[Q] Tmobile Samsung galaxy S3 sgh-t999 is hard bricked, need help

[Q] Tmobile Samsung galaxy S3 sgh-t999 is hard bricked, need help - T-Mobile, Samsung Galaxy SIII

Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated

I too Have a T999L that is hard bricked. No issues rooting. used swapper 2 and link2sd and got hard bricked. I am running du_d2tmo-2013-10-14 rom 4.3 JB. I attempted the debrick method using both nix and winblows.. no results whatsoever . not a single error. in fact, i cannot get my T999L to do anything at all. i plug it into the pc and IF the battery is out, the red light comes on. with the battery in, it does nothing at all. ANY help would be greatly appreciated

shawzaw said:
Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated
Click to expand...
Click to collapse
Can you get into download mode? Does it show up on Odin? If it does then flash a root66 img root66_TMO_T999UVUEMJC for my Tmobile T999 This is what I used when I thought my phone was bricked. I used Odin to flash TWRP recovery and then format, and flash a custom rom. Good luck

shawzaw said:
Hi I have a samsung galaxt s3 sgh-t999, I rooted my phone with no problems and wanted to be able to move apps to sd card so I went to rom manager and clicked on partition sd card and it said it was going to reboot it shut off and now it wont turn back on, wont go into recovery mode, if i plug it into the computer, the computer dont pick it up, when i plug in the charger it does nothing... I really need help, is there away to fix it or do I have a $500 door stop or paper weight??? all help appreciated
Click to expand...
Click to collapse
Rom Manager most likely partitioned your INTERNAL SD Card instead. You'd have to Flash Root66 for Android 4.2 via Odin.
BlazeUser said:
I too Have a T999L that is hard bricked. No issues rooting. used swapper 2 and link2sd and got hard bricked. I am running du_d2tmo-2013-10-14 rom 4.3 JB. I attempted the debrick method using both nix and winblows.. no results whatsoever . not a single error. in fact, i cannot get my T999L to do anything at all. i plug it into the pc and IF the battery is out, the red light comes on. with the battery in, it does nothing at all. ANY help would be greatly appreciated
Click to expand...
Click to collapse
Did you try the De-Bricking Thread in Development sub forum ?

Perseus71 said:
Rom Manager most likely partitioned your INTERNAL SD Card instead. You'd have to Flash Root66 for Android 4.2 via Odin.
Did you try the De-Bricking Thread in Development sub forum ?
Click to expand...
Click to collapse
yes i tried this method on both windows and ubuntu 12.04 http://forum.xda-developers.com/showthread.php?t=2439367

BlazeUser said:
yes i tried this method on both windows and ubuntu 12.04 http://forum.xda-developers.com/showthread.php?t=2439367
Click to expand...
Click to collapse
What image did you use ?

Perseus71 said:
What image did you use ?
Click to expand...
Click to collapse
i used the T999L image

Hey can someone help me where to find a tutorial to root my T999v, I only see tutorials for T999 and T999L can i use those same tutorial to root my phone on version 4.1.2 please i just don't wanna brick my phone so someone help me

BlazeUser said:
i used the T999L image
Click to expand...
Click to collapse
Please use 4.3 image for T999
dorian2kx said:
Hey can someone help me where to find a tutorial to root my T999v, I only see tutorials for T999 and T999L can i use those same tutorial to root my phone on version 4.1.2 please i just don't wanna brick my phone so someone help me
Click to expand...
Click to collapse
Yes.

acedik said:
Can you get into download mode? Does it show up on Odin? If it does then flash a root66 img root66_TMO_T999UVUEMJC for my Tmobile T999 This is what I used when I thought my phone was bricked. I used Odin to flash TWRP recovery and then format, and flash a custom rom. Good luck
Click to expand...
Click to collapse
no i cant get into download mode or recovery mode, it loads nothing up, wont vibrate or anything, its hard bricked, i dont know what version of odin i need for my phone, it from tmobile samsung galaxy s3 sgh-t999

shawzaw said:
no i cant get into download mode or recovery mode, it loads nothing up, wont vibrate or anything, its hard bricked, i dont know what version of odin i need for my phone, it from tmobile samsung galaxy s3 sgh-t999
Click to expand...
Click to collapse
Wow, so its still bricked from December? Did you recently try the debrick method in dev section?
Sent from my SGH-T999 using Tapatalk

