect in TWRP?
BTW.....what operating system is your PC running?
Click to expand...
Click to collapse
I did not try a different cable. I put my old rom (AOKP 4.1) back on and USB storage worked again, but disappeared once I put the 4.2.2 rom back. It always worked flawlessly with the old rom. The computer I tried this on is running Linux Mint 14.
Bklynrx7 said:
I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Click to expand...
Click to collapse
If you looked for this feature in Developer options, then I would say 99% you were looking at the wrong place.
Get into Storage -> Menu and turn on the UMS from there.
i have the same problem, update my kindle to 4.2.2 aosp and when conect to pc (w7) no recognize, dont appeairs, and a not find a option in configuration
jluis81 said:
i have the same problem, update my kindle to 4.2.2 aosp and when conect to pc (w7) no recognize, dont appeairs, and a not find a option in configuration
Click to expand...
Click to collapse
Does it connect to TWRP?
Guitarman2010 said:
Does it connect to TWRP?
Click to expand...
Click to collapse
i install and reinstall a 10 o more times, sometimes dont recognize sometime take it "portable media player" but no connect to TWRP, i dont know why, i hope find a way
jluis81 said:
i install and reinstall a 10 o more times, sometimes dont recognize sometime take it "portable media player" but no connect to TWRP, i dont know why, i hope find a way
Click to expand...
Click to collapse
Sorry to sound lazy but if it's not too much trouble, why not just stay with a ROM that connects?
Guitarman2010 said:
Sorry to sound lazy but if it's not too much trouble, why not just stay with a ROM that connects?
Click to expand...
Click to collapse
because its a great rom, more smoother, fasterand have more functionalities than other roms what i tested. i liked. i prefer trying to find a solution than changed
votinh said:
If you looked for this feature in Developer options, then I would say 99% you were looking at the wrong place.
Get into Storage -> Menu and turn on the UMS from there.
Click to expand...
Click to collapse
I looked in all the standard menus before enabling the developers options. Seeing now, that Im not the only one, Im assuming it might not be enabled in the rom.
I just had to flash my kindle back to stock so I can exchange it, but ill take another look at it when I get my new one.
Bklynrx7 said:
I looked in all the standard menus before enabling the developers options. Seeing now, that Im not the only one, Im assuming it might not be enabled in the rom.
I just had to flash my kindle back to stock so I can exchange it, but ill take another look at it when I get my new one.
Click to expand...
Click to collapse
You have to enable USB debugging. It will show up under Portable Devices in Win7.
congpc said:
You have to enable USB debugging. It will show up under Portable Devices in Win7.
Click to expand...
Click to collapse
This didn't work when I tried it, but I did find the answer. Under setting> Storage, I had to pull up the additional menu in the top right corner and enable mass storage. In previous ROM's I used it was in plain sight under the storage menu. Thanks for the reply.
Related
Dezire z keeps askinf for MTP drivee?? i recently flashed mexdroid rom, and in the beginning none of the usbs would connect my phone. I thought it was a nightly issue as it was based off of a nightly but now its using RC1.
Recently i played around, it wouldnt connect with the "ADB or Android phone driver." I fixed that and those work fine in Device Manager in Windows 7. However!, in device manager it KEEPS asking for MTP. i tried uninstalling, updating, everything!! and it just wont find my htc desire z.
ADB can find it when using command prompt. It can even logcat, and its weird why ADB can see it but windows cant. I have posted a Download link to the Logcat file. Im hoping anyone here can help me.
http://dl.dropbox.com/u/21509455/logcat.txt
thanks
edit* i think i read somewhere Android doesnt use MTP drivers....-confused-
windows 7 can see my phone and lets me safely remove it too, but wont let me see it in my computer.
issues I was having with W7 x64 were resolved by PDANet. you might try it out, although your issue is slightly different than mine... the device was entirely unrecognizable (by adb, fastboot, the whole shebang).
edit: NOTE you don't need to actually use PDAnet, it will just locate an appropriate driver and install it for you, then you can uninstall it from your PC.. unless you want to use it, of course. pretty slick.
pmcqueen said:
issues I was having with W7 x64 were resolved by PDANet. you might try it out, although your issue is slightly different than mine... the device was entirely unrecognizable (by adb, fastboot, the whole shebang).
edit: NOTE you don't need to actually use PDAnet, it will just locate an appropriate driver and install it for you, then you can uninstall it from your PC.. unless you want to use it, of course. pretty slick.
