rom not active
have to install recovery 6.0.12 not?
knifpro213 said:
rom not active
have to install recovery 6.0.12 not?
Click to expand...
Click to collapse
question is confusing please describe problem? and why you want to install cwm 6.0.1.2?
crossfire77 said:
question is confusing please describe problem? and why you want to install cwm 6.0.1.2?
Click to expand...
Click to collapse
I'm using CLOCKWORKMOD 5.0.2.8
if I want to install rom should CLOCKWORKMOD some?
knifpro213 said:
I'm using CLOCKWORKMOD 5.0.2.8
if I want to install rom should CLOCKWORKMOD some?
Click to expand...
Click to collapse
if you want to install clockworkmod 6.0.2.1 just flash that file from recovery.and you can install any rom from your clockworkmod 5.0.2.8
crossfire77 said:
if you want to install clockworkmod 6.0.2.1 just flash that file from recovery.and you can install any rom from your clockworkmod 5.0.2.8
Click to expand...
Click to collapse
but me install rom is it error
did you wipe everything..
Follow steps:
Factory reset/wipe system
Wipe cache
Wipe dalvik cache
(Do twice for sure)
Then,
Install from zip
And select your rom.
It ll work.no need to flash another recovery.
If it wont,might your rom file is corrupted.
Sent from my HTC Wildfire S A510e using Tapatalk 2
crossfire77 said:
did you wipe everything..
Follow steps:
Factory reset/wipe system
Wipe cache
Wipe dalvik cache
(Do twice for sure)
Then,
Install from zip
And select your rom.
It ll work.no need to flash another recovery.
If it wont,might your rom file is corrupted.
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
I thank you much
I think the rom is corrupt
Welcome...
If you want touch recovery you can download TWRP recovery.
Its official touch recovery and supports all features.
You can download Goo manager application from play store.
And then from it you can install that.
But its optional. Cwm recovery is cool enough.
Sent from my HTC Wildfire S A510e using Tapatalk 2
crossfire77 said:
Welcome...
If you want touch recovery you can download TWRP recovery.
Its official touch recovery and supports all features.
You can download Goo manager application from play store.
And then from it you can install that.
But its optional. Cwm recovery is cool enough.
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
I also installed all the other rom and still , still fails "status 7"
knifpro213 said:
I also installed all the other rom and still , still fails "status 7"
Click to expand...
Click to collapse
do you have wildfire s 2012 model? my meaning is you purchased your phone in 2012? because if it is,you can't flash custom roms other than sense based and also only modified cwm recovery ll work. you can find it in general section.
crossfire77 said:
do you have wildfire s 2012 model? my meaning is you purchased your phone in 2012? because if it is,you can't flash custom roms other than sense based and also only modified cwm recovery ll work. you can find it in general section.
Click to expand...
Click to collapse
means that I can not up the rom?
Yeah...wfs 2012 has some problems..im not sure about it.but i read some threads they said..its not compitable with any custom roms except sense roms and you should hv install modded cwm recovery.search threads for it.
Sent from my HTC Wildfire S A510e using Tapatalk 2
Related
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium
Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.
pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2
How to do flash stock ROM as the backup that I made is not working properly.
pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.
Full wipe is obligatory
Installing Kernel via Kernel flasher is obligatory, otherwise your device won’t boot!
^^^
^^
^
in rom installation details written like this >>
THE QUESTION HERE !! FLASHING THE BOOT.IMG FOR ROM VIA CMD IS NOT ENOUGH ????
I haven't tried yet but I think the kernel flasher also flashes modules which may not be present in the Rom
Sent from my ViperX
command for boot.img work fine
Is available a FAQ post about MaximusHD 20 at this link
About it you must flash the given boot.img in the kernel flasher and perform a full wipe. Other kernels don't working on it. TWRP 2.6 is recommended because with other recoveries you may be stuck on 0% or 8% during the installation.
All is totally working with no bugs, if you have one you should retry a celan flash.