bricked
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can

syben7 said:
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can
Click to expand...
Click to collapse
You may need a debrick.img created from a device with the NC1 firmware. Do you know what build you were on before it bricked?
We dont have that NC1 image yet, that im aware of, but ill see if I cant find someone to make one.
Sent from my SGH-T999 using Tapatalk

syben7 said:
ive got a similar problem. tried this method http://forum.xda-developers.com/showthread.php?t=2439367 but it still will not do anything, no power, no reaction, just black screen. its tmobile sgh-t99l. really really need help if anyone can
Click to expand...
Click to collapse
Sent you a pm with a new debrick.img to try. Please reply via pm to let me know how it goes. Good luck!
Sent from my SGH-T999 using Tapatalk

DocHoliday77 said:
You may need a debrick.img created from a device with the NC1 firmware. Do you know what build you were on before it bricked?
We dont have that NC1 image yet, that im aware of, but ill see if I cant find someone to make one.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
I was on the pac 4.4 nightly, had flashed new nightly updates regularly for nearly a month with no problems, but then decided to switch to cm11, when I tried to flash that it gave me the bootloader error, so I went to the method that was a supposed fix for that and flashed it and thats when it went dead.

Same Problem
Hey guys I have the same exact problem heres how it started, which I think accurately describes everyone else with the same problem:
1) I downloaded the correct TWRP for my phone and unlocked it previously with ODIN.
2) So far everything is fine, now I find a nice new ROM which is stable and try to flash it. The rom was: FlashingDroid_S5_v2.2
3)First I deleted cache and dalvic cache as well, basically the default wipe.
4) I flashed the ROM and it said it was succesful, I click reboot, and nothing
Symptoms
1)No vibration
2)No screen image whatsoever
3)No signs of booting up with computer
4) Does not boot up using JIG method
5)Computer does not see phone
Notes
1) I tried checking the pulse of the phone W/out battery and gave me very little wattage, and eventually it drained out
2) Then I tried plugging it into my computer and the front red light went on but no power in phone and PC cannot see it
3) Sometimes when I put the battery in, it gives me a quick flash, from the flashlight on the back, OR it gives a millisecond of a vibration
4)Before I flashed I had android 4.3 Jellybean stock with root-again I tried to flash FlashingDroid_S5_v2.2 w/TWRP
Trials to resolve in which did NOT work
1) I tried putting it into download mode, with JIG but no battery and had someone put the battery in WHILE i was pressing HOME+POWER+VOLUME DOWN with the JIG
Results: It sometimes gave me a small vibration, but no results
2) Tried to install correct ODIN and KIES software
Result: Gave me negative sound on laptop meaning it does not recognize device-it does not show up in My Computer either

Having the same issue.
I used the FlashingDroid_S5_v2.2 rom. Wiped the phone before flashing, the prompt said successful and rebooted.
Then nothing.
No response from charging, power, download mode... nothing.

Related

Urgent Help needed, USB not being recognized!

I'm looked everywhere but nothing. Please help if you can.
I was on BeastMOD2.5 then some things on the phone were not working (Tmobile S2) so I called in and they shipped me a replacement. I used this link (http://forum.xda-developers.com/showthread.php?t=1323878) to restore it back to stock and unroot the phone and it worked besides one problem, I still got the synergy kernel gray screen at bootup, so as of now, i'm at stock, unrooted just with that synergy kernel screen. I looked it up and found the ODIN stock way to get it back so I tried that way, but now everytime I hook the USB to my computer to try to ODIN it, it always says USB not recognized (I've tried searching for fixes: clean USB, reinstall drivers, reinstall Klies, other computers, other USB cord, other USB ports but nothing).
I just need to get that synergy kernel screen off from bootup, but now that I cannot hook up the phone to any computer, what should I do? Is there a wireless option I have? Is there a way to brick the phone to where it won't even boot up when tmobile gets it back that they wouldn't even know? thing is it will also charge using a computer, but the computer won't recognize it (im done the whole settings USB options as well)
Please help, thanks guys.

any ideas?

