Related
Dezire z keeps askinf for MTP drivee?? i recently flashed mexdroid rom, and in the beginning none of the usbs would connect my phone. I thought it was a nightly issue as it was based off of a nightly but now its using RC1.
Recently i played around, it wouldnt connect with the "ADB or Android phone driver." I fixed that and those work fine in Device Manager in Windows 7. However!, in device manager it KEEPS asking for MTP. i tried uninstalling, updating, everything!! and it just wont find my htc desire z.
ADB can find it when using command prompt. It can even logcat, and its weird why ADB can see it but windows cant. I have posted a Download link to the Logcat file. Im hoping anyone here can help me.
http://dl.dropbox.com/u/21509455/logcat.txt
thanks
edit* i think i read somewhere Android doesnt use MTP drivers....-confused-
windows 7 can see my phone and lets me safely remove it too, but wont let me see it in my computer.
issues I was having with W7 x64 were resolved by PDANet. you might try it out, although your issue is slightly different than mine... the device was entirely unrecognizable (by adb, fastboot, the whole shebang).
edit: NOTE you don't need to actually use PDAnet, it will just locate an appropriate driver and install it for you, then you can uninstall it from your PC.. unless you want to use it, of course. pretty slick.
pmcqueen said:
issues I was having with W7 x64 were resolved by PDANet. you might try it out, although your issue is slightly different than mine... the device was entirely unrecognizable (by adb, fastboot, the whole shebang).
edit: NOTE you don't need to actually use PDAnet, it will just locate an appropriate driver and install it for you, then you can uninstall it from your PC.. unless you want to use it, of course. pretty slick.
Click to expand...
Click to collapse
ive done this and it found the proper driver. "Android phone" BUT when it tries to connect with device, it says "failed to handshake with device" and proceeds to uninstall pdanet. Is it because its conflicting with windows 7 cant find the MTP driver?.... sooo confused.. never, ever had this problem
edit* after pdanet is uninstalled, the Android phone driver works fine, but MTP does not.
jark99 said:
ive done this and it found the proper driver. "Android phone" BUT when it tries to connect with device, it says "failed to handshake with device" and proceeds to uninstall pdanet. Is it because its conflicting with windows 7 cant find the MTP driver?.... sooo confused.. never, ever had this problem
edit* after pdanet is uninstalled, the Android phone driver works fine, but MTP does not.
Click to expand...
Click to collapse
that's a bugger.
when you plug the phone in, in device manager, does it show as a USB mass storage device under the USB controller section? to check: unplug all usb devices (aside from input devices like keyboard/mouse/what-have-you). plug in your phone and go to device manager (right click my computer->manage->device manager). under USB controllers, check and see if there is a USB mass storage device. assuming you have disconnected any other storage media, this is your phone.
if it does:
uninstall this driver, unplug your phone, restart, plug your phone back in.
if it doesn't:
my next step (take it for what it's worth - I'm sure there's an easier way) would be to unplug all usb devices (including keyboard/mouse - anything USB related), uninstall EVERYTHING under the USB Controller submenu, then restart and plug the phone in.
W7 should automatically recognize and reinstall the USB host controllers and hubs.
edit: are you using any other USB storage devices? thumb drives, ext harddrives, etc? do they work?
pmcqueen said:
that's a bugger.
when you plug the phone in, in device manager, does it show as a USB mass storage device under the USB controller section? to check: unplug all usb devices (aside from input devices like keyboard/mouse/what-have-you). plug in your phone and go to device manager (right click my computer->manage->device manager). under USB controllers, check and see if there is a USB mass storage device. assuming you have disconnected any other storage media, this is your phone.
if it does:
uninstall this driver, unplug your phone, restart, plug your phone back in.
if it doesn't:
my next step (take it for what it's worth - I'm sure there's an easier way) would be to unplug all usb devices (including keyboard/mouse - anything USB related), uninstall EVERYTHING under the USB Controller submenu, then restart and plug the phone in.
W7 should automatically recognize and reinstall the USB host controllers and hubs.
edit: are you using any other USB storage devices? thumb drives, ext harddrives, etc? do they work?
Click to expand...
