Hello Good people of xda forum
please i have a very big problem at my hand involving my newly acquired galaxy note II, the international version and i was hoping that some of you could help me out here because this is driving me nuts.
My galaxy note II is 2 weeks old and i rooted it 5 days after i got it with Odin and everything seems to work smooth ever since.
My problem now started yesterday when i stupidly went to install the chainfire 3d plugin because i wanted to try my older games that worked better on my qualcomm desire HD that wouldn't work well on my note II and what happened next has left me with sorrows since yesterday evening.
My lovely Note won't boot up anymore. It always gets stuck on the samsung galaxy note II logo. I am on the stock samsung rom.
I have tried everything i could read online to get it working including entering clockworkmod recovery, wiping data, cache, daivik, factory reset, formating sd and external sd card and nothing seems to work.
I have even tried entering odin download mode and downloading a custom firmware to flash but it keeps saying ''downloading'' but never finishes.
I am helpless now and do not want the 619 EURO i paid for this phone to be a waste. I can't return it since it is already rooted and i cannot unroot it in it's current state.
Is there any way for me to copy over the stock rom zip file to the external sd and flash it from there? If yes, can anyone provide me with a stock rom zip file to flash as i cant seem to find it anywhere?
My galaxy note II is the international version, bought at Saturn electronics shop, germany.
I will also admit that i am not so good with the technical stuff so a little explanation could help.
Thanks all.
There are stock roms in the note 2 forum here on XDA. You can boot into CWM recovery and mount your SD card to be able to use on your laptop/PC. If that fails, you can get the Android SDK specifically adb and push it to your internal SD.
I've done the same on my old Galaxy S2, so don't worry it's recoverable! I suggest getting a stock rom and flash via Odin, failing that use the method I mentioned above.
I apologise if I'm unclear, I'm exhausted tonight!
Sent from my Galaxy Note 2 through the Space Time Continuum
Best thing to try in ur case is make a full wipe and factory reset from recovery then to flash stock rom using odin then to make a wipe again if any problems,this should solve ur problem. Good luck.
↖(^▽^)↗ Sent From Rego Galaxy Note!! ↖(^▽^)↗
Thank you both a lot. I am trying your solutions now. I will post back if it worked.
You both are life savers. My phone is back up and running.
Can't thank you all enough.
Thanks.
Any luck with your Note II ?
You can also download a custom rom , then put it in an external card
Slot it in the phone , do full wipe and flash .
---------- Post added at 12:03 PM ---------- Previous post was at 12:00 PM ----------
freeway82 said:
You both are life savers. My phone is back up and running.
Can't thank you all enough.
Thanks.
Click to expand...
Click to collapse
Glad to hear the phone is alive.
freeway82 said:
You both are life savers. My phone is back up and running.
Can't thank you all enough.
Thanks.
Click to expand...
Click to collapse
Happy to hear that man, and welcome
↖(^▽^)↗ Sent From Rego Galaxy Note!! ↖(^▽^)↗
same problem after chainfire install
i have exactly the same problem as you. i rooted my phone and after installing chainfire from android market the phone does not get past the logo screen.hard reset,recovery nothing works. can you please tell me the method you used to recover the phone and maybe a link to the factory rom or files that i need to download. people say one has to flash the rom, but how exactly does one do that. big help please. my phone is from india.
rocky4 said:
i have exactly the same problem as you. i rooted my phone and after installing chainfire from android market the phone does not get past the logo screen.hard reset,recovery nothing works. can you please tell me the method you used to recover the phone and maybe a link to the factory rom or files that i need to download. people say one has to flash the rom, but how exactly does one do that. big help please. my phone is from india.
Click to expand...
Click to collapse
Hello, sorry for late reply. Here is the link you need
http://forum.xda-developers.com/showthread.php?t=1896696
Search for your country's version of the stock rom and download it.
Download also the odin files included in that first post.
Once you have the stock rom for your country and odin files downloaded, unrar them if they are zipped and place their folders on the desktop or somewhere else you can
easily find them.
Now open odin from the folder you unrared and turn off your phone (your phone shouldn't be connected to the computer at this point).
Once your phone is off. Press and hold simultaneously the volume down button, home key button and the power button. Keep holding them until you
see the samsung logo. Then let go of the buttons and your phone would enter downloading mode.
Now plug in your phone via usb to your computer and a blue light would show on odin with COM written in it.
Now check the box next to PDA and point odin to the tar file contained in the downloaded rom folder you placed on your desktop and hit start on odin.
A progress bar would now show on your phone indicating that odin is flashing your phone with the stock rom.
Once it's finished successfully, it will show on odin "passed" in a green light and your phone should reboot and voila, your phone is now clean as new.
From there, I believe you continue on your own. Now disconnect your pbone and enjoy.
There are also pictures on the link I posted that would explain the process better.
If you any further questions, just ask.
Good luck.
Thats why i love XDA community, if u care to share your knowledge to help others, they will for sure help another and the knowledge circle grows
↖(^▽^)↗ Sent From Rego Galaxy Note!! ↖(^▽^)↗
UNREAL. I did the exact same thing. Rooted...no prob. Chainfire3d plugin. Bricked.
I have the Sprint US version. Which ROM do I need?
Same issue
I have the Verizon I605 version, now I am stuck between the downloading, do not turn off target and the System software not authorized screens........Please help, also Im on a Macbook please include proper instructions for my idiotic turn of events.
freeway82 said:
Hello, sorry for late reply. Here is the link you need
http://forum.xda-developers.com/showthread.php?t=1896696
Search for your country's version of the stock rom and download it.
Download also the odin files included in that first post.
Once you have the stock rom for your country and odin files downloaded, unrar them if they are zipped and place their folders on the desktop or somewhere else you can
easily find them.