Good luck and enjoy :laugh:
frezd91 said:
Is available a FAQ post about MaximusHD 20 at this link
About it you must flash the given boot.img in the kernel flasher and perform a full wipe. Other kernels don't working on it. TWRP 2.6 is recommended because with other recoveries you may be stuck on 0% or 8% during the installation.
All is totally working with no bugs, if you have one you should retry a celan flash.
Good luck and enjoy :laugh:
Click to expand...
Click to collapse
Works fine with twrp 2.4, for some reason twrp 2.6 won't respond to touch on my hox
Sent from my HTC One X using xda premium
Whoareyou said:
Works fine with twrp 2.4, for some reason twrp 2.6 won't respond to touch on my hox
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Which version of hotboot do you have? Have you clean dalvik via fastboot after flashing?
Whoareyou said:
Works fine with twrp 2.4, for some reason twrp 2.6 won't respond to touch on my hox
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thats because you updated the phone to at least 3.17 software or higher (updated touch drivers !)
Indeed use twrp (repacked) or philz. Btw flashed it with philz myself, no issues
Sent from my HTC One X using XDA Premium 4 mobile app
@Mr Hofs
is clockwork recovery fine for installing this rom ?
or do u recommend philz recovery ??
If yes then how do i change from cwm to philz ?
Philz has a zip file whereas cwm is .img file
I installed cwm through cmdpromt
But how do i install philz through cmd ?
ronu said:
@Mr Hofs
is clockwork recovery fine for installing this rom ?
or do u recommend philz recovery ??
If yes then how do i change from cwm to philz ?
Philz has a zip file whereas cwm is .img file
I installed cwm through cmdpromt
But how do i install philz through cmd ?
Click to expand...
Click to collapse
hey mate,
1. +2. All recoverys should work. TWRP 2.6 is recommand. Some Philz users reported issues (stuck @ 0%, bootloop etc.).
3. Just flash it via fastboot.
4. Unzip it and you will find a .img file
5. fastboot flash recovery recovery.img
fastboot erase cache
ryman95 said:
hey mate,
1. +2. All recoverys should work. TWRP 2.6 is recommand. Some Philz users reported issues (stuck @ 0%, bootloop etc.).
3. Just flash it via fastboot.
4. Unzip it and you will find a .img file
5. fastboot flash recovery recovery.img
fastboot erase cache
Click to expand...
Click to collapse
Thanks i will try this ! :good:
Guys official OTA is available in many countries. The new base is 4.18.401.2 but the Maximus is on 4.18.401.1. Also the hotboot is updated to 1.72.
I hope in a OTA update of Maxiums and not in another clean flash
I won't recommend any recovery. But philz has a fully functional one. Twrp is a good recovery but in the repacked version adb and ums does not work. And in philz it all does work. I use philz and flashed the sense 5 rom with succes. Just sharing my experience
Sent from my HTC One X using XDA Premium 4 mobile app
And as for the kernel, flashing it via fastboot is fine. the kernel flasher is a simple batch file to simplify things, but it doesn't appear to fastboot erase cache, so imo it is better to flash the boot image manually. I did and it's working flawlessly
MaximusHD 21 with base 4.18.401.2 is available, but on OTA you find the full rom, so 700MB.
I don't know if in the kernel flasher provided by football there is the wipe cache script, maybe the missing wipe can cause wifi issue.
frezd91 said:
MaximusHD 21 with base 4.18.401.2 is available, but on OTA you find the full rom, so 700MB.
I don't know if in the kernel flasher provided by football there is the wipe cache script, maybe the missing wipe can cause wifi issue.
Click to expand...
Click to collapse
kernel flasher only flash boot.img, no wipe of any kind.
wackywonderkid said:
kernel flasher only flash boot.img, no wipe of any kind.
Click to expand...
Click to collapse
An alternative is instead of rebooting your device from fastboot is to go back to hboot, load into recovery and manually wipe cache partition.
