I plugged my phone into my computer today, and noticed that my USB debugging didn't come up on my phone. I'm not sure what happened, I can't figure it out. My computer doesn't recognize my phone and my phone doesn't start running USB debugging. Its checked on my phone but maybe my drivers are screwed up somehow. Anyone got any tips?
Sent from my Galaxy Nexus using xda premium
usb connection to computer
What is it that you are trying to do? If all you want is to see the phone from windows and transfer files, you want debugging off. USB debugging is for using adb commands, or tools that use them, like for rooting.
If you are sure that it is not software problem with your PC (it worked some time ago, you didn't change anything, etc.), than try to clean USB port with soft tooth brush. The USB can have some problems due to oxidation.
I'm trying to go from AOKP 31 to something newer. But my computer used to show me my phone but now it doesn't do anything.
Sent from my Galaxy Nexus using xda premium
Related
When I connect my phone to my pc it will charge, but nothing else. No connecting sound or notification on either the phone or pc. What's strange is it was working just days ago. Anyone have an idea?
What of are you running and did you enable debugging
Sent from my PC36100 using XDA App
and have you flashed anything lately
Sent from my PC36100 using XDA App
The last rom I flashed was the rc version of cm6 and I had no problems for a few days afterward. And yes debugging is enabled
Wow, did you try a different USB port on the PC? Also did you tried connecting the ph to a different pc? My guess is may be the Rom but try a different USB port and pc first to confirm that...
If you are using the piece of crap USB cable that came with the phone, try a different cable. Seriously.
When I put my phone conected to the comp via usb cable it charges but debugging and disk drive do not show up my husband has the same phone when he conects everything pops open using same usb cable my debugging is on and the.conects to pc is set to disk drive and always ask is checked. Any Idea what I can do to fix it I did factory reset still not working HEEEEEELP....
Sent from my PC36100 using XDA App
So when you plug it in, nothing happens except charging right? Do you have USB debug enabled? Are you trying to connect to the same PC as he has used? Are you trying to access ADB? Or use HTC sync?
Your post was a little hard to read.
My debugging is on same comp usb cable as him I want to go onto my sd card but all that happens is charge sometimes my debugging turns on but nothing but charge
Sent from my PC36100 using XDA App
can somebody help me. I cant get my drivers to recognize my device. Ive installed the driver i needed. Ive restarted my pc and uninstalled and reinstalled the driver.
If you using the stock cable, this may be the issue. A blackberry usb cable works great. You should also try a different usb port on the computer. What os are you running?
Sent from my SPH-D700 using XDA App
I got mine to work by letting Windows Update find and install the drivers. I turned on USB Debugging, conneceted the cable, clicked to connect on the phone, then went into Device Manager in the Control Panel and found Samsung Android under USB and clicked it, then said update drivers and chose from Windows Update. Took like a half hour to get them all.
On my pc I'm using windows vista. I uninstalled driver and restarded my pc and phone and plugged in an HTC cable and installed the driver and it worked. I left debug mode on during that process. Should I have turned it off. Anyways I turn phone off to go into download mode and it doesnt recognize the device. Wth! It says to update and look for update but there isnt and doesnt work. Then I unplug cable and plug cable back in after I rebooted and I get the did not recognize error.
Sent from my SPH-D700 using XDA App
I have been using cables from Amazon basics, no cable issues at all. They even warranty the cable for a year.
Vista is a tough os to get the drivers working just right. If u have access to a win7 or xp x86 comp, you might have better luck. I never could get my win7 x64 working but np on win7 x86. Go figure...
Sent from my SPH-D700 using XDA App
if u have other usb device connected, take them out and connect only epic and see. i use stock usb cable and works great for me. and try usb port from the back of computer which is actually sit on motherboar.
good luck
Sent from my SPH-D700 using Tapatalk
I just bought a galaxy s2 running stock gb on ebay and whenever I plug it in any pc it only charges. There is no usb notification nor does computer play a sound when the phone is connected. The phone makes a sound and just charges no matter what I do, I have tried usb debugging on/off and nothing. When I go into wifi/connection settings and select usb mode it says to connect a cable when the usb cable is already connected. I have tried many usb cables including the original samsung one.
Did I just buy a defective phone or am I missing something?
You need the drivers, either Google it or wait for someone to post a link, your call.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
http://bit.ly/QOTfdW
Try all usb ports as well! Even without the drivers you should still be able to use it as mass storage device
Sent from my SGH-T989 using xda premium
Are you using the right cable?
OneOneSix said:
I just bought a galaxy s2 running stock gb on ebay and whenever I plug it in any pc it only charges. There is no usb notification nor does computer play a sound when the phone is connected. The phone makes a sound and just charges no matter what I do, I have tried usb debugging on/off and nothing. When I go into wifi/connection settings and select usb mode it says to connect a cable when the usb cable is already connected. I have tried many usb cables including the original samsung one.