Click to collapse
Under the usb section in device manager, i have about 8 or so usb controllers and stuff. Im using a Gateway Laptop and only one thing is using a usb port--- the mouse. Thats all. So i dont really have a clue which one is my htc phone because when plugging it in and going into device manager the only devices i remember using the phone were adb, android phone, and Now MTP. If i could pinpoint which usb controller is using my phone ill uninstall it. Other than that, what else is there? This is the strangest problem ever
Sent from my HTC Vision using XDA App
sighh, comeon guys. here ill post some pics of what is going on
Here are the pics of what is going on!!
Normal mode (no phone plugged in) - http://dl.dropbox.com/u/21509455/normal%20mode.jpg
Phone plugged in mode - http://dl.dropbox.com/u/21509455/phone%20plugged%20in.png
Uninstalled MTP & ADB driver Picture (looking for drivers) -http://dl.dropbox.com/u/21509455/phone%20uninstall%20drivers.jpg
Phone with ADB driver but no MTP - http://dl.dropbox.com/u/21509455/phone%20with%20driver%20found%20but%20no%20mtp%20.jpg
hope this helps , if you find something that can make this work let me know ASAP
140 views? and no one knows how to fix this problem?? anyone? hello?
jark99 said:
140 views? and no one knows how to fix this problem?? anyone? hello?
Click to expand...
Click to collapse
Have you tried the drivers from the official HTC Sync software? Also, are you actually trying to use the phone as an MTP device or as a USB mass storage device? I don't think you can use both at the same time (though I don't use this ROM so maybe things have changed). If you don't actually want the MTP functionality, I wouldn't worry about it.
Also, I noticed the notes for the ROM says "USB mounting is not working on a Windows OS computer" is a known issue. Not sure if that could be related...
ianmcquinn said:
Have you tried the drivers from the official HTC Sync software? Also, are you actually trying to use the phone as an MTP device or as a USB mass storage device? I don't think you can use both at the same time (though I don't use this ROM so maybe things have changed). If you don't actually want the MTP functionality, I wouldn't worry about it.
Also, I noticed the notes for the ROM says "USB mounting is not working on a Windows OS computer" is a known issue. Not sure if that could be related...
Click to expand...
Click to collapse
im trying to use it as a mass storage device, MTP isnt supposed to show up from what i read. but now it wont start without MTP
did you try what I pm'd you earlier today?
pmcqueen said:
did you try what I pm'd you earlier today?
Click to expand...
Click to collapse
windows 7 home doesnt have that script gpedit.msc
i looked all over google and it doesnt work . only pro and business versions have it.
Did the HTC Sync software not work? Also, have you tried formatting your SD card? Might be a long shot, but if it was ever used in MTP mode at one point, maybe your comp is detecting the files and thinking it's still an MTP device. Not sure if it works that way though...
Did you ever set the phone to MTP mode in the past? Like if you were ever on a Sense-based ROM. Maybe if you had it in MTP mode prior to flashing the new ROM, it stayed in it. Once again, no clue if it works that way since I've never used MTP on this phone before, but might be worth trying if you are out of options.
STILL havent fixed this MTP driver issue, have tried everything including the post above me!....NOTHING IS WORKING. why is it being recognised as mtp, when all i need is use the sd card.
this has been up for a week, seriously no one knows how to fix it?
jark99 said:
this has been up for a week, seriously no one knows how to fix it?
Click to expand...
Click to collapse
I'm guessing it's because no one else has encountered this problem before...
So what happened when you flashed back to a Sense-based ROM? I've never used one, but I thought when you connect the phone via USB, you have to choose what kind of connection you want (e.g., HTC Sync connection vs Disk Drive). Are you saying even when you choose to connect as a drive, the phone still shows up only as an MTP device (which I'm assuming is what is used when in HTC Sync mode)?
ianmcquinn said:
I'm guessing it's because no one else has encountered this problem before...
So what happened when you flashed back to a Sense-based ROM? I've never used one, but I thought when you connect the phone via USB, you have to choose what kind of connection you want (e.g., HTC Sync connection vs Disk Drive). Are you saying even when you choose to connect as a drive, the phone still shows up only as an MTP device (which I'm assuming is what is used when in HTC Sync mode)?
Click to expand...