Tigerlight said:
An alternative is instead of rebooting your device from fastboot is to go back to hboot, load into recovery and manually wipe cache partition.
Click to expand...
Click to collapse
In any case if you select full wipe while installing the rom in the log you can read wiping cache so theoretically no problem. But a dev daid to me that is safer clean from fastboot
ar3na2012 said:
command for boot.img work fine
Click to expand...
Click to collapse
Yep, Flashing using cmd and erasing cache is working just fine.
See whats inside "Flash kernel.bat": nothing special but standard "fastboot flash boot boot.img"
Hi,
I've tried yesterday to install MaximusHD, and I had some trouble.
First I've unlocked the phone, this went fast.
Second according to the manual in MaximusHD forum I flashed the Kernel, I then tried to go to recovery but I only got red exclamation.
The second problem I've got is that I lost my IMEI.
I solved the IMEI problem by flashing boot.img from the RUU of my phone.
maybe it's because I'm a noob, but please help.
Thanks,
Phone: ENDEAVOR
cid: HTC_K18
HBOOT: 1.39
OS: JB 4.1.1
Hi,
After root you need to install a custom recovery specific for the phone, search for it in xda "One X Android Dev" form.
After this you can flash the boot.img for the custom ROM and then flash via the custom recovery the ROM, when aroma installer asks do the Full Wipe,
This will wipe clean the Data, System, and may be the cache partitions so wipe the Cache partition before installing the new ROM,
Good luck
Sent from my HTC One X using XDA Premium 4 mobile app
You need a custom recovery! You can choose between TWRP or CWM. Or you have your own (but I guess not so...)
Gesendet von meinem HTC One X mit Tapatalk 4
can't install updates
Hi,
I've got an update (Wi-Fi fix) but I can't install it .
In the recovery its written that the installation is aborted .
Can anyone advise me ?
verany said:
Hi,
I've got an update (Wi-Fi fix) but I can't install it .
In the recovery its written that the installation is aborted .
Can anyone advise me ?
Click to expand...
Click to collapse
What recovery did u install?
ChiDi9901 said:
You need a custom recovery! You can choose between TWRP or CWM. Or you have your own (but I guess not so...)
Gesendet von meinem HTC One X mit Tapatalk 4
Click to expand...
Click to collapse
Or Philz Advanced.
convict_moody said:
What recovery did u install?
Click to expand...
Click to collapse
CLOCKWORK
Hi sir plz help me im going to root my n7100 flash Philz recovery flash CF-Auto-Root n7100 root success update super user and download root checker and success then flash DN3 4 RC2 reboot but im stuck on boot i have a backup my 4.3 rom in my sdcard go to restor but still stuck on boot
plz help me
Are you able to get in recovery?
Make sure you have latest philz
You need to go to wipe .. Clean to install new ROM
Then go to flash section and before you click flash from sdcard/sdcard1
There is an option says "verify ..."
Untick it
Then install DN3
Reboot
Hopefully that works.
Sent from my GT-N7100 using Tapatalk
Mohammed779 said:
Are you able to get in recovery?
Make sure you have latest philz
You need to go to wipe .. Clean to install new ROM
Then go to flash section and before you click flash from sdcard/sdcard1
There is an option says "verify ..."
Untick it
Then install DN3
Reboot
Hopefully that works.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
yeah bro i able a recovery but where i got this option >>>>> There is an option says "verify ..."
hunting_ said:
yeah bro i able a recovery but where i got this option >>>>> There is an option says "verify ..."
Click to expand...
Click to collapse
Oops I messed up the name, its called
"Don't Allow Old Update-Binary" under install zip
Make sure you wiped your device, then untick the option then install DN3.
Sent from my GT-N7100 using Tapatalk
Mohammed779 said:
Oops I messed up the name, its called
"Don't Allow Old Update-Binary" under install zip
Make sure you wiped your device, then untick the option then install DN3.
