Hi to all,
everytime I connect my Ascend P6 (b125, no ROOT, no MODS) to PC, it connect as USB MassStorage. (then I can not see in menu applications, that are installed or moved on SDCard). I can change connection type, when I pull down status bar. But I want always connect as MTP. Is there a way to set default connection type to MTP? Before I had Samsung with cyanogenmod, and there it was in Settings -> Networks and connections -> USB (or so something, dont remember...)
thanks.
matobenko said:
Hi to all,
everytime I connect my Ascend P6 (b125, no ROOT, no MODS) to PC, it connect as USB MassStorage. (then I can not see in menu applications, that are installed or moved on SDCard). I can change connection type, when I pull down status bar. But I want always connect as MTP. Is there a way to set default connection type to MTP? Before I had Samsung with cyanogenmod, and there it was in Settings -> Networks and connections -> USB (or so something, dont remember...)
thanks.
Click to expand...
Click to collapse
I had the same issue, but not always, when my phone was connected to my pc
When you connect your phone and change the connection from USB storage to MTP, there should be an option right at the bottom, that says "Always prompt something-something", and untick that.
Sent from my Huawei P6
I have it unticked while selected MTP, but when I connect phone again, it connect again as USB srorage
hello, I have different trouble .. I just installed CM10.1 .. but mass_storage doesn't work .. even I modify build.prop ... persist.sys.usb.config=mass_storage,adb .. still can connect only as MTP or PTP .. any help? thanks
xvir said:
hello, I have different trouble .. I just installed CM10.1 .. but mass_storage doesn't work .. even I modify build.prop ... persist.sys.usb.config=mass_storage,adb .. still can connect only as MTP or PTP .. any help? thanks
Click to expand...
Click to collapse
Maybe the ROM/Kernel don't support Mass Storage.
matobenko said:
I have it unticked while selected MTP, but when I connect phone again, it connect again as USB srorage
Click to expand...
Click to collapse
My phone also started having this issue after it decided to restore itself to factory settings on New Year's Eve. It's really annoying! Would love to have someone provide the solution here.
Bumping this thread. This is causing a huge inconvenience for me. I'm discouraged from charging my phone over USB now.
Lupius said:
Bumping this thread. This is causing a huge inconvenience for me. I'm discouraged from charging my phone over USB now.
Click to expand...
Click to collapse
Which firmware are you on? What have you installed? Did you install any custom roms before, and which ones? Which recovery do you have? TWRP or stock?
bokchoi2020 said:
Which firmware are you on? What have you installed? Did you install any custom roms before, and which ones? Which recovery do you have? TWRP or stock?
Click to expand...
Click to collapse
B125 stock rom with standard apps. The issue began in B118.
Just updated to B137 and the problem persists. Completely giving up on this phone as I have a Nexus 5 inbound.
Hello,
I published a post here related to this pb.
This does require to modify boot.img which is a tricky operation.
I have a similar problem. When i plug in my Huawei Ascend p6, nothing happens it just starts charging. It use to open a window where it asked me what type of connection i would like to use, i probably selected charge only for default, and now i dont know how to change it back. Pls help.
dictator8 said:
I have a similar problem. When i plug in my Huawei Ascend p6, nothing happens it just starts charging. It use to open a window where it asked me what type of connection i would like to use, i probably selected charge only for default, and now i dont know how to change it back. Pls help.
Click to expand...
Click to collapse
Did you solved the issue? I'm having the same problem so maybe you can help me..
Thansks.
Related
i feel like i'm missing something obvious here, but i don't see pc software or charge only in usb connect menu anymore, also the menu doesn't come up when i plug in usb, i just get a prompt if i want to mound sd card or not, it used to have a menu with 5 options now it has 3 and i have to go into settings > storage > menu button > usb connection mode just to see the menu.
thanks in advance for any help on this.
KronicSkillz said:
i feel like i'm missing something obvious here, but i don't see pc software or charge only in usb connect menu anymore, also the menu doesn't come up when i plug in usb, i just get a prompt if i want to mound sd card or not, it used to have a menu with 5 options now it has 3 and i have to go into settings > storage > menu button > usb connection mode just to see the menu.
thanks in advance for any help on this.
Click to expand...
Click to collapse
K so i've been reading more on this and i see that google took charge only mode out of android.... is this correct? if so did they also take pc software mode out to prevent connection from pc running terminal?
is there any other way to use adb shell from terminal on my pc using usb connection than pc software mode?
KronicSkillz said:
is there any other way to use adb shell from terminal on my pc using usb connection than pc software mode?
Click to expand...
Click to collapse
I have no problem using adb with whatever default setting the usb connection is set to in CM10. Just make sure you have Developer Options turned on and Android debugging enabled.
k good to know thanks
verified that on this rom V6, all usb modes are showing up and the menu is popup when i plug in usb, ahhhh, back to normal
http://forum.xda-developers.com/showthread.php?t=1980541
best Rom for p930 right now IMO.