Click to collapse
i switched to MIUI rom where i can mount sd card, and it still shows up as MTP in device manager on windows. Its not a rom issue, its a issue with WINDOWS seeing my device as a MTP and not STorage ....stupid windows 7.
jark99 said:
i switched to MIUI rom where i can mount sd card, and it still shows up as MTP in device manager on windows. Its not a rom issue, its a issue with WINDOWS seeing my device as a MTP and not STorage ....stupid windows 7.
Click to expand...
Click to collapse
Well either Windows sees your phone as an MTP device or the phone is actually reporting itself as an MTP device (not sure how it works on phones, but typically Windows communicates with firmware on a USB device to determine its classifications).
I'm guessing you already tried this since it's one of the only threads on the G2 forum when I did a search for MTP...
http://forum.xda-developers.com/showthread.php?t=901449
ianmcquinn said:
Well either Windows sees your phone as an MTP device or the phone is actually reporting itself as an MTP device (not sure how it works on phones, but typically Windows communicates with firmware on a USB device to determine its classifications).
I'm guessing you already tried this since it's one of the only threads on the G2 forum when I did a search for MTP...
http://forum.xda-developers.com/showthread.php?t=901449
Click to expand...
Click to collapse
Thankss i saw some of those. One method i didnt try, but ill try it and let you know how this goes. Thanks for the link
Sent from my HTC Vision using XDA App
Bumppp. Still no proper way to fix this!!
Sent from my HTC Vision using XDA App
anyone find any fix for this MTP ISSUE?
I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Bklynrx7 said:
I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Click to expand...
Click to collapse
Hmm......I know from personal experience (happened yesterday) that the USB cord might be at fault but that's one of many possibilities. I experienced the same problem, switched cords and it connected after I used a different cord.
Have you tried to connect in TWRP?
BTW.....what operating system is your PC running?
Guitarman2010 said:
Hmm......I know from personal experience (happened yesterday) that the USB cord might be at fault but that's one of many possibilities. I experienced the same problem, switched cords and it connected after I used a different cord.
Have you tried to connect in TWRP?
BTW.....what operating system is your PC running?
Click to expand...
Click to collapse
I did not try a different cable. I put my old rom (AOKP 4.1) back on and USB storage worked again, but disappeared once I put the 4.2.2 rom back. It always worked flawlessly with the old rom. The computer I tried this on is running Linux Mint 14.
Bklynrx7 said:
I recently updated my kindle with the AOSP 4.2.2 rom found here: http://forum.xda-developers.com/showthread.php?t=2041694
it works perfectly and smooth, but the device no longer shows up as mass storage when plugged into my pc. I looked through all the settings and enabled the developers menu, but I still do not see an option to turn on mass storage. USB debugging is activated when its plugged in but there is no option to turn storage on. Does anyone else have the same rom/problem. I am unable to post in the developers section so Im hoping I can get more info here. I would hate to have to install a different rom.
Click to expand...
Click to collapse
If you looked for this feature in Developer options, then I would say 99% you were looking at the wrong place.
Get into Storage -> Menu and turn on the UMS from there.
i have the same problem, update my kindle to 4.2.2 aosp and when conect to pc (w7) no recognize, dont appeairs, and a not find a option in configuration
jluis81 said:
i have the same problem, update my kindle to 4.2.2 aosp and when conect to pc (w7) no recognize, dont appeairs, and a not find a option in configuration
Click to expand...
Click to collapse
Does it connect to TWRP?
Guitarman2010 said:
Does it connect to TWRP?
Click to expand...
Click to collapse
i install and reinstall a 10 o more times, sometimes dont recognize sometime take it "portable media player" but no connect to TWRP, i dont know why, i hope find a way
jluis81 said:
i install and reinstall a 10 o more times, sometimes dont recognize sometime take it "portable media player" but no connect to TWRP, i dont know why, i hope find a way
Click to expand...
Click to collapse
Sorry to sound lazy but if it's not too much trouble, why not just stay with a ROM that connects?
Guitarman2010 said:
Sorry to sound lazy but if it's not too much trouble, why not just stay with a ROM that connects?
Click to expand...
