Develop Bugs

Wifi Error

Please help me about my gio i updated it yesterday but bluetooth and wifi status is error. 2.3.4

What kind of error? Can you be a bit more specific??
Sent from my GT-S5660 using xda premium

I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable

johnarela said:
I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable
Click to expand...
Click to collapse
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium

I already do it but nothing happen it always says driver unsuccessful when i press *#*#526#*#*

voetbalremco said:
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
ROFL, he doesn't need to install CWM Recovery just to wipe all. He has stock recovery where he can do wipe data and cache or just put a code in the dialer.
Just shut off the phone and turn it on by pressing Home button + Power and you will get into stock recovery, then wipe data and cache.

i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens

johnarela said:
i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens
Click to expand...
Click to collapse
Try flashing another firmware
Sent from my GT-S5660 using xda premium

a new firmware would fix it why would u like 2.3.4 when the latest is 2.3.6, try to flash DXKT4 and then make a factory reset hope this helps

I would suggest, you give a shot to the new CyanogenMod 7.2
Follow this link: http://forum.xda-developers.com/showthread.php?t=1381355
I tell you, it is much more reliable than you might think. Moreover, because of the custom kernel, you can select some pre-installed CPU governor, so that your GIO become even a bit faster.
Good Luck

Hi,
First, i would like to know, you are upgrading from what firmware to what firmware? is it one package firmware or full package?
I would suggest you to flash it again, but this time, using the full package firmware. After that, don't forget to wipe data/cache, and then factory reset, all via recovery mode.
My exp about upgrading:
- from S5660DXKC3 (froyo, one package) to S5660DXKP6 (gingerbread, one package)
- unstable, lagging, wasteful of battery (bottom line is, disappointed)

Note that xkp6 2.3.6 on xda thread has been modified, on sammobile its a clean rom
Sent from my GT-S5660 using xda premium

most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...

0M3G4_ said:
most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...
Click to expand...
Click to collapse
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??

0M3G4_ said:
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??
Click to expand...
Click to collapse
Remove the .md5 , extract the .tar
And flash the amss file .
Sent from my GT-S5660 using xda premium

WIFI+BT+Acceloremeter
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.

sohaib.ahln said:
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.
Click to expand...
Click to collapse
Let me guess. You have an SHW-500 or something?!
Sent from my GT-S5660 using xda app-developers app

When flashing with ODIN:
Make sure you flash the right firmware! If you flashed any firmware, it also flashes their model's and Country's: modem, csc, kernel, system, etc...
Thus resulting wifi, data, bluetooth, and connectivity errors.
Find the right Stock ROM for your Gio model here. Then use ODIN to flash it.

Touchscreen not working on stable CM9 FXP133

I installed the stable cm9..flashed the fxp133 kernel..the installation went smooth but my screen touch function is lost..Any ideas??
Eventually restoring to the stock kernel with JJ hybrid..and yeah the touch is working with this one. So is the problem cos of the kernel or the ROM??
I ll tell the sequence which i followed..let me know where i went wrong..i downloaded the ROM, extracted the boot.img, copied the original cm9 zip into the root of SD..used fastboot mode of flashtools to flash the kernel boot.img..then went into CWM..wiped out SD data..then cache..and then dalvik..and then proceeded to install zip from sd..it installed fine..and then i rebooted..it showed d FXP kernel logo and then CM9 bootscreen and then it loaded like it should..BUT the touchscreen isnt working at all..the hardware keys-power and back i checked were working but not the touchscreen..
Where did I go wrong..i am on baseband -72..bootloader unlocked..

You've installed correctly. Possibly a corrupt download, try re-downloading the zip.

sinkster said:
You've installed correctly. Possibly a corrupt download, try re-downloading the zip.
Click to expand...
Click to collapse
I downloaded both official stable CM9 as well as the FXP one on uploaded.to...tried with each of them but with the same result..both cant be corrupt n it wouldnt have extracted if it was a corrupt download anyways..m still wondering whats wrong..
Also I flashed doomkernel and tried installing..again the same..touchscreen still doesnt work..aarghh..

Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium

I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app

Braayhaan said:
Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium
Click to expand...
Click to collapse
iwarind said:
I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Wiping battery stats does nothing to your phone. It doesn't change anything, it doesn't affect anything. It cannot be the problem.

Then what do u think the problem is..infact the installation works fine so i think i m not messing up anything on that front..
Sent from my LT18i using xda app-developers app

Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.

I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?

freakin.ro said:
I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?
Click to expand...
Click to collapse
I have Arc S..n i did try wid doomkernel as well..same result..

sinkster said:
Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.
Click to expand...
Click to collapse
I had stock ics rom only when i started..n again have gone back to the same now..i tried it a no of times..but the problem persists..

Q:- So Important Xperia S WiFi Not Working

I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do

How is it not working? You can't acces wifi settings? Scanning doesn't result anything? You can connect but internet still doesn't work? Which kernel are you using?

Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S

Ben36 said:
Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
i already did what u said ... and it Just keep searching for networks for hours and nothing Happens.... :S Really i got Mad

Keep In Mind That I Have Backup For Ice cream Sandwich Rom On That Rom WiFi Working Normally
And Installed Nova Kernel... And Nova Rom.... Before Nova I Installed Paranoid and its Kernel and The Same Prop.
What I Have To Do....

That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S

Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app

anadarco7 said:
Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Bro I cant Find any module Working.. What To Do???

Ben36 said:
That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
OkaY But I Know No One Will Answer Me

Ask in the xsspeed kernel thread as there was definitely a flashable zip of wifi modules in there somewhere. But ages ago
Sent from my Jellybean Xperia S
---------- Post added at 11:26 AM ---------- Previous post was at 11:16 AM ----------
Found this -
http://db.tt/q6pBu6Ub
Sent from my Jellybean Xperia S

Here is the WiFi module link
http://www.sendspace.com/file/56jxga
Flash/paste it to /system/lib/modules
With correct permissions
X X
X
X
Reboot and than report

paste what????

after flashing and coping and fixing i reboot then its stopping on boot animation ... :S

Any 'help???

MaDa.. said:
Any 'help???
Click to expand...
Click to collapse
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app

Jmjguru said:
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
i didnt understand ...

I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S

MaDa.. said:
I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do
Click to expand...
Click to collapse
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium

seb_labine said:
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
How May I Change My Baseland....

Ben36 said:
I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
I Tried To Clean Install With Out Any More Data Its Same Prop..

CM10

Best build yet. Wondering if anyone else is experiencing GPS issues?

I was having issues with GPS and streaming music thru Bluetooth.
Sent from my XT907 using Tapatalk 2

stupid question but...
Where are you getting this build?

straylight said:
Where are you getting this build?
Click to expand...
Click to collapse
Here's the original thread, use the GAPPs from the OP:
http://forum.xda-developers.com/showthread.php?t=2012093&page=26
Here's the post with the revised ROM, thanks to mic213:
http://forum.xda-developers.com/showpost.php?p=40364244&postcount=257

Hyro864 said:
I was having issues with GPS and streaming music thru Bluetooth.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Bluetooth problem is with ASOP 4.2.1 builds its fixed in 4.2.2 I think.

edit: sorry for grammatical errors, im still upset it took four hours to get this phone back working again after doing a clean wipe
Interesting, I tried to install it, and was successful...but the keyboard doesnt work, every five seconds, i got a FC with the aosp keyboard. tried looking for another keyboard, but i cant type it in, so i guess i may have to put the apk on my sd card...also wifi doesnt want to turn on...is there no launcher in this rom? the home button doesnt work
to add, i have unlocked the bootloader, so im thinking this is a cosunmer-turned-into-a-dev phone...but i read that the rom was hybird...i really dont like safestrap, as it takes long to build a slot, so i figured unlocking the bootloader would be easy enough...but no...im using cwm 6.0.x

