Hi,
I've tried yesterday to install MaximusHD, and I had some trouble.
First I've unlocked the phone, this went fast.
Second according to the manual in MaximusHD forum I flashed the Kernel, I then tried to go to recovery but I only got red exclamation.
The second problem I've got is that I lost my IMEI.
I solved the IMEI problem by flashing boot.img from the RUU of my phone.
maybe it's because I'm a noob, but please help.
Thanks,
Phone: ENDEAVOR
cid: HTC_K18
HBOOT: 1.39
OS: JB 4.1.1
Hi,
After root you need to install a custom recovery specific for the phone, search for it in xda "One X Android Dev" form.
After this you can flash the boot.img for the custom ROM and then flash via the custom recovery the ROM, when aroma installer asks do the Full Wipe,
This will wipe clean the Data, System, and may be the cache partitions so wipe the Cache partition before installing the new ROM,
Good luck
Sent from my HTC One X using XDA Premium 4 mobile app
You need a custom recovery! You can choose between TWRP or CWM. Or you have your own (but I guess not so...)
Gesendet von meinem HTC One X mit Tapatalk 4
can't install updates
Hi,
I've got an update (Wi-Fi fix) but I can't install it .
In the recovery its written that the installation is aborted .
Can anyone advise me ?
verany said:
Hi,
I've got an update (Wi-Fi fix) but I can't install it .
In the recovery its written that the installation is aborted .
Can anyone advise me ?
Click to expand...
Click to collapse
What recovery did u install?
ChiDi9901 said:
You need a custom recovery! You can choose between TWRP or CWM. Or you have your own (but I guess not so...)
Gesendet von meinem HTC One X mit Tapatalk 4
Click to expand...
Click to collapse
Or Philz Advanced.
convict_moody said:
What recovery did u install?
Click to expand...
Click to collapse
CLOCKWORK
Related
rom not active
have to install recovery 6.0.12 not?
knifpro213 said:
rom not active
have to install recovery 6.0.12 not?
Click to expand...
Click to collapse
question is confusing please describe problem? and why you want to install cwm 6.0.1.2?
crossfire77 said:
question is confusing please describe problem? and why you want to install cwm 6.0.1.2?
Click to expand...
Click to collapse
I'm using CLOCKWORKMOD 5.0.2.8
if I want to install rom should CLOCKWORKMOD some?
knifpro213 said:
I'm using CLOCKWORKMOD 5.0.2.8
if I want to install rom should CLOCKWORKMOD some?
Click to expand...
Click to collapse
if you want to install clockworkmod 6.0.2.1 just flash that file from recovery.and you can install any rom from your clockworkmod 5.0.2.8
crossfire77 said:
if you want to install clockworkmod 6.0.2.1 just flash that file from recovery.and you can install any rom from your clockworkmod 5.0.2.8
Click to expand...
Click to collapse
but me install rom is it error
did you wipe everything..
Follow steps:
Factory reset/wipe system
Wipe cache
Wipe dalvik cache
(Do twice for sure)
Then,
Install from zip
And select your rom.
It ll work.no need to flash another recovery.
If it wont,might your rom file is corrupted.
Sent from my HTC Wildfire S A510e using Tapatalk 2
crossfire77 said:
did you wipe everything..
Follow steps:
Factory reset/wipe system
Wipe cache
Wipe dalvik cache
(Do twice for sure)
Then,
Install from zip
And select your rom.
It ll work.no need to flash another recovery.
If it wont,might your rom file is corrupted.
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
I thank you much
I think the rom is corrupt
Welcome...
If you want touch recovery you can download TWRP recovery.
Its official touch recovery and supports all features.
You can download Goo manager application from play store.
And then from it you can install that.
But its optional. Cwm recovery is cool enough.
Sent from my HTC Wildfire S A510e using Tapatalk 2
crossfire77 said:
Welcome...
If you want touch recovery you can download TWRP recovery.
Its official touch recovery and supports all features.
You can download Goo manager application from play store.
And then from it you can install that.
But its optional. Cwm recovery is cool enough.
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
I also installed all the other rom and still , still fails "status 7"
knifpro213 said:
I also installed all the other rom and still , still fails "status 7"
Click to expand...