Click to expand...
Click to collapse
ive done this and it found the proper driver. "Android phone" BUT when it tries to connect with device, it says "failed to handshake with device" and proceeds to uninstall pdanet. Is it because its conflicting with windows 7 cant find the MTP driver?.... sooo confused.. never, ever had this problem
edit* after pdanet is uninstalled, the Android phone driver works fine, but MTP does not.
jark99 said:
ive done this and it found the proper driver. "Android phone" BUT when it tries to connect with device, it says "failed to handshake with device" and proceeds to uninstall pdanet. Is it because its conflicting with windows 7 cant find the MTP driver?.... sooo confused.. never, ever had this problem
edit* after pdanet is uninstalled, the Android phone driver works fine, but MTP does not.
Click to expand...
Click to collapse
that's a bugger.
when you plug the phone in, in device manager, does it show as a USB mass storage device under the USB controller section? to check: unplug all usb devices (aside from input devices like keyboard/mouse/what-have-you). plug in your phone and go to device manager (right click my computer->manage->device manager). under USB controllers, check and see if there is a USB mass storage device. assuming you have disconnected any other storage media, this is your phone.
if it does:
uninstall this driver, unplug your phone, restart, plug your phone back in.
if it doesn't:
my next step (take it for what it's worth - I'm sure there's an easier way) would be to unplug all usb devices (including keyboard/mouse - anything USB related), uninstall EVERYTHING under the USB Controller submenu, then restart and plug the phone in.
W7 should automatically recognize and reinstall the USB host controllers and hubs.
edit: are you using any other USB storage devices? thumb drives, ext harddrives, etc? do they work?
pmcqueen said:
that's a bugger.
when you plug the phone in, in device manager, does it show as a USB mass storage device under the USB controller section? to check: unplug all usb devices (aside from input devices like keyboard/mouse/what-have-you). plug in your phone and go to device manager (right click my computer->manage->device manager). under USB controllers, check and see if there is a USB mass storage device. assuming you have disconnected any other storage media, this is your phone.
if it does:
uninstall this driver, unplug your phone, restart, plug your phone back in.
if it doesn't:
my next step (take it for what it's worth - I'm sure there's an easier way) would be to unplug all usb devices (including keyboard/mouse - anything USB related), uninstall EVERYTHING under the USB Controller submenu, then restart and plug the phone in.
W7 should automatically recognize and reinstall the USB host controllers and hubs.
edit: are you using any other USB storage devices? thumb drives, ext harddrives, etc? do they work?
Click to expand...
Click to collapse
Under the usb section in device manager, i have about 8 or so usb controllers and stuff. Im using a Gateway Laptop and only one thing is using a usb port--- the mouse. Thats all. So i dont really have a clue which one is my htc phone because when plugging it in and going into device manager the only devices i remember using the phone were adb, android phone, and Now MTP. If i could pinpoint which usb controller is using my phone ill uninstall it. Other than that, what else is there? This is the strangest problem ever
Sent from my HTC Vision using XDA App
sighh, comeon guys. here ill post some pics of what is going on
Here are the pics of what is going on!!
Normal mode (no phone plugged in) - http://dl.dropbox.com/u/21509455/normal%20mode.jpg
Phone plugged in mode - http://dl.dropbox.com/u/21509455/phone%20plugged%20in.png
Uninstalled MTP & ADB driver Picture (looking for drivers) -http://dl.dropbox.com/u/21509455/phone%20uninstall%20drivers.jpg
Phone with ADB driver but no MTP - http://dl.dropbox.com/u/21509455/phone%20with%20driver%20found%20but%20no%20mtp%20.jpg
hope this helps , if you find something that can make this work let me know ASAP
140 views? and no one knows how to fix this problem?? anyone? hello?
jark99 said:
140 views? and no one knows how to fix this problem?? anyone? hello?