Herc08 said:
edit: sorry for grammatical errors, im still upset it took four hours to get this phone back working again after doing a clean wipe
Interesting, I tried to install it, and was successful...but the keyboard doesnt work, every five seconds, i got a FC with the aosp keyboard. tried looking for another keyboard, but i cant type it in, so i guess i may have to put the apk on my sd card...also wifi doesnt want to turn on...is there no launcher in this rom? the home button doesnt work
to add, i have unlocked the bootloader, so im thinking this is a cosunmer-turned-into-a-dev phone...but i read that the rom was hybird...i really dont like safestrap, as it takes long to build a slot, so i figured unlocking the bootloader would be easy enough...but no...im using cwm 6.0.x
Click to expand...
Click to collapse
Which build are you using?
Sent from my XT907 using xda premium

Leraeniesh said:
Which build are you using?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
the beta i think, it was on hashofcodes' goo account...it is 4.1.2, i cant remember the date it is
however, i figure out how to install stock roms with an unlocked bootloader

Herc08 said:
the beta i think, it was on hashofcodes' goo account...it is 4.1.2, i cant remember the date it is
however, i figure out how to install stock roms with an unlocked bootloader
Click to expand...
Click to collapse
Try mic213's latest builds (last few pages of CM10 thread)
Sent from my XT907 using xda premium

Leraeniesh said:
Try mic213's latest builds (last few pages of CM10 thread)
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Yeah the one on Hash's account is buggy ATM
Sent from my XT907 using Tapatalk 2

Hmm thanks. That's the one many threads recommend
Sent from my Carbon-ize Evita using xda-developers app

RikRong said:
Here's the original thread, use the GAPPs from the OP:
http://forum.xda-developers.com/showthread.php?t=2012093&page=26
Here's the post with the revised ROM, thanks to mic213:
http://forum.xda-developers.com/showpost.php?p=40364244&postcount=257
Click to expand...
Click to collapse
^^^Just a few posts above yours. Try it out. It seems to be the most stable build.
Herc08 said:
edit: sorry for grammatical errors, im still upset it took four hours to get this phone back working again after doing a clean wipe
Interesting, I tried to install it, and was successful...but the keyboard doesnt work, every five seconds, i got a FC with the aosp keyboard. tried looking for another keyboard, but i cant type it in, so i guess i may have to put the apk on my sd card...also wifi doesnt want to turn on...is there no launcher in this rom? the home button doesnt work
to add, i have unlocked the bootloader, so im thinking this is a cosunmer-turned-into-a-dev phone...but i read that the rom was hybird...i really dont like safestrap, as it takes long to build a slot, so i figured unlocking the bootloader would be easy enough...but no...im using cwm 6.0.x
Click to expand...
Click to collapse

Hyro864 said:
I was having issues with GPS and streaming music thru Bluetooth.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Yes， streaming music thru Bluetooth won't work in cm10
GPS hasn't been tried yet , I don't use this.

so any fixes on CM10 gps? Someone said to flash to a stock based rom, get a gps lock then flash CM10.
which roms are stocked based?
once you get a gps lock, when installing CM10, do you do a clean wipe in CMW?

mightmuki said:
so any fixes on CM10 gps? Someone said to flash to a stock based rom, get a gps lock then flash CM10.
which roms are stocked based?
once you get a gps lock, when installing CM10, do you do a clean wipe in CMW?
Click to expand...
Click to collapse
Stock ROMs you can get here , or you can use this
I have succes after next:
1. Install AU mod
2. Lock GPS
3. Reboot to TWRP
4. Wipe cache / dalvik and factory reset (DO NOT WIPE SYSTEM)
5. install CM10 % GAPPS
6. Just enjoi! ):laugh:

St.Noigel said:
Stock ROMs you can get here , or you can use this
I have succes after next:
1. Install AU mod
2. Lock GPS
3. Reboot to TWRP
4. Wipe cache / dalvik and factory reset (DO NOT WIPE SYSTEM)
5. install CM10 % GAPPS
6. Just enjoi! ):laugh:
Click to expand...
Click to collapse
Its okay to flash an AU rom in for USA ?

mightmuki said:
Its okay to flash an AU rom in for USA ?
Click to expand...
Click to collapse
Do you mean in Verizon XT907?
I flash AU on my XT907 Verizon. It`s OK. But i have 2G.. I don`t know what about LTE or 3G operators..