le14 said:
I'm looked everywhere but nothing. Please help if you can.
I was on BeastMOD2.5 then some things on the phone were not working (Tmobile S2) so I called in and they shipped me a replacement. I used this link (http://forum.xda-developers.com/showthread.php?t=1323878) to restore it back to stock and unroot the phone and it worked besides one problem, I still got the synergy kernel gray screen at bootup, so as of now, i'm at stock, unrooted just with that synergy kernel screen. I looked it up and found the ODIN stock way to get it back so I tried that way, but now everytime I hook the USB to my computer to try to ODIN it, it always says USB not recognized (I've tried searching for fixes: clean USB, reinstall drivers, reinstall Klies, other computers, other USB cord, other USB ports but nothing).
I just need to get that synergy kernel screen off from bootup, but now that I cannot hook up the phone to any computer, what should I do? Is there a wireless option I have? Is there a way to brick the phone to where it won't even boot up when tmobile gets it back that they wouldn't even know? thing is it will also charge using a computer, but the computer won't recognize it (im done the whole settings USB options as well)
Please help, thanks guys.
Click to expand...
Click to collapse
does it recognize it in adb if usb debugging is enabled?

Did you try pulling the battery for 30 seconds?
Sent from my SGH-T989 using XDA App

reboot the PC / laptop
unplug all other USB devices

AllGamer said:
reboot the PC / laptop
unplug all other USB devices
Click to expand...
Click to collapse
I've tried that and i've tried this on 4 PC's and my usual Mac that I use to transfer files but no luck.
I also tried the debugging mode but nothing as well. Ill try for a couple more days with random things but since the rom is stock and everything is basically like out the box status if I were to return it with the synergy kernel screen on bootup, what would tmobile say even though everything is stock even the kernel?

Hey Buddy, there had been a few of us that has had the same problem.
For some reason, after you restored your phone back to stock, you still have the Synergy Logo when turn on and you lose your USB drivers, somehow, I don't know why. I tried so many ways for my computer to locate my phone, but after so many hours of looking, I gave up. Sold my phone to my friend and got another one.
Lesson learn. Someone should look into a solution for this problem
Thanks.

Mr_creeper_98 said:
Hey Buddy, there had been a few of us that has had the same problem.
For some reason, after you restored your phone back to stock, you still have the Synergy Logo when turn on and you lose your USB drivers, somehow, I don't know why. I tried so many ways for my computer to locate my phone, but after so many hours of looking, I gave up. Sold my phone to my friend and got another one.
Lesson learn. Someone should look into a solution for this problem
Thanks.
Click to expand...
Click to collapse
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....

ThC23 said:
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
Click to expand...
Click to collapse
I used the easiest unroot method ever
http://forum.xda-developers.com/showthread.php?t=1323878

ThC23 said:
This is good to know for anyone that is looking to restore phone back to stock.
So I'm guessing people should install stock kernel first via Odin and then flash stock rom/recovery.
Maybe this will take care of Synergy logo.
What steps did you take?
Powered by the SGSII....
Click to expand...
Click to collapse
+1 From the posts Ive read the people that have had this issue have used the zedomax flash. Safest bet for anyone looking to go back to stock should stick with the odin method. I think there should be a warning in the index thread next to the [HOWTO] [ROM] How to Unroot SGH-T989 Painlessly link about the usb issue and also the kernel boot image even thou if people would just read the whole thread they would see that others have already reported the kernel image issue......

Returning the phone with that would land you an out if warranty fee
Sent from my SGH-T989 using Tapatalk

Mr_creeper_98 said:
I used the easiest unroot method ever
http://forum.xda-developers.com/showthread.php?t=1323878
Click to expand...
Click to collapse
If you flash this stock kernel zip before you flash the easiest unroot method ever it will give you stock kernel and remove any custom kernel logo.
http://db.tt/mYZw1F8w
Powered by the SGSII....

yeah but is was too late to know that, so there's no way we can use the samsung recovery mode with the install from SD option?

Is your recovery stock. ? If its not you can always put it your sd card and flash it that way.
le14 said:
yeah but is was too late to know that, so there's no way we can use the samsung recovery mode with the install from SD option?
Click to expand...
Click to collapse
Sent from my SGH-T989 using XDA App

Did I brick this already?

So I was messing around/not reading directions and trying to root with Chainfire's and also the Toolkit. I am not sure what happened. Long story short, I am now stuck at the galaxy note 2 startup screen. Is there a file I can Odin to get everything back to normal? I was trying to root the phone.

Are you able boot into download mode?

simplelife said:
Are you able boot into download mode?
Click to expand...
Click to collapse
Yes I can. Odin connects too.

http://forum.xda-developers.com/showthread.php?t=1932327
Is this a possible solution?