Now open odin from the folder you unrared and turn off your phone (your phone shouldn't be connected to the computer at this point).
Once your phone is off. Press and hold simultaneously the volume down button, home key button and the power button. Keep holding them until you
see the samsung logo. Then let go of the buttons and your phone would enter downloading mode.
Now plug in your phone via usb to your computer and a blue light would show on odin with COM written in it.
Now check the box next to PDA and point odin to the tar file contained in the downloaded rom folder you placed on your desktop and hit start on odin.
A progress bar would now show on your phone indicating that odin is flashing your phone with the stock rom.
Once it's finished successfully, it will show on odin "passed" in a green light and your phone should reboot and voila, your phone is now clean as new.
From there, I believe you continue on your own. Now disconnect your pbone and enjoy.
There are also pictures on the link I posted that would explain the process better.
If you any further questions, just ask.
Good luck.
Click to expand...
Click to collapse
What do you do if you can't get your computer to recognize your phone plugged in the USB? I tried to delete the Samsung Drivers and reinstall but it didn't work. I can get my phone to Odin mode but can not get it to flash.
PLEASE HELP.
Make sure you've installed Samsung usb drivers.
Edit: should have read your entire post *sorry* Make sure there are no other usb related proggies running; they might interfere with your sammie usb drivers..
Sent from my GT-N7100 using xda app-developers app
kustom1955 said:
What do you do if you can't get your computer to recognize your phone plugged in the USB? I tried to delete the Samsung Drivers and reinstall but it didn't work. I can get my phone to Odin mode but can not get it to flash.
PLEASE HELP.
Click to expand...
Click to collapse
-Don't use any extension cable to connect device, if any.
-Try other USB port (2.0)
-Close Firewall
-Close antivirus
-Kies shouldn't working in background
-Still no way then use different machine.
Help please!!!!
I have manged to soft brick my galaxy note 2 without any luck of reviving it through all the methods prescribed in this thread as well as the other countless threads !!
Can anybody please guide me where i am going wrong..
I can put the phone in download mode and using odin 1.85 or 3.04 manage to flash these stock roms but they all FAIL after modem.bin..
typically as soon as the Radio starts flashing it fails... I have downloaded these two files and i a tryng my luck with them...
I cannot enter into recovery mode to do a factory reset :crying:
The files i am using are as below :
1) N7100XXUFND3_N7100ODDFND2_N7100DDUFND1_HOME.tar.md5
2) N7100XXALIE_N7100ODDALI9_N7100DDALI9_HOME.tar.md5
Friends plese helpme out.. dont wanna turn this phone into a paper weight... '
Its the international GT N7100.. and think its a sudden death situation...
Related
I would like to apologize in advance if I posted in the wrong category (I think it's the right category). As the title says I have done a mega wipe with my Samsung Galaxy S3 (SGH-I747) and completely removed the OS along with the System Recovery and everything. It is basically just the phone and nothing inside. When I plug it in the computer, my windows OS makes a sound signaling it detected a device but then nothing happens. I do see a red light turning on my Galaxy S3, I think it says it's charging. Tried accessing the recovery mode, but no luck.... So my question is...is there any way to reflash an OS? Thank you so much XDA!!
If you can get to download mode, you can use Odin to flash a rom. Why would you wipe the recovery partition?
You need some JTAG action.
strawhatluffy28 said:
I would like to apologize in advance if I posted in the wrong category (I think it's the right category). As the title says I have done a mega wipe with my Samsung Galaxy S3 (SGH-I747) and completely removed the OS along with the System Recovery and everything. It is basically just the phone and nothing inside. When I plug it in the computer, my windows OS makes a sound signaling it detected a device but then nothing happens. I do see a red light turning on my Galaxy S3, I think it says it's charging. Tried accessing the recovery mode, but no luck.... So my question is...is there any way to reflash an OS? Thank you so much XDA!!
Click to expand...
Click to collapse
Hi My friend this is happened for me b4 and this what I did
1- take your battery out for about 5 Minutes.
2- Download Odin and The firmware orginal no rooting no custom recovery ** I started with ICS from Samsung-update.com***
3- Start Odin Don't add firmware yet.
4- Put your phone in Download mode by holding Volum down+ home+power and when the screen come push volum up to go to download mode.
5- Now connect your phone to PC and Odin will see your phone on which com.
6- Now add the Firmware by clicking on PDA when it say ready just click start on odin.
7- You are back on orginal Rom ( No root or Custom recovery) and you can go from there.
Good Luck
IF I Help Hit Thank Botton
saj222 said:
You need some JTAG action.
Click to expand...
Click to collapse
I can't even access the Download mode part , is there a thread that could point me in the right direction for JTAG? (wtv that is :S) Thanks!
strawhatluffy28 said:
I can't even access the Download mode part , is there a thread that could point me in the right direction for JTAG? (wtv that is :S) Thanks!
Click to expand...
Click to collapse
JTAG repair is done to your phone by an expert with special equipment. You would need to bring your phone to them or ship it off to be fixed. Google '(your city) Jtag repair' . No boot but still having a sound from connecting to PC is a good sign that your bootloader is corrupted.
If the computer makes as noise when you plug it in, try for download mode... Even If the screen of the phone doesn't turn on try to connect and use Odin, sometimes Odin will pick it up...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hello,
I just rooted my Samsung Galaxy S3 today. I copied several ROM zip files (i think there were 4) to my SD card to test out using MTP. As you may know, MTP (on Windows 7) is not the greatest experience. Since the copy was taking so long, I canceled it. I now know that when you do that MTP seems to leave the incomplete file there with the fill file size. I suspect the is the root of the issue.