Click to collapse
do you have wildfire s 2012 model? my meaning is you purchased your phone in 2012? because if it is,you can't flash custom roms other than sense based and also only modified cwm recovery ll work. you can find it in general section.
crossfire77 said:
do you have wildfire s 2012 model? my meaning is you purchased your phone in 2012? because if it is,you can't flash custom roms other than sense based and also only modified cwm recovery ll work. you can find it in general section.
Click to expand...
Click to collapse
means that I can not up the rom?
Yeah...wfs 2012 has some problems..im not sure about it.but i read some threads they said..its not compitable with any custom roms except sense roms and you should hv install modded cwm recovery.search threads for it.
Sent from my HTC Wildfire S A510e using Tapatalk 2
hi,
im stuck in a circle of stupid mistakes
from the beginning:
my HOX was on stock ROM, but rooted.
i made the OTA to 3.18.401.1 (by using rootkeeper)
then i wanted to get back to stock without root by flashin a RUU.
there is no RUU for the 3.18.xx
the older RUUs are giving me an error 140 message
so i figured out that the only way to get back to stock now is by restoring a NAND backup
i haven't made a backup of my HOX because i already have it since few days
a kind user of this forum gave me his twrp backup of 3.18.401.1 to restore
so i flashed the twrp 2.4.3.0 to restore
but the touchscreen isnt working (same with twrp 2.4.0.0)
after reading a little on xda i now know that this is kernel related issue
i flashed the adviced kernel over CWM
flashed twrp 2.4.0.0
but touchscreen still isnt working.
:crying:
Now i dont know what to do.
im trying to fix this for 2 days now and i cant take it any longer
HOX CID HTC__102
AW: kernel, twrp and back to stock issues
Don't flash the kernel via cwm, flash it via fastboot
And the right section for this would have been Q&A
Gesendet von meinem One X mit Tapatalk 2
Flo95 said:
Don't flash the kernel via cwm, flash it via fastboot
And the right section for this would have been Q&A
Click to expand...
Click to collapse
Sorry, i thought this would be the right section...
How to flash the kernel with fastboot?
only unzip the boot.img and then fastboot flash boot boot.img ?
LaLey said:
Sorry, i thought this would be the right section...
How to flash the kernel with fastboot?
only unzip the boot.img and then fastboot flash boot boot.img ?
Click to expand...
Click to collapse
Flash cwr then twrp and no issues with touch after
Sent from my HTC One X using xda premium
matmar said:
Flash cwr then twrp and no issues with touch after
Click to expand...
Click to collapse
no, its not working. this is my problem
LaLey said:
no, its not working. this is my problem
Click to expand...
Click to collapse
Have you tried erasing cache in fastboot with fastboot erase cache. Maybe that will help
i had the wrong version of the twrp 2.4.0.0.
it has to be the openrecovery-twrp-2.4.0.0-endeavoru-JB.img
now touch is working
but how do i restore a backup?
my HTC_102-3.18.401.1 TWRP Backup.zip is on the root folder of sd.
whe i tap restore in twrp this backup is not shown...
EDIT:
ah ok, i need to create folder /twrp/backups/myIMEI/
Glad to see you got sorted
I'm on an HTC One X International, endeavoru, hboot 1.39.0000.
No KitKat roms will install. (Jelly bean ROMs install fine). In TWRP I get something about an error updater binary. In CWM I get status 7 error.
I've tried the latest versions of both TWRP and CWM, and I've tried the modified versions I've seen posted around here. Nothing works. Also tried re-unlocking my bootloader.
Try latest philz recovery..
Normally the latest twrp test img on one of the last few pages should work..
Also which KK Rom do you tried to flash?
Gesendet von meinem HTC One X mit Tapatalk
One-X-master said:
Try latest philz recovery..
Normally the latest twrp test img on one of the last few pages should work..
Also which KK Rom do you tried to flash?
Gesendet von meinem HTC One X mit Tapatalk
Click to expand...
Click to collapse
I'm trying to flash: aicp_endeavoru_kitkat-3.5-RELEASE-20140309
Just tried the latest philz recovery (philz_touch_6.19.3-endeavoru.zip), didn't work either.
Where can I find the latest twrp test img? Is this related to philz recovery?
samnoon said:
I'm trying to flash: aicp_endeavoru_kitkat-3.5-RELEASE-20140309
Just tried the latest philz recovery (philz_touch_6.19.3-endeavoru.zip), didn't work either.
