Wifi Error - Samsung Galaxy Gio GT-S5660

Please help me about my gio i updated it yesterday but bluetooth and wifi status is error. 2.3.4

What kind of error? Can you be a bit more specific??
Sent from my GT-S5660 using xda premium

I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable

johnarela said:
I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable
Click to expand...
Click to collapse
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium

I already do it but nothing happen it always says driver unsuccessful when i press *#*#526#*#*

voetbalremco said:
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
ROFL, he doesn't need to install CWM Recovery just to wipe all. He has stock recovery where he can do wipe data and cache or just put a code in the dialer.
Just shut off the phone and turn it on by pressing Home button + Power and you will get into stock recovery, then wipe data and cache.

i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens

johnarela said:
i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens
Click to expand...
Click to collapse
Try flashing another firmware
Sent from my GT-S5660 using xda premium

a new firmware would fix it why would u like 2.3.4 when the latest is 2.3.6, try to flash DXKT4 and then make a factory reset hope this helps

I would suggest, you give a shot to the new CyanogenMod 7.2
Follow this link: http://forum.xda-developers.com/showthread.php?t=1381355
I tell you, it is much more reliable than you might think. Moreover, because of the custom kernel, you can select some pre-installed CPU governor, so that your GIO become even a bit faster.
Good Luck

Hi,
First, i would like to know, you are upgrading from what firmware to what firmware? is it one package firmware or full package?
I would suggest you to flash it again, but this time, using the full package firmware. After that, don't forget to wipe data/cache, and then factory reset, all via recovery mode.
My exp about upgrading:
- from S5660DXKC3 (froyo, one package) to S5660DXKP6 (gingerbread, one package)
- unstable, lagging, wasteful of battery (bottom line is, disappointed)

Note that xkp6 2.3.6 on xda thread has been modified, on sammobile its a clean rom
Sent from my GT-S5660 using xda premium

most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...

0M3G4_ said:
most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...
Click to expand...
Click to collapse
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??

0M3G4_ said:
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??
Click to expand...
Click to collapse
Remove the .md5 , extract the .tar
And flash the amss file .
Sent from my GT-S5660 using xda premium

WIFI+BT+Acceloremeter
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.

sohaib.ahln said:
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.
Click to expand...
Click to collapse
Let me guess. You have an SHW-500 or something?!
Sent from my GT-S5660 using xda app-developers app

When flashing with ODIN:
Make sure you flash the right firmware! If you flashed any firmware, it also flashes their model's and Country's: modem, csc, kernel, system, etc...
Thus resulting wifi, data, bluetooth, and connectivity errors.
Find the right Stock ROM for your Gio model here. Then use ODIN to flash it.

Related

[Q] Evo 4G Won't Connect to Home Wifi

I just flashed the Shooter rom from Team-Nocturnal last night, and I love it. It's nice and smooth, and just fits me. However, there is one problem, I cannot connect to myy wifi. Before I was on this rom I could connect to myy wifi, no problem. But noww, when I tryy to connect it says it's obtaining the ip address, then diconnects and tries again. I am a n00b, so I don't kjonww what info is needed to resolve this question, so I'll just post what I think might be relevant. If youu need more info, I'll be sure to put it up! . Thanx for your time! .
Android Version- 2.3.4
HTC Sense Version- 3.0
Software number- 4.54.651.1
Kernal Version:
2.6.35.10-g4b48446
[email protected] # 1
Baseband Version.2.15.00.8080
I have no experience with this particular rom, but I would wipe everything except SD card a couple times and try a fresh flash to see if the problem persists.
Sent from my PC36100 using xda premium
THREESTRIPEBRAND said:
I have no experience with this particular rom, but I would wipe everything except SD card a couple times and try a fresh flash to see if the problem persists.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
So, should I wipe it with RomManager? or something else? .
KingJayJay1996 said:
So, should I wipe it with RomManager? or something else? .
Click to expand...
Click to collapse
I use this recovery, never had issues. I use 3.07 just rename the zip PC36IMG.zip and put it on the root of your SD card. Then power down and reboot while holding the power and volume down until you reach the boot loader. It will ask you if you would like to upgrade hit volume up for yes then again to reboot. Once booted up boot back into recovery and wipe everything twice except SD card. Then flash the rom again and see if the problem persists.
http://forum.xda-developers.com/showthread.php?t=1339654
Sent from my PC36100 using xda premium
You need to reflash radios send me a pm and I'll send you a link to the newest ones.
Sent from my A500 using xda premium

Problems after flashing ROM!!!