Click to collapse
because its a great rom, more smoother, fasterand have more functionalities than other roms what i tested. i liked. i prefer trying to find a solution than changed
votinh said:
If you looked for this feature in Developer options, then I would say 99% you were looking at the wrong place.
Get into Storage -> Menu and turn on the UMS from there.
Click to expand...
Click to collapse
I looked in all the standard menus before enabling the developers options. Seeing now, that Im not the only one, Im assuming it might not be enabled in the rom.
I just had to flash my kindle back to stock so I can exchange it, but ill take another look at it when I get my new one.
Bklynrx7 said:
I looked in all the standard menus before enabling the developers options. Seeing now, that Im not the only one, Im assuming it might not be enabled in the rom.
I just had to flash my kindle back to stock so I can exchange it, but ill take another look at it when I get my new one.
Click to expand...
Click to collapse
You have to enable USB debugging. It will show up under Portable Devices in Win7.
congpc said:
You have to enable USB debugging. It will show up under Portable Devices in Win7.
Click to expand...
Click to collapse
This didn't work when I tried it, but I did find the answer. Under setting> Storage, I had to pull up the additional menu in the top right corner and enable mass storage. In previous ROM's I used it was in plain sight under the storage menu. Thanks for the reply.
Hey guys. I been here for like 4 hours just dabbling with everything. And cannot seem to find any solution to this...
I have uninstall all drivers and restarted like ten times now doing the same process over and over, cleaning up each file carefully of the nexus or any android device.
My problem is when i plug in my nexus 7 2nd gen, it seems to not even detect squat.
I have usb debug enabled
my MTP is on
( if i switch to PTP i can access the folder)
Ive done fresh start on everything i even look through device and try changing the option to MTP and STILL DOES not work
I don't even see my nexus 7 in my HDD external or anything, nothing pops up but an ADB success driver, and when i changed it to MTP a MTP success driver with STILL no luck....
I just bought it today and it worked fine earlier, now when i root it and stuff it seems to be glitchy with my MTP
I even factory reset everything i couldn't access my ADB
any help would be appreciated
Someone said that manually updating the adb usb driver in devices should show you a choice, choose mtp. It should then sort itself out properly.
n9900229 said:
Hey guys. I been here for like 4 hours just dabbling with everything. And cannot seem to find any solution to this...
I have uninstall all drivers and restarted like ten times now doing the same process over and over, cleaning up each file carefully of the nexus or any android device.
My problem is when i plug in my nexus 7 2nd gen, it seems to not even detect squat.
I have usb debug enabled
my MTP is on
( if i switch to PTP i can access the folder)
Ive done fresh start on everything i even look through device and try changing the option to MTP and STILL DOES not work
I don't even see my nexus 7 in my HDD external or anything, nothing pops up but an ADB success driver, and when i changed it to MTP a MTP success driver with STILL no luck....
I just bought it today and it worked fine earlier, now when i root it and stuff it seems to be glitchy with my MTP
I even factory reset everything i couldn't access my ADB
any help would be appreciated
Click to expand...
Click to collapse
On your Nexus, open "settings", click on "Storage", click on options(3 vertical dots on the top right corner), click on "USB PC Connection", now check MTP option.
Try connecting to your PC (or Mac) now. I didn't have to do that on a stock build, but for some reason I had to do it on a couple of custom roms. Hope it helps ya out...
Try enabling USB debugging. I know it sounds odd but its helped me with my devices.
Sent from my Nexus 7 using Tapatalk 4
do this only if you can see PTP on PC
On PC check device manger, on Android if there is ADB driver - uninstall it
On N7 set to MTP, debug off and reboot with N7 USB cable connected to PC
It should re-install the ABD drivers on PC before N7 fully boots up
You will be back in action.
n9900229 said:
I have usb debug enabled
my MTP is on
Click to expand...
Click to collapse
Actually for me, it's the opposite. If usb debugging is on I can't access the device to view files. Try disabling it?
yea thanks though everyone I got it to work. I had my old nexus and new drivers mixing up my ports for some reason not being able to access it at all
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
I had the same issue with my MXP and still have it with my OP. Just can't seem to get my pc to recognize them as storage devices.
A workaround I have found is to boot into twrp, then their recognized immediately and can be used as an external storage device.
I also got 'charging only' mode when I first connected OP3 to my laptop but after changing the settings at developer options I could do the file transfers and all.
I hope some of your privacy setting isn't messing up with it because AFAIK it shouldn't be a hardware problem.
I have the same issue.
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
bruciebabie1963 said:
I have the same issue.
Click to expand...
Click to collapse
I turned off usb debugging and now my computer recognizes my device.
numbere said:
I had the same issue with my MXP and still have it with my OP. Just can't seem to get my pc to recognize them as storage devices.
A workaround I have found is to boot into twrp, then their recognized immediately and can be used as an external storage device.
Click to expand...
Click to collapse
Thing is I cannot unlock bootloader and install TWRP because the USB connection is needed for that
Beside, this is a 2 days old phone, I'm expecting it to work flawlessly...
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
white43 said:
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
Click to expand...
Click to collapse
I don't get the pop-up, the phone really does not detect that it's connected to a computer.
Isayaa said:
I don't get the pop-up, the phone really does not detect that it's connected to a computer.
Click to expand...
Click to collapse
That sounds like a hardware problem.
I don't have developer USB debugging mode on or anything.
I have this issue with my op3. Just got it in the post today. My windows 10 pc bleeps when pugged in but does not load a drive. In device manager it shows up as the d drive but not in file explorer. Annoying!
My windows 7 (company laptop) recognised my phone first time and installed the drivers no problem. I had problems with my USB flash drive earlier today until I discovered the hidden enable OTG toggle.
Sent from my ONEPLUS A3003 using Tapatalk
Isayaa said:
Hello everybody,
I received my OP3 yesterday and I'm quite happy with my phone, but I'm having an worrying problem with the USB connection. Indeed, I cannot seem to get the USB connection working in MTP mode. In fact, I cannot get anything else working than charging mode.
Things I already tried :
- Enabling USB debugging
- 3 different cables (OP2, OP3, no brand)
- Manually choosing MTP mode in developper options
- 2 different computers
Maybe the most worrying thing is that the Windows device manager doesn't see any device when I connect the phone, not even a device with an error...
I'm really starting to think this is a hardware problem
Please, HELP ! :crying:
Click to expand...
Click to collapse
I had the same problem.
What I did to fix it was the following steps:
- Disable USB debugging in developer options
- Choose PTP mode in developer options
- Choose MTP mode in developer options
- And Done, my PC now recognize the phone in MTP mode
what i do to fix this
- disable OEM unlocking
- disable developer options
- plug USB (wait for drivers install)
- enable developer options
- enable USB debuging
Gah, having similar problems!
Have tried all the workarounds suggested here, but whenever I plug it in on MTP mode it just shows me the OnePlus Drivers CD Drive.
I have installed the drivers (multiple times) but Windows 10 just won't see the phone when I plug it on MTP mode, just shows me the Drivers CD Drive every single time.
It's recognised as PTP no problems, but no luck on MTP!
Any ideas?
(Unlocked, not yet rooted, on stock firmware)
op3
Hi, i have the same problem, has anyone found any solution for this? It's starting to get pretty irritating... :/
Are you sure youre choosing file transfer mode from the notification area where by default its selected as charging only.
Try this
Hi Guys,
Try halfway inserting the USB cable into your PC, I was having the same frustrating problem and noticed that did the trick for me.
Still trying to figure out why the connectors are not responding when the USB cable is fully inserted, I admit that this is my first device using USB Type-C.
strange
The problem is not getting any better, i simply cannot get windows to even recognise my phone in device manager. Tried it in adb and fastboot, also tried a hard reset but no solution.. I requested a repair from oneplus because i think it cannot be anything else than a hardware problem.
guys i found solution on op3 forum... it worked 4 me with win 10 enterprise... download and install update from here... https://support.microsoft.com/en-us/kb/3099229
This worked fo me: (i'm using Win10)
Device manager, and find "MTP device" then driver update, find on computer, and select MTP USB Composit Device. It works with enabled Debugging, OEM unlock is on too. :good:
white43 said:
When you connect the phone, Marshmallow by default connects in charging mode.
- Swipe down and you will see USB for charging "Touch for more options"
- Select 'File Transfers'
Transfer files.
