I installed the stable cm9..flashed the fxp133 kernel..the installation went smooth but my screen touch function is lost..Any ideas??
Eventually restoring to the stock kernel with JJ hybrid..and yeah the touch is working with this one. So is the problem cos of the kernel or the ROM??
I ll tell the sequence which i followed..let me know where i went wrong..i downloaded the ROM, extracted the boot.img, copied the original cm9 zip into the root of SD..used fastboot mode of flashtools to flash the kernel boot.img..then went into CWM..wiped out SD data..then cache..and then dalvik..and then proceeded to install zip from sd..it installed fine..and then i rebooted..it showed d FXP kernel logo and then CM9 bootscreen and then it loaded like it should..BUT the touchscreen isnt working at all..the hardware keys-power and back i checked were working but not the touchscreen..
Where did I go wrong..i am on baseband -72..bootloader unlocked..
You've installed correctly. Possibly a corrupt download, try re-downloading the zip.
sinkster said:
You've installed correctly. Possibly a corrupt download, try re-downloading the zip.
Click to expand...
Click to collapse
I downloaded both official stable CM9 as well as the FXP one on uploaded.to...tried with each of them but with the same result..both cant be corrupt n it wouldnt have extracted if it was a corrupt download anyways..m still wondering whats wrong..
Also I flashed doomkernel and tried installing..again the same..touchscreen still doesnt work..aarghh..
Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium
I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app
Braayhaan said:
Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium
Click to expand...
Click to collapse
iwarind said:
I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Wiping battery stats does nothing to your phone. It doesn't change anything, it doesn't affect anything. It cannot be the problem.
Then what do u think the problem is..infact the installation works fine so i think i m not messing up anything on that front..
Sent from my LT18i using xda app-developers app
Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.
I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?
freakin.ro said:
I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?
Click to expand...
Click to collapse
I have Arc S..n i did try wid doomkernel as well..same result..
sinkster said:
Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.
Click to expand...
Click to collapse
I had stock ics rom only when i started..n again have gone back to the same now..i tried it a no of times..but the problem persists..
Related
Don't understand why..
I flashed the boot.img included in the zip via fastboot
then i went into recovery and installed FXPCM7
rebooted
Stuck on FreeXperia logo for 30mins.
Whats going on?
After you flash the kernel boot into recovery...
wipe data/factory reset
wipe cache
then go into advanced then wipe dalvik cache
Then flash the CM7.zip
Let me know how it goes - good luck
- wipe data/factory reset
- wipe cache partition
- advance > dalvik cache
install FXPCM7
tried it, still stuck on FreeXperia logo
do i need to be on stock when installing it?
I am currently on the enhanced v2 firmware with doom kernel..
update:
tried stock too, doesnt work..
Hm try this
Redownload CM7
using flash tool flash this FTF - It has the newest baseband and largest user partiton
flash the kernel that came with CM7
Enter recovery and..
> factory reset
> wipe cache partiton
go into advanced and
>clear dalvik cache
Then install the CM7 zip from sd-card let me know how it goes
Thanks, but that was the firmware i was on.
I tried that method twice but the same thing kept happening to me
stuck at FreeXperia logo
Just to check if the problem is specific only to CM7 rom itself try installing another rom like Gin2Jellybean - Good luck
I have used various ROMS (all working perfectly) such as:
Gin2ICS/JellyBean
xDarkICS 4.0.3
Xperia NXT
JokaWild
Advanced Stock
So I think it may be just a problem with CM7?
Oh that's strange, try to download it again or try another build from here
tried the stable build now.. same problem :/
EDIT:
Tried flashing doom kernal, this time it actually boots.. touch screen doesnt work but it boots..
Is there another kernal i can use that works?
help please? would love to get cm7
Gamepad doesn't work on CM7. Flashing the ICS fixes kinda works
Sent from my R800i using xda premium
CTU_Loscombe said:
Gamepad doesn't work on CM7. Flashing the ICS fixes kinda works
Sent from my R800i using xda premium
Click to expand...