I went to install the Omega v46.1 Jelly Bean 4.2.2 ROM after testing a different one that I was not happy with. Omega game up with its installer, everything seemed to work good. It asked to wipe the user data, and reboot the device. All looks good. I could not wait to try another ROM.
Blank screen.... waiting, waiting... Maybe they just have no boot logo.... waiting. Okay after waiting several hours for it to boot I thought maybe I would try to reboot and clear the user data and cache myself. Tried to reboot. Nothing happened. No vibration, no LED, not logo.
Cannot get into Download mode. Cannot get into Recovery.
Pull battery, wait. Put battery in while holding Volume key, Power button and Home. Nothing at all. Battery pull and waited a few hours. Tried again. Nothing. Panic starts.... I remembered the MTP file copy and checked the ROM zip files. Incomplete zip file.... Damn.
It is not easy to cover everything I have tried to fix it or all of the research I have done, but I'll try.
Researched bricked devices. Learned of hard vs soft. This does not appear to be soft to me, but why would my bootloader be damaged by installing this ROM?? I am new to this, but I think I understand the difference pretty good.
I spent the last few hours trying to find a micro USB cable that I could use to make a USB Jig. I did that using this guide and it did not help
http://forum.xda-developers.com/showthread.php?t=2121306
And this guide
http://forum.xda-developers.com/showthread.php?p=8822843
Researched the Jig more to make sure I got it right. Tested again with multimeter... It all looks good to me. Damn, it must be a real hard brick.
When I plug the phone into my PC without the battery in the phone I get a red LED.
When I plug it in with the battery in, I get no LED, no screen/logo, ect. Nothing. Windows does detect a device called "QHSUSB_DLOAD". I got the Qualcomm driver and QPTS hoping that there would be something that I could do... maybe backup my friend's bootrom and put it on my phone... The COM11 port from the device is not detected, so even if I could figure out a way to do what I said, I have no way to do it. Could be a Windows 7 unsigned drivers issue, but I have tried 3 different solutions to that without knowing how the device should look in Device Manager if the driver is accepted.
Looked for other solutions...
Old thread, HTC specific, not really any help... http://forum.xda-developers.com/showthread.php?t=822939
Bad news, need to send device back... http://forum.xda-developers.com/showthread.php?t=1651149
This looks possible, but I have not tried it yet because the steps are not that clear and it requires a Linux box, and I don't really want to dig into that can of worms right now. (which distro, which PC do I use, what software/packages are required, ect) http://forum.xda-developers.com/showthread.php?t=1916796
Possible solution with linux box... http://forum.xda-developers.com/showthread.php?t=2239451
Goes on to this one, a lot like the other linux option above... http://forum.xda-developers.com/showthread.php?t=2369125
If I am missing anything, please let me know. Is this Linux option really a possibility? Do I need a Rogers bootloader?
Perhaps I can use this idea to get my friend to back his up for me off his Rogers S3: http://forum.xda-developers.com/showthread.php?t=2374958
I could try the linux option tomorrow, or the JTAG tomorrow if I drive an hour away to a guy that can do it.
dege13 said:
Hello,
I just rooted my Samsung Galaxy S3 today. I copied several ROM zip files (i think there were 4) to my SD card to test out using MTP. As you may know, MTP (on Windows 7) is not the greatest experience. Since the copy was taking so long, I canceled it. I now know that when you do that MTP seems to leave the incomplete file there with the fill file size. I suspect the is the root of the issue.
I went to install the Omega v46.1 Jelly Bean 4.2.2 ROM after testing a different one that I was not happy with. Omega game up with its installer, everything seemed to work good. It asked to wipe the user data, and reboot the device. All looks good. I could not wait to try another ROM.
Blank screen.... waiting, waiting... Maybe they just have no boot logo.... waiting. Okay after waiting several hours for it to boot I thought maybe I would try to reboot and clear the user data and cache myself. Tried to reboot. Nothing happened. No vibration, no LED, not logo.
Cannot get into Download mode. Cannot get into Recovery.
Pull battery, wait. Put battery in while holding Volume key, Power button and Home. Nothing at all. Battery pull and waited a few hours. Tried again. Nothing. Panic starts.... I remembered the MTP file copy and checked the ROM zip files. Incomplete zip file.... Damn.
It is not easy to cover everything I have tried to fix it or all of the research I have done, but I'll try.
Researched bricked devices. Learned of hard vs soft. This does not appear to be soft to me, but why would my bootloader be damaged by installing this ROM?? I am new to this, but I think I understand the difference pretty good.
I spent the last few hours trying to find a micro USB cable that I could use to make a USB Jig. I did that using this guide and it did not help
http://forum.xda-developers.com/showthread.php?t=2121306
And this guide
http://forum.xda-developers.com/showthread.php?p=8822843
Researched the Jig more to make sure I got it right. Tested again with multimeter... It all looks good to me. Damn, it must be a real hard brick.
When I plug the phone into my PC without the battery in the phone I get a red LED.
When I plug it in with the battery in, I get no LED, no screen/logo, ect. Nothing. Windows does detect a device called "QHSUSB_DLOAD". I got the Qualcomm driver and QPTS hoping that there would be something that I could do... maybe backup my friend's bootrom and put it on my phone... The COM11 port from the device is not detected, so even if I could figure out a way to do what I said, I have no way to do it. Could be a Windows 7 unsigned drivers issue, but I have tried 3 different solutions to that without knowing how the device should look in Device Manager if the driver is accepted.
Looked for other solutions...
