Related
Haven't got enough posts to publish in the dev part of the forum and I can't find anyone with a DHD and this problem.
I'm on mike1986' Android Revolution HD 2.0.7 with senseless and trying to upgrade to 2.0.8 - with senseless.
I can't boot into ClockworkMod Recovery through Rom Manager or the boot menu (vol down at boot). Running 2.5.1.3 and it just hangs on the HTC screen. Tried flashing it twice from Rom Manager - no joy.
Looking for any advice - the rest of the phone runs fine btw.
Sent from my Desire HD using XDA App
Try to use the LASTEST version of CWM. i had this issues before coz i'm using the old version that i got from torrent. after i installed/ overwrite the old one, it works like charm! gud luck!
Cheers for the help, one question tho. As far as I am aware the latest CWM is 2.5.1.3. should I try using the "flash an older CWM" in Rom Manager?
All done, a massive thanks dude for the help.
Jambolia said:
Cheers for the help, one question tho. As far as I am aware the latest CWM is 2.5.1.3. should I try using the "flash an older CWM" in Rom Manager?
Click to expand...
Click to collapse
Well, this is what you need to check before u want it to works..
1. Firstly, NOT to update your phone with latest firmware that is 17.2/17.5 (this will not work for ALL attempt)
2. Root your phone - apps needed (superuser & VISIONary+)
3. ROM Manager (get the latest one and granted as superuser) with the right Flash CWM Recovery.
4. S-OFF (check on the pinned DHD Android development thread)
i think that's all.. other might add in some info if i got myself less on it.. thank you
I'd try flashing an older recovery and flashing back to the newest. Remember you can also get to recovery by switching off and charging.
Sent from my HTC Desire HD using XDA App
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
pranjaldixit said:
Guys today I tried installing MIUI v4. I followed all the steps mentioned in the thread. I installed everything properly but my phone is stuck onthe android logo. This happened when I rebooted my phone after installing MIUI. So please tell me what is the problem. Also when I am truing to restore some type of error is cropping up. Please help.
Click to expand...
Click to collapse
Before installing make backup wipe dalvik cache , cache, do factory reset and try again .. hope it helps
Sent from my Hero using xda premium
Actually I tell the whole story now. When I was making backup of my stock ROM the sd card showed low on space. So I removed that SD card and inserted the one which came with the Phone. On that I installed all the required zip files. Then I made backup of the stock ROM and the data. After that I followed these steps mentioned here -:
http://forum.xda-developers.com/showthread.php?t=1863260
According to the steps I did not did wipe davik cache etc. after instaling the ROM I did wipe factory and data reset and wipe cache partition. After following all the steps mentioned I rebooted my phone as mentioned. But after rebooting the phone is stuck on android logo. I then again went into recovery and tried to wipe dalvik cache the confirmation page that appears before wiping anything is not coming. Also when I tried to restore my phone to the stock ROM an error message is coming. So I am not able to restore to the stock ROM. This is the whole thing. So guys please help. I hope I have not bricked my phone. Any solutions?
Thanks
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
As long as your phone can go to recovery mode it wasnt bricked..
May i know what recovery that you use to install the rom??
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Mate I used latest version of ClockWork Mod to install the ROM.
pranjaldixit said:
Mate I used latest version of ClockWork Mod to install the ROM.
Click to expand...
Click to collapse
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
What version it is??
If you are install custom rom from stock rom,its better to use px-cwmV2..
If test it,and it minimize the risk of stuck on android logo..
After that you can change the recovery to other version that you want..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
pranjaldixit said:
I think the version is 5.0.2.7. Also when I am switching off the phone after sometime it is automatically switching on by itself. So for the time being I have removed the battery.
Click to expand...
Click to collapse
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
AiphNday said:
If you use that version,use the version that can support rfs+ext4 file system..
Stock rom use rfs file system and custom rom usually use ext4 file system,so therefore you have to use recovery that support both..
Sent from my GT-S5660 using Tapatalk 2
Click to expand...
Click to collapse
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
pranjaldixit said:
Could you please tell me how to proceed? Because the backup of stock ROM is showing problems.
Click to expand...
Click to collapse
I suggest that you flash your phone to stock rom again via odin..
Then change your recovery,i was preffered px-cwmV2,but i dont know is the link still alive or not..
Flash the recovery,reboot..