Click to expand...
Click to collapse
Have you tried the drivers from the official HTC Sync software? Also, are you actually trying to use the phone as an MTP device or as a USB mass storage device? I don't think you can use both at the same time (though I don't use this ROM so maybe things have changed). If you don't actually want the MTP functionality, I wouldn't worry about it.
Also, I noticed the notes for the ROM says "USB mounting is not working on a Windows OS computer" is a known issue. Not sure if that could be related...
ianmcquinn said:
Have you tried the drivers from the official HTC Sync software? Also, are you actually trying to use the phone as an MTP device or as a USB mass storage device? I don't think you can use both at the same time (though I don't use this ROM so maybe things have changed). If you don't actually want the MTP functionality, I wouldn't worry about it.
Also, I noticed the notes for the ROM says "USB mounting is not working on a Windows OS computer" is a known issue. Not sure if that could be related...
Click to expand...
Click to collapse
im trying to use it as a mass storage device, MTP isnt supposed to show up from what i read. but now it wont start without MTP
did you try what I pm'd you earlier today?
pmcqueen said:
did you try what I pm'd you earlier today?
Click to expand...
Click to collapse
windows 7 home doesnt have that script gpedit.msc
i looked all over google and it doesnt work . only pro and business versions have it.
Did the HTC Sync software not work? Also, have you tried formatting your SD card? Might be a long shot, but if it was ever used in MTP mode at one point, maybe your comp is detecting the files and thinking it's still an MTP device. Not sure if it works that way though...
Did you ever set the phone to MTP mode in the past? Like if you were ever on a Sense-based ROM. Maybe if you had it in MTP mode prior to flashing the new ROM, it stayed in it. Once again, no clue if it works that way since I've never used MTP on this phone before, but might be worth trying if you are out of options.
STILL havent fixed this MTP driver issue, have tried everything including the post above me!....NOTHING IS WORKING. why is it being recognised as mtp, when all i need is use the sd card.
this has been up for a week, seriously no one knows how to fix it?
jark99 said:
this has been up for a week, seriously no one knows how to fix it?
Click to expand...
Click to collapse
I'm guessing it's because no one else has encountered this problem before...
So what happened when you flashed back to a Sense-based ROM? I've never used one, but I thought when you connect the phone via USB, you have to choose what kind of connection you want (e.g., HTC Sync connection vs Disk Drive). Are you saying even when you choose to connect as a drive, the phone still shows up only as an MTP device (which I'm assuming is what is used when in HTC Sync mode)?
ianmcquinn said:
I'm guessing it's because no one else has encountered this problem before...
So what happened when you flashed back to a Sense-based ROM? I've never used one, but I thought when you connect the phone via USB, you have to choose what kind of connection you want (e.g., HTC Sync connection vs Disk Drive). Are you saying even when you choose to connect as a drive, the phone still shows up only as an MTP device (which I'm assuming is what is used when in HTC Sync mode)?
Click to expand...
Click to collapse
i switched to MIUI rom where i can mount sd card, and it still shows up as MTP in device manager on windows. Its not a rom issue, its a issue with WINDOWS seeing my device as a MTP and not STorage ....stupid windows 7.
jark99 said:
i switched to MIUI rom where i can mount sd card, and it still shows up as MTP in device manager on windows. Its not a rom issue, its a issue with WINDOWS seeing my device as a MTP and not STorage ....stupid windows 7.
Click to expand...
Click to collapse
Well either Windows sees your phone as an MTP device or the phone is actually reporting itself as an MTP device (not sure how it works on phones, but typically Windows communicates with firmware on a USB device to determine its classifications).
I'm guessing you already tried this since it's one of the only threads on the G2 forum when I did a search for MTP...
http://forum.xda-developers.com/showthread.php?t=901449
ianmcquinn said:
Well either Windows sees your phone as an MTP device or the phone is actually reporting itself as an MTP device (not sure how it works on phones, but typically Windows communicates with firmware on a USB device to determine its classifications).
