I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do
How is it not working? You can't acces wifi settings? Scanning doesn't result anything? You can connect but internet still doesn't work? Which kernel are you using?
Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S
Ben36 said:
Try re flashing this way....
Assuming you did a backup before... (and was on pac18)
Wipe data factory reset
Wipe cache
Wipe dvalik
Format system
Flash rom
Fix permissions
Reboot up to start screen (as if it is first loaded screen)
Hold volume up and power to reboot into recovery.
Advanced restore the data only from your backup.
Wipe cache and dvalik again
Reboot
(will probably work from just backing up what you have now)
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
i already did what u said ... and it Just keep searching for networks for hours and nothing Happens.... :S Really i got Mad
Keep In Mind That I Have Backup For Ice cream Sandwich Rom On That Rom WiFi Working Normally
And Installed Nova Kernel... And Nova Rom.... Before Nova I Installed Paranoid and its Kernel and The Same Prop.
What I Have To Do....
That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S
Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app
anadarco7 said:
Surf in net and try to find WiFi modules.zip file for xsx and flash it that might help
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Bro I cant Find any module Working.. What To Do???
Ben36 said:
That's very strange. Ask the devs on the actual pax thread itself. Any times I've seen wifi problems its that wifi itself won't turn on at all. But you're saying it does turn on fine. But just won't find anything
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
OkaY But I Know No One Will Answer Me
Ask in the xsspeed kernel thread as there was definitely a flashable zip of wifi modules in there somewhere. But ages ago
Sent from my Jellybean Xperia S
---------- Post added at 11:26 AM ---------- Previous post was at 11:16 AM ----------
Found this -
http://db.tt/q6pBu6Ub
Sent from my Jellybean Xperia S
Here is the WiFi module link
http://www.sendspace.com/file/56jxga
Flash/paste it to /system/lib/modules
With correct permissions
X X
X
X
Reboot and than report
paste what????
after flashing and coping and fixing i reboot then its stopping on boot animation ... :S
Any 'help???
MaDa.. said:
Any 'help???
Click to expand...
Click to collapse
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app
Jmjguru said:
I'd say do a nandroid backup from recovery so you'll have it booting up again. If you have a backup that is.
Then either flash or copy the files don't think you have to do both. And its usually safer to flash as you'll gett the right permission on the files.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
i didnt understand ...
I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S
MaDa.. said:
I Installed Paranoid (Last Ver.) WiFi Not Working ..
Then... I installed Nova ( Last Ver..) WiFi Not Working..
What i Have To Do
Click to expand...
Click to collapse
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium
seb_labine said:
Can you change baseland on Xperia S ? Because I've got the same problem On my HTC and it was because of the Baseland...
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
How May I Change My Baseland....
Ben36 said:
I think he means restore your backup so its 'as before you tried the wifi mods'
Then just do one, like flash my zip and reboot rather than do it all at once
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
I Tried To Clean Install With Out Any More Data Its Same Prop..
Related
Hey guys I m very confused for getting cm7 file...actually I didn't found that...so plz if have direct link then plz upload here...
Thanx...
Sent from my MB525 using xda premium
http://defy.wdscript.fr/jordan-nightly/
Epsylon3 nightly version
All files are compulsory???
Sent from my MB525 using xda premium
use a stable version
[ http://download.cyanogenmod.com/?type=stable&device=umts_jordan ]
root your phone
install 2ndinit
copy cm7 zip to sd card
go to recovery mode
go custom recovery
select "choose a zip from sd card"
select cm7 zip
then install GAPPS [you can find here on XDA]
enjoy it
MrNiick said:
use a stable version
root your phone
install 2ndinit
copy cm7 zip to sd card
go to recovery mode
go custom recovery
select "choose a zip from sd card"
select cm7 zip
then install GAPPS [you can find here on XDA]
enjoy it
Click to expand...