Click to collapse
lol?
Sent from my Xperia Play
AudioCreaper said:
lol?
Sent from my Xperia Play
Click to expand...
Click to collapse
Why lol?
I couldn't get the pad to work so I flashed the ICS Circle fix and the CM9 gamepad one and it worked. For emulators anyway
If theres a proper fix please let me know
Sent from my R800i using xda premium
I finally figured out how to do it. Go in CWM and delete user data, dalvik cache, cache, and then go to the Mounts and Storage menu, and Format the System Partition. Make sure not to clear the SD partition on accident. Anyways, this is the only way I could get it to work
Sent from my R800x using xda app-developers app
Phascinate said:
I finally figured out how to do it. Go in CWM and delete user data, dalvik cache, cache, and then go to the Mounts and Storage menu, and Format the System Partition. Make sure not to clear the SD partition on accident. Anyways, this is the only way I could get it to work
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
didnt work for me >_<
CTU_Loscombe said:
Why lol?
I couldn't get the pad to work so I flashed the ICS Circle fix and the CM9 gamepad one and it worked. For emulators anyway
If theres a proper fix please let me know
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Isnt the topic of this thread helping the op to get cm7 working on his phone? And you're talking about the circle button.
Sent from my Xperia Play
I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do
How is it not working? You can't acces wifi settings? Scanning doesn't result anything? You can connect but internet still doesn't work? Which kernel are you using?
Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S
Ben36 said:
Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
i already did what u said ... and it Just keep searching for networks for hours and nothing Happens.... :S Really i got Mad
Keep In Mind That I Have Backup For Ice cream Sandwich Rom On That Rom WiFi Working Normally
And Installed Nova Kernel... And Nova Rom.... Before Nova I Installed Paranoid and its Kernel and The Same Prop.
What I Have To Do....
That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S
Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app
anadarco7 said:
Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Bro I cant Find any module Working.. What To Do???
Ben36 said:
That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
OkaY But I Know No One Will Answer Me
Ask in the xsspeed kernel thread as there was definitely a flashable zip of wifi modules in there somewhere. But ages ago
Sent from my Jellybean Xperia S
---------- Post added at 11:26 AM ---------- Previous post was at 11:16 AM ----------
Found this -
http://db.tt/q6pBu6Ub
Sent from my Jellybean Xperia S
Here is the WiFi module link
http://www.sendspace.com/file/56jxga
Flash/paste it to /system/lib/modules
With correct permissions
X X
X
X
Reboot and than report
paste what????
after flashing and coping and fixing i reboot then its stopping on boot animation ... :S
Any 'help???
MaDa.. said:
Any 'help???
Click to expand...
Click to collapse
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app
Jmjguru said:
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
i didnt understand ...
I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S
MaDa.. said:
I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do
Click to expand...
Click to collapse
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium
seb_labine said:
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
How May I Change My Baseland....
Ben36 said:
I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
I Tried To Clean Install With Out Any More Data Its Same Prop..
Hi guys .. is there any good custom ROM for xperia r800x cdma locked bl? if so can u guys help me out pointing me to right direction? i appreciate any help .. im currently rooted and installed xparts to get cwm .. thnx guys.
Mingal said:
Hi guys .. is there any good custom ROM for xperia r800x cdma locked bl? if so can u guys help me out pointing me to right direction? i appreciate any help .. im currently rooted and installed xparts to get cwm .. thnx guys.
Click to expand...
Click to collapse
There is currently 2 locked booloader roms for the R800x. Which is gbtweaked and cola.
chery2k said:
There is currently 2 locked booloader roms for the R800x. Which is gbtweaked and cola.
Click to expand...
Click to collapse
thnx man i will look for them i appreciate it .. also would u mind telling if the cwm from xparts app all i need to install the rom? can i keep the stock kernel from my 2.3.3?