I have a rooted Spice Mi-310 with Android 2.2 and I had market compaitibliy problems and for that I have done everything like changing build.prop, trying some apps like modder pro and etc.
All were failed then I talked to my friend about this and he said that you should upgrade your OS. So I thought downloading custom ROMs from ROM Manager from ClockworkMod will help and there I tried to backup my cuerrent ROM but my ROM was not in the list so I tried backing up or flashing up Google Nexus S ROM because I thought that I have changed my build.prop to Nexus S so this will work and it worked too.
And now my Camera is not working it is showing that "Cannot Connect to Camera" and now the battery is also not working properly.
Then I wanted to reset my Factory and now that also not working.....
Please help me. Helpers will be GREATLY APPRICIATED BY THE BOTTOM OF MY HEART.
if you can enter in clockwork mod then you can wipe data and cache...its problem with the rom that it doesnt support your hardware.....
you can get the stock rom service from spice website i think
Will it work after Uninstaling?
shyamjptpm said:
if you can enter in clockwork mod then you can wipe data and cache...its problem with the rom that it doesnt support your hardware.....
you can get the stock rom service from spice website i think
Click to expand...
Click to collapse
Thanks but will it work after uninstalling the ROM Manager because I thought uninstalling ROM Manager will make my mobile good.
Yes it will work.....
Sent from my GT-I9100G using XDA
Sorry one more problem
shyamjptpm said:
Yes it will work.....
Sent from my GT-I9100G using XDA
Click to expand...
Click to collapse
Sorry but there is one more problem:
I have one more problem that I have cleared download cache of ROM manage.....
But should I clear cache from setting>applications?
and i also found that there is nothing like wipe data option in ROM Manager but I found it on Titanium Backup so should I Wipe Data from it?
You can use these links to learn your phone and solve
http://forum.xda-developers.com/showthread.php?t=1160213
Sent from my GT-I9100G using XDA
http://forum.xda-developers.com/showthread.php?t=1407222
Go through these steps and r reply me the progress....don't worry first time its all happens...
Sent from my GT-I9100G using XDA

restore to stock without usb

I am having issues with my USB connection. Is it possible to restore to factory settings without connecting to a computer? Wifi on the device works well for downloading roms and I have a micro SD adapter and micro SD that I could use to mount on my PC.
Mobile Odin. Works awesome, check to see if its compatible with the sgs2
Edit: just checked. Its compatible
davwman said:
Mobile Odin. Works awesome, check to see if its compatible with the sgs2
Edit: just checked. Its compatible
Click to expand...
Click to collapse
R u sure? I'm not seeing the SGH T989. The only tmo phone I see is the SGH T999. I'm almost sure the T989 is not compatible.
Sent from JMT Goodness
Odin does not work. Any other ideas? If someone makes a nandroid could I flash that?
Just type *#2767*3855# into your phone pad and it should set it back to factory for you.
richardlibeau said:
Just type *#2767*3855# into your phone pad and it should set it back to factory for you.
Click to expand...
Click to collapse
I am running cyanogenmod v9 and entering this into the dialer did nothing, even after pressing the call button.
Might need to flash the UVLH1 radio 1st before flashing the stock recovery.
1. install/flash stock ROM 1st.
2. Once installation completed Reboot to custom recovery.
3. install/flash stock recovery.zip.
4. Power off to verified stock recovery.
SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip
http://d-h.st/MAT
SGH-T989_UVLH1_Stock_Recovery.zip
http://d-h.st/UwL
I found the above links in a different thread, it's not my work, I forgot whose work it is but that should work. You have to flash the uvlh1 radio too. You should also flash the reset for the flash counter. The link to the thread is below.
Edit: The links above are provided by KRZ-2pa. Please thank him.
http://forum.xda-developers.com/showthread.php?t=1578184
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
@doctor_leek, were you able to fix your issue? It might be a bad USB cable or is the USB port on your device that is broken?
Sent from my SGH-T989 w/CM10-Hybrid ParanoidAndroid v2.11(9-13-12)by: jay.dub using XDA app.
Unfortunately I have not been able to resolve the USB issue and am sending in the phone. I realized only after performing the factory reset that this would not delete all of my personal data, including apps, so things like Rom Manager are still in place. All I want to do is completely wipe the device. As far as I know it is impossible to do this without root, and rooting requires functioning USB. Is there any way for me to remove these files or root without USB?
doctor_leek said:
Unfortunately I have not been able to resolve the USB issue and am sending in the phone. I realized only after performing the factory reset that this would not delete all of my personal data, including apps, so things like Rom Manager are still in place. All I want to do is completely wipe the device. As far as I know it is impossible to do this without root, and rooting requires functioning USB. Is there any way for me to remove these files or root without USB?
Click to expand...
Click to collapse
In a earlier post you said you are running CM9. If that is true, you are already rooted. FYI... ROM Manager is baked into the CM ROMS, so factory resetting it will not erase ROM Manager, but will restore the phone to a "wiped" CM9 base.
What recovery are you running, CWM, TWRP, etc...? In either event, you can flash TDJ's Darkside Superwipe and all of your personal data will be wiped.
I am no longer rooted and am back to the stock recovery. Is it still possible to superwipe?
edit: nope, I get a "signature verification failed" error.
for clarification, I flashed SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip and SGH-T989_UVLH1_Stock_Recovery.zip from CloudTown3's post, and since then have performed a factory reset on the device. I still have ROM Manager and presumably traces of other apps I would like to remove before sending in the device.
doctor_leek said:
I am no longer rooted and am back to the stock recovery. Is it still possible to superwipe?
edit: nope, I get a "signature verification failed" error.
for clarification, I flashed SGH-T989_UVLH1_Stock_Odex_zipaligned_signed.zip and SGH-T989_UVLH1_Stock_Recovery.zip from CloudTown3's post, and since then have performed a factory reset on the device. I still have ROM Manager and presumably traces of other apps I would like to remove before sending in the device.
Click to expand...
Click to collapse
Did you wipe before flashing the stock zip? Weird, maybe ask KRZ-2pa if he left ROM manager in the stock ROM he made? I flashed another stock ROM on my phone when I had to send it back in and it worked fine, I had zero traces of my custom ROM. Did you make sure you flashed the reset counter zip too?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Doesn't sound like he wiped. But if he can't get rid of those apps then they are system apps that were included with the Rom which doesn't sound right because why have Rom manager without superuser
Sent from my SGH-T989 using xda app-developers app
Teo032 said:
Doesn't sound like he wiped. But if he can't get rid of those apps then they are system apps that were included with the Rom which doesn't sound right because why have Rom manager without superuser
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I don't remember my exact steps, but it's possible I forgot to wipe. I did run the flash counter reset, though.
Now I'm stuck. I am sending the phone in, and everything is back to stock but still have Rom manager on the device. Is there anything I could try to root the phone again without a working usb connection?
Thx the posted links worked great!
Sent from my SGH-T989 using xda premium
genaire said:
Thx the posted links worked great!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
do you mean the rom + recovery zips posted by CloudTown3? After flashing these, do you have Rom Manager installed?
edit: Is there any way to flash a root zip with the stock recovery?
I am close to giving up and sending in the phone. I am unable to root the device or remove Rom Manager by another method. If anyone can assist me in completely restoring the phone to stock without a functioning USB port, that would be much appreciated.
My t989:
Broken usb port
Not rooted
Android 4.0.4
Baseband: T989UVLH1
Kernel: 3.0.8
Build: IMM76D.UVLH1
Recovery: Stock
doctor_leek said:
I am close to giving up and sending in the phone. I am unable to root the device or remove Rom Manager by another method. If anyone can assist me in completely restoring the phone to stock without a functioning USB port, that would be much appreciated.
My t989:
Broken usb port
Not rooted
Android 4.0.4
Baseband: T989UVLH1
Kernel: 3.0.8
Build: IMM76D.UVLH1
Recovery: Stock
Click to expand...
Click to collapse
I flashed those zips earlier today again to see if they were fine and they worked perfectly for me. I'm not sure where it went wrong for you. Hopefully you figure it out somehow dude. maybe go into the stock recovery and factory reset and wipe caches?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
CloudTown3 said:
I flashed those zips earlier today again to see if they were fine and they worked perfectly for me. I'm not sure where it went wrong for you. Hopefully you figure it out somehow dude. maybe go into the stock recovery and factory reset and wipe caches?
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
You are able to flash these zips from stock recovery? I get file verification errors. I tried factory reset and wipe caches from stock recovery.
I don't fully understand how it works with Rom Manager staying as a default app after I performed a factory reset. I guess I should have removed it manually while still rooted. It is located in "system/app/RomManager.apk". For some reason this file survives a factory reset. If there were any way to remove that file, I think that's all that is necessary. It makes me wonder if there are other things i'm not noticing that should also be removed.