Then enter recovery mode again,install rom..
Sent from my GT-S5660 using Tapatalk 2
How to do flash stock ROM as the backup that I made is not working properly.
pranjaldixit said:
How to do flash stock ROM as the backup that I made is not working properly.
Click to expand...
Click to collapse
With odin,
Search ! there are allot of guide howto flash gio to stock with odin
Sent from my HTC Hero using xda app-developers app
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
phreak_or said:
If you have working recovery it's no use to flash stock ROM, just flash px-cwmV2 http://www.mediafire.com/file/y1xy6g2y5tpp1fg/px-cwm-v2.zip.
Then wipe all, including dalvik, flash desired ROM, wipe all again (including dalvik), and you should be good to go.
Click to expand...
Click to collapse
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
pranjaldixit said:
I hope you must have read my post about the problem. I have clockwork 5.0.2.7. The backup I made is alao showing some error when I tried to restore it using CWM. So please guide how to proceed.
Click to expand...
Click to collapse
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
phreak_or said:
I have. As i said, you could just try CWM v2.
BUT to be absolutely safe flash a stock ROM using Odin, see http://forum.xda-developers.com/showpost.php?p=20397915&postcount=3.
After u flash the stock ROM, go to default recovery, factory reset, boot the rom, shutdown.
Flash the desired version of CWM using Odin or trough recovery, and then flash the custom ROM u want.
For me CWM 5.0.2.7 ext4+ RFS couldn't wipe dalvik, nor could it mount /system. So I used cwmV2.
Good luck!
Click to expand...
Click to collapse
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
pranjaldixit said:
Thanks a lot. So first I have to download firmware and then using odin flash it on my phone. After that I have to install clockworkmod v2 amd then install the MIUI ROM? Can the CWM be flashed through recovery?
Thanks
Click to expand...
Click to collapse
yes
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
pranjaldixit said:
And please tell me how to install CWM v2 as I already have version 5.0.2.7 of clockwork mod installed in my phone? Pease let me know the procedure for the same.
Thanks
Click to expand...
Click to collapse
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
voetbalremco said:
when you flash firmware with odin, it will also flash a new recovery.
just enter recovery like normally, and flash cwm-v2.zip
after its done you pull the battery out, and boot into recovery again.
now you have clockworkmod installed
Click to expand...
Click to collapse
I am not installing firmware right now. I am just wanting to install CWM v2 and try whether it is able to install MIUI successfully or not. If this one also fails then I will install the firmwares via odin. Hope you ate able to understand what I am saying. Please help.
Full wipe is obligatory
Installing Kernel via Kernel flasher is obligatory, otherwise your device won’t boot!
^^^
^^
^
in rom installation details written like this >>
THE QUESTION HERE !! FLASHING THE BOOT.IMG FOR ROM VIA CMD IS NOT ENOUGH ????
I haven't tried yet but I think the kernel flasher also flashes modules which may not be present in the Rom
Sent from my ViperX
command for boot.img work fine
Is available a FAQ post about MaximusHD 20 at this link
About it you must flash the given boot.img in the kernel flasher and perform a full wipe. Other kernels don't working on it. TWRP 2.6 is recommended because with other recoveries you may be stuck on 0% or 8% during the installation.
All is totally working with no bugs, if you have one you should retry a celan flash.
Good luck and enjoy :laugh:
frezd91 said:
Is available a FAQ post about MaximusHD 20 at this link
About it you must flash the given boot.img in the kernel flasher and perform a full wipe. Other kernels don't working on it. TWRP 2.6 is recommended because with other recoveries you may be stuck on 0% or 8% during the installation.
All is totally working with no bugs, if you have one you should retry a celan flash.
Good luck and enjoy :laugh:
Click to expand...
Click to collapse
Works fine with twrp 2.4, for some reason twrp 2.6 won't respond to touch on my hox
Sent from my HTC One X using xda premium
Whoareyou said:
Works fine with twrp 2.4, for some reason twrp 2.6 won't respond to touch on my hox
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Which version of hotboot do you have? Have you clean dalvik via fastboot after flashing?
Whoareyou said:
Works fine with twrp 2.4, for some reason twrp 2.6 won't respond to touch on my hox
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thats because you updated the phone to at least 3.17 software or higher (updated touch drivers !)