KronicSkillz said:
verified that on this rom V6, all usb modes are showing up and the menu is popup when i plug in usb, ahhhh, back to normal
http://forum.xda-developers.com/showthread.php?t=1980541
best Rom for p930 right now IMO.
Click to expand...
Click to collapse
Sorry to bring back this thread but I wasn't sure if you figured it out or not?
Anyways, try this:
In CM10.1, I select Mass Storage. Afterward, a screen pops up saying "Press to toggle Mass Storage". When it's not toggled on, that is PC Mode. When toggled on, it's Mass Storage
i figured out that its cyanogenmod that has missing modes when i changed back to a stock based ics they all came back. i have 6 or 7 modes in stock ics and i only had 3 in cm10
KronicSkillz said:
i figured out that its cyanogenmod that has missing modes when i changed back to a stock based ics they all came back. i have 6 or 7 modes in stock ics and i only had 3 in cm10
Click to expand...
Click to collapse
Yeah that's what I'm saying. I don't think they actually are missing. I believe they've combined the settings so it's easier to switch between pc and mass storage (one button toggle between the two).
yes i know they are combined i dont like it.
KronicSkillz said:
yes i know they are combined i dont like it.
Click to expand...
Click to collapse
Oh sorry, I misunderstood you.
I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Bklynrx7 said:
I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Click to expand...
Click to collapse
Hmm......I know from personal experience (happened yesterday) that the USB cord might be at fault but that's one of many possibilities. I experienced the same problem, switched cords and it connected after I used a different cord.
Have you tried to connect in TWRP?
BTW.....what operating system is your PC running?
Guitarman2010 said:
Hmm......I know from personal experience (happened yesterday) that the USB cord might be at fault but that's one of many possibilities. I experienced the same problem, switched cords and it connected after I used a different cord.
Have you tried to connect in TWRP?
BTW.....what operating system is your PC running?
Click to expand...
Click to collapse
I did not try a different cable. I put my old rom (AOKP 4.1) back on and USB storage worked again, but disappeared once I put the 4.2.2 rom back. It always worked flawlessly with the old rom. The computer I tried this on is running Linux Mint 14.
Bklynrx7 said:
I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Click to expand...
Click to collapse
If you looked for this feature in Developer options, then I would say 99% you were looking at the wrong place.
Get into Storage -> Menu and turn on the UMS from there.
i have the same problem, update my kindle to 4.2.2 aosp and when conect to pc (w7) no recognize, dont appeairs, and a not find a option in configuration
jluis81 said:
i have the same problem, update my kindle to 4.2.2 aosp and when conect to pc (w7) no recognize, dont appeairs, and a not find a option in configuration
Click to expand...
Click to collapse
Does it connect to TWRP?
Guitarman2010 said:
Does it connect to TWRP?
Click to expand...
Click to collapse
i install and reinstall a 10 o more times, sometimes dont recognize sometime take it "portable media player" but no connect to TWRP, i dont know why, i hope find a way
jluis81 said:
i install and reinstall a 10 o more times, sometimes dont recognize sometime take it "portable media player" but no connect to TWRP, i dont know why, i hope find a way
Click to expand...
Click to collapse
Sorry to sound lazy but if it's not too much trouble, why not just stay with a ROM that connects?
Guitarman2010 said:
Sorry to sound lazy but if it's not too much trouble, why not just stay with a ROM that connects?
Click to expand...
Click to collapse
because its a great rom, more smoother, fasterand have more functionalities than other roms what i tested. i liked. i prefer trying to find a solution than changed
votinh said:
If you looked for this feature in Developer options, then I would say 99% you were looking at the wrong place.
Get into Storage -> Menu and turn on the UMS from there.
Click to expand...
Click to collapse
I looked in all the standard menus before enabling the developers options. Seeing now, that Im not the only one, Im assuming it might not be enabled in the rom.
I just had to flash my kindle back to stock so I can exchange it, but ill take another look at it when I get my new one.
Bklynrx7 said:
I looked in all the standard menus before enabling the developers options. Seeing now, that Im not the only one, Im assuming it might not be enabled in the rom.
I just had to flash my kindle back to stock so I can exchange it, but ill take another look at it when I get my new one.
Click to expand...
Click to collapse
You have to enable USB debugging. It will show up under Portable Devices in Win7.
congpc said:
You have to enable USB debugging. It will show up under Portable Devices in Win7.
Click to expand...
Click to collapse
This didn't work when I tried it, but I did find the answer. Under setting> Storage, I had to pull up the additional menu in the top right corner and enable mass storage. In previous ROM's I used it was in plain sight under the storage menu. Thanks for the reply.
Hi all, how are you?