mightmuki said:
so any fixes on CM10 gps? Someone said to flash to a stock based rom, get a gps lock then flash CM10.
which roms are stocked based?
once you get a gps lock, when installing CM10, do you do a clean wipe in CMW?
Click to expand...
Click to collapse
Every ROM listed for the RazrM (so far) is stock based, except CM10 and CM 10.1 . All the ones posted in this forum and DroidRzr were designed to be used with Safestrap and they are based on stock. Yes, you need to do a clean wipe for any ROM you install. However, I flashed Rage two nights ago and wiped cache/dalvik, factory data reset, but I DID NOT wipe system. It flashed perfectly. After you wipe, reboot recovery and mount system. After you wipe, TWRP says the system is mounted, but it is not. If you flash CM, you will need to flash a stock boot.img before you can go back to stock ROM.

RikRong said:
Every ROM listed for the RazrM (so far) is stock based, except CM10 and CM 10.1 . All the ones posted in this forum and DroidRzr were designed to be used with Safestrap and they are based on stock. Yes, you need to do a clean wipe for any ROM you install. However, I flashed Rage two nights ago and wiped cache/dalvik, factory data reset, but I DID NOT wipe system. It flashed perfectly. After you wipe, reboot recovery and mount system. After you wipe, TWRP says the system is mounted, but it is not. If you flash CM, you will need to flash a stock boot.img before you can go back to stock ROM.
Click to expand...
Click to collapse
AOKP is AOSP based too... We just got a port of it
Sent from my XT907 on CM10.1 using Tapatalk 2

sloosecannon said:
AOKP is AOSP based too... We just got a port of it
Sent from my XT907 on CM10.1 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I forgot about that one.

[Q] Wifi brick while flashing Custom ROM

The wifi brick problem happened after installing the following rom
[ROM][MIUI][4.1.2][OTA] MiuTu v2.0 [Multilang/Smooth++/Battery]
while going through the setup for the first time the wifi signal came after i tried to connect to the network then the signal was gone
i thought that this may be the problem with the rom then
i tried other roms (ICS and JB) and kernels although the problem is still there
so please help me to fix this problem

kunal.kdmw said:
The wifi brick problem happened after installing the following rom
[ROM][MIUI][4.1.2][OTA] MiuTu v2.0 [Multilang/Smooth++/Battery]
while going through the setup for the first time the wifi signal came after i tried to connect to the network then the signal was gone
i thought that this may be the problem with the rom then
i tried other roms (ICS and JB) and kernels although the problem is still there
so please help me to fix this problem
Click to expand...
Click to collapse
have you done Pristine wipe?
Sent from my GT-S6500 using xda app-developers app

TiTAN-O-One said:
have you done Pristine wipe?
Sent from my GT-S6500 using xda app-developers app
Click to expand...
Click to collapse
I have done data wipe, cache partition wipe and dalvik cache wipe only and there is no any pristine wipe.
now i am trying to go back to the manufacturer OS by flashing the Stock rom through odin but it Stucks at the screen of Setup connection
so please help me out

Pristine is not an option in CWM Recovery but a way on how to get your system clean for a clean installation.
Pepoluan made a guide on how to do thiy you can read here: http://forum.xda-developers.com/showthread.php?t=2044861&highlight=pristine
About sitcking while flashing with Odin you maybe are doing something wrong. For example forgetting to put a check at a field or there is something wrong with your hardware. Try an other USB port and make sure it´s a native one but not a hub.

Thanks
honeyx said:
Pristine is not an option in CWM Recovery but a way on how to get your system clean for a clean installation.
Pepoluan made a guide on how to do thiy you can read here: http://forum.xda-developers.com/showthread.php?t=2044861&highlight=pristine
About sitcking while flashing with Odin you maybe are doing something wrong. For example forgetting to put a check at a field or there is something wrong with your hardware. Try an other USB port and make sure it´s a native one but not a hub.
Click to expand...
Click to collapse
Thanks for your support and help but i found another way to fix my device
i downloaded the ancora file and the firmware and flashed it with odin multi downloader and the flashing worked
once again thanks for your help:laugh::good: