Develop Bugs

Kingdom Rewind Sensless 3d

New to XDA, first post ever. Has anyone tried the new Kingdom Sensless 3d release and if so can you tell me if youtube is working as well as 720p video recording? Tried to post this in the developer section under the proper thread but it wouldnt let me since im new. Would love to know overall thoughts on this release as well. Thank you!
Sent from my Incredible using XDA Premium App

I believe YouTube works with a workaround (wifi has to be on but not necessarily connected), but 720p isn't functional yet.

is my daily driver everything is working fine there is a lag on the 720 but the devs have explained that is do to the fact that they dont have the codes or something to build new kernels.. youtube works just fine... if you haven't try it yet just flash it... you wont regret it..

Sounds good. Thank you. And just to be sure, i boot into recovery, do a factory restore, wipe cache, then install the zip from sd card. Is that the proper method to install this or will that screw up my phone? Thanks again!
Sent from my Incredible using XDA Premium App

Also, i currently have a different sense 3.0 rom installed. Do i have to flash back to the stock rom before i attempt to install a new one or can i flash a new rom over the one i currently have installed? Thanks again peeps!
Sent from my Incredible using XDA Premium App

No you don't go back to stock before flashing, yes go to recovery do factory reset, then go to mounts and storage and wipe boot, system, data, cache go back under advanced & wipe dalvik. Now you can install your ROM
Sent from my ADR6300 using XDA Premium App

Thanks very much. Interestingly, when i go into recovery it brings me to a clockwork recovery screen where i cant do some of the things u mentioned. I only have the options to do a factory reset and wipe cash. Is that enough? Does it matter what order u do them in? I also noticed that in titanium backup there is an option to delete the dalvic from there. Is that ok to do?
Sent from my Incredible using XDA Premium App

saintsfan09 said:
Thanks very much. Interestingly, when i go into recovery it brings me to a clockwork recovery screen where i cant do some of the things u mentioned. I only have the options to do a factory reset and wipe cash. Is that enough? Does it matter what order u do them in? I also noticed that in titanium backup there is an option to delete the dalvic from there. Is that ok to do?
Sent from my Incredible using XDA Premium App
Click to expand...
Click to collapse
Go into advance in cwm to wipe delvic
Sent from my Dinc

Also, you can format system in the mounts and storage menu. The rom's install script should include this, but never hurts to be safe.

[Q] cyanogeon7 nightly build problem

i find that the nightly build is cool and is awesome. the problem is when i use system panel task manager, the phone reboots. i dont know why and its more laggy than the cm7 mod please tell me its me doing something wrong not my phone's or the mod's fault.

and it svery irritating that it keeps hanging. please someone help me with the nightly mod thing i want to use.

Go for nightly#205. And do a full wipe including data,cache,dalvic cache, and perform a factory resetting from cwm before you flash the nightly. Also use latest buzz kernal so that you can overclock your phone.
Sent from my HTC Wildfire using XDA App

I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?

ongtengjun said:
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
Click to expand...
Click to collapse
i had problem with my previous nightly # 177 when i used darktremor APP2SD script .. even when i re flashed nightly #205 .. things were the same (Talking about random reboots upon opening task manager / and installing apps etc. ) ..
then i repartitioned my SD and didn't flashed the script... now its fine .. ..

so how did you install it? how to repartition sd card and not flash the script? how to install?

V0odo0 said:
i had problem with my previous nightly # 177 when i used darktremor APP2SD script .. even when i re flashed nightly #205 .. things were the same (Talking about random reboots upon opening task manager / and installing apps etc. ) ..
then i repartitioned my SD and didn't flashed the script... now its fine .. ..
Click to expand...
Click to collapse
Lol you may have used beta 4 script, try beta 3, need to use atleast ext3 as your secondary partition. Try it with latest original cwm recovery. 5.xxx to partition. Do a clean install after partition.
And a personal suggestion. S2e app in market is good than dta2sd, though it have not much functions, but what it have, it does its best. I use it.
Sent from my HTC Wildfire using XDA App

ongtengjun said:
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
Click to expand...
Click to collapse
Dude, explore options in cwm, don't do formatting boot, system, data, unless you learn what it does.
Options may vary from version to versions of cwm. So you have to say which cwm version you have. Mine is latest 5.xxx.
In it, data- factory format( user data or wipe user data, which ever it is called) is in main menu. And dalvic cache wipe is in advanced menu.
Lol you must carefully read topic named" complete wildfire index, then ask doubts, after all you can learn new things from every topic.
Your kernal will be in that topic. Check it out.
Sent from my HTC Wildfire using XDA App

another problem
now i got another problem. my wildfire will hang every now and then and i have to pluck out the battery and switch it back on. its very irritating and having to keep doing that will kill my bat very quickly so could anyone tell me any solutions?

