Develop Bugs

QPST and Diamond?

Hi,
Is there any to get the diamond to work with QPST, I guess it needs the wireless modem mode?? Thanks!
DrD

Hello,
I have the same problem to connect Diamond with QPST. The Diamond of mine is WCDMA version. I have tried to dial ##3424, ##3424# and ##DIAG, but it didn't work. Besides, I put the dmrouter.exe into the phone and executed it. But there is no new com port while pressing "Start" button.
Does anyone know how to connect Diamond with QPST? Should I upgrade the rom?
Thanks in advance.

drdespair said:
Hi,
Is there any to get the diamond to work with QPST, I guess it needs the wireless modem mode?? Thanks!
DrD
Click to expand...
Click to collapse
I am pretty sure QPST is not freeware, shareware or any kind of ware for which the use is endorsed on this forum. I doubt you will get any replies here. QPST isn't really to be played with if you don't know what you are doing; or better put, if you are not a qualcomm engineer.

drdespair said:
Hi,
Is there any to get the diamond to work with QPST, I guess it needs the wireless modem mode?? Thanks!
DrD
Click to expand...
Click to collapse
With the diamond I think you have to go into wmdc and disable usb connections, put the phone into diag mode (usually ##diag# or ##3424#) and then plug it in. Should show up in the comm manager as "htc diagnostic port" assuming you're using the correct driver. It's posted somewhere around these forums I think, you can search it out.
Silent: What sys are/were you using and did flashing a new rom fix you up as far as entering diag mode?

Bell SGH-I747M Service mode stuck at UART

Does anyone know how to enable usb under service mode (*#9090#). Every time I enter service mode and select USB (option #1), it tells me to reboot to have the settings changed. After the reboot, it will automatically revert to UART (option #2). Is there a way to make it stay at USB (option #1). I am trying to unlock through usb data cable from fastgsm and I need to selection that option in order for the unlocking client to work.
thanks.

Do any of the options available using *#7642# help?
Sent from my SGH-I747 using Tapatalk 2

lordmorphous said:
Do any of the options available using *#7642# help?
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Nope. They are for qualcomm settings.
I'm trying to get the phone to stay at usb mode instead of reverting back to uart
Sent from my SGH-T679 using Tapatalk 2

PC Not Recognizing Note 2 via USB

I have tried uninstalling and reinstalling the samsung drivers at least 4 times, rebooted phone and pc multiple times, tried 3 different PCs and still nothing.
Nothing(other than charging) pops up on the PC's or the phone when I plug it in. I have tried checking USB debugging several times.
Any ideas?

This just started happening to me today as well haha
Can't figure out why either

Did you get the current drivers from Samsung's site?
How about flashing any recent changes on the phones?
Does it indicate anything on the phone?
Any info - no matter how trivial it may seem - would help. Thanks!

I just got it to work by using the OEM usb cable that came with the NOTE 2.
Previously, I had tried 2 different htc cables, an LG cable and a random generic one. Really odd that it was the cable.

5harkology said:
I just got it to work by using the OEM usb cable that came with the NOTE 2.
Previously, I had tried 2 different htc cables, an LG cable and a random generic one. Really odd that it was the cable.
Click to expand...
Click to collapse
It was this way with the E4GT as well. Explanation I was given at the time was that the pin connections are longer on Samsung than most. That's why most cables except Samsung and BB cables fail on data but fine on power.

I've used the same cable the entire time. It's still not recognizing it.

SUPARSTARX said:
I've used the same cable the entire time. It's still not recognizing it.
Click to expand...
Click to collapse
Is it a Samsung cable?

5harkology said:
Is it a Samsung cable?
Click to expand...
Click to collapse
Yeah it's the one that came with the phone. I tried another cable and still doesn't work. I don't know what changed with my phone. I've done nothing notable to it.

Please post all questions in Q&A
Thread moved
Thanks
FNM

Right click the usb icon in the task bar and find your phone in the devices. Then trouble shoot it. I have to do this just about every single time I want to connect and transfer something.

SUPARSTARX said:
Yeah it's the one that came with the phone. I tried another cable and still doesn't work. I don't know what changed with my phone. I've done nothing notable to it.
Click to expand...
Click to collapse
Try this:
1) Launch the phone app
2) Dial ##3424#
3) Choose "Qualcomm USB Setting"
4) Choose "MTP + ADB"
5) Press OK button
Sent from my SPH-L900 using Xparent SkyBlue Tapatalk 2

similar issue
hey guys am new here so sorry for my first post being a problem
ok so im kinda new to the android scene after many years of apple products i can safely say i wont be returning lol very impressed and gutted i didnt switch to android a long time ago...
anyway the problem i have is that after doing a lot of reading and browsing this forum i installed a few different kernels and then started with roms, and now discovered neither Bluetooth or usb works Ive tried many different things including restoring back to stock rom and kernel rebooting several times both PC and phone, ive tried a few other things that seemed to fix for others i installed the drivers at least 9 times now and kies over and over, also tried the galaxy note tool kit but it just wont see the phone it just charges it ive also tried a different cable and the same problem is there... the only option ive not tried is to completely remove root and start again, but the problem i have is that if that doesn't fix it is that i wont be able to root again through odin,
Ive enabled usb debugging etc also nothing im really lost with this now as want to transfer files that's when i realized Bluetooth wont switch on either
i upgraded to 4.1.2 with the omega rom also and still the same now am back to 4.1.1 through a saved restore
so pls any advice or pointers would be amazing

AlpineMan said:
Try this:
1) Launch the phone app
2) Dial ##3424#
3) Choose "Qualcomm USB Setting"
4) Choose "MTP + ADB"
5) Press OK button
Sent from my SPH-L900 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Tried this and I get an error message saying: Connection problem or invalid MMI Code.

hezahonker said:
Tried this and I get an error message saying: Connection problem or invalid MMI Code.
Click to expand...
Click to collapse
Error is on the phone or PC? And what cable are you using? It should be the stock white cable - even the S2 cable doesn't work for me.

garwynn said:
Error is on the phone or PC? And what cable are you using? It should be the stock white cable - even the S2 cable doesn't work for me.
Click to expand...
Click to collapse
This is correct. I rooted a Note II last night using the white cable. The easiest way is to enable us debugging on the phone and issue the command from your:
adb reboot download
Once it is in download mode you can push your md5 with Odin
Sent from my ADR930L using xda app-developers app

schourry voice
Webmast84 said:
This is correct. I rooted a Note II last night using the white cable. The easiest way is to enable us debugging on the phone and issue the command from your:
adb reboot download
Once it is in download mode you can push your md5 with Odin
Sent from my ADR930L using xda app-developers app
Click to expand...
Click to collapse
Indeed. I did try using a Nexus 7 usb cable and wouldn't recognize my phone but only to charge it not as a usb device. I then plugged another cable that it came with a spare S3 that I have and that worked for me.

i think it shoud be *#7284#

usb/mtp/ptp
I have CM12.1 on SPH-L900, when I go to settings>storage and click USB computer connection, it says USB is disconnected, I don't get the MTP/PTP menu.
I've tried in debug mode, I've tried *#7284#, and many others but none bring up a phone util screen. any help would be, helpful. :laugh:
I used CWM to install.
edit: so I grabbed every cable I had and one worked, happened to be for a kodiak camera.

[Q]Cant not connect to CDMA Workshop ??

Hello,guys,I recently bought a Galaxy Note II SCH-L900 flashed to Criket and everything works well on the phone except I can not open the COM port to connect to CDMA workshop nor other cdma tools.
Any help would be appreciated,thanks.

Double check your drivers
Sent from a galaxy note 2 far far away...

mexiking713 said:
Double check your drivers
Sent from a galaxy note 2 far far away...
Click to expand...
Click to collapse
The driver works well and I can connect the another Sprint Galaxy Note 2 to CDMA Workshop,I have tried many method to get it work,such as flash stock roms,tested ##7284#,##3424# etc,the COM port appears in th device manager but I can not connect to the CDMA tools,such as DFS,CDMA Workshop,QPST,QXDM,etc. I also tested it on a Win 7 computer and a Win XP computer, I failed finnaly.
I also checked that the phone has been flashed to Metro Pcs.

newyeskaron said:
The driver works well and I can connect the another Sprint Galaxy Note 2 to CDMA Workshop,I have tried many method to get it work,such as flash stock roms,tested ##7284#,##3424# etc,the COM port appears in th device manager but I can not connect to the CDMA tools,such as DFS,CDMA Workshop,QPST,QXDM,etc. I also tested it on a Win 7 computer and a Win XP computer, I failed finnaly.
I also checked that the phone has been flashed to Metro Pcs.
Click to expand...
Click to collapse
Does any know why ? help me please :crying:

newyeskaron said:
Does any know why ? help me please :crying:
Click to expand...
Click to collapse
I have the same problem!! Flashed a Galaxy Note 2 SPH-L900 back to the stock lj1 rom so it would read cause the 4.1.2 doesn't work from what everyone was saying and even then I still cant read the phone even with the Msl! It connects to the com port, I hit read and I get Failed...phone does not answer!! I changed the modem to lj1 and ljc hard reset even the *##786# to rest the phone numbers and all and still wont connect.I have the correct usb drivers and I put it in DIAG Mode using ##3424# selected PDA and then hit qualcom usb settings..then select DM+MODEM+ADB. I'm using CDMA WS 3.8.0 AND QPST 2.7 V 378
I've flashed many phones and never had this problem...any help???

You guys are doing way too much. A) 4.1.2 works perfectly fine for flashing anything B) I've flashed a 4.3 (MK4) L900 to Boost just fine. You do NOT need to downgrade anything. C) If other phones connect fine but yours doesn't then it could possibly be a bad USB port on that particular phone.
IF your problem phone DOES show a COM port in device manager but won't connect, put it back into MTP USB mode, disable USB debugging, restart the phone (shut it down, pull the battery, put the battery back in, power up the phone) and put it on DM+MODEM+ADB. DO NOT ENABLE USB DEBUGGING THROUGH THE SETTINGS MENU. IT WILL BE ENABLED THROUGH QUALCOMM USB SETTINGS!!! This has worked for every "bricked" DM port S3 and Note 2 I've come across.
Sent from my SPH-L900 using xda app-developers app

[Q] SPH-L520 not responding in CDMA

I am trying to connect my Sprint L520 to CDMA workshop and seem to be getting no go on it. It is on Android 4.2.2 running stock unrooted ROM. The phone will show up in CDMA as the Samsung Mobile USB Serial Port but when I hit connect it connects but when I put the SPC which is not 6 zeroes (got it from MSL UTILITY) It says phone does not respond. any ideas? I am assuming there is somewhere another Hidden menu that is still disabled which I will need to toggle before I can successfully connect to CDMA. I got it on DM+Modem+ADB plus USB Debugging. Any ideas will be greatly appreciated!

Not entirely sure or not of what you're trying to do but I'll say this. Try a different usb port. Make sure there's only one instance of that work shop going. Restart the device and pc. Follow another guide or find out if knox is preventing you.
Sent from my SCH-I545 using Tapatalk