Click to expand...
Click to collapse
Solved my problem
USB will not function with my OnePlus 3, I've loaded drivers and still no avail.
templarsniper said:
USB will not function with my OnePlus 3, I've loaded drivers and still no avail.
Click to expand...
Click to collapse
As regards the attaching of files, you have to have a minimum number of posts to be able to do that.
As regards the USB, be a little more specific like what you are trying to do, which ROM you are running, whether you are rooted, what happens when you connect the phone to PC etc which will enable the members to help you.
There could be several reasons for this, but lets start with the basics.
Have you tried a different cable?
Have you selected File Transfer (MTP) from usb options?
kenboyles72 said:
There could be several reasons for this, but lets start with the basics.
Have you tried a different cable?
Have you selected File Transfer (MTP) from usb options?
Click to expand...
Click to collapse
I get a windows sound like its connecting then in the bottom right where the time is next to that is a root sign then I get a pop up saying exactly.....The last USB device you connected to this computer malfunctioned and Windows does not recognize it. Recommendation.. Try reconnecting the device. If Windows still does not recognize it, your device may not be working properly. When I go to the Device Manager/Control Panel it doesnt do anything. I've tried to add adb to the path but maybe added it to wrong path now it won't come on. If there is a work around maybe to re-add to right path. Device Manager was fine before I added adb and added path as per internet search. Device Manager before would say something like error 39. I've tried MTP that doesn't get it to open up either.
TNSMANI said:
As regards the attaching of files, you have to have a minimum number of posts to be able to do that.
As regards the USB, be a little more specific like what you are trying to do, which ROM you are running, whether you are rooted, what happens when you connect the phone to PC etc which will enable the members to help you.
Click to expand...
Click to collapse
I cant even root for the life of me now, Im on 8.0, I'm trying to just root the phone and to start the computer has to recognize it I understand but it won't, with my Oneplus 2 was fine,(I'm thinking maybe phone doesnt have the drivers built in to the file system, you know when you plug in and turn on MTP it shows the drivers app for Windows?) the only thing it errors plugging in.
I get a windows sound like its connecting then in the bottom right where the time is next to that is a root sign then I get a pop up saying exactly.....The last USB device you connected to this computer malfunctioned and Windows does not recognize it. Recommendation.. Try reconnecting the device. If Windows still does not recognize it, your device may not be working properly. When I go to the Device Manager/Control Panel it doesnt do anything. I've tried to add adb to the path but maybe added it to wrong path now it won't come on. If there is a work around maybe to re-add to right path. Device Manager was fine before I added adb and added path as per internet search. Device Manager before would say something like error 39. I've tried MTP that doesn't get it to open up either.
On my son's pc running windows 10, I didn't have any issues connecting my OP3 to it and viewing files, nor did I have to install any drivers, same for Windows 7.
Hook phone to pc via usb cable.
Pull down notification bar and select "File Transfer" from usb options or go to Settings and search USB and select USB Preferences > File Transfer.
Browse phone from Window's file manager.
If still having issues, you can try and install Oneplus USB drivers, reboot pc and see if the phone can be recognized.
Oneplus USB drivers:
https://app.box.com/s/u47rur40qm5efly6pz41rbhagu5qvc80
Fixed USB problem
kenboyles72 said:
On my son's pc running windows 10, I didn't have any issues connecting my OP3 to it and viewing files, nor did I have to install any drivers, same for Windows 7.
Hook phone to pc via usb cable.
Pull down notification bar and select "File Transfer" from usb options or go to Settings and search USB and select USB Preferences > File Transfer.
Browse phone from Window's file manager.
If still having issues, you can try and install Oneplus USB drivers, reboot pc and see if the phone can be recognized.
Oneplus USB drivers:
https://app.box.com/s/u47rur40qm5efly6pz41rbhagu5qvc80
Click to expand...
Click to collapse
For some reason it's working now don't know what the problem was or even if it was something I did. Either way it's fixed.
templarsniper said:
For some reason it's working now don't know what the problem was or even if it was something I did. Either way it's fixed.
Click to expand...
Click to collapse
If you are running Win 10, you will have to disable driver signing before the correct drivers are installed. May be that was your issue.