To solve your problem, you must say. Your current configuration, rom, kernal, radio, tweeks, and what have you done just before you got the error
Sent from my HTC Wildfire using XDA App

well i am using the cm7 nightly build #205. kernel is buzz-kernel-2.6.35. i just downloaded some apps that were in my phone when i was using cm7 stable. and there wasnt a problem. do i have to upgrade to latest build and kernel? oh and just a question. if i want to upgrade from #205 to #208, do i have have to like wipe my data and cache and dalvik cache? i wouldnt wanna redownload and change everythin again

You can install the nightlies on top of one another without wiping anything, sometimes it seems better to wipe the cache to me but not always necessary, leave data alone.
Word of warning though, always make a nandroid backup before installing a new rom, although they're stable they are still called experimental for a reason, and sometimes (not very often) things can still go wrong.
Sent from my HTC Wildfire using xda premium

i wiped both the dalvik and partition cache and installed the #208 nightly build and the latest kernel but then the phone would just restart automatically. do i have to wipe data as well?

Yes do a "Wipe Data / Factory Reset" in Clockworkmod if it is giving you issues. Then try a fresh install and check again for instability.
Note - Performing a Wipe Data / Factory Reset will erase all data (Except SD Card)

well i not sure but i think the problem still occurs.. yes it does. i wiped data, cache and dalvik cache, did a install using cwm and it still reboots WHAT TO DO NOW

showlyshah said:
Lol you may have used beta 4 script, try beta 3, need to use atleast ext3 as your secondary partition. Try it with latest original cwm recovery. 5.xxx to partition. Do a clean install after partition.
And a personal suggestion. S2e app in market is good than dta2sd, though it have not much functions, but what it have, it does its best. I use it.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Hey thanks dude .. yup i was using beta 3 last time.. beta 4 was a disaster to CM7.. .. i tried that too ..
but i think my partition was ext2 coz i am using CWM 3 .. will try with CWM 5 .. and sure... S2e too ...

Do you let it boot up before flashing the kernel?
Sent from my HTC Wildfire using xda premium

For i always keep a backup of my contacts in sd. Also apps using titanium backup, i had never used a nandroid backup till now, i alwayz do fresh installs, wiping every thing but not fat32. And always keep things updated.
Sent from my HTC Wildfire using XDA App

ok now i have another problem. my phone will just reboot after hanging when i open system panel task manager. please some one help me

ongtengjun said:
ok now i have another problem. my phone will just reboot after hanging when i open system panel task manager. please some one help me
Click to expand...
Click to collapse
dude is it the same one you had before? thats why we mention to give your current spec. with out it we cant do any thing or we cant help you.

Touchscreen not working on stable CM9 FXP133

I installed the stable cm9..flashed the fxp133 kernel..the installation went smooth but my screen touch function is lost..Any ideas??
Eventually restoring to the stock kernel with JJ hybrid..and yeah the touch is working with this one. So is the problem cos of the kernel or the ROM??
I ll tell the sequence which i followed..let me know where i went wrong..i downloaded the ROM, extracted the boot.img, copied the original cm9 zip into the root of SD..used fastboot mode of flashtools to flash the kernel boot.img..then went into CWM..wiped out SD data..then cache..and then dalvik..and then proceeded to install zip from sd..it installed fine..and then i rebooted..it showed d FXP kernel logo and then CM9 bootscreen and then it loaded like it should..BUT the touchscreen isnt working at all..the hardware keys-power and back i checked were working but not the touchscreen..
Where did I go wrong..i am on baseband -72..bootloader unlocked..

You've installed correctly. Possibly a corrupt download, try re-downloading the zip.

sinkster said:
You've installed correctly. Possibly a corrupt download, try re-downloading the zip.
Click to expand...
Click to collapse
I downloaded both official stable CM9 as well as the FXP one on uploaded.to...tried with each of them but with the same result..both cant be corrupt n it wouldnt have extracted if it was a corrupt download anyways..m still wondering whats wrong..
Also I flashed doomkernel and tried installing..again the same..touchscreen still doesnt work..aarghh..

Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium

I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app

Braayhaan said:
Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium
Click to expand...
Click to collapse
iwarind said:
I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Wiping battery stats does nothing to your phone. It doesn't change anything, it doesn't affect anything. It cannot be the problem.

Then what do u think the problem is..infact the installation works fine so i think i m not messing up anything on that front..
Sent from my LT18i using xda app-developers app

Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.

I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?

freakin.ro said:
I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?
Click to expand...
Click to collapse
I have Arc S..n i did try wid doomkernel as well..same result..

sinkster said:
Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.
Click to expand...
Click to collapse
I had stock ics rom only when i started..n again have gone back to the same now..i tried it a no of times..but the problem persists..