Click to collapse
Have to agree here - the official CM7 version is very, very good. Our devs are rapidly finalizing CM9 too, but it's not ready for prime time yet.
Thanks dude
Sent from my MB525 using xda premium
Thanx buddy...for this easy info...
Sent from my MB525 using xda premium
Hey,
i tried to install it to my MB525. after installing the zip file i tried to reboot it, but it only showed up the boot screen for some hours. Now the phone turned off and doesnt start again?
I tried to plugin it into my PC but the only thing that happens is that the LED turns on (white).
Is there a way to restore it, or is it completely destroyed?
Thank you for help
Edit: sorry, right after posting it i tried to plugin it again and now I can see the Boot screen again
But i only saw it for some minutes and know it is turned off again. (except the LED)
Edit2: sometimes when i try to start my defy i can access the boot menu but then it turns off after some seconds, too :/
Do you know something to fix it?
Man this is the big problem...now I m confused for installing that zip...and i dont know the solution...
Experts plz help us...
Thanx...
Sent from my MB525 using xda premium
shaGGy5678 said:
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Does that mean you got your defy working again and you only want to try upgrading again, or do you have the same phone two times?
If you was able to restore your Phone: how?
first for sack148, did you wiped dalvik cache on recovery mode?
can you reach recovery mode?
now for shaggy
dude, it's safe, just don't forget to wipe dalvik cache, it can be the answer for sack148's problem
oh, and sorry for didn't mentioned it before, i didn't wiped dalvik cache and my defy works, :S
sorry again
Thanx NIICK...I already wipe that data...and now I am going to install that zip...
Sent from my MB525 using xda premium
just make sure you have a nandroid copy of your stock rom and a fully charge battery
Ohhh thanx mr. Mckarty...
Really. I dont know that...
Sent from my MB525 using xda premium
you don't really need a nandroid backup, it's just in case of something goes wrong, but, you always have all versions of stock sbfs here on XDA.
just follow my tuto, and you should be fine
Dude after installing cyanogenmod 7.1.0, my defy is not going further the boot screen untill the battery is drained, I am also unable to access the boot menu.. Please suggest the solution...
Sent from my MB526 using XDA
im not able to get to the screen where i can select the boot custom recovery it only has the options, wipe cache, wipe factory reset and reboot..
jlaloon said:
im not able to get to the screen where i can select the boot custom recovery it only has the options, wipe cache, wipe factory reset and reboot..
Click to expand...
Click to collapse
Do you install CWM room manag,2nd init?
---------- Post added at 05:45 AM ---------- Previous post was at 05:38 AM ----------
jlaloon said:
im not able to get to the screen where i can select the boot custom recovery it only has the options, wipe cache, wipe factory reset and reboot..
Click to expand...
Click to collapse
MrNiick said:
you don't really need a nandroid backup, it's just in case of something goes wrong, but, you always have all versions of stock sbfs here on XDA.
just follow my tuto, and you should be fine
Click to expand...
Click to collapse
That's why you need a nandroid backup, when SOME THING goes wrong!!!!!!! If you don't know what to do read this it will be so help full http://forum.xda-developers.com/showthread.php?t=1216982
ok so i redid it again i just selected the wrong 2ndinit another question?how can i disable the charging LED light on CM7 >.< cant seem to find it in the settings unlike with the stock ROM that has ability to disable..
jlaloon said:
ok so i redid it again i just selected the wrong 2ndinit another question?how can i disable the charging LED light on CM7 >.< cant seem to find it in the settings unlike with the stock ROM that has ability to disable..
Click to expand...
Click to collapse
well, on CM7 stable you cant disable LED, that option has been added in CM7.2 nightlies, which i m using.
I dont remember if its there in latest nightlies of CM7.
Don't understand why..
I flashed the boot.img included in the zip via fastboot
then i went into recovery and installed FXPCM7
rebooted
Stuck on FreeXperia logo for 30mins.
Whats going on?
