My brother broke the lcd on his phone so bought a bricked one x and swapped the lcd's so now i have the job or sorting out the bricked one x.
I have the device currently charging using the batch script and its at 3791mV at the minute. Once I boot it into boot loader I cant unlock it with the unlockcode.bin file as it says too many links and the phone reboots as soon as I hit yes to unlock. It currently says locked so I assume that means it hasn't been unlocked before.
I cant get into recovery either it just shows the htc logo along with the red writing at the bottom. So I cant get into recovery, cant unlock and have to charge very slowly using a batch file.
The CID is o2_001
Hboot is 0.94.0000
Radio is 1.1204.103.14
fastboot getvar version-main = !.28.206.9
I downloaded the ruu RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2 as its the most recent I could find but its too out of date.
Any help would be appreciated, Thanks
Related
I unlocked the bootloader and rooted. All was working well
I installed LCD Monitor Pro, I tried to change density to 240dpi and but it wouldn't accept it
When I rebooted the phone, it is not stuck on the 'htc quietly brilliant' screen
I have tried 'fastboot erase cache' and 'fastboot reboot-bootloader', but no luck
I have tried searching for the answer too but haven't found anything
Any help?
Thanks
Ok seems I need to use a RUU
(note I am running the stock ROM - can I still use endeavour RUU's?)
My CID is HTC_001 (I have the GSM Unlocked version)
However, I cannot find a reference to CID on the RUU page, so I am not sure which to download
Note: My phones radio (according to fastboot) is 1.1204.103.14
So, is this the current RUU? RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.28.401.9_Radio_1.1204.103.14_release_256469_signed.exe
Just make sure you relock the bootloader before flashing
And you may want the latest RUU_ENDEAVOR_U_ICS_40_HTC_Europe_1.29.401.11_Radio_1.1204.105.14_release_260491_signed.exe
It worked, cheers mate!
Ive just receive my htc wildfire s from the repair shop after hard bricking it by myself, they manage to bring my phone back to access bootloader but still stuck on htc green and white logo when you just turn it on,they used jtag method..my problem is I dont know what firmware should i use to flash my phone and bring it back to stock gingerbread firmware..
here is my bootloader info :
hboot - 0.90.000
radio - 7.46.35.08
I dont have any ***locked*** or ***unlocked*** phrase on the first line indicated - (and ive read some articles in other forum that it is necessary to update the bootloader to have ***locked oow*** appear on my bootloader and update my hboot to 1.08.0099 - 1.10.000 and then unlocked my bootloader via htc.dev officially).
one more thing , ive tried flashing extracted ruu from football's post because like what ive said my phone is stuck on htc white and green logo when turning it on after a jtag...but my log says that "main version is older" ,, i tried it using goldcard and plain micro sd card.. So the big question is WHAT firmware or rom should i flash in order to use my phone again?? do i need to update bootloader first??? or what..what method should i use??? thus my wildfire s is still brick or un recoverable???
hoping someone can educate and help me.... thanks
by the way asian user here.
I ordered a used HTC One X and it arrived today, needed to get a micro sim for it so i bought it, however whenever I tried to enter the sim unlock code on start up it kept saying request unsuccessful. After searching on this forum I found that the problem was because the phone had already been flashed on cyanogenmod 10, I was told that I would have to flash to a 'sense' rom for me to be able to unlock the sim. Having done this now I have managed to possibly brick my phone.
It gets passed the HTC logo and the jellybean loading screen keeps looping (jellybeans floating around screen). I downloaded the all-in-one kit and tried flashing stock recovery and kernal, and it managed to get past the booting screen to a screen showing that android is updating. however once it got to updating the last app it got stuck again. since then i havent managed to get back on that screen, just a continuous bootloop.
the phone originally was on Android Jelly Bean 4.1.2, with cyanogenmod 10(i think it was 10)
I tried flashing it to this http://forum.xda-developers.com/showthread.php?t=1546970
UNLOCKED
endeavoru pvt ship s-on RL
HBOOT-0.96.0000
CPLD-NONE
MICROP-NONE
RADIO-1.1204.105.14
the CID is ORANG001
perhaps I could fastboot an RUU?
Would really appreciate any help you could offer :crying:
also did the following
"If you have stock recovery
Download a Custom Recovery
Then flash it with the command:
fastboot flash recovery recovery-clockwork-touch-5.8.3.1-endeavoru.img
Now you can flash a new ROM or nandroid backup"
now i cant even get to recovery. trying to flash recovery from all-in-one kit and it just says "waiting for device" now
Do you know fastboot commands
Phone in bootloader/fastboot usb mode
Fastboot getvar version-main
Mr Hofs said:
Do you know fastboot commands
Phone in bootloader/fastboot usb mode
Fastboot getvar version-main
Click to expand...
Click to collapse
Yes, problem is now whenever I type in these commands I just get "waiting for device". I dont think my laptop is recognising the phone anymore, theres no sound playing when plugged in/out anymore
Were you aware that the phone already had CM10?
yash777 said:
Were you aware that the phone already had CM10?
Click to expand...
Click to collapse
Yea, I didnt think it would have had any issues with the sim card like that
Mr Hofs said:
Do you know fastboot commands
Phone in bootloader/fastboot usb mode
Fastboot getvar version-main
Click to expand...
Click to collapse
I re-installed HTC Sync and managed to get connected to fastboot again
the version is 1.29.061.11
ive also managed to get CWM recovery working again
Here is the link to the ruu you need
http://androidfiles.org/ruu/securek...Radio_1.1204.105.14_release_260736_signed.exe
Install :
Put the phone in fastboot usb mode and lock the bootloader
Fastboot oem lock
Keep the phone in fastboot usb mode and right click the ruu on the pc and run it with admin rights !
It will bring back the phone to full stock and you will also be able to update the phone to software 2.17 ICS and after that to software 3.14 JB
Note : it will wipe the whole phone so back up stuff if needed :thumbup:
I managed to get it working in the end by doing that same method, took me forever to find the right ruu!
Thanks for your help :good:
Hey guys! It seems I've run into the same problem but unfortunately this fix is not applicable to me because my hboot is 3.16, which means there is no RUU available for my device! Can anyone help me??
Hi,
i have the One X from a friend in front of me
S-ON and HBOOT 1.72.0000
..the first ONE X from him can i unlocked and rooted
but here is a big problem:
when i insert on htcdev the identifier token the website load and load and nothing happens
and the screen will get empty
when i insert a wrong identifier token the website load the false code
Have anyone an idea what's wrong or what can i make ..... i'm not a noop but i can't explaine what's wrong on htcdev
Greetz
Oliver
pm sent
I have a similar problem
Device can't boot
Recovery not accessible
Wasunlocked but suddently it became locked again
I am on 1.72 hboot and the unlock procedure can't complete, after answerying yes on the screen i get "too many links" error on the pc, the phone restart in bootloader but still locked.....
any help???
spitjo said:
I have a similar problem
Device can't boot
Recovery not accessible
Wasunlocked but suddently it became locked again
I am on 1.72 hboot and the unlock procedure can't complete, after answerying yes on the screen i get "too many links" error on the pc, the phone restart in bootloader but still locked.....
any help???
Click to expand...
Click to collapse
i have same problem.. can help me?
Hi,
I've been handed a HTC 10 locked to the Three network in the UK which has been tampered with and I'm looking to restore the firmware.
I'm not sure what the previous owner has done but the device boot loops when attempting to boot into Android or Recovery with a red warning message quickly appearing.
The device boots into download mode fine, it states it's relocked and S-ON and fastboot seems to function fine but I'm unable to flash anything to the device due to it being locked and S-ON, unable to get into Anroid I cannot enable OEM Unlock to unlock the device again.
I've been hunting the web for HTC 10 H3G__001 RUU but am not able to to find anything anywhere, the unlocked and european versions always fail due to the CID mismatch.
If anyone can provide the RUU for my particular device or point me in the right direction I would be very grateful, HTC support aren't really proving to be any help in providing such.
Just an RUU zip to be placed on the SD so I can restore from the download menu is all I ask.
Thank You!