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Iam not gatting this option bro >>>> Don't Allow Old Update-Binary" under install zip
hunting_ said:
Iam not gatting this option bro >>>> Don't Allow Old Update-Binary" under install zip
Click to expand...
Click to collapse
What.. When you enter philz recovery, go to install zip ..
Then its nearly the 3rd option from the bottom.
Allow Old Update-Binary (x)
Sent from my GT-N7100 using Tapatalk
Latest philz 6.25.0
Mohammed779 said:
What.. When you enter philz recovery, go to install zip ..
Then its nearly the 3rd option from the bottom.
Allow Old Update-Binary (x)
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
Hi,download the latest philz here:http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100
install it on phone via odin pc (pda or ap)
reboot phone in recovery
install zip
wipe/data factory reset
click on clean to install a new rom
install zip/choose your rom/flash it
reboot and enjoy : D
Mohammed779 said:
What.. When you enter philz recovery, go to install zip ..
Then its nearly the 3rd option from the bottom.
Allow Old Update-Binary (x)
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
there is no any 3dr option in install zip
dabenaute said:
Hi,download the latest philz here:http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100
install it on phone via odin pc (pda or ap)
reboot phone in recovery
install zip
wipe/data factory reset
click on clean to install a new rom
install zip/choose your rom/flash it
reboot and enjoy : D
Click to expand...
Click to collapse
thanks bro im gonna done:highfive:
hunting_ said:
thanks bro im gonna done:highfive:
Click to expand...
Click to collapse
my pleasure: D
dabenaute said:
my pleasure: D
Click to expand...
Click to collapse
bro how can i back my 4.3 rom i have a backup my old rom
hunting_ said:
bro how can i back my 4.3 rom i have a backup my old rom
Click to expand...
Click to collapse
you can use "rom manager" :good:
Hi guyz.....
I m new here, and new in the field of Flashing,recovery and rooting. So i request you all to help me out.
Yesterday i succeeded in unlocking Bootloader.
And i installed twrp recovery in my HTC Desire HD
And installed superuser(which i think twrp did for me)
I was following guide from ""https://wiki.cyanogenmod.org/w/Install_CM_for_ace""
I wiped dalvik cache
cache
data
AND SYSTEM AS WELL(i think i messed up here)****
then i tried installing the stable cyanogen file cm-7.2.0-ace.zip (88 mb i suppose)
*************************************************************************************
AND NOW I AM GETTING ""NO OS INSTALLED. ARE You sure you wish to reboot.""
*************************************************************************************
I tried what i could.....i even factory reset it.
pls guide me, what should i do to recover. I still can enter bootloader and recovery...!
Wiping system doesn't hurt. Sounds like your partition is screwy. Flash newest twrp jrior and try and flash ROM again. But cm 7 requires an old recovery. Flash that recovery and flash a newer rom
Sent from my ATRIX HD using XDA Free mobile app
kaykay231 said:
Wiping system doesn't hurt. Sounds like your partition is screwy. Flash newest twrp jrior and try and flash ROM again. But cm 7 requires an old recovery. Flash that recovery and flash a newer rom
Sent from my ATRIX HD using XDA Free mobile app
Click to expand...
Click to collapse
flashed UNOFFICIAL Cyanogenmod 9 by PipelinerArd forum.xda-developers.com/showthread.php?t=1754382 this..... but still getting the same infinite boot screen....
pls help......pls provide me the links to download STOCK ROM FOR MY HTC DESIRE HD (ZIP file)
U CANNOT flash cm7 or cm 9with a newer recovery. Those require an old recovery. Like cwm 5-
Sent from my ATRIX HD using XDA Free mobile app
Follow this steps;
Download CWM 5.8.1.5 from Here
Flash it just the way as you've flashed TWRP. It will basically help you flash All ROMs from Gingerbread to JellyBean and upto Certain KK(4.4.2) builds.
And if you want to flash anything higher then you've to flash Latest TWRP by jrior. Now this is when you want to flash Higher Builds such as KK(4.4.3 n up) and LP(5.0.2 n up).