I will get details later but off the top of my head Odin fails at pit mapping or something like that

gk325 said:
http://forum.xda-developers.com/showthread.php?t=1932327
Is this a possible solution?
Click to expand...
Click to collapse
Chainfire try to said that solution for Mobile Odin & Triangle Away APP. You can try this solution
http://forum.xda-developers.com/showthread.php?t=1957209

I tried the recovery fix and this is what I get.

gk325 said:
I tried the recovery fix and this is what I get.
Click to expand...
Click to collapse
if you can turn it on all is not lost just be patient >Try to flash one of these kernels. http://forum.xda-developers.com/showthread.php?t=1960935

Dont use the factory usb cable

eleon3348 said:
Dont use the factory usb cable
Click to expand...
Click to collapse
Reason being what? What exactly is he supposed to use?
Sent from my SGH-T889 using Tapatalk 2

Thanks for the help, ended up just taking it back to the store, making up some excuse and they swapped it out no questions asked. Got the new one rooted already and running Frosty's ROM

ssCISengineer said:
Reason being what? What exactly is he supposed to use?
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Because when I tried to root galaxys2 with samsung factory cable odin was fail and appear the symbol of soft brick. And I tried with other pc in my house with the same result. I decided change the usb cable to a generic and try for last time and finally I pass the odin flash. Maybe a damage cable maybe not. he dont have nothing loose in this position. Sorry for my bad english and I happy for you for your new device

soft brick
can someone help me out i think i soft brick my note. the phone just stays in the same screen with the galaxy note 2 logo or whatever. i could get into recovery and get into odin mode. i have a rom in my external sd but its not letting my install it from there and when i try to mount in recovery it doesnt let me. please if anyone could help.

[Q] Did i brick my phone?

Ok, so i rooted my phone on my mac from galaxys3root.com
I then decided i wanted to root my phone from windows instead as i thought it was a more stable way (new to rooting)
so i went through the unrooting steps on that same website. downloaded triangle away and reset the binary.
step 2 was to put into download mode, so i help vol down, home and power button. screen went black and thats it.
now phone wont turn on, and wont go into download mode.
am i screwed?

So you were already rooted, then unrooted and tried to root again? Why? As long as the phone is rooted you can flash ROMs regardless of computer, as long as u can get all the files onto ur phone to flash in recovery
Sent from my SGH-I747 using xda app-developers app

DarthDerron said:
So you were already rooted, then unrooted and tried to root again? Why? As long as the phone is rooted you can flash ROMs regardless of computer, as long as u can get all the files onto ur phone to flash in recovery
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
im not sure, im new to rooting.
i thought it wasnt stable or something because rooting through mac you dont go into download mode or recovery mode
(i cant get into download or recovery. My phone is completely off, the only sign of life ive seen from it now is a red led light come on when i plug into usb without the batter in)

can anyone help?

MarkBonz said:
im not sure, im new to rooting.
i thought it wasnt stable or something because rooting through mac you dont go into download mode or recovery mode
(i cant get into download or recovery. My phone is completely off, the only sign of life ive seen from it now is a red led light come on when i plug into usb without the batter in)
Click to expand...
Click to collapse
Then sorry, nothing I can help you with

I suggest taking it to AT&T. That was the only sign of life I had after I dropped my rooted phone, they replaced it under warranty. To be clear, my phone was under two out-of-warranty conditions, and it was replaced because the cause of failure isn't so readily apparent in this case. Just say you don't know why it won't turn on. Too easy.

mag7ear appears
When plugged into my computer, it says
found new hardware QHSUSB_DLOAD
does that mean anything

I think that means it's dead, though I could be mistaken. I'm surprised no one recommended finding a USB jig. They're supposed to force the phone into download mode when nothing else will. It's not clear if that would work in this case, but they're extremely cheap.