I'm guessing you already tried this since it's one of the only threads on the G2 forum when I did a search for MTP...
http://forum.xda-developers.com/showthread.php?t=901449
Click to expand...
Click to collapse
Thankss i saw some of those. One method i didnt try, but ill try it and let you know how this goes. Thanks for the link
Sent from my HTC Vision using XDA App
Bumppp. Still no proper way to fix this!!
Sent from my HTC Vision using XDA App
anyone find any fix for this MTP ISSUE?
i feel like i'm missing something obvious here, but i don't see pc software or charge only in usb connect menu anymore, also the menu doesn't come up when i plug in usb, i just get a prompt if i want to mound sd card or not, it used to have a menu with 5 options now it has 3 and i have to go into settings > storage > menu button > usb connection mode just to see the menu.
thanks in advance for any help on this.
KronicSkillz said:
i feel like i'm missing something obvious here, but i don't see pc software or charge only in usb connect menu anymore, also the menu doesn't come up when i plug in usb, i just get a prompt if i want to mound sd card or not, it used to have a menu with 5 options now it has 3 and i have to go into settings > storage > menu button > usb connection mode just to see the menu.
thanks in advance for any help on this.
Click to expand...
Click to collapse
K so i've been reading more on this and i see that google took charge only mode out of android.... is this correct? if so did they also take pc software mode out to prevent connection from pc running terminal?
is there any other way to use adb shell from terminal on my pc using usb connection than pc software mode?
KronicSkillz said:
is there any other way to use adb shell from terminal on my pc using usb connection than pc software mode?
Click to expand...
Click to collapse
I have no problem using adb with whatever default setting the usb connection is set to in CM10. Just make sure you have Developer Options turned on and Android debugging enabled.
k good to know thanks
verified that on this rom V6, all usb modes are showing up and the menu is popup when i plug in usb, ahhhh, back to normal
http://forum.xda-developers.com/showthread.php?t=1980541
best Rom for p930 right now IMO.
KronicSkillz said:
verified that on this rom V6, all usb modes are showing up and the menu is popup when i plug in usb, ahhhh, back to normal
http://forum.xda-developers.com/showthread.php?t=1980541
best Rom for p930 right now IMO.
Click to expand...
Click to collapse
Sorry to bring back this thread but I wasn't sure if you figured it out or not?
Anyways, try this:
In CM10.1, I select Mass Storage. Afterward, a screen pops up saying "Press to toggle Mass Storage". When it's not toggled on, that is PC Mode. When toggled on, it's Mass Storage
i figured out that its cyanogenmod that has missing modes when i changed back to a stock based ics they all came back. i have 6 or 7 modes in stock ics and i only had 3 in cm10
KronicSkillz said:
i figured out that its cyanogenmod that has missing modes when i changed back to a stock based ics they all came back. i have 6 or 7 modes in stock ics and i only had 3 in cm10
Click to expand...
Click to collapse
Yeah that's what I'm saying. I don't think they actually are missing. I believe they've combined the settings so it's easier to switch between pc and mass storage (one button toggle between the two).
yes i know they are combined i dont like it.
KronicSkillz said:
yes i know they are combined i dont like it.
Click to expand...
Click to collapse
Oh sorry, I misunderstood you.
So I got my Nexus 7 2013 to work perfectly on my laptop, which runs Windows 7 x64. However, on my desktop, which also runs Win7 x64, I only have the ADB working correctly for the N7. As I recall, sometimes there is a device under Device Manager called "D:/", which is non-descriptive, but seems like the closest thing to the N7. I have tried to update this mysterious device's drivers by pointing to Google's USB drivers and the OEM drivers, but neither was accepted. There are also no devices with missing drivers listed in Device Manager.
At this point, I am not sure how to proceed. Is there a precise way identify under what device name/category the N7 shows up in Device Manager? Please advise. :fingers-crossed:
See if this helps:
http://forum.xda-developers.com/showthread.php?t=2391236
Cool, I'll give this a try in a bit.
zeppelin101 said:
Cool, I'll give this a try in a bit.
Click to expand...