Help! flashing cm10

hello guys, when i did this method (flashing the rom) and worked fine but when i turned on my phone and get it into recovery mode (purple led) , Its not on CWM but in TeamWinrecovery, (i know that i have CWM installed and tried cwm recovery before any flashing) Sooo, i wipe data/ dalvik etc then installed CM10 and GAPPS, and reboot, now im stuck on the cyanogen logo, i kept on rebooting it and doing the same procedure (wipe data/dalvik, install cm10 gapps) same results. Stuck on cyanogenmod logo but the circle thing is still moving, I havent tried waiting for one hour or two on that cyanogenmod boot logo. Should i really flash any roms using CWM? how do i install CWM without the phone turning on? pls help
Update: Left it on cyanogenmod logo last night and i think my phone is now on low battery status, What should i do?

Have you tried formatting the system as well in mounts and storage?
Sent from my LT26i using xda premium

No
danlivesey said:
Have you tried formatting the system as well in mounts and storage?
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Not yet, I'm afraid i might brick my phone,I don't want to mess with stuff i don't know, is my phone bbricked?

Should i format the system as well?
danlivesey said:
Have you tried formatting the system as well in mounts and storage?
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
after formatting the system, wipe cache/data/dalvik, should i install gapps and cm10?

Brick on 6.2.B.1.96 LT26i while flashing custom ROMs

I have a 6.2.B.1.96 build LT26i Xperia S.
I rooted my phone using DoomLord and the recovery using cray_Doze methods.
Following ROM instructions and a myriad of other combos like formatting phone, wiping cache, dalvik cache, applying permissions, formatting /system etc. my phone gets bricked after I select reboot system or power off in the recovery menu.
After I press the. power button, it vibrates once and nothing shows up on the screen. Only way to get the phone running was to flash a stock ftf using FlashTool
I've tried multiple ROMs, including CM, SlimBean and PacMan, all of them yield the same result.
Is there anyway I can fix the problem?

did you unlock your bootloader?
Sent from my LT26i using XDA Premium 4 mobile app

Envious_Data said:
did you unlock your bootloader?
Sent from my LT26i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes it is :/

crashdrive_94 said:
Yes it is :/
Click to expand...
Click to collapse
verry weird, do you get any errors when you open your recovery
well this is how i flash,
wipe system dalvik cache and data
flash rom
Sent from my LT26i using XDA Premium 4 mobile app

Envious_Data said:
verry weird, do you get any errors when you open your recovery
well this is how i flash,
wipe system dalvik cache and data
flash rom
Sent from my LT26i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope, I don't get any errors.
So you wipe system dalvik cache and data, flash the rom, and what do you do before and after gapps?

crashdrive_94 said:
Nope, I don't get any errors.
So you wipe system dalvik cache and data, flash the rom, and what do you do before and after gapps?
Click to expand...
Click to collapse
I ususualy flash Gapps after ROM, then i just reboot and it usualy works , unless it says not to flash Gapps with rom

Envious_Data said:
I ususualy flash Gapps after ROM, then i just reboot and it usualy works , unless it says not to flash Gapps with rom
Click to expand...
Click to collapse
I tried all of that. None of it works, the phone still bricks.
You're sure that you did it in the order specified?
Format /system
Wipe dalvik
Wipe cache
Wipe data
Right?

crashdrive_94 said:
I tried all of that. None of it works, the phone still bricks.
You're sure that you did it in the order specified?
Format /system
Wipe dalvik
Wipe cache
Wipe data
Right?
Click to expand...
Click to collapse
i dont realy always do it in that order, it just depends on how i remember it , sometimes i forget to wipe system, before flashing rom
Well check this
Make sure zip isnt corrupted, copying to your device can corrupt sometimes
ALSO does it do it with all ROMS?, if yes then i generaly cant help you now :/

Envious_Data said:
i dont realy always do it in that order, it just depends on how i remember it , sometimes i forget to wipe system, before flashing rom
Well check this
Make sure zip isnt corrupted, copying to your device can corrupt sometimes
ALSO does it do it with all ROMS?, if yes then i generaly cant help you now :/
Click to expand...
Click to collapse
So far, yes, all ROMs.
Lemme try it with a ROM you've used. Which ones have you tried?

crashdrive_94 said:
So far, yes, all ROMs.
Lemme try it with a ROM you've used. Which ones have you tried?
Click to expand...
Click to collapse
All ROMS BUT
TrinityHaxxor's Rom/Kernel
AOCP
EXR Freedom
Older Roms without Download
MY COMMONLY USED ROMS
ACP Official ROM (My rom yay)
Pure CM10