MarkBonz said:
When plugged into my computer, it says
found new hardware QHSUSB_DLOAD
does that mean anything
Click to expand...
Click to collapse
Send it to samsung They can fix it for freee.
But for 60 bucks or so JTAG can get it done allittle bit quicker

Before you try sending it away, I would try downloading MSKIP's Galaxy S3 toolkit. Make sure you have all the relevant drivers and see if the toolkit is able to see it and kick it into download mode. You can find the download link here http://forum.xda-developers.com/forumdisplay.php?f=1633
There are very clear, explicit instructions provided with the toolkit - I would also take the time to view wwjoshdew's video, very helpful. If you are able to get the phone into download mode, re-flash a stock, rooted rom from here: http://forum.xda-developers.com/showthread.php?t=1739426
Not sure what else to tell you, but that's what I would try. Hope it helps.
-GB

GladdBag said:
Before you try sending it away, I would try downloading MSKIP's Galaxy S3 toolkit. Make sure you have all the relevant drivers and see if the toolkit is able to see it and kick it into download mode. You can find the download link here http://forum.xda-developers.com/forumdisplay.php?f=1633
There are very clear, explicit instructions provided with the toolkit - I would also take the time to view wwjoshdew's video, very helpful. If you are able to get the phone into download mode, re-flash a stock, rooted rom from here: http://forum.xda-developers.com/showthread.php?t=1739426
Not sure what else to tell you, but that's what I would try. Hope it helps.
-GB
Click to expand...
Click to collapse
thanks anyways, but toolkit cant read phone

[Q] Rogers SGH-I747M Hard Brick, JTAG only option?

Hello,
I just rooted my Samsung Galaxy S3 today. I copied several ROM zip files (i think there were 4) to my SD card to test out using MTP. As you may know, MTP (on Windows 7) is not the greatest experience. Since the copy was taking so long, I canceled it. I now know that when you do that MTP seems to leave the incomplete file there with the fill file size. I suspect the is the root of the issue.
I went to install the Omega v46.1 Jelly Bean 4.2.2 ROM after testing a different one that I was not happy with. Omega game up with its installer, everything seemed to work good. It asked to wipe the user data, and reboot the device. All looks good. I could not wait to try another ROM.
Blank screen.... waiting, waiting... Maybe they just have no boot logo.... waiting. Okay after waiting several hours for it to boot I thought maybe I would try to reboot and clear the user data and cache myself. Tried to reboot. Nothing happened. No vibration, no LED, not logo.
Cannot get into Download mode. Cannot get into Recovery.
Pull battery, wait. Put battery in while holding Volume key, Power button and Home. Nothing at all. Battery pull and waited a few hours. Tried again. Nothing. Panic starts.... I remembered the MTP file copy and checked the ROM zip files. Incomplete zip file.... Damn.
It is not easy to cover everything I have tried to fix it or all of the research I have done, but I'll try.
Researched bricked devices. Learned of hard vs soft. This does not appear to be soft to me, but why would my bootloader be damaged by installing this ROM?? I am new to this, but I think I understand the difference pretty good.
I spent the last few hours trying to find a micro USB cable that I could use to make a USB Jig. I did that using this guide and it did not help
http://forum.xda-developers.com/showthread.php?t=2121306
And this guide
http://forum.xda-developers.com/showthread.php?p=8822843
Researched the Jig more to make sure I got it right. Tested again with multimeter... It all looks good to me. Damn, it must be a real hard brick.
When I plug the phone into my PC without the battery in the phone I get a red LED.
When I plug it in with the battery in, I get no LED, no screen/logo, ect. Nothing. Windows does detect a device called "QHSUSB_DLOAD". I got the Qualcomm driver and QPTS hoping that there would be something that I could do... maybe backup my friend's bootrom and put it on my phone... The COM11 port from the device is not detected, so even if I could figure out a way to do what I said, I have no way to do it. Could be a Windows 7 unsigned drivers issue, but I have tried 3 different solutions to that without knowing how the device should look in Device Manager if the driver is accepted.
Looked for other solutions...
Old thread, HTC specific, not really any help... http://forum.xda-developers.com/showthread.php?t=822939
Bad news, need to send device back... http://forum.xda-developers.com/showthread.php?t=1651149
This looks possible, but I have not tried it yet because the steps are not that clear and it requires a Linux box, and I don't really want to dig into that can of worms right now. (which distro, which PC do I use, what software/packages are required, ect) http://forum.xda-developers.com/showthread.php?t=1916796
Possible solution with linux box... http://forum.xda-developers.com/showthread.php?t=2239451
Goes on to this one, a lot like the other linux option above... http://forum.xda-developers.com/showthread.php?t=2369125
If I am missing anything, please let me know. Is this Linux option really a possibility? Do I need a Rogers bootloader?
Perhaps I can use this idea to get my friend to back his up for me off his Rogers S3: http://forum.xda-developers.com/showthread.php?t=2374958
I could try the linux option tomorrow, or the JTAG tomorrow if I drive an hour away to a guy that can do it.