Old thread, HTC specific, not really any help... http://forum.xda-developers.com/showthread.php?t=822939
Bad news, need to send device back... http://forum.xda-developers.com/showthread.php?t=1651149
This looks possible, but I have not tried it yet because the steps are not that clear and it requires a Linux box, and I don't really want to dig into that can of worms right now. (which distro, which PC do I use, what software/packages are required, ect) http://forum.xda-developers.com/showthread.php?t=1916796
Possible solution with linux box... http://forum.xda-developers.com/showthread.php?t=2239451
Goes on to this one, a lot like the other linux option above... http://forum.xda-developers.com/showthread.php?t=2369125
If I am missing anything, please let me know. Is this Linux option really a possibility? Do I need a Rogers bootloader?
Perhaps I can use this idea to get my friend to back his up for me off his Rogers S3: http://forum.xda-developers.com/showthread.php?t=2374958
I could try the linux option tomorrow, or the JTAG tomorrow if I drive an hour away to a guy that can do it.
Click to expand...
Click to collapse
I had the exactly same thing as you . I flashed the omega 4.1.2 rom and got the black screen.....
what can we do now?
yaoll78 said:
I had the exactly same thing as you . I flashed the omega 4.1.2 rom and got the black screen.....
what can we do now?
Click to expand...
Click to collapse
You guys flashed a ROM for the international S3. Check the forum you got that ROM from.
Quite sure JTAG is a good place to start now.
SD CARD
hi there
i have an SDcard of 4GB i tried on 4 S3 i747M hard bricked phones its worked ....this card let them alive to download mode by pressing volume down key +home key + power. i want to share this image but when ever i connect this card to my PC (windows) its shows (need to format your card)
is there any software so i can make image and share...to help those who hard-bricked their phones.
regards
rasgula said:
hi there
i have an SDcard of 4GB i tried on 4 S3 i747M hard bricked phones its worked ....this card let them alive to download mode by pressing volume down key +home key + power. i want to share this image but when ever i connect this card to my PC (windows) its shows (need to format your card)
is there any software so i can make image and share...to help those who hard-bricked their phones.
regards
Click to expand...
Click to collapse
Unplug and plug till pc recognize it with your files on it. I need that image so if you could share it, it would be appreciate.
I want to share but how to extract the image from sd card?
Sent from my C6506 using Tapatalk
rasgula said:
I want to share but how to extract the image from sd card?
Sent from my C6506 using Tapatalk
Click to expand...
Click to collapse
By Mr.X ''If you want to create your own dump from a friends device the command in a rooted adb shell would be as follows but not exact depending where you want the dump file to end up being on your sd cards. "dd if=/dev/block/mmcblk0 of=/storage/sdcard1/debrick.bin bs=1024 count=81920" That is what I used my my co-workers CM 10.2 rom to get the 4.3 bootloader/debrick dump. NOTE: the device has to be rooted with a working busybox that supports the dd command''
dege13 said:
Hello,
I just rooted my Samsung Galaxy S3 today. I copied several ROM zip files (i think there were 4) to my SD card to test out using MTP. As you may know, MTP (on Windows 7) is not the greatest experience. Since the copy was taking so long, I canceled it. I now know that when you do that MTP seems to leave the incomplete file there with the fill file size. I suspect the is the root of the issue.
I went to install the Omega v46.1 Jelly Bean 4.2.2 ROM after testing a different one that I was not happy with. Omega game up with its installer, everything seemed to work good. It asked to wipe the user data, and reboot the device. All looks good. I could not wait to try another ROM.
Blank screen.... waiting, waiting... Maybe they just have no boot logo.... waiting. Okay after waiting several hours for it to boot I thought maybe I would try to reboot and clear the user data and cache myself. Tried to reboot. Nothing happened. No vibration, no LED, not logo.
Cannot get into Download mode. Cannot get into Recovery.
Pull battery, wait. Put battery in while holding Volume key, Power button and Home. Nothing at all. Battery pull and waited a few hours. Tried again. Nothing. Panic starts.... I remembered the MTP file copy and checked the ROM zip files. Incomplete zip file.... Damn.
It is not easy to cover everything I have tried to fix it or all of the research I have done, but I'll try.
Researched bricked devices. Learned of hard vs soft. This does not appear to be soft to me, but why would my bootloader be damaged by installing this ROM?? I am new to this, but I think I understand the difference pretty good.
I spent the last few hours trying to find a micro USB cable that I could use to make a USB Jig. I did that using this guide and it did not help
http://forum.xda-developers.com/showthread.php?t=2121306
And this guide
http://forum.xda-developers.com/showthread.php?p=8822843
Researched the Jig more to make sure I got it right. Tested again with multimeter... It all looks good to me. Damn, it must be a real hard brick.
When I plug the phone into my PC without the battery in the phone I get a red LED.
When I plug it in with the battery in, I get no LED, no screen/logo, ect. Nothing. Windows does detect a device called "QHSUSB_DLOAD". I got the Qualcomm driver and QPTS hoping that there would be something that I could do... maybe backup my friend's bootrom and put it on my phone... The COM11 port from the device is not detected, so even if I could figure out a way to do what I said, I have no way to do it. Could be a Windows 7 unsigned drivers issue, but I have tried 3 different solutions to that without knowing how the device should look in Device Manager if the driver is accepted.
Looked for other solutions...
Old thread, HTC specific, not really any help... http://forum.xda-developers.com/showthread.php?t=822939
Bad news, need to send device back... http://forum.xda-developers.com/showthread.php?t=1651149
This looks possible, but I have not tried it yet because the steps are not that clear and it requires a Linux box, and I don't really want to dig into that can of worms right now. (which distro, which PC do I use, what software/packages are required, ect) http://forum.xda-developers.com/showthread.php?t=1916796
Possible solution with linux box... http://forum.xda-developers.com/showthread.php?t=2239451
Goes on to this one, a lot like the other linux option above... http://forum.xda-developers.com/showthread.php?t=2369125
If I am missing anything, please let me know. Is this Linux option really a possibility? Do I need a Rogers bootloader?