After you flash the kernel boot into recovery...
wipe data/factory reset
wipe cache
then go into advanced then wipe dalvik cache
Then flash the CM7.zip
Let me know how it goes - good luck
- wipe data/factory reset
- wipe cache partition
- advance > dalvik cache
install FXPCM7
tried it, still stuck on FreeXperia logo
do i need to be on stock when installing it?
I am currently on the enhanced v2 firmware with doom kernel..
update:
tried stock too, doesnt work..
Hm try this
Redownload CM7
using flash tool flash this FTF - It has the newest baseband and largest user partiton
flash the kernel that came with CM7
Enter recovery and..
> factory reset
> wipe cache partiton
go into advanced and
>clear dalvik cache
Then install the CM7 zip from sd-card let me know how it goes
Thanks, but that was the firmware i was on.
I tried that method twice but the same thing kept happening to me
stuck at FreeXperia logo
Just to check if the problem is specific only to CM7 rom itself try installing another rom like Gin2Jellybean - Good luck
I have used various ROMS (all working perfectly) such as:
Gin2ICS/JellyBean
xDarkICS 4.0.3
Xperia NXT
JokaWild
Advanced Stock
So I think it may be just a problem with CM7?
Oh that's strange, try to download it again or try another build from here
tried the stable build now.. same problem :/
EDIT:
Tried flashing doom kernal, this time it actually boots.. touch screen doesnt work but it boots..
Is there another kernal i can use that works?
help please? would love to get cm7
Gamepad doesn't work on CM7. Flashing the ICS fixes kinda works
Sent from my R800i using xda premium
CTU_Loscombe said:
Gamepad doesn't work on CM7. Flashing the ICS fixes kinda works
Sent from my R800i using xda premium
Click to expand...
Click to collapse
lol?
Sent from my Xperia Play
AudioCreaper said:
lol?
Sent from my Xperia Play
Click to expand...
Click to collapse
Why lol?
I couldn't get the pad to work so I flashed the ICS Circle fix and the CM9 gamepad one and it worked. For emulators anyway
If theres a proper fix please let me know
Sent from my R800i using xda premium
I finally figured out how to do it. Go in CWM and delete user data, dalvik cache, cache, and then go to the Mounts and Storage menu, and Format the System Partition. Make sure not to clear the SD partition on accident. Anyways, this is the only way I could get it to work
Sent from my R800x using xda app-developers app
Phascinate said:
I finally figured out how to do it. Go in CWM and delete user data, dalvik cache, cache, and then go to the Mounts and Storage menu, and Format the System Partition. Make sure not to clear the SD partition on accident. Anyways, this is the only way I could get it to work
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
didnt work for me >_<
CTU_Loscombe said:
Why lol?
I couldn't get the pad to work so I flashed the ICS Circle fix and the CM9 gamepad one and it worked. For emulators anyway
If theres a proper fix please let me know
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Isnt the topic of this thread helping the op to get cm7 working on his phone? And you're talking about the circle button.
Sent from my Xperia Play
I installed the stable cm9..flashed the fxp133 kernel..the installation went smooth but my screen touch function is lost..Any ideas??
Eventually restoring to the stock kernel with JJ hybrid..and yeah the touch is working with this one. So is the problem cos of the kernel or the ROM??
I ll tell the sequence which i followed..let me know where i went wrong..i downloaded the ROM, extracted the boot.img, copied the original cm9 zip into the root of SD..used fastboot mode of flashtools to flash the kernel boot.img..then went into CWM..wiped out SD data..then cache..and then dalvik..and then proceeded to install zip from sd..it installed fine..and then i rebooted..it showed d FXP kernel logo and then CM9 bootscreen and then it loaded like it should..BUT the touchscreen isnt working at all..the hardware keys-power and back i checked were working but not the touchscreen..
Where did I go wrong..i am on baseband -72..bootloader unlocked..
You've installed correctly. Possibly a corrupt download, try re-downloading the zip.
sinkster said:
You've installed correctly. Possibly a corrupt download, try re-downloading the zip.