dege13 said:
Hello,
I just rooted my Samsung Galaxy S3 today. I copied several ROM zip files (i think there were 4) to my SD card to test out using MTP. As you may know, MTP (on Windows 7) is not the greatest experience. Since the copy was taking so long, I canceled it. I now know that when you do that MTP seems to leave the incomplete file there with the fill file size. I suspect the is the root of the issue.
I went to install the Omega v46.1 Jelly Bean 4.2.2 ROM after testing a different one that I was not happy with. Omega game up with its installer, everything seemed to work good. It asked to wipe the user data, and reboot the device. All looks good. I could not wait to try another ROM.
Blank screen.... waiting, waiting... Maybe they just have no boot logo.... waiting. Okay after waiting several hours for it to boot I thought maybe I would try to reboot and clear the user data and cache myself. Tried to reboot. Nothing happened. No vibration, no LED, not logo.
Cannot get into Download mode. Cannot get into Recovery.
Pull battery, wait. Put battery in while holding Volume key, Power button and Home. Nothing at all. Battery pull and waited a few hours. Tried again. Nothing. Panic starts.... I remembered the MTP file copy and checked the ROM zip files. Incomplete zip file.... Damn.
It is not easy to cover everything I have tried to fix it or all of the research I have done, but I'll try.
Researched bricked devices. Learned of hard vs soft. This does not appear to be soft to me, but why would my bootloader be damaged by installing this ROM?? I am new to this, but I think I understand the difference pretty good.
I spent the last few hours trying to find a micro USB cable that I could use to make a USB Jig. I did that using this guide and it did not help
http://forum.xda-developers.com/showthread.php?t=2121306
And this guide
http://forum.xda-developers.com/showthread.php?p=8822843
Researched the Jig more to make sure I got it right. Tested again with multimeter... It all looks good to me. Damn, it must be a real hard brick.
When I plug the phone into my PC without the battery in the phone I get a red LED.
When I plug it in with the battery in, I get no LED, no screen/logo, ect. Nothing. Windows does detect a device called "QHSUSB_DLOAD". I got the Qualcomm driver and QPTS hoping that there would be something that I could do... maybe backup my friend's bootrom and put it on my phone... The COM11 port from the device is not detected, so even if I could figure out a way to do what I said, I have no way to do it. Could be a Windows 7 unsigned drivers issue, but I have tried 3 different solutions to that without knowing how the device should look in Device Manager if the driver is accepted.
Looked for other solutions...
Old thread, HTC specific, not really any help... http://forum.xda-developers.com/showthread.php?t=822939
Bad news, need to send device back... http://forum.xda-developers.com/showthread.php?t=1651149
This looks possible, but I have not tried it yet because the steps are not that clear and it requires a Linux box, and I don't really want to dig into that can of worms right now. (which distro, which PC do I use, what software/packages are required, ect) http://forum.xda-developers.com/showthread.php?t=1916796
Possible solution with linux box... http://forum.xda-developers.com/showthread.php?t=2239451
Goes on to this one, a lot like the other linux option above... http://forum.xda-developers.com/showthread.php?t=2369125
If I am missing anything, please let me know. Is this Linux option really a possibility? Do I need a Rogers bootloader?
Perhaps I can use this idea to get my friend to back his up for me off his Rogers S3: http://forum.xda-developers.com/showthread.php?t=2374958
I could try the linux option tomorrow, or the JTAG tomorrow if I drive an hour away to a guy that can do it.
Click to expand...
Click to collapse
I had the exactly same thing as you . I flashed the omega 4.1.2 rom and got the black screen.....
what can we do now?

yaoll78 said:
I had the exactly same thing as you . I flashed the omega 4.1.2 rom and got the black screen.....
what can we do now?
Click to expand...
Click to collapse
You guys flashed a ROM for the international S3. Check the forum you got that ROM from.
Quite sure JTAG is a good place to start now.

SD CARD
hi there
i have an SDcard of 4GB i tried on 4 S3 i747M hard bricked phones its worked ....this card let them alive to download mode by pressing volume down key +home key + power. i want to share this image but when ever i connect this card to my PC (windows) its shows (need to format your card)
is there any software so i can make image and share...to help those who hard-bricked their phones.
regards

rasgula said:
hi there
i have an SDcard of 4GB i tried on 4 S3 i747M hard bricked phones its worked ....this card let them alive to download mode by pressing volume down key +home key + power. i want to share this image but when ever i connect this card to my PC (windows) its shows (need to format your card)
is there any software so i can make image and share...to help those who hard-bricked their phones.
regards
Click to expand...
Click to collapse
Unplug and plug till pc recognize it with your files on it. I need that image so if you could share it, it would be appreciate.