Perhaps I can use this idea to get my friend to back his up for me off his Rogers S3: http://forum.xda-developers.com/showthread.php?t=2374958
I could try the linux option tomorrow, or the JTAG tomorrow if I drive an hour away to a guy that can do it.
Click to expand...
Click to collapse
Sent from my Intex Aqua 3.2 using Tapatalk 2
Hello, i have the same problem with an i747m, i'd appreciate if some one can share the SD image to fix this thx all for your help and i hope it wont take to long,
Cerisan said:
Hello, i have the same problem with an i747m, i'd appreciate if some one can share the SD image to fix this thx all for your help and i hope it wont take to long,
Click to expand...
Click to collapse
You flashed the wrong image too? Your phone also doesn't go into download or recovery?
Unbrink was successful
audit13 said:
You flashed the wrong image too? Your phone also doesn't go into download or recovery?
Click to expand...
Click to collapse
Hello, i hardbricked my phone with other method, but it had the same symptoms as your bricked phones, here is a link to a SD image that worked like a charm for me, tested with a 64GB micro SD, and used win32diskmanager so i can create the SD in windows, cheers and good luck unbriking your phone
www(mediafire(com/download/0vg9sgcvk4zuwm0/debrick-SGH-I747M-UEMK5.img
PS The unbrink was successful , i really dont remember all the posts where i get those files but here's the file for this thread
salam i downloaded 4.4.2 rom from sammobile.com and flashed it with mobile odin everything was cool it installed sucessfully but my sim was not detected so i reebooted it but nothing happened instead it was hard bricked so i request you to give a debrick file for 4.4.2 as 4.3 debrick file does nothing for me thanks in advance waiting for ur reply
---------- Post added at 11:22 AM ---------- Previous post was at 11:15 AM ----------
rasgula said:
hi there
i have an SDcard of 4GB i tried on 4 S3 i747M hard bricked phones its worked ....this card let them alive to download mode by pressing volume down key +home key + power. i want to share this image but when ever i connect this card to my PC (windows) its shows (need to format your card)
is there any software so i can make image and share...to help those who hard-bricked their phones.
regards
Click to expand...
Click to collapse
sir i downloaded 4.4.2 rom from sammobile.com and flashed it with mobile odin everything was cool it installed sucessfully but my sim was not detected so i reebooted it but nothing happened instead it was hard bricked so i request you to give a debrick file for 4.4.2 as 4.3 debrick file does nothing for me thanks in advance waiting for ur reply
Try this
www(mediafire(com/download/0vg9sgcvk4zuwm0/debrick-SGH-I747M-UEMK5.img
Sent from my SM-N900W8 using Tapatalk
Just fyi, in case you didn't see my other posts about it, updating from 4.3 to 4.4.2 using Mobile Odin will brick the device. MO cannot flash the full firmware so your brick was caused by flashing the modem onto 4.3 firmware.
rasgula said:
Try this
www(mediafire(com/download/0vg9sgcvk4zuwm0/debrick-SGH-I747M-UEMK5.img
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
plz provide ur cell no so that we can discuss it easily this file didnt worked for me
---------- Post added at 08:52 AM ---------- Previous post was at 08:47 AM ----------
DocHoliday77 said:
Just fyi, in case you didn't see my other posts about it, updating from 4.3 to 4.4.2 using Mobile Odin will brick the device. MO cannot flash the full firmware so your brick was caused by flashing the modem onto 4.3 firmware.
Click to expand...
Click to collapse
sir what to do now? as 4.3 debrick img above didnt worked for me
Do you have an I747M? If you have the I747 that image won't work.
I just posted two 4.3 images to try in the debrick thread. This should probably be discussed there anyway just so all of the info is easy to find.
DocHoliday77 said:
Do you have an I747M? If you have the I747 that image won't work.
I just posted two 4.3 images to try in the debrick thread. This should probably be discussed there anyway just so all of the info is easy to find.
Click to expand...
Click to collapse
its i747m rogers bricked it by flashing 4.4.2 with mobile odin
Mobile odin cannot flash the full firmware, so you ended up with the 4.4.2 modem on 4.3 firmware which we know will brick.
You will need to use a debrick.img from another I747M, probably from another Rogers one specifically. Not sure if it'll work or not from another carrier.
Note that we have yet to get it working for any device that bricked by flashing the modem. Watch the debrick thread for updates.
Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated
I too Have a T999L that is hard bricked. No issues rooting. used swapper 2 and link2sd and got hard bricked. I am running du_d2tmo-2013-10-14 rom 4.3 JB. I attempted the debrick method using both nix and winblows.. no results whatsoever . not a single error. in fact, i cannot get my T999L to do anything at all. i plug it into the pc and IF the battery is out, the red light comes on. with the battery in, it does nothing at all. ANY help would be greatly appreciated
shawzaw said:
Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated
Click to expand...
Click to collapse
Can you get into download mode? Does it show up on Odin? If it does then flash a root66 img root66_TMO_T999UVUEMJC for my Tmobile T999 This is what I used when I thought my phone was bricked. I used Odin to flash TWRP recovery and then format, and flash a custom rom. Good luck
shawzaw said:
Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated
Click to expand...
Click to collapse
Rom Manager most likely partitioned your INTERNAL SD Card instead. You'd have to Flash Root66 for Android 4.2 via Odin.