Click to expand...
Click to collapse
I downloaded both official stable CM9 as well as the FXP one on uploaded.to...tried with each of them but with the same result..both cant be corrupt n it wouldnt have extracted if it was a corrupt download anyways..m still wondering whats wrong..
Also I flashed doomkernel and tried installing..again the same..touchscreen still doesnt work..aarghh..
Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium
I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app
Braayhaan said:
Flash the kernel, wipe data, system, cache, dalvik, battery stats and flash cm9.
It should work...
Sent from my Arc S using xda premium
Click to expand...
Click to collapse
iwarind said:
I did all that but the stupid touch screen issue still persists..wait..i didn't clear battery stats..but do u think that actually might create such an issue?
Sent from my LT18i using xda app-developers app
Click to expand...
Click to collapse
Wiping battery stats does nothing to your phone. It doesn't change anything, it doesn't affect anything. It cannot be the problem.
Then what do u think the problem is..infact the installation works fine so i think i m not messing up anything on that front..
Sent from my LT18i using xda app-developers app
Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.
I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?
freakin.ro said:
I would try another Kernel ... do you have an Arc or Arc S ... does someone know if it makes a difference ?
Click to expand...
Click to collapse
I have Arc S..n i did try wid doomkernel as well..same result..
sinkster said:
Probably best to use flashtool to flash stock ics rom and kernel, then cm9 kernel/rom.
Click to expand...
Click to collapse
I had stock ics rom only when i started..n again have gone back to the same now..i tried it a no of times..but the problem persists..
i was trying to flash the PLAY-ICS-Beta-AdvStockKernel-
i done the last step which was click "reboot device into system on the flashtool programme, and from then my phone just reboots, and wont turn on, the boot is different to how it used to be so im guessing the kernal works. pleease help me
You need to flash a ICS rom from CWM.
Have you got a nandroid backup?
Xperia-Play
NXT 1.3 LE
YNWA!
jeff7424 said:
You need to flash a ICS rom from CWM.
Click to expand...
Click to collapse
okay how do i go about doing that?
ILikeTheWayYouMove2 said:
Have you got a nandroid backup?
Xperia-Play
NXT 1.3 LE
YNWA!
Click to expand...
Click to collapse
no i havnt... is that needed?
CurtyB2212 said:
no i havnt... is that needed?
Click to expand...
Click to collapse
Yes that was needed before flashing custom roms and now your stuck. You need to pull out your battery and start learning how to use flashtool.
Okay no need to be rude! And i havnt flashed a rom just the kernel, can it be fixed?
Sent from my GT-S5360 using xda app-developers app
CurtyB2212 said:
Okay no need to be rude! And i havnt flashed a rom just the kernel, can it be fixed?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yeh a nandroid is kinda like a system restore for a pc which is useful if you get bootloops and such and there loads of threads on heere on how to flash custom roms ect and therre not ttoo hard to understand
Xperia-Play
NXT 1.3 LE
YNWA!
But you said i need it before i flash, im askin if the bootloop can be fixed now
Sent from my GT-S5360 using xda app-developers app
CurtyB2212 said:
But you said i need it before i flash, im askin if the bootloop can be fixed now
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
What you need to do is reboot the phone when the boot logo comes on continuously hit the back button... That should get you into recovery. Then install rom from sd.
Sent from my R800x
---------- Post added at 01:07 PM ---------- Previous post was at 01:04 PM ----------
When you flash a kernel it removes everything you had on the phone... Thats why you have to do a backup before... But if you didn't its no big deal unless you had apps that you don't have backed up.
Sent from my R800x
Okay thanks i'll try this tomoro and then let you know how it went,
And i moved everything important i needed to my laptop so i guess the back up isnt that important to me
Sent from my GT-S5360 using xda app-developers app
try changing kernel and flash the rom agian try my fav doomloadsics kernel
CurtyB2212 said:
Okay thanks i'll try this tomoro and then let you know how it went,
And i moved everything important i needed to my laptop so i guess the back up isnt that important to me
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
The backup is important when things go wrong eg bootloops
Xperia-Play
NXT 1.3 LE
YNWA!