Where can I find the latest twrp test img? Is this related to philz recovery?
Click to expand...
Click to collapse
Can you try to get a recovery log? You can save it through advanced or so...then upload it here so I can take a ook inside.. normally it should work fine...but I think that if even on those recoveries your zip file is broken...try to redownload it...
And no twrp is not related to philz...you should know that twrp has its own thread ...and I said it's somewhere on the last few pages...if even that doesn't work it's 100% a broken zip file!
Gesendet von meinem HTC One X mit Tapatalk
Sorry about that, read your post wrong and thought phil was making a mod of twrp .
Tried to flash the lastest twrp-recovery2 test from that thread with WinDroid Toolkit, it doesn't seem to work, phil's CWM is still installed.
Also tried flashing BeanStalk-4.4.255-20140315-endeavoru, always the same error as with AICP.
Checked md5s, doesn't seem like a download error.
I'm stumped
Recovery file is here, ignore the bit at the end where I clicked 'show log' for some reason...
https://dl.dropboxusercontent.com/u/9043933/recovery.log
Ok, I figured out what's going on here. I have found a recovery file that I need for this ROM, but even though Windroid keeps saying it's been flashed, it's not actually happening. This is the recovery file: recovery-6.0.4.5-endeavoru.img http://d-h.st/Ugy
edit: solved by using a different tool to install recovery. thanks for your help!
Hello,
i am new in this Forum an i have a Problem, maybe somone can help me.
I habe the new HTC One M8. I wanted to debrand it, so i unlocked the bootloader and loaded philz touch 6 on it. Super SU was also installed. Then i tried the S-OFF variant with Firewater. Firewater said that in Moment ist not possible to use it on my device. So i decided to remove Root.
Super SU was erased, then i went into philz touch and made a factory reset including Cache/dalvik Cache erasing.
Philz Touch asked me before rebooting if i will install a new Rom. I said yes. I think it was the wrong decision.
From now on i can Access Philz touch, but the phone will not start up it stucks on the htc Logo.
Please can somebody help me?
Thank you
You did the factory reset but didn't flashed another Rom or nandroid backup afterwards? a big LOL ...if you do that factory reset in recovery you won't have any rom on it so don't wonder about that if you can't boot the device xD
Gesendet von meinem HTC One_M8 mit Tapatalk
Ok, so it´s my fault, but can you tell me how i can fix that? I think i will Need the stock Rom?
Restore a nandroid if you made one or go to this thread. http://forum.xda-developers.com/showthread.php?t=2701376 and download one that matches your cid.
Thanks, but i cannot find this cid x.xx.112.x - T-Mobile AT (Austria), hope somobedy will be able to upload it.
In that time I would advise to use a custom Rom if you don't care atm about updates from HTC especially if there is nothing special to update like hboot etc and all custom roms are based in latest update
Gesendet von meinem HTC One_M8 mit Tapatalk
One-M8-Master said:
In that time I would advise to use a custom Rom if you don't care atm about updates from HTC especially if there is nothing special to update like hboot etc and all custom roms are based in latest update
Gesendet von meinem HTC One_M8 mit Tapatalk
Click to expand...
Click to collapse
i have the same problem as op but my question is can we use a custom rom if the device is s-off?
After several trys to install viperonem8 i just got a successfull Flash. But now, the phone only boots into recovery mode itself, how can i make it to start up with viperonem8? i used twrp to Flash. Everytime i say reboot System, ist starts up into fastboot!!
Joelz37 said:
i have the same problem as op but my question is can we use a custom rom if the device is s-off?
Click to expand...
Click to collapse
Öhm especially with s-off it should work lol
Huliman said:
After several trys to install viperonem8 i just got a successfull Flash. But now, the phone only boots into recovery mode itself, how can i make it to start up with viperonem8? i used twrp to Flash. Everytime i say reboot System, ist starts up into fastboot!!
Click to expand...
Click to collapse
Recovery wipe cache and dalvik cache and fastboot erase cache...should help
Gesendet von meinem HTC One_M8 mit Tapatalk
have the same problem as OP does , stuck on the HTC boost logo , the a custom rom (viper and revolution HD) on my SD card but when trying to flash either one it just reboot into recovery right after few secs in the install.
Any idea`s?