BlazeUser said:
I too Have a T999L that is hard bricked. No issues rooting. used swapper 2 and link2sd and got hard bricked. I am running du_d2tmo-2013-10-14 rom 4.3 JB. I attempted the debrick method using both nix and winblows.. no results whatsoever . not a single error. in fact, i cannot get my T999L to do anything at all. i plug it into the pc and IF the battery is out, the red light comes on. with the battery in, it does nothing at all. ANY help would be greatly appreciated
Click to expand...
Click to collapse
Did you try the De-Bricking Thread in Development sub forum ?
Perseus71 said:
Rom Manager most likely partitioned your INTERNAL SD Card instead. You'd have to Flash Root66 for Android 4.2 via Odin.
Did you try the De-Bricking Thread in Development sub forum ?
Click to expand...
Click to collapse
yes i tried this method on both windows and ubuntu 12.04 http://forum.xda-developers.com/showthread.php?t=2439367
BlazeUser said:
yes i tried this method on both windows and ubuntu 12.04 http://forum.xda-developers.com/showthread.php?t=2439367
Click to expand...
Click to collapse
What image did you use ?
Perseus71 said:
What image did you use ?
Click to expand...
Click to collapse
i used the T999L image
Hey can someone help me where to find a tutorial to root my T999v, I only see tutorials for T999 and T999L can i use those same tutorial to root my phone on version 4.1.2 please i just don't wanna brick my phone so someone help me
BlazeUser said:
i used the T999L image
Click to expand...
Click to collapse
Please use 4.3 image for T999
dorian2kx said:
Hey can someone help me where to find a tutorial to root my T999v, I only see tutorials for T999 and T999L can i use those same tutorial to root my phone on version 4.1.2 please i just don't wanna brick my phone so someone help me
Click to expand...
Click to collapse
Yes.
acedik said:
Can you get into download mode? Does it show up on Odin? If it does then flash a root66 img root66_TMO_T999UVUEMJC for my Tmobile T999 This is what I used when I thought my phone was bricked. I used Odin to flash TWRP recovery and then format, and flash a custom rom. Good luck
Click to expand...
Click to collapse
no i cant get into download mode or recovery mode, it loads nothing up, wont vibrate or anything, its hard bricked, i dont know what version of odin i need for my phone, it from tmobile samsung galaxy s3 sgh-t999
shawzaw said:
no i cant get into download mode or recovery mode, it loads nothing up, wont vibrate or anything, its hard bricked, i dont know what version of odin i need for my phone, it from tmobile samsung galaxy s3 sgh-t999
Click to expand...
Click to collapse
Wow, so its still bricked from December? Did you recently try the debrick method in dev section?
Sent from my SGH-T999 using Tapatalk
bricked
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can
syben7 said:
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can
Click to expand...
Click to collapse
You may need a debrick.img created from a device with the NC1 firmware. Do you know what build you were on before it bricked?
We dont have that NC1 image yet, that im aware of, but ill see if I cant find someone to make one.
Sent from my SGH-T999 using Tapatalk
syben7 said:
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can
Click to expand...
Click to collapse
Sent you a pm with a new debrick.img to try. Please reply via pm to let me know how it goes. Good luck!
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
You may need a debrick.img created from a device with the NC1 firmware. Do you know what build you were on before it bricked?
We dont have that NC1 image yet, that im aware of, but ill see if I cant find someone to make one.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I was on the pac 4.4 nightly, had flashed new nightly updates regularly for nearly a month with no problems, but then decided to switch to cm11, when I tried to flash that it gave me the bootloader error, so I went to the method that was a supposed fix for that and flashed it and thats when it went dead.
Same Problem
Hey guys I have the same exact problem heres how it started, which I think accurately describes everyone else with the same problem:
1) I downloaded the correct TWRP for my phone and unlocked it previously with ODIN.
2) So far everything is fine, now I find a nice new ROM which is stable and try to flash it. The rom was: FlashingDroid_S5_v2.2
3)First I deleted cache and dalvic cache as well, basically the default wipe.
4) I flashed the ROM and it said it was succesful, I click reboot, and nothing
Symptoms
1)No vibration
2)No screen image whatsoever
3)No signs of booting up with computer
4) Does not boot up using JIG method
5)Computer does not see phone
Notes
1) I tried checking the pulse of the phone W/out battery and gave me very little wattage, and eventually it drained out
2) Then I tried plugging it into my computer and the front red light went on but no power in phone and PC cannot see it
3) Sometimes when I put the battery in, it gives me a quick flash, from the flashlight on the back, OR it gives a millisecond of a vibration
4)Before I flashed I had android 4.3 Jellybean stock with root-again I tried to flash FlashingDroid_S5_v2.2 w/TWRP
Trials to resolve in which did NOT work
1) I tried putting it into download mode, with JIG but no battery and had someone put the battery in WHILE i was pressing HOME+POWER+VOLUME DOWN with the JIG
Results: It sometimes gave me a small vibration, but no results
2) Tried to install correct ODIN and KIES software
Result: Gave me negative sound on laptop meaning it does not recognize device-it does not show up in My Computer either
Having the same issue.
I used the FlashingDroid_S5_v2.2 rom. Wiped the phone before flashing, the prompt said successful and rebooted.
Then nothing.
No response from charging, power, download mode... nothing.
Hello there!
I have a problem with my samsung sgh-t989, the phone does not start, good start, but goes the screen "samsung" and restarts.
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1414341
but can not get it to boot, I have access to download mode and tried to install multiple ROMS, all is the same.
I can not know what else to do ...
sorry for my English, I used google translator ...
I hope that a brilliant mind can help me solve this great problem.
Thank you!
PD: i'm form Chile...
jpgallardo said:
Hello there!
I have a problem with my samsung sgh-t989, the phone does not start, good start, but goes the screen "samsung" and restarts.
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1414341
but can not get it to boot, I have access to download mode and tried to install multiple ROMS, all is the same.