I want to share but how to extract the image from sd card?
Sent from my C6506 using Tapatalk

rasgula said:
I want to share but how to extract the image from sd card?
Sent from my C6506 using Tapatalk
Click to expand...
Click to collapse
By Mr.X ''If you want to create your own dump from a friends device the command in a rooted adb shell would be as follows but not exact depending where you want the dump file to end up being on your sd cards. "dd if=/dev/block/mmcblk0 of=/storage/sdcard1/debrick.bin bs=1024 count=81920" That is what I used my my co-workers CM 10.2 rom to get the 4.3 bootloader/debrick dump. NOTE: the device has to be rooted with a working busybox that supports the dd command''

Hello, i have the same problem with an i747m, i'd appreciate if some one can share the SD image to fix this thx all for your help and i hope it wont take to long,

Cerisan said:
Hello, i have the same problem with an i747m, i'd appreciate if some one can share the SD image to fix this thx all for your help and i hope it wont take to long,
Click to expand...
Click to collapse
You flashed the wrong image too? Your phone also doesn't go into download or recovery?

Unbrink was successful
audit13 said:
You flashed the wrong image too? Your phone also doesn't go into download or recovery?
Click to expand...
Click to collapse
Hello, i hardbricked my phone with other method, but it had the same symptoms as your bricked phones, here is a link to a SD image that worked like a charm for me, tested with a 64GB micro SD, and used win32diskmanager so i can create the SD in windows, cheers and good luck unbriking your phone
www(mediafire(com/download/0vg9sgcvk4zuwm0/debrick-SGH-I747M-UEMK5.img
PS The unbrink was successful , i really dont remember all the posts where i get those files but here's the file for this thread

salam i downloaded 4.4.2 rom from sammobile.com and flashed it with mobile odin everything was cool it installed sucessfully but my sim was not detected so i reebooted it but nothing happened instead it was hard bricked so i request you to give a debrick file for 4.4.2 as 4.3 debrick file does nothing for me thanks in advance waiting for ur reply
---------- Post added at 11:22 AM ---------- Previous post was at 11:15 AM ----------
rasgula said:
hi there
i have an SDcard of 4GB i tried on 4 S3 i747M hard bricked phones its worked ....this card let them alive to download mode by pressing volume down key +home key + power. i want to share this image but when ever i connect this card to my PC (windows) its shows (need to format your card)
is there any software so i can make image and share...to help those who hard-bricked their phones.
regards
Click to expand...
Click to collapse
sir i downloaded 4.4.2 rom from sammobile.com and flashed it with mobile odin everything was cool it installed sucessfully but my sim was not detected so i reebooted it but nothing happened instead it was hard bricked so i request you to give a debrick file for 4.4.2 as 4.3 debrick file does nothing for me thanks in advance waiting for ur reply

Try this
www(mediafire(com/download/0vg9sgcvk4zuwm0/debrick-SGH-I747M-UEMK5.img
Sent from my SM-N900W8 using Tapatalk

Just fyi, in case you didn't see my other posts about it, updating from 4.3 to 4.4.2 using Mobile Odin will brick the device. MO cannot flash the full firmware so your brick was caused by flashing the modem onto 4.3 firmware.

rasgula said:
Try this
www(mediafire(com/download/0vg9sgcvk4zuwm0/debrick-SGH-I747M-UEMK5.img
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
plz provide ur cell no so that we can discuss it easily this file didnt worked for me
---------- Post added at 08:52 AM ---------- Previous post was at 08:47 AM ----------
DocHoliday77 said:
Just fyi, in case you didn't see my other posts about it, updating from 4.3 to 4.4.2 using Mobile Odin will brick the device. MO cannot flash the full firmware so your brick was caused by flashing the modem onto 4.3 firmware.
Click to expand...
Click to collapse
sir what to do now? as 4.3 debrick img above didnt worked for me

Do you have an I747M? If you have the I747 that image won't work.
I just posted two 4.3 images to try in the debrick thread. This should probably be discussed there anyway just so all of the info is easy to find.