Click to collapse
I cant get Nexus 7 to show has folder when check in MTP mode. it will show as camera folder PTP. Any solutions to this problem? very frustrating!
mickrg123 said:
I cant get Nexus 7 to show has folder when check in MTP mode. it will show as camera folder PTP. Any solutions to this problem? very frustrating!
Click to expand...
Click to collapse
Make sure USB Debugging is disabled, device is plugged in, and go to device manager in windows. Then right click on nexus 7 or android adb device, or any similar name. Then after uninstalling everything, unplug device and replug it in. Let windows get the drivers, and MTP should work!
fevanson said:
Make sure USB Debugging is disabled, device is plugged in, and go to device manager in windows. Then right click on nexus 7 or android adb device, or any similar name. Then after uninstalling everything, unplug device and replug it in. Let windows get the drivers, and MTP should work!
Click to expand...
Click to collapse
Thats my problem it doesn't when trying this.
mickrg123 said:
Thats my problem it doesn't when trying this.
Click to expand...
Click to collapse
get this and delete anything related to google and adb.
http://www.nirsoft.net/utils/usb_devices_view.html
fevanson said:
get this and delete anything related to google and adb.
http://www.nirsoft.net/utils/usb_devices_view.html
Click to expand...
Click to collapse
Deleted everything related to google and nexus. Still installs as adb device but doesnt show as nexus 7 device! Wug fresh has this program in its tool kit
It might sound dumb, but I was literally just having this issue. But apparently certan roms or kernel disable MTP mode when they are installed. i reinstall every driver just now. My fix was as easy as going to Settings > Storage > Menu Button Top right > Enable MTP box.
tonu42 said:
It might sound dumb, but I was literally just having this issue. But apparently certan roms or kernel disable MTP mode when they are installed. i reinstall every driver just now. My fix was as easy as going to Settings > Storage > Menu Button Top right > Enable MTP box.
Click to expand...
Click to collapse
What kernal or rom are you running?
---------- Post added at 10:10 PM ---------- Previous post was at 10:02 PM ----------
mickrg123 said:
What kernal or rom are you running?
Click to expand...
Click to collapse
Going to try a custom rom see if that works!
I have tried a number of the suggestions in this thread, including the deletion of all my google/adb/nexus (and samsung) drivers. None of these steps resolved my problem. However, at the end of the day, I can still use both ADB and MTP, just not at the same time. So it's not a big deal. I think I will mess around with Tasker and/or get a widget for turning ADB on/off.
Are you ale to get a nexus 7 device to show so you can access internal storage? I can only access camera storage.
mickrg123 said:
Are you ale to get a nexus 7 device to show so you can access internal storage?
Click to expand...
Click to collapse
Yea, that's what MTP is.
zeppelin101 said:
Yea, that's what MTP is.
Click to expand...
Click to collapse
That's my problem I can't access mtp.
mickrg123 said:
Are you ale to get a nexus 7 device to show so you can access internal storage? I can only access camera storage.
Click to expand...
Click to collapse
Are you running stock?
If so, do you have USB debugging turned on?
If you have USB debugging turned on, the USB IDs change and it might not (depending on what you have previously installed) recognize the MTP device anymore.
If you turn off USB debugging, it should recognize MTP.
Now if you are on a custom ROM, there might be some issues on the ROM side causing the MTP problem. Try going back to stock and see if it works.
If you are on stock and have the case where MTP only works with USB debugging disabled, then you can try this driver inf I put together to address that.
It is available in this thread:
http://forum.xda-developers.com/showthread.php?t=2391236
Hi to all,
everytime I connect my Ascend P6 (b125, no ROOT, no MODS) to PC, it connect as USB MassStorage. (then I can not see in menu applications, that are installed or moved on SDCard). I can change connection type, when I pull down status bar. But I want always connect as MTP. Is there a way to set default connection type to MTP? Before I had Samsung with cyanogenmod, and there it was in Settings -> Networks and connections -> USB (or so something, dont remember...)
thanks.
matobenko said:
Hi to all,
everytime I connect my Ascend P6 (b125, no ROOT, no MODS) to PC, it connect as USB MassStorage. (then I can not see in menu applications, that are installed or moved on SDCard). I can change connection type, when I pull down status bar. But I want always connect as MTP. Is there a way to set default connection type to MTP? Before I had Samsung with cyanogenmod, and there it was in Settings -> Networks and connections -> USB (or so something, dont remember...)
thanks.
Click to expand...
Click to collapse
I had the same issue, but not always, when my phone was connected to my pc
When you connect your phone and change the connection from USB storage to MTP, there should be an option right at the bottom, that says "Always prompt something-something", and untick that.
Sent from my Huawei P6
I have it unticked while selected MTP, but when I connect phone again, it connect again as USB srorage
hello, I have different trouble .. I just installed CM10.1 .. but mass_storage doesn't work .. even I modify build.prop ... persist.sys.usb.config=mass_storage,adb .. still can connect only as MTP or PTP .. any help? thanks
xvir said:
hello, I have different trouble .. I just installed CM10.1 .. but mass_storage doesn't work .. even I modify build.prop ... persist.sys.usb.config=mass_storage,adb .. still can connect only as MTP or PTP .. any help? thanks
Click to expand...
Click to collapse
Maybe the ROM/Kernel don't support Mass Storage.
matobenko said:
I have it unticked while selected MTP, but when I connect phone again, it connect again as USB srorage
Click to expand...
Click to collapse
My phone also started having this issue after it decided to restore itself to factory settings on New Year's Eve. It's really annoying! Would love to have someone provide the solution here.
Bumping this thread. This is causing a huge inconvenience for me. I'm discouraged from charging my phone over USB now.
Lupius said:
Bumping this thread. This is causing a huge inconvenience for me. I'm discouraged from charging my phone over USB now.
Click to expand...
Click to collapse
Which firmware are you on? What have you installed? Did you install any custom roms before, and which ones? Which recovery do you have? TWRP or stock?
bokchoi2020 said:
Which firmware are you on? What have you installed? Did you install any custom roms before, and which ones? Which recovery do you have? TWRP or stock?
Click to expand...
Click to collapse
B125 stock rom with standard apps. The issue began in B118.
Just updated to B137 and the problem persists. Completely giving up on this phone as I have a Nexus 5 inbound.
Hello,
I published a post here related to this pb.
This does require to modify boot.img which is a tricky operation.
I have a similar problem. When i plug in my Huawei Ascend p6, nothing happens it just starts charging. It use to open a window where it asked me what type of connection i would like to use, i probably selected charge only for default, and now i dont know how to change it back. Pls help.
dictator8 said:
I have a similar problem. When i plug in my Huawei Ascend p6, nothing happens it just starts charging. It use to open a window where it asked me what type of connection i would like to use, i probably selected charge only for default, and now i dont know how to change it back. Pls help.
Click to expand...
Click to collapse
Did you solved the issue? I'm having the same problem so maybe you can help me..
Thansks.
hello fellow users need some help
everytime i connect my Gpad through USB it fails to install MTP and so i cant "see" my tablet on Windows Explorer
my tablet is rooted if that helps in anyway
Thanks
Was curious if you ever found a fix for this. My tablet will not show up on the pc to copy files back and forth need a fix
shawn13165 said:
Was curious if you ever found a fix for this. My tablet will not show up on the pc to copy files back and forth need a fix
Click to expand...
Click to collapse
Have you enabled USB debugging in developer options? (to see developer options, click on "build" under settings several times until it appears.)
sleekmason said:
Have you enabled USB debugging in developer options? (to see developer options, click on "build" under settings several times until it appears.)
Click to expand...
Click to collapse
yes, tried that. tried different USB cables, installing/reinstalling usb drivers. I copy shows and things to my tablet to watch and It used to work, but it hasnt in some time and it kinda sucks having to power off tablet and pull sd card out to copy to it. Just getting frustrated with it. I even reset the device and updated it to android 5
Running through options, sounds like the computer. Can you hook up your phone?
Yea, phone shows up ok and just for the hell of it plugged tablet into laptop and it came up fine so i guess i have to figure out what is wrong with my desktop