I can not know what else to do ...
sorry for my English, I used google translator ...
I hope that a brilliant mind can help me solve this great problem.
Thank you!
PD: i'm form Chile...
Click to expand...
Click to collapse
Do a clean install of the stock rom using fastboot.
Lokke9191 said:
Do a clean install of the stock rom using fastboot.
Click to expand...
Click to collapse
no, not really familiar with that method, you have a tutorial that I could follow? I'd appreciate it
jpgallardo said:
no, not really familiar with that method, you have a tutorial that I could follow? I'd appreciate it
Click to expand...
Click to collapse
Sorry, I forgot the s2 does not have fastboot mode. You should download the stock rom zip and gapps onto your SD card. Then factory reset. Install the stock rom and gapps. Then factory reset again. Make sure you have the proper rom. I've had bootloops like you when trying to install certain roms. Currently my wife's s2 t989 is running cm 10.1.2 with no problems. Cm 10.2 would cause bootloops. If you are getting to the Samsung logo your phone is not bricked, so don't worry. We just have to figure out what's going wrong with your install process. Let me know what happens.
Did you flash a custom recovery? And if so which one? This will be needed before flashing roms.
Lokke9191 said:
Sorry, I forgot the s2 does not have fastboot mode. You should download the stock rom zip and gapps onto your SD card. Then factory reset. Install the stock rom and gapps. Then factory reset again. Make sure you have the proper rom. I've had bootloops like you when trying to install certain roms. Currently my wife's s2 t989 is running cm 10.1.2 with no problems. Cm 10.2 would cause bootloops. If you are getting to the Samsung logo your phone is not bricked, so don't worry. We just have to figure out what's going wrong with your install process. Let me know what happens.
Did you flash a custom recovery? And if so which one? This will be needed before flashing roms.
Click to expand...
Click to collapse
the way I'm working is THE FOLLOWING:
First, I have samsung drivers installed on my notebook and the phone is recognized.
Second, open the odin program, and on the phone I press vol +, vol + and connect the USB cable, the phone starts in download mode ...
third, odin in pda select rom with. tar.md5, I remove the selection to "re-partition" (sometimes I leave selected)
Fourth, I start ...
wait a while, the installation goes well (I sometimes appears "fail") but usually completes the installation, the phone restarts (odin says that ended with "pass") once it restarts in case of using a rom T-Mobile, the logo appears on the screen, shuts down or restarts ... and no more lights, again only shows the samsung logo and restart every two seconds about ...
I guess I'm doing the procedure well, do not know if anything else can fail ...
I do not know if it's possible to "format" the phone, leave it completely to zero and see if that way I can mount a rom ... by the way, a couple of the rom I downloaded from sammmobile.com so I think that should be the corresponding ...
I hope someone can help me please ...
respect to recovery, well this phone apparently was installed a wrong rom, had no recovery, I try to install the cwm apparently installed fine, but when trying to enter the recovery, as it appears again, the phone restarts just what mentioned earlier
Did you preform a NANDROID backup before flashing?
If not you probably will have to install KIES and firmware upgrade from there. I had to do this a few times with bad roms/recoveries.
You can try CMinstaller (easiest way to flash rom), but unless you enabled usb debugging, it may not work...
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
jtgr94 said:
Did you preform a NANDROID backup before flashing?
If not you probably will have to install KIES and firmware upgrade from there. I had to do this a few times with bad roms/recoveries.
You can try CMinstaller (easiest way to flash rom), but unless you enabled usb debugging, it may not work...
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
Click to expand...
Click to collapse
the truth of the matter is that this phone I received in that state, do not know if they have enabled the usb debugging mode, the last thing I tried was to install cwm apparently installed fine, but when the phone happens always the same, I recorded a video youtube ... do not know if I can post it here but I will send it.
Thanks for trying to help!
jpgallardo said:
the truth of the matter is that this phone I received in that state, do not know if they have enabled the usb debugging mode, the last thing I tried was to install cwm apparently installed fine, but when the phone happens always the same, I recorded a video youtube ... do not know if I can post it here but I will send it.
Thanks for trying to help!
Click to expand...
Click to collapse
Can you boot into recovery by holding the vol up and down while powering the device on?
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
jtgr94 said:
Can you boot into recovery by holding the vol up and down while powering the device on?
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
Click to expand...
Click to collapse
noup... i can´t... not to recovery, just to download mode
jpgallardo said:
noup... i can´t... not to recovery, just to download mode
Click to expand...
Click to collapse
Download this recovery and flash it with Odin, and then try to reboot to recovery.http://www.mrwodtke.com/android/t989_guide/recovery.tar
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
jtgr94 said:
Download this recovery and flash it with Odin, and then try to reboot to recovery.http://www.mrwodtke.com/android/t989_guide/recovery.tar
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
Click to expand...
Click to collapse
the installation was performed correctly, but the recovery does not start the samsung logo again just load and restarts
jpgallardo said:
the installation was performed correctly, but the recovery does not start the samsung logo again just load and restarts
Click to expand...
Click to collapse
This is the only thing that I can think of that may work. I've done this a few times.
Download and install Samsung Kies on your computer if you do not have it already installed on it.
Note down your phone’s Serial number somewhere. You can find it under the battery of your device or the box your brand new device came with.
Launch Kies and click Tools > Firmware Upgrade and Initialization
Connect your device to computer using USB cable.
Enter your device model name in all CAPS (GT-I9500, for example) and click on OK.
Then you will be asked to enter the Serial Number of your device.
Once again, select OK on the next screen.
Doing this will force Kies to download the require firmware update files for your device.