Device is : M8 Verizon (S-off)
Thanks
edit : in the TWRP i allways get the msg : E: unable to mount /sysem.
My HTC ONE M8 is running again, What solved my Problem? i have unpacked the viperOneM8 zip and flashed the boot.img afterwards. Now it works like it should. Now i am gonna look for the stock Rom to unroot it and restore to stock.
Oooo.. Same as hox?? S-on requires manual flashing of the kerner it seems???
Sent from my HTC One_M8 using xda app-developers app
The only Thing what is not working is LTE. i can enter the LTE Network but i have no Internet Connection, cannot make calls or send/receive sms.
Cdma or gsm phone?
Sent from my HTC One_M8 using xda app-developers app
Network mode is now set on GSM/WCDMA/UMTS, if i Change it to LTE/CDMA the LTE Icon appears in the Status bar, but no Connection.
Huliman said:
My HTC ONE M8 is running again, What solved my Problem? i have unpacked the viperOneM8 zip and flashed the boot.img afterwards. Now it works like it should. Now i am gonna look for the stock Rom to unroot it and restore to stock.
Click to expand...
Click to collapse
could you please explain what exactly did u do ?
how did u extract it and what u dont with it ? flash it from recovery or what ?
a small step by step guide would be great.
thanks !
chundrik said:
could you please explain what exactly did u do ?
how did u extract it and what u dont with it ? flash it from recovery or what ?
a small step by step guide would be great.
thanks !
Click to expand...
Click to collapse
after flashing the rom. extract the boot.img from the rom zip file. Put it in your fastboot/adb folder.
then do:
fastboot flash boot boot.img
exad said:
after flashing the rom. extract the boot.img from the rom zip file. Put it in your fastboot/adb folder.
then do:
fastboot flash boot boot.img
Click to expand...
Click to collapse
yea but iam failing on flashing the rom in the first place...
chundrik said:
yea but iam failing on flashing the rom in the first place...
Click to expand...
Click to collapse
I know ^_^ That's why you should stick to the thread I am already helping you in and not hijack others that seem like they are the same issue when they're not
I Tool the Rom, Put it on a 2gb SD card, went into recovery, and hit install zip, choosed the rom and installed it. Then i have extracted the boot img and flashed it with fastboot
Sent from my 831C using XDA Free mobile app
I have a HTC One X with stock Jelly Bean 4.2.2 and I am rooted. My only root apps are SuperSU, adaway, obackup, luckypatcher and titanium backup. I didn't modify any other things like framework or something. I didn't flash anything. Now the phone tells me about this bug fix update. I know I need stock recovery to flash it. So can I simply flash stock recovery then make the update and flash back cwm recovery again?
Gesendet von meinem Nexus 7 mit Tapatalk
As long as your bootloader is unlocked, you can switch between recoverys whenever you want :good: So answer to your question is yes, you can flash stock recovery then make the update and flash back cwm recovery again.
ChiDi9901 said:
I have a HTC One X with stock Jelly Bean 4.2.2 and I am rooted. My only root apps are SuperSU, adaway, obackup, luckypatcher and titanium backup. I didn't modify any other things like framework or something. I didn't flash anything. Now the phone tells me about this bug fix update. I know I need stock recovery to flash it. So can I simply flash stock recovery then make the update and flash back cwm recovery again?
Gesendet von meinem Nexus 7 mit Tapatalk
Click to expand...
Click to collapse
You don't necessarily need stock recovery. You can press and hold the vol down and power button to boot into bootloader, select recovery, select install from zip file and in there selected the update zip file (it is stored in downloads folder). I am not sure about other OTA updates but this one installed correctly on my rooted HOX.
D0GuKaN said:
As long as your bootloader is unlocked, you can switch between recoverys whenever you want :good: So answer to your question is yes, you can flash stock recovery then make the update and flash back cwm recovery again.
Click to expand...
Click to collapse
xaffer said:
You don't necessarily need stock recovery. You can press and hold the vol down and power button to boot into bootloader, select recovery, select install from zip file and in there selected the update zip file (it is stored in downloads folder). I am not sure about other OTA updates but this one installed correctly on my rooted HOX.
Click to expand...
Click to collapse
Thank you both for straightforward answers!?
Gesendet von meinem Nexus 7 mit Tapatalk