Indeed use twrp (repacked) or philz. Btw flashed it with philz myself, no issues
Sent from my HTC One X using XDA Premium 4 mobile app
@Mr Hofs
is clockwork recovery fine for installing this rom ?
or do u recommend philz recovery ??
If yes then how do i change from cwm to philz ?
Philz has a zip file whereas cwm is .img file
I installed cwm through cmdpromt
But how do i install philz through cmd ?
ronu said:
@Mr Hofs
is clockwork recovery fine for installing this rom ?
or do u recommend philz recovery ??
If yes then how do i change from cwm to philz ?
Philz has a zip file whereas cwm is .img file
I installed cwm through cmdpromt
But how do i install philz through cmd ?
Click to expand...
Click to collapse
hey mate,
1. +2. All recoverys should work. TWRP 2.6 is recommand. Some Philz users reported issues (stuck @ 0%, bootloop etc.).
3. Just flash it via fastboot.
4. Unzip it and you will find a .img file
5. fastboot flash recovery recovery.img
fastboot erase cache
ryman95 said:
hey mate,
1. +2. All recoverys should work. TWRP 2.6 is recommand. Some Philz users reported issues (stuck @ 0%, bootloop etc.).
3. Just flash it via fastboot.
4. Unzip it and you will find a .img file
5. fastboot flash recovery recovery.img
fastboot erase cache
Click to expand...
Click to collapse
Thanks i will try this ! :good:
Guys official OTA is available in many countries. The new base is 4.18.401.2 but the Maximus is on 4.18.401.1. Also the hotboot is updated to 1.72.
I hope in a OTA update of Maxiums and not in another clean flash
I won't recommend any recovery. But philz has a fully functional one. Twrp is a good recovery but in the repacked version adb and ums does not work. And in philz it all does work. I use philz and flashed the sense 5 rom with succes. Just sharing my experience
Sent from my HTC One X using XDA Premium 4 mobile app
And as for the kernel, flashing it via fastboot is fine. the kernel flasher is a simple batch file to simplify things, but it doesn't appear to fastboot erase cache, so imo it is better to flash the boot image manually. I did and it's working flawlessly
MaximusHD 21 with base 4.18.401.2 is available, but on OTA you find the full rom, so 700MB.
I don't know if in the kernel flasher provided by football there is the wipe cache script, maybe the missing wipe can cause wifi issue.
frezd91 said:
MaximusHD 21 with base 4.18.401.2 is available, but on OTA you find the full rom, so 700MB.
I don't know if in the kernel flasher provided by football there is the wipe cache script, maybe the missing wipe can cause wifi issue.
Click to expand...
Click to collapse
kernel flasher only flash boot.img, no wipe of any kind.
wackywonderkid said:
kernel flasher only flash boot.img, no wipe of any kind.
Click to expand...
Click to collapse
An alternative is instead of rebooting your device from fastboot is to go back to hboot, load into recovery and manually wipe cache partition.
Tigerlight said:
An alternative is instead of rebooting your device from fastboot is to go back to hboot, load into recovery and manually wipe cache partition.
Click to expand...
Click to collapse
In any case if you select full wipe while installing the rom in the log you can read wiping cache so theoretically no problem. But a dev daid to me that is safer clean from fastboot
ar3na2012 said:
command for boot.img work fine
Click to expand...
Click to collapse
Yep, Flashing using cmd and erasing cache is working just fine.
See whats inside "Flash kernel.bat": nothing special but standard "fastboot flash boot boot.img"
Hello all,
Please can someone help me??
I have a HTC One X, I have unlocked my phone on HTCDev, it is showing as rooted (not broken lol) and i can add superuser on there.
I have CWM installed v.5.8.4.0 however, when looking in the ROM Manager, trying to update it is shows me 6.0.4.7 under recovery setup. but when i boot into recovery it still shows me 5.8.4.0??
I have been trying to install the Beanstalk-4.4.240-20140206-endeavouru.zip...
I keep getting stuck in the installation with the message status 7 and then installation stops..
I have cleared all the files and cache that is required prior and still fails. I have tried removing the assert / getpro lines and I still get status 7 during installation.
I have tried a few different ROMs all telling me they are for HTC One X (so i am guessing these just are the right ROMs)
The only think i can see i have is that i have S-On, but i cannot seem to find anywhere to turn this off.. Is this the only reason it is not working????