Respond and confirm all securities warnings to clear the way for emergency firmware installation and then select Start Upgrade.samsung-firmware-restore
Kies will now start downloading firmware files and the process might take several minutes depending or data connection speed.
When it is finished, new firmware will be installed on your device and you will see: samsung-firmware-restore-complete
Click on OK and disconnect the cable.
Reboot your device and done!
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
---------- Post added at 09:52 PM ---------- Previous post was at 09:48 PM ----------
jtgr94 said:
This is the only thing that I can think of that may work. I've done this a few times.
Download and install Samsung Kies on your computer if you do not have it already installed on it.
Note down your phone’s Serial number somewhere. You can find it under the battery of your device or the box your brand new device came with.
Launch Kies and click Tools > Firmware Upgrade and Initialization
Connect your device to computer using USB cable.
Enter your device model name in all CAPS (GT-I9500, for example) and click on OK.
Then you will be asked to enter the Serial Number of your device.
Once again, select OK on the next screen.
Doing this will force Kies to download the require firmware update files for your device.
Respond and confirm all securities warnings to clear the way for emergency firmware installation and then select Start Upgrade.samsung-firmware-restore
Kies will now start downloading firmware files and the process might take several minutes depending or data connection speed.
When it is finished, new firmware will be installed on your device and you will see: samsung-firmware-restore-complete
Click on OK and disconnect the cable.
Reboot your device and done!
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
Click to expand...
Click to collapse
Boot your phone into download mode to do this, by the way.
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
jtgr94 said:
This is the only thing that I can think of that may work. I've done this a few times.
Download and install Samsung Kies on your computer if you do not have it already installed on it.
Note down your phone’s Serial number somewhere. You can find it under the battery of your device or the box your brand new device came with.
Launch Kies and click Tools > Firmware Upgrade and Initialization
Connect your device to computer using USB cable.
Enter your device model name in all CAPS (GT-I9500, for example) and click on OK.
Then you will be asked to enter the Serial Number of your device.
Once again, select OK on the next screen.
Doing this will force Kies to download the require firmware update files for your device.
Respond and confirm all securities warnings to clear the way for emergency firmware installation and then select Start Upgrade.samsung-firmware-restore
Kies will now start downloading firmware files and the process might take several minutes depending or data connection speed.
When it is finished, new firmware will be installed on your device and you will see: samsung-firmware-restore-complete
Click on OK and disconnect the cable.
Reboot your device and done!
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
Click to expand...
Click to collapse
I already have kies installed, I'll try, thanks!
I did everything like you said ... but it did not work, I tried three times, but said "this device version can not be updated." ... I think this team definitely dead ...
jtgr94 said:
This is the only thing that I can think of that may work. I've done this a few times.
Download and install Samsung Kies on your computer if you do not have it already installed on it.
Note down your phone’s Serial number somewhere. You can find it under the battery of your device or the box your brand new device came with.
Launch Kies and click Tools > Firmware Upgrade and Initialization
Connect your device to computer using USB cable.
Enter your device model name in all CAPS (GT-I9500, for example) and click on OK.
Then you will be asked to enter the Serial Number of your device.
Once again, select OK on the next screen.
Doing this will force Kies to download the require firmware update files for your device.
Respond and confirm all securities warnings to clear the way for emergency firmware installation and then select Start Upgrade.samsung-firmware-restore
Kies will now start downloading firmware files and the process might take several minutes depending or data connection speed.
When it is finished, new firmware will be installed on your device and you will see: samsung-firmware-restore-complete
Click on OK and disconnect the cable.
Reboot your device and done!
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
---------- Post added at 09:52 PM ---------- Previous post was at 09:48 PM ----------
Boot your phone into download mode to do this, by the way.
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
Click to expand...
Click to collapse
I did everything like you said ... but it did not work, I tried three times, but said "this device version can not be updated." ... I think this team definitely dead ...
jpgallardo said:
I did everything like you said ... but it did not work, I tried three times, but said "this device version can not be updated." ... I think this team definitely dead ...
Click to expand...
Click to collapse
It seems that way. But maybe someone else here knows how to go about fixing it. The only thing that leads me to believe it is dead, is that you can't boot into recovery even after Odin.
If anyone can figure out a fix, please share, I'm a bit curious...
Regards,
jtgr94
Sent from my Samsung Galaxy SII T989D Hercules CM11 Android 4.4.4
I just want to confirm your method for entering recovery. With the phone off and not plugged in you hold down both volume buttons and the power button. When the phone vibrates release the power button, and continue to hold down both volume buttons. Do not release volume buttons until the phone boots into recovery. This is what you are doing? I just want to cover the simple things before asking you to try more in depth possible solutions.
Check out this thread about faulty/dirty power buttons.
http://forum.xda-developers.com/showthread.php?t=1931310
you flashed with a nearly dead battery? I always charge mine to 100%. I've had issues where my phone won't boot up properly like what yours is doing when the battery hits 0%.
I'd plug it in and leave it for half an hour or so and see if it boots then. Let it charge to 100% and then put on either CWM or TWRP (I've had better luck with TWRP personally) and flash your ROM from there.
I've never had luck flashing anything but recovery and stock from Odin. Other things seemed to be a little flaky.
Also, since this is in the T989 forum, I'm presuming you have the T989 which I believe the recovery buttons are vol+ and power not both (but I could be wrong).
Once other thing you could try is grab a copy of the android SDK (specifically ADB) and run:
adb logcat > boot.log
and post the file it creates (called boot.log). Also, try running:
adb reboot recovery
to see if you can get into recovery mode. I THINK (but have never tried) that ADB should work from download mode. Try booting into download mode and running adb reboot recovery to see if that helps.
That is my best guess anyways.
Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help
classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit
Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help
No one can help
sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me