[Q] Wifi brick while flashing Custom ROM

The wifi brick problem happened after installing the following rom
[ROM][MIUI][4.1.2][OTA] MiuTu v2.0 [Multilang/Smooth++/Battery]
while going through the setup for the first time the wifi signal came after i tried to connect to the network then the signal was gone
i thought that this may be the problem with the rom then
i tried other roms (ICS and JB) and kernels although the problem is still there
so please help me to fix this problem
kunal.kdmw said:
The wifi brick problem happened after installing the following rom
[ROM][MIUI][4.1.2][OTA] MiuTu v2.0 [Multilang/Smooth++/Battery]
while going through the setup for the first time the wifi signal came after i tried to connect to the network then the signal was gone
i thought that this may be the problem with the rom then
i tried other roms (ICS and JB) and kernels although the problem is still there
so please help me to fix this problem
Click to expand...
Click to collapse
have you done Pristine wipe?
Sent from my GT-S6500 using xda app-developers app
TiTAN-O-One said:
have you done Pristine wipe?
Sent from my GT-S6500 using xda app-developers app
Click to expand...
Click to collapse
I have done data wipe, cache partition wipe and dalvik cache wipe only and there is no any pristine wipe.
now i am trying to go back to the manufacturer OS by flashing the Stock rom through odin but it Stucks at the screen of Setup connection
so please help me out
Pristine is not an option in CWM Recovery but a way on how to get your system clean for a clean installation.
Pepoluan made a guide on how to do thiy you can read here: http://forum.xda-developers.com/showthread.php?t=2044861&highlight=pristine
About sitcking while flashing with Odin you maybe are doing something wrong. For example forgetting to put a check at a field or there is something wrong with your hardware. Try an other USB port and make sure it´s a native one but not a hub.
Thanks
honeyx said:
Pristine is not an option in CWM Recovery but a way on how to get your system clean for a clean installation.
Pepoluan made a guide on how to do thiy you can read here: http://forum.xda-developers.com/showthread.php?t=2044861&highlight=pristine
About sitcking while flashing with Odin you maybe are doing something wrong. For example forgetting to put a check at a field or there is something wrong with your hardware. Try an other USB port and make sure it´s a native one but not a hub.
Click to expand...
Click to collapse
Thanks for your support and help but i found another way to fix my device
i downloaded the ancora file and the firmware and flashed it with odin multi downloader and the flashing worked
once again thanks for your help:laugh::good:

[Q] Cyanogenmod 11 on Samsung Galaxy Grand duos

I own a Samsung Galaxy Grand duos GT - I9082, running on CM 11, PHILZ 6.0.4.5 Recovery, My concern is now I am not able to go to stock, I have tried flashing JB 4.1.2 tar.md5 file thru odin 3.07, every thing works fine, pass msg comes on the screen, but after that it re-boots to same CM 11, I have also tried doing factory reset, cache & dalvik cache wipe after the flashing, but it never comes back to stock. I am even trying to flash the selinux support recovery, but the same thing happens, after odin pass msg, if i check the recovery its the same PHILZ 6.0.4.5 Recovery. I am really worried that has my phone been bricked, pls help asap, thank you.
nandaleo72 said:
I own a Samsung Galaxy Grand duos GT - I9082, running on CM 11, PHILZ 6.0.4.5 Recovery, My concern is now I am not able to go to stock, I have tried flashing JB 4.1.2 tar.md5 file thru odin 3.07, every thing works fine, pass msg comes on the screen, but after that it re-boots to same CM 11, I have also tried doing factory reset, cache & dalvik cache wipe after the flashing, but it never comes back to stock. I am even trying to flash the selinux support recovery, but the same thing happens, after odin pass msg, if i check the recovery its the same PHILZ 6.0.4.5 Recovery. I am really worried that has my phone been bricked, pls help asap, thank you.
Click to expand...
Click to collapse
It may not be a brick, try with a different stock firmware file. This should not happen if everything is working fine, i just said that as a suggestion, it wont be the proper solution for your problem, just try it. Also try to wipe all data etc, which you had done already.
Try the process provided in my signature link.
Flash gennxt ROM first and then flash the firmware
I successfully restored my phone to 4.1.2 using this method.
Sent from my GT-I9082 using Tapatalk
Try flashing with odin 3.04 i had similar issues while rooting my friends grand using odin 3.07 but it worked only with 3.04 ...give it a try..
Sent from my GT-I9082 using xda app-developers app
Thanks
hey i was wondering is there anyway to reduce the icon sizes or do i have to use 3rd launcher apps for that ??Andi cant seem to find way to move images to other folders in gallery! Is there anyway??? Thanks
arju88nair said:
hey i was wondering is there anyway to reduce the icon sizes or do i have to use 3rd launcher apps for that ??Andi cant seem to find way to move images to other folders in gallery! Is there anyway??? Thanks
Click to expand...
Click to collapse
Download a app called build prop editor from play store and open it...u need root access to work with this app...search LCD density and set it to 240 save and reboot...
Sent from my GT-I9082 using XDA Premium 4 mobile app
arju88nair said:
hey i was wondering is there anyway to reduce the icon sizes or do i have to use 3rd launcher apps for that ??Andi cant seem to find way to move images to other folders in gallery! Is there anyway??? Thanks
Click to expand...
Click to collapse
If you are wondering to reduce your icon sizes you should probably use 3rd party launcher apps.(only on stock roms)
If you are using CM ROM,
Then try searching tx droider dPI app in google.
Set the DPI to 190 or 189 that will work.
Press thanks if helps.

Categories

Resources