Develop Bugs

Wifi Error

Please help me about my gio i updated it yesterday but bluetooth and wifi status is error. 2.3.4

What kind of error? Can you be a bit more specific??
Sent from my GT-S5660 using xda premium

I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable

johnarela said:
I update my gio to gingerbread 2.3.4 using odin, after that i try using wifi and bluetooth it always says error. i check my status of my phone WIFI MAC address unavailable bluetooth address also unavailable
Click to expand...
Click to collapse
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium

I already do it but nothing happen it always says driver unsuccessful when i press *#*#526#*#*

voetbalremco said:
Do you have Clockworkmod installed? Then make a backup and wipe data and caches, see if ir fixes.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
ROFL, he doesn't need to install CWM Recovery just to wipe all. He has stock recovery where he can do wipe data and cache or just put a code in the dialer.
Just shut off the phone and turn it on by pressing Home button + Power and you will get into stock recovery, then wipe data and cache.

i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens

johnarela said:
i tried many ways like pressing the code in the dial pad, rebooting, wiping cache/data, reflashing but nothing happens
Click to expand...
Click to collapse
Try flashing another firmware
Sent from my GT-S5660 using xda premium

a new firmware would fix it why would u like 2.3.4 when the latest is 2.3.6, try to flash DXKT4 and then make a factory reset hope this helps

I would suggest, you give a shot to the new CyanogenMod 7.2
Follow this link: http://forum.xda-developers.com/showthread.php?t=1381355
I tell you, it is much more reliable than you might think. Moreover, because of the custom kernel, you can select some pre-installed CPU governor, so that your GIO become even a bit faster.
Good Luck

Hi,
First, i would like to know, you are upgrading from what firmware to what firmware? is it one package firmware or full package?
I would suggest you to flash it again, but this time, using the full package firmware. After that, don't forget to wipe data/cache, and then factory reset, all via recovery mode.
My exp about upgrading:
- from S5660DXKC3 (froyo, one package) to S5660DXKP6 (gingerbread, one package)
- unstable, lagging, wasteful of battery (bottom line is, disappointed)

Note that xkp6 2.3.6 on xda thread has been modified, on sammobile its a clean rom
Sent from my GT-S5660 using xda premium

most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...

0M3G4_ said:
most stable wifi rom for me is this one :
SamsungGalaxyGIO_S5660_XXKQG_2.3.4 (search for it on sammfirmware...)
i am now trying to know how to port its baseband to a flashable baseband to put in wichever rom i want, but i have no idea where to start...
Click to expand...
Click to collapse
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??

0M3G4_ said:
So, does anyone know how to extract the baseband from this rom in order to use it with any other rom i'd like...??
Click to expand...
Click to collapse
Remove the .md5 , extract the .tar
And flash the amss file .
Sent from my GT-S5660 using xda premium

WIFI+BT+Acceloremeter
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.

sohaib.ahln said:
Dear Friends,
I bought an "olleh" galaxy gio and updated it to 2.3.6 from Odin.
Now the"Olleh" logo do not show and in its place samsung generic logo show on startup.
Main problem is, since update, my "auto-rotate" option rotates screen in opposite directions and when switching on wifi or BT, it just shows "Error".
No detail of error is shown.
Except that everything is fine. Calling, texting and gaming...
I used the following ROM to update:
S5660XXKTF_S5660DBTKT1_S5660XXKT4_HOME.tar.md5
Please help me with WIFI as I need it very much and could save me alot.
Click to expand...
Click to collapse
Let me guess. You have an SHW-500 or something?!
Sent from my GT-S5660 using xda app-developers app

When flashing with ODIN:
Make sure you flash the right firmware! If you flashed any firmware, it also flashes their model's and Country's: modem, csc, kernel, system, etc...
Thus resulting wifi, data, bluetooth, and connectivity errors.
Find the right Stock ROM for your Gio model here. Then use ODIN to flash it.