Lordomn said:
What you need to do is reboot the phone when the boot logo comes on continuously hit the back button... That should get you into recovery. Then install rom from sd.
Sent from my R800x
---------- Post added at 01:07 PM ---------- Previous post was at 01:04 PM ----------
When you flash a kernel it removes everything you had on the phone... Thats why you have to do a backup before... But if you didn't its no big deal unless you had apps that you don't have backed up.
Sent from my R800x
Click to expand...
Click to collapse
right im finally home to sort all this out, im in recovery mode, but i must have accidently unzipped the rom before puttting it on my sd card, so when i click choose a zip to apply, then click 'xperia play stock ICS 4.0.4, it comes up with 3 options meta-inf , data and system. is it suppose to do this, with any of the option on the first menu can i remove the kernel? like factory restest or anything?
ILikeTheWayYouMove2 said:
The backup is important when things go wrong eg bootloops
Xperia-Play
NXT 1.3 LE
YNWA!
Click to expand...
Click to collapse
ahh i see i see
CurtyB2212 said:
right im finally home to sort all this out, im in recovery mode, but i must have accidently unzipped the rom before puttting it on my sd card, so when i click choose a zip to apply, then click 'xperia play stock ICS 4.0.4, it comes up with 3 options meta-inf , data and system. is it suppose to do this, with any of the option on the first menu can i remove the kernel? like factory restest or anything?
Click to expand...
Click to collapse
You don't have to unzip it. Just throw the whole zip into sd card then flash it with CWM.
jeff7424 said:
You don't have to unzip it. Just throw the whole zip into sd card then flash it with CWM.
Click to expand...
Click to collapse
i know that now... but i already have, so im saying what can i do from the place im at. i can get onto recovery, but can i stop the bootloop from here
CurtyB2212 said:
i know that now... but i already have, so im saying what can i do from the place im at. i can get onto recovery, but can i stop the bootloop from here
Click to expand...
Click to collapse
Get to recovery
Wipe cache, factory reset, dalvik-cache (under advanced tab)
Install zip from sd card
Select the zip
Install
Reboot
jeff7424 said:
Get to recovery
Wipe cache, factory reset, dalvik-cache (under advanced tab)
Install zip from sd card
Select the zip
Install
Reboot
Click to expand...
Click to collapse
ive wiped everthing, but like i said before, when i click install zip, i then click xperia play stock ics 4.0.4. which is the zip, but i may have unzipped it,.
then i get 3 more folders/options 'meta-inf' 'data' and 'system' so can i click on one of these to install the rom? or what? do i have to click on one then reboot then do the other one? what?
You have to rezip the three files then install it in recovery.
Sent from my R800x
Hi guys .. is there any good custom ROM for xperia r800x cdma locked bl? if so can u guys help me out pointing me to right direction? i appreciate any help .. im currently rooted and installed xparts to get cwm .. thnx guys.
Mingal said:
Hi guys .. is there any good custom ROM for xperia r800x cdma locked bl? if so can u guys help me out pointing me to right direction? i appreciate any help .. im currently rooted and installed xparts to get cwm .. thnx guys.
Click to expand...
Click to collapse
There is currently 2 locked booloader roms for the R800x. Which is gbtweaked and cola.
chery2k said:
There is currently 2 locked booloader roms for the R800x. Which is gbtweaked and cola.
Click to expand...
Click to collapse
thnx man i will look for them i appreciate it .. also would u mind telling if the cwm from xparts app all i need to install the rom? can i keep the stock kernel from my 2.3.3?
Use version 5 or below... The newest version doesn't work correctly.
"We are the fire that will consume them, belly and bowel, head and heart, many flames of us, but one fire."
