Hi,
the USB port of my GN does not work for data.
If I connect it to the charges, it's getting charged as usual.
But if I connect the phone to my PC (Win8 or Linux) it doesn't work. Only the charging function works.
The PC tries to install the drivers for a new USB device but after a short time it says that it couldn't be installed.
Anyone who knows a solution?
Since you mentioned this I went ahead and tried my Rooted GNex on PC and Mac. It worked fine on PC but MAC is not finding my phone.
Sent from my Galaxy Nexus using xda app-developers app
Related
can somebody help me. I cant get my drivers to recognize my device. Ive installed the driver i needed. Ive restarted my pc and uninstalled and reinstalled the driver.
If you using the stock cable, this may be the issue. A blackberry usb cable works great. You should also try a different usb port on the computer. What os are you running?
Sent from my SPH-D700 using XDA App
I got mine to work by letting Windows Update find and install the drivers. I turned on USB Debugging, conneceted the cable, clicked to connect on the phone, then went into Device Manager in the Control Panel and found Samsung Android under USB and clicked it, then said update drivers and chose from Windows Update. Took like a half hour to get them all.
On my pc I'm using windows vista. I uninstalled driver and restarded my pc and phone and plugged in an HTC cable and installed the driver and it worked. I left debug mode on during that process. Should I have turned it off. Anyways I turn phone off to go into download mode and it doesnt recognize the device. Wth! It says to update and look for update but there isnt and doesnt work. Then I unplug cable and plug cable back in after I rebooted and I get the did not recognize error.
Sent from my SPH-D700 using XDA App
I have been using cables from Amazon basics, no cable issues at all. They even warranty the cable for a year.
Vista is a tough os to get the drivers working just right. If u have access to a win7 or xp x86 comp, you might have better luck. I never could get my win7 x64 working but np on win7 x86. Go figure...
Sent from my SPH-D700 using XDA App
if u have other usb device connected, take them out and connect only epic and see. i use stock usb cable and works great for me. and try usb port from the back of computer which is actually sit on motherboar.
good luck
Sent from my SPH-D700 using Tapatalk
I plugged my phone into my computer today, and noticed that my USB debugging didn't come up on my phone. I'm not sure what happened, I can't figure it out. My computer doesn't recognize my phone and my phone doesn't start running USB debugging. Its checked on my phone but maybe my drivers are screwed up somehow. Anyone got any tips?
Sent from my Galaxy Nexus using xda premium
usb connection to computer
What is it that you are trying to do? If all you want is to see the phone from windows and transfer files, you want debugging off. USB debugging is for using adb commands, or tools that use them, like for rooting.
If you are sure that it is not software problem with your PC (it worked some time ago, you didn't change anything, etc.), than try to clean USB port with soft tooth brush. The USB can have some problems due to oxidation.
I'm trying to go from AOKP 31 to something newer. But my computer used to show me my phone but now it doesn't do anything.
Sent from my Galaxy Nexus using xda premium
Just upgraded from an S2 to an S3 and am having an issue with getting my S3 to connect to my PC that I previously had S2 drivers on.
I am having an issue however that I cant seem to figure out. When I connect my phone to my PC via USB cable it detects my phone for a few seconds, then trys to install drivers and then the connection disconnects and reconnects a few times a second. To the point where my PC is beeping all the time because it is recognizing a new device and on the notification tab on my S3, connected to PC flashes off an on. I have tried reinstalling drivers, booting the phone already plugged into pc, switching to camera mode, turning the pc and phone both off and starting together and none of these things help.
I did some searching and it appears that a few others have experienced this when upgrading from a different Samsung device, however even after going to device mgr and uninstalling those drivers I still have the same issues. I dont know if there are some drivers that are not displayed or something. I have tried a different cable with no avail. However when I connect my phone to a new PC that has never had a samsung device installed before it works with zero issues. Someone recommended using the Naked Drivers however I cant even get to the point to pick which driver to use before the device starts disconnecting and reconnecting on my PC several times a second.
Has anyone else experienced this? Thanks.
-Sayajin
Hmm, try this. Dial ##3424#, tap on PDA, then Qualcomm USB Setting, tap on MTP+ADB, ok. See what happens now.
I'd swap out the USB cable and try a different port, if still not working then install Kies and let it run the connection diagnostics which has resolved this issue for me in the past.
Sent from my SPH-L710 using xda app-developers app
Well I was going to root my girlfriends phone today, but I cant. Now before you tell me to use a search button, listen.
I tried looking. I've tried every solution I found. Here's what's going on.
I downloaded kies, then connected phone, phone started charging but no detection on windows. I tried a different cable, still nothing.. Uninstalled kies, restarted phone and computer, reinstalled kies and hooked the phone back up. Same deal, charge only but no detection on windows
So I tried another computer, different cable again. Same problem. Charge only, but no detection on windows. I looked at the charging port, no bent, discolored pins. It will charge on an ac charger as well. I have tried everything I know, it won't even detect Odin mode.
Any suggestions?
Sent from my SPH-L710 using xda app-developers app
I think you forgot to install the drivers on computer then it would recognize phone search for guide to root epic 4g touch on xda and Google and check out qbking77 on YouTube links are probably in one of his videos .
Sent from my SPH-D710 using xda app-developers app
usb
try turning on usb debugging mode in settings / security it should install adb files to your comp what operating system are u running?
When I plug in my Galaxy S3 with Android 4.3 into a USB port, nothing happens whatsoever. My PC doesnt detect anything at all... yet the USB ports are working. It is using Windows 8.1
Yet when I plug it into my netbook with Windows 7, everything works fine. The phone is detected and everything.
What could be causing this? MTP? How do I fix the issue?
Works fine on my 8.1. Did you try reinstalling kies.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ericerickson592 said:
Works fine on my 8.1. Did you try reinstalling kies.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I tried, nothing happens. =(
I am having a very similar issue, though I am using a Sprint SPH-L710.
My PC seems to detect the device sporadically. It will, rarely, show in Device Manager, in 'This PC'->'Devices and drives', adb devices, and on Kies 3 for a second, and then disappear again. Never long enough for any file transfer, and most of the time not at all.
I have tried updating all ADB, USB and chipset drivers, I have factory reset my phone, turned off the Windows 8.1 power management options that can disable a USB port, reinstalled Kies, and more, but no luck.