I have tried another recovery images as well and still no luck?? (unless i did that wrong)
Please can someone help me, I would really like to put a Kitkat ROM on my phone as HTC are not going to get this done..
Ditch rommanager, it does not work on a s-on hox. Second you need to flash a kitkat recovery to install kitkat roms and a sense recovery to install sense 5 roms or earlier build aosp roms.
So for kitkat download the latest philz touch recovery available, and if you want sense based roms i suggest to use philz touch 5.15......
You have to flash boot.img & recoverys via fastboot (pc) to the phone !
Mr Hofs said:
Ditch rommanager, it does not work on a s-on hox. Second you need to flash a kitkat recovery to install kitkat roms and a sense recovery to install sense 5 roms or earlier build aosp roms.
So for kitkat download the latest philz touch recovery available, and if you want sense based roms i suggest to use philz touch 5.15......
You have to flash boot.img & recoverys via fastboot (pc) to the phone !
Click to expand...
Click to collapse
Thank you , do you by any chance know where i can get these files? sorry for asking, been at this all day and not getting anywhere :crying:
I think this thread explains it pretty well
http://forum.xda-developers.com/showthread.php?t=1605720
Mr Hofs said:
I think this thread explains it pretty well
http://forum.xda-developers.com/showthread.php?t=1605720
Click to expand...
Click to collapse
Thank you i have checked this out.. but i can only find the Philz touch 6.19.3 clockworkmod 6.0.4 so i have updated
Just a slight issue now where i am cleaning all what has to be cleared and then installing the ROM and GAPP which both are now installing by the look of it and no errors.. but i am looping back into Philz touch rather than the phone restarting.. Even if i restore the previous version it still comes back to Philz touch..
do you know why this is happening? I tried CM11 Rom and also the Beanstalk 4.4 ROM (As well as restore) all coming back to recovery mode.. Im lost now
Try this recovery and flash a sense 5 rom to check if that works. It should not boot back.to the recovery.
https://www.dropbox.com/s/yqzlpqo8illa53j/Philz recovery 5.15.9.img
And can you post the outcome of :
Fastboot getvar all
And delete the imei and serial number before posting it !!
ok the 5.15 installed fine, but the images here are giving me status 7 and restore is not working for me from here either
i have attached the getvar all outcome
The specs are fine, download a sense 5 rom like viper X or arhd. And install it like this :
Flash the boot.img of the rom !
Then enter the recovery and make a FULL wipe :
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts and storage - format cache , data and system
Then install the rom (if you go for viper you select cache wipe only and full rom install in the aroma)
ok I realised i didn't do the boot.img correctly.. i tried it again now but went back to Touch 6 and the Beanstalk has installed YAY!! :laugh:
You said "download a sense 5 rom like viper X or arhd" are these better than Beanstalk? I am asking as this is my first 4.4 ROM i have installed...?
I do have to say i do like the sense 5 so wondering if it is worth changing ROM to what you are suggesting?
Otherwise it is now working... Thank you heaps for all your help
Ah no there is no "better" rom. I suggested these because i have experience with these roms. Just for testing purposes.
But all is fine. And you know how to flash so all good.
CASE CLOSED !
Hello, I was trying to get CyanogenMod 7.1 on my HTC Desire Z (from Bell), and used this XDA guide to attempt to downgrade first. However the method used to gain temp root did not work. So I switched to this official CyanogenMod Guide. After I got the device downgraded with their guide, I then rooted and got ClockworkMod Recovery working. Lastly, I attempted to use the CM Recovery to install the official 7.2 mod for my device. It installed, but when I boot the phone normally, the loading screen of CM 7.1 just continually loops, and does not actually start. I also tried to install the 7.2 for the device, but got the same result. My end goal is to get the device running 4.4 (or some OS more current than 2.2) using Andromadus Flinny CM11.
Additional info: HBoot-0.84.2000, S-OFF, Radio-26.03.02.18_M3 and CW Recovery v3.0.2.4. (Still running 2.2, build # 1.34.707.3) I did search through the forums for posts pertaining to my problem, but I didn't see any. Does anybody know what I'm doing wrong, or have any suggestions? Thanks, AndyFactor.
Try doing a full wipe in recovery than flash again the ROM then gapps, reboot
If this doesn't work let me know
Sent from my Nexus 7 using XDA Premium 4 mobile app