I have a Galaxy Nexus unrooted stock with Android 4.3 (JWR66V).
After the update to 4.3, my device has stopped working in MTP/PTP mode.
I mean, When I connect my phone to my Notebook USB port, thus nothing happens on my notebook or my phone.
When my phone is connected to my notebook the notification dialog to select between MTP/PTP modes doesn`t show up anymore in the phone (it only says that is charging).
I have tried to re-install the drivers on my notebook, and It didn't fix this issue.
I have also tried to the a factory reset on my phone, and It did't fix the issue either.
Besides, I tried also to connect the phone with a different USB cable and it didn't fix the issue either.
Please, May someone help me?
Thanks in advance
Please, May someone help me?
I have no idea of what is going on and why USB stopped working after 4.3 update?
How do I troubleshoot this issue?any clues?
I figure out that on Android 4.3 I have ti go to Settings->Storage->Usb Computer Connection and manually select the connection mode...
(I am not sure Why the notification pop up doesn't show anymore on the phone when I connect it to the PC using the USB cable)
RogerSilva said:
I figure out that on Android 4.3 I have ti go to Settings->Storage->Usb Computer Connection and manually select the connection mode...
(I am not sure Why the notification pop up doesn't show anymore on the phone when I connect it to the PC using the USB cable)
Click to expand...
Click to collapse
You are totally right... dont know the stu... option doesnt appears clear. On my S3 I did the same, but the option wasnt visible... you must click over USB (even it appearing as dimmed) then a USB CONNECTION (or something like) appears you must click over and then a screen with MPT option will be available... For godsake WHY such thing isnt available on settings or on shortcut menu by default is beyond my understanding.
When I Try to connect My Zenfone to PC & also trying to connect on debugging mode then it show display that debugging section is totally disabled & showing message "Device is in Charging mode, USB debugging is disabled.
&
2nd Problem is Media Device Not showing in Mobile & PC Also.
PLZ HELP & GIVE ME PERFECT SOLUTION
I have same problem. After switching over in my car to charging only - my Zenfone is also saying "Device is in Charging mode, USB debugging is disabled" I can't find any switch to take it back. Also the same with Media Device not showing in Mobile & PC.
How to make this working again???
The PC connection mode on your phone is set to "Charge only". Idk about the stock ROM, but on CyanogenMod you just press the notification that shows up when you connect the phone to change the mode
wasiq224 said:
The PC connection mode on your phone is set to "Charge only". Idk about the stock ROM, but on CyanogenMod you just press the notification that shows up when you connect the phone to change the mode
Click to expand...
Click to collapse
Dear wasiq224,
Thanks for your answer, but is not working. I'm on CyanogenMod - but there is no notification shown up. Phone is quite and also PC - no message.
Even if I press under "STORAGE" -> "USB computer connection" the phone is saying: "USB is now disconnected". I checked already various menues for some settings without result. Google was also not help in this matter.
Hein_Mueck said:
Dear wasiq224,
Thanks for your answer, but is not working. I'm on CyanogenMod - but there is no notification shown up. Phone is quite and also PC - no message.
Even if I press under "STORAGE" -> "USB computer connection" the phone is saying: "USB is now disconnected". I checked already various menues for some settings without result. Google was also not help in this matter.
Click to expand...
Click to collapse
Try going to Developer Options>Disable USB Debugging, then reboot. Then connect your phone and try going to USB computer connection again, and enable whatever connection mode you want. You can re-enable USB debugging after that.
Dear wasip224
Checked once more the debugging setting's. But if the phone is connected to the computer or not connected, disableing USB Debugging is not possible. This item is greyed out all the time. See attached pictures.
Best regards
Hein Mueck
Same Problem with my device .........
Hein_Mueck said:
Dear wasip224
Checked once more the debugging setting's. But if the phone is connected to the computer or not connected, disableing USB Debugging is not possible. This item is greyed out all the time. See attached pictures.
Best regards
Hein Mueck
Click to expand...
Click to collapse
Same Problem with my device .........
Same with me
ishantanish said:
Same Problem with my device .........
Click to expand...
Click to collapse
With me is the same, i noticed that the Asus driver certificate is expired. If i disable windows driver signature verification it works.
drahhen said:
With me is the same, i noticed that the Asus driver certificate is expired. If i disable windows driver signature verification it works.
Click to expand...
Click to collapse
How you did do this?? Did you uninstall the driver first? Where I can find this?
Hein_Mueck said:
How you did do this?? Did you uninstall the driver first? Where I can find this?
Click to expand...
Click to collapse
I'm at work now, but you use Explorer and go to the folder where you extracted the drivers and use right-click --> properties in one of the files there. There is a tab that lists certificates. Just to be sure you can temporally disable driver signing verification.
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
This instructions works in windows 8.1 and 10.