Use version 5 or below... The newest version doesn't work correctly.
"We are the fire that will consume them, belly and bowel, head and heart, many flames of us, but one fire."
Root GB 2.3.3. Use CWM Installer v5 to install CWM. Flash NXT Lite rom: http://forum.xda-developers.com/showthread.php?t=2067356&highlight=cdma. It work with stock kernel, which is why you don't need to unlock bootloader. But remember its free to unlock it from Sony site. Personally I recommend using Flashtool to update to kernel 2.3.4, when you flash the ftf you can uncheck everything, but the kernel.
eksasol said:
Root GB 2.3.3. Use CWM Installer v5 to install CWM. Flash NXT Lite rom: http://forum.xda-developers.com/showthread.php?t=2067356&highlight=cdma. It work with stock kernel, which is why you don't need to unlock bootloader. But remember its free to unlock it from Sony site. Personally I recommend using Flashtool to update to kernel 2.3.4, when you flash the ftf you can uncheck everything, but the kernel.
Click to expand...
Click to collapse
Hey thnx for all the help guys i will try them out see wich one i like ... if i get everything working fine i will post it here .. if u guys need any help wit anything pm me ..
Hey guys I stumble on. Installin nxt rom I get a error saying md5 Mismatch u guys know nthing bout this? Thnx
Sent from my R800x using xda app-developers app
It mean the checksum didn't match up which mean the rom file is corrupt. Do a disk check on your sdcard.
Sent from XDA app
---------- Post added at 10:28 AM ---------- Previous post was at 10:24 AM ----------
Also make sure if you are downloading a flashable rom or a Nandroid backup. If it's a nandroid you have to put it in /sdcard/clockworkmod/backup and Restore it.
Sent from XDA app
Mingal said:
Hey guys I stumble on. Installin nxt rom I get a error saying md5 Mismatch u guys know nthing bout this? Thnx
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
If you changed or removed a system file on your stock rom, whether it was a browser or one of the gapps, you'll get an md5 mismatch. This has happened to me on one of my tablets, I flashed a stock factory rom to put everything back into order, then flashed the custom rom after, and all was well.
Thnx guys I will try the scan disk on card see if it work when I get home ... N I never removed anything from previous stock rom so I dnt know ... also so a terminal emulator fix but dnt know how to do it I'll keep u guys posted
thnx
Sent from my R800x using xda app-developers app
Follow the instruction from the rom thread, it's a nandroid, you have to restore it, not flash.
Sent from XDA app
Alright so after trying all kinds of stuff I found a fix for md5 Miss match .. I simply just took all the spaces of the folder name .. example: rom super 1 I just renamed romsuper1. OK so I followed the rom tutorial and all went good but after I rebooted it started with Sony Ericson logo then a Expedia logo the went back to Sony logo then Expedia logo n so so it wouldn't boot ... so i did the same process again ass tutorial but this time didn't clean dalvik cache like tutor said too before reboot. And it started fine .. my question is .. is my from now messed up maybe cuz I sent clean dalvik? Should I do all over again? I appreciate all patience and help
Sent from my R800x using xda app-developers app
So did you restore the nandroid backup and booted into the new NXt rom successfully? Then you should just do a factory reset.
Before you flash a rom or restore you should always do a factory reset or the phone might not boot, in CWM this is equivalent to choosing "wipe data/cache", this will encompass the wiping of dalvik cache which is contained within /data partition. Doing this will clean off personal data.
Sometimes you have to "wipe /system partition" as well, this is equivalent to wiping C:/Windows, as in the entire OS is gone. Then you have to restore a nandroid or flash the rom otherwise the phone has no OS to boot into.
You can choose to wipe only cache and dalvik cache, these are just temporarily files. I do it before making a nandroid backup.
Sent from XDA app
Yes I got it to work successfully.. but I did not do a factory reset after.. wouldn't that wipe the from I just recovered? Thnxs for all ur help man.