DocHoliday77 said:
Do you have an I747M? If you have the I747 that image won't work.
I just posted two 4.3 images to try in the debrick thread. This should probably be discussed there anyway just so all of the info is easy to find.
Click to expand...
Click to collapse
its i747m rogers bricked it by flashing 4.4.2 with mobile odin

Mobile odin cannot flash the full firmware, so you ended up with the 4.4.2 modem on 4.3 firmware which we know will brick.
You will need to use a debrick.img from another I747M, probably from another Rogers one specifically. Not sure if it'll work or not from another carrier.
Note that we have yet to get it working for any device that bricked by flashing the modem. Watch the debrick thread for updates.

HELP Note II stuck on splash screen

Dear all. I have a note II that has gone wild. The phone was working fine but then I received a note 4 and put the note 2 aside. Then I was trying to install root and was able to do so by installing TWRP V2.8.3 and everything went smooth and the phone was rooted. I then used the phone for a while but switched to the note 4 after. Now, 5 months after, I wanted to check something on my olde note II. I charged the phone and switched it on but it was stuck on the Galaxy note II screen I rebooted then rebooted but still the same. I went in the TWRP recovery to try to do something but I was not able to because it says that it cant mount storage, cant mount efs, cant mount data, cant mount cache and cant mount system.
Then I have decided to install the firmware image from zipped file but that did not work as it sees that the internal and external storags are 0 and cant mount them.
Then I opted to try and install the firmware PDA through Odin but that also did not work as Odin was not able to detect the phone. Now I'm clueless and not sure what to do the only thing I'm able to do is boot in TWRP recovery and that is all. Can any one help.
My phone had the latest official rom from samsung the 4.4.2
Please help

classic, just search. there is a thread with tutorial how to get your n2 back to life. you could also have sds, but try different odin and flash with pit

Ok now I'm in a worse situation. I have managed to get to the download mode and connected it to ODIN and tried to flash with the stock rom but at the end of the writing process it failed and started to get a message on the phone to connect my device to kies and try again. I tried that but did not do anything. Then I tried Odin again but this time I unticked the auto reboot. then clicked start. The same thing happened as before and writing failed now though my phone is blank it does not show anything and it does not want to turn on and no LED that is turning on nor the charging icon. I searched the net and someone suggested that the battery is damaged. I replaced the battery but still no go. Please I really need to get that phone back alive. I think I bricked it. any ideas or directions to help me with this annoying case. I cant even boot to recovery nor download please help

No one can help

sambosat said:
No one can help
Click to expand...
Click to collapse
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.

Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back

sambosat said:
No one can help
Click to expand...
Click to collapse
sambosat said:
Finally someone gave me an advise. Thank you Chris. The problem is the phone is blank and cant go to download mode. It looks like that I have bricked it and not sure how to get back
Click to expand...
Click to collapse
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:

Christopher11 said:
Odin dont detect Phone in Download mode, right?
So test another USB hub or an other or Official Samsung USB connector.. When nothing work try another PC and Flash the Firmware in PDA.
Click to expand...
Click to collapse
Christopher11 said:
Can you make a Video what exactly happens when you :Remove battery and Restart phone, Restart phone into Download Mode and/or Recovery? Thx :good:
Click to expand...
Click to collapse
As I said when I remove the battery and insert it back the phone remains blank no response to any button pressed.
What I did is that my phone was stuck on opening screen samsung screen. Then someone suggested to flash it with the stock rom. So I went to Sammobile site and downloaded the latest firmware. I tried to install it to my phone using ODIN and just before the end. ODIN failed. I tried it the second time and the same happened. then the third time I read that I have to untick auto reboot. I did and tried ODIN for the 3rd time and on the third trial I got the same fail message and then I wanted to boot into download mode for the forth time but this time the phone went dead and not responding to any button press. I hope that this explains the situation

Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2

Christopher11 said:
Hmmm.. That Sounds really tricky.. Never saw a Device before thats so bricked.. When really nothing worked from this Forum may you let an expert give a look on your Phone, i know some official Samsung shops, maybe they can help.. Sry that i cant hell you like you want it and sry for my Bad English.. Good Luck with your Note 2
Click to expand...
Click to collapse
No worries bro. At least you are trying. I have never seen this before either and I'm stumped and where I'm I dont think I can find any samsung pro shop. All what they are going to say is the motherboard is dead and you need to change it. I do have another phone but I hate it when a devise does this to me

Develop Bugs

welcome