Root GB 2.3.3. Use CWM Installer v5 to install CWM. Flash NXT Lite rom: http://forum.xda-developers.com/showthread.php?t=2067356&highlight=cdma. It work with stock kernel, which is why you don't need to unlock bootloader. But remember its free to unlock it from Sony site. Personally I recommend using Flashtool to update to kernel 2.3.4, when you flash the ftf you can uncheck everything, but the kernel.
eksasol said:
Root GB 2.3.3. Use CWM Installer v5 to install CWM. Flash NXT Lite rom: http://forum.xda-developers.com/showthread.php?t=2067356&highlight=cdma. It work with stock kernel, which is why you don't need to unlock bootloader. But remember its free to unlock it from Sony site. Personally I recommend using Flashtool to update to kernel 2.3.4, when you flash the ftf you can uncheck everything, but the kernel.
Click to expand...
Click to collapse
Hey thnx for all the help guys i will try them out see wich one i like ... if i get everything working fine i will post it here .. if u guys need any help wit anything pm me ..
Hey guys I stumble on. Installin nxt rom I get a error saying md5 Mismatch u guys know nthing bout this? Thnx
Sent from my R800x using xda app-developers app
It mean the checksum didn't match up which mean the rom file is corrupt. Do a disk check on your sdcard.
Sent from XDA app
---------- Post added at 10:28 AM ---------- Previous post was at 10:24 AM ----------
Also make sure if you are downloading a flashable rom or a Nandroid backup. If it's a nandroid you have to put it in /sdcard/clockworkmod/backup and Restore it.
Sent from XDA app
Mingal said:
Hey guys I stumble on. Installin nxt rom I get a error saying md5 Mismatch u guys know nthing bout this? Thnx
Sent from my R800x using xda app-developers app
Click to expand...
Click to collapse
If you changed or removed a system file on your stock rom, whether it was a browser or one of the gapps, you'll get an md5 mismatch. This has happened to me on one of my tablets, I flashed a stock factory rom to put everything back into order, then flashed the custom rom after, and all was well.
Thnx guys I will try the scan disk on card see if it work when I get home ... N I never removed anything from previous stock rom so I dnt know ... also so a terminal emulator fix but dnt know how to do it I'll keep u guys posted
thnx
Sent from my R800x using xda app-developers app
Follow the instruction from the rom thread, it's a nandroid, you have to restore it, not flash.
Sent from XDA app
Alright so after trying all kinds of stuff I found a fix for md5 Miss match .. I simply just took all the spaces of the folder name .. example: rom super 1 I just renamed romsuper1. OK so I followed the rom tutorial and all went good but after I rebooted it started with Sony Ericson logo then a Expedia logo the went back to Sony logo then Expedia logo n so so it wouldn't boot ... so i did the same process again ass tutorial but this time didn't clean dalvik cache like tutor said too before reboot. And it started fine .. my question is .. is my from now messed up maybe cuz I sent clean dalvik? Should I do all over again? I appreciate all patience and help
Sent from my R800x using xda app-developers app
So did you restore the nandroid backup and booted into the new NXt rom successfully? Then you should just do a factory reset.
Before you flash a rom or restore you should always do a factory reset or the phone might not boot, in CWM this is equivalent to choosing "wipe data/cache", this will encompass the wiping of dalvik cache which is contained within /data partition. Doing this will clean off personal data.
Sometimes you have to "wipe /system partition" as well, this is equivalent to wiping C:/Windows, as in the entire OS is gone. Then you have to restore a nandroid or flash the rom otherwise the phone has no OS to boot into.
You can choose to wipe only cache and dalvik cache, these are just temporarily files. I do it before making a nandroid backup.
Sent from XDA app
Yes I got it to work successfully.. but I did not do a factory reset after.. wouldn't that wipe the from I just recovered? Thnxs for all ur help man.
Sent from my R800x using xda app-developers app