HELP ME!!!!!

ok guys im very frustrated. this is my 3rd s4 and i just want to know what im doing wrong, im on a tmobile phone. so when i get my s4 i immediately root it via twrp method, then i go and find i good stock rom to flash, my favorite is wicked rom, i get the rom, putt it on the external sd card, flash the rom and flash ktoonsez kernel, it reboots and the rom works fine no problems, until i try and reboot, then it just hangs on the samsung galaxy s4 boot screen, and it then starts to bootloop without ever going back on, ive tried flashing multiple stock roms and even leaving the kernel stock and tried different kernels without any luck, i can odin back to stock and it works fine, also i can flash any aosp rom and i dont have any reboot issues, this has happened with every phone, im at a loss and i have no idea what im doing wrong, clearly something, i need help. please help guys

Did you do the wipes, including factory reset?

Yes I do all the wipes
Sent from my SGH-M919 using xda premium

Did you install the touchwiz kernel and NOT the aosp kernel?
Sent from my SGH-M919 using xda app-developers app

Yes lol, I'm not that daft
Sent from my SGH-M919 using xda premium

Just some quick questions. What model is your phone? Which TWRP did you flash? Did you check the md5 checksum of the rom and kernel zips?
Sent from my SGH-M919 using xda app-developers app

Model SGH-M919, I've tried twrp 2.5 and 2.6, mostly use 2.5 because I have issues with 2.6 and yes I've checked them multiple times, re-download them both multiple times as well

Use cwm, both versions of twrp are bugged or something is wrong with it. Cwm will do the trick for you
Sent from my SGH-M919 using xda app-developers app

Use Chainfire root, so easy.
Sent from my SGH-M919 using Tapatalk 2

I encountered the same problem, go to KTweaker if you are still using ktoonsez kernel. And change your settings to this.
Make sure you set it to on Boot as Immediately & save the settings. Same thing happened to me, I put in his settings and problem vanished.
After you do that, turn it off and go to recovery. Wipe Dalvik Cache & Cache than finally Fix Permissions in Advanced.

aznvi3tric3guy said:
Use cwm, both versions of twrp are bugged or something is wrong with it. Cwm will do the trick for you
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
didnt work

TehZam said:
I encountered the same problem, go to KTweaker if you are still using ktoonsez kernel. And change your settings to this.
Make sure you set it to on Boot as Immediately & save the settings. Same thing happened to me, I put in his settings and problem vanished.
After you do that, turn it off and go to recovery. Wipe Dalvik Cache & Cache than finally Fix Permissions in Advanced.
Click to expand...
Click to collapse
+1 you're having an issue with the kernel you're using.

Are you using exFAT 64gb sd card? If you are, take it out and your phone will boot fine.
Sent from My S4 in BEASTMODE

Ok. Because you formatted the internal storage with TWRP your partitions are probably messed up. Odin back to stock (like you need to return it) and start over again. You can use TWRP if you want, its a great recovery. Just dont format the internal storage with it. Obviously try the easier fixes first, ie SD card. These phones seem to be more sensitive to formatting than previous galaxy models.

aznvi3tric3guy said:
Use cwm, both versions of twrp are bugged or something is wrong with it. Cwm will do the trick for you
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
TWRP isn't bugged. I have been using it since my s2 and had no issues whatsoever
~~~~~~~~~~~~~~~~~~~~~
I am always on the mobile app and am always 'trying' to help others and moderators on the forum and learning something new everyday. I make stupid posts sometimes, but I never repeat a mistake more than once. I may not be a developer, but I know alot of stuff, so feel free to messsge me any questions and I'll be happy to answer them to the best of my ability.
~~~~~~~~~~~~~~~~~~~~~
I'm starting a video game company with my friend where we will be making Android games. message me for more info or go here: http://forum.xda-developers.com/showthread.php?t=2290843

CodenameRondo said:
didnt work
Click to expand...
Click to collapse
Ive been thru this issue also Trust me Restore stock once more and use oudhs cwm base recovery with swipe gestures. .. skip the twrp junk.
You need to root in a specific manor to bypass the Selinux permissive setting that samsung put on the s4.
I root with odin and flash these files in order after u google search them there also in the s4 root section ..I forget which page.
First @ foremost
FLASH RECOVERY I RECOMEND OUDHS 1.0.3.3 swipe gesture By shabby penguin.
Reboot device into recovery
Flash in order
1# root m919 UVUAMDL.zip
2nd #flash MDB SetUIDoff.zip that bypasses the kernel issue that samsung has blocked ..
3# flash superuser.zip of your choice
#4 wipe cash
5#reboot
You can now flash any Rom, restore etc.... no issues.
Sent from my SGH-M919 using xda app-developers app

I'm having issues no matter what kernel or rom I flash, I'm pretty sure it's a bit more complicated than that
Sent from my SGH-M919 using xda premium

No its not actually. ... if you would odin back stock and root the way I said with files i mentioned you would see.. if you dont want to then thats fine too.
You dont even need odin stock
Just format system in twrp
Then reflash the files.
Sent from my SGH-M919 using xda app-developers app

lojak29 said:
Ive been thru this issue also Trust me Restore stock once more and use oudhs cwm base recovery with swipe gestures. .. skip the twrp junk.
You need to root in a specific manor to bypass the Selinux permissive setting that samsung put on the s4.
I root with odin and flash these files in order after u google search them there also in the s4 root section ..I forget which page.
First @ foremost
FLASH RECOVERY I RECOMEND OUDHS 1.0.3.3 swipe gesture By shabby penguin.
Reboot device into recovery
Flash in order
1# root m919 UVUAMDL.zip
2nd #flash MDB SetUIDoff.zip that bypasses the kernel issue that samsung has blocked ..
3# flash superuser.zip of your choice
#4 wipe cash
5#reboot
You can now flash any Rom, restore etc.... no issues.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
phone doesnt boot now, and i did everything in order

CodenameRondo said:
phone doesnt boot now, and i did everything in order
Click to expand...
Click to collapse
Does Odin recognize it?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

[Q] My phone freezes and restarts when starting up a CM ROM

I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.

tpag02 said:
I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
Click to expand...
Click to collapse
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?

Almite said:
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Click to expand...
Click to collapse
yes, i have. I also got back to stock, used an older recover, flashed with an older version of CM and nothing. I first was using CWM 6.0.3.7., after that I used 6.0.4.3, then an older version of TWRP but nothing. I also tried booting to system without flashing gapps.
With stock ROM everything works just fine.

Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app

iamdofus said:
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Well, thank you, but it didn´t work.

it happened to me the same thing months ago. never had solution. still in waiting. attempt internal and external SD format. and followed the same. I hope someday they can come up with the solution! : (

i have the same problem too

I try to install multiple ROM 4.2.2 and I could only install one version AOKP Milstone JB1. I also worked the other. however all 4.1.2 rom if I worked. I could not install any 4.3 and 4.4 now does not know what is the problem but I've tried everything! anyone found the solution yet but I see I'm not the only one! (excuse my bad English, not my language )

Well you all are right, I am also using shadow mastery (stock rooted rom). Just because I had the same problem sometimes stucking and rebooting and sometimes after going in gallery. Even I can't use 4.3 and 4.4 roms. Anyone have to contact with room developer or someone who know about this problem.
Sent from my SGH-T989 using xda premium

You might want to find an Official T-Mobile or Telus 4.1.2 or 4.0.3/4.0.4 rom that is Odin flashable, not one that has been custom made/flashable from recovery - then just start over after getting back to true stock, change to TWRP or CWM recovery that is 4.3+ compatiable, root and then flash rom/gapps etc.

[Q] SGH-i747m bootloop & TWRP flashing issues

So iv rooted, and using goo manager (can't use Odin because I don't have PC and this was easier) I flashed the latest version of twrp. I first did a nandroid backup and then tried to flash PAC ROM 4.4.2 nightly and cm11 neither worked (I have tried others since then) each time it says "no md5 file found". Its not the end of the world if I have to use the stock ROM for a while till I sort this out.. But when I flashed my nandroid backup I got stuck in a bootloop now I don't know what to do. I can get to twrp still and download mode if nessessary
Please help im a bit of a noob but I'm not stupid and have flashed ROMs on 3 devices successfully. Thanks in advance! I would be greatful for a fix to either of these problems.

drewstopher said:
So iv rooted, and using goo manager (can't use Odin because I don't have PC and this was easier) I flashed the latest version of twrp. I first did a nandroid backup and then tried to flash PAC ROM 4.4.2 nightly and cm11 neither worked (I have tried others since then) each time it says "no md5 file found". Its not the end of the world if I have to use the stock ROM for a while till I sort this out.. But when I flashed my nandroid backup I got stuck in a bootloop now I don't know what to do. I can get to twrp still and download mode if nessessary
Please help im a bit of a noob but I'm not stupid and have flashed ROMs on 3 devices successfully. Thanks in advance! I would be greatful for a fix to either of these problems.
Click to expand...
Click to collapse
If you're using a Linux machine there is a program called heimdall (if I recall correctly) that is supposed to be similar to Odin. I have no personal experience with it so I suggest Google and the search function here.
There is an option in twrp to check for md5 make sure you're not having it Check for it or it will fail, I ran into the same issue after I started playing on my s3 never had that issue on other devices but I do on this one. You can also try using cwm.
For the boot loop try a factory reset a lot of times it will fix it. Also keep in mind that 4.3 roms take a long time to boot the first time after flashing. Check in the development section enewman17 has a stock 4.3 restore it will put the phone back like it would have been immediately after the 4.3 OTA (except warranty bit in download mode will still show a count and be in red letters) even down to stock Samsung 3e recovery.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

You're using the Canadian version of the s3 which is the i747M? Which ROM version were you running before installing TWRP?

audit13 said:
You're using the Canadian version of the s3 which is the i747M? Which ROM version were you running before installing TWRP?
Click to expand...
Click to collapse
theramsey3 said:
If you're using a Linux machine there is a program called heimdall (if I recall correctly) that is supposed to be similar to Odin. I have no personal experience with it so I suggest Google and the search function here.
There is an option in twrp to check for md5 make sure you're not having it Check for it or it will fail, I ran into the same issue after I started playing on my s3 never had that issue on other devices but I do on this one. You can also try using cwm.
For the boot loop try a factory reset a lot of times it will fix it. Also keep in mind that 4.3 roms take a long time to boot the first time after flashing. Check in the development section enewman17 has a stock 4.3 restore it will put the phone back like it would have been immediately after the 4.3 OTA (except warranty bit in download mode will still show a count and be in red letters) even down to stock Samsung 3e recovery.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I was on stock ROM on the rogers-canadian variant which should be the same as the at&t variant I think anyway I cant find the checkbox for "check md5" in twrp do u know where to look? Also can I flash cwm.zip through twrp?(if twrp will allow me) or will this cause more problems. I think there must be a way to fix my problems but I'm pas the extent of my knpwledge . also I think there must be an issue with the stock backup that is causing the bootloop don't know how to fix it. Not working still after multiple factory resets and advanced wipes
Thanks guys I really need help with this

Since you have the i747m (Canadian version), I think it would be best to start from scratch.
Were you running a stock 4.3 ROM?

I would love to start from scratch but I can't flash ROMs and I get a bootloop when I try to use my backup. So I can't boot into system and its the same as the i747 just without the att bloatware and rogers instead

Just flash the stock rooted ROM from xda. Just search for s3 pre-rooted roms , download, and flash via Odin

audit13 said:
Just flash the stock rooted ROM from xda. Just search for s3 pre-rooted roms , download, and flash via Odin
Click to expand...
Click to collapse
Thanks sounds simple enough but I will have a hard time getting a windows PC to use. In the meantime is there anything else I can try? Is it possible to flash cwm through twrp or does that not work? If it does will it harm the Odin process to go back to stock? And will USB debugging work if no OS is installed on phone... How does that work?

Let us know what was the most recent stock ROM you had on your phone. Is it 4.1.1, 4.1.2, or 4.3?

drewstopher said:
Thanks sounds simple enough but I will have a hard time getting a windows PC to use. In the meantime is there anything else I can try? Is it possible to flash cwm through twrp or does that not work? If it does will it harm the Odin process to go back to stock? And will USB debugging work if no OS is installed on phone... How does that work?
Click to expand...
Click to collapse
Do you have any computer available just not Windows? Or none at all? Did you look at heimdall?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Do you have any computer available just not Windows? Or none at all? Did you look at heimdall?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Android 4.3 and heimdall wasn't working with my Mac.

Question for the op.. Do you get any errors in twrp when you wipe data or restore your backup?
Sent from my SGH-I747 using xda app-developers app

bdithug said:
Question for the op.. Do you get any errors in twrp when you wipe data or restore your backup?
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Actually yes occasionally I do. I think its after I try to flash a ROM or .zip file but it might happen periodically anyway I don't know

drewstopher said:
Actually yes occasionally I do. I think its after I try to flash a ROM or .zip file but it might happen periodically anyway I don't know
Click to expand...
Click to collapse
You probably need to format your internal SD card from twrp (the option where you have to type the word "yes") I believe it's under advanced wipe settings. I would backup anything important from your internal card, then format it. Then try doing whatever you're trying to do (flash a certain rom or restore a certain backup). I had a similar issue last week. I couldn't flash roms or restore backups because the phone would reboot into a bootloop when twrp tried wiping the data partition.
If you can't get into a rom or connect to a computer to backup your internal cards contents, you may have to use the file manager inside twrp to backup to your external SD card.
Sent from my SGH-I747 using xda app-developers app

bdithug said:
You probably need to format your internal SD card from twrp (the option where you have to type the word "yes") I believe it's under advanced wipe settings. I would backup anything important from your internal card, then format it. Then try doing whatever you're trying to do (flash a certain rom or restore a certain backup). I had a similar issue last week. I couldn't flash roms or restore backups because the phone would reboot into a bootloop when twrp tried wiping the data partition.
If you can't get into a rom or connect to a computer to backup your internal cards contents, you may have to use the file manager inside twrp to backup to your external SD card.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks but actually my backups and ROMs are all on the phones internal memory. I think my safest bet will be to flash a ROM and cwm via Odin any suggestions on what version of Odin to use? Iv used 1.85 before to flash my gs2 skyrocket. Also will the USB debugging work if no os is installed on the phone :/

drewstopher said:
Thanks but actually my backups and ROMs are all on the phones internal memory. I think my safest bet will be to flash a ROM and cwm via Odin any suggestions on what version of Odin to use? Iv used 1.85 before to flash my gs2 skyrocket. Also will the USB debugging work if no os is installed on the phone :/
Click to expand...
Click to collapse
Not sure sorry.. And I could be wrong but I think if you flash stock from Odin, it wipes your internal memory as well. If that's the case, I would backup whatever rom/backup you plan on using to your external memory and try my advice.
Other than that, not sure what to suggest. I can only advise based on what I have personally done in the past.
Sent from my SGH-I747 using xda app-developers app

bdithug said:
Not sure sorry.. And I could be wrong but I think if you flash stock from Odin, it wipes your internal memory as well. If that's the case, I would backup whatever rom/backup you plan on using to your external memory and try my advice.
Other than that, not sure what to suggest. I can only advise based on what I have personally done in the past.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks and good point

I use twrp on the n7 and its exellent. I tried it with the s3 and always had random problems after a flash or restore. I switched to Phil's cwm touch and have nor had a problem in months and I flash or restore almost daily.

I am on stock based custom rom on my i747m (canadian) TWRP 2.7.0.0 works perfectly, no issues.
Just in-case someone doesn't know they have newer version of twrp for both Us and Canadian versions.

Aroma only installs selected apks not system files

When I try to install Hyperdrive rom latest release 15 I select all i want in the aroma but then it starts to install only the apps i chose. It is not installing any of the mandatory system files which makes sense why it installs in like 10 seconds.. I wipe everything sys, delvik cache, cache, data.. using TWRP 2.7.0.1

please help me
This is also happening when I try to install Wicked Rom so ANY suggestions would be awesome. I'm probably going to return to stock and then flash new rom

after reinstalling stock firmware through odin and then trying to install a custom rom same thing is still happening so im guessing i should try and go to stock and than completely wipe everything and then try from there?

I'd install a ROM that doesn't have an aroma installer. Then install the one you want with aroma.
Sent from my SGH-M919 using XDA Premium 4 mobile app

After successfully installing stock and TWRP recovery 2.7.0.1
I took your advice and tried install gpe rom and still after rebooting i just get a black boot screen samsung galaxy s4 screen
Is there more i could wipe like a partition that is still bad maybe?

I'm going to go to stock again but this time with odin 3.07 not what i was using which was a much older odin and im going to then install a custom recovery and root and please do tell me your favorite recovery im probably gonna try oudhs cwm and then ill see if i run into problems installing roms.
The main problem is the rom likes to install all its apk options for example adobe reader or samsung music app but it will NOT install any mandatory system files which make the phone work.
after i get stock i also wipe data factory reset in stock recovery which delete everything which is fine i knew it would.
This time i'll also be resetting the flash counter which i havent done

Have you tried using clockworkmod recovery with ROM manager?
Sent from my SGH-M919 using XDA Premium 4 mobile app

Android_Monsters said:
Have you tried using clockworkmod recovery with ROM manager?
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I haven't but i will try. At the moment i am at stock firmware and I would like to know what my filesystem should look like.. When I go into just "/" section before sdcard it shows me lots of folders some looking unnessary and maybe in the way of installing my rom normally View attachment 2650548
View attachment 2650549
View attachment 2650550

Could this be a bootloader issue or something with my filesystem because I can tell these roms are all avoiding like half of their installation. They should be extracting more files and take more than 20 seconds to install

Which bootloader do you have?
Sent from my SGH-M919 using XDA Premium 4 mobile app

How do I see what kind of bootloader i have i search google and im still unsure.
And do you think i could try deleting everything in my filesystem and then odin stock flash and then try to flash rom?

In settings, about phone what is your baseband? Mine for example is FNB4.
Sent from my SGH-M919 using XDA Premium 4 mobile app

Reinstalling stock for 4th time when i get it up ill give you that baseband version.
I was looking on Odin at this Nand erase all and i googled alot and looked around but i don't think its useful in my case so i wont check it
there was a thread saying that you could repair your phone if your data was set to a read only not write but i checked with adbshell mount and all my stuff is rw so im good there..
I haven't ever had a problem where rom doesn't fully install..
I was minding my own business on GPe rom from Kot94h and it was good but i decided hmm this has been my daily driver for queit some time ill switch to hyper drive and bamm i realize stuff isn't going right.

My Baseband Version is M919UVUAMDL
on Android 4.2.2
I feel like I've tried every trick in the book with no success

I'm wondering if it's the team win recovery. I'd try cwm.
Sent from my SGH-M919 using XDA Premium 4 mobile app

Karakoram2 said:
I'm wondering if it's the team win recovery. I'd try cwm.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried CWM CWM-oudhs thing and ive tried team win.
for now im going to run stock and restore my stuff but hopefully i can get to the bottom of this
I can't think of where the source of the problem is.
I find it interesting how while an app installs i see it installing like system/app/blahblah.apk and that is like the first thing it starts to install
i think if i can remember a rom usually does system/framwork or something along those lines first
I have also MD5 checked all my files and they are all perfectly matching

Any Ideas?

I have this idea to try and erase every file on my device and then flash a room is that even possible

Could someone download root file explorer and go to their "/" and just snap a pic of the folders i want to compare your folders properties for example one of mine say rwxr-xr-x

Or i have another idea.
Is it possible to reformat my system partition with odin maybe with a PIT file??
Think, why would a rom skip installation of system files? It looks like it blazes through the installation after installing a few system apps