Sent from my R800x using xda app-developers app
I have experiencing this issue with Bluetooth and I am unable to find any cure.:crying:
No matter which ROM I have installed or which kernel, some times when I try to turn on the Bluetooth the whole phone crashes and gets a bootloop. The only way I am able to fix this issue is either reinstall the ROM / restore from earlier nanobackup .
Has anyone else experienced anything similar to this.
Have you tried testing it on stock ROM? Flash ftf and enable bluetooth if your phone crashes then it's a hardware issue.
pypcier said:
Have you tried testing it on stock ROM? Flash ftf and enable bluetooth if your phone crashes then it's a hardware issue.
Click to expand...
Click to collapse
It's been a while since I have used stock ROM but guess I am gonna have to do so to figure this out .:silly:
Yeah just do a backup and try it out. Flashing to stock is always the best option ; D
Hey I had that issue,it used to work sometimes and sometimes just revert back to the xperia logo,and it caused me to change a lotta roms,i believe ur on ICS .For me GB and Jb worked fine(although i didnt try flashin a stock .ftf...) plz report if after flashing stock and then flashing same rom,same kernel the issue disappears..
Stanleykyn said:
I have experiencing this issue with Bluetooth and I am unable to find any cure.:crying:
No matter which ROM I have installed or which kernel, some times when I try to turn on the Bluetooth the whole phone crashes and gets a bootloop. The only way I am able to fix this issue is either reinstall the ROM / restore from earlier nanobackup .
Has anyone else experienced anything similar to this.
Click to expand...
Click to collapse
Just wipe delvik cache from cwm recovery, now ur phone will boot.. Now extract bluetooth.apk from stock firmware & push it to system/apps with proper permission... Done..
OR, reflash stock rom with full wipe using flashtool
Sent from my MT11i using Tapatalk 2
Samak46 said:
Just wipe delvik cache from cwm recovery, now ur phone will boot.. Now extract bluetooth.apk from stock firmware & push it to system/apps with proper permission... Done..
OR, reflash stock rom with full wipe using flashtool
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
Can you put the bluetooth.apk download link here?! I'm facing the same problem with my xperia arc s...
kurniawans13 said:
Can you put the bluetooth.apk download link here?! I'm facing the same problem with my xperia arc s...
Click to expand...
Click to collapse
Just flash a stock ROM, it should fix the bluetooth.
僕のLT18iから送られてきた
popthosegaskets said:
Just flash a stock ROM, it should fix the bluetooth.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I've already did that,,but after few days,it happen again...
Sent from my Lenovo A60+ using xda app-developers app
Hi guys, I've flashsed the CM9 nightly ROM on my Xplay with lupus gb+ics kernel (should support CM9 too) but I'm stuck at the boot animation of CM9...I left it booting something like 10 minutes but it just doesn't load.
ROM downloaded from the official CM repository. Tried clean install with full wipe (data,system,cache,dalvik cache + fix permission after flashing process of the ROM) but still doesn't work.
Any idea ?
Did you try a different kernel?
Techniques said:
Did you try a different kernel?
Click to expand...
Click to collapse
lupus cm9 480p gives me an error while installing the ROM
WhiteWashed said:
Hi guys, I've flashsed the CM9 nightly ROM on my Xplay with lupus gb+ics kernel (should support CM9 too) but I'm stuck at the boot animation of CM9...I left it booting something like 10 minutes but it just doesn't load.
ROM downloaded from the official CM repository. Tried clean install with full wipe (data,system,cache,dalvik cache + fix permission after flashing process of the ROM) but still doesn't work.
Any idea ?
Click to expand...
Click to collapse
Maybe the zip is cropted redownload it and see what happen
Sent from my R800i using XDA Premium 4 mobile app
raminta said:
Maybe the zip is cropted redownload it and see what happen
Sent from my R800i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm now trying with turbokernel, if it won't work I will redownload.
EDIT: FIxed, turbokernel worked fine for me thanks guys.