See picture
drahhen said:
I'm at work now, but you use Explorer and go to the folder where you extracted the drivers and use right-click --> properties in one of the files there. There is a tab that lists certificates. Just to be sure you can temporally disable driver signing verification.
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
This instructions works in windows 8.1 and 10.
Click to expand...
Click to collapse
It's in portuguese but on the right part of the image you can see "Valido a partir de XXXX até XXXX" wich means "Valid from XXXX to XXXX". It expired last month.
Hi all,
Could you install latest Intel USB Driver from this link?
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Reupdate the driver manually and let me know.
Sent from my ASUS_Z00AD
krasCGQ said:
Hi all,
Could you install latest Intel USB Driver from this link?
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Reupdate the driver manually and let me know.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
Doesn't work for me, it says it cannot find the files. In my win10 install i have two problems, ADB only works if i disable driver signing verification and MTP doesn't work. I tried running sfc /scannow and it says WinUSB is corrupt and cannot be repaired (probably why MTP does not work). I tried using intel drivers for both and it does not work. Only ASUS works (but fails because of certificate) for ADB Composite Device, but mtp doesn't work anyway.
This tutorial could help you anyway.
http://forum.xda-developers.com/showthread.php?p=64093132
Sent from my ASUS_Z00AD
Dude i tried EVERYTHING, i flashed different roms and the issue persists
k1t4r0 said:
Dude i tried EVERYTHING, i flashed different roms and the issue persists
Click to expand...
Click to collapse
On another PC, or via tutorial on a post before you...
Sent from my GT-I9500
krasCGQ said:
On another PC, or via tutorial on a post before you...
Sent from my GT-I9500
Click to expand...
Click to collapse
Hi Kras and thank for the response!
I Tried it too but in my device manager it wont show any device related to asus nor adb.
Tryied to boot into TWRP but no MTP either.
I Tried USDBview but doesnt show. The strange fact is that the phone charges normally.
It happened after i switched to CHARGE ONLY... after that, could never go back "/
I think i´ll try to revert EVERYTHING to stock. Somethings not right.
Another information, the cellphone charges, i´ve tryied to unistall and reinstall every adb usb_driver but in driver manager, nothing appears, even an exclamation. Tried to force install drivers, nothing either. All this happened after set CHARGE MODE i´m so pissed off and frustrated
This is a shot in the dark, but in device manager you can click View>Show hidden devices.
From there you can truly uninstall all drivers, and then reboot and try reinstalling. Maybe this will help.
Also, different ports, different cables?
If it's just for file transfers have you also tried something like AirDroid or Dropbox/Google Drive/Mega?
Hello! I have a mi A2 lite, I can't connect it to the computer using USB, it doesn't install drivers, it doesn't appear on installed devices. I've tried all the tutorials available on YouTube, but it doesn't work, does anyone know what I could do to fix this?
- I already downloaded the drivers and installed manually, but nothing changes.
- I've tried on multiple computers and none work
- When I bought the cell phone it connected, but after a while no more.
Does anyone know any solution to this problem?
Thanks!
what rom are you on? I'm using the latest 11.0.7 android 10 and its perfectly fine for me.. maybe you can try to factory reset your phone
totoy unot said:
what rom are you on? I'm using the latest 11.0.7 android 10 and its perfectly fine for me.. maybe you can try to factory reset your phone
Click to expand...
Click to collapse
I'm using android 10 too, but the stock rom, I've formatted it several times, but it didn't work, this problem has existed since android 9
viniciusesales said:
- When I bought the cell phone it connected, but after a while no more.
Click to expand...
Click to collapse
Did you allow the phone to talk to USB. You must use the notification to enable file transfer or set the default in settings or enable debugging if you want it to show up to USB.
a1291762 said:
Did you allow the phone to talk to USB. You must use the notification to enable file transfer or set the default in settings or enable debugging if you want it to show up to USB.
Click to expand...
Click to collapse
It does not appear the notification, but I have already tried to activate by the settings too, I already connected the debugging mode, but it also did not work. When connector it only loads, there is no other action.
viniciusesales said:
It does not appear the notification, but I have already tried to activate by the settings too, I already connected the debugging mode, but it also did not work. When connector it only loads, there is no other action.
Click to expand...
Click to collapse
Sounds like a hardware issue then.
a1291762 said:
Sounds like a hardware issue then.
Click to expand...
Click to collapse
I'll take it to a technician to check it out, thank you very much.
I have the same prblm ...... any solutions? Help me please
Same here on v11.0.12. Its a driver issue. You need to install latest xiaomi drivers + qualcomm drivers. I fixed it before but it doesnt work again after i uninstall drivers.
I connected phone to PC with only old original short cable, no other cables worked :/
Have you tried to clean phone's USB socked? There are some spray contact cleaners, that can be used for this purpose.