Did I just buy a defective phone or am I missing something?
Click to expand...
Click to collapse
Are you using a data cable and not just a regular charging cable? You still see the option to connect mount the SD card evn without the drivers.
OneOneSix said:
I just bought a galaxy s2 running stock gb on ebay and whenever I plug it in any pc it only charges. There is no usb notification nor does computer play a sound when the phone is connected. The phone makes a sound and just charges no matter what I do, I have tried usb debugging on/off and nothing. When I go into wifi/connection settings and select usb mode it says to connect a cable when the usb cable is already connected. I have tried many usb cables including the original samsung one.
Did I just buy a defective phone or am I missing something?
Click to expand...
Click to collapse
I'm not sure if this works on stock gb buy try going to settings/storage. Then press menu and if another settings option comes up then go there and see if there is an option to mount as mass storage device
Sent from my SGH-T989 using xda premium
Having the same issue, can it be that I am using a backed up ROM? I know that there are times when having a backed up ROM changes your system to R/O instead of R/W
---------- Post added at 06:12 PM ---------- Previous post was at 06:09 PM ----------
MY PC basically does three quick beeps, like the ones it would make when connecting to the phone.... the only difference is when properly connected it would make one beep. I have 6 USB ports and have used all of them. In Root Explorer it states "Cannot detect SD card" that happened after i clicked on SD card to see what files were there.
I did a fresh flash of a ROM and now I am not having issues connecting to PC.
similar problem
I have the same problem of my gs2 not connecting to the computer. The only difference is that it isn't new, and I've been connecting to the computer using the exact same cord for a while.
I'm not really sure what the problem could be, it was working fine as recently as yesterday
Had the same issue I had to send it in for repairs USB port on the phone was effed up
Sent from my SAMSUNG-SGH-T989 using xda premium
Download kies and confirm cable is include data transfer
Sent from my SAMSUNG-SGH-T989 using xda premium
Galaxy s2 not don't detect on pc
JBMe94 said:
Download kies and confirm cable is include data transfer
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Hi. I have the same problem on my galaxy s2. running jelly bean. it all started after i updated the new firmware. when i connect my phone to my pc it does nothing. it only charges. iv'e done everything i can think off. installed Kies. changed cables. changed Pc's. tried on my laptop nothing its not picking up anything.even went into the USB utilities and it says connect USB cable to use mass storage. . it keeps on saying that. iv'e tried the debugging thing switch it on and off it doesn't work. i have even dialed *#7284# and my device is on PDA. like i said i have tried everything and no luck . Help
OneOneSix said:
I just bought a galaxy s2 running stock gb on ebay and whenever I plug it in any pc it only charges. There is no usb notification nor does computer play a sound when the phone is connected. The phone makes a sound and just charges no matter what I do, I have tried usb debugging on/off and nothing. When I go into wifi/connection settings and select usb mode it says to connect a cable when the usb cable is already connected. I have tried many usb cables including the original samsung one.
Did I just buy a defective phone or am I missing something?
Click to expand...
Click to collapse
Install moboro on ur PC, make sure developer options is enabled, and debugging is ticked, moboro will install needed drivers for phone to be seen, check to see if the phone is rooted y downloading root checker from play store, if it is rooted it may be an issue with the rom, try downloading Odin and putting the phone in download mode, Odin should see the device and say "added", if so go to sammobile.com find ur devices newest firmware and DL the file, use odin to flash the firmware on the phone, should solve all issue, u can also use Odin without being rooted too so, if u need more info, links or whatever, just let me know
Sent from my SGH-T989 using xda premium
WARNING
I had the same problem about a month ago. I had sent it to Samsung and they replaced the USB part of my phone. So if nothing works, DON'T PREFORM A FACTORY RESET IF YOU'RE ON STOCK! THAT CAN MAKE YOU STUCK ON A BOOT LOOP! but if you're lucky then everything will work fine. I only say this because it happened to me.
I hope I posted this in the right subsection.
I used to be able to connect my s3 to my computer just fine. Now When I try to connect it, it randomly connects and then disconnects after a few seconds going back and forth like that. My computer doesn't have enough time to install the drivers for it since it disconnects on its own like that.
This is not my computers problem since it wont connect to my other computers. I even tried reinstalling the os on my pc for new set of drivers, but no luck.
Im sure it has something to do with my phone. My phone is rooted, so if any fixes include being rooted, Im good with that.
I tried changing from mtp to ptp connections, removing the battery, trying different usb ports and cables.Tried with usb debugging on and off too.
Im at my wits end here. please help!
Your usb port may be going bad. Check the port for any built up lint or other crap. Also check the pins, make sure they are all there and straight.
I tried another USB cable and it worked
Sent from my SGH-I747